@willcgage/module-schematic 0.91.0 → 0.92.0

package/dist/index.d.cts

@@ -2465,8 +2465,27 @@ interface TrackPiece {
     rotationDeg: number;
     /** Mirrored across its own through route — a left-hand turnout from a right. */
     flipped?: boolean;
-    /** FLEX ONLY: how long this run is. The one piece a builder cuts (ADR 0001). */
+    /** FLEX ONLY: how long this run is. The one piece a builder cuts (ADR 0001).
+     * ⚠️ ARC length when the run is bent — the rail, not the chord across it. */
     lengthInches?: number;
+    /**
+     * FLEX ONLY: the radius this run is bent to, inches. Absent = straight.
+     *
+     * ⭐ It lives on the PIECE, not the part, because bending flex is what a
+     * builder does to it — the product is the same product either way. That is
+     * the same reason `lengthInches` is here.
+     *
+     * ⭐ SIGNED, and the sign IS the side: positive curves toward +y in the
+     * piece's own frame, negative the other way. One number, no separate
+     * "direction" field to disagree with it — the same reasoning that keeps a
+     * hand off turnouts, where the side is simply where the piece is.
+     *
+     * ⚠️ {@link lengthInches} stays the ARC length. `pos` is arc length
+     * everywhere in this model, a curve's rail is genuinely longer than the chord
+     * it spans (a 90° corner at R30 runs 47.1″ across a 42.4″ chord), and it is
+     * the rail a train travels.
+     */
+    radiusInches?: number;
     /** Owner's label, carried onto whatever route this piece ends up in. */
     name?: string;
 }
@@ -2519,6 +2538,19 @@ interface TrackGraph {
  * tight enough that nothing joins by accident, loose enough to absorb the
  * rounding of a drag. */
 declare const JOINT_SNAP_INCHES = 0.01;
+/**
+ * Where a bent run's far end lands, and which way it points — in the piece's own
+ * frame, starting at its origin heading +x.
+ *
+ * ONE definition, called by both {@link placedJoints} and
+ * {@link pieceRoutePaths}, so the drawn rail cannot arrive anywhere other than
+ * the joint at the end of it.
+ */
+declare function flexRunEnd(lengthInches: number, radiusInches?: number): {
+    x: number;
+    y: number;
+    headingDeg: number;
+};
 /** Every piece's joints, transformed onto the board. */
 declare function placedJoints(pieces: TrackPiece[], library?: TrackPart[]): PlacedJoint[];
 /**
@@ -2986,4 +3018,4 @@ declare function poseOverridesFromDoc(doc: ModuleSchematicDoc): Record<string, {
     heading: number;
 }>;
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };

package/dist/index.d.ts

@@ -2465,8 +2465,27 @@ interface TrackPiece {
     rotationDeg: number;
     /** Mirrored across its own through route — a left-hand turnout from a right. */
     flipped?: boolean;
-    /** FLEX ONLY: how long this run is. The one piece a builder cuts (ADR 0001). */
+    /** FLEX ONLY: how long this run is. The one piece a builder cuts (ADR 0001).
+     * ⚠️ ARC length when the run is bent — the rail, not the chord across it. */
     lengthInches?: number;
+    /**
+     * FLEX ONLY: the radius this run is bent to, inches. Absent = straight.
+     *
+     * ⭐ It lives on the PIECE, not the part, because bending flex is what a
+     * builder does to it — the product is the same product either way. That is
+     * the same reason `lengthInches` is here.
+     *
+     * ⭐ SIGNED, and the sign IS the side: positive curves toward +y in the
+     * piece's own frame, negative the other way. One number, no separate
+     * "direction" field to disagree with it — the same reasoning that keeps a
+     * hand off turnouts, where the side is simply where the piece is.
+     *
+     * ⚠️ {@link lengthInches} stays the ARC length. `pos` is arc length
+     * everywhere in this model, a curve's rail is genuinely longer than the chord
+     * it spans (a 90° corner at R30 runs 47.1″ across a 42.4″ chord), and it is
+     * the rail a train travels.
+     */
+    radiusInches?: number;
     /** Owner's label, carried onto whatever route this piece ends up in. */
     name?: string;
 }
@@ -2519,6 +2538,19 @@ interface TrackGraph {
  * tight enough that nothing joins by accident, loose enough to absorb the
  * rounding of a drag. */
 declare const JOINT_SNAP_INCHES = 0.01;
+/**
+ * Where a bent run's far end lands, and which way it points — in the piece's own
+ * frame, starting at its origin heading +x.
+ *
+ * ONE definition, called by both {@link placedJoints} and
+ * {@link pieceRoutePaths}, so the drawn rail cannot arrive anywhere other than
+ * the joint at the end of it.
+ */
+declare function flexRunEnd(lengthInches: number, radiusInches?: number): {
+    x: number;
+    y: number;
+    headingDeg: number;
+};
 /** Every piece's joints, transformed onto the board. */
 declare function placedJoints(pieces: TrackPiece[], library?: TrackPart[]): PlacedJoint[];
 /**
@@ -2986,4 +3018,4 @@ declare function poseOverridesFromDoc(doc: ModuleSchematicDoc): Record<string, {
     heading: number;
 }>;
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplateEdge, type EndplateEdgePose, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, type GeometryType, type GraphAnchor, type GraphConflict, type GraphConnection, type GraphDocInput, type GraphDocResult, type GraphRoute, type GraphTurnout, type GraphWalk, type ImportedPart, type IndustryLabelMode, type IndustrySpot, JOINT_SNAP_INCHES, type LanePinch, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, PINCH_EASE_INCHES, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartGeometry, type PartJoint, type PartJointRole, type PartSegment, type PieceSnap, type PlacedJoint, RAIL_GAUGE_INCHES, type ResolvedAnchor, type ReturnLoopGeometry, type ReturnLoopShape, type RouteSpan, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionEnd, type SectionEndAssessment, type SectionFootprint, type SectionJointAssessment, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackGraph, type TrackPart, type TrackPiece, type TrackRole, type TurnoutClosure, type TurnoutKind, type UsableCapacity, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };

package/dist/index.js

@@ -2266,8 +2266,16 @@ function pieceRoutePaths(piece, library = BUILT_IN_TRACK_PARTS) {
     const b = at(route[1]);
     if (!a || !b) continue;
     const ends = [{ x: a.x, y: a.y }, { x: b.x, y: b.y }];
+    if (part.kind === "flex") {
+      const pts2 = flexRunPoints(piece.lengthInches ?? 0, piece.radiusInches).map(
+        (q) => place(q.x, q.y)
+      );
+      pts2[pts2.length - 1] = { x: b.x, y: b.y };
+      out.push({ route, points: pts2 });
+      continue;
+    }
     const diverging = route.some((r) => r === "diverge" || r === "legA" || r === "legB");
-    if (!diverging || part.kind === "flex") {
+    if (!diverging) {
       out.push({ route, points: ends });
       continue;
     }
@@ -2306,6 +2314,25 @@ function partsPlaceable(library = BUILT_IN_TRACK_PARTS) {
   return { placeable, blocked };
 }
 var JOINT_SNAP_INCHES = 0.01;
+function flexRunEnd(lengthInches, radiusInches) {
+  const L = lengthInches;
+  const R = radiusInches;
+  if (!R || !Number.isFinite(R) || Math.abs(R) < 1e-6)
+    return { x: L, y: 0, headingDeg: 0 };
+  const theta = L / R;
+  return {
+    x: Math.abs(R) * Math.sin(Math.abs(theta)) * Math.sign(L || 1),
+    y: R * (1 - Math.cos(theta)),
+    headingDeg: theta * 180 / Math.PI
+  };
+}
+function flexRunPoints(lengthInches, radiusInches, steps = 16) {
+  if (!radiusInches || !Number.isFinite(radiusInches) || Math.abs(radiusInches) < 1e-6)
+    return [{ x: 0, y: 0 }, { x: lengthInches, y: 0 }];
+  const out = [];
+  for (let i = 0; i <= steps; i++) out.push(flexRunEnd(lengthInches * i / steps, radiusInches));
+  return out.map((p) => ({ x: p.x, y: p.y }));
+}
 function placedJoints(pieces, library = BUILT_IN_TRACK_PARTS) {
   const out = [];
   const RAD = Math.PI / 180;
@@ -2316,10 +2343,13 @@ function placedJoints(pieces, library = BUILT_IN_TRACK_PARTS) {
     if (!geo) continue;
     const c = Math.cos(p.rotationDeg * RAD);
     const s = Math.sin(p.rotationDeg * RAD);
+    const run = part.kind === "flex" ? flexRunEnd(p.lengthInches ?? 0, p.radiusInches) : null;
     for (const j of geo.joints) {
-      const lx = part.kind === "flex" && j.id === "b" ? p.lengthInches ?? 0 : j.x;
-      const ly = p.flipped ? -j.y : j.y;
-      const h = (p.flipped ? -j.angleDeg : j.angleDeg) + p.rotationDeg;
+      const far = run && j.id === "b";
+      const lx = far ? run.x : j.x;
+      const ly = p.flipped ? -(far ? run.y : j.y) : far ? run.y : j.y;
+      const local = far ? run.headingDeg : j.angleDeg;
+      const h = (p.flipped ? -local : local) + p.rotationDeg;
       out.push({
         key: `${p.id}.${j.id}`,
         piece: p.id,
@@ -2425,7 +2455,15 @@ function walkTrackGraph(graph, pieces, startAt, library = BUILT_IN_TRACK_PARTS)
     const part = partOf(pid);
     return part ? partGeometry(part, library) : null;
   };
-  const gap = (a, b) => a && b ? Math.hypot(a.x - b.x, a.y - b.y) : 0;
+  const gap = (a, b) => {
+    if (!a || !b) return 0;
+    if (a.piece === b.piece) {
+      const piece = pieceById.get(a.piece);
+      const part = piece ? partOf(a.piece) : void 0;
+      if (piece && part?.kind === "flex") return piece.lengthInches ?? 0;
+    }
+    return Math.hypot(a.x - b.x, a.y - b.y);
+  };
   const routes = [];
   const turnouts = [];
   const warnings = [];
@@ -3325,6 +3363,6 @@ function poseOverridesFromDoc(doc) {
   return out;
 }
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, JOINT_SNAP_INCHES, MAIN2_TRACK_ID, MAIN_TRACK_ID, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, PINCH_EASE_INCHES, RAIL_GAUGE_INCHES, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, CLEARANCE_SPACING_INCHES, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, FAST_TRACKS_N_ME55, FAST_TRACKS_N_ME55_CROSSOVERS, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, JOINT_SNAP_INCHES, MAIN2_TRACK_ID, MAIN_TRACK_ID, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, PINCH_EASE_INCHES, RAIL_GAUGE_INCHES, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, WHOLE_MODULE_SECTION_ID, asModuleSchematic, assessSectionEnd, assessSectionJoint, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTrackGraph, buildTransition, carCapacity, checkEndplateWidth, clearancePointPastFrogInches, crossoverPinches, deriveEndplatePoses, deriveGraphDoc, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateEdgePose, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexRunEnd, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, graphToDoc, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, laneOffsetAt, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partGeometry, partGeometryGap, partOutlineAtFrog, partsPlaceable, pastFrogInchesForSize, pathLengthInches, pieceRoutePaths, placedJoints, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, resolveGraphAnchor, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, snapPiece, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize, usableCapacity, walkTrackGraph };
 //# sourceMappingURL=index.js.map
 //# sourceMappingURL=index.js.map