@willcgage/module-schematic 0.97.0 → 0.98.0

package/dist/index.d.cts

@@ -677,6 +677,12 @@ interface ModuleFootprintInput {
     /** A balloon / return loop — the centre-line turns back on itself, so its far
      * end is the THROAT, not an endplate; only endplate A's face is emitted (#loop). */
     loop?: boolean;
+    /**
+     * The document already places track along a main (see {@link
+     * moduleCenterline}). Set from the doc's own `tracks`; without it a module
+     * whose track was authored before it had a geometry draws as a bare board.
+     */
+    hasPlacedTrack?: boolean;
     /** Axial endplate configs (A first, then B), same as
      * {@link ModuleGeometryInput.endplateConfigs}. `"none"` at B means the module
      * presents no far endplate, so no face is emitted there (#184/#191). */
@@ -2744,6 +2750,35 @@ declare function snapPiece(moving: TrackPiece, others: TrackPiece[], library?: T
  * owner's curve to reach something is not a fit, it is a guess.
  */
 declare function fitFlexBetween(piece: TrackPiece, others: TrackPiece[], library?: TrackPart[], withinInches?: number): TrackPiece | null;
+/** A run cut in two to let a piece in. */
+interface RunInsertion {
+    /** The whole set: the host shortened, the new piece, and the remainder. */
+    pieces: TrackPiece[];
+    /** The run that was cut, and the piece that went into it. */
+    hostId: string;
+    insertedId: string;
+}
+/**
+ * Drop a piece ONTO a run and cut the run to take it.
+ *
+ * ⭐ Will, 2026-07-27: *"When I drop a turnout on the track, it should cut the
+ * track there and automatically snap to the new joints."* Snapping alone cannot
+ * do this: the middle of a run has no open joint, so there is nothing to snap
+ * TO — the joints have to be made by cutting, which is exactly what a builder
+ * does with a razor saw.
+ *
+ * ⚠️ ONLY FLEX CAN BE CUT. A turnout or a sectional piece is a moulding: you
+ * cannot saw one in half and have two of anything. Dropping onto one is refused
+ * rather than fudged.
+ *
+ * ⚠️ AND THE PIECE HAS TO FIT. It consumes length along the run — a #7 is six
+ * inches of it — so an insertion that would run off the end is refused instead
+ * of silently producing a remainder of negative length.
+ */
+declare function insertIntoRun(pieces: TrackPiece[], fresh: TrackPiece, at: {
+    x: number;
+    y: number;
+}, library?: TrackPart[], withinInches?: number): RunInsertion | null;
 /** A route the walk found: a continuous run of pieces a train can travel. */
 interface GraphRoute {
     id: string;
@@ -3174,4 +3209,4 @@ declare function poseOverridesFromDoc(doc: ModuleSchematicDoc): Record<string, {
     heading: number;
 }>;
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, BUMPER_DRAWN_INCHES, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, GENERIC_END_OF_TRACK, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TRACK_PART_KINDS, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceHand, piecePartNumber, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionalArcInches, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, BUMPER_DRAWN_INCHES, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, GENERIC_END_OF_TRACK, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type RunInsertion, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TRACK_PART_KINDS, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, insertIntoRun, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceHand, piecePartNumber, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionalArcInches, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };

package/dist/index.d.ts

@@ -677,6 +677,12 @@ interface ModuleFootprintInput {
     /** A balloon / return loop — the centre-line turns back on itself, so its far
      * end is the THROAT, not an endplate; only endplate A's face is emitted (#loop). */
     loop?: boolean;
+    /**
+     * The document already places track along a main (see {@link
+     * moduleCenterline}). Set from the doc's own `tracks`; without it a module
+     * whose track was authored before it had a geometry draws as a bare board.
+     */
+    hasPlacedTrack?: boolean;
     /** Axial endplate configs (A first, then B), same as
      * {@link ModuleGeometryInput.endplateConfigs}. `"none"` at B means the module
      * presents no far endplate, so no face is emitted there (#184/#191). */
@@ -2744,6 +2750,35 @@ declare function snapPiece(moving: TrackPiece, others: TrackPiece[], library?: T
  * owner's curve to reach something is not a fit, it is a guess.
  */
 declare function fitFlexBetween(piece: TrackPiece, others: TrackPiece[], library?: TrackPart[], withinInches?: number): TrackPiece | null;
+/** A run cut in two to let a piece in. */
+interface RunInsertion {
+    /** The whole set: the host shortened, the new piece, and the remainder. */
+    pieces: TrackPiece[];
+    /** The run that was cut, and the piece that went into it. */
+    hostId: string;
+    insertedId: string;
+}
+/**
+ * Drop a piece ONTO a run and cut the run to take it.
+ *
+ * ⭐ Will, 2026-07-27: *"When I drop a turnout on the track, it should cut the
+ * track there and automatically snap to the new joints."* Snapping alone cannot
+ * do this: the middle of a run has no open joint, so there is nothing to snap
+ * TO — the joints have to be made by cutting, which is exactly what a builder
+ * does with a razor saw.
+ *
+ * ⚠️ ONLY FLEX CAN BE CUT. A turnout or a sectional piece is a moulding: you
+ * cannot saw one in half and have two of anything. Dropping onto one is refused
+ * rather than fudged.
+ *
+ * ⚠️ AND THE PIECE HAS TO FIT. It consumes length along the run — a #7 is six
+ * inches of it — so an insertion that would run off the end is refused instead
+ * of silently producing a remainder of negative length.
+ */
+declare function insertIntoRun(pieces: TrackPiece[], fresh: TrackPiece, at: {
+    x: number;
+    y: number;
+}, library?: TrackPart[], withinInches?: number): RunInsertion | null;
 /** A route the walk found: a continuous run of pieces a train can travel. */
 interface GraphRoute {
     id: string;
@@ -3174,4 +3209,4 @@ declare function poseOverridesFromDoc(doc: ModuleSchematicDoc): Record<string, {
     heading: number;
 }>;
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, BUMPER_DRAWN_INCHES, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, GENERIC_END_OF_TRACK, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TRACK_PART_KINDS, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceHand, piecePartNumber, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionalArcInches, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, BUMPER_DRAWN_INCHES, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, GENERIC_END_OF_TRACK, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type RunInsertion, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TRACK_PART_KINDS, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, insertIntoRun, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceHand, piecePartNumber, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionalArcInches, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };

package/dist/index.js

@@ -227,7 +227,7 @@ function moduleCenterline(input) {
   if (drawn) return samplePath(drawn);
   const chained = sectionedCenterline(input);
   if (chained.length >= 2) return chained;
-  if (!input.geometryType) return [];
+  if (!input.geometryType && !input.hasPlacedTrack) return [];
   const L = input.lengthInches > 0 ? input.lengthInches : 24;
   const gt = input.geometryType;
   if (gt === "dead_end") return [{ x: 0, y: 0 }];
@@ -2311,6 +2311,16 @@ function pieceRoutePaths(piece, library = BUILT_IN_TRACK_PARTS) {
     const len = part.overallLength?.inches ?? BUMPER_DRAWN_INCHES;
     return [{ route: ["a", "a"], points: [{ x: at2.x, y: at2.y }, place(len, 0)] }];
   }
+  if (part.kind === "curve") {
+    const a = joints.find((j) => j.joint === "a");
+    const b = joints.find((j) => j.joint === "b");
+    if (!a || !b) return out;
+    const pts = flexRunPoints(sectionalArcInches(part), part.radius.inches).map(
+      (q) => place(q.x, q.y)
+    );
+    pts[pts.length - 1] = { x: b.x, y: b.y };
+    return [{ route: ["a", "b"], points: pts }];
+  }
   for (const route of geo.routes) {
     const a = at(route[0]);
     const b = at(route[1]);
@@ -2541,6 +2551,83 @@ function fitFlexBetween(piece, others, library = BUILT_IN_TRACK_PARTS, withinInc
     lengthInches: Math.round(len * 1e3) / 1e3
   };
 }
+function insertIntoRun(pieces, fresh, at, library = BUILT_IN_TRACK_PARTS, withinInches = 1) {
+  let host = null;
+  let bestD = Infinity;
+  for (const piece of pieces) {
+    const part = library.find((x) => x.id === piece.partId);
+    if (part?.kind !== "flex") continue;
+    for (const { points } of pieceRoutePaths(piece, library))
+      for (let i = 1; i < points.length; i++) {
+        const d = distanceToSegment(at, points[i - 1], points[i]);
+        if (d < bestD) {
+          bestD = d;
+          host = piece;
+        }
+      }
+  }
+  if (!host || bestD > withinInches) return null;
+  const L = host.lengthInches ?? 0;
+  const R = host.radiusInches;
+  const steps = 200;
+  let s = 0;
+  let closest = Infinity;
+  for (let i = 0; i <= steps; i++) {
+    const t = L * i / steps;
+    const local = flexRunEnd(t, R);
+    const world = placeLocal(host, local.x, local.y);
+    const d = Math.hypot(world.x - at.x, world.y - at.y);
+    if (d < closest) {
+      closest = d;
+      s = t;
+    }
+  }
+  const cutLocal = flexRunEnd(s, R);
+  const cut = placeLocal(host, cutLocal.x, cutLocal.y);
+  const heading = norm360(host.rotationDeg + (host.flipped ? -cutLocal.headingDeg : cutLocal.headingDeg));
+  const placed = { ...fresh, x: cut.x, y: cut.y, rotationDeg: heading };
+  const js = placedJoints([placed], library);
+  const entry = js.find((j) => j.joint === "throat" || j.joint === "a");
+  const exit = js.find((j) => j.joint === "through" || j.joint === "b");
+  if (!entry || !exit) return null;
+  const body = Math.hypot(exit.x - entry.x, exit.y - entry.y);
+  const rest = L - s - body;
+  if (s < 0 || rest < 0) return null;
+  const ids = new Set(pieces.map((p) => p.id));
+  let n = 1;
+  while (ids.has(`${host.id}b${n}`)) n += 1;
+  const tail = {
+    ...host,
+    id: `${host.id}b${n}`,
+    x: exit.x,
+    y: exit.y,
+    rotationDeg: exit.headingDeg,
+    lengthInches: rest
+  };
+  const out = pieces.map((p) => p.id === host.id ? { ...p, lengthInches: s } : p);
+  const kept = out.filter((p) => p.id !== host.id || s > 0);
+  return {
+    pieces: [...kept, placed, ...rest > 0 ? [tail] : []],
+    hostId: host.id,
+    insertedId: placed.id
+  };
+}
+function placeLocal(piece, x, y) {
+  const rad = piece.rotationDeg * Math.PI / 180;
+  const ly = piece.flipped ? -y : y;
+  return {
+    x: piece.x + x * Math.cos(rad) - ly * Math.sin(rad),
+    y: piece.y + x * Math.sin(rad) + ly * Math.cos(rad)
+  };
+}
+function distanceToSegment(p, a, b) {
+  const vx = b.x - a.x;
+  const vy = b.y - a.y;
+  const len2 = vx * vx + vy * vy;
+  if (len2 === 0) return Math.hypot(p.x - a.x, p.y - a.y);
+  const t = Math.max(0, Math.min(1, ((p.x - a.x) * vx + (p.y - a.y) * vy) / len2));
+  return Math.hypot(p.x - (a.x + t * vx), p.y - (a.y + t * vy));
+}
 var danglingDivergeWarning = (id) => `the route diverging at ${id} is not connected to anything`;
 var unreachedWarning = (id) => `${id} is not reachable from the endplate \u2014 nothing connects it`;
 function walkTrackGraph(graph, pieces, startAt, library = BUILT_IN_TRACK_PARTS) {
@@ -3551,6 +3638,6 @@ function poseOverridesFromDoc(doc) {
   return out;
 }
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, BUMPER_DRAWN_INCHES, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, GENERIC_END_OF_TRACK, JOINT_SNAP_INCHES, MAIN2_TRACK_ID, MAIN_TRACK_ID, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, PINCH_EASE_INCHES, RAIL_GAUGE_INCHES, TIE_HALF_LENGTH_INCHES, TRACK_PART_KINDS, TURNOUT_LEAD_INCHES_PER_FROG, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceHand, piecePartNumber, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionalArcInches, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, BUMPER_DRAWN_INCHES, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, GENERIC_END_OF_TRACK, JOINT_SNAP_INCHES, MAIN2_TRACK_ID, MAIN_TRACK_ID, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, PINCH_EASE_INCHES, RAIL_GAUGE_INCHES, TIE_HALF_LENGTH_INCHES, TRACK_PART_KINDS, TURNOUT_LEAD_INCHES_PER_FROG, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, insertIntoRun, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceHand, piecePartNumber, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionalArcInches, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
 //# sourceMappingURL=index.js.map
 //# sourceMappingURL=index.js.map