@willcgage/module-schematic 0.96.0 → 0.97.0

package/dist/index.d.cts

@@ -1658,7 +1658,12 @@ interface TrackPart {
      * {@link secondaryFrogAngle}, which no single turnout has, and
      * {@link piecesPerAssembly} — because its lengths describe the HALF, not the
      * finished crossover. */
-    kind: "turnout" | "wye" | "curved-turnout" | "crossover" | "crossing" | "flex" | "bumper";
+    kind: "turnout" | "wye" | "curved-turnout" | "crossover" | "crossing" | "flex"
+    /** ⚠️ A SECTIONAL PIECE IS NOT FLEX CUT TO LENGTH, even though the rail ends
+     * up in the same place. Its length belongs to the PART and cannot be
+     * changed, because an owner has a box of them and cannot cut one — which is
+     * the whole reason to model it separately from flex. */
+     | "straight" | "curve" | "bumper";
     /** Manufacturer part numbers by hand, where the part has a hand. */
     partNumbers?: {
         left?: string;
@@ -1728,6 +1733,23 @@ interface TrackPart {
     divergingLength?: PartDimension;
     /** Diverging route radius (straight turnouts). */
     divergingRadius?: PartDimension;
+    /**
+     * SECTIONAL CURVE only: the radius it is built to.
+     *
+     * ⚠️ Distinct from {@link outerRadius}/{@link innerRadius}, which are the two
+     * routes of a CURVED TURNOUT. A plain curve has one radius, and giving it the
+     * "outer" one would say there is another.
+     */
+    radius?: PartDimension;
+    /**
+     * SECTIONAL CURVE only: how much of a circle the piece covers, degrees.
+     *
+     * ⭐ Radius and arc are how curves are SOLD ("19″ radius, 10°"), so they are
+     * what an owner can read off the box. The piece's length is the arc between
+     * them and is never stored — a chord recorded as a length would quietly
+     * shorten every curve on the module.
+     */
+    arcDegrees?: number;
     /** Curved turnouts: the two concentric radii. */
     outerRadius?: PartDimension;
     innerRadius?: PartDimension;
@@ -2304,6 +2326,9 @@ interface StoredTrackPart {
     outerRadiusInches?: number | null;
     innerRadiusInches?: number | null;
     radiusSource?: string | null;
+    /** Sectional curve: its single radius, and how far it turns. */
+    radiusInches?: number | null;
+    arcDegrees?: number | null;
     actualAngleDeg?: number | null;
     actualAngleSource?: string | null;
     measurementNote?: string | null;
@@ -2627,7 +2652,19 @@ declare const JOINT_SNAP_INCHES = 0.01;
  * scrap. A named product supplies its own `overallLength` and this stops
  * applying.
  */
+/** Every kind of part the library can hold. Beside the type it mirrors, so a
+ * new kind is one edit and not two. */
+declare const TRACK_PART_KINDS: TrackPart["kind"][];
 declare const BUMPER_DRAWN_INCHES = 0.75;
+/**
+ * How long a sectional curve's RAIL is — the arc, not the chord across it.
+ *
+ * ⚠️ Curves are sold as a radius and an arc, never as a length, and the chord is
+ * always shorter. Recording one as the piece's length would put everything past
+ * that curve closer to endplate A than it is — the same mistake the walk exists
+ * to avoid, arriving through the parts library instead.
+ */
+declare function sectionalArcInches(part: TrackPart): number;
 /**
  * Where a bent run's far end lands, and which way it points — in the piece's own
  * frame, starting at its origin heading +x.
@@ -3137,4 +3174,4 @@ declare function poseOverridesFromDoc(doc: ModuleSchematicDoc): Record<string, {
     heading: number;
 }>;
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, BUMPER_DRAWN_INCHES, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, GENERIC_END_OF_TRACK, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceHand, piecePartNumber, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, BUMPER_DRAWN_INCHES, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, GENERIC_END_OF_TRACK, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TRACK_PART_KINDS, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceHand, piecePartNumber, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionalArcInches, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };

package/dist/index.d.ts

@@ -1658,7 +1658,12 @@ interface TrackPart {
      * {@link secondaryFrogAngle}, which no single turnout has, and
      * {@link piecesPerAssembly} — because its lengths describe the HALF, not the
      * finished crossover. */
-    kind: "turnout" | "wye" | "curved-turnout" | "crossover" | "crossing" | "flex" | "bumper";
+    kind: "turnout" | "wye" | "curved-turnout" | "crossover" | "crossing" | "flex"
+    /** ⚠️ A SECTIONAL PIECE IS NOT FLEX CUT TO LENGTH, even though the rail ends
+     * up in the same place. Its length belongs to the PART and cannot be
+     * changed, because an owner has a box of them and cannot cut one — which is
+     * the whole reason to model it separately from flex. */
+     | "straight" | "curve" | "bumper";
     /** Manufacturer part numbers by hand, where the part has a hand. */
     partNumbers?: {
         left?: string;
@@ -1728,6 +1733,23 @@ interface TrackPart {
     divergingLength?: PartDimension;
     /** Diverging route radius (straight turnouts). */
     divergingRadius?: PartDimension;
+    /**
+     * SECTIONAL CURVE only: the radius it is built to.
+     *
+     * ⚠️ Distinct from {@link outerRadius}/{@link innerRadius}, which are the two
+     * routes of a CURVED TURNOUT. A plain curve has one radius, and giving it the
+     * "outer" one would say there is another.
+     */
+    radius?: PartDimension;
+    /**
+     * SECTIONAL CURVE only: how much of a circle the piece covers, degrees.
+     *
+     * ⭐ Radius and arc are how curves are SOLD ("19″ radius, 10°"), so they are
+     * what an owner can read off the box. The piece's length is the arc between
+     * them and is never stored — a chord recorded as a length would quietly
+     * shorten every curve on the module.
+     */
+    arcDegrees?: number;
     /** Curved turnouts: the two concentric radii. */
     outerRadius?: PartDimension;
     innerRadius?: PartDimension;
@@ -2304,6 +2326,9 @@ interface StoredTrackPart {
     outerRadiusInches?: number | null;
     innerRadiusInches?: number | null;
     radiusSource?: string | null;
+    /** Sectional curve: its single radius, and how far it turns. */
+    radiusInches?: number | null;
+    arcDegrees?: number | null;
     actualAngleDeg?: number | null;
     actualAngleSource?: string | null;
     measurementNote?: string | null;
@@ -2627,7 +2652,19 @@ declare const JOINT_SNAP_INCHES = 0.01;
  * scrap. A named product supplies its own `overallLength` and this stops
  * applying.
  */
+/** Every kind of part the library can hold. Beside the type it mirrors, so a
+ * new kind is one edit and not two. */
+declare const TRACK_PART_KINDS: TrackPart["kind"][];
 declare const BUMPER_DRAWN_INCHES = 0.75;
+/**
+ * How long a sectional curve's RAIL is — the arc, not the chord across it.
+ *
+ * ⚠️ Curves are sold as a radius and an arc, never as a length, and the chord is
+ * always shorter. Recording one as the piece's length would put everything past
+ * that curve closer to endplate A than it is — the same mistake the walk exists
+ * to avoid, arriving through the parts library instead.
+ */
+declare function sectionalArcInches(part: TrackPart): number;
 /**
  * Where a bent run's far end lands, and which way it points — in the piece's own
  * frame, starting at its origin heading +x.
@@ -3137,4 +3174,4 @@ declare function poseOverridesFromDoc(doc: ModuleSchematicDoc): Record<string, {
     heading: number;
 }>;
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, BUMPER_DRAWN_INCHES, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, GENERIC_END_OF_TRACK, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceHand, piecePartNumber, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, BUMPER_DRAWN_INCHES, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, GENERIC_END_OF_TRACK, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TRACK_PART_KINDS, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceHand, piecePartNumber, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionalArcInches, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };

package/dist/index.js

@@ -2017,14 +2017,14 @@ function storedPartToTrackPart(row) {
     source: points.source === "measured" && frog.source === "measured" ? "measured" : "derived",
     ...note ? { note } : {}
   } : dim(row.leadInches, row.leadSource);
-  const kind = row.kind;
+  const kind = TRACK_PART_KINDS.includes(row.kind) ? row.kind : "turnout";
   const part = {
     id: row.slug,
     manufacturer: row.manufacturer,
     line: row.line,
     scale: "N",
     name: row.name,
-    kind: kind === "wye" || kind === "curved-turnout" || kind === "crossing" ? kind : "turnout"
+    kind
   };
   const numbers = {
     ...row.partNumberLeft ? { left: row.partNumberLeft } : {},
@@ -2059,6 +2059,9 @@ function storedPartToTrackPart(row) {
   const inner = dim(row.innerRadiusInches, row.radiusSource);
   if (outer) part.outerRadius = outer;
   if (inner) part.innerRadius = inner;
+  const radius = dim(row.radiusInches, row.radiusSource);
+  if (radius) part.radius = radius;
+  if (typeof row.arcDegrees === "number") part.arcDegrees = row.arcDegrees;
   if (typeof row.actualAngleDeg === "number")
     part.actualAngle = {
       deg: row.actualAngleDeg,
@@ -2172,6 +2175,13 @@ function turnoutClosure(size, opts = {}) {
 function partGeometryGap(part) {
   if (part.kind === "flex") return null;
   if (part.kind === "bumper") return null;
+  if (part.kind === "straight")
+    return part.overallLength ? null : "no overall length \u2014 a sectional straight IS its length";
+  if (part.kind === "curve") {
+    if (!part.radius) return "no radius \u2014 a sectional curve is a radius and an arc";
+    if (part.arcDegrees == null) return "no arc \u2014 the radius alone does not say how far it turns";
+    return null;
+  }
   if (part.kind === "crossover")
     return "a crossover fixture builds one HALF of the assembly (piecesPerAssembly), so its published lengths describe a piece, not the finished part \u2014 the geometry of the whole crossover is not yet derivable from them";
   if (part.kind === "crossing") return "crossing geometry is not modelled yet";
@@ -2185,6 +2195,18 @@ function partGeometryGap(part) {
 }
 function partGeometry(part, library = BUILT_IN_TRACK_PARTS) {
   if (partGeometryGap(part)) return null;
+  if (part.kind === "straight" || part.kind === "curve") {
+    const end = part.kind === "curve" ? flexRunEnd(sectionalArcInches(part), part.radius.inches) : { x: part.overallLength.inches, y: 0, headingDeg: 0 };
+    return {
+      joints: [
+        { id: "a", role: "throat", x: 0, y: 0, angleDeg: 180 },
+        { id: "b", role: "through", x: end.x, y: end.y, angleDeg: end.headingDeg }
+      ],
+      routes: [["a", "b"]],
+      source: (part.kind === "curve" ? part.radius : part.overallLength)?.source ?? "unverified",
+      divergingEndMeasured: false
+    };
+  }
   if (part.kind === "bumper") {
     return {
       joints: [{ id: "a", role: "throat", x: 0, y: 0, angleDeg: 180 }],
@@ -2352,7 +2374,22 @@ function partsPlaceable(library = BUILT_IN_TRACK_PARTS) {
   return { placeable, blocked };
 }
 var JOINT_SNAP_INCHES = 0.01;
+var TRACK_PART_KINDS = [
+  "turnout",
+  "wye",
+  "curved-turnout",
+  "crossover",
+  "crossing",
+  "flex",
+  "straight",
+  "curve",
+  "bumper"
+];
 var BUMPER_DRAWN_INCHES = 0.75;
+function sectionalArcInches(part) {
+  if (part.kind !== "curve" || !part.radius || part.arcDegrees == null) return 0;
+  return part.radius.inches * Math.abs(part.arcDegrees) * Math.PI / 180;
+}
 function flexRunEnd(lengthInches, radiusInches) {
   const L = lengthInches;
   const R = radiusInches;
@@ -2528,6 +2565,7 @@ function walkTrackGraph(graph, pieces, startAt, library = BUILT_IN_TRACK_PARTS)
       const piece = pieceById.get(a.piece);
       const part = piece ? partOf(a.piece) : void 0;
       if (piece && part?.kind === "flex") return piece.lengthInches ?? 0;
+      if (part?.kind === "curve") return sectionalArcInches(part);
     }
     return Math.hypot(a.x - b.x, a.y - b.y);
   };
@@ -3513,6 +3551,6 @@ function poseOverridesFromDoc(doc) {
   return out;
 }
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, BUMPER_DRAWN_INCHES, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, GENERIC_END_OF_TRACK, JOINT_SNAP_INCHES, MAIN2_TRACK_ID, MAIN_TRACK_ID, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, PINCH_EASE_INCHES, RAIL_GAUGE_INCHES, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceHand, piecePartNumber, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, BUMPER_DRAWN_INCHES, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, GENERIC_END_OF_TRACK, JOINT_SNAP_INCHES, MAIN2_TRACK_ID, MAIN_TRACK_ID, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, PINCH_EASE_INCHES, RAIL_GAUGE_INCHES, TIE_HALF_LENGTH_INCHES, TRACK_PART_KINDS, TURNOUT_LEAD_INCHES_PER_FROG, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceHand, piecePartNumber, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionalArcInches, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
 //# sourceMappingURL=index.js.map
 //# sourceMappingURL=index.js.map