@windypro-rourou/dsh-eda 0.1.4 → 0.1.5

package/skill/references/classes/IPCB_PrimitiveLine.md

@@ -1,1639 +1,1639 @@
-# IPCB\_PrimitiveLine class
-
-Line primitive
-
-## Signature
-
-```typescript
-class IPCB_PrimitiveLine implements IPCB_Primitive
-```
-**Implements:** [IPCB\_Primitive](../interfaces/IPCB_Primitive.md)
-
-## Remarks
-
-Both lines and arc lines are wires, corresponding to the line traces and arc traces on the canvas
-
-## Methods
-
-<table><thead><tr><th>
-
-Method
-
-</th><th>
-
-Modifiers
-
-</th><th>
-
-Description
-
-</th></tr></thead>
-<tbody><tr><td>
-
-[done()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Apply the changes to the primitives to the canvas
-
-</td></tr>
-<tr><td>
-
-[getAdjacentPrimitives()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Get Adjacent primitive objects
-
-</td></tr>
-<tr><td>
-
-[getEntireTrack(includeVias)](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Get the entire wire
-
-</td></tr>
-<tr><td>
-
-[getEntireTrack(includeVias)](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Get the entire wire
-
-</td></tr>
-<tr><td>
-
-[getState\_EndX()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Get the property state: end position X
-
-</td></tr>
-<tr><td>
-
-[getState\_EndY()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Get the property state: end position Y
-
-</td></tr>
-<tr><td>
-
-[getState\_Layer()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Get the property state: Layer
-
-</td></tr>
-<tr><td>
-
-[getState\_LineWidth()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Get the property state: Line width
-
-</td></tr>
-<tr><td>
-
-[getState\_Net()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Get the property state: net name
-
-</td></tr>
-<tr><td>
-
-[getState\_PrimitiveId()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Get the property state: primitive ID
-
-</td></tr>
-<tr><td>
-
-[getState\_PrimitiveLock()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Get the property state: whether it is locked
-
-</td></tr>
-<tr><td>
-
-[getState\_PrimitiveType()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Get the property state: primitive type
-
-</td></tr>
-<tr><td>
-
-[getState\_StartX()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Get the property state: start position X
-
-</td></tr>
-<tr><td>
-
-[getState\_StartY()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Get the property state: start position Y
-
-</td></tr>
-<tr><td>
-
-[isAsync()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Query whether the primitive is an async primitive
-
-</td></tr>
-<tr><td>
-
-[reset()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Reset the async primitive to the current canvas state
-
-</td></tr>
-<tr><td>
-
-[setState\_EndX(endX)](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Set the property state: end position X
-
-</td></tr>
-<tr><td>
-
-[setState\_EndY(endY)](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Set the property state: end position Y
-
-</td></tr>
-<tr><td>
-
-[setState\_Layer(layer)](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Set the property state: Layer
-
-</td></tr>
-<tr><td>
-
-[setState\_LineWidth(lineWidth)](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Set the property state: Line width
-
-</td></tr>
-<tr><td>
-
-[setState\_Net(net)](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Set the property state: net name
-
-</td></tr>
-<tr><td>
-
-[setState\_PrimitiveLock(primitiveLock)](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Set the property state: whether it is locked
-
-</td></tr>
-<tr><td>
-
-[setState\_StartX(startX)](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Set the property state: start position X
-
-</td></tr>
-<tr><td>
-
-[setState\_StartY(startY)](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-**_(BETA)_** Set the property state: start position Y
-
-</td></tr>
-<tr><td>
-
-[toAsync()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Convert Primitive to Async primitive
-
-</td></tr>
-<tr><td>
-
-[toSync()](./IPCB_PrimitiveLine.md)
-
-</td><td>
-
-</td><td>
-
-Convert Primitive to Sync primitive
-
-</td></tr>
-</tbody></table>
-
----
-
-## 方法详情
-
-### done
-
-# IPCB\_PrimitiveLine.done() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Apply the changes to the primitives to the canvas
-
-## Signature
-
-```typescript
-function done(): Promise<IPCB_PrimitiveLine>;
-```
-
-## Returns
-
-Promise&lt;[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)<!-- -->&gt;
-
-Line primitive object
-
-## Example
-
-```javascript
-// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
-const x = 42000 + (Math.floor(Math.random() * 100000));
-const y = 2000 + (Math.floor(Math.random() * 100000));
-
-// 2. 创建一条测试直线走线
-const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
-
-// 3. 切换异步模式，连续累计两处修改（线宽 + 换层）
-const asyncLine = line.toAsync();
-asyncLine.setState_LineWidth(24);
-asyncLine.setState_Layer(2);
-
-// 4. 一次性提交到画布
-await asyncLine.done();
-
-// 5. 从画布重新读取，确认两处修改都已生效（保留现场供观察）
-const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
-
-console.log('lineWidth:', 10, '→', refetched.getState_LineWidth());
-console.log('layer:', 1, '→', refetched.getState_Layer());
-```
-
-### getadjacentprimitives
-
-# IPCB\_PrimitiveLine.getAdjacentPrimitives() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Get Adjacent primitive objects
-
-## Signature
-
-```typescript
-function getAdjacentPrimitives(): Promise<
-	Array<IPCB_PrimitiveLine | IPCB_PrimitiveVia | IPCB_PrimitiveArc>
->;
-```
-
-## Returns
-
-Promise&lt;Array&lt;[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md) \| [IPCB\_PrimitiveVia](./IPCB_PrimitiveVia.md) \| [IPCB\_PrimitiveArc](./IPCB_PrimitiveArc.md)<!-- -->&gt;&gt;
-
-Adjacent line, via, and arc-line primitive objects
-
-## Remarks
-
-It will get the line, via, and arc-line primitive objects directly connected to both ends of the line
-
-## Example
-
-```javascript
-// 1. 创建一条直线走线，终点落在 (7500, 7000)
-const line = await eda.pcb_PrimitiveLine.create('', 1, 7000, 7000, 7500, 7000, 10);
-
-// 2. 创建一段圆弧，起点与直线终点重合，两段构成一整段导线
-const arc = await eda.pcb_PrimitiveArc.create('', 1, 7500, 7000, 7800, 7300, 90, 10, 1, false);
-
-// 3. 获取与直线直接相连的图元，并读出各自的类型
-const adjacent = await line.getAdjacentPrimitives();
-
-// 4. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
-await eda.pcb_PrimitiveArc.delete([arc.getState_PrimitiveId()]);
-
-console.log('adjacent count:', adjacent.length);
-adjacent.forEach((p, i) => {
-	console.log(`adjacent[${i}] type:`, p.getState_PrimitiveType());
-});
-```
-
-### getentiretrack
-
-# IPCB\_PrimitiveLine.getEntireTrack() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Get the entire wire
-
-## Signature
-
-```typescript
-function getEntireTrack(includeVias: false): Promise<Array<IPCB_PrimitiveLine | IPCB_PrimitiveArc>>;
-```
-
-## Parameters
-
-<table><thead><tr><th>
-
-Parameter
-
-</th><th>
-
-Type
-
-</th><th>
-
-Description
-
-</th></tr></thead>
-<tbody><tr><td>
-
-includeVias
-
-</td><td>
-
-false
-
-</td><td>
-
-Whether to include the vias at both ends of the wire
-
-</td></tr>
-</tbody></table>
-
-## Returns
-
-Promise&lt;Array&lt;[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md) \| [IPCB\_PrimitiveArc](./IPCB_PrimitiveArc.md)<!-- -->&gt;&gt;
-
-All lines and arc lines in the entire wire
-
-## Example
-
-```javascript
-// 1. 创建一条直线走线，终点落在 (7500, 7000)
-const line = await eda.pcb_PrimitiveLine.create('', 1, 7000, 7000, 7500, 7000, 10);
-
-// 2. 创建一段圆弧，起点与直线终点重合，两段构成一整段导线
-const arc = await eda.pcb_PrimitiveArc.create('', 1, 7500, 7000, 7800, 7300, 90, 10, 1, false);
-
-// 3. 只取导线内的直线和圆弧
-const trackOnly = await line.getEntireTrack(false);
-
-// 4. 连两端过孔一起取（本例两端没有过孔，数量不变）
-const trackWithVias = await line.getEntireTrack(true);
-
-// 5. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
-await eda.pcb_PrimitiveArc.delete([arc.getState_PrimitiveId()]);
-
-console.log('track(false) count:', trackOnly.length);
-trackOnly.forEach((p, i) => {
-	console.log(`track(false)[${i}] type:`, p.getState_PrimitiveType());
-});
-console.log('track(true) count:', trackWithVias.length);
-```
-
-### getentiretrack_1
-
-# IPCB\_PrimitiveLine.getEntireTrack() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Get the entire wire
-
-## Signature
-
-```typescript
-function getEntireTrack(
-	includeVias: true,
-): Promise<Array<IPCB_PrimitiveLine | IPCB_PrimitiveArc | IPCB_PrimitiveVia>>;
-```
-
-## Parameters
-
-<table><thead><tr><th>
-
-Parameter
-
-</th><th>
-
-Type
-
-</th><th>
-
-Description
-
-</th></tr></thead>
-<tbody><tr><td>
-
-includeVias
-
-</td><td>
-
-true
-
-</td><td>
-
-Whether to include the vias at both ends of the wire
-
-</td></tr>
-</tbody></table>
-
-## Returns
-
-Promise&lt;Array&lt;[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md) \| [IPCB\_PrimitiveArc](./IPCB_PrimitiveArc.md) \| [IPCB\_PrimitiveVia](./IPCB_PrimitiveVia.md)<!-- -->&gt;&gt;
-
-All lines and arc lines in the entire wire, as well as the vias connected at both ends (if any)
-
-### getstate_endx
-
-# IPCB\_PrimitiveLine.getState\_EndX() method
-
-Get the property state: end position X
-
-## Signature
-
-```typescript
-function getState_EndX(): number;
-```
-
-## Returns
-
-number
-
-End position X
-
-## Example
-
-```javascript
-// 1. 创建一条测试直线，终点 (1600, 1000)
-const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
-
-// 2. 读取终点 X
-const endX = line.getState_EndX();
-
-// 3. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
-
-console.log('endX:', endX);
-```
-
-### getstate_endy
-
-# IPCB\_PrimitiveLine.getState\_EndY() method
-
-Get the property state: end position Y
-
-## Signature
-
-```typescript
-function getState_EndY(): number;
-```
-
-## Returns
-
-number
-
-End position Y
-
-## Example
-
-```javascript
-// 1. 创建一条测试直线，终点 (1600, 1000)
-const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
-
-// 2. 读取终点 Y
-const endY = line.getState_EndY();
-
-// 3. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
-
-console.log('endY:', endY);
-```
-
-### getstate_layer
-
-# IPCB\_PrimitiveLine.getState\_Layer() method
-
-Get the property state: Layer
-
-## Signature
-
-```typescript
-function getState_Layer(): TPCB_LayersOfLine;
-```
-
-## Returns
-
-[TPCB\_LayersOfLine](../types/TPCB_LayersOfLine.md)
-
-Layer
-
-## Example
-
-```javascript
-// 1. 创建一条顶层（1）测试直线
-const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
-
-// 2. 读取所在层
-const layer = line.getState_Layer();
-
-// 3. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
-
-console.log('layer:', layer);
-```
-
-### getstate_linewidth
-
-# IPCB\_PrimitiveLine.getState\_LineWidth() method
-
-Get the property state: Line width
-
-## Signature
-
-```typescript
-function getState_LineWidth(): number;
-```
-
-## Returns
-
-number
-
-Line width
-
-## Example
-
-```javascript
-// 1. 创建一条 10mil 线宽的测试直线
-const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
-
-// 2. 读取线宽
-const lineWidth = line.getState_LineWidth();
-
-// 3. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
-
-console.log('lineWidth:', lineWidth);
-```
-
-### getstate_net
-
-# IPCB\_PrimitiveLine.getState\_Net() method
-
-Get the property state: net name
-
-## Signature
-
-```typescript
-function getState_Net(): string;
-```
-
-## Returns
-
-string
-
-Net name
-
-## Example
-
-```javascript
-// 1. 创建一条指定网络的测试直线
-const line = await eda.pcb_PrimitiveLine.create('嘉立创示例_NET', 1, 1000, 1000, 1600, 1000, 10);
-
-// 2. 读取网络名称
-const net = line.getState_Net();
-
-// 3. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
-
-console.log('net:', net);
-```
-
-### getstate_primitiveid
-
-# IPCB\_PrimitiveLine.getState\_PrimitiveId() method
-
-Get the property state: primitive ID
-
-## Signature
-
-```typescript
-function getState_PrimitiveId(): string;
-```
-
-## Returns
-
-string
-
-Primitive ID
-
-## Example
-
-```javascript
-// 1. 创建一条测试直线
-const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
-
-// 2. 读取图元 ID
-const primitiveId = line.getState_PrimitiveId();
-
-// 3. 用该 ID 从画布重新取回直线，验证 ID 有效
-const refetched = await eda.pcb_PrimitiveLine.get(primitiveId);
-
-// 4. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([primitiveId]);
-
-console.log('primitiveId:', primitiveId);
-console.log('refetched type:', refetched.getState_PrimitiveType());
-```
-
-### getstate_primitivelock
-
-# IPCB\_PrimitiveLine.getState\_PrimitiveLock() method
-
-Get the property state: whether it is locked
-
-## Signature
-
-```typescript
-function getState_PrimitiveLock(): boolean;
-```
-
-## Returns
-
-boolean
-
-Whether it is locked
-
-## Example
-
-```javascript
-// 1. 创建一条测试直线（默认不锁定）
-const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
-
-// 2. 读取锁定状态
-const locked = line.getState_PrimitiveLock();
-
-// 3. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
-
-console.log('locked:', locked);
-```
-
-### getstate_primitivetype
-
-# IPCB\_PrimitiveLine.getState\_PrimitiveType() method
-
-Get the property state: primitive type
-
-## Signature
-
-```typescript
-function getState_PrimitiveType(): EPCB_PrimitiveType;
-```
-
-## Returns
-
-[EPCB\_PrimitiveType](../enums/EPCB_PrimitiveType.md)
-
-Primitive type
-
-## Example
-
-```javascript
-// 1. 创建一条测试直线
-const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
-
-// 2. 读取图元类型
-const type = line.getState_PrimitiveType();
-
-// 3. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
-
-console.log('type:', type);
-```
-
-### getstate_startx
-
-# IPCB\_PrimitiveLine.getState\_StartX() method
-
-Get the property state: start position X
-
-## Signature
-
-```typescript
-function getState_StartX(): number;
-```
-
-## Returns
-
-number
-
-Start position X
-
-## Example
-
-```javascript
-// 1. 创建一条测试直线，起点 (1000, 1000)
-const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
-
-// 2. 读取起点 X
-const startX = line.getState_StartX();
-
-// 3. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
-
-console.log('startX:', startX);
-```
-
-### getstate_starty
-
-# IPCB\_PrimitiveLine.getState\_StartY() method
-
-Get the property state: start position Y
-
-## Signature
-
-```typescript
-function getState_StartY(): number;
-```
-
-## Returns
-
-number
-
-Start position Y
-
-## Example
-
-```javascript
-// 1. 创建一条测试直线，起点 (1000, 1000)
-const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
-
-// 2. 读取起点 Y
-const startY = line.getState_StartY();
-
-// 3. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
-
-console.log('startY:', startY);
-```
-
-### isasync
-
-# IPCB\_PrimitiveLine.isAsync() method
-
-Query whether the primitive is an async primitive
-
-## Signature
-
-```typescript
-function isAsync(): boolean;
-```
-
-## Returns
-
-boolean
-
-Whether Is async primitive
-
-## Example
-
-```javascript
-// 1. 创建一条测试直线，读出创建后的默认模式
-const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
-const asyncOnCreate = line.isAsync();
-
-// 2. 切换到同步模式再查询一次，对比两种模式
-line.toSync();
-const asyncAfterToSync = line.isAsync();
-
-// 3. 清理测试图元（查询类案例不留测试对象）
-await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
-
-console.log('isAsync on create:', asyncOnCreate);
-console.log('isAsync after toSync:', asyncAfterToSync);
-```
-
-### reset
-
-# IPCB\_PrimitiveLine.reset() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Reset the async primitive to the current canvas state
-
-## Signature
-
-```typescript
-function reset(): Promise<IPCB_PrimitiveLine>;
-```
-
-## Returns
-
-Promise&lt;[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)<!-- -->&gt;
-
-Line primitive object
-
-## Example
-
-```javascript
-// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
-const x = 46000 + (Math.floor(Math.random() * 100000));
-const y = 2000 + (Math.floor(Math.random() * 100000));
-
-// 2. 创建一条 10mil 线宽的测试直线
-const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
-
-// 3. 切换异步模式，累计一处未提交的线宽修改（10 → 99）
-const asyncLine = line.toAsync();
-asyncLine.setState_LineWidth(99);
-
-// 4. 重置：丢弃未提交的修改，回到画布当前状态
-await asyncLine.reset();
-
-// 5. 从画布重新读取，线宽仍是 10（保留现场供观察）
-const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
-
-console.log('lineWidth after reset:', refetched.getState_LineWidth());
-```
-
-### setstate_endx
-
-# IPCB\_PrimitiveLine.setState\_EndX() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Set the property state: end position X
-
-## Signature
-
-```typescript
-function setState_EndX(endX: number): IPCB_PrimitiveLine;
-```
-
-## Parameters
-
-<table><thead><tr><th>
-
-Parameter
-
-</th><th>
-
-Type
-
-</th><th>
-
-Description
-
-</th></tr></thead>
-<tbody><tr><td>
-
-endX
-
-</td><td>
-
-number
-
-</td><td>
-
-End position X
-
-</td></tr>
-</tbody></table>
-
-## Returns
-
-[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
-
-Line primitive object
-
-## Example
-
-```javascript
-// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
-const x = 14000 + (Math.floor(Math.random() * 100000));
-const y = 2000 + (Math.floor(Math.random() * 100000));
-
-// 2. 创建一条测试直线，终点 (x + 600, y)
-const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
-
-// 3. 读取修改前的终点 X
-const before = line.getState_EndX();
-
-// 4. 切换异步模式并拉长终点（右移 300mil）
-const asyncLine = line.toAsync();
-asyncLine.setState_EndX(x + 900);
-await asyncLine.done();
-
-// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
-const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
-const after = refetched.getState_EndX();
-
-console.log('endX:', before, '→', after);
-```
-
-### setstate_endy
-
-# IPCB\_PrimitiveLine.setState\_EndY() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Set the property state: end position Y
-
-## Signature
-
-```typescript
-function setState_EndY(endY: number): IPCB_PrimitiveLine;
-```
-
-## Parameters
-
-<table><thead><tr><th>
-
-Parameter
-
-</th><th>
-
-Type
-
-</th><th>
-
-Description
-
-</th></tr></thead>
-<tbody><tr><td>
-
-endY
-
-</td><td>
-
-number
-
-</td><td>
-
-End position Y
-
-</td></tr>
-</tbody></table>
-
-## Returns
-
-[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
-
-Line primitive object
-
-## Example
-
-```javascript
-// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
-const x = 18000 + (Math.floor(Math.random() * 100000));
-const y = 2000 + (Math.floor(Math.random() * 100000));
-
-// 2. 创建一条测试直线，终点 (x + 600, y)
-const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
-
-// 3. 读取修改前的终点 Y
-const before = line.getState_EndY();
-
-// 4. 切换异步模式并抬高终点（上移 300mil）
-const asyncLine = line.toAsync();
-asyncLine.setState_EndY(y + 300);
-await asyncLine.done();
-
-// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
-const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
-const after = refetched.getState_EndY();
-
-console.log('endY:', before, '→', after);
-```
-
-### setstate_layer
-
-# IPCB\_PrimitiveLine.setState\_Layer() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Set the property state: Layer
-
-## Signature
-
-```typescript
-function setState_Layer(layer: TPCB_LayersOfLine): IPCB_PrimitiveLine;
-```
-
-## Parameters
-
-<table><thead><tr><th>
-
-Parameter
-
-</th><th>
-
-Type
-
-</th><th>
-
-Description
-
-</th></tr></thead>
-<tbody><tr><td>
-
-layer
-
-</td><td>
-
-[TPCB\_LayersOfLine](../types/TPCB_LayersOfLine.md)
-
-</td><td>
-
-Layer
-
-</td></tr>
-</tbody></table>
-
-## Returns
-
-[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
-
-Line primitive object
-
-## Example
-
-```javascript
-// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
-const x = 22000 + (Math.floor(Math.random() * 100000));
-const y = 2000 + (Math.floor(Math.random() * 100000));
-
-// 2. 创建一条顶层（1）测试直线
-const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
-
-// 3. 读取修改前的层
-const before = line.getState_Layer();
-
-// 4. 切换异步模式并换层（顶层 1 → 底层 2）
-const asyncLine = line.toAsync();
-asyncLine.setState_Layer(2);
-await asyncLine.done();
-
-// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
-const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
-const after = refetched.getState_Layer();
-
-console.log('layer:', before, '→', after);
-```
-
-### setstate_linewidth
-
-# IPCB\_PrimitiveLine.setState\_LineWidth() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Set the property state: Line width
-
-## Signature
-
-```typescript
-function setState_LineWidth(lineWidth: number): IPCB_PrimitiveLine;
-```
-
-## Parameters
-
-<table><thead><tr><th>
-
-Parameter
-
-</th><th>
-
-Type
-
-</th><th>
-
-Description
-
-</th></tr></thead>
-<tbody><tr><td>
-
-lineWidth
-
-</td><td>
-
-number
-
-</td><td>
-
-Line width
-
-</td></tr>
-</tbody></table>
-
-## Returns
-
-[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
-
-Line primitive object
-
-## Example
-
-```javascript
-// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
-const x = 26000 + (Math.floor(Math.random() * 100000));
-const y = 2000 + (Math.floor(Math.random() * 100000));
-
-// 2. 创建一条 10mil 线宽的测试直线
-const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
-
-// 3. 读取修改前的线宽
-const before = line.getState_LineWidth();
-
-// 4. 切换异步模式并加宽（10 → 24）
-const asyncLine = line.toAsync();
-asyncLine.setState_LineWidth(24);
-await asyncLine.done();
-
-// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
-const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
-const after = refetched.getState_LineWidth();
-
-console.log('lineWidth:', before, '→', after);
-```
-
-### setstate_net
-
-# IPCB\_PrimitiveLine.setState\_Net() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Set the property state: net name
-
-## Signature
-
-```typescript
-function setState_Net(net: string): IPCB_PrimitiveLine;
-```
-
-## Parameters
-
-<table><thead><tr><th>
-
-Parameter
-
-</th><th>
-
-Type
-
-</th><th>
-
-Description
-
-</th></tr></thead>
-<tbody><tr><td>
-
-net
-
-</td><td>
-
-string
-
-</td><td>
-
-Net name
-
-</td></tr>
-</tbody></table>
-
-## Returns
-
-[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
-
-Line primitive object
-
-## Example
-
-```javascript
-// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
-const x = 30000 + (Math.floor(Math.random() * 100000));
-const y = 2000 + (Math.floor(Math.random() * 100000));
-
-// 2. 创建一条无网络的测试直线
-const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
-
-// 3. 读取修改前的网络名称
-const before = line.getState_Net();
-
-// 4. 切换异步模式并指定网络（'' → '嘉立创示例_NET'）
-const asyncLine = line.toAsync();
-asyncLine.setState_Net('嘉立创示例_NET');
-await asyncLine.done();
-
-// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
-const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
-const after = refetched.getState_Net();
-
-console.log('net:', before, '→', after);
-```
-
-### setstate_primitivelock
-
-# IPCB\_PrimitiveLine.setState\_PrimitiveLock() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Set the property state: whether it is locked
-
-## Signature
-
-```typescript
-function setState_PrimitiveLock(primitiveLock: boolean): IPCB_PrimitiveLine;
-```
-
-## Parameters
-
-<table><thead><tr><th>
-
-Parameter
-
-</th><th>
-
-Type
-
-</th><th>
-
-Description
-
-</th></tr></thead>
-<tbody><tr><td>
-
-primitiveLock
-
-</td><td>
-
-boolean
-
-</td><td>
-
-Whether it is locked
-
-</td></tr>
-</tbody></table>
-
-## Returns
-
-[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
-
-Line primitive object
-
-## Example
-
-```javascript
-// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
-const x = 34000 + (Math.floor(Math.random() * 100000));
-const y = 2000 + (Math.floor(Math.random() * 100000));
-
-// 2. 创建一条测试直线（默认不锁定）
-const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
-
-// 3. 读取修改前的锁定状态
-const before = line.getState_PrimitiveLock();
-
-// 4. 切换异步模式并锁定（false → true）
-const asyncLine = line.toAsync();
-asyncLine.setState_PrimitiveLock(true);
-await asyncLine.done();
-
-// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
-const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
-const after = refetched.getState_PrimitiveLock();
-
-console.log('locked:', before, '→', after);
-```
-
-### setstate_startx
-
-# IPCB\_PrimitiveLine.setState\_StartX() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Set the property state: start position X
-
-## Signature
-
-```typescript
-function setState_StartX(startX: number): IPCB_PrimitiveLine;
-```
-
-## Parameters
-
-<table><thead><tr><th>
-
-Parameter
-
-</th><th>
-
-Type
-
-</th><th>
-
-Description
-
-</th></tr></thead>
-<tbody><tr><td>
-
-startX
-
-</td><td>
-
-number
-
-</td><td>
-
-Start position X
-
-</td></tr>
-</tbody></table>
-
-## Returns
-
-[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
-
-Line primitive object
-
-## Example
-
-```javascript
-// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
-const x = 6000 + (Math.floor(Math.random() * 100000));
-const y = 2000 + (Math.floor(Math.random() * 100000));
-
-// 2. 创建一条测试直线，起点 (x, y)
-const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
-
-// 3. 读取修改前的起点 X
-const before = line.getState_StartX();
-
-// 4. 切换异步模式并平移起点 X（右移 300mil）
-const asyncLine = line.toAsync();
-asyncLine.setState_StartX(x + 300);
-await asyncLine.done();
-
-// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
-const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
-const after = refetched.getState_StartX();
-
-console.log('startX:', before, '→', after);
-```
-
-### setstate_starty
-
-# IPCB\_PrimitiveLine.setState\_StartY() method
-
-> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
-
-Set the property state: start position Y
-
-## Signature
-
-```typescript
-function setState_StartY(startY: number): IPCB_PrimitiveLine;
-```
-
-## Parameters
-
-<table><thead><tr><th>
-
-Parameter
-
-</th><th>
-
-Type
-
-</th><th>
-
-Description
-
-</th></tr></thead>
-<tbody><tr><td>
-
-startY
-
-</td><td>
-
-number
-
-</td><td>
-
-Start position Y
-
-</td></tr>
-</tbody></table>
-
-## Returns
-
-[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
-
-Line primitive object
-
-## Example
-
-```javascript
-// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
-const x = 10000 + (Math.floor(Math.random() * 100000));
-const y = 2000 + (Math.floor(Math.random() * 100000));
-
-// 2. 创建一条测试直线，起点 (x, y)
-const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
-
-// 3. 读取修改前的起点 Y
-const before = line.getState_StartY();
-
-// 4. 切换异步模式并平移起点 Y（上移 300mil）
-const asyncLine = line.toAsync();
-asyncLine.setState_StartY(y + 300);
-await asyncLine.done();
-
-// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
-const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
-const after = refetched.getState_StartY();
-
-console.log('startY:', before, '→', after);
-```
-
-### toasync
-
-# IPCB\_PrimitiveLine.toAsync() method
-
-Convert Primitive to Async primitive
-
-## Signature
-
-```typescript
-function toAsync(): IPCB_PrimitiveLine;
-```
-
-## Returns
-
-[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
-
-Line primitive object
-
-## Example
-
-```javascript
-// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
-const x = 52000 + (Math.floor(Math.random() * 100000));
-const y = 2000 + (Math.floor(Math.random() * 100000));
-
-// 2. 创建一条测试直线，切换到同步模式，让模式变化可观察
-const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
-line.toSync();
-
-// 3. 转换为异步图元
-const asyncLine = line.toAsync();
-
-// 4. 异步模式下累计修改并提交
-asyncLine.setState_LineWidth(24);
-await asyncLine.done();
-
-// 5. 从画布重新读取，确认提交生效（保留现场供观察）
-const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
-
-console.log('isAsync after toAsync:', line.isAsync());
-console.log('lineWidth:', 10, '→', refetched.getState_LineWidth());
-```
-
-### tosync
-
-# IPCB\_PrimitiveLine.toSync() method
-
-Convert Primitive to Sync primitive
-
-## Signature
-
-```typescript
-function toSync(): IPCB_PrimitiveLine;
-```
-
-## Returns
-
-[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
-
-Line primitive object
-
-## Example
-
-```javascript
-// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
-const x = 56000 + (Math.floor(Math.random() * 100000));
-const y = 2000 + (Math.floor(Math.random() * 100000));
-
-// 2. 创建一条测试直线
-const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
-
-// 3. 转换为同步图元
-const syncLine = line.toSync();
-
-// 4. 同步模式下修改线宽，立即生效（无需 done()）
-syncLine.setState_LineWidth(40);
-
-// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
-const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
-
-console.log('isSync after toSync:', !syncLine.isAsync());
-console.log('lineWidth:', 10, '→', refetched.getState_LineWidth());
-```
+# IPCB\_PrimitiveLine class
+
+Line primitive
+
+## Signature
+
+```typescript
+class IPCB_PrimitiveLine implements IPCB_Primitive
+```
+**Implements:** [IPCB\_Primitive](../interfaces/IPCB_Primitive.md)
+
+## Remarks
+
+Both lines and arc lines are wires, corresponding to the line traces and arc traces on the canvas
+
+## Methods
+
+<table><thead><tr><th>
+
+Method
+
+</th><th>
+
+Modifiers
+
+</th><th>
+
+Description
+
+</th></tr></thead>
+<tbody><tr><td>
+
+[done()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Apply the changes to the primitives to the canvas
+
+</td></tr>
+<tr><td>
+
+[getAdjacentPrimitives()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Get Adjacent primitive objects
+
+</td></tr>
+<tr><td>
+
+[getEntireTrack(includeVias)](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Get the entire wire
+
+</td></tr>
+<tr><td>
+
+[getEntireTrack(includeVias)](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Get the entire wire
+
+</td></tr>
+<tr><td>
+
+[getState\_EndX()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Get the property state: end position X
+
+</td></tr>
+<tr><td>
+
+[getState\_EndY()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Get the property state: end position Y
+
+</td></tr>
+<tr><td>
+
+[getState\_Layer()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Get the property state: Layer
+
+</td></tr>
+<tr><td>
+
+[getState\_LineWidth()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Get the property state: Line width
+
+</td></tr>
+<tr><td>
+
+[getState\_Net()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Get the property state: net name
+
+</td></tr>
+<tr><td>
+
+[getState\_PrimitiveId()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Get the property state: primitive ID
+
+</td></tr>
+<tr><td>
+
+[getState\_PrimitiveLock()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Get the property state: whether it is locked
+
+</td></tr>
+<tr><td>
+
+[getState\_PrimitiveType()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Get the property state: primitive type
+
+</td></tr>
+<tr><td>
+
+[getState\_StartX()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Get the property state: start position X
+
+</td></tr>
+<tr><td>
+
+[getState\_StartY()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Get the property state: start position Y
+
+</td></tr>
+<tr><td>
+
+[isAsync()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Query whether the primitive is an async primitive
+
+</td></tr>
+<tr><td>
+
+[reset()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Reset the async primitive to the current canvas state
+
+</td></tr>
+<tr><td>
+
+[setState\_EndX(endX)](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Set the property state: end position X
+
+</td></tr>
+<tr><td>
+
+[setState\_EndY(endY)](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Set the property state: end position Y
+
+</td></tr>
+<tr><td>
+
+[setState\_Layer(layer)](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Set the property state: Layer
+
+</td></tr>
+<tr><td>
+
+[setState\_LineWidth(lineWidth)](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Set the property state: Line width
+
+</td></tr>
+<tr><td>
+
+[setState\_Net(net)](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Set the property state: net name
+
+</td></tr>
+<tr><td>
+
+[setState\_PrimitiveLock(primitiveLock)](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Set the property state: whether it is locked
+
+</td></tr>
+<tr><td>
+
+[setState\_StartX(startX)](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Set the property state: start position X
+
+</td></tr>
+<tr><td>
+
+[setState\_StartY(startY)](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+**_(BETA)_** Set the property state: start position Y
+
+</td></tr>
+<tr><td>
+
+[toAsync()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Convert Primitive to Async primitive
+
+</td></tr>
+<tr><td>
+
+[toSync()](./IPCB_PrimitiveLine.md)
+
+</td><td>
+
+</td><td>
+
+Convert Primitive to Sync primitive
+
+</td></tr>
+</tbody></table>
+
+---
+
+## 方法详情
+
+### done
+
+# IPCB\_PrimitiveLine.done() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Apply the changes to the primitives to the canvas
+
+## Signature
+
+```typescript
+function done(): Promise<IPCB_PrimitiveLine>;
+```
+
+## Returns
+
+Promise&lt;[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)<!-- -->&gt;
+
+Line primitive object
+
+## Example
+
+```javascript
+// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
+const x = 42000 + (Math.floor(Math.random() * 100000));
+const y = 2000 + (Math.floor(Math.random() * 100000));
+
+// 2. 创建一条测试直线走线
+const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
+
+// 3. 切换异步模式，连续累计两处修改（线宽 + 换层）
+const asyncLine = line.toAsync();
+asyncLine.setState_LineWidth(24);
+asyncLine.setState_Layer(2);
+
+// 4. 一次性提交到画布
+await asyncLine.done();
+
+// 5. 从画布重新读取，确认两处修改都已生效（保留现场供观察）
+const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
+
+console.log('lineWidth:', 10, '→', refetched.getState_LineWidth());
+console.log('layer:', 1, '→', refetched.getState_Layer());
+```
+
+### getadjacentprimitives
+
+# IPCB\_PrimitiveLine.getAdjacentPrimitives() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Get Adjacent primitive objects
+
+## Signature
+
+```typescript
+function getAdjacentPrimitives(): Promise<
+	Array<IPCB_PrimitiveLine | IPCB_PrimitiveVia | IPCB_PrimitiveArc>
+>;
+```
+
+## Returns
+
+Promise&lt;Array&lt;[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md) \| [IPCB\_PrimitiveVia](./IPCB_PrimitiveVia.md) \| [IPCB\_PrimitiveArc](./IPCB_PrimitiveArc.md)<!-- -->&gt;&gt;
+
+Adjacent line, via, and arc-line primitive objects
+
+## Remarks
+
+It will get the line, via, and arc-line primitive objects directly connected to both ends of the line
+
+## Example
+
+```javascript
+// 1. 创建一条直线走线，终点落在 (7500, 7000)
+const line = await eda.pcb_PrimitiveLine.create('', 1, 7000, 7000, 7500, 7000, 10);
+
+// 2. 创建一段圆弧，起点与直线终点重合，两段构成一整段导线
+const arc = await eda.pcb_PrimitiveArc.create('', 1, 7500, 7000, 7800, 7300, 90, 10, 1, false);
+
+// 3. 获取与直线直接相连的图元，并读出各自的类型
+const adjacent = await line.getAdjacentPrimitives();
+
+// 4. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
+await eda.pcb_PrimitiveArc.delete([arc.getState_PrimitiveId()]);
+
+console.log('adjacent count:', adjacent.length);
+adjacent.forEach((p, i) => {
+	console.log(`adjacent[${i}] type:`, p.getState_PrimitiveType());
+});
+```
+
+### getentiretrack
+
+# IPCB\_PrimitiveLine.getEntireTrack() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Get the entire wire
+
+## Signature
+
+```typescript
+function getEntireTrack(includeVias: false): Promise<Array<IPCB_PrimitiveLine | IPCB_PrimitiveArc>>;
+```
+
+## Parameters
+
+<table><thead><tr><th>
+
+Parameter
+
+</th><th>
+
+Type
+
+</th><th>
+
+Description
+
+</th></tr></thead>
+<tbody><tr><td>
+
+includeVias
+
+</td><td>
+
+false
+
+</td><td>
+
+Whether to include the vias at both ends of the wire
+
+</td></tr>
+</tbody></table>
+
+## Returns
+
+Promise&lt;Array&lt;[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md) \| [IPCB\_PrimitiveArc](./IPCB_PrimitiveArc.md)<!-- -->&gt;&gt;
+
+All lines and arc lines in the entire wire
+
+## Example
+
+```javascript
+// 1. 创建一条直线走线，终点落在 (7500, 7000)
+const line = await eda.pcb_PrimitiveLine.create('', 1, 7000, 7000, 7500, 7000, 10);
+
+// 2. 创建一段圆弧，起点与直线终点重合，两段构成一整段导线
+const arc = await eda.pcb_PrimitiveArc.create('', 1, 7500, 7000, 7800, 7300, 90, 10, 1, false);
+
+// 3. 只取导线内的直线和圆弧
+const trackOnly = await line.getEntireTrack(false);
+
+// 4. 连两端过孔一起取（本例两端没有过孔，数量不变）
+const trackWithVias = await line.getEntireTrack(true);
+
+// 5. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
+await eda.pcb_PrimitiveArc.delete([arc.getState_PrimitiveId()]);
+
+console.log('track(false) count:', trackOnly.length);
+trackOnly.forEach((p, i) => {
+	console.log(`track(false)[${i}] type:`, p.getState_PrimitiveType());
+});
+console.log('track(true) count:', trackWithVias.length);
+```
+
+### getentiretrack_1
+
+# IPCB\_PrimitiveLine.getEntireTrack() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Get the entire wire
+
+## Signature
+
+```typescript
+function getEntireTrack(
+	includeVias: true,
+): Promise<Array<IPCB_PrimitiveLine | IPCB_PrimitiveArc | IPCB_PrimitiveVia>>;
+```
+
+## Parameters
+
+<table><thead><tr><th>
+
+Parameter
+
+</th><th>
+
+Type
+
+</th><th>
+
+Description
+
+</th></tr></thead>
+<tbody><tr><td>
+
+includeVias
+
+</td><td>
+
+true
+
+</td><td>
+
+Whether to include the vias at both ends of the wire
+
+</td></tr>
+</tbody></table>
+
+## Returns
+
+Promise&lt;Array&lt;[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md) \| [IPCB\_PrimitiveArc](./IPCB_PrimitiveArc.md) \| [IPCB\_PrimitiveVia](./IPCB_PrimitiveVia.md)<!-- -->&gt;&gt;
+
+All lines and arc lines in the entire wire, as well as the vias connected at both ends (if any)
+
+### getstate_endx
+
+# IPCB\_PrimitiveLine.getState\_EndX() method
+
+Get the property state: end position X
+
+## Signature
+
+```typescript
+function getState_EndX(): number;
+```
+
+## Returns
+
+number
+
+End position X
+
+## Example
+
+```javascript
+// 1. 创建一条测试直线，终点 (1600, 1000)
+const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
+
+// 2. 读取终点 X
+const endX = line.getState_EndX();
+
+// 3. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
+
+console.log('endX:', endX);
+```
+
+### getstate_endy
+
+# IPCB\_PrimitiveLine.getState\_EndY() method
+
+Get the property state: end position Y
+
+## Signature
+
+```typescript
+function getState_EndY(): number;
+```
+
+## Returns
+
+number
+
+End position Y
+
+## Example
+
+```javascript
+// 1. 创建一条测试直线，终点 (1600, 1000)
+const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
+
+// 2. 读取终点 Y
+const endY = line.getState_EndY();
+
+// 3. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
+
+console.log('endY:', endY);
+```
+
+### getstate_layer
+
+# IPCB\_PrimitiveLine.getState\_Layer() method
+
+Get the property state: Layer
+
+## Signature
+
+```typescript
+function getState_Layer(): TPCB_LayersOfLine;
+```
+
+## Returns
+
+[TPCB\_LayersOfLine](../types/TPCB_LayersOfLine.md)
+
+Layer
+
+## Example
+
+```javascript
+// 1. 创建一条顶层（1）测试直线
+const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
+
+// 2. 读取所在层
+const layer = line.getState_Layer();
+
+// 3. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
+
+console.log('layer:', layer);
+```
+
+### getstate_linewidth
+
+# IPCB\_PrimitiveLine.getState\_LineWidth() method
+
+Get the property state: Line width
+
+## Signature
+
+```typescript
+function getState_LineWidth(): number;
+```
+
+## Returns
+
+number
+
+Line width
+
+## Example
+
+```javascript
+// 1. 创建一条 10mil 线宽的测试直线
+const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
+
+// 2. 读取线宽
+const lineWidth = line.getState_LineWidth();
+
+// 3. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
+
+console.log('lineWidth:', lineWidth);
+```
+
+### getstate_net
+
+# IPCB\_PrimitiveLine.getState\_Net() method
+
+Get the property state: net name
+
+## Signature
+
+```typescript
+function getState_Net(): string;
+```
+
+## Returns
+
+string
+
+Net name
+
+## Example
+
+```javascript
+// 1. 创建一条指定网络的测试直线
+const line = await eda.pcb_PrimitiveLine.create('嘉立创示例_NET', 1, 1000, 1000, 1600, 1000, 10);
+
+// 2. 读取网络名称
+const net = line.getState_Net();
+
+// 3. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
+
+console.log('net:', net);
+```
+
+### getstate_primitiveid
+
+# IPCB\_PrimitiveLine.getState\_PrimitiveId() method
+
+Get the property state: primitive ID
+
+## Signature
+
+```typescript
+function getState_PrimitiveId(): string;
+```
+
+## Returns
+
+string
+
+Primitive ID
+
+## Example
+
+```javascript
+// 1. 创建一条测试直线
+const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
+
+// 2. 读取图元 ID
+const primitiveId = line.getState_PrimitiveId();
+
+// 3. 用该 ID 从画布重新取回直线，验证 ID 有效
+const refetched = await eda.pcb_PrimitiveLine.get(primitiveId);
+
+// 4. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([primitiveId]);
+
+console.log('primitiveId:', primitiveId);
+console.log('refetched type:', refetched.getState_PrimitiveType());
+```
+
+### getstate_primitivelock
+
+# IPCB\_PrimitiveLine.getState\_PrimitiveLock() method
+
+Get the property state: whether it is locked
+
+## Signature
+
+```typescript
+function getState_PrimitiveLock(): boolean;
+```
+
+## Returns
+
+boolean
+
+Whether it is locked
+
+## Example
+
+```javascript
+// 1. 创建一条测试直线（默认不锁定）
+const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
+
+// 2. 读取锁定状态
+const locked = line.getState_PrimitiveLock();
+
+// 3. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
+
+console.log('locked:', locked);
+```
+
+### getstate_primitivetype
+
+# IPCB\_PrimitiveLine.getState\_PrimitiveType() method
+
+Get the property state: primitive type
+
+## Signature
+
+```typescript
+function getState_PrimitiveType(): EPCB_PrimitiveType;
+```
+
+## Returns
+
+[EPCB\_PrimitiveType](../enums/EPCB_PrimitiveType.md)
+
+Primitive type
+
+## Example
+
+```javascript
+// 1. 创建一条测试直线
+const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
+
+// 2. 读取图元类型
+const type = line.getState_PrimitiveType();
+
+// 3. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
+
+console.log('type:', type);
+```
+
+### getstate_startx
+
+# IPCB\_PrimitiveLine.getState\_StartX() method
+
+Get the property state: start position X
+
+## Signature
+
+```typescript
+function getState_StartX(): number;
+```
+
+## Returns
+
+number
+
+Start position X
+
+## Example
+
+```javascript
+// 1. 创建一条测试直线，起点 (1000, 1000)
+const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
+
+// 2. 读取起点 X
+const startX = line.getState_StartX();
+
+// 3. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
+
+console.log('startX:', startX);
+```
+
+### getstate_starty
+
+# IPCB\_PrimitiveLine.getState\_StartY() method
+
+Get the property state: start position Y
+
+## Signature
+
+```typescript
+function getState_StartY(): number;
+```
+
+## Returns
+
+number
+
+Start position Y
+
+## Example
+
+```javascript
+// 1. 创建一条测试直线，起点 (1000, 1000)
+const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
+
+// 2. 读取起点 Y
+const startY = line.getState_StartY();
+
+// 3. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
+
+console.log('startY:', startY);
+```
+
+### isasync
+
+# IPCB\_PrimitiveLine.isAsync() method
+
+Query whether the primitive is an async primitive
+
+## Signature
+
+```typescript
+function isAsync(): boolean;
+```
+
+## Returns
+
+boolean
+
+Whether Is async primitive
+
+## Example
+
+```javascript
+// 1. 创建一条测试直线，读出创建后的默认模式
+const line = await eda.pcb_PrimitiveLine.create('', 1, 1000, 1000, 1600, 1000, 10);
+const asyncOnCreate = line.isAsync();
+
+// 2. 切换到同步模式再查询一次，对比两种模式
+line.toSync();
+const asyncAfterToSync = line.isAsync();
+
+// 3. 清理测试图元（查询类案例不留测试对象）
+await eda.pcb_PrimitiveLine.delete([line.getState_PrimitiveId()]);
+
+console.log('isAsync on create:', asyncOnCreate);
+console.log('isAsync after toSync:', asyncAfterToSync);
+```
+
+### reset
+
+# IPCB\_PrimitiveLine.reset() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Reset the async primitive to the current canvas state
+
+## Signature
+
+```typescript
+function reset(): Promise<IPCB_PrimitiveLine>;
+```
+
+## Returns
+
+Promise&lt;[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)<!-- -->&gt;
+
+Line primitive object
+
+## Example
+
+```javascript
+// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
+const x = 46000 + (Math.floor(Math.random() * 100000));
+const y = 2000 + (Math.floor(Math.random() * 100000));
+
+// 2. 创建一条 10mil 线宽的测试直线
+const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
+
+// 3. 切换异步模式，累计一处未提交的线宽修改（10 → 99）
+const asyncLine = line.toAsync();
+asyncLine.setState_LineWidth(99);
+
+// 4. 重置：丢弃未提交的修改，回到画布当前状态
+await asyncLine.reset();
+
+// 5. 从画布重新读取，线宽仍是 10（保留现场供观察）
+const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
+
+console.log('lineWidth after reset:', refetched.getState_LineWidth());
+```
+
+### setstate_endx
+
+# IPCB\_PrimitiveLine.setState\_EndX() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Set the property state: end position X
+
+## Signature
+
+```typescript
+function setState_EndX(endX: number): IPCB_PrimitiveLine;
+```
+
+## Parameters
+
+<table><thead><tr><th>
+
+Parameter
+
+</th><th>
+
+Type
+
+</th><th>
+
+Description
+
+</th></tr></thead>
+<tbody><tr><td>
+
+endX
+
+</td><td>
+
+number
+
+</td><td>
+
+End position X
+
+</td></tr>
+</tbody></table>
+
+## Returns
+
+[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
+
+Line primitive object
+
+## Example
+
+```javascript
+// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
+const x = 14000 + (Math.floor(Math.random() * 100000));
+const y = 2000 + (Math.floor(Math.random() * 100000));
+
+// 2. 创建一条测试直线，终点 (x + 600, y)
+const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
+
+// 3. 读取修改前的终点 X
+const before = line.getState_EndX();
+
+// 4. 切换异步模式并拉长终点（右移 300mil）
+const asyncLine = line.toAsync();
+asyncLine.setState_EndX(x + 900);
+await asyncLine.done();
+
+// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
+const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
+const after = refetched.getState_EndX();
+
+console.log('endX:', before, '→', after);
+```
+
+### setstate_endy
+
+# IPCB\_PrimitiveLine.setState\_EndY() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Set the property state: end position Y
+
+## Signature
+
+```typescript
+function setState_EndY(endY: number): IPCB_PrimitiveLine;
+```
+
+## Parameters
+
+<table><thead><tr><th>
+
+Parameter
+
+</th><th>
+
+Type
+
+</th><th>
+
+Description
+
+</th></tr></thead>
+<tbody><tr><td>
+
+endY
+
+</td><td>
+
+number
+
+</td><td>
+
+End position Y
+
+</td></tr>
+</tbody></table>
+
+## Returns
+
+[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
+
+Line primitive object
+
+## Example
+
+```javascript
+// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
+const x = 18000 + (Math.floor(Math.random() * 100000));
+const y = 2000 + (Math.floor(Math.random() * 100000));
+
+// 2. 创建一条测试直线，终点 (x + 600, y)
+const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
+
+// 3. 读取修改前的终点 Y
+const before = line.getState_EndY();
+
+// 4. 切换异步模式并抬高终点（上移 300mil）
+const asyncLine = line.toAsync();
+asyncLine.setState_EndY(y + 300);
+await asyncLine.done();
+
+// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
+const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
+const after = refetched.getState_EndY();
+
+console.log('endY:', before, '→', after);
+```
+
+### setstate_layer
+
+# IPCB\_PrimitiveLine.setState\_Layer() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Set the property state: Layer
+
+## Signature
+
+```typescript
+function setState_Layer(layer: TPCB_LayersOfLine): IPCB_PrimitiveLine;
+```
+
+## Parameters
+
+<table><thead><tr><th>
+
+Parameter
+
+</th><th>
+
+Type
+
+</th><th>
+
+Description
+
+</th></tr></thead>
+<tbody><tr><td>
+
+layer
+
+</td><td>
+
+[TPCB\_LayersOfLine](../types/TPCB_LayersOfLine.md)
+
+</td><td>
+
+Layer
+
+</td></tr>
+</tbody></table>
+
+## Returns
+
+[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
+
+Line primitive object
+
+## Example
+
+```javascript
+// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
+const x = 22000 + (Math.floor(Math.random() * 100000));
+const y = 2000 + (Math.floor(Math.random() * 100000));
+
+// 2. 创建一条顶层（1）测试直线
+const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
+
+// 3. 读取修改前的层
+const before = line.getState_Layer();
+
+// 4. 切换异步模式并换层（顶层 1 → 底层 2）
+const asyncLine = line.toAsync();
+asyncLine.setState_Layer(2);
+await asyncLine.done();
+
+// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
+const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
+const after = refetched.getState_Layer();
+
+console.log('layer:', before, '→', after);
+```
+
+### setstate_linewidth
+
+# IPCB\_PrimitiveLine.setState\_LineWidth() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Set the property state: Line width
+
+## Signature
+
+```typescript
+function setState_LineWidth(lineWidth: number): IPCB_PrimitiveLine;
+```
+
+## Parameters
+
+<table><thead><tr><th>
+
+Parameter
+
+</th><th>
+
+Type
+
+</th><th>
+
+Description
+
+</th></tr></thead>
+<tbody><tr><td>
+
+lineWidth
+
+</td><td>
+
+number
+
+</td><td>
+
+Line width
+
+</td></tr>
+</tbody></table>
+
+## Returns
+
+[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
+
+Line primitive object
+
+## Example
+
+```javascript
+// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
+const x = 26000 + (Math.floor(Math.random() * 100000));
+const y = 2000 + (Math.floor(Math.random() * 100000));
+
+// 2. 创建一条 10mil 线宽的测试直线
+const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
+
+// 3. 读取修改前的线宽
+const before = line.getState_LineWidth();
+
+// 4. 切换异步模式并加宽（10 → 24）
+const asyncLine = line.toAsync();
+asyncLine.setState_LineWidth(24);
+await asyncLine.done();
+
+// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
+const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
+const after = refetched.getState_LineWidth();
+
+console.log('lineWidth:', before, '→', after);
+```
+
+### setstate_net
+
+# IPCB\_PrimitiveLine.setState\_Net() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Set the property state: net name
+
+## Signature
+
+```typescript
+function setState_Net(net: string): IPCB_PrimitiveLine;
+```
+
+## Parameters
+
+<table><thead><tr><th>
+
+Parameter
+
+</th><th>
+
+Type
+
+</th><th>
+
+Description
+
+</th></tr></thead>
+<tbody><tr><td>
+
+net
+
+</td><td>
+
+string
+
+</td><td>
+
+Net name
+
+</td></tr>
+</tbody></table>
+
+## Returns
+
+[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
+
+Line primitive object
+
+## Example
+
+```javascript
+// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
+const x = 30000 + (Math.floor(Math.random() * 100000));
+const y = 2000 + (Math.floor(Math.random() * 100000));
+
+// 2. 创建一条无网络的测试直线
+const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
+
+// 3. 读取修改前的网络名称
+const before = line.getState_Net();
+
+// 4. 切换异步模式并指定网络（'' → '嘉立创示例_NET'）
+const asyncLine = line.toAsync();
+asyncLine.setState_Net('嘉立创示例_NET');
+await asyncLine.done();
+
+// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
+const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
+const after = refetched.getState_Net();
+
+console.log('net:', before, '→', after);
+```
+
+### setstate_primitivelock
+
+# IPCB\_PrimitiveLine.setState\_PrimitiveLock() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Set the property state: whether it is locked
+
+## Signature
+
+```typescript
+function setState_PrimitiveLock(primitiveLock: boolean): IPCB_PrimitiveLine;
+```
+
+## Parameters
+
+<table><thead><tr><th>
+
+Parameter
+
+</th><th>
+
+Type
+
+</th><th>
+
+Description
+
+</th></tr></thead>
+<tbody><tr><td>
+
+primitiveLock
+
+</td><td>
+
+boolean
+
+</td><td>
+
+Whether it is locked
+
+</td></tr>
+</tbody></table>
+
+## Returns
+
+[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
+
+Line primitive object
+
+## Example
+
+```javascript
+// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
+const x = 34000 + (Math.floor(Math.random() * 100000));
+const y = 2000 + (Math.floor(Math.random() * 100000));
+
+// 2. 创建一条测试直线（默认不锁定）
+const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
+
+// 3. 读取修改前的锁定状态
+const before = line.getState_PrimitiveLock();
+
+// 4. 切换异步模式并锁定（false → true）
+const asyncLine = line.toAsync();
+asyncLine.setState_PrimitiveLock(true);
+await asyncLine.done();
+
+// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
+const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
+const after = refetched.getState_PrimitiveLock();
+
+console.log('locked:', before, '→', after);
+```
+
+### setstate_startx
+
+# IPCB\_PrimitiveLine.setState\_StartX() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Set the property state: start position X
+
+## Signature
+
+```typescript
+function setState_StartX(startX: number): IPCB_PrimitiveLine;
+```
+
+## Parameters
+
+<table><thead><tr><th>
+
+Parameter
+
+</th><th>
+
+Type
+
+</th><th>
+
+Description
+
+</th></tr></thead>
+<tbody><tr><td>
+
+startX
+
+</td><td>
+
+number
+
+</td><td>
+
+Start position X
+
+</td></tr>
+</tbody></table>
+
+## Returns
+
+[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
+
+Line primitive object
+
+## Example
+
+```javascript
+// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
+const x = 6000 + (Math.floor(Math.random() * 100000));
+const y = 2000 + (Math.floor(Math.random() * 100000));
+
+// 2. 创建一条测试直线，起点 (x, y)
+const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
+
+// 3. 读取修改前的起点 X
+const before = line.getState_StartX();
+
+// 4. 切换异步模式并平移起点 X（右移 300mil）
+const asyncLine = line.toAsync();
+asyncLine.setState_StartX(x + 300);
+await asyncLine.done();
+
+// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
+const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
+const after = refetched.getState_StartX();
+
+console.log('startX:', before, '→', after);
+```
+
+### setstate_starty
+
+# IPCB\_PrimitiveLine.setState\_StartY() method
+
+> This API is provided as a beta preview for developers and may change based on feedback that we receive. Do not use this API in a production environment.
+
+Set the property state: start position Y
+
+## Signature
+
+```typescript
+function setState_StartY(startY: number): IPCB_PrimitiveLine;
+```
+
+## Parameters
+
+<table><thead><tr><th>
+
+Parameter
+
+</th><th>
+
+Type
+
+</th><th>
+
+Description
+
+</th></tr></thead>
+<tbody><tr><td>
+
+startY
+
+</td><td>
+
+number
+
+</td><td>
+
+Start position Y
+
+</td></tr>
+</tbody></table>
+
+## Returns
+
+[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
+
+Line primitive object
+
+## Example
+
+```javascript
+// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
+const x = 10000 + (Math.floor(Math.random() * 100000));
+const y = 2000 + (Math.floor(Math.random() * 100000));
+
+// 2. 创建一条测试直线，起点 (x, y)
+const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
+
+// 3. 读取修改前的起点 Y
+const before = line.getState_StartY();
+
+// 4. 切换异步模式并平移起点 Y（上移 300mil）
+const asyncLine = line.toAsync();
+asyncLine.setState_StartY(y + 300);
+await asyncLine.done();
+
+// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
+const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
+const after = refetched.getState_StartY();
+
+console.log('startY:', before, '→', after);
+```
+
+### toasync
+
+# IPCB\_PrimitiveLine.toAsync() method
+
+Convert Primitive to Async primitive
+
+## Signature
+
+```typescript
+function toAsync(): IPCB_PrimitiveLine;
+```
+
+## Returns
+
+[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
+
+Line primitive object
+
+## Example
+
+```javascript
+// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
+const x = 52000 + (Math.floor(Math.random() * 100000));
+const y = 2000 + (Math.floor(Math.random() * 100000));
+
+// 2. 创建一条测试直线，切换到同步模式，让模式变化可观察
+const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
+line.toSync();
+
+// 3. 转换为异步图元
+const asyncLine = line.toAsync();
+
+// 4. 异步模式下累计修改并提交
+asyncLine.setState_LineWidth(24);
+await asyncLine.done();
+
+// 5. 从画布重新读取，确认提交生效（保留现场供观察）
+const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
+
+console.log('isAsync after toAsync:', line.isAsync());
+console.log('lineWidth:', 10, '→', refetched.getState_LineWidth());
+```
+
+### tosync
+
+# IPCB\_PrimitiveLine.toSync() method
+
+Convert Primitive to Sync primitive
+
+## Signature
+
+```typescript
+function toSync(): IPCB_PrimitiveLine;
+```
+
+## Returns
+
+[IPCB\_PrimitiveLine](./IPCB_PrimitiveLine.md)
+
+Line primitive object
+
+## Example
+
+```javascript
+// 1. 生成本次运行专用的坐标，避免与之前保留的测试走线重合
+const x = 56000 + (Math.floor(Math.random() * 100000));
+const y = 2000 + (Math.floor(Math.random() * 100000));
+
+// 2. 创建一条测试直线
+const line = await eda.pcb_PrimitiveLine.create('', 1, x, y, x + 600, y, 10);
+
+// 3. 转换为同步图元
+const syncLine = line.toSync();
+
+// 4. 同步模式下修改线宽，立即生效（无需 done()）
+syncLine.setState_LineWidth(40);
+
+// 5. 从画布重新读取，确认修改已生效（保留现场供观察）
+const refetched = await eda.pcb_PrimitiveLine.get(line.getState_PrimitiveId());
+
+console.log('isSync after toSync:', !syncLine.isAsync());
+console.log('lineWidth:', 10, '→', refetched.getState_LineWidth());
+```