@willieee802/zigbee-herdsman 0.18.2 → 0.18.3

package/dist/adapter/zigate/driver/messageType.js

@@ -1,279 +1,279 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.ZiGateMessage = void 0;
-/* istanbul ignore file */
-/* eslint-disable */
-const constants_1 = require("./constants");
-exports.ZiGateMessage = {
-    [constants_1.ZiGateMessageCode.GetTimeServer]: {
-        response: [
-            { name: 'timestampUTC', parameterType: 'UINT32' }, // <Timestamp UTC: uint32_t> from 2000-01-01 00:00:00
-        ]
-    },
-    [constants_1.ZiGateMessageCode.DeviceAnnounce]: {
-        response: [
-            { name: 'shortAddress', parameterType: 'UINT16BE' },
-            { name: 'ieee', parameterType: 'IEEEADDR' },
-            { name: 'MACcapability', parameterType: 'MACCAPABILITY' },
-            // MAC capability
-            // Bit 0 – Alternate PAN Coordinator
-            // Bit 1 – Device Type
-            // Bit 2 – Power source
-            // Bit 3 – Receiver On when Idle
-            // Bit 4,5 – Reserved
-            // Bit 6 – Security capability
-            // Bit 7 – Allocate Address
-            // {name: 'rejoin', parameterType: 'UINT8'},
-        ]
-    },
-    [constants_1.ZiGateMessageCode.Status]: {
-        response: [
-            { name: 'status', parameterType: 'UINT8' },
-            // 0 = Success
-            // 1 = Incorrect parameters
-            // 2 = Unhandled command
-            // 3 = Command failed
-            // eslint-disable-next-line max-len
-            // 4 = Busy (Node is carrying out a lengthy operation and is currently unable to handle the incoming command)
-            // 5 = Stack already started (no new configuration accepted)
-            // 128 – 244 = Failed (ZigBee event codes)
-            // Packet Type: The value of the initiating command request.
-            { name: 'sequence', parameterType: 'UINT8' },
-            { name: 'packetType', parameterType: 'UINT16BE' }, // <Packet Type: uint16_t>
-            // from 3.1d
-            // {name: 'requestSent', parameterType: 'MAYBE_UINT8'},// <requestSent: uint8_t>  - 1 if a request been sent to
-            // // a device(aps ack/nack 8011 should be expected) , 0 otherwise
-            // {name: 'seqApsNum', parameterType: 'MAYBE_UINT8'},// <seqApsNum: uint8_t>  - sqn of the APS layer - used to
-            // // check sqn sent back in aps ack
-            //
-            // // from 3.1e
-            // {name: 'PDUM_u8GetNpduUse', parameterType: 'MAYBE_UINT8'},
-            // {name: 'u8GetApduUse', parameterType: 'MAYBE_UINT8'},
-            //
-            // // debug 3.1e++
-            // {name: 'PDUM_u8GetMaxNpduUse', parameterType: 'MAYBE_UINT8'},
-            // {name: 'u8GetMaxApduUse', parameterType: 'MAYBE_UINT8'},
-        ]
-    },
-    [constants_1.ZiGateMessageCode.PermitJoinStatus]: {
-        response: [
-            { name: 'status', parameterType: 'UINT8' }, // <status:uint8_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.DataIndication]: {
-        response: [
-            { name: 'status', parameterType: 'UINT8' },
-            { name: 'profileID', parameterType: 'UINT16BE' },
-            { name: 'clusterID', parameterType: 'UINT16BE' },
-            { name: 'sourceEndpoint', parameterType: 'UINT8' },
-            { name: 'destinationEndpoint', parameterType: 'UINT8' },
-            { name: 'sourceAddressMode', parameterType: 'UINT8' },
-            { name: 'sourceAddress', parameterType: 'ADDRESS_WITH_TYPE_DEPENDENCY' },
-            // <source address: uint16_t or uint64_t>
-            { name: 'destinationAddressMode', parameterType: 'UINT8' },
-            // <destination address mode: uint8_t>
-            { name: 'destinationAddress', parameterType: 'ADDRESS_WITH_TYPE_DEPENDENCY' },
-            // <destination address: uint16_t or uint64_t>
-            // {name: 'payloadSize', parameterType:'UINT8'}, // <payload size : uint8_t>
-            { name: 'payload', parameterType: 'BUFFER_RAW' }, // <payload : data each element is
-            // uint8_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.NodeClusterList]: {
-        response: [
-            { name: 'sourceEndpoint', parameterType: 'UINT8' },
-            { name: 'profileID', parameterType: 'UINT16' },
-            { name: 'clusterCount', parameterType: 'UINT8' },
-            { name: 'clusterList', parameterType: 'LIST_UINT16' }, // <cluster list: data each entry is uint16_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.NodeAttributeList]: {
-        response: [
-            { name: 'sourceEndpoint', parameterType: 'UINT8' },
-            { name: 'profileID', parameterType: 'UINT16' },
-            { name: 'clusterID', parameterType: 'UINT16' },
-            { name: 'attributeCount', parameterType: 'UINT8' },
-            { name: 'attributeList', parameterType: 'LIST_UINT16' }, //  <attribute list: data each entry is uint16_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.NodeCommandIDList]: {
-        response: [
-            { name: 'sourceEndpoint', parameterType: 'UINT8' },
-            { name: 'profileID', parameterType: 'UINT16' },
-            { name: 'clusterID', parameterType: 'UINT16' },
-            { name: 'commandIDCount', parameterType: 'UINT8' },
-            { name: 'commandIDList', parameterType: 'LIST_UINT8' }, // <command ID list:data each entry is uint8_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.APSDataACK]: {
-        response: [
-            { name: 'status', parameterType: 'UINT8' },
-            // {name: 'sourceEndpoint', parameterType:'UINT8'}, // <source endpoint: uint8_t>
-            // {name: 'destinationAddressMode', parameterType:'UINT8'},
-            // // <destination address mode: uint8_t>
-            { name: 'destinationAddress', parameterType: 'UINT16BE' },
-            { name: 'destinationEndpoint', parameterType: 'UINT8' },
-            { name: 'clusterID', parameterType: 'UINT16BE' },
-            // // <destination address: uint16_t or uint64_t>
-            { name: 'seqNumber', parameterType: 'UINT8' }, // <seq number: uint8_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.APSDataConfirm]: {
-        response: [
-            { name: 'status', parameterType: 'UINT8' },
-            { name: 'sourceEndpoint', parameterType: 'UINT8' },
-            { name: 'destinationAddressMode', parameterType: 'UINT8' },
-            { name: 'destinationAddressMode', parameterType: 'UINT8' },
-            // <destination address mode: uint8_t>
-            { name: 'destinationAddress', parameterType: 'ADDRESS_WITH_TYPE_DEPENDENCY' },
-            // <destination address: uint16_t or uint64_t>
-            { name: 'seqNumber', parameterType: 'UINT8' },
-            // from 3.1e
-            { name: 'PDUM_u8GetNpduUse', parameterType: 'MAYBE_UINT8' },
-            { name: 'u8GetApduUse', parameterType: 'MAYBE_UINT8' },
-        ]
-    },
-    [constants_1.ZiGateMessageCode.APSDataConfirmFailed]: {
-        response: [
-            { name: 'status', parameterType: 'UINT8' },
-            { name: 'sourceEndpoint', parameterType: 'UINT8' },
-            { name: 'destinationEndpoint', parameterType: 'UINT8' },
-            { name: 'destinationAddressMode', parameterType: 'UINT8' },
-            { name: 'destinationAddress', parameterType: 'ADDRESS_WITH_TYPE_DEPENDENCY' },
-            // <destination address: uint64_t>
-            { name: 'seqNumber', parameterType: 'UINT8' },
-            // from 3.1e
-            { name: 'PDUM_u8GetNpduUse', parameterType: 'MAYBE_UINT8' },
-            { name: 'u8GetApduUse', parameterType: 'MAYBE_UINT8' },
-        ]
-    },
-    [constants_1.ZiGateMessageCode.NetworkState]: {
-        response: [
-            { name: 'shortAddress', parameterType: 'UINT16BE' },
-            { name: 'extendedAddress', parameterType: 'IEEEADDR' },
-            { name: 'PANID', parameterType: 'UINT16BE' },
-            { name: 'ExtPANID', parameterType: 'IEEEADDR' },
-            { name: 'Channel', parameterType: 'UINT8' }, // <Channel: uint8_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.VersionList]: {
-        response: [
-            { name: 'major', parameterType: 'UINT8' },
-            { name: 'minor', parameterType: 'UINT8' },
-            { name: 'revision', parameterType: 'UINT16' },
-        ]
-    },
-    [constants_1.ZiGateMessageCode.NetworkJoined]: {
-        response: [
-            { name: 'status', parameterType: 'UINT8' },
-            // Status:
-            // 0 = Joined existing network
-            // 1 = Formed new network
-            // 128 – 244 = Failed (ZigBee event codes)
-            { name: 'shortAddress', parameterType: 'UINT16BE' }, // <short address: uint16_t>
-            // {name: 'extendedAddress', parameterType: 'IEEEADDR'}, // <extended address:uint64_t>
-            // {name: 'channel', parameterType: 'UINT8'}, // <channel: uint8_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.LeaveIndication]: {
-        response: [
-            { name: 'extendedAddress', parameterType: 'IEEEADDR' },
-            { name: 'rejoin', parameterType: 'UINT8' }, // <rejoin status: uint8_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.ManagementLeaveResponse]: {
-        response: [
-            { name: 'sqn', parameterType: 'UINT8' },
-            { name: 'status', parameterType: 'UINT8' }, // <status: uint8_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.RouterDiscoveryConfirm]: {
-        response: [
-            { name: 'status', parameterType: 'UINT8' }, // <status: uint8_t>
-            // {name: 'nwkStatus', parameterType: 'UINT8'}, // <nwk status: uint8_t>
-            // {name: 'dstAddress', parameterType: 'UINT16BE'}, // <nwk status: uint16_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.SimpleDescriptorResponse]: {
-        response: [
-            { name: 'sourceEndpoint', parameterType: 'UINT8' },
-            { name: 'profile ID', parameterType: 'UINT16BE' },
-            { name: 'clusterID', parameterType: 'UINT16BE' },
-            { name: 'attributeList', parameterType: 'LIST_UINT16BE' }, // <attribute list: data each entry is uint16_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.ManagementLQIResponse]: {
-        response: [
-            { name: 'sequence', parameterType: 'UINT8' },
-            { name: 'status', parameterType: 'UINT8' },
-            { name: 'neighbourTableEntries', parameterType: 'UINT8' },
-            { name: 'neighbourTableListCount', parameterType: 'UINT8' },
-            { name: 'startIndex', parameterType: 'UINT8' },
-            // @TODO list TYPE
-            // <List of Entries elements described below :>
-            // Note: If Neighbour Table list count is 0, there are no elements in the list.
-            { name: 'NWKAddress', parameterType: 'UINT16BE' },
-            { name: 'Extended PAN ID', parameterType: 'UINT64' },
-            { name: 'IEEE Address', parameterType: 'IEEEADR' },
-            { name: 'Depth', parameterType: 'UINT8' },
-            { name: 'linkQuality', parameterType: 'UINT8' },
-            { name: 'bitMap', parameterType: 'UINT8' },
-            // bit 0-1 Device Type
-            // (0-Coordinator 1-Router 2-End Device)
-            // bit 2-3 Permit Join status
-            // (1- On 0-Off)
-            // bit 4-5 Relationship
-            // (0-Parent 1-Child 2-Sibling)
-            // bit 6-7 Rx On When Idle status
-            // (1-On 0-Off)
-            { name: 'srcAddress', parameterType: 'UINT16BE' }, // <Src Address : uint16_t> ( only from v3.1a)
-        ]
-    },
-    [constants_1.ZiGateMessageCode.PDMEvent]: {
-        response: [
-            { name: 'eventStatus', parameterType: 'UINT8' },
-            { name: 'recordID', parameterType: 'UINT32BE' }, // <record ID: uint32_t>
-        ]
-    },
-    [constants_1.ZiGateMessageCode.PDMLoaded]: {
-        response: [
-            { name: 'length', parameterType: 'UINT8' },
-        ]
-    },
-    [constants_1.ZiGateMessageCode.RestartNonFactoryNew]: {
-        response: [
-            { name: 'status', parameterType: 'UINT8' }, // <status: uint8_t>
-            //	0 – STARTUP
-            // 1 – RUNNING
-            // 2 – NFN_START
-        ]
-    },
-    [constants_1.ZiGateMessageCode.RestartFactoryNew]: {
-        response: [
-            { name: 'status', parameterType: 'UINT8' }, // <status: uint8_t>
-            // 0 – STARTUP
-            // 2 – NFN_START
-            // 6 – RUNNING
-            // The node is not yet provisioned.
-        ]
-    },
-    [constants_1.ZiGateMessageCode.ExtendedStatusCallBack]: {
-        response: [
-            { name: 'status', parameterType: 'UINT8' },
-            // https://github.com/fairecasoimeme/ZiGate/blob/aac14153db332eb5b898cba0f57f5999e5cf11eb/Module%20Radio/Firmware/src/sdk/JN-SW-4170/Components/ZPSNWK/Include/zps_nwk_pub.h#L89
-        ]
-    },
-    [0x8001]: {
-        response: [
-            { name: 'logLevel', parameterType: 'LOG_LEVEL' },
-            { name: 'log', parameterType: 'STRING' },
-        ]
-    },
-    [constants_1.ZiGateMessageCode.AddGroupResponse]: {
-        response: [
-            { name: 'status', parameterType: 'UINT16BE' },
-            { name: 'groupAddress', parameterType: 'UINT16BE' },
-        ]
-    }
-};
+"use strict";
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.ZiGateMessage = void 0;
+/* istanbul ignore file */
+/* eslint-disable */
+const constants_1 = require("./constants");
+exports.ZiGateMessage = {
+    [constants_1.ZiGateMessageCode.GetTimeServer]: {
+        response: [
+            { name: 'timestampUTC', parameterType: 'UINT32' }, // <Timestamp UTC: uint32_t> from 2000-01-01 00:00:00
+        ]
+    },
+    [constants_1.ZiGateMessageCode.DeviceAnnounce]: {
+        response: [
+            { name: 'shortAddress', parameterType: 'UINT16BE' },
+            { name: 'ieee', parameterType: 'IEEEADDR' },
+            { name: 'MACcapability', parameterType: 'MACCAPABILITY' },
+            // MAC capability
+            // Bit 0 – Alternate PAN Coordinator
+            // Bit 1 – Device Type
+            // Bit 2 – Power source
+            // Bit 3 – Receiver On when Idle
+            // Bit 4,5 – Reserved
+            // Bit 6 – Security capability
+            // Bit 7 – Allocate Address
+            // {name: 'rejoin', parameterType: 'UINT8'},
+        ]
+    },
+    [constants_1.ZiGateMessageCode.Status]: {
+        response: [
+            { name: 'status', parameterType: 'UINT8' },
+            // 0 = Success
+            // 1 = Incorrect parameters
+            // 2 = Unhandled command
+            // 3 = Command failed
+            // eslint-disable-next-line max-len
+            // 4 = Busy (Node is carrying out a lengthy operation and is currently unable to handle the incoming command)
+            // 5 = Stack already started (no new configuration accepted)
+            // 128 – 244 = Failed (ZigBee event codes)
+            // Packet Type: The value of the initiating command request.
+            { name: 'sequence', parameterType: 'UINT8' },
+            { name: 'packetType', parameterType: 'UINT16BE' }, // <Packet Type: uint16_t>
+            // from 3.1d
+            // {name: 'requestSent', parameterType: 'MAYBE_UINT8'},// <requestSent: uint8_t>  - 1 if a request been sent to
+            // // a device(aps ack/nack 8011 should be expected) , 0 otherwise
+            // {name: 'seqApsNum', parameterType: 'MAYBE_UINT8'},// <seqApsNum: uint8_t>  - sqn of the APS layer - used to
+            // // check sqn sent back in aps ack
+            //
+            // // from 3.1e
+            // {name: 'PDUM_u8GetNpduUse', parameterType: 'MAYBE_UINT8'},
+            // {name: 'u8GetApduUse', parameterType: 'MAYBE_UINT8'},
+            //
+            // // debug 3.1e++
+            // {name: 'PDUM_u8GetMaxNpduUse', parameterType: 'MAYBE_UINT8'},
+            // {name: 'u8GetMaxApduUse', parameterType: 'MAYBE_UINT8'},
+        ]
+    },
+    [constants_1.ZiGateMessageCode.PermitJoinStatus]: {
+        response: [
+            { name: 'status', parameterType: 'UINT8' }, // <status:uint8_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.DataIndication]: {
+        response: [
+            { name: 'status', parameterType: 'UINT8' },
+            { name: 'profileID', parameterType: 'UINT16BE' },
+            { name: 'clusterID', parameterType: 'UINT16BE' },
+            { name: 'sourceEndpoint', parameterType: 'UINT8' },
+            { name: 'destinationEndpoint', parameterType: 'UINT8' },
+            { name: 'sourceAddressMode', parameterType: 'UINT8' },
+            { name: 'sourceAddress', parameterType: 'ADDRESS_WITH_TYPE_DEPENDENCY' },
+            // <source address: uint16_t or uint64_t>
+            { name: 'destinationAddressMode', parameterType: 'UINT8' },
+            // <destination address mode: uint8_t>
+            { name: 'destinationAddress', parameterType: 'ADDRESS_WITH_TYPE_DEPENDENCY' },
+            // <destination address: uint16_t or uint64_t>
+            // {name: 'payloadSize', parameterType:'UINT8'}, // <payload size : uint8_t>
+            { name: 'payload', parameterType: 'BUFFER_RAW' }, // <payload : data each element is
+            // uint8_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.NodeClusterList]: {
+        response: [
+            { name: 'sourceEndpoint', parameterType: 'UINT8' },
+            { name: 'profileID', parameterType: 'UINT16' },
+            { name: 'clusterCount', parameterType: 'UINT8' },
+            { name: 'clusterList', parameterType: 'LIST_UINT16' }, // <cluster list: data each entry is uint16_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.NodeAttributeList]: {
+        response: [
+            { name: 'sourceEndpoint', parameterType: 'UINT8' },
+            { name: 'profileID', parameterType: 'UINT16' },
+            { name: 'clusterID', parameterType: 'UINT16' },
+            { name: 'attributeCount', parameterType: 'UINT8' },
+            { name: 'attributeList', parameterType: 'LIST_UINT16' }, //  <attribute list: data each entry is uint16_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.NodeCommandIDList]: {
+        response: [
+            { name: 'sourceEndpoint', parameterType: 'UINT8' },
+            { name: 'profileID', parameterType: 'UINT16' },
+            { name: 'clusterID', parameterType: 'UINT16' },
+            { name: 'commandIDCount', parameterType: 'UINT8' },
+            { name: 'commandIDList', parameterType: 'LIST_UINT8' }, // <command ID list:data each entry is uint8_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.APSDataACK]: {
+        response: [
+            { name: 'status', parameterType: 'UINT8' },
+            // {name: 'sourceEndpoint', parameterType:'UINT8'}, // <source endpoint: uint8_t>
+            // {name: 'destinationAddressMode', parameterType:'UINT8'},
+            // // <destination address mode: uint8_t>
+            { name: 'destinationAddress', parameterType: 'UINT16BE' },
+            { name: 'destinationEndpoint', parameterType: 'UINT8' },
+            { name: 'clusterID', parameterType: 'UINT16BE' },
+            // // <destination address: uint16_t or uint64_t>
+            { name: 'seqNumber', parameterType: 'UINT8' }, // <seq number: uint8_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.APSDataConfirm]: {
+        response: [
+            { name: 'status', parameterType: 'UINT8' },
+            { name: 'sourceEndpoint', parameterType: 'UINT8' },
+            { name: 'destinationAddressMode', parameterType: 'UINT8' },
+            { name: 'destinationAddressMode', parameterType: 'UINT8' },
+            // <destination address mode: uint8_t>
+            { name: 'destinationAddress', parameterType: 'ADDRESS_WITH_TYPE_DEPENDENCY' },
+            // <destination address: uint16_t or uint64_t>
+            { name: 'seqNumber', parameterType: 'UINT8' },
+            // from 3.1e
+            { name: 'PDUM_u8GetNpduUse', parameterType: 'MAYBE_UINT8' },
+            { name: 'u8GetApduUse', parameterType: 'MAYBE_UINT8' },
+        ]
+    },
+    [constants_1.ZiGateMessageCode.APSDataConfirmFailed]: {
+        response: [
+            { name: 'status', parameterType: 'UINT8' },
+            { name: 'sourceEndpoint', parameterType: 'UINT8' },
+            { name: 'destinationEndpoint', parameterType: 'UINT8' },
+            { name: 'destinationAddressMode', parameterType: 'UINT8' },
+            { name: 'destinationAddress', parameterType: 'ADDRESS_WITH_TYPE_DEPENDENCY' },
+            // <destination address: uint64_t>
+            { name: 'seqNumber', parameterType: 'UINT8' },
+            // from 3.1e
+            { name: 'PDUM_u8GetNpduUse', parameterType: 'MAYBE_UINT8' },
+            { name: 'u8GetApduUse', parameterType: 'MAYBE_UINT8' },
+        ]
+    },
+    [constants_1.ZiGateMessageCode.NetworkState]: {
+        response: [
+            { name: 'shortAddress', parameterType: 'UINT16BE' },
+            { name: 'extendedAddress', parameterType: 'IEEEADDR' },
+            { name: 'PANID', parameterType: 'UINT16BE' },
+            { name: 'ExtPANID', parameterType: 'IEEEADDR' },
+            { name: 'Channel', parameterType: 'UINT8' }, // <Channel: uint8_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.VersionList]: {
+        response: [
+            { name: 'major', parameterType: 'UINT8' },
+            { name: 'minor', parameterType: 'UINT8' },
+            { name: 'revision', parameterType: 'UINT16' },
+        ]
+    },
+    [constants_1.ZiGateMessageCode.NetworkJoined]: {
+        response: [
+            { name: 'status', parameterType: 'UINT8' },
+            // Status:
+            // 0 = Joined existing network
+            // 1 = Formed new network
+            // 128 – 244 = Failed (ZigBee event codes)
+            { name: 'shortAddress', parameterType: 'UINT16BE' }, // <short address: uint16_t>
+            // {name: 'extendedAddress', parameterType: 'IEEEADDR'}, // <extended address:uint64_t>
+            // {name: 'channel', parameterType: 'UINT8'}, // <channel: uint8_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.LeaveIndication]: {
+        response: [
+            { name: 'extendedAddress', parameterType: 'IEEEADDR' },
+            { name: 'rejoin', parameterType: 'UINT8' }, // <rejoin status: uint8_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.ManagementLeaveResponse]: {
+        response: [
+            { name: 'sqn', parameterType: 'UINT8' },
+            { name: 'status', parameterType: 'UINT8' }, // <status: uint8_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.RouterDiscoveryConfirm]: {
+        response: [
+            { name: 'status', parameterType: 'UINT8' }, // <status: uint8_t>
+            // {name: 'nwkStatus', parameterType: 'UINT8'}, // <nwk status: uint8_t>
+            // {name: 'dstAddress', parameterType: 'UINT16BE'}, // <nwk status: uint16_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.SimpleDescriptorResponse]: {
+        response: [
+            { name: 'sourceEndpoint', parameterType: 'UINT8' },
+            { name: 'profile ID', parameterType: 'UINT16BE' },
+            { name: 'clusterID', parameterType: 'UINT16BE' },
+            { name: 'attributeList', parameterType: 'LIST_UINT16BE' }, // <attribute list: data each entry is uint16_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.ManagementLQIResponse]: {
+        response: [
+            { name: 'sequence', parameterType: 'UINT8' },
+            { name: 'status', parameterType: 'UINT8' },
+            { name: 'neighbourTableEntries', parameterType: 'UINT8' },
+            { name: 'neighbourTableListCount', parameterType: 'UINT8' },
+            { name: 'startIndex', parameterType: 'UINT8' },
+            // @TODO list TYPE
+            // <List of Entries elements described below :>
+            // Note: If Neighbour Table list count is 0, there are no elements in the list.
+            { name: 'NWKAddress', parameterType: 'UINT16BE' },
+            { name: 'Extended PAN ID', parameterType: 'UINT64' },
+            { name: 'IEEE Address', parameterType: 'IEEEADR' },
+            { name: 'Depth', parameterType: 'UINT8' },
+            { name: 'linkQuality', parameterType: 'UINT8' },
+            { name: 'bitMap', parameterType: 'UINT8' },
+            // bit 0-1 Device Type
+            // (0-Coordinator 1-Router 2-End Device)
+            // bit 2-3 Permit Join status
+            // (1- On 0-Off)
+            // bit 4-5 Relationship
+            // (0-Parent 1-Child 2-Sibling)
+            // bit 6-7 Rx On When Idle status
+            // (1-On 0-Off)
+            { name: 'srcAddress', parameterType: 'UINT16BE' }, // <Src Address : uint16_t> ( only from v3.1a)
+        ]
+    },
+    [constants_1.ZiGateMessageCode.PDMEvent]: {
+        response: [
+            { name: 'eventStatus', parameterType: 'UINT8' },
+            { name: 'recordID', parameterType: 'UINT32BE' }, // <record ID: uint32_t>
+        ]
+    },
+    [constants_1.ZiGateMessageCode.PDMLoaded]: {
+        response: [
+            { name: 'length', parameterType: 'UINT8' },
+        ]
+    },
+    [constants_1.ZiGateMessageCode.RestartNonFactoryNew]: {
+        response: [
+            { name: 'status', parameterType: 'UINT8' }, // <status: uint8_t>
+            //	0 – STARTUP
+            // 1 – RUNNING
+            // 2 – NFN_START
+        ]
+    },
+    [constants_1.ZiGateMessageCode.RestartFactoryNew]: {
+        response: [
+            { name: 'status', parameterType: 'UINT8' }, // <status: uint8_t>
+            // 0 – STARTUP
+            // 2 – NFN_START
+            // 6 – RUNNING
+            // The node is not yet provisioned.
+        ]
+    },
+    [constants_1.ZiGateMessageCode.ExtendedStatusCallBack]: {
+        response: [
+            { name: 'status', parameterType: 'UINT8' },
+            // https://github.com/fairecasoimeme/ZiGate/blob/aac14153db332eb5b898cba0f57f5999e5cf11eb/Module%20Radio/Firmware/src/sdk/JN-SW-4170/Components/ZPSNWK/Include/zps_nwk_pub.h#L89
+        ]
+    },
+    [0x8001]: {
+        response: [
+            { name: 'logLevel', parameterType: 'LOG_LEVEL' },
+            { name: 'log', parameterType: 'STRING' },
+        ]
+    },
+    [constants_1.ZiGateMessageCode.AddGroupResponse]: {
+        response: [
+            { name: 'status', parameterType: 'UINT16BE' },
+            { name: 'groupAddress', parameterType: 'UINT16BE' },
+        ]
+    }
+};
 //# sourceMappingURL=messageType.js.map

package/dist/adapter/zigate/driver/parameterType.d.ts

@@ -1,21 +1,21 @@
-declare enum ParameterType {
-    UINT8 = 0,
-    UINT16 = 1,
-    UINT32 = 2,
-    IEEEADDR = 3,
-    BUFFER = 4,
-    BUFFER8 = 5,
-    BUFFER16 = 6,
-    BUFFER18 = 7,
-    BUFFER32 = 8,
-    BUFFER42 = 9,
-    BUFFER100 = 10,
-    LIST_UINT8 = 11,
-    LIST_UINT16 = 12,
-    INT8 = 18,
-    MACCAPABILITY = 100,
-    ADDRESS_WITH_TYPE_DEPENDENCY = 101,
-    RAW = 102
-}
-export default ParameterType;
+declare enum ParameterType {
+    UINT8 = 0,
+    UINT16 = 1,
+    UINT32 = 2,
+    IEEEADDR = 3,
+    BUFFER = 4,
+    BUFFER8 = 5,
+    BUFFER16 = 6,
+    BUFFER18 = 7,
+    BUFFER32 = 8,
+    BUFFER42 = 9,
+    BUFFER100 = 10,
+    LIST_UINT8 = 11,
+    LIST_UINT16 = 12,
+    INT8 = 18,
+    MACCAPABILITY = 100,
+    ADDRESS_WITH_TYPE_DEPENDENCY = 101,
+    RAW = 102
+}
+export default ParameterType;
 //# sourceMappingURL=parameterType.d.ts.map