@willcgage/module-schematic 0.69.0 → 0.70.0

package/dist/index.d.cts

@@ -447,6 +447,10 @@ interface ModuleFootprintInput {
     /** A balloon / return loop — the centre-line turns back on itself, so its far
      * end is the THROAT, not an endplate; only endplate A's face is emitted (#loop). */
     loop?: boolean;
+    /** Axial endplate configs (A first, then B), same as
+     * {@link ModuleGeometryInput.endplateConfigs}. `"none"` at B means the module
+     * presents no far endplate, so no face is emitted there (#184/#191). */
+    endplateConfigs?: ("single" | "double" | "none" | null | undefined)[];
 }
 interface OutlineFace {
     /** The endplate face's two corners + midpoint (the track point). */
@@ -673,6 +677,27 @@ declare function checkEndplateWidth(input: {
     config?: TrackConfig | "none" | null;
     trackOffsetInches?: number | null;
 }): EndplateWidthIssue[];
+/**
+ * Whether a module presents NO far endplate — one conforming face only.
+ *
+ * ⭐ THE single definition. Three places had grown their own answer to this and
+ * drifted: `deriveEndplatePoses` (which knew about `dead_end` and `"none"`), the
+ * operations preview's end label, and `moduleFootprint`'s endplate faces — the
+ * last two using "is it a loop?" as a stand-in for "has it got two ends?", which
+ * was true until #184 and silently wrong after. Anything asking this must call
+ * THIS.
+ *
+ * Three ways to have one end, and they are genuinely different things: the
+ * geometry is a dead end; it's a balloon loop, whose far end is the throat and
+ * not a plate at all; or the owner said this end has no plate, which is how an
+ * *end of the line* or a *pocket* is authored — ordinary straight boards that
+ * simply stop, so no geometry type would ever say it for them.
+ */
+declare function hasNoFarEndplate(input: {
+    geometryType?: string | null;
+    loop?: boolean;
+    endplateConfigs?: ("single" | "double" | "none" | null | undefined)[];
+}): boolean;
 /**
  * Whether a doc is a balloon loop — **the authored flag, and only that**.
  *
@@ -1785,4 +1810,4 @@ declare function poseOverridesFromDoc(doc: ModuleSchematicDoc): Record<string, {
     heading: number;
 }>;
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CODE55_RAIL_HEIGHT_INCHES, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, type FrogCasting, type GeometryType, type ImportedPart, type IndustryLabelMode, type IndustrySpot, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OutlineFace, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartSegment, RAIL_GAUGE_INCHES, type ReturnLoopGeometry, type ReturnLoopShape, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionFootprint, type SectionRelativePos, type SignalFacing, type SignalSide, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackPart, type TrackRole, type TurnoutClosure, type TurnoutKind, WHOLE_MODULE_SECTION_ID, asModuleSchematic, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTransition, carCapacity, checkEndplateWidth, deriveEndplatePoses, divergeSideForHand, docToState, emptyEditorState, endplateFaceSegments, endplateLead, endplateTrackOffsetFor, endplateTrackOffsetInches, endplateWidthInches, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, leadInchesForSize, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partOutlineAtFrog, pastFrogInchesForSize, pathLengthInches, poseNeedsManual, poseOverridesFromDoc, remapPos, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutPartForSize };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CODE55_RAIL_HEIGHT_INCHES, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, type FrogCasting, type GeometryType, type ImportedPart, type IndustryLabelMode, type IndustrySpot, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OutlineFace, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartSegment, RAIL_GAUGE_INCHES, type ReturnLoopGeometry, type ReturnLoopShape, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionFootprint, type SectionRelativePos, type SignalFacing, type SignalSide, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackPart, type TrackRole, type TurnoutClosure, type TurnoutKind, WHOLE_MODULE_SECTION_ID, asModuleSchematic, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTransition, carCapacity, checkEndplateWidth, deriveEndplatePoses, divergeSideForHand, docToState, emptyEditorState, endplateFaceSegments, endplateLead, endplateTrackOffsetFor, endplateTrackOffsetInches, endplateWidthInches, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, leadInchesForSize, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partOutlineAtFrog, pastFrogInchesForSize, pathLengthInches, poseNeedsManual, poseOverridesFromDoc, remapPos, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutPartForSize };

package/dist/index.d.ts

@@ -447,6 +447,10 @@ interface ModuleFootprintInput {
     /** A balloon / return loop — the centre-line turns back on itself, so its far
      * end is the THROAT, not an endplate; only endplate A's face is emitted (#loop). */
     loop?: boolean;
+    /** Axial endplate configs (A first, then B), same as
+     * {@link ModuleGeometryInput.endplateConfigs}. `"none"` at B means the module
+     * presents no far endplate, so no face is emitted there (#184/#191). */
+    endplateConfigs?: ("single" | "double" | "none" | null | undefined)[];
 }
 interface OutlineFace {
     /** The endplate face's two corners + midpoint (the track point). */
@@ -673,6 +677,27 @@ declare function checkEndplateWidth(input: {
     config?: TrackConfig | "none" | null;
     trackOffsetInches?: number | null;
 }): EndplateWidthIssue[];
+/**
+ * Whether a module presents NO far endplate — one conforming face only.
+ *
+ * ⭐ THE single definition. Three places had grown their own answer to this and
+ * drifted: `deriveEndplatePoses` (which knew about `dead_end` and `"none"`), the
+ * operations preview's end label, and `moduleFootprint`'s endplate faces — the
+ * last two using "is it a loop?" as a stand-in for "has it got two ends?", which
+ * was true until #184 and silently wrong after. Anything asking this must call
+ * THIS.
+ *
+ * Three ways to have one end, and they are genuinely different things: the
+ * geometry is a dead end; it's a balloon loop, whose far end is the throat and
+ * not a plate at all; or the owner said this end has no plate, which is how an
+ * *end of the line* or a *pocket* is authored — ordinary straight boards that
+ * simply stop, so no geometry type would ever say it for them.
+ */
+declare function hasNoFarEndplate(input: {
+    geometryType?: string | null;
+    loop?: boolean;
+    endplateConfigs?: ("single" | "double" | "none" | null | undefined)[];
+}): boolean;
 /**
  * Whether a doc is a balloon loop — **the authored flag, and only that**.
  *
@@ -1785,4 +1810,4 @@ declare function poseOverridesFromDoc(doc: ModuleSchematicDoc): Record<string, {
     heading: number;
 }>;
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CODE55_RAIL_HEIGHT_INCHES, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, type FrogCasting, type GeometryType, type ImportedPart, type IndustryLabelMode, type IndustrySpot, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OutlineFace, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartSegment, RAIL_GAUGE_INCHES, type ReturnLoopGeometry, type ReturnLoopShape, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionFootprint, type SectionRelativePos, type SignalFacing, type SignalSide, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackPart, type TrackRole, type TurnoutClosure, type TurnoutKind, WHOLE_MODULE_SECTION_ID, asModuleSchematic, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTransition, carCapacity, checkEndplateWidth, deriveEndplatePoses, divergeSideForHand, docToState, emptyEditorState, endplateFaceSegments, endplateLead, endplateTrackOffsetFor, endplateTrackOffsetInches, endplateWidthInches, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, leadInchesForSize, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partOutlineAtFrog, pastFrogInchesForSize, pathLengthInches, poseNeedsManual, poseOverridesFromDoc, remapPos, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutPartForSize };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, type BenchworkPoint, type BranchConnector, CODE55_RAIL_HEIGHT_INCHES, type DimensionSource, type DrawCrossing, type DrawCrossover, type DrawIndustry, type DrawSignal, type DrawTrack, type DrawTurnout, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, type EditorBranch, type EditorControlPoint, type EditorCpSignal, type EditorCrossing, type EditorIndustry, type EditorState, type EditorTrack, type EditorTurnout, type EndplateBConfig, type EndplatePose, type EndplateTrackIssue, type EndplateWidthIssue, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, type FrogCasting, type GeometryType, type ImportedPart, type IndustryLabelMode, type IndustrySpot, MAIN2_TRACK_ID, MAIN_TRACK_ID, type ModuleFeatures, type ModuleFootprint, type ModuleFootprintInput, type ModuleGeometryInput, type ModuleSchematicDoc, type ModuleTrackRow, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, type OutlineFace, type PartAngle, type PartDimension, type PartEnd, type PartExtent, type PartSegment, RAIL_GAUGE_INCHES, type ReturnLoopGeometry, type ReturnLoopShape, type SchematicBlock, type SchematicControlPoint, type SchematicCrossing, type SchematicEndplate, type SchematicEndplateTrack, type SchematicIndustry, type SchematicSection, type SchematicSignal, type SchematicTrack, type SchematicTurnout, type SectionAdjacency, type SectionFootprint, type SectionRelativePos, type SignalFacing, type SignalSide, type StoredTrackPart, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, type TrackConfig, type TrackPart, type TrackRole, type TurnoutClosure, type TurnoutKind, WHOLE_MODULE_SECTION_ID, asModuleSchematic, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTransition, carCapacity, checkEndplateWidth, deriveEndplatePoses, divergeSideForHand, docToState, emptyEditorState, endplateFaceSegments, endplateLead, endplateTrackOffsetFor, endplateTrackOffsetInches, endplateWidthInches, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, leadInchesForSize, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partOutlineAtFrog, pastFrogInchesForSize, pathLengthInches, poseNeedsManual, poseOverridesFromDoc, remapPos, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutPartForSize };

package/dist/index.js

@@ -483,9 +483,10 @@ function moduleFootprint(input) {
   return {
     centerline,
     band: benchworkBand(centerline, widthA, widthB, offA, offB),
-    // A loop's centre-line ends at the throat, not a far endplate — keep only
-    // endplate A's face (the far face would be a spurious plate at the throat).
-    endplateFaces: input.loop ? endplateFaceSegments(centerline, widthA, widthB, offA, offB).slice(0, 1) : endplateFaceSegments(centerline, widthA, widthB, offA, offB),
+    // Only emit a face where the module actually presents one. A loop's
+    // centre-line ends at the THROAT, and an end of the line / pocket simply
+    // stops — a far face there is a plate the module hasn't got (#191).
+    endplateFaces: hasNoFarEndplate(input) ? endplateFaceSegments(centerline, widthA, widthB, offA, offB).slice(0, 1) : endplateFaceSegments(centerline, widthA, widthB, offA, offB),
     outline: sectionOutlines.length || !authored ? null : sampleBenchworkOutline(authored),
     // The donut hole, arc-sampled — only when there's a solid outline to punch it
     // out of (a sectioned module isn't a donut). Renderers cut it from `outline`.
@@ -531,6 +532,9 @@ function endplateWidthFor(widths, id) {
   const w = widths?.[id];
   return typeof w === "number" && w > 0 ? w : FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES;
 }
+function hasNoFarEndplate(input) {
+  return input.geometryType === "dead_end" || input.loop === true || input.endplateConfigs?.[1] === "none";
+}
 function isLoopDoc(doc) {
   return doc.loop === true;
 }
@@ -1991,7 +1995,7 @@ function deriveEndplatePoses(geo) {
       trackOffsets: offsetsFor(cfg(0), half)
     })
   );
-  const noB = geo.geometryType === "dead_end" || geo.loop === true || geo.endplateConfigs?.[1] === "none";
+  const noB = hasNoFarEndplate(geo);
   const end = sectionedEndPose({ sections: geo.sections });
   if (!noB && end) {
     poses.push(
@@ -2142,6 +2146,6 @@ function poseOverridesFromDoc(doc) {
   return out;
 }
 
-export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, CODE55_RAIL_HEIGHT_INCHES, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, MAIN2_TRACK_ID, MAIN_TRACK_ID, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, RAIL_GAUGE_INCHES, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, WHOLE_MODULE_SECTION_ID, asModuleSchematic, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTransition, carCapacity, checkEndplateWidth, deriveEndplatePoses, divergeSideForHand, docToState, emptyEditorState, endplateFaceSegments, endplateLead, endplateTrackOffsetFor, endplateTrackOffsetInches, endplateWidthInches, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, leadInchesForSize, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partOutlineAtFrog, pastFrogInchesForSize, pathLengthInches, poseNeedsManual, poseOverridesFromDoc, remapPos, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutPartForSize };
+export { ATLAS_CODE55_N, BUILT_IN_TRACK_PARTS, CODE55_RAIL_HEIGHT_INCHES, ENDPLATE_FASCIA_CLEAR_INCHES, ENDPLATE_LEAD_INCHES, FREEMO_ENDPLATE_TRACK_FASCIA_CLEARANCE_INCHES, FREEMO_ENDPLATE_WIDTH_MIN_INCHES, FREEMO_ENDPLATE_WIDTH_RECOMMENDED_INCHES, FREEMO_TRACK_SPACING_INCHES, MAIN2_TRACK_ID, MAIN_TRACK_ID, N_CAR_LENGTH_INCHES, N_SCALE_RATIO, RAIL_GAUGE_INCHES, TIE_HALF_LENGTH_INCHES, TURNOUT_LEAD_INCHES_PER_FROG, WHOLE_MODULE_SECTION_ID, asModuleSchematic, benchworkBand, benchworkOutline, buildCrossover, buildPassingSiding, buildTransition, carCapacity, checkEndplateWidth, deriveEndplatePoses, divergeSideForHand, docToState, emptyEditorState, endplateFaceSegments, endplateLead, endplateTrackOffsetFor, endplateTrackOffsetInches, endplateWidthInches, frogCasting, frogNumberFromName, fromSectionRelative, geometryTurnDegrees, hasNoFarEndplate, importedPartToTrackPart, inchesToScaleFeet, isLoopDoc, isTransitionTurnout, leadInchesForSize, mergeImportedParts, mergeStoredParts, moduleCenterline, moduleFeatures, moduleFootprint, moduleLengthFromSections, moduleSections, nextId, parseXtpLibrary, partExtent, partExtentForSize, partOutlineAtFrog, pastFrogInchesForSize, pathLengthInches, poseNeedsManual, poseOverridesFromDoc, remapPos, returnLoop, sampleBenchworkOutline, samplePartSegments, samplePath, scaleFeetToInches, sectionAdjacency, sectionBand, sectionBreaksFromSections, sectionComponents, sectionFootprints, sectionNeighbours, sectionSpans, sectionSpansOrWhole, sectionedCenterline, sectionedEndPose, sliceCenterline, stateToDoc, storedPartToTrackPart, toSectionRelative, trackMeetsEndplateIssues, trackPart, trackPath, turnoutClosure, turnoutPartForSize };
 //# sourceMappingURL=index.js.map
 //# sourceMappingURL=index.js.map