@willieee802/zigbee-herdsman 0.19.2 → 0.34.3

package/dist/adapter/ember/ezsp/enums.d.ts

@@ -0,0 +1,879 @@
+/** EZSP Frame IDs */
+export declare enum EzspFrameID {
+    VERSION = 0,
+    GET_CONFIGURATION_VALUE = 82,
+    SET_CONFIGURATION_VALUE = 83,
+    READ_ATTRIBUTE = 264,
+    WRITE_ATTRIBUTE = 265,
+    ADD_ENDPOINT = 2,
+    SET_POLICY = 85,
+    GET_POLICY = 86,
+    SEND_PAN_ID_UPDATE = 87,
+    GET_VALUE = 170,
+    GET_EXTENDED_VALUE = 3,
+    SET_VALUE = 171,
+    SET_PASSIVE_ACK_CONFIG = 261,
+    NOP = 5,
+    ECHO = 129,
+    INVALID_COMMAND = 88,
+    CALLBACK = 6,
+    NO_CALLBACKS = 7,
+    SET_TOKEN = 9,
+    GET_TOKEN = 10,
+    GET_MFG_TOKEN = 11,
+    SET_MFG_TOKEN = 12,
+    STACK_TOKEN_CHANGED_HANDLER = 13,
+    GET_RANDOM_NUMBER = 73,
+    SET_TIMER = 14,
+    GET_TIMER = 78,
+    TIMER_HANDLER = 15,
+    DEBUG_WRITE = 18,
+    READ_AND_CLEAR_COUNTERS = 101,
+    READ_COUNTERS = 241,
+    COUNTER_ROLLOVER_HANDLER = 242,
+    DELAY_TEST = 157,
+    GET_LIBRARY_STATUS = 1,
+    GET_XNCP_INFO = 19,
+    CUSTOM_FRAME = 71,
+    CUSTOM_FRAME_HANDLER = 84,
+    GET_EUI64 = 38,
+    GET_NODE_ID = 39,
+    GET_PHY_INTERFACE_COUNT = 252,
+    GET_TRUE_RANDOM_ENTROPY_SOURCE = 79,
+    SET_MANUFACTURER_CODE = 21,
+    SET_POWER_DESCRIPTOR = 22,
+    NETWORK_INIT = 23,
+    NETWORK_STATE = 24,
+    STACK_STATUS_HANDLER = 25,
+    START_SCAN = 26,
+    ENERGY_SCAN_RESULT_HANDLER = 72,
+    NETWORK_FOUND_HANDLER = 27,
+    SCAN_COMPLETE_HANDLER = 28,
+    UNUSED_PAN_ID_FOUND_HANDLER = 210,
+    FIND_UNUSED_PAN_ID = 211,
+    STOP_SCAN = 29,
+    FORM_NETWORK = 30,
+    JOIN_NETWORK = 31,
+    JOIN_NETWORK_DIRECTLY = 59,
+    LEAVE_NETWORK = 32,
+    FIND_AND_REJOIN_NETWORK = 33,
+    PERMIT_JOINING = 34,
+    CHILD_JOIN_HANDLER = 35,
+    ENERGY_SCAN_REQUEST = 156,
+    GET_NETWORK_PARAMETERS = 40,
+    GET_RADIO_PARAMETERS = 253,
+    GET_PARENT_CHILD_PARAMETERS = 41,
+    GET_CHILD_DATA = 74,
+    SET_CHILD_DATA = 172,
+    CHILD_ID = 262,
+    CHILD_INDEX = 263,
+    GET_SOURCE_ROUTE_TABLE_TOTAL_SIZE = 195,
+    GET_SOURCE_ROUTE_TABLE_FILLED_SIZE = 194,
+    GET_SOURCE_ROUTE_TABLE_ENTRY = 193,
+    GET_NEIGHBOR = 121,
+    GET_NEIGHBOR_FRAME_COUNTER = 62,
+    SET_NEIGHBOR_FRAME_COUNTER = 173,
+    SET_ROUTING_SHORTCUT_THRESHOLD = 208,
+    GET_ROUTING_SHORTCUT_THRESHOLD = 209,
+    NEIGHBOR_COUNT = 122,
+    GET_ROUTE_TABLE_ENTRY = 123,
+    SET_RADIO_POWER = 153,
+    SET_RADIO_CHANNEL = 154,
+    GET_RADIO_CHANNEL = 255,
+    SET_RADIO_IEEE802154_CCA_MODE = 149,
+    SET_CONCENTRATOR = 16,
+    SET_BROKEN_ROUTE_ERROR_CODE = 17,
+    MULTI_PHY_START = 248,
+    MULTI_PHY_STOP = 249,
+    MULTI_PHY_SET_RADIO_POWER = 250,
+    SEND_LINK_POWER_DELTA_REQUEST = 247,
+    MULTI_PHY_SET_RADIO_CHANNEL = 251,
+    GET_DUTY_CYCLE_STATE = 53,
+    SET_DUTY_CYCLE_LIMITS_IN_STACK = 64,
+    GET_DUTY_CYCLE_LIMITS = 75,
+    GET_CURRENT_DUTY_CYCLE = 76,
+    DUTY_CYCLE_HANDLER = 77,
+    GET_FIRST_BEACON = 61,
+    GET_NEXT_BEACON = 4,
+    GET_NUM_STORED_BEACONS = 8,
+    CLEAR_STORED_BEACONS = 60,
+    SET_LOGICAL_AND_RADIO_CHANNEL = 185,
+    CLEAR_BINDING_TABLE = 42,
+    SET_BINDING = 43,
+    GET_BINDING = 44,
+    DELETE_BINDING = 45,
+    BINDING_IS_ACTIVE = 46,
+    GET_BINDING_REMOTE_NODE_ID = 47,
+    SET_BINDING_REMOTE_NODE_ID = 48,
+    REMOTE_SET_BINDING_HANDLER = 49,
+    REMOTE_DELETE_BINDING_HANDLER = 50,
+    MAXIMUM_PAYLOAD_LENGTH = 51,
+    SEND_UNICAST = 52,
+    SEND_BROADCAST = 54,
+    PROXY_BROADCAST = 55,
+    SEND_MULTICAST = 56,
+    SEND_MULTICAST_WITH_ALIAS = 58,
+    SEND_REPLY = 57,
+    MESSAGE_SENT_HANDLER = 63,
+    SEND_MANY_TO_ONE_ROUTE_REQUEST = 65,
+    POLL_FOR_DATA = 66,
+    POLL_COMPLETE_HANDLER = 67,
+    POLL_HANDLER = 68,
+    INCOMING_SENDER_EUI64_HANDLER = 98,
+    INCOMING_MESSAGE_HANDLER = 69,
+    SET_SOURCE_ROUTE_DISCOVERY_MODE = 90,
+    INCOMING_MANY_TO_ONE_ROUTE_REQUEST_HANDLER = 125,
+    INCOMING_ROUTE_ERROR_HANDLER = 128,
+    INCOMING_NETWORK_STATUS_HANDLER = 196,
+    INCOMING_ROUTE_RECORD_HANDLER = 89,
+    SET_SOURCE_ROUTE = 174,
+    UNICAST_CURRENT_NETWORK_KEY = 80,
+    ADDRESS_TABLE_ENTRY_IS_ACTIVE = 91,
+    SET_ADDRESS_TABLE_REMOTE_EUI64 = 92,
+    SET_ADDRESS_TABLE_REMOTE_NODE_ID = 93,
+    GET_ADDRESS_TABLE_REMOTE_EUI64 = 94,
+    GET_ADDRESS_TABLE_REMOTE_NODE_ID = 95,
+    SET_EXTENDED_TIMEOUT = 126,
+    GET_EXTENDED_TIMEOUT = 127,
+    REPLACE_ADDRESS_TABLE_ENTRY = 130,
+    LOOKUP_NODE_ID_BY_EUI64 = 96,
+    LOOKUP_EUI64_BY_NODE_ID = 97,
+    GET_MULTICAST_TABLE_ENTRY = 99,
+    SET_MULTICAST_TABLE_ENTRY = 100,
+    ID_CONFLICT_HANDLER = 124,
+    WRITE_NODE_DATA = 254,
+    SEND_RAW_MESSAGE = 150,
+    SEND_RAW_MESSAGE_EXTENDED = 81,
+    MAC_PASSTHROUGH_MESSAGE_HANDLER = 151,
+    MAC_FILTER_MATCH_MESSAGE_HANDLER = 70,
+    RAW_TRANSMIT_COMPLETE_HANDLER = 152,
+    SET_MAC_POLL_FAILURE_WAIT_TIME = 244,
+    SET_BEACON_CLASSIFICATION_PARAMS = 239,
+    GET_BEACON_CLASSIFICATION_PARAMS = 243,
+    SET_INITIAL_SECURITY_STATE = 104,
+    GET_CURRENT_SECURITY_STATE = 105,
+    EXPORT_KEY = 276,
+    IMPORT_KEY = 277,
+    SWITCH_NETWORK_KEY_HANDLER = 110,
+    FIND_KEY_TABLE_ENTRY = 117,
+    SEND_TRUST_CENTER_LINK_KEY = 103,
+    ERASE_KEY_TABLE_ENTRY = 118,
+    CLEAR_KEY_TABLE = 177,
+    REQUEST_LINK_KEY = 20,
+    UPDATE_TC_LINK_KEY = 108,
+    ZIGBEE_KEY_ESTABLISHMENT_HANDLER = 155,
+    CLEAR_TRANSIENT_LINK_KEYS = 107,
+    GET_NETWORK_KEY_INFO = 278,
+    GET_APS_KEY_INFO = 268,
+    IMPORT_LINK_KEY = 270,
+    EXPORT_LINK_KEY_BY_INDEX = 271,
+    EXPORT_LINK_KEY_BY_EUI = 269,
+    CHECK_KEY_CONTEXT = 272,
+    IMPORT_TRANSIENT_KEY = 273,
+    EXPORT_TRANSIENT_KEY_BY_INDEX = 274,
+    EXPORT_TRANSIENT_KEY_BY_EUI = 275,
+    TRUST_CENTER_JOIN_HANDLER = 36,
+    BROADCAST_NEXT_NETWORK_KEY = 115,
+    BROADCAST_NETWORK_KEY_SWITCH = 116,
+    AES_MMO_HASH = 111,
+    REMOVE_DEVICE = 168,
+    UNICAST_NWK_KEY_UPDATE = 169,
+    GENERATE_CBKE_KEYS = 164,
+    GENERATE_CBKE_KEYS_HANDLER = 158,
+    CALCULATE_SMACS = 159,
+    CALCULATE_SMACS_HANDLER = 160,
+    GENERATE_CBKE_KEYS283K1 = 232,
+    GENERATE_CBKE_KEYS_HANDLER283K1 = 233,
+    CALCULATE_SMACS283K1 = 234,
+    CALCULATE_SMACS_HANDLER283K1 = 235,
+    CLEAR_TEMPORARY_DATA_MAYBE_STORE_LINK_KEY = 161,
+    CLEAR_TEMPORARY_DATA_MAYBE_STORE_LINK_KEY283K1 = 238,
+    GET_CERTIFICATE = 165,
+    GET_CERTIFICATE283K1 = 236,
+    DSA_SIGN = 166,
+    DSA_SIGN_HANDLER = 167,
+    DSA_VERIFY = 163,
+    DSA_VERIFY_HANDLER = 120,
+    DSA_VERIFY283K1 = 176,
+    SET_PREINSTALLED_CBKE_DATA = 162,
+    SAVE_PREINSTALLED_CBKE_DATA283K1 = 237,
+    MFGLIB_START = 131,
+    MFGLIB_END = 132,
+    MFGLIB_START_TONE = 133,
+    MFGLIB_STOP_TONE = 134,
+    MFGLIB_START_STREAM = 135,
+    MFGLIB_STOP_STREAM = 136,
+    MFGLIB_SEND_PACKET = 137,
+    MFGLIB_SET_CHANNEL = 138,
+    MFGLIB_GET_CHANNEL = 139,
+    MFGLIB_SET_POWER = 140,
+    MFGLIB_GET_POWER = 141,
+    MFGLIB_RX_HANDLER = 142,
+    LAUNCH_STANDALONE_BOOTLOADER = 143,
+    SEND_BOOTLOAD_MESSAGE = 144,
+    GET_STANDALONE_BOOTLOADER_VERSION_PLAT_MICRO_PHY = 145,
+    INCOMING_BOOTLOAD_MESSAGE_HANDLER = 146,
+    BOOTLOAD_TRANSMIT_COMPLETE_HANDLER = 147,
+    AES_ENCRYPT = 148,
+    ZLL_NETWORK_OPS = 178,
+    ZLL_SET_INITIAL_SECURITY_STATE = 179,
+    ZLL_SET_SECURITY_STATE_WITHOUT_KEY = 207,
+    ZLL_START_SCAN = 180,
+    ZLL_SET_RX_ON_WHEN_IDLE = 181,
+    ZLL_NETWORK_FOUND_HANDLER = 182,
+    ZLL_SCAN_COMPLETE_HANDLER = 183,
+    ZLL_ADDRESS_ASSIGNMENT_HANDLER = 184,
+    ZLL_TOUCH_LINK_TARGET_HANDLER = 187,
+    ZLL_GET_TOKENS = 188,
+    ZLL_SET_DATA_TOKEN = 189,
+    ZLL_SET_NON_ZLL_NETWORK = 191,
+    IS_ZLL_NETWORK = 190,
+    ZLL_SET_RADIO_IDLE_MODE = 212,
+    ZLL_GET_RADIO_IDLE_MODE = 186,
+    SET_ZLL_NODE_TYPE = 213,
+    SET_ZLL_ADDITIONAL_STATE = 214,
+    ZLL_OPERATION_IN_PROGRESS = 215,
+    ZLL_RX_ON_WHEN_IDLE_GET_ACTIVE = 216,
+    ZLL_SCANNING_COMPLETE = 246,
+    GET_ZLL_PRIMARY_CHANNEL_MASK = 217,
+    GET_ZLL_SECONDARY_CHANNEL_MASK = 218,
+    SET_ZLL_PRIMARY_CHANNEL_MASK = 219,
+    SET_ZLL_SECONDARY_CHANNEL_MASK = 220,
+    ZLL_CLEAR_TOKENS = 37,
+    SET_PARENT_CLASSIFICATION_ENABLED = 231,
+    GET_PARENT_CLASSIFICATION_ENABLED = 240,
+    SET_LONG_UP_TIME = 227,
+    SET_HUB_CONNECTIVITY = 228,
+    IS_UP_TIME_LONG = 229,
+    IS_HUB_CONNECTED = 230,
+    GP_PROXY_TABLE_PROCESS_GP_PAIRING = 201,
+    D_GP_SEND = 198,
+    D_GP_SENT_HANDLER = 199,
+    GPEP_INCOMING_MESSAGE_HANDLER = 197,
+    GP_PROXY_TABLE_GET_ENTRY = 200,
+    GP_PROXY_TABLE_LOOKUP = 192,
+    GP_SINK_TABLE_GET_ENTRY = 221,
+    GP_SINK_TABLE_LOOKUP = 222,
+    GP_SINK_TABLE_SET_ENTRY = 223,
+    GP_SINK_TABLE_REMOVE_ENTRY = 224,
+    GP_SINK_TABLE_FIND_OR_ALLOCATE_ENTRY = 225,
+    GP_SINK_TABLE_CLEAR_ALL = 226,
+    GP_SINK_TABLE_INIT = 112,
+    GP_SINK_TABLE_SET_SECURITY_FRAME_COUNTER = 245,
+    GP_SINK_COMMISSION = 266,
+    GP_TRANSLATION_TABLE_CLEAR = 267,
+    GP_SINK_TABLE_GET_NUMBER_OF_ACTIVE_ENTRIES = 280,
+    GET_TOKEN_COUNT = 256,
+    GET_TOKEN_INFO = 257,
+    GET_TOKEN_DATA = 258,
+    SET_TOKEN_DATA = 259,
+    RESET_NODE = 260,
+    GP_SECURITY_TEST_VECTORS = 279,
+    TOKEN_FACTORY_RESET = 119
+}
+/** Identifies a configuration value. uint8_t */
+export declare enum EzspConfigId {
+    /**
+     * The NCP no longer supports configuration of packet buffer count at runtime
+     * using this parameter. Packet buffers must be configured using the
+     * EMBER_PACKET_BUFFER_COUNT macro when building the NCP project.
+     */
+    PACKET_BUFFER_COUNT = 1,
+    /**
+     * The maximum number of router neighbors the stack can keep track of. A
+     * neighbor is a node within radio range.
+     */
+    NEIGHBOR_TABLE_SIZE = 2,
+    /**
+     * The maximum number of APS retried messages the stack can be transmitting at
+     * any time.
+     */
+    APS_UNICAST_MESSAGE_COUNT = 3,
+    /**
+     * The maximum number of non-volatile bindings supported by the stack.
+     */
+    BINDING_TABLE_SIZE = 4,
+    /**
+     * The maximum number of EUI64 to network address associations that the stack
+     * can maintain for the application. (Note, the total number of such address
+     * associations maintained by the NCP is the sum of the value of this setting
+     * and the value of ::TRUST_CENTER_ADDRESS_CACHE_SIZE.
+     */
+    ADDRESS_TABLE_SIZE = 5,
+    /**
+     * The maximum number of multicast groups that the device may be a member of.
+     */
+    MULTICAST_TABLE_SIZE = 6,
+    /**
+     * The maximum number of destinations to which a node can route messages. This
+     * includes both messages originating at this node and those relayed for
+     * others.
+     */
+    ROUTE_TABLE_SIZE = 7,
+    /**
+     * The number of simultaneous route discoveries that a node will support.
+     */
+    DISCOVERY_TABLE_SIZE = 8,
+    /**
+     * Specifies the stack profile.
+     */
+    STACK_PROFILE = 12,
+    /**
+     * The security level used for security at the MAC and network layers. The
+     * supported values are 0 (no security) and 5 (payload is encrypted and a
+     * four-byte MIC is used for authentication).
+     */
+    SECURITY_LEVEL = 13,
+    /**
+     * The maximum number of hops for a message.
+     */
+    MAX_HOPS = 16,
+    /**
+     * The maximum number of end device children that a router will support.
+     */
+    MAX_END_DEVICE_CHILDREN = 17,
+    /**
+     * The maximum amount of time that the MAC will hold a message for indirect
+     * transmission to a child.
+     */
+    INDIRECT_TRANSMISSION_TIMEOUT = 18,
+    /**
+     * The maximum amount of time that an end device child can wait between polls.
+     * If no poll is heard within this timeout, then the parent removes the end
+     * device from its tables. Value range 0-14. The timeout corresponding to a
+     * value of zero is 10 seconds. The timeout corresponding to a nonzero value N
+     * is 2^N minutes, ranging from 2^1 = 2 minutes to 2^14 = 16384 minutes.
+     */
+    END_DEVICE_POLL_TIMEOUT = 19,
+    /**
+     * Enables boost power mode and/or the alternate transmitter output.
+     */
+    TX_POWER_MODE = 23,
+    /**
+     * 0: Allow this node to relay messages. 1: Prevent this node from relaying
+     * messages.
+     */
+    DISABLE_RELAY = 24,
+    /**
+     * The maximum number of EUI64 to network address associations that the Trust
+     * Center can maintain. These address cache entries are reserved for and
+     * reused by the Trust Center when processing device join/rejoin
+     * authentications. This cache size limits the number of overlapping joins the
+     * Trust Center can process within a narrow time window (e.g. two seconds),
+     * and thus should be set to the maximum number of near simultaneous joins the
+     * Trust Center is expected to accommodate. (Note, the total number of such
+     * address associations maintained by the NCP is the sum of the value of this
+     * setting and the value of ::ADDRESS_TABLE_SIZE.)
+     */
+    TRUST_CENTER_ADDRESS_CACHE_SIZE = 25,
+    /**
+     * The size of the source route table.
+     */
+    SOURCE_ROUTE_TABLE_SIZE = 26,
+    /** The number of blocks of a fragmented message that can be sent in a single window. */
+    FRAGMENT_WINDOW_SIZE = 28,
+    /** The time the stack will wait (in milliseconds) between sending blocks of a fragmented message. */
+    FRAGMENT_DELAY_MS = 29,
+    /**
+     * The size of the Key Table used for storing individual link keys (if the
+     * device is a Trust Center) or Application Link Keys (if the device is a normal node).
+     */
+    KEY_TABLE_SIZE = 30,
+    /** The APS ACK timeout value. The stack waits this amount of time between resends of APS retried messages. */
+    APS_ACK_TIMEOUT = 31,
+    /**
+     * The duration of a beacon jitter, in the units used by the 15.4 scan
+     * parameter (((1 << duration) + 1) * 15ms), when responding to a beacon request.
+     */
+    BEACON_JITTER_DURATION = 32,
+    /** The number of PAN id conflict reports that must be received by the network manager within one minute to trigger a PAN id change. */
+    PAN_ID_CONFLICT_REPORT_THRESHOLD = 34,
+    /**
+     * The timeout value in minutes for how long the Trust Center or a normal node
+     * waits for the ZigBee Request Key to complete. On the Trust Center this
+     * controls whether or not the device buffers the request, waiting for a
+     * matching pair of ZigBee Request Key. If the value is non-zero, the Trust
+     * Center buffers and waits for that amount of time. If the value is zero, the
+     * Trust Center does not buffer the request and immediately responds to the
+     * request. Zero is the most compliant behavior.
+     */
+    REQUEST_KEY_TIMEOUT = 36,
+    /**
+     * This value indicates the size of the runtime modifiable certificate table.
+     * Normally certificates are stored in MFG tokens but this table can be used
+     * to field upgrade devices with new Smart Energy certificates. This value
+     * cannot be set, it can only be queried.
+     */
+    CERTIFICATE_TABLE_SIZE = 41,
+    /**
+     * This is a bitmask that controls which incoming ZDO request messages are
+     * passed to the application. The bits are defined in the
+     * EmberZdoConfigurationFlags enumeration. To see if the application is
+     * required to send a ZDO response in reply to an incoming message, the
+     * application must check the APS options bitfield within the
+     * incomingMessageHandler callback to see if the
+     * EMBER_APS_OPTION_ZDO_RESPONSE_REQUIRED flag is set.
+     */
+    APPLICATION_ZDO_FLAGS = 42,
+    /** The maximum number of broadcasts during a single broadcast timeout period. */
+    BROADCAST_TABLE_SIZE = 43,
+    /** The size of the MAC filter list table. */
+    MAC_FILTER_TABLE_SIZE = 44,
+    /** The number of supported networks. */
+    SUPPORTED_NETWORKS = 45,
+    /**
+     * Whether multicasts are sent to the RxOnWhenIdle=true address (0xFFFD) or
+     * the sleepy broadcast address (0xFFFF). The RxOnWhenIdle=true address is the
+     * ZigBee compliant destination for multicasts.
+     */
+    SEND_MULTICASTS_TO_SLEEPY_ADDRESS = 46,
+    /** ZLL group address initial configuration. */
+    ZLL_GROUP_ADDRESSES = 47,
+    /** ZLL rssi threshold initial configuration. */
+    ZLL_RSSI_THRESHOLD = 48,
+    /** Toggles the MTORR flow control in the stack. */
+    MTORR_FLOW_CONTROL = 51,
+    /** Setting the retry queue size. Applies to all queues. Default value in the sample applications is 16. */
+    RETRY_QUEUE_SIZE = 52,
+    /**
+     * Setting the new broadcast entry threshold. The number (BROADCAST_TABLE_SIZE
+     * - NEW_BROADCAST_ENTRY_THRESHOLD) of broadcast table entries are reserved
+     * for relaying the broadcast messages originated on other devices. The local
+     * device will fail to originate a broadcast message after this threshold is
+     * reached. Setting this value to BROADCAST_TABLE_SIZE and greater will
+     * effectively kill this limitation.
+     */
+    NEW_BROADCAST_ENTRY_THRESHOLD = 53,
+    /**
+     * The length of time, in seconds, that a trust center will store a transient
+     * link key that a device can use to join its network. A transient key is
+     * added with a call to emberAddTransientLinkKey. After the transient key is
+     * added, it will be removed once this amount of time has passed. A joining
+     * device will not be able to use that key to join until it is added again on
+     * the trust center. The default value is 300 seconds, i.e., 5 minutes.
+     */
+    TRANSIENT_KEY_TIMEOUT_S = 54,
+    /** The number of passive acknowledgements to record from neighbors before we stop re-transmitting broadcasts */
+    BROADCAST_MIN_ACKS_NEEDED = 55,
+    /**
+     * The length of time, in seconds, that a trust center will allow a Trust
+     * Center (insecure) rejoin for a device that is using the well-known link
+     * key. This timeout takes effect once rejoins using the well-known key has
+     * been allowed. This command updates the
+     * sli_zigbee_allow_tc_rejoins_using_well_known_key_timeout_sec value.
+     */
+    TC_REJOINS_USING_WELL_KNOWN_KEY_TIMEOUT_S = 56,
+    /** Valid range of a CTUNE value is 0x0000-0x01FF. Higher order bits (0xFE00) of the 16-bit value are ignored. */
+    CTUNE_VALUE = 57,
+    /**
+     * To configure non trust center node to assume a concentrator type of the
+     * trust center it join to, until it receive many-to-one route request from
+     * the trust center. For the trust center node, concentrator type is
+     * configured from the concentrator plugin. The stack by default assumes trust
+     * center be a low RAM concentrator that make other devices send route record
+     * to the trust center even without receiving a many-to-one route request. The
+     * default concentrator type can be changed by setting appropriate
+     * EmberAssumeTrustCenterConcentratorType config value.
+     */
+    ASSUME_TC_CONCENTRATOR_TYPE = 64,
+    /** This is green power proxy table size. This value is read-only and cannot be set at runtime */
+    GP_PROXY_TABLE_SIZE = 65,
+    /** This is green power sink table size. This value is read-only and cannot be set at runtime */
+    GP_SINK_TABLE_SIZE = 66
+}
+/** Identifies a policy decision. */
+export declare enum EzspDecisionId {
+    /**
+     * BINDING_MODIFICATION_POLICY default decision.
+     *
+     * Do not allow the local binding table to be changed by remote nodes.
+     */
+    DISALLOW_BINDING_MODIFICATION = 16,
+    /**
+     * BINDING_MODIFICATION_POLICY decision.
+     *
+     * Allow remote nodes to change the local binding table.
+     */
+    ALLOW_BINDING_MODIFICATION = 17,
+    /**
+     * BINDING_MODIFICATION_POLICY decision.
+     *
+     * Allows remote nodes to set local binding entries only if the entries correspond to endpoints
+     * defined on the device, and for output clusters bound to those endpoints.
+     */
+    CHECK_BINDING_MODIFICATIONS_ARE_VALID_ENDPOINT_CLUSTERS = 18,
+    /**
+     * UNICAST_REPLIES_POLICY default decision.
+     *
+     * The NCP will automatically send an empty reply (containing no payload) for every unicast received.
+     * */
+    HOST_WILL_NOT_SUPPLY_REPLY = 32,
+    /**
+     * UNICAST_REPLIES_POLICY decision.
+     *
+     * The NCP will only send a reply if it receives a sendReply command from the Host.
+     */
+    HOST_WILL_SUPPLY_REPLY = 33,
+    /**
+     * POLL_HANDLER_POLICY default decision.
+     *
+     * Do not inform the Host when a child polls.
+     */
+    POLL_HANDLER_IGNORE = 48,
+    /**
+     * POLL_HANDLER_POLICY decision.
+     *
+     * Generate a pollHandler callback when a child polls.
+     */
+    POLL_HANDLER_CALLBACK = 49,
+    /**
+     * MESSAGE_CONTENTS_IN_CALLBACK_POLICY default decision.
+     *
+     * Include only the message tag in the messageSentHandler callback.
+     */
+    MESSAGE_TAG_ONLY_IN_CALLBACK = 64,
+    /**
+     * MESSAGE_CONTENTS_IN_CALLBACK_POLICY decision.
+     *
+     * Include both the message tag and the message contents in the messageSentHandler callback.
+     */
+    MESSAGE_TAG_AND_CONTENTS_IN_CALLBACK = 65,
+    /**
+     * TC_KEY_REQUEST_POLICY decision.
+     *
+     * When the Trust Center receives a request for a Trust Center link key, it will be ignored.
+     */
+    DENY_TC_KEY_REQUESTS = 80,
+    /**
+     * TC_KEY_REQUEST_POLICY decision.
+     *
+     * When the Trust Center receives a request for a Trust Center link key, it will reply to it with the corresponding key.
+     */
+    ALLOW_TC_KEY_REQUESTS_AND_SEND_CURRENT_KEY = 81,
+    /**
+     * TC_KEY_REQUEST_POLICY decision.
+     *
+     * When the Trust Center receives a request for a Trust Center link key, it will generate a key to send to the joiner.
+     * After generation, the key will be added to the transient key tabe and After verification, this key will be added into the link key table.
+     */
+    ALLOW_TC_KEY_REQUEST_AND_GENERATE_NEW_KEY = 82,
+    /**
+     * APP_KEY_REQUEST_POLICY decision.
+     * When the Trust Center receives a request for an application link key, it will be ignored.
+     * */
+    DENY_APP_KEY_REQUESTS = 96,
+    /**
+     * APP_KEY_REQUEST_POLICY decision.
+     *
+     * When the Trust Center receives a request for an application link key, it will randomly generate a key and send it to both partners.
+     */
+    ALLOW_APP_KEY_REQUESTS = 97,
+    /** Indicates that packet validate library checks are enabled on the NCP. */
+    PACKET_VALIDATE_LIBRARY_CHECKS_ENABLED = 98,
+    /** Indicates that packet validate library checks are NOT enabled on the NCP. */
+    PACKET_VALIDATE_LIBRARY_CHECKS_DISABLED = 99
+}
+/**
+ * This is the policy decision bitmask that controls the trust center decision strategies.
+ * The bitmask is modified and extracted from the EzspDecisionId for supporting bitmask operations.
+ * uint16_t
+ */
+export declare enum EzspDecisionBitmask {
+    /** Disallow joins and rejoins. */
+    DEFAULT_CONFIGURATION = 0,
+    /** Send the network key to all joining devices. */
+    ALLOW_JOINS = 1,
+    /** Send the network key to all rejoining devices. */
+    ALLOW_UNSECURED_REJOINS = 2,
+    /** Send the network key in the clear. */
+    SEND_KEY_IN_CLEAR = 4,
+    /** Do nothing for unsecured rejoins. */
+    IGNORE_UNSECURED_REJOINS = 8,
+    /** Allow joins if there is an entry in the transient key table. */
+    JOINS_USE_INSTALL_CODE_KEY = 16,
+    /** Delay sending the network key to a new joining device. */
+    DEFER_JOINS = 32
+}
+/** Identifies a policy. */
+export declare enum EzspPolicyId {
+    /** Controls trust center behavior. */
+    TRUST_CENTER_POLICY = 0,
+    /** Controls how external binding modification requests are handled. */
+    BINDING_MODIFICATION_POLICY = 1,
+    /** Controls whether the Host supplies unicast replies. */
+    UNICAST_REPLIES_POLICY = 2,
+    /** Controls whether pollHandler callbacks are generated. */
+    POLL_HANDLER_POLICY = 3,
+    /** Controls whether the message contents are included in the messageSentHandler callback. */
+    MESSAGE_CONTENTS_IN_CALLBACK_POLICY = 4,
+    /** Controls whether the Trust Center will respond to Trust Center link key requests. */
+    TC_KEY_REQUEST_POLICY = 5,
+    /** Controls whether the Trust Center will respond to application link key requests. */
+    APP_KEY_REQUEST_POLICY = 6,
+    /**
+     * Controls whether ZigBee packets that appear invalid are automatically dropped by the stack.
+     * A counter will be incremented when this occurs.
+     */
+    PACKET_VALIDATE_LIBRARY_POLICY = 7,
+    /** Controls whether the stack will process ZLL messages. */
+    ZLL_POLICY = 8,
+    /**
+     * Controls whether Trust Center (insecure) rejoins for devices using the well-known link key are accepted.
+     * If rejoining using the well-known key is allowed,
+     * it is disabled again after sli_zigbee_allow_tc_rejoins_using_well_known_key_timeout_sec seconds.
+     */
+    TC_REJOINS_USING_WELL_KNOWN_KEY_POLICY = 9
+}
+/** Identifies a value. */
+export declare enum EzspValueId {
+    /** The contents of the node data stack token. */
+    TOKEN_STACK_NODE_DATA = 0,
+    /** The types of MAC passthrough messages that the host wishes to receive. */
+    MAC_PASSTHROUGH_FLAGS = 1,
+    /**
+     * The source address used to filter legacy EmberNet messages when the
+     * EMBER_MAC_PASSTHROUGH_EMBERNET_SOURCE flag is set in MAC_PASSTHROUGH_FLAGS.
+     */
+    EMBERNET_PASSTHROUGH_SOURCE_ADDRESS = 2,
+    /** The number of available internal RAM general purpose buffers. Read only. */
+    FREE_BUFFERS = 3,
+    /** Selects sending synchronous callbacks in ezsp-uart. */
+    UART_SYNCH_CALLBACKS = 4,
+    /**
+     * The maximum incoming transfer size for the local node.
+     * Default value is set to 82 and does not use fragmentation. Sets the value in Node Descriptor.
+     * To set, this takes the input of a uint8 array of length 2 where you pass the lower byte at index 0 and upper byte at index 1.
+     */
+    MAXIMUM_INCOMING_TRANSFER_SIZE = 5,
+    /**
+     * The maximum outgoing transfer size for the local node.
+     * Default value is set to 82 and does not use fragmentation. Sets the value in Node Descriptor.
+     * To set, this takes the input of a uint8 array of length 2 where you pass the lower byte at index 0 and upper byte at index 1.
+     */
+    MAXIMUM_OUTGOING_TRANSFER_SIZE = 6,
+    /** A bool indicating whether stack tokens are written to persistent storage as they change. */
+    STACK_TOKEN_WRITING = 7,
+    /** A read-only value indicating whether the stack is currently performing a rejoin. */
+    STACK_IS_PERFORMING_REJOIN = 8,
+    /** A list of EmberMacFilterMatchData values. */
+    MAC_FILTER_LIST = 9,
+    /** The Ember Extended Security Bitmask. */
+    EXTENDED_SECURITY_BITMASK = 10,
+    /** The node short ID. */
+    NODE_SHORT_ID = 11,
+    /** The descriptor capability of the local node. Write only. */
+    DESCRIPTOR_CAPABILITY = 12,
+    /** The stack device request sequence number of the local node. */
+    STACK_DEVICE_REQUEST_SEQUENCE_NUMBER = 13,
+    /** Enable or disable radio hold-off. */
+    RADIO_HOLD_OFF = 14,
+    /** The flags field associated with the endpoint data. */
+    ENDPOINT_FLAGS = 15,
+    /** Enable/disable the Mfg security config key settings. */
+    MFG_SECURITY_CONFIG = 16,
+    /** Retrieves the version information from the stack on the NCP. */
+    VERSION_INFO = 17,
+    /**
+     * This will get/set the rejoin reason noted by the host for a subsequent call to emberFindAndRejoinNetwork().
+     * After a call to emberFindAndRejoinNetwork() the host's rejoin reason will be set to EMBER_REJOIN_REASON_NONE.
+     * The NCP will store the rejoin reason used by the call to emberFindAndRejoinNetwork().
+     * Application is not required to do anything with this value.
+     * The App Framework sets this for cases of emberFindAndRejoinNetwork that it initiates, but if the app is invoking a rejoin directly,
+     * it should/can set this value to aid in debugging of any rejoin state machine issues over EZSP logs after the fact.
+     * The NCP doesn't do anything with this value other than cache it so you can read it later.
+     */
+    NEXT_HOST_REJOIN_REASON = 18,
+    /**
+     * This is the reason that the last rejoin took place. This value may only be retrieved, not set.
+     * The rejoin may have been initiated by the stack (NCP) or the application (host).
+     * If a host initiated a rejoin the reason will be set by default to EMBER_REJOIN_DUE_TO_APP_EVENT_1.
+     * If the application wishes to denote its own rejoin reasons it can do so by calling
+     * ezspSetValue(EMBER_VALUE_HOST_REJOIN_REASON, EMBER_REJOIN_DUE_TO_APP_EVENT_X).
+     * X is a number corresponding to one of the app events defined.
+     * If the NCP initiated a rejoin it will record this value internally for retrieval by ezspGetValue(REAL_REJOIN_REASON).
+     */
+    LAST_REJOIN_REASON = 19,
+    /** The next ZigBee sequence number. */
+    NEXT_ZIGBEE_SEQUENCE_NUMBER = 20,
+    /** CCA energy detect threshold for radio. */
+    CCA_THRESHOLD = 21,
+    /** The threshold value for a counter */
+    SET_COUNTER_THRESHOLD = 23,
+    /** Resets all counters thresholds to 0xFF */
+    RESET_COUNTER_THRESHOLDS = 24,
+    /** Clears all the counters */
+    CLEAR_COUNTERS = 25,
+    /** The node's new certificate signed by the CA. */
+    CERTIFICATE_283K1 = 26,
+    /** The Certificate Authority's public key. */
+    PUBLIC_KEY_283K1 = 27,
+    /** The node's new static private key. */
+    PRIVATE_KEY_283K1 = 28,
+    /** The NWK layer security frame counter value */
+    NWK_FRAME_COUNTER = 35,
+    /** The APS layer security frame counter value. Managed by the stack. Users should not set these unless doing backup and restore. */
+    APS_FRAME_COUNTER = 36,
+    /** Sets the device type to use on the next rejoin using device type */
+    RETRY_DEVICE_TYPE = 37,
+    /** Setting this byte enables R21 behavior on the NCP. */
+    ENABLE_R21_BEHAVIOR = 41,
+    /** Configure the antenna mode(0-don't switch,1-primary,2-secondary,3-TX antenna diversity). */
+    ANTENNA_MODE = 48,
+    /** Enable or disable packet traffic arbitration. */
+    ENABLE_PTA = 49,
+    /** Set packet traffic arbitration configuration options. */
+    PTA_OPTIONS = 50,
+    /** Configure manufacturing library options (0-non-CSMA transmits,1-CSMA transmits). To be used with Manufacturing Library. */
+    MFGLIB_OPTIONS = 51,
+    /**
+     * Sets the flag to use either negotiated power by link power delta (LPD) or fixed power value provided by user
+     * while forming/joining a network for packet transmissions on sub-ghz interface. This is mainly for testing purposes.
+     */
+    USE_NEGOTIATED_POWER_BY_LPD = 52,
+    /** Set packet traffic arbitration PWM options. */
+    PTA_PWM_OPTIONS = 53,
+    /** Set packet traffic arbitration directional priority pulse width in microseconds. */
+    PTA_DIRECTIONAL_PRIORITY_PULSE_WIDTH = 54,
+    /** Set packet traffic arbitration phy select timeout(ms). */
+    PTA_PHY_SELECT_TIMEOUT = 55,
+    /** Configure the RX antenna mode: (0-do not switch; 1-primary; 2-secondary; 3-RX antenna diversity). */
+    ANTENNA_RX_MODE = 56,
+    /** Configure the timeout to wait for the network key before failing a join. Acceptable timeout range [3,255]. Value is in seconds. */
+    NWK_KEY_TIMEOUT = 57,
+    /**
+     * The number of failed CSMA attempts due to failed CCA made by the MAC before continuing transmission with CCA disabled.
+     * This is the same as calling the emberForceTxAfterFailedCca(uint8_t csmaAttempts) API. A value of 0 disables the feature.
+     */
+    FORCE_TX_AFTER_FAILED_CCA_ATTEMPTS = 58,
+    /**
+     * The length of time, in seconds, that a trust center will store a transient link key that a device can use to join its network.
+     * A transient key is added with a call to sl_zb_sec_man_import_transient_key. After the transient key is added,
+     * it will be removed once this amount of time has passed. A joining device will not be able to use that key to join
+     * until it is added again on the trust center.
+     * The default value is 300 seconds (5 minutes).
+     */
+    TRANSIENT_KEY_TIMEOUT_S = 59,
+    /** Cumulative energy usage metric since the last value reset of the coulomb counter plugin. Setting this value will reset the coulomb counter. */
+    COULOMB_COUNTER_USAGE = 60,
+    /** When scanning, configure the maximum number of beacons to store in cache. Each beacon consumes one packet buffer in RAM. */
+    MAX_BEACONS_TO_STORE = 61,
+    /** Set the mask to filter out unacceptable child timeout options on a router. */
+    END_DEVICE_TIMEOUT_OPTIONS_MASK = 62,
+    /** The end device keep-alive mode supported by the parent. */
+    END_DEVICE_KEEP_ALIVE_SUPPORT_MODE = 63,
+    /**
+     * Return the active radio config. Read only.
+     * Values are 0: Default, 1: Antenna Diversity, 2: Co-Existence, 3: Antenna Diversity and Co-Existence.
+     */
+    ACTIVE_RADIO_CONFIG = 65,
+    /** Return the number of seconds the network will remain open. A return value of 0 indicates that the network is closed. Read only. */
+    NWK_OPEN_DURATION = 66,
+    /**
+     * Timeout in milliseconds to store entries in the transient device table.
+     * If the devices are not authenticated before the timeout, the entry shall be purged
+     */
+    TRANSIENT_DEVICE_TIMEOUT = 67,
+    /**
+     * Return information about the key storage on an NCP.
+     * Returns 0 if keys are in classic key storage, and 1 if they are located in PSA key storage. Read only.
+     */
+    KEY_STORAGE_VERSION = 68,
+    /** Return activation state about TC Delayed Join on an NCP.  A return value of 0 indicates that the feature is not activated. */
+    DELAYED_JOIN_ACTIVATION = 69
+}
+/**
+ * Identifies a value based on specified characteristics.
+ * Each set of characteristics is unique to that value and is specified during the call to get the extended value.
+ *
+ * uint16_t
+ */
+export declare enum EzspExtendedValueId {
+    /** The flags field associated with the specified endpoint. Value is uint16_t */
+    ENDPOINT_FLAGS = 0,
+    /**
+     * This is the reason for the node to leave the network as well as the device that told it to leave.
+     * The leave reason is the 1st byte of the value while the node ID is the 2nd and 3rd byte.
+     * If the leave was caused due to an API call rather than an over the air message, the node ID will be EMBER_UNKNOWN_NODE_ID (0xFFFD).
+     */
+    LAST_LEAVE_REASON = 1,
+    /** This number of bytes of overhead required in the network frame for source routing to a particular destination. */
+    GET_SOURCE_ROUTE_OVERHEAD = 2
+}
+/** Flags associated with the endpoint data configured on the NCP. */
+export declare enum EzspEndpointFlag {
+    /** Indicates that the endpoint is disabled and NOT discoverable via ZDO. */
+    DISABLED = 0,
+    /** Indicates that the endpoint is enabled and discoverable via ZDO. */
+    ENABLED = 1
+}
+/** Notes the last leave reason. uint8_t */
+export declare enum EmberLeaveReason {
+    REASON_NONE = 0,
+    DUE_TO_NWK_LEAVE_MESSAGE = 1,
+    DUE_TO_APS_REMOVE_MESSAGE = 2,
+    DUE_TO_ZDO_LEAVE_MESSAGE = 3,
+    DUE_TO_ZLL_TOUCHLINK = 4,
+    DUE_TO_APP_EVENT_1 = 255
+}
+/** Notes the last rejoin reason. uint8_t */
+export declare enum EmberRejoinReason {
+    REASON_NONE = 0,
+    DUE_TO_NWK_KEY_UPDATE = 1,
+    DUE_TO_LEAVE_MESSAGE = 2,
+    DUE_TO_NO_PARENT = 3,
+    DUE_TO_ZLL_TOUCHLINK = 4,
+    DUE_TO_END_DEVICE_REBOOT = 5,
+    DUE_TO_APP_EVENT_5 = 251,
+    DUE_TO_APP_EVENT_4 = 252,
+    DUE_TO_APP_EVENT_3 = 253,
+    DUE_TO_APP_EVENT_2 = 254,
+    DUE_TO_APP_EVENT_1 = 255
+}
+/** Manufacturing token IDs used by ezspGetMfgToken(). */
+export declare enum EzspMfgTokenId {
+    /** Custom version (2 bytes). */
+    CUSTOM_VERSION = 0,
+    /** Manufacturing string (16 bytes). */
+    STRING = 1,
+    /** Board name (16 bytes). */
+    BOARD_NAME = 2,
+    /** Manufacturing ID (2 bytes). */
+    MANUF_ID = 3,
+    /** Radio configuration (2 bytes). */
+    PHY_CONFIG = 4,
+    /** Bootload AES key (16 bytes). */
+    BOOTLOAD_AES_KEY = 5,
+    /** ASH configuration (40 bytes). */
+    ASH_CONFIG = 6,
+    /** EZSP storage (8 bytes). */
+    EZSP_STORAGE = 7,
+    /**
+     * Radio calibration data (64 bytes). 4 bytes are stored for each of the 16 channels.
+     * This token is not stored in the Flash Information Area. It is updated by the stack each time a calibration is performed.
+     */
+    STACK_CAL_DATA = 8,
+    /** Certificate Based Key Exchange (CBKE) data (92 bytes). */
+    CBKE_DATA = 9,
+    /** Installation code (20 bytes). */
+    INSTALLATION_CODE = 10,
+    /**
+     * Radio channel filter calibration data (1 byte).
+     * This token is not stored in the Flash Information Area. It is updated by the stack each time a calibration is performed.
+     */
+    STACK_CAL_FILTER = 11,
+    /** Custom EUI64 MAC address (8 bytes). */
+    CUSTOM_EUI_64 = 12,
+    /** CTUNE value (2 byte). */
+    CTUNE = 13
+}
+export declare enum EzspSleepMode {
+    /** Processor idle. */
+    IDLE = 0,
+    /** Wake on interrupt or timer. */
+    DEEP_SLEEP = 1,
+    /** Wake on interrupt only. */
+    POWER_DOWN = 2,
+    /** Reserved */
+    RESERVED_SLEEP = 3
+}
+//# sourceMappingURL=enums.d.ts.map