@warlock.js/core 5.29.0 → 5.31.0

package/esm/errors/error-codes.mjs

@@ -0,0 +1,634 @@
+//#region ../../packages/core/src/errors/error-codes.ts
+/** Base URL of the error-code reference; each code is an anchor on that page. */
+const ERROR_CODES_DOCS_URL = "https://warlock.js.org/v/latest/core/cli/error-codes/";
+/** The registry, keyed by code. */
+const ERROR_CODES = {
+	WL1001: {
+		code: "WL1001",
+		area: "config",
+		category: "code",
+		title: "A required config section is missing",
+		fix: "Add the missing file under src/config/ (for example src/config/app.ts) exporting the section.",
+		skill: "configure-app"
+	},
+	WL1002: {
+		code: "WL1002",
+		area: "config",
+		category: "code",
+		title: "No JWT signing secret is configured",
+		fix: "Run `warlock jwt.generate` (writes JWT_SECRET to .env) and read it as auth.accessToken.secret in src/config/auth.ts.",
+		skill: "configure-app"
+	},
+	WL1003: {
+		code: "WL1003",
+		area: "config",
+		category: "code",
+		title: "The rate-limit store cannot use the configured cache driver",
+		fix: "Use a redis, pg or memory cache driver for http.rateLimit store \"cache\", or set store: \"memory\".",
+		skill: "configure-app",
+		errorNames: ["UnsupportedRateLimitDriverError"]
+	},
+	WL1004: {
+		code: "WL1004",
+		area: "config",
+		category: "code",
+		title: "An http.csp directive value is invalid",
+		fix: "Fix the directive value named in the message in your http config; quotes must balance and values may not contain ';'.",
+		skill: "configure-app",
+		errorNames: ["InvalidCspDirectiveError"]
+	},
+	WL1005: {
+		code: "WL1005",
+		area: "config",
+		category: "code",
+		title: "The uploads.images configuration is invalid",
+		fix: "Correct the uploads.images variant settings named in the message.",
+		skill: "upload-file",
+		errorNames: ["ImageVariantsConfigError"]
+	},
+	WL1006: {
+		code: "WL1006",
+		area: "config",
+		category: "code",
+		title: "warlock.config.ts sets a build option the builder refuses",
+		fix: "Remove the named option from the build block of warlock.config.ts; change tsconfig.json instead.",
+		skill: "run-app",
+		errorNames: ["ForbiddenBuildOptionError"]
+	},
+	WL1007: {
+		code: "WL1007",
+		area: "config",
+		category: "code",
+		title: "A locale dictionary file cannot be parsed",
+		fix: "Fix the key named in the message in the locales.json file it names.",
+		skill: "use-localization",
+		errorNames: ["LocaleDictionaryError"]
+	},
+	WL1008: {
+		code: "WL1008",
+		area: "config",
+		category: "code",
+		title: "A locale outside app.localeCodes was requested",
+		fix: "Add the locale to app.localeCodes in src/config/app.ts, or pass a configured locale.",
+		skill: "use-localization",
+		errorNames: ["UnknownLocaleError"]
+	},
+	WL1009: {
+		code: "WL1009",
+		area: "config",
+		category: "code",
+		title: "warlock.config.ts > connectors was refused",
+		fix: "Give every connector in warlock.config.ts a unique name that is not a built-in connector name.",
+		skill: "add-connector"
+	},
+	WL2001: {
+		code: "WL2001",
+		area: "boot",
+		category: "code",
+		title: "An app module failed to load",
+		fix: "Open the file named in the message and fix the error it throws on import; its routes and listeners are missing until then.",
+		skill: "warlock-doctor",
+		errorNames: ["ModuleLoadError"]
+	},
+	WL2002: {
+		code: "WL2002",
+		area: "boot",
+		category: "code",
+		title: "The app's source files could not be discovered",
+		fix: "Run the command from the project root and check that src/ exists and is readable.",
+		skill: "warlock-doctor"
+	},
+	WL2003: {
+		code: "WL2003",
+		area: "boot",
+		category: "code",
+		title: "A connector failed to boot",
+		fix: "Read the connector's message; it usually names the config value or package it needs.",
+		skill: "add-connector"
+	},
+	WL2004: {
+		code: "WL2004",
+		area: "boot",
+		category: "code",
+		title: "A container key was read before it was registered",
+		fix: "Register the key (container.set) before reading it, or read it after the connector that sets it has booted.",
+		skill: "use-app-context",
+		errorNames: ["ContainerKeyMissingError"]
+	},
+	WL2005: {
+		code: "WL2005",
+		area: "boot",
+		category: "code",
+		title: "A boot precondition failed",
+		fix: "Fix the condition named in the message; restarting does not help until it changes.",
+		skill: "run-app",
+		errorNames: ["BootPreconditionError"]
+	},
+	WL2006: {
+		code: "WL2006",
+		area: "boot",
+		category: "code",
+		title: "Storage was used before the storage connector ran",
+		fix: "Add src/config/storage.ts; in a custom command add \"storage\" to preload.connectors.",
+		skill: "store-file",
+		errorNames: ["StorageNotInitializedError"]
+	},
+	WL2007: {
+		code: "WL2007",
+		area: "boot",
+		category: "code",
+		title: "A configured driver's package is not installed",
+		fix: "Install the package named in the message (for example `pnpm add sharp`), or stop configuring the driver.",
+		skill: "update-packages"
+	},
+	WL3001: {
+		code: "WL3001",
+		area: "routing",
+		category: "code",
+		title: "A route name is already taken",
+		fix: "Rename one of the two routes with the \"name\" route option; pages and API routes share one namespace.",
+		skill: "register-route",
+		errorNames: ["RouteNameTakenError"]
+	},
+	WL3002: {
+		code: "WL3002",
+		area: "routing",
+		category: "code",
+		title: "A route points at a controller method that does not exist",
+		fix: "Fix the [controller, action] pair: the action must be a method on the controller.",
+		skill: "register-route"
+	},
+	WL3003: {
+		code: "WL3003",
+		area: "routing",
+		category: "code",
+		title: "A URL was built for a route name that is not registered",
+		fix: "Check the name passed to router.route(); `warlock routes --name <part>` lists the registered names.",
+		skill: "warlock-routes"
+	},
+	WL3004: {
+		code: "WL3004",
+		area: "routing",
+		category: "code",
+		title: "A URL was built without one of the route's path parameters",
+		fix: "Pass every :param of the route path when building the URL.",
+		skill: "warlock-routes"
+	},
+	WL3005: {
+		code: "WL3005",
+		area: "routing",
+		category: "code",
+		title: "Route modules loaded but registered no routes",
+		fix: "Make sure routes.ts calls router.get/post/... at module level and is not wrapped in an unused function.",
+		skill: "register-route"
+	},
+	WL3006: {
+		code: "WL3006",
+		area: "routing",
+		category: "code",
+		title: "A handler uses the v4 (request, response) signature",
+		fix: "Rewrite the handler as async ({ request, response }) => { ... }.",
+		skill: "create-controller"
+	},
+	WL4001: {
+		code: "WL4001",
+		area: "validation",
+		category: "code",
+		title: "A validation schema cannot be described as JSON Schema",
+		fix: "Use Seal validators with a static shape for validation.schema/params; custom validate middleware is not described.",
+		skill: "validate-input"
+	},
+	WL5001: {
+		code: "WL5001",
+		area: "http",
+		category: "code",
+		title: "A cookie was read but the cookie plugin is not registered",
+		fix: "Register @fastify/cookie on the server before reading cookies by name.",
+		skill: "send-response",
+		errorNames: ["CookieJarUnavailableError"]
+	},
+	WL5002: {
+		code: "WL5002",
+		area: "http",
+		category: "code",
+		title: "An app route claims a health-probe path",
+		fix: "Move the app route, or rename the probe with http.health.path / http.health.readinessPath.",
+		skill: "health-checks"
+	},
+	WL5003: {
+		code: "WL5003",
+		area: "http",
+		category: "code",
+		title: "Health probes are enabled but not registered",
+		fix: "Check that the http connector booted and that nothing removed the probe routes.",
+		skill: "health-checks"
+	},
+	WL5004: {
+		code: "WL5004",
+		area: "http",
+		category: "code",
+		title: "Devtools recorded no timeline for the traced request",
+		fix: "Keep http.requestId enabled (its echoed header is how the request is found) and retry; a path under the devtools prefix is never recorded.",
+		skill: "warlock-trace"
+	},
+	WL6001: {
+		code: "WL6001",
+		area: "database",
+		category: "code",
+		title: "A seeder depends on a seeder that is not registered",
+		fix: "Fix the dependsOn name, or register the missing seeder.",
+		skill: "write-seeder",
+		errorNames: ["UnknownSeederDependencyError"]
+	},
+	WL6002: {
+		code: "WL6002",
+		area: "database",
+		category: "code",
+		title: "Seeder dependencies form a cycle",
+		fix: "Remove one dependsOn edge from the cycle printed in the message.",
+		skill: "write-seeder",
+		errorNames: ["SeederDependencyCycleError"]
+	},
+	WL7001: {
+		code: "WL7001",
+		area: "cli",
+		category: "code",
+		title: "A boolean CLI option received a value it cannot read",
+		fix: "Pass true/false/1/0/yes/no, or the flag on its own for true.",
+		skill: "write-cli-command",
+		errorNames: ["CliOptionValueError"]
+	},
+	WL7002: {
+		code: "WL7002",
+		area: "cli",
+		category: "code",
+		title: "Generated code imports a package the app does not declare",
+		fix: "Add the named package to the app's dependencies, or import it through @warlock.js/core.",
+		skill: "run-app",
+		errorNames: ["UndeclaredGeneratedImportError"]
+	},
+	WL7003: {
+		code: "WL7003",
+		area: "cli",
+		category: "code",
+		title: "A command needs an optional package that is not installed",
+		fix: "Install the packages named in the message as dev dependencies (warlock mcp needs @warlock.js/ai-tools and @warlock.js/ai).",
+		skill: "warlock-mcp"
+	},
+	WL7004: {
+		code: "WL7004",
+		area: "cli",
+		category: "code",
+		title: "warlock mcp was asked to listen off loopback without a token",
+		fix: "Pass --token (or set WARLOCK_MCP_TOKEN) when --host is not 127.0.0.1, ::1 or localhost, or keep the default loopback host.",
+		skill: "warlock-mcp"
+	},
+	WL7005: {
+		code: "WL7005",
+		area: "cli",
+		category: "code",
+		title: "An MCP tool that writes files was called on a read-only server",
+		fix: "Restart the server with --allow-writes to let generate tools write; without it they only return the diff.",
+		skill: "warlock-mcp"
+	},
+	WL7101: {
+		code: "WL7101",
+		area: "cli",
+		category: "code",
+		title: "TypeScript reports a type error",
+		fix: "Fix the type error at the reported position; the TypeScript code (TS1234) is in `rule`.",
+		skill: "warlock-check"
+	},
+	WL7102: {
+		code: "WL7102",
+		area: "cli",
+		category: "code",
+		title: "tsconfig.json is missing or invalid",
+		fix: "Fix tsconfig.json at the project root; the message names the problem.",
+		skill: "warlock-check"
+	},
+	WL7201: {
+		code: "WL7201",
+		area: "cli",
+		category: "code",
+		title: "The linter reports an error",
+		fix: "Fix the lint error at the reported position; the rule id is in `rule`.",
+		skill: "warlock-check"
+	},
+	WL7202: {
+		code: "WL7202",
+		area: "cli",
+		category: "code",
+		title: "The linter reports a warning",
+		fix: "Fix the warning, or change the rule's severity in the lint config if it does not apply.",
+		skill: "warlock-check"
+	},
+	WL7301: {
+		code: "WL7301",
+		area: "cli",
+		category: "code",
+		title: "A test failed",
+		fix: "Run the test file alone, read the assertion message and fix the code or the test.",
+		skill: "warlock-check"
+	},
+	WL7302: {
+		code: "WL7302",
+		area: "cli",
+		category: "code",
+		title: "A test file failed before its tests ran",
+		fix: "Fix the import or setup error named in the message; none of the file's tests ran.",
+		skill: "warlock-check"
+	},
+	WL7401: {
+		code: "WL7401",
+		area: "cli",
+		category: "code",
+		title: "The agent board is not initialized",
+		fix: "Run `warlock board init` at the project root first.",
+		skill: "warlock-board"
+	},
+	WL7402: {
+		code: "WL7402",
+		area: "cli",
+		category: "code",
+		title: "A board item does not exist",
+		fix: "Run `warlock board status` to list the item ids.",
+		skill: "warlock-board"
+	},
+	WL7403: {
+		code: "WL7403",
+		area: "cli",
+		category: "code",
+		title: "A board item cannot move to the requested state",
+		fix: "Use one of the next states listed in the message; `warlock board status <id>` shows the item's current state.",
+		skill: "warlock-board"
+	},
+	WL7404: {
+		code: "WL7404",
+		area: "cli",
+		category: "code",
+		title: "No board message arrived before the watch timed out",
+		fix: "Run `warlock board watch` again, or raise --timeout.",
+		skill: "warlock-board"
+	},
+	WL7501: {
+		code: "WL7501",
+		area: "cli",
+		category: "code",
+		title: "AGENTS.md has malformed generated-section markers",
+		fix: "Keep one `<!-- warlock:generated:start -->` line followed by one `<!-- warlock:generated:end -->` line, or remove both.",
+		skill: "warlock-agents-md"
+	},
+	WL8001: {
+		code: "WL8001",
+		area: "environment",
+		category: "environment",
+		title: "The Node.js version is not supported",
+		fix: "Switch to a Node.js version that satisfies the engines range in the message (for example with nvm).",
+		skill: "update-packages"
+	},
+	WL8002: {
+		code: "WL8002",
+		area: "environment",
+		category: "environment",
+		title: "A tool the project is configured to use is not installed",
+		fix: "Install the tool named in the message (pnpm install), or remove its config file.",
+		skill: "warlock-check"
+	},
+	WL8003: {
+		code: "WL8003",
+		area: "environment",
+		category: "environment",
+		title: "A service the code needs is unreachable",
+		fix: "Start the service named in the message (database, Redis, ...) or point the config at a running one.",
+		skill: "warlock-check"
+	},
+	WL8004: {
+		code: "WL8004",
+		area: "environment",
+		category: "environment",
+		title: "A port is already in use",
+		fix: "Stop whatever listens on the port, or use another port (port 0 in tests).",
+		skill: "run-app",
+		errorNames: ["PortInUseError"]
+	},
+	WL8005: {
+		code: "WL8005",
+		area: "environment",
+		category: "environment",
+		title: "esbuild's native binary is not installed",
+		fix: "Run `pnpm approve-builds`, then reinstall dependencies without skipping install scripts.",
+		skill: "run-app",
+		errorNames: ["EsbuildBinaryMissingError"]
+	},
+	WL8006: {
+		code: "WL8006",
+		area: "environment",
+		category: "environment",
+		title: "Git cannot list the changed files",
+		fix: "Run inside a git repository with git on PATH, or run the command without --changed.",
+		skill: "warlock-check"
+	},
+	WL8007: {
+		code: "WL8007",
+		area: "environment",
+		category: "environment",
+		title: "A tool crashed, timed out or ran out of memory",
+		fix: "Re-run the step; if it repeats, raise the memory limit (NODE_OPTIONS=--max-old-space-size) or use --changed.",
+		skill: "warlock-check"
+	},
+	WL8008: {
+		code: "WL8008",
+		area: "environment",
+		category: "environment",
+		title: "The dev server is not running",
+		fix: "Start `warlock dev` in this project, or pass --url with the address of a running dev server.",
+		skill: "warlock-trace"
+	},
+	WL8009: {
+		code: "WL8009",
+		area: "environment",
+		category: "environment",
+		title: "Devtools is not running in the dev server",
+		fix: "Install it with `warlock add devtools` and restart `warlock dev`; devtools answers loopback requests in development only.",
+		skill: "warlock-trace"
+	},
+	WL9001: {
+		code: "WL9001",
+		area: "convention",
+		category: "code",
+		title: "An auto-loaded file is imported",
+		fix: "Remove the import: routes.ts, main.ts, worker.ts and events/ files are loaded by the framework.",
+		skill: "warlock-conventions"
+	},
+	WL9002: {
+		code: "WL9002",
+		area: "convention",
+		category: "code",
+		title: "An import path ends in .js",
+		fix: "Drop the .js extension from the import path.",
+		skill: "warlock-conventions"
+	},
+	WL9003: {
+		code: "WL9003",
+		area: "convention",
+		category: "code",
+		title: "A relative import reaches into another module",
+		fix: "Import across modules through the app/<module>/... alias instead of ../../.",
+		skill: "warlock-conventions"
+	},
+	WL9004: {
+		code: "WL9004",
+		area: "convention",
+		category: "code",
+		title: "tsconfig.json enables legacy experimentalDecorators",
+		fix: "Remove \"experimentalDecorators\": true from tsconfig.json; Cascade uses standard decorators.",
+		skill: "lower-stage3-decorators"
+	},
+	WL9005: {
+		code: "WL9005",
+		area: "convention",
+		category: "code",
+		title: "`request.all()` is passed to a query, a service or inApp()",
+		fix: "Give the route a validation schema and pass `request.validated()`, which holds only the fields the schema accepted (mass assignment otherwise).",
+		skill: "warlock-conventions"
+	},
+	WL9006: {
+		code: "WL9006",
+		area: "convention",
+		category: "code",
+		title: "A mutating route has no auth guard and is not marked public",
+		fix: "Register the POST/PUT/PATCH/DELETE route inside `guarded()` (or with auth middleware), or pass `{ public: true }` if it is meant to be open.",
+		skill: "warlock-conventions"
+	},
+	WL9007: {
+		code: "WL9007",
+		area: "convention",
+		category: "code",
+		title: "A redirect or link target comes from request input",
+		fix: "Wrap the target in `safeRedirect()` (server, @warlock.js/core) or `safeRedirectTarget()` (pages, @warlock.js/web), or check it with `isSafeRedirect()` first.",
+		skill: "warlock-conventions"
+	},
+	WL9008: {
+		code: "WL9008",
+		area: "convention",
+		category: "code",
+		title: "A raw email, credential or request body is logged",
+		fix: "Pass the value through `maskEmail()`, `redact()`, `escapeLogValue()` or `request.toLogSnapshot()`, or log it under a key the logger censors (`token`, `password`, ...).",
+		skill: "warlock-conventions"
+	},
+	WL9009: {
+		code: "WL9009",
+		area: "convention",
+		category: "code",
+		title: "A regex with an unbounded quantifier runs on request input",
+		fix: "Bound the repetition (`{1,256}` instead of `+` or `*`) or cap the input length before matching.",
+		skill: "warlock-conventions"
+	},
+	WL9010: {
+		code: "WL9010",
+		area: "convention",
+		category: "code",
+		title: "`await` on a synchronous log call",
+		fix: "Remove the `await`: `log.info()` and its siblings return the logger; `await log.flush()` waits for delivery.",
+		skill: "warlock-conventions"
+	},
+	WL9011: {
+		code: "WL9011",
+		area: "convention",
+		category: "code",
+		title: "A file defines more than one controller",
+		fix: "Move each extra controller into its own `<name>.controller.ts` file.",
+		skill: "warlock-conventions"
+	},
+	WL9012: {
+		code: "WL9012",
+		area: "convention",
+		category: "code",
+		title: "A tagged union uses `kind` as its discriminator",
+		fix: "Rename the discriminator to `type` and update the code that narrows on it.",
+		skill: "warlock-conventions"
+	},
+	WL9101: {
+		code: "WL9101",
+		area: "convention",
+		category: "code",
+		title: "A module still uses the deprecated utils/locales.ts",
+		fix: "Run `warlock doctor --fix` to convert it to locales.json, or convert it by hand.",
+		skill: "use-localization"
+	},
+	WL9102: {
+		code: "WL9102",
+		area: "convention",
+		category: "code",
+		title: "package.json version and CHANGELOG.md disagree",
+		fix: "Add a CHANGELOG.md heading for the package.json version, or fix the version.",
+		skill: "warlock-doctor"
+	},
+	WL9103: {
+		code: "WL9103",
+		area: "convention",
+		category: "code",
+		title: "CHANGELOG.md is missing or has no version heading",
+		fix: "Add a CHANGELOG.md with a `## x.y.z` heading for the current version.",
+		skill: "warlock-doctor"
+	}
+};
+/** Whether `value` is a registered code. */
+function isWarlockErrorCode(value) {
+	return typeof value === "string" && Object.prototype.hasOwnProperty.call(ERROR_CODES, value);
+}
+/**
+* The registry entry for a code, or `undefined` for an unknown one. Case and
+* surrounding whitespace are ignored, so `explainErrorCode(" wl3001 ")` works.
+*/
+function explainErrorCode(code) {
+	const normalized = code.trim().toUpperCase();
+	return isWarlockErrorCode(normalized) ? ERROR_CODES[normalized] : void 0;
+}
+/** The docs URL of a code: the reference page with the code as its anchor. */
+function errorCodeDocsUrl(code) {
+	return `${ERROR_CODES_DOCS_URL}#${code.toLowerCase()}`;
+}
+/** Node errno codes that mean "the machine", mapped to the Warlock code. */
+const SYSTEM_ERROR_CODES = {
+	ECONNREFUSED: "WL8003",
+	ENOTFOUND: "WL8003",
+	EHOSTUNREACH: "WL8003",
+	ETIMEDOUT: "WL8003",
+	EADDRINUSE: "WL8004",
+	ERR_OUT_OF_MEMORY: "WL8007"
+};
+function readStringProperty(value, key) {
+	const property = Reflect.get(value, key);
+	return typeof property === "string" ? property : void 0;
+}
+/**
+* The Warlock code of a thrown value, or `undefined` when it has none.
+*
+* Reads, in order: a registered `code` property (framework errors carry one);
+* the error's `name`, for classes whose `code` property already means
+* something else (`PortInUseError.code` is Node's `"EADDRINUSE"`); a Node
+* system errno such as `ECONNREFUSED`; then the same checks on `cause`. Reading
+* by name rather than `instanceof` keeps the answer right when two copies of
+* core are loaded.
+*/
+function errorCodeOf(error) {
+	const seen = /* @__PURE__ */ new Set();
+	let current = error;
+	while (typeof current === "object" && current !== null && !seen.has(current)) {
+		seen.add(current);
+		const code = readStringProperty(current, "code");
+		if (isWarlockErrorCode(code)) return code;
+		const name = readStringProperty(current, "name");
+		if (name) {
+			for (const definition of Object.values(ERROR_CODES)) if (definition.errorNames?.includes(name) && isWarlockErrorCode(definition.code)) return definition.code;
+		}
+		if (code && SYSTEM_ERROR_CODES[code]) return SYSTEM_ERROR_CODES[code];
+		current = Reflect.get(current, "cause");
+	}
+}
+
+//#endregion
+export { ERROR_CODES, ERROR_CODES_DOCS_URL, errorCodeDocsUrl, errorCodeOf, explainErrorCode, isWarlockErrorCode };
+//# sourceMappingURL=error-codes.mjs.map