@walwal-harness/cli 6.0.5 → 6.1.1

package/scripts/harness-archive.sh

@@ -0,0 +1,123 @@
+#!/bin/bash
+# harness-archive.sh — 스프린트 종료 시 자동 아카이빙
+#
+# 동작:
+#   1. .harness/actions/ 의 스프린트 산출물을 .harness/archive/D-NNN/S-NNN/ 로 이동
+#   2. progress.json 의 sprint 상태를 초기화 (신규 dispatch 준비)
+#   3. dispatch.id 가 없으면 counter++ 로 새 dispatch 시작
+#
+# 유지되는 파일 (이동하지 않음):
+#   - .harness/gotchas/**, .harness/conventions/**, .harness/ref/**
+#   - .harness/config.json, .harness/memory.md
+#   - .harness/progress.json (초기화만)
+#
+# 호출 주체: harness-next.sh (next_agent="archive" 도달 시 자동)
+
+set -e
+
+SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
+source "$SCRIPT_DIR/lib/harness-render-progress.sh" 2>/dev/null || true
+
+PROJECT_ROOT="${1:-.}"
+PROJECT_ROOT="$(cd "$PROJECT_ROOT" && pwd)"
+
+PROGRESS="$PROJECT_ROOT/.harness/progress.json"
+ACTIONS_DIR="$PROJECT_ROOT/.harness/actions"
+ARCHIVE_ROOT="$PROJECT_ROOT/.harness/archive"
+
+if [ ! -f "$PROGRESS" ]; then
+  echo "[archive] ERROR: progress.json not found" >&2
+  exit 1
+fi
+
+command -v jq >/dev/null 2>&1 || { echo "[archive] ERROR: jq required" >&2; exit 1; }
+
+# ── Read current dispatch/sprint numbers ──
+dispatch_counter=$(jq -r '.dispatch.counter // 0' "$PROGRESS")
+dispatch_id=$(jq -r '.dispatch.id // empty' "$PROGRESS")
+sprint_num=$(jq -r '.sprint.number // 0' "$PROGRESS")
+
+# Ensure dispatch id exists (fallback for legacy progress.json without dispatch)
+if [ -z "$dispatch_id" ] || [ "$dispatch_id" = "null" ]; then
+  if [ "$dispatch_counter" -lt 1 ]; then
+    dispatch_counter=1
+  fi
+  dispatch_id=$(printf 'D-%03d' "$dispatch_counter")
+fi
+
+sprint_id=$(printf 'S-%03d' "$sprint_num")
+target_dir="$ARCHIVE_ROOT/$dispatch_id/$sprint_id"
+
+echo ""
+echo "  ── Archive ────────────────────────────"
+echo "  Dispatch : $dispatch_id"
+echo "  Sprint   : $sprint_id"
+echo "  Target   : ${target_dir#$PROJECT_ROOT/}"
+
+# ── Move actions/ contents into archive ──
+if [ -d "$ACTIONS_DIR" ] && [ "$(ls -A "$ACTIONS_DIR" 2>/dev/null)" ]; then
+  mkdir -p "$target_dir"
+  moved=0
+  for f in "$ACTIONS_DIR"/*; do
+    [ -e "$f" ] || continue
+    name="$(basename "$f")"
+    if [ -e "$target_dir/$name" ]; then
+      # Collision — suffix with timestamp to avoid overwrite
+      ts=$(date +%Y%m%d-%H%M%S)
+      mv "$f" "$target_dir/${name%.}.${ts}"
+    else
+      mv "$f" "$target_dir/"
+    fi
+    moved=$((moved + 1))
+  done
+  echo "  Moved    : $moved file(s)"
+else
+  echo "  Moved    : 0 file(s) (actions/ empty)"
+fi
+
+# ── Reset progress.json for next dispatch ──
+# - sprint → init
+# - agents → cleared
+# - artifacts → pending
+# - dispatch.id cleared (next dispatcher run will allocate new D-NNN)
+# - failure → cleared
+jq --arg now "$(date -u +%Y-%m-%dT%H:%M:%SZ)" '
+  .pipeline = null
+  | .dispatch.id = null
+  | .sprint = { number: 0, status: "init", retry_count: 0 }
+  | .current_agent = null
+  | .agent_status = "pending"
+  | .completed_agents = []
+  | .next_agent = "dispatcher"
+  | .workflow = { stage: "goal-intake", last_transition: null, loop_count: 0, last_reason: null }
+  | .task_sessions.current = { agent: null, id: null, path: null, source: null }
+  | .failure = { agent: null, location: null, message: null, retry_target: null }
+  | .meetings.active = []
+  | .meetings.current_id = null
+  | .meetings.current_record_path = null
+  | .meetings.requested_type = null
+  | .meetings.requested_reason = null
+  | .meetings.last_type = null
+  | .meetings.last_reason = null
+  | .meetings.last_decision = null
+  | .meetings.decision = { owner: null, action_type: null, rationale: null, evidence: [], drift_classification: null, source_path: null }
+  | .service_ops.requested_mode = null
+  | .service_ops.drift_classification = null
+  | .service_ops.evidence = []
+  | (.artifacts // {}) as $a
+  | .artifacts = ($a | with_entries(
+      if (.value | type) == "object"
+      then .value = { status: "pending", updated_by: null, updated_at: null }
+      else .
+      end))
+  | .updated_at = $now
+' "$PROGRESS" > "${PROGRESS}.tmp" && mv "${PROGRESS}.tmp" "$PROGRESS"
+
+# ── Clear handoff so next session starts fresh ──
+HANDOFF="$PROJECT_ROOT/.harness/handoff.json"
+echo '{}' > "$HANDOFF"
+
+echo "  Status   : archived, progress reset"
+echo ""
+echo "  ✓ 다음 요청은 새로운 dispatch 로 시작합니다."
+echo ""

package/scripts/harness-dashboard-up.sh

@@ -0,0 +1,72 @@
+#!/usr/bin/env bash
+# walwal-harness — Brick Office dashboard launcher
+#
+# 처음 쓰는 사용자도 한 줄로 대시보드를 띄워볼 수 있게 만든 helper.
+# walwal-harness CLI 패키지에는 R3F + Next.js 무게 때문에 dashboard 가 미포함이고,
+# 본 스크립트가 git sparse-checkout 으로 apps/harness-dashboard/ 만 가져와서
+# 사용자 프로젝트 외부 (~/.walwal-harness/dashboard) 에 격리 설치 후 dev 실행한다.
+#
+# Usage:
+#   bash scripts/harness-dashboard-up.sh                 # install + dev (port 3001)
+#   bash scripts/harness-dashboard-up.sh --port 3050     # override port
+#   HARNESS_ROOT=/path/to/project bash ...               # explicit harness root
+set -euo pipefail
+
+REPO_URL="${WALWAL_HARNESS_REPO:-https://github.com/30eggis/walwal-harness.git}"
+DASHBOARD_PATH="apps/harness-dashboard"
+LOCAL_DIR="${HOME}/.walwal-harness/dashboard"
+PORT="${PORT:-3001}"
+
+while [[ $# -gt 0 ]]; do
+  case "$1" in
+    --port) PORT="$2"; shift 2 ;;
+    --reinstall) rm -rf "$LOCAL_DIR"; shift ;;
+    --help|-h)
+      sed -n '2,16p' "$0"
+      exit 0 ;;
+    *) echo "[brick-office] unknown arg: $1" >&2; exit 2 ;;
+  esac
+done
+
+if [[ -z "${HARNESS_ROOT:-}" ]]; then
+  HARNESS_ROOT="$(pwd)"
+fi
+if [[ ! -d "${HARNESS_ROOT}/.harness" ]]; then
+  echo "[brick-office] FAIL: ${HARNESS_ROOT} 에 .harness/ 가 없습니다."
+  echo "                먼저 'npx walwal-harness' 로 초기화하세요."
+  exit 3
+fi
+
+echo "[brick-office] HARNESS_ROOT = ${HARNESS_ROOT}"
+echo "[brick-office] dashboard 격리 경로 = ${LOCAL_DIR}"
+
+if [[ ! -d "${LOCAL_DIR}/${DASHBOARD_PATH}" ]]; then
+  echo "[brick-office] 첫 실행 — git sparse-checkout 으로 dashboard 만 가져옵니다 (~5MB)."
+  mkdir -p "${LOCAL_DIR}"
+  cd "${LOCAL_DIR}"
+  git init -q
+  git remote add origin "${REPO_URL}" 2>/dev/null || true
+  git config core.sparseCheckout true
+  echo "${DASHBOARD_PATH}/" > .git/info/sparse-checkout
+  git fetch --depth=1 origin main -q
+  git checkout main -q
+  echo "[brick-office] 다운로드 완료."
+fi
+
+cd "${LOCAL_DIR}/${DASHBOARD_PATH}"
+
+if [[ ! -d node_modules ]]; then
+  echo "[brick-office] npm install (한 번만 실행, ~30s)..."
+  npm install --no-audit --no-fund --loglevel=error
+fi
+
+echo ""
+echo "╔══════════════════════════════════════════════════════════╗"
+echo "║  Brick Office — http://localhost:${PORT}"
+echo "║                                                          ║"
+echo "║  HARNESS_ROOT 이 가리키는 프로젝트의 .harness/ 상태를     ║"
+echo "║  실시간 (SSE) 시각화합니다. Ctrl+C 로 종료.              ║"
+echo "╚══════════════════════════════════════════════════════════╝"
+echo ""
+
+HARNESS_ROOT="${HARNESS_ROOT}" npm run dev:dashboard -- -p "${PORT}"