@willieee802/zigbee-herdsman 0.19.21 → 0.34.3

package/dist/adapter/ember/zdo.d.ts

@@ -0,0 +1,921 @@
+import { EmberEUI64, EmberExtendedPanId, EmberNodeId } from "./types";
+/** The endpoint where the ZigBee Device Object (ZDO) resides. */
+export declare const ZDO_ENDPOINT = 0;
+/** The profile ID used by the ZigBee Device Object (ZDO). */
+export declare const ZDO_PROFILE_ID = 0;
+/** ZDO messages start with a sequence number. */
+export declare const ZDO_MESSAGE_OVERHEAD = 1;
+/**
+ * ZDO response status.
+ *
+ * Most responses to ZDO commands contain a status byte.
+ * The meaning of this byte is defined by the ZigBee Device Profile.
+ * uint8_t
+ */
+export declare enum EmberZdoStatus {
+    ZDP_SUCCESS = 0,
+    ZDP_INVALID_REQUEST_TYPE = 128,
+    ZDP_DEVICE_NOT_FOUND = 129,
+    ZDP_INVALID_ENDPOINT = 130,
+    ZDP_NOT_ACTIVE = 131,
+    ZDP_NOT_SUPPORTED = 132,
+    ZDP_TIMEOUT = 133,
+    ZDP_NO_MATCH = 134,
+    ZDP_NO_ENTRY = 136,
+    ZDP_NO_DESCRIPTOR = 137,
+    ZDP_INSUFFICIENT_SPACE = 138,
+    ZDP_NOT_PERMITTED = 139,
+    ZDP_TABLE_FULL = 140,
+    ZDP_NOT_AUTHORIZED = 141,
+    ZDP_DEVICE_BINDING_TABLE_FULL = 142,
+    ZDP_INVALID_INDEX = 143,
+    ZDP_FRAME_TOO_LARGE = 144,
+    ZDP_BAD_KEY_NEGOTIATION_METHOD = 145,
+    ZDP_TEMPORARY_FAILURE = 146,
+    APS_SECURITY_FAIL = 173,
+    NWK_ALREADY_PRESENT = 197,
+    NWK_TABLE_FULL = 199,
+    NWK_UNKNOWN_DEVICE = 200,
+    NWK_MISSING_TLV = 214,
+    NWK_INVALID_TLV = 215
+}
+export type MACCapabilityFlags = {
+    /**
+     * The alternate PAN coordinator sub-field is one bit in length and shall be set to 1 if this node is capable of becoming a PAN coordinator.
+     * Otherwise, the alternative PAN coordinator sub-field shall be set to 0.
+     */
+    alternatePANCoordinator: number;
+    /**
+     * The device type sub-field is one bit in length and shall be set to 1 if this node is a full function device (FFD).
+     * Otherwise, the device type sub-field shall be set to 0, indicating a reduced function device (RFD).
+     */
+    deviceType: number;
+    /**
+     * The power source sub-field is one bit in length and shall be set to 1 if the current power source is mains power.
+     * Otherwise, the power source sub-field shall be set to 0.
+     * This information is derived from the node current power source field of the node power descriptor.
+     */
+    powerSource: number;
+    /**
+     * The receiver on when idle sub-field is one bit in length and shall be set to 1 if the device does not disable its receiver to
+     * conserve power during idle periods.
+     * Otherwise, the receiver on when idle sub-field shall be set to 0 (see also section 2.3.2.4.)
+     */
+    rxOnWhenIdle: number;
+    /** reserved */
+    reserved1: number;
+    /** reserved */
+    reserved2: number;
+    /**
+     * The security capability sub-field is one bit in length and shall be set to 1 if the device is capable of sending and receiving
+     * frames secured using the security suite specified in [B1].
+     * Otherwise, the security capability sub-field shall be set to 0.
+     */
+    securityCapability: number;
+    /** The allocate address sub-field is one bit in length and shall be set to 0 or 1. */
+    allocateAddress: number;
+};
+export type ZDOLQITableEntry = {
+    /**
+     * The 64-bit extended PAN identifier of the neighboring device.
+     *
+     * 64-bit
+     */
+    extendedPanId: EmberExtendedPanId;
+    /**
+     * 64-bit IEEE address that is unique to every device.
+     * If this value is unknown at the time of the request, this field shall be set to 0xffffffffffffffff.
+     *
+     * 64-bit
+     */
+    eui64: EmberEUI64;
+    /** The 16-bit network address of the neighboring device. 16-bit */
+    nodeId: EmberNodeId;
+    /**
+     * The type of the neighbor device:
+     * 0x00 = ZigBee coordinator
+     * 0x01 = ZigBee router
+     * 0x02 = ZigBee end device
+     * 0x03 = Unknown
+     *
+     * 2-bit
+     */
+    deviceType: number;
+    /**
+     * Indicates if neighbor's receiver is enabled during idle portions of the CAP:
+     * 0x00 = Receiver is off
+     * 0x01 = Receiver is on
+     * 0x02 = unknown
+     *
+     * 2-bit
+     */
+    rxOnWhenIdle: number;
+    /**
+     * The relationship between the neighbor and the current device:
+     * 0x00 = neighbor is the parent
+     * 0x01 = neighbor is a child
+     * 0x02 = neighbor is a sibling
+     * 0x03 = None of the above
+     * 0x04 = previous child
+     *
+     * 3-bit
+     */
+    relationship: number;
+    /** This reserved bit shall be set to 0. 1-bit */
+    reserved1: number;
+    /**
+     * An indication of whether the neighbor device is accepting join requests:
+     * 0x00 = neighbor is not accepting join requests
+     * 0x01 = neighbor is accepting join requests
+     * 0x02 = unknown
+     *
+     * 2-bit
+     */
+    permitJoining: number;
+    /** Each of these reserved bits shall be set to 0. 6-bit */
+    reserved2: number;
+    /**
+     * The tree depth of the neighbor device.
+     * A value of 0x00 indicates that the device is the ZigBee coordinator for the network
+     *
+     * 8-bit
+     */
+    depth: number;
+    /**
+     * The estimated link quality for RF transmissions from this device.
+     * See [B1] for discussion of how this is calculated.
+     *
+     * 8-bit
+     */
+    lqi: number;
+};
+export type ZDORoutingTableEntry = {
+    /** 16-bit network address of this route */
+    destinationAddress: EmberNodeId;
+    /**
+     * Status of the route
+     * 0x0=ACTIVE.
+     * 0x1=DISCOVERY_UNDERWAY.
+     * 0x2=DISCOVERY_FAILED.
+     * 0x3=INACTIVE.
+     * 0x4=VALIDATION_UNDERWAY
+     * 0x5-0x7=RESERVED
+     *
+     * 3-bit
+     */
+    status: number;
+    /**
+     * A flag indicating whether the device is a memory constrained concentrator
+     *
+     * 1-bit
+     */
+    memoryConstrained: number;
+    /**
+     * A flag indicating that the destination is a concentrator that issued a many-to-one request
+     *
+     * 1-bit
+     */
+    manyToOne: number;
+    /**
+     * A flag indicating that a route record command frame should be sent to the destination prior to the next data packet.
+     *
+     * 1-bit
+     */
+    routeRecordRequired: number;
+    /** 2-bit */
+    reserved: number;
+    /** 16-bit network address of the next hop on the way to the destination. */
+    nextHopAddress: EmberNodeId;
+};
+export type ZDOBindingTableEntry = {
+    /** The source IEEE address for the binding entry. */
+    sourceEui64: EmberEUI64;
+    /** The source endpoint for the binding entry. uint8_t */
+    sourceEndpoint: number;
+    /** The identifier of the cluster on the source device that is bound to the destination device. uint16_t */
+    clusterId: number;
+    /**
+     * The addressing mode for the destination address. This field can take one of the non-reserved values from the following list:
+     *   - 0x00 = reserved
+     *   - 0x01 = 16-bit group address for DstAddr and DstEndpoint not present
+     *   - 0x02 = reserved
+     *   - 0x03 = 64-bit extended address for DstAddr and DstEndp present
+     *   - 0x04 – 0xff = reserved
+     *
+     * uint8_t
+     */
+    destAddrMode: number;
+    /** The destination address for the binding entry. uint16_t or uint8_t[EUI64_SIZE] */
+    dest: EmberNodeId | EmberEUI64;
+    /**
+     * This field shall be present only if the DstAddrMode field has a value of 0x03 and, if present,
+     * shall be the destination endpoint for the binding entry.
+     * uint8_t or not present
+     */
+    destEndpoint?: number;
+};
+/** @see IEEE_ADDRESS_RESPONSE */
+export type IEEEAddressResponsePayload = {
+    eui64: EmberEUI64;
+    nodeId: EmberNodeId;
+    assocDevList: number[];
+};
+/** @see NETWORK_ADDRESS_RESPONSE */
+export type NetworkAddressResponsePayload = {
+    eui64: EmberEUI64;
+    nodeId: EmberNodeId;
+    assocDevList: number[];
+};
+/** @see MATCH_DESCRIPTORS_RESPONSE */
+export type MatchDescriptorsResponsePayload = {
+    nodeId: EmberNodeId;
+    endpointList: number[];
+};
+/** @see SIMPLE_DESCRIPTOR_RESPONSE */
+export type SimpleDescriptorResponsePayload = {
+    nodeId: EmberNodeId;
+    /** uint8_t  */
+    /** const uint16_t*  */
+    inClusterList: number[];
+    /** uint8_t  */
+    /** const uint16_t*  */
+    outClusterList: number[];
+    /** uint18_t  */
+    profileId: number;
+    /** uint16_t  */
+    deviceId: number;
+    /** uint8_t  */
+    endpoint: number;
+};
+/** @see NODE_DESCRIPTOR_RESPONSE */
+export type NodeDescriptorResponsePayload = {
+    nodeId: EmberNodeId;
+    logicalType: number;
+    macCapFlags: MACCapabilityFlags;
+    manufacturerCode: number;
+    stackRevision: number;
+};
+/** @see POWER_DESCRIPTOR_RESPONSE */
+export type PowerDescriptorResponsePayload = {
+    nodeId: EmberNodeId;
+    currentPowerMode: number;
+    availPowerSources: number;
+    currentPowerSource: number;
+    currentPowerSourceLevel: number;
+};
+/** @see ACTIVE_ENDPOINTS_RESPONSE */
+export type ActiveEndpointsResponsePayload = {
+    nodeId: EmberNodeId;
+    endpointList: number[];
+};
+/** @see LQI_TABLE_RESPONSE */
+export type LQITableResponsePayload = {
+    neighborTableEntries: number;
+    entryList: ZDOLQITableEntry[];
+};
+/** @see ROUTING_TABLE_RESPONSE */
+export type RoutingTableResponsePayload = {
+    routingTableEntries: number;
+    entryList: ZDORoutingTableEntry[];
+};
+/** @see BINDING_TABLE_RESPONSE */
+export type BindingTableResponsePayload = {
+    bindingTableEntries: number;
+    entryList: ZDOBindingTableEntry[];
+};
+/** @see END_DEVICE_ANNOUNCE */
+export type EndDeviceAnnouncePayload = {
+    nodeId: EmberNodeId;
+    eui64: EmberEUI64;
+    capabilities: MACCapabilityFlags;
+};
+/**
+ * Defines for ZigBee device profile cluster IDs follow. These
+ * include descriptions of the formats of the messages.
+ *
+ * Note that each message starts with a 1-byte transaction sequence
+ * number. This sequence number is used to match a response command frame
+ * to the request frame that it is replying to. The application shall
+ * maintain a 1-byte counter that is copied into this field and incremented
+ * by one for each command sent. When a value of 0xff is reached, the next
+ * command shall re-start the counter with a value of 0x00.
+ */
+/**
+ * Network request: [transaction sequence number: 1]
+ *                  [EUI64:8]   [type:1] [start index:1]
+ */
+export declare const NETWORK_ADDRESS_REQUEST = 0;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status:1] [EUI64:8] [node ID:2]
+ *           [ID count:1] [start index:1] [child ID:2]*
+ */
+export declare const NETWORK_ADDRESS_RESPONSE = 32768;
+/**
+ * IEEE request:    [transaction sequence number: 1]
+ *                  [node ID:2] [type:1] [start index:1]
+ *                  [type] = 0x00 single address response, ignore the start index
+ *                  = 0x01 extended response -] sends kid's IDs as well
+ */
+export declare const IEEE_ADDRESS_REQUEST = 1;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status:1] [EUI64:8] [node ID:2]
+ *           [ID count:1] [start index:1] [child ID:2]*
+ */
+export declare const IEEE_ADDRESS_RESPONSE = 32769;
+/**
+ * Request:  [transaction sequence number: 1] [node ID:2] [tlvs: varies]
+ */
+export declare const NODE_DESCRIPTOR_REQUEST = 2;
+/**
+ * Response: [transaction sequence number: 1] [status:1] [node ID:2]
+ *           [node descriptor: 13] [tlvs: varies]
+ *
+ * Node Descriptor field is divided into subfields of bitmasks as follows:
+ *     (Note: All lengths below are given in bits rather than bytes.)
+ *           Logical Type:                     3
+ *           Complex Descriptor Available:     1
+ *           User Descriptor Available:        1
+ *           (reserved/unused):                3
+ *           APS Flags:                        3
+ *           Frequency Band:                   5
+ *           MAC capability flags:             8
+ *           Manufacturer Code:               16
+ *           Maximum buffer size:              8
+ *           Maximum incoming transfer size:  16
+ *           Server mask:                     16
+ *           Maximum outgoing transfer size:  16
+ *           Descriptor Capability Flags:      8
+ *    See ZigBee document 053474, Section 2.3.2.3 for more details.
+ */
+export declare const NODE_DESCRIPTOR_RESPONSE = 32770;
+/**
+ *
+ * Request:  [transaction sequence number: 1] [node ID:2]
+ */
+export declare const POWER_DESCRIPTOR_REQUEST = 3;
+/**
+ * Response: [transaction sequence number: 1] [status:1] [node ID:2]
+ *           [current power mode, available power sources:1]
+ *           [current power source, current power source level:1]
+ *     See ZigBee document 053474, Section 2.3.2.4 for more details.
+ */
+export declare const POWER_DESCRIPTOR_RESPONSE = 32771;
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [node ID:2] [endpoint:1]
+ */
+export declare const SIMPLE_DESCRIPTOR_REQUEST = 4;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status:1] [node ID:2] [length:1] [endpoint:1]
+ *           [app profile ID:2] [app device ID:2]
+ *           [app device version, app flags:1]
+ *           [input cluster count:1] [input cluster:2]*
+ *           [output cluster count:1] [output cluster:2]*
+ */
+export declare const SIMPLE_DESCRIPTOR_RESPONSE = 32772;
+/**
+ *
+ * Request:  [transaction sequence number: 1] [node ID:2]
+ */
+export declare const ACTIVE_ENDPOINTS_REQUEST = 5;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status:1] [node ID:2] [endpoint count:1] [endpoint:1]*
+ */
+export declare const ACTIVE_ENDPOINTS_RESPONSE = 32773;
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [node ID:2] [app profile ID:2]
+ *           [input cluster count:1] [input cluster:2]*
+ *           [output cluster count:1] [output cluster:2]*
+ */
+export declare const MATCH_DESCRIPTORS_REQUEST = 6;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status:1] [node ID:2] [endpoint count:1] [endpoint:1]*
+ */
+export declare const MATCH_DESCRIPTORS_RESPONSE = 32774;
+/**
+ * Request: [transaction sequence number: 1]
+ *          [node ID:2] [EUI64:8] [capabilities:1]
+ */
+export declare const END_DEVICE_ANNOUNCE = 19;
+/**
+ * No response is sent.
+ */
+export declare const END_DEVICE_ANNOUNCE_RESPONSE = 32787;
+/**
+ * Request:  [transaction sequence number: 1] [server mask:2]
+ */
+export declare const SYSTEM_SERVER_DISCOVERY_REQUEST = 21;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status (== EMBER_ZDP_SUCCESS):1] [server mask:2]
+ */
+export declare const SYSTEM_SERVER_DISCOVERY_RESPONSE = 32789;
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [number of children:1] [child EUI64:8] [child Age:4]*
+ */
+export declare const PARENT_ANNOUNCE = 31;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [number of children:1] [child EUI64:8] [child Age:4]*
+ */
+export declare const PARENT_ANNOUNCE_RESPONSE = 32799;
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [device of interest ID:2] [d-of-i EUI64:8]
+ */
+export declare const FIND_NODE_CACHE_REQUEST = 28;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [responder ID:2] [device of interest ID:2] [d-of-i EUI64:8]
+ */
+export declare const FIND_NODE_CACHE_RESPONSE = 32796;
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [node ID:2] [EUI64:8] [endpoint:1] [app profile ID:2]
+ *           [input cluster count:1] [input cluster:2]*
+ *           [output cluster count:1] [output cluster:2]*
+ */
+export declare const END_DEVICE_BIND_REQUEST = 32;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+export declare const END_DEVICE_BIND_RESPONSE = 32800;
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [clear all bindings request EUI64 TLV:Variable]
+ * Clear all bindings request EUI64 TLV:
+ *           [Count N:1][EUI64 1:8]...[EUI64 N:8]
+ */
+export declare const CLEAR_ALL_BINDINGS_REQUEST = 43;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+export declare const CLEAR_ALL_BINDINGS_RESPONSE = 32811;
+/**
+ *
+ */
+export declare const UNICAST_BINDING = 3;
+/**
+ *
+ */
+export declare const UNICAST_MANY_TO_ONE_BINDING = 131;
+/**
+ *
+ */
+export declare const MULTICAST_BINDING = 1;
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [source EUI64:8] [source endpoint:1]
+ *           [cluster ID:2] [destination address:3 or 10]
+ * Destination address:
+ *           [0x01:1] [destination group:2]
+ * Or:
+ *           [0x03:1] [destination EUI64:8] [destination endpoint:1]
+ *
+ */
+export declare const BIND_REQUEST = 33;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+export declare const BIND_RESPONSE = 32801;
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [source EUI64:8] [source endpoint:1]
+ *           [cluster ID:2] [destination address:3 or 10]
+ * Destination address:
+ *           [0x01:1] [destination group:2]
+ * Or:
+ *           [0x03:1] [destination EUI64:8] [destination endpoint:1]
+ *
+ */
+export declare const UNBIND_REQUEST = 34;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+export declare const UNBIND_RESPONSE = 32802;
+/**
+ * Request:  [transaction sequence number: 1] [start index:1]
+ */
+export declare const LQI_TABLE_REQUEST = 49;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ *           [neighbor table entries:1] [start index:1]
+ *           [entry count:1] [entry:22]*
+ *   [entry] = [extended PAN ID:8] [EUI64:8] [node ID:2]
+ *             [device type, RX on when idle, relationship:1]
+ *             [permit joining:1] [depth:1] [LQI:1]
+ *
+ * The device-type byte has the following fields:
+ *
+ *      Name          Mask        Values
+ *
+ *   device type      0x03     0x00 coordinator
+ *                             0x01 router
+ *                             0x02 end device
+ *                             0x03 unknown
+ *
+ *   rx mode          0x0C     0x00 off when idle
+ *                             0x04 on when idle
+ *                             0x08 unknown
+ *
+ *   relationship     0x70     0x00 parent
+ *                             0x10 child
+ *                             0x20 sibling
+ *                             0x30 other
+ *                             0x40 previous child
+ *   reserved         0x10
+ *
+ * The permit-joining byte has the following fields
+ *
+ *      Name          Mask        Values
+ *
+ *   permit joining   0x03     0x00 not accepting join requests
+ *                             0x01 accepting join requests
+ *                             0x02 unknown
+ *   reserved         0xFC
+ *
+ */
+export declare const LQI_TABLE_RESPONSE = 32817;
+/**
+ * Request:  [transaction sequence number: 1] [start index:1]
+ */
+export declare const ROUTING_TABLE_REQUEST = 50;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ *           [routing table entries:1] [start index:1]
+ *           [entry count:1] [entry:5]*
+ *   [entry] = [destination address:2]
+ *             [status:1]
+ *             [next hop:2]
+ *
+ *
+ * The status byte has the following fields:
+ *      Name          Mask        Values
+ *
+ *   status           0x07     0x00 active
+ *                             0x01 discovery underway
+ *                             0x02 discovery failed
+ *                             0x03 inactive
+ *                             0x04 validation underway
+ *
+ *   flags            0x38
+ *                             0x08 memory constrained
+ *                             0x10 many-to-one
+ *                             0x20 route record required
+ *
+ *   reserved         0xC0
+ */
+export declare const ROUTING_TABLE_RESPONSE = 32818;
+/**
+ * Request:  [transaction sequence number: 1] [start index:1]
+ */
+export declare const BINDING_TABLE_REQUEST = 51;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status:1] [binding table entries:1] [start index:1]
+ *           [entry count:1] [entry:14/21]*
+ *   [entry] = [source EUI64:8] [source endpoint:1] [cluster ID:2]
+ *             [dest addr mode:1] [dest:2/8] [dest endpoint:0/1]
+ * [br]
+ * @note If Dest. Address Mode = 0x03, then the Long Dest. Address will be
+ * used and Dest. endpoint will be included.  If Dest. Address Mode = 0x01,
+ * then the Short Dest. Address will be used and there will be no Dest.
+ * endpoint.
+ */
+export declare const BINDING_TABLE_RESPONSE = 32819;
+/**
+ * Request:  [transaction sequence number: 1] [EUI64:8] [flags:1]
+ *          The flag bits are:
+ *          0x40 remove children
+ *          0x80 rejoin
+ */
+export declare const LEAVE_REQUEST = 52;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+export declare const LEAVE_RESPONSE = 32820;
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [duration:1] [permit authentication:1]
+ */
+export declare const PERMIT_JOINING_REQUEST = 54;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+export declare const PERMIT_JOINING_RESPONSE = 32822;
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [scan channels:4] [duration:1] [count:0/1] [manager:0/2]
+ *
+ *   If the duration is in 0x00 ... 0x05, 'count' is present but
+ *   not 'manager'.  Perform 'count' scans of the given duration on the
+ *   given channels.
+ *
+ *   If duration is 0xFE, 'channels' should have a single channel
+ *   and 'count' and 'manager' are not present.  Switch to the indicated
+ *   channel.
+ *
+ *   If duration is 0xFF, 'count' is not present.  Set the active
+ *   channels and the network manager ID to the values given.
+ *
+ *   Unicast requests always get a response, which is INVALID_REQUEST if the
+ *   duration is not a legal value.
+ */
+export declare const NWK_UPDATE_REQUEST = 56;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ *   [scanned channels:4] [transmissions:2] [failures:2]
+ *   [energy count:1] [energy:1]*
+ */
+export declare const NWK_UPDATE_RESPONSE = 32824;
+/**
+ *
+ */
+export declare const NWK_UPDATE_ENHANCED_REQUEST = 57;
+/**
+ *
+ */
+export declare const NWK_UPDATE_ENHANCED_RESPONSE = 32825;
+/**
+ *
+ */
+export declare const NWK_UPDATE_IEEE_JOINING_LIST_REQUEST = 58;
+/**
+ *
+ */
+export declare const NWK_UPDATE_IEEE_JOINING_LIST_REPONSE = 32826;
+/**
+ *
+ */
+export declare const NWK_UNSOLICITED_ENHANCED_UPDATE_NOTIFY = 32827;
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one Beacon Survey Configuration TLV (variable octets),
+ * which contain the ScanChannelListStructure (variable length)
+ * and the ConfigurationBitmask (1 octet). This information provides
+ * the configuration for the end device's beacon survey.
+ * See R23 spec section 2.4.3.3.12 for the request and 3.2.2.2.1
+ * for the ChannelListStructure.
+ */
+export declare const BEACON_SURVEY_REQUEST = 60;
+/**
+ *
+ * Response:  [transaction sequence number: 1]
+ *            [status: 1]
+ *            [TLVs: varies]
+ *
+ * Contains one Beacon Survey Results TLV (4 octets), which contain
+ * the number of on-network, off-network, potential parent and total
+ * beacons recorded. If the device that received the request is not a
+ * router, a Potential Parent TLV (variable octects) will be found. This
+ * will contain information on the device's current parent, as well as
+ * any potential parents found via beacons (up to a maximum of 5). A
+ * Pan ID Conflict TLV can also found in the response.
+ * See R23 spec section 2.4.4.3.13 for the response.
+ */
+export declare const BEACON_SURVEY_RESPONSE = 32828;
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more Curve25519 Public Point TLVs (40 octets),
+ * which contain an EUI64 and the 32-byte Curve public point.
+ * See R23 spec section 2.4.3.4.1
+ *
+ * @note This command SHALL NOT be APS encrypted regardless of
+ * whether sent before or after the device joins the network.
+ * This command SHALL be network encrypted if the device has a
+ * network key, i.e. it has joined the network earlier and wants
+ * to negotiate or renegotiate a new link key; otherwise, if it
+ * is used prior to joining the network, it SHALL NOT be network
+ *  encrypted.
+ */
+export declare const KEY_NEGOTIATION_REQUEST = 64;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more Curve25519 Public Point TLVs (40 octets),
+ * which contain an EUI64 and the 32-byte Curve public point, or
+ * Local TLVs.
+ * See R23 spec section 2.4.4.4.1
+ *
+ * @note This command SHALL NOT be APS encrypted. When performing
+ * Key Negotiation with an unauthenticated neighbor that is not
+ * yet on the network, network layer encryption SHALL NOT be used
+ * on the message. If the message is being sent to unauthenticated
+ * device that is not on the network and is not a neighbor, it
+ * SHALL be relayed as described in section 4.6.3.7.7. Otherwise
+ * the message SHALL have network layer encryption.
+ */
+export declare const KEY_NEGOTIATION_RESPONSE = 32832;
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more Authentication Token ID TLVs (1 octet),
+ * which contain the TLV Type Tag ID of the source of the
+ * authentication token. See R23 spec section 2.4.3.4.2
+ */
+export declare const AUTHENTICATION_TOKEN_REQUEST = 65;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more 128-bit Symmetric Passphrase Global TLVs
+ * (16 octets), which contain the symmetric passphrase authentication
+ * token. See R23 spec section 2.4.4.4.2
+ */
+export declare const AUTHENTICATION_TOKEN_RESPONSE = 32833;
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more Target IEEE Address TLVs (8 octets),
+ * which contain the EUI64 of the device of interest.
+ * See R23 spec section 2.4.3.4.3
+ */
+export declare const AUTHENTICATION_LEVEL_REQUEST = 66;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more Device Authentication Level TLVs
+ * (10 octets), which contain the EUI64 of the inquired device,
+ * along with the its initial join method and its active link
+ * key update method.
+ * See R23 spec section 2.4.4.4.3
+ */
+export declare const AUTHENTICATION_LEVEL_RESPONSE = 32834;
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more Global TLVs (1 octet),
+ * which contain the TLV Type Tag ID, and their
+ * value.
+ */
+export declare const SET_CONFIGURATION_REQUEST = 67;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+export declare const SET_CONFIGURATION_RESPONSE = 32835;
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more TLVs (1 octet),
+ * which the sender wants to get information
+ */
+export declare const GET_CONFIGURATION_REQUEST = 68;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more TLV tag Ids and their values
+ * in response to the request
+ */
+export declare const GET_CONFIGURATION_RESPONSE = 32836;
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more TLVs. These TLVs can be Selected Key
+ * Negotiation Method TLVs (10 octets), Fragmentation Parameters
+ * Global TLVs (5 octets), or other TLVs.
+ * See R23 spec section 2.4.3.4.6
+ *
+ * @note This SHALL NOT be APS encrypted or NWK encrypted if the
+ * link key update mechanism is done as part of the initial join
+ * and before the receiving device has been issued a network
+ * key. This SHALL be both APS encrypted and NWK encrypted if
+ * the link key update mechanism is performed to refresh the
+ * link key when the receiving device has the network key and
+ * has previously successfully joined the network.
+ */
+export declare const KEY_UPDATE_REQUEST = 69;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ *
+ * See R23 spec section 2.4.4.4.6
+ *
+ * @note This command SHALL be APS encrypted.
+ */
+export declare const KEY_UPDATE_RESPONSE = 32837;
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [security decommission request EUI64 TLV:Variable]
+ * Security Decommission request EUI64 TLV:
+ *           [Count N:1][EUI64 1:8]...[EUI64 N:8]
+ */
+export declare const SECURITY_DECOMMISSION_REQUEST = 70;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+export declare const SECURITY_DECOMMISSION_RESPONSE = 32838;
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains at least the APS Frame Counter Challenge TLV, which holds the
+ * sender EUI and the 64 bit challenge value.
+ */
+export declare const SECURITY_CHALLENGE_REQUEST = 71;
+/**
+ *
+ * Response: [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains at least the APS Frame Counter Response TLV, which holds the
+ * sender EUI, received challenge value, APS frame counter, challenge
+ * security frame counter, and 8-byte MIC.
+ */
+export declare const SECURITY_CHALLENGE_RESPONSE = 32839;
+/**
+ *
+ */
+export declare const COMPLEX_DESCRIPTOR_REQUEST = 16;
+/**
+ *
+ */
+export declare const COMPLEX_DESCRIPTOR_RESPONSE = 32784;
+/**
+ *
+ */
+export declare const USER_DESCRIPTOR_REQUEST = 17;
+/**
+ *
+ */
+export declare const USER_DESCRIPTOR_RESPONSE = 32785;
+/**
+ *
+ */
+export declare const DISCOVERY_REGISTER_REQUEST = 18;
+/**
+ *
+ */
+export declare const DISCOVERY_REGISTER_RESPONSE = 32786;
+/**
+ *
+ */
+export declare const USER_DESCRIPTOR_SET = 20;
+/**
+ *
+ */
+export declare const USER_DESCRIPTOR_CONFIRM = 32788;
+/**
+ *
+ */
+export declare const NETWORK_DISCOVERY_REQUEST = 48;
+/**
+ *
+ */
+export declare const NETWORK_DISCOVERY_RESPONSE = 32816;
+/**
+ *
+ */
+export declare const DIRECT_JOIN_REQUEST = 53;
+/**
+ *
+ */
+export declare const DIRECT_JOIN_RESPONSE = 32821;
+/**
+ * Response: [transaction sequence number: 1]
+ *            [status (== EMBER_ZDP_SUCCESS):1]
+ */
+export declare const DISCOVERY_CACHE_REQUEST = 18;
+/**
+ * Request:  [transaction sequence number: 1]
+ *            [source node ID:2] [source EUI64:8]
+ */
+export declare const DISCOVERY_CACHE_RESPONSE = 32786;
+export declare const CLUSTER_ID_RESPONSE_MINIMUM = 32768;
+//# sourceMappingURL=zdo.d.ts.map