@windypro-rourou/dsh-eda 0.1.0 → 0.1.2

package/skill/references/types/TPCB_LayersOfRegion.md

@@ -0,0 +1,12 @@
+# TPCB\_LayersOfRegion type
+
+Layers of the region
+
+## Signature
+
+```typescript
+type TPCB_LayersOfRegion = TPCB_LayersOfCopper | EPCB_LayerId.MULTI;
+```
+## References
+
+[TPCB\_LayersOfCopper](./TPCB_LayersOfCopper.md)<!-- -->, [EPCB\_LayerId.MULTI](../enums/EPCB_LayerId.md)

package/skill/references/types/TPCB_NumberOfCopperLayers.md

@@ -0,0 +1,10 @@
+# TPCB\_NumberOfCopperLayers type
+
+Number of copper layers
+
+## Signature
+
+```typescript
+type TPCB_NumberOfCopperLayers
+	= 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 26 | 28 | 30 | 32;
+```

package/skill/references/types/TPCB_PolygonSourceArray.md

@@ -0,0 +1,83 @@
+# TPCB\_PolygonSourceArray type
+
+Single polygon source array
+
+## Signature
+
+```typescript
+type TPCB_PolygonSourceArray = Array<'L' | 'ARC' | 'CARC' | 'C' | 'R' | 'CIRCLE' | number>;
+```
+
+## Remarks
+
+A single polygon is a region described by an unbroken line whose start and end coincide. If the start and end do not coincide, they will be automatically closed.
+
+Example of the data format of a single polygon:
+
+`[300, 200, 'L', 400, 200, 'ARC', 400, 220, 15, 'C', 200, 500, 400, 300, 100, 100]`
+
+`['R', 100, 200, 300, 300, 0, 0]`
+
+`['CIRCLE', 100, 200, 5]`
+
+The data of a single polygon is composed of the following modes:
+
+1. L line mode
+
+`x1 y1 L x2 y3 x3 y3 ...`
+
+- `{number}` `x` - X coordinate of the line point
+
+- `{number}` `y` - Y coordinate of the line point
+
+② ARC/CARC arc mode
+
+`ARC` is two-point arc interaction, and `CARC` is center arc interaction
+
+`startX startY ARC arcAngle endX endY`
+
+`startX startY CARC arcAngle endX endY`
+
+- `{number}` `startX` - Start X
+
+- `{number}` `startY` - Start Y
+
+- `{number}` `arcAngle` - Arc angle (negative values rotate clockwise; in degrees)
+
+- `{number}` `endX` - End X
+
+- `{number}` `endY` - End Y
+
+3. C cubic Bezier mode
+
+`x1 y1 C x2 y2 x3 y3 x4 y4 ...`
+
+- `{number}` `x` - Control point X
+
+- `{number}` `y` - Control point Y
+
+④ R rectangle mode
+
+`R x y width height rot round`
+
+- `{number}` `x` - top-left point X
+
+- `{number}` `y` - top-left point Y
+
+- `{number}` `width` - width
+
+- `{number}` `height` - height
+
+- `{number}` `rotation` - rotation angle
+
+- `{number}` `round` - corner radius
+
+5. CIRCLE mode
+
+`CIRCLE cx cy radius`
+
+- `{number}` `cx` - center point X
+
+- `{number}` `xy` - center point Y
+
+- `{number}` `radius` - radius

package/skill/references/types/TPCB_PrimitiveDimensionCoordinateSet.md

@@ -0,0 +1,67 @@
+# TPCB\_PrimitiveDimensionCoordinateSet type
+
+Dimension coordinate set
+
+## Signature
+
+```typescript
+type TPCB_PrimitiveDimensionCoordinateSet
+	= | [number, number, number, number, number, number]
+		| [number, number, number, number, number, number, number, number];
+```
+
+## Remarks
+
+The dimension coordinate set has the following three [dimension types](../enums/EPCB_PrimitiveDimensionType.md)<!-- -->:
+
+1. Radius dimension
+
+`[x1, y1, x2, y2, x3, y3]`
+
+- `{number}` `x1` - X of the endpoint on the circle/arc
+
+- `{number}` `y1` - Y of the endpoint on the circle/arc
+
+- `{number}` `x2` - X of the endpoint at the tail of the dimension line
+
+- `{number}` `y2` - Y of the endpoint at the tail of the dimension line
+
+- `{number}` `x3` - X of the bottom-left endpoint of the dimension text
+
+- `{number}` `y3` - Y of the bottom-left endpoint of the dimension text
+
+2. Length dimension
+
+`[x1, y1, x2, y2, x3, y3, x4, y4]`
+
+- `{number}` `x1` - X of the first measurement endpoint
+
+- `{number}` `y1` - Y of the first measurement endpoint
+
+- `{number}` `x2` - X of the first dimension arrow endpoint
+
+- `{number}` `y2` - Y of the first dimension arrow endpoint
+
+- `{number}` `x3` - X of the second dimension arrow endpoint
+
+- `{number}` `y3` - Y of the second dimension arrow endpoint
+
+- `{number}` `x4` - X of the second measurement endpoint
+
+- `{number}` `y4` - Y of the second measurement endpoint
+
+3. Angle dimension
+
+`[x1, y1, x2, y2, x3, y3]`
+
+- `{number}` `x1` - X of the first side endpoint
+
+- `{number}` `y1` - Y of the first side endpoint
+
+- `{number}` `x2` - X of the angle center
+
+- `{number}` `y2` - Y of the angle center
+
+- `{number}` `x3` - X of the second side endpoint
+
+- `{number}` `y3` - Y of the second side endpoint

package/skill/references/types/TPCB_PrimitivePadHole.md

@@ -0,0 +1,31 @@
+# TPCB\_PrimitivePadHole type
+
+Pad drilling
+
+## Signature
+
+```typescript
+type TPCB_PrimitivePadHole
+	= [EPCB_PrimitivePadHoleType.ROUND, number] | [EPCB_PrimitivePadHoleType.SLOT, number, number];
+```
+## References
+
+[EPCB\_PrimitivePadHoleType.ROUND](../enums/EPCB_PrimitivePadHoleType.md)<!-- -->, [EPCB\_PrimitivePadHoleType.SLOT](../enums/EPCB_PrimitivePadHoleType.md)
+
+## Remarks
+
+Pad drilling currently has the following two [types](../enums/EPCB_PrimitivePadHoleType.md)<!-- -->:
+
+1. Circle
+
+`[EPCB_PrimitivePadHoleType.ROUND, diameter]`
+
+- `{number}` `diameter` - diameter
+
+2. Slot
+
+`[EPCB_PrimitivePadHoleType.SLOT, diameter, length]`
+
+- `{number}` `length` - Length. The length cannot be smaller than the diameter; if it is, the length value follows the diameter
+
+- `{number}` `diameter` - diameter

package/skill/references/types/TPCB_PrimitivePadShape.md

@@ -0,0 +1,62 @@
+# TPCB\_PrimitivePadShape type
+
+Pad shape
+
+## Signature
+
+```typescript
+type TPCB_PrimitivePadShape
+	= | [
+		(
+			| EPCB_PrimitivePadShapeType.ELLIPSE
+			| EPCB_PrimitivePadShapeType.OBLONG
+			| EPCB_PrimitivePadShapeType.REGULAR_POLYGON
+		),
+		number,
+		number,
+	]
+	| [EPCB_PrimitivePadShapeType.RECTANGLE, number, number, number]
+	| [
+		EPCB_PrimitivePadShapeType.POLYLINE_COMPLEX_POLYGON,
+			TPCB_PolygonSourceArray | Array<TPCB_PolygonSourceArray>,
+	];
+```
+## References
+
+[EPCB\_PrimitivePadShapeType.ELLIPSE](../enums/EPCB_PrimitivePadShapeType.md)<!-- -->, [EPCB\_PrimitivePadShapeType.OBLONG](../enums/EPCB_PrimitivePadShapeType.md)<!-- -->, [EPCB\_PrimitivePadShapeType.REGULAR\_POLYGON](../enums/EPCB_PrimitivePadShapeType.md)<!-- -->, [EPCB\_PrimitivePadShapeType.RECTANGLE](../enums/EPCB_PrimitivePadShapeType.md)<!-- -->, [EPCB\_PrimitivePadShapeType.POLYLINE\_COMPLEX\_POLYGON](../enums/EPCB_PrimitivePadShapeType.md)<!-- -->, [TPCB\_PolygonSourceArray](./TPCB_PolygonSourceArray.md)
+
+## Remarks
+
+A pad currently has the following four [shape types](../enums/EPCB_PrimitivePadShapeType.md)<!-- -->:
+
+1. Circle
+
+`[EPCB_PrimitivePadShapeType.ELLIPSE, width, height]`
+
+- `{number}` `width` - width
+
+- `{number}` `height` - height
+
+② rectangle
+
+`[EPCB_PrimitivePadShapeType.RECTANGLE, width, height, round]`
+
+- `{number}` `width` - width
+
+- `{number}` `height` - height
+
+- `{number}` `round` - corner radius
+
+3. Regular polygon
+
+`[EPCB_PrimitivePadShapeType.REGULAR_POLYGON, diameter, numberOfSides]`
+
+- `{number}` `diameter` - diameter
+
+- `{number}` `numberOfSides` - Number of sides (<!-- -->&gt; 2)
+
+4. Polyline complex polygon
+
+`[EPCB_PrimitivePadShapeType.POLYLINE_COMPLEX_POLYGON, complexPolygon]`
+
+- `{TPCB_PolygonSourceArray | Array<TPCB_PolygonSourceArray>}` `complexPolygon` - complex polygon source array, you can use [IPCB\_ComplexPolygon.getSource()](../classes/IPCB_ComplexPolygon.md) get

package/skill/references/types/TPCB_PrimitiveSpecialPadShape.md

@@ -0,0 +1,20 @@
+# TPCB\_PrimitiveSpecialPadShape type
+
+Special pad shape
+
+## Signature
+
+```typescript
+type TPCB_PrimitiveSpecialPadShape = Array<[number, number, TPCB_PrimitivePadShape]>;
+```
+## References
+
+[TPCB\_PrimitivePadShape](./TPCB_PrimitivePadShape.md)
+
+## Remarks
+
+`Array<[startLayer, endLayer, TPCB_PrimitivePadShape]>`
+
+- `{number}` `startLayer` - Start layer
+
+- `{number}` `endLayer` - End layer

package/skill/references/types/TSYS_MathPolygonGroup.md

@@ -0,0 +1,16 @@
+# TSYS\_MathPolygonGroup type
+
+Polygon group
+
+## Signature
+
+```typescript
+type TSYS_MathPolygonGroup = Array<ISYS_MathPolygonWithHoles>;
+```
+## References
+
+[ISYS\_MathPolygonWithHoles](../interfaces/ISYS_MathPolygonWithHoles.md)
+
+## Remarks
+
+The return type of Boolean operations, composed of multiple polygons with holes, preserving the association between outer rings and holes

package/skill/references/types/TSYS_MathPolygonInput.md

@@ -0,0 +1,21 @@
+# TSYS\_MathPolygonInput type
+
+Polygon input type
+
+## Signature
+
+```typescript
+type TSYS_MathPolygonInput
+	= | Array<ISYS_MathPoint>
+		| TPCB_PolygonSourceArray
+		| IPCB_Polygon
+		| IPCB_ComplexPolygon
+		| TSYS_MathPolygonGroup;
+```
+## References
+
+[ISYS\_MathPoint](../interfaces/ISYS_MathPoint.md)<!-- -->, [TPCB\_PolygonSourceArray](./TPCB_PolygonSourceArray.md)<!-- -->, [IPCB\_Polygon](../classes/IPCB_Polygon.md)<!-- -->, [IPCB\_ComplexPolygon](../classes/IPCB_ComplexPolygon.md)<!-- -->, [TSYS\_MathPolygonGroup](./TSYS_MathPolygonGroup.md)
+
+## Remarks
+
+The following input formats are supported: - Discrete point array: `[{x, y}, {x, y}, ...]` - Single polygon source array: [TPCB\_PolygonSourceArray](./TPCB_PolygonSourceArray.md) - Single polygon object: [IPCB\_Polygon](../classes/IPCB_Polygon.md) - Complex polygon object: [IPCB\_ComplexPolygon](../classes/IPCB_ComplexPolygon.md) - Polygon group: [TSYS\_MathPolygonGroup](./TSYS_MathPolygonGroup.md)

package/skill/references/types/TSYS_PcbComparisonErrorCode.md

@@ -0,0 +1,10 @@
+# TSYS\_PcbComparisonErrorCode type
+
+PCB comparison failure error code
+
+## Signature
+
+```typescript
+type TSYS_PcbComparisonErrorCode
+	= 'INVALID_PARAM' | 'SAME_PCB' | 'PCB_NOT_FOUND' | 'COMPARISON_FAILED';
+```

package/skill/references/types/TSYS_ShortcutKeys.md

@@ -0,0 +1,97 @@
+# TSYS\_ShortcutKeys type
+
+Shortcut key
+
+## Signature
+
+```typescript
+type TSYS_ShortcutKeys = Array<
+	| 'SHIFT'
+	| 'LEFT_SHIFT'
+	| 'RIGHT_SHIFT'
+	| 'FN'
+	| 'ALT'
+	| 'LEFT_ALT'
+	| 'RIGHT_ALT'
+	| 'CONTROL'
+	| 'LEFT_CONTROL'
+	| 'RIGHT_CONTROL'
+	| 'COMMAND'
+	| 'WIN'
+	| 'OPTION'
+	| 'SUPER'
+	| 'TAB'
+	| 'SPACE'
+	| 'UP'
+	| 'DOWN'
+	| 'LEFT'
+	| 'RIGHT'
+	| 'F1'
+	| 'F2'
+	| 'F3'
+	| 'F4'
+	| 'F5'
+	| 'F6'
+	| 'F7'
+	| 'F8'
+	| 'F9'
+	| 'F10'
+	| 'F11'
+	| 'F12'
+	| 'F13'
+	| 'F14'
+	| 'F15'
+	| 'F16'
+	| 'F17'
+	| 'F18'
+	| 'F19'
+	| 'F20'
+	| '`'
+	| '1'
+	| '2'
+	| '3'
+	| '4'
+	| '5'
+	| '6'
+	| '7'
+	| '8'
+	| '9'
+	| '0'
+	| '-'
+	| '='
+	| 'Q'
+	| 'W'
+	| 'E'
+	| 'R'
+	| 'T'
+	| 'Y'
+	| 'U'
+	| 'I'
+	| 'O'
+	| 'P'
+	| '['
+	| ']'
+	| 'A'
+	| 'S'
+	| 'D'
+	| 'F'
+	| 'G'
+	| 'H'
+	| 'J'
+	| 'K'
+	| 'L'
+	| ';'
+	| '\''
+	| '\\'
+	| 'Z'
+	| 'X'
+	| 'C'
+	| 'V'
+	| 'B'
+	| 'N'
+	| 'M'
+	| ','
+	| '.'
+	| '/'
+>;
+```

package/skill/user-guide/using-extension.md

@@ -0,0 +1,47 @@
+# Getting and Using Extensions
+
+## Getting Extensions
+
+EasyEDA Pro now provides the official [Extensions Marketplace](https://jlcext.com), where you can conveniently obtain a wide range of EasyEDA Pro extensions provided by both official and third-party developers.
+
+![](/storage/images/cn/api/guide/how-to-install/how-to-install_20250427_164224.jpg)
+
+## Installing Extensions
+
+### V3 Installation
+
+1. Open the [EasyEDA Pro Editor](https://pro.easyeda.com/editor).
+
+2. In the top menu, click **Advanced** -\> **Extension Manager**:
+
+![图 0](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150319.png)
+
+3. While online, you can search for extensions and install them directly. If you already have an extension file, you can also click **Import** to import it:
+
+![图 1](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150359.png)
+
+4. Switch to the **Installed** list and click an installed extension to configure its enabled state and permissions. If **Show in top menu** is not checked, the extension entry will appear under the **Advanced** menu by default:
+
+![图 2](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150451.png)
+
+### V2 Installation
+
+1. Open the [EasyEDA Pro Editor](https://pro.easyeda.com/editor).
+
+2. In the top menu bar, click **Settings** -\> **Extensions** -\> **Extension Manager...** in sequence:
+
+  ![图 3](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150634.png)
+
+3. In the pop-up window, click **Import Extension**, then select the downloaded `.eext` file to complete the import.
+
+  ![图 4](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150706.png)
+
+4. Extension settings
+
+- Installed extensions can be enabled or disabled. The registered menu of an enabled extension will be displayed in the top menu bar:
+
+  ![图 5](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150731.png)
+
+- Some extensions involve external interactions, such as network access. You need to enable the extension's **External Interactions** permission to ensure proper operation:
+
+  ![图 6](/storage/images/en/api/user-guide/using-extension/using-extension_20260603_150746.png)