@willcgage/module-schematic 0.72.0 → 0.74.0

package/dist/index.d.cts

@@ -771,6 +771,35 @@ declare function scaleFeetToInches(feet: number, ratio?: number): number;
  * ~3.0″; ~3.3″ over the couplers — the real spacing a cut of cars takes. The
  * single constant every repo reads so a track's car count matches everywhere. */
 declare const N_CAR_LENGTH_INCHES = 3.3;
+/** How much of a car-spot span has no rail under it (#194). */
+interface SpanOverhang {
+    /** Inches the span runs past the track's near end (0 = it starts on track). */
+    beforeInches: number;
+    /** Inches it runs past the far end. */
+    afterInches: number;
+    /** The part of the span that IS on the track. */
+    onTrackInches: number;
+    /** Total overhang — `beforeInches + afterInches`. 0 = the span fits. */
+    overhangInches: number;
+}
+/**
+ * How far a car-spot span runs past the ends of the track it spots on (#194).
+ *
+ * An industry is a span with a start and an end, and its capacity is computed
+ * from those — but nothing checked that the span fits on the siding it's
+ * spotting. FMN-0013's "Team track" claims 29.8″ → 41″ on a track running
+ * 30″ → 39″: about a car and a half of capacity with no rail under it.
+ *
+ * Both spans are given in the same coordinate (inches along the module) and
+ * either may run "backwards" — a siding authored east-to-west is ordinary — so
+ * both are normalised first.
+ */
+declare function spanOverhang(input: {
+    fromPos: number;
+    toPos: number;
+    trackFromPos: number;
+    trackToPos: number;
+}): SpanOverhang;
 /** How many cars fit in a span, from its drawn length — the derived capacity a
  * siding or an industry spot holds (never typed). */
 declare function carCapacity(fromPos: number, toPos: number, carLengthInches?: number): number;
@@ -2022,4 +2051,4 @@ declare function poseOverridesFromDoc(doc: ModuleSchematicDoc): Record<string, {
     heading: number;
 }>;
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, type GeometryType, type ImportedPart, type IndustryLabelMode, type IndustrySpot, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartSegment, RAIL_GAUGE_INCHES, type ReturnLoopGeometry, type ReturnLoopShape, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionFootprint, type SectionRelativePos, type SignalFacing, type SignalSide, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackPart, type TrackRole, type TurnoutClosure, type TurnoutKind, WHOLE_MODULE_SECTION_ID, asModuleSchematic, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTransition, carCapacity, checkEndplateWidth, deriveEndplatePoses, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partOutlineAtFrog, pastFrogInchesForSize, pathLengthInches, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, type GeometryType, type ImportedPart, type IndustryLabelMode, type IndustrySpot, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartSegment, RAIL_GAUGE_INCHES, type ReturnLoopGeometry, type ReturnLoopShape, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionFootprint, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackPart, type TrackRole, type TurnoutClosure, type TurnoutKind, WHOLE_MODULE_SECTION_ID, asModuleSchematic, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTransition, carCapacity, checkEndplateWidth, deriveEndplatePoses, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partOutlineAtFrog, pastFrogInchesForSize, pathLengthInches, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize };

package/dist/index.d.ts

@@ -771,6 +771,35 @@ declare function scaleFeetToInches(feet: number, ratio?: number): number;
  * ~3.0″; ~3.3″ over the couplers — the real spacing a cut of cars takes. The
  * single constant every repo reads so a track's car count matches everywhere. */
 declare const N_CAR_LENGTH_INCHES = 3.3;
+/** How much of a car-spot span has no rail under it (#194). */
+interface SpanOverhang {
+    /** Inches the span runs past the track's near end (0 = it starts on track). */
+    beforeInches: number;
+    /** Inches it runs past the far end. */
+    afterInches: number;
+    /** The part of the span that IS on the track. */
+    onTrackInches: number;
+    /** Total overhang — `beforeInches + afterInches`. 0 = the span fits. */
+    overhangInches: number;
+}
+/**
+ * How far a car-spot span runs past the ends of the track it spots on (#194).
+ *
+ * An industry is a span with a start and an end, and its capacity is computed
+ * from those — but nothing checked that the span fits on the siding it's
+ * spotting. FMN-0013's "Team track" claims 29.8″ → 41″ on a track running
+ * 30″ → 39″: about a car and a half of capacity with no rail under it.
+ *
+ * Both spans are given in the same coordinate (inches along the module) and
+ * either may run "backwards" — a siding authored east-to-west is ordinary — so
+ * both are normalised first.
+ */
+declare function spanOverhang(input: {
+    fromPos: number;
+    toPos: number;
+    trackFromPos: number;
+    trackToPos: number;
+}): SpanOverhang;
 /** How many cars fit in a span, from its drawn length — the derived capacity a
  * siding or an industry spot holds (never typed). */
 declare function carCapacity(fromPos: number, toPos: number, carLengthInches?: number): number;
@@ -2022,4 +2051,4 @@ declare function poseOverridesFromDoc(doc: ModuleSchematicDoc): Record<string, {
     heading: number;
 }>;
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, type GeometryType, type ImportedPart, type IndustryLabelMode, type IndustrySpot, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartSegment, RAIL_GAUGE_INCHES, type ReturnLoopGeometry, type ReturnLoopShape, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionFootprint, type SectionRelativePos, type SignalFacing, type SignalSide, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackPart, type TrackRole, type TurnoutClosure, type TurnoutKind, WHOLE_MODULE_SECTION_ID, asModuleSchematic, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTransition, carCapacity, checkEndplateWidth, deriveEndplatePoses, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partOutlineAtFrog, pastFrogInchesForSize, pathLengthInches, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, type FlexPiece, type FlexPieceEnd, type FrogCasting, type GeometryType, type ImportedPart, type IndustryLabelMode, type IndustrySpot, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OccupiedSpan, type OutlineFace, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartSegment, RAIL_GAUGE_INCHES, type ReturnLoopGeometry, type ReturnLoopShape, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionFootprint, type SectionRelativePos, type SignalFacing, type SignalSide, type SpanOverhang, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackPart, type TrackRole, type TurnoutClosure, type TurnoutKind, WHOLE_MODULE_SECTION_ID, asModuleSchematic, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTransition, carCapacity, checkEndplateWidth, deriveEndplatePoses, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partOutlineAtFrog, pastFrogInchesForSize, pathLengthInches, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize };

package/dist/index.js

@@ -575,6 +575,20 @@ function scaleFeetToInches(feet, ratio = N_SCALE_RATIO) {
   return feet * 12 / ratio;
 }
 var N_CAR_LENGTH_INCHES = 3.3;
+function spanOverhang(input) {
+  const lo = Math.min(input.fromPos, input.toPos);
+  const hi = Math.max(input.fromPos, input.toPos);
+  const tLo = Math.min(input.trackFromPos, input.trackToPos);
+  const tHi = Math.max(input.trackFromPos, input.trackToPos);
+  const before = Math.max(0, tLo - lo);
+  const after = Math.max(0, hi - tHi);
+  return {
+    beforeInches: before,
+    afterInches: after,
+    onTrackInches: Math.max(0, Math.min(hi, tHi) - Math.max(lo, tLo)),
+    overhangInches: before + after
+  };
+}
 function carCapacity(fromPos, toPos, carLengthInches = N_CAR_LENGTH_INCHES) {
   if (!(carLengthInches > 0)) return 0;
   return Math.max(0, Math.floor(Math.abs(toPos - fromPos) / carLengthInches));
@@ -1285,6 +1299,25 @@ var ATLAS_CODE55_N = [
       note: "scaled from the measured #7 by frog number \u2014 not measured"
     }
   },
+  {
+    // Will Gage, 2026-07-26: "2057 is 3.5, 2056 is 2.5" — the two Atlas Code 55
+    // wyes are different FROG NUMBERS, not a left/right pair of one part. The
+    // 2056 half of that confirms the entry above; this is the one we didn't have.
+    //
+    // No lead. The #2.5's is `derived` from a per-frog rule its own note records
+    // as refuted, so it rests on nothing — repeating that for a second part
+    // would be exactly how a number nobody checked becomes two. Without one,
+    // `leadInchesForSize` interpolates across the MEASURED parts at the wye's
+    // effective frog (3.5 × 2 = 7), which lands on the measured #7.
+    id: "atlas-c55-n-wye-35",
+    manufacturer: "Atlas",
+    line: "Code 55",
+    scale: "N",
+    name: "#3.5 Wye",
+    kind: "wye",
+    partNumbers: { single: "2057" },
+    frogNumber: 3.5
+  },
   {
     id: "atlas-c55-n-curved-21-15",
     manufacturer: "Atlas",
@@ -2327,6 +2360,6 @@ function poseOverridesFromDoc(doc) {
   return out;
 }
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, MAIN2_TRACK_ID, MAIN_TRACK_ID, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, RAIL_GAUGE_INCHES, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, WHOLE_MODULE_SECTION_ID, asModuleSchematic, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTransition, carCapacity, checkEndplateWidth, deriveEndplatePoses, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partOutlineAtFrog, pastFrogInchesForSize, pathLengthInches, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, CODE55_RAIL_HEIGHT_INCHES, DEFAULT_FLEX_PART_ID, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, FLEX_TRACK_PARTS, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, MAIN2_TRACK_ID, MAIN_TRACK_ID, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, RAIL_GAUGE_INCHES, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, WHOLE_MODULE_SECTION_ID, asModuleSchematic, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTransition, carCapacity, checkEndplateWidth, deriveEndplatePoses, divergeSideForHand, docToState, emptyEditorState, endplateCentreOffsetInches, endplateFaceSegments, endplateLead, endplateTrackOffsetInches, endplateWidthInches, flexPartFor, flexParts, flexPieces, flexUsage, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, leadInchesForSize, maxFlexPieceInches, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partOutlineAtFrog, pastFrogInchesForSize, pathLengthInches, poseNeedsManual, poseOverridesFromDoc, remapPos, resizeFlexPiece, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, spanOverhang, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutFacing, turnoutOccupiedSpan, turnoutPartForSize };
 //# sourceMappingURL=index.js.map
 //# sourceMappingURL=index.js.map