@willcgage/module-schematic 0.93.0 → 0.94.0

package/dist/index.d.cts

@@ -2622,6 +2622,22 @@ interface PieceSnap {
  * inch.
  */
 declare function snapPiece(moving: TrackPiece, others: TrackPiece[], library?: TrackPart[], withinInches?: number): PieceSnap | null;
+/**
+ * Cut a run of flex to fit BETWEEN two joints — the piece's near end already
+ * where it belongs, its far end brought onto another open joint.
+ *
+ * ⭐ WITHOUT THIS A CROSSOVER CANNOT BE BUILT BY HAND. A piece snaps by ONE end,
+ * and a flex run's length handle drags along its own axis, so the far end can
+ * never be steered onto the turnout opposite: an owner would have to type an
+ * angle and a length to a hundredth of an inch. Cutting a piece to fit between
+ * two fixed points is exactly what a builder does with flex, and it is the last
+ * thing standing between "two mains" and "two mains joined".
+ *
+ * ⚠️ STRAIGHT RUNS ONLY. A bend is already fixed by its radius; asking an arc to
+ * meet a second point as well over-constrains it, and quietly re-bending an
+ * owner's curve to reach something is not a fit, it is a guess.
+ */
+declare function fitFlexBetween(piece: TrackPiece, others: TrackPiece[], library?: TrackPart[], withinInches?: number): TrackPiece | null;
 /** A route the walk found: a continuous run of pieces a train can travel. */
 interface GraphRoute {
     id: string;
@@ -3049,4 +3065,4 @@ declare function poseOverridesFromDoc(doc: ModuleSchematicDoc): Record<string, {
     heading: number;
 }>;
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };

package/dist/index.d.ts

@@ -2622,6 +2622,22 @@ interface PieceSnap {
  * inch.
  */
 declare function snapPiece(moving: TrackPiece, others: TrackPiece[], library?: TrackPart[], withinInches?: number): PieceSnap | null;
+/**
+ * Cut a run of flex to fit BETWEEN two joints — the piece's near end already
+ * where it belongs, its far end brought onto another open joint.
+ *
+ * ⭐ WITHOUT THIS A CROSSOVER CANNOT BE BUILT BY HAND. A piece snaps by ONE end,
+ * and a flex run's length handle drags along its own axis, so the far end can
+ * never be steered onto the turnout opposite: an owner would have to type an
+ * angle and a length to a hundredth of an inch. Cutting a piece to fit between
+ * two fixed points is exactly what a builder does with flex, and it is the last
+ * thing standing between "two mains" and "two mains joined".
+ *
+ * ⚠️ STRAIGHT RUNS ONLY. A bend is already fixed by its radius; asking an arc to
+ * meet a second point as well over-constrains it, and quietly re-bending an
+ * owner's curve to reach something is not a fit, it is a guess.
+ */
+declare function fitFlexBetween(piece: TrackPiece, others: TrackPiece[], library?: TrackPart[], withinInches?: number): TrackPiece | null;
 /** A route the walk found: a continuous run of pieces a train can travel. */
 interface GraphRoute {
     id: string;
@@ -3049,4 +3065,4 @@ declare function poseOverridesFromDoc(doc: ModuleSchematicDoc): Record<string, {
     heading: number;
 }>;
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };

package/dist/index.js

@@ -2440,6 +2440,33 @@ function snapPiece(moving, others, library = BUILT_IN_TRACK_PARTS, withinInches
     to: best.t.key
   };
 }
+function fitFlexBetween(piece, others, library = BUILT_IN_TRACK_PARTS, withinInches = 0.5) {
+  const part = library.find((p) => p.id === piece.partId);
+  if (part?.kind !== "flex" || piece.radiusInches) return null;
+  const mine = placedJoints([piece], library);
+  const far = mine.find((j) => j.joint === "b");
+  const near = mine.find((j) => j.joint === "a");
+  if (!far || !near) return null;
+  const graph = buildTrackGraph(others, library);
+  const taken = new Set(graph.connections.flatMap((c) => [c.a, c.b]));
+  let best = null;
+  for (const j of graph.joints) {
+    if (taken.has(j.key)) continue;
+    if (Math.hypot(j.x - near.x, j.y - near.y) <= JOINT_SNAP_INCHES) continue;
+    const d = Math.hypot(j.x - far.x, j.y - far.y);
+    if (d <= withinInches && (!best || d < best.d)) best = { j, d };
+  }
+  if (!best) return null;
+  const dx = best.j.x - piece.x;
+  const dy = best.j.y - piece.y;
+  const len = Math.hypot(dx, dy);
+  if (!(len > 0)) return null;
+  return {
+    ...piece,
+    rotationDeg: norm360(Math.atan2(dy, dx) * 180 / Math.PI),
+    lengthInches: Math.round(len * 1e3) / 1e3
+  };
+}
 var danglingDivergeWarning = (id) => `the route diverging at ${id} is not connected to anything`;
 var unreachedWarning = (id) => `${id} is not reachable from the endplate \u2014 nothing connects it`;
 function walkTrackGraph(graph, pieces, startAt, library = BUILT_IN_TRACK_PARTS) {
@@ -2633,9 +2660,16 @@ function graphToDoc(pieces, input) {
   const trackIdOf = /* @__PURE__ */ new Map([["main", MAIN_TRACK_ID]]);
   if (twoMains) trackIdOf.set("main2:main", MAIN2_TRACK_ID);
   for (const r of branches) trackIdOf.set(r.id, r.pieces[0]);
-  const laneOf = (r) => {
+  const emitted = /* @__PURE__ */ new Set();
+  const uniqueBranches = branches.filter((r) => {
+    const id = trackIdOf.get(r.id);
+    if (emitted.has(id)) return false;
+    emitted.add(id);
+    return true;
+  });
+  const laneOf = (r, among) => {
     const side = Math.sign(r.lateral) || 1;
-    const sameSide = branches.filter((x) => (Math.sign(x.lateral) || 1) === side).sort((a, b) => Math.abs(a.lateral) - Math.abs(b.lateral));
+    const sameSide = among.filter((x) => (Math.sign(x.lateral) || 1) === side).sort((a, b) => Math.abs(a.lateral) - Math.abs(b.lateral));
     const taken = side === main2Lane ? 1 : 0;
     return side * (sameSide.indexOf(r) + 1 + taken);
   };
@@ -2661,7 +2695,7 @@ function graphToDoc(pieces, input) {
       }
     ] : []
   ];
-  for (const r of branches) {
+  for (const r of uniqueBranches) {
     const id = trackIdOf.get(r.id);
     const meta = input.meta?.[id] ?? {};
     tracks.push({
@@ -2669,7 +2703,7 @@ function graphToDoc(pieces, input) {
       // It runs back into a second turnout, or it doesn't. That is the whole
       // difference between a siding and a spur, and it is read, not declared.
       role: r.endsAt ? "siding" : "spur",
-      lane: laneOf(r),
+      lane: laneOf(r, uniqueBranches),
       fromPos: round(Math.min(r.fromPos, r.toPos)),
       toPos: round(Math.max(r.fromPos, r.toPos)),
       ...meta.trackName ? { trackName: meta.trackName } : {},
@@ -2720,6 +2754,12 @@ function graphToDoc(pieces, input) {
     });
   }
   turnouts.sort((a, b) => a.pos - b.pos);
+  for (const t of tracks) {
+    if (t.role === "main") continue;
+    const ends = turnouts.filter((sw) => sw.divergeTrack === t.id);
+    if (ends.length >= 2 && new Set(ends.map((sw) => sw.onTrack)).size >= 2)
+      t.role = "crossover";
+  }
   const place = (a, what) => {
     if (!a) return null;
     const hit = resolveGraphAnchor(a, walk, pieces, library);
@@ -3423,6 +3463,6 @@ function poseOverridesFromDoc(doc) {
   return out;
 }
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, JOINT_SNAP_INCHES, MAIN2_TRACK_ID, MAIN_TRACK_ID, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, PINCH_EASE_INCHES, RAIL_GAUGE_INCHES, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_MAIN_MIN_RADIUS_INCHES, FREEMO_REVERSE_CURVE_STRAIGHT_INCHES, FREEMO_TRACK_SPACING_INCHES, JOINT_SNAP_INCHES, MAIN2_TRACK_ID, MAIN_TRACK_ID, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, PINCH_EASE_INCHES, RAIL_GAUGE_INCHES, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, fitFlexBetween, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
 //# sourceMappingURL=index.js.map
 //# sourceMappingURL=index.js.map