@wandelbots/nova-api 25.7.0-dev.36 → 25.7.0-dev.38

package/v1/api.ts

@@ -20640,6 +20640,7 @@ export const GetDefaultLinkChainMotionGroupModelEnum = {
     FanucM900iB360E: 'FANUC_M900iB360E',
     FanucR2000iC125L: 'FANUC_R2000iC125L',
     FanucR2000iC210F: 'FANUC_R2000iC210F',
+    KukaDk5002: 'KUKA_DK500_2',
     KukaKr10R1100: 'KUKA_KR10_R1100',
     KukaKr10R11002: 'KUKA_KR10_R1100_2',
     KukaKr10R900: 'KUKA_KR10_R900',

package/v2/api.d.ts

@@ -6423,7 +6423,7 @@ export declare const ControllerApiAxiosParamCreator: (configuration?: Configurat
      */
     listRobotControllers: (cell: string, options?: RawAxiosRequestConfig) => Promise<RequestArgs>;
     /**
-     * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
+     * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > `setDefaultMode` enables the robot controller to stay in control mode to keep the motors activated. > This allows for faster execution of sequential movements as no mode switches are required.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
      * @summary Set Default Mode
      * @param {string} cell Unique identifier addressing a cell in all API calls.
      * @param {string} controller Unique identifier to address a controller in the cell.
@@ -6565,7 +6565,7 @@ export declare const ControllerApiFp: (configuration?: Configuration) => {
      */
     listRobotControllers(cell: string, options?: RawAxiosRequestConfig): Promise<(axios?: AxiosInstance, basePath?: string) => AxiosPromise<Array<string>>>;
     /**
-     * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
+     * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > `setDefaultMode` enables the robot controller to stay in control mode to keep the motors activated. > This allows for faster execution of sequential movements as no mode switches are required.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
      * @summary Set Default Mode
      * @param {string} cell Unique identifier addressing a cell in all API calls.
      * @param {string} controller Unique identifier to address a controller in the cell.
@@ -6707,7 +6707,7 @@ export declare const ControllerApiFactory: (configuration?: Configuration, baseP
      */
     listRobotControllers(cell: string, options?: RawAxiosRequestConfig): AxiosPromise<Array<string>>;
     /**
-     * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
+     * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > `setDefaultMode` enables the robot controller to stay in control mode to keep the motors activated. > This allows for faster execution of sequential movements as no mode switches are required.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
      * @summary Set Default Mode
      * @param {string} cell Unique identifier addressing a cell in all API calls.
      * @param {string} controller Unique identifier to address a controller in the cell.
@@ -6861,7 +6861,7 @@ export declare class ControllerApi extends BaseAPI {
      */
     listRobotControllers(cell: string, options?: RawAxiosRequestConfig): Promise<import("axios").AxiosResponse<string[], any>>;
     /**
-     * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
+     * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > `setDefaultMode` enables the robot controller to stay in control mode to keep the motors activated. > This allows for faster execution of sequential movements as no mode switches are required.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
      * @summary Set Default Mode
      * @param {string} cell Unique identifier addressing a cell in all API calls.
      * @param {string} controller Unique identifier to address a controller in the cell.

package/v2/api.js

@@ -3138,7 +3138,7 @@ export const ControllerApiAxiosParamCreator = function (configuration) {
             };
         },
         /**
-         * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
+         * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > `setDefaultMode` enables the robot controller to stay in control mode to keep the motors activated. > This allows for faster execution of sequential movements as no mode switches are required.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
          * @summary Set Default Mode
          * @param {string} cell Unique identifier addressing a cell in all API calls.
          * @param {string} controller Unique identifier to address a controller in the cell.
@@ -3474,7 +3474,7 @@ export const ControllerApiFp = function (configuration) {
             return (axios, basePath) => createRequestFunction(localVarAxiosArgs, globalAxios, BASE_PATH, configuration)(axios, localVarOperationServerBasePath || basePath);
         },
         /**
-         * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
+         * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > `setDefaultMode` enables the robot controller to stay in control mode to keep the motors activated. > This allows for faster execution of sequential movements as no mode switches are required.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
          * @summary Set Default Mode
          * @param {string} cell Unique identifier addressing a cell in all API calls.
          * @param {string} controller Unique identifier to address a controller in the cell.
@@ -3659,7 +3659,7 @@ export const ControllerApiFactory = function (configuration, basePath, axios) {
             return localVarFp.listRobotControllers(cell, options).then((request) => request(axios, basePath));
         },
         /**
-         * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
+         * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > `setDefaultMode` enables the robot controller to stay in control mode to keep the motors activated. > This allows for faster execution of sequential movements as no mode switches are required.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
          * @summary Set Default Mode
          * @param {string} cell Unique identifier addressing a cell in all API calls.
          * @param {string} controller Unique identifier to address a controller in the cell.
@@ -3842,7 +3842,7 @@ export class ControllerApi extends BaseAPI {
         return ControllerApiFp(this.configuration).listRobotControllers(cell, options).then((request) => request(this.axios, this.basePath));
     }
     /**
-     * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
+     * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > `setDefaultMode` enables the robot controller to stay in control mode to keep the motors activated. > This allows for faster execution of sequential movements as no mode switches are required.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change.
      * @summary Set Default Mode
      * @param {string} cell Unique identifier addressing a cell in all API calls.
      * @param {string} controller Unique identifier to address a controller in the cell.

package/v2/api.ts

@@ -8392,7 +8392,7 @@ export const ControllerApiAxiosParamCreator = function (configuration?: Configur
             };
         },
         /**
-         * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change. 
+         * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > `setDefaultMode` enables the robot controller to stay in control mode to keep the motors activated. > This allows for faster execution of sequential movements as no mode switches are required.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change. 
          * @summary Set Default Mode
          * @param {string} cell Unique identifier addressing a cell in all API calls. 
          * @param {string} controller Unique identifier to address a controller in the cell.
@@ -8763,7 +8763,7 @@ export const ControllerApiFp = function(configuration?: Configuration) {
             return (axios, basePath) => createRequestFunction(localVarAxiosArgs, globalAxios, BASE_PATH, configuration)(axios, localVarOperationServerBasePath || basePath);
         },
         /**
-         * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change. 
+         * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > `setDefaultMode` enables the robot controller to stay in control mode to keep the motors activated. > This allows for faster execution of sequential movements as no mode switches are required.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change. 
          * @summary Set Default Mode
          * @param {string} cell Unique identifier addressing a cell in all API calls. 
          * @param {string} controller Unique identifier to address a controller in the cell.
@@ -8949,7 +8949,7 @@ export const ControllerApiFactory = function (configuration?: Configuration, bas
             return localVarFp.listRobotControllers(cell, options).then((request) => request(axios, basePath));
         },
         /**
-         * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change. 
+         * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > `setDefaultMode` enables the robot controller to stay in control mode to keep the motors activated. > This allows for faster execution of sequential movements as no mode switches are required.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change. 
          * @summary Set Default Mode
          * @param {string} cell Unique identifier addressing a cell in all API calls. 
          * @param {string} controller Unique identifier to address a controller in the cell.
@@ -9143,7 +9143,7 @@ export class ControllerApi extends BaseAPI {
     }
 
     /**
-     * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change. 
+     * Switch between monitor and control usage as default for a robot controller. Monitoring mode is used to read information from the robot controller and control mode is used to command the robot system. As long as the robot controller is connected via network monitoring mode is always possible. To switch to control mode the robot controller must be in `automatic` or `manual` operating mode and safety state \'normal\' or \'reduced\'. If the robot controller is in `manual` operating mode, you have manually confirm the control usage activation on the robot control panel. This manual confirmation can\'t be replaced with this API. Without manual confirmation the robot controller will stay in monitor mode.  The robot system will try to activate the required operation mode for the requested usage unless no active call requires a different mode.  > **NOTE** > > `setDefaultMode` enables the robot controller to stay in control mode to keep the motors activated. > This allows for faster execution of sequential movements as no mode switches are required.  > **NOTE** > > Some robot controllers prevent the external activation of automatic operating mode. In this case, changing the operating mode manually at the robot controller is mandatory.  > **NOTE** > > The current operation mode and safety state can be requested via [getCurrentRobotControllerState](getCurrentRobotControllerState).  If a mode change is not possible, the response lists reasons for the failed change. 
      * @summary Set Default Mode
      * @param {string} cell Unique identifier addressing a cell in all API calls. 
      * @param {string} controller Unique identifier to address a controller in the cell.