@volcengine/pulumi-volcenginecc 0.0.28 → 0.0.29

package/clb/getNlb.d.ts

@@ -18,39 +18,39 @@ export interface GetNlbArgs {
  */
 export interface GetNlbResult {
     /**
-     * NLB实例的访问日志信息。
+     * Access log information of the NLB instance.
      */
     readonly accessLog: outputs.clb.GetNlbAccessLog;
     /**
-     * NLB实例所属的账号ID。
+     * Account ID to which the NLB instance belongs.
      */
     readonly accountId: string;
     /**
-     * NLB实例的计费状态。Normal: 正常，FinancialLocked: 被锁定。
+     * Billing status of the NLB instance. Normal: normal, FinancialLocked: locked.
      */
     readonly billingStatus: string;
     /**
-     * NLB实例的计费类型。3：按使用量计费
+     * Billing type of the NLB instance. 3: pay-as-you-go
      */
     readonly billingType: number;
     /**
-     * NLB实例的创建时间。
+     * Creation time of the NLB instance.
      */
     readonly createdTime: string;
     /**
-     * NLB实例是否开启跨可用区转发能力。true（默认值）：开启。false：关闭。
+     * Whether the NLB instance has cross-availability zone forwarding enabled. true (default): enabled. false: disabled.
      */
     readonly crossZoneEnabled: boolean;
     /**
-     * NLB实例的描述。必须以字母、数字或中文开头，可包含以下特殊字符：英文逗号（,）、点（.）、下划线（_）、空格（ ）、等号（=）、中划线（-）、中文逗号（，）、中文句号（。）。长度限制为0 ～ 255个字符。该参数不传入，则默认为空字符串。
+     * Description of the NLB instance. Must start with a letter, number, or Chinese character and can include the following special characters: English comma (,), period (.), underscore (_), space ( ), equals sign (=), hyphen (-), Chinese comma (，), and Chinese period (。). Length limit: 0–255 characters. If this parameter is not provided, the default is an empty string.
      */
     readonly description: string;
     /**
-     * NLB实例的DNS地址。
+     * DNS address of the NLB instance.
      */
     readonly dnsName: string;
     /**
-     * NLB实例欠费关停时间。
+     * Time when the NLB instance is suspended due to overdue payment.
      */
     readonly expectedOverdueTime: string;
     /**
@@ -58,75 +58,75 @@ export interface GetNlbResult {
      */
     readonly id: string;
     /**
-     * NLB实例的IP地址类型。ipv4：IPv4版本。dualstack：双栈，即同时支持IPv4版本和IPv6版本。
+     * IP address type of the NLB instance. ipv4: IPv4 version. dualstack: dual stack, supports both IPv4 and IPv6 versions.
      */
     readonly ipAddressVersion: string;
     /**
-     * IPv4类型的共享带宽包ID。
+     * Shared bandwidth package ID for IPv4 type.
      */
     readonly ipv4BandwidthPackageId: string;
     /**
-     * NLB实例的IPv4网络类型。internet：公网类型。intranet：私网类型。
+     * IPv4 network type of the NLB instance. internet: public network type. intranet: private network type.
      */
     readonly ipv4NetworkType: string;
     /**
-     * IPv6类型的共享带宽包ID。
+     * Shared bandwidth package ID for IPv6 type.
      */
     readonly ipv6BandwidthPackageId: string;
     /**
-     * NLB实例的IPv6网络类型。internet：公网类型。intranet：私网类型。
+     * IPv6 network type of the NLB instance. internet: public network type. intranet: private network type.
      */
     readonly ipv6NetworkType: string;
     /**
-     * NLB实例ID。
+     * NLB instance ID.
      */
     readonly loadBalancerId: string;
     /**
-     * NLB实例的名称。
+     * Name of the NLB instance.
      */
     readonly loadBalancerName: string;
     /**
-     * 系统为NLB实例自动关联的托管安全组ID。
+     * Managed security group ID automatically associated with the NLB instance by the system.
      */
     readonly managedSecurityGroupId: string;
     /**
-     * NLB实例是否开启控制台上修改保护。NonProtection或空：关闭，允许通过控制台修改实例或删除实例。ConsoleProtection：开启，禁止通过控制台修改实例或删除实例。
+     * Whether modification protection is enabled for the NLB instance in the console. NonProtection or empty: disabled, allows modification or deletion of the instance via the console. ConsoleProtection: enabled, prevents modification or deletion of the instance via the console.
      */
     readonly modificationProtectionStatus: string;
     /**
-     * NLB实例被锁定的时间。参数BillingStatus为Normal时，本参数返回为空字符串。
+     * Time when the NLB instance is locked. If the BillingStatus parameter is Normal, this parameter returns an empty string.
      */
     readonly overdueTime: string;
     /**
-     * NLB实例所属项目的名称。
+     * Name of the project to which the NLB instance belongs.
      */
     readonly projectName: string;
     /**
-     * NLB实例的预期回收时间。参数BillingStatus为Normal时，本参数返回为空字符串。
+     * Expected reclamation time of the NLB instance. If the BillingStatus parameter is Normal, this parameter returns an empty string.
      */
     readonly reclaimedTime: string;
     /**
-     * NLB实例关联的安全组ID列表。
+     * List of security group IDs associated with the NLB instance.
      */
     readonly securityGroupIds: string[];
     /**
-     * NLB 实例的状态。Inactive：已停止。Active：运行中。Creating：创建中。Provisioning：创建中。仅调用API创建NLB实例时存在该状态。Configuring：配置中。Deleting：删除中。CreateFailed：创建失败。
+     * Status of the NLB instance. Inactive: stopped. Active: running. Creating: creating. Provisioning: creating (this status only appears when creating an NLB instance via API). Configuring: configuring. Deleting: deleting. CreateFailed: creation failed.
      */
     readonly status: string;
     /**
-     * NLB实例的标签信息。
+     * Tag information of the NLB instance.
      */
     readonly tags: outputs.clb.GetNlbTag[];
     /**
-     * NLB实例的更新时间。
+     * Update time of the NLB instance.
      */
     readonly updatedTime: string;
     /**
-     * NLB实例所属的VPC ID。
+     * VPC ID to which the NLB instance belongs.
      */
     readonly vpcId: string;
     /**
-     * NLB实例的可用区信息。
+     * Availability zone information for the NLB instance.
      */
     readonly zoneMappings: outputs.clb.GetNlbZoneMapping[];
 }

package/clb/getNlbListener.d.ts

@@ -18,31 +18,31 @@ export interface GetNlbListenerArgs {
  */
 export interface GetNlbListenerResult {
     /**
-     * TLS监听器服务器证书的ID，仅支持传入证书中心 SSL 证书。。
+     * TLS listener server certificate ID. Only SSL certificates from the certificate center are supported.
      */
     readonly certificateId: string;
     /**
-     * 监听器的连接超时时间（秒）。
+     * Listener connection timeout (seconds)
      */
     readonly connectionTimeout: number;
     /**
-     * 监听器的创建时间。
+     * Listener creation time
      */
     readonly createdTime: string;
     /**
-     * 监听器描述信息。
+     * Listener description
      */
     readonly description: string;
     /**
-     * 是否启用监听器。true：开启；false：关闭。
+     * Listener enabled: true (enabled); false (disabled)
      */
     readonly enabled: boolean;
     /**
-     * 全端口监听的结束端口，仅当Port为0时有效。
+     * End port for all-port listening. Valid only when Port is 0.
      */
     readonly endPort: number;
     /**
-     * 后端实例健康检查响应信息。
+     * Backend instance health check response information
      */
     readonly healths: outputs.clb.GetNlbListenerHealth[];
     /**
@@ -50,47 +50,47 @@ export interface GetNlbListenerResult {
      */
     readonly id: string;
     /**
-     * 监听器唯一标识。
+     * Listener unique identifier
      */
     readonly listenerId: string;
     /**
-     * 监听器名称。
+     * Listener name
      */
     readonly listenerName: string;
     /**
-     * 负载均衡实例ID。
+     * Load balancer instance ID
      */
     readonly loadBalancerId: string;
     /**
-     * 监听器接收请求的端口，0表示启用全端口监听。
+     * Port on which the listener receives requests. 0 indicates all-port listening is enabled.
      */
     readonly port: number;
     /**
-     * 监听协议类型。TCP,UDP,TLS
+     * Listener protocol type: TCP, UDP, TLS
      */
     readonly protocol: string;
     /**
-     * TLS 安全策略ID，支持系统安全策略和自定义安全策略。系统安全策略取值：.tls*cipher*policy*1*0.tls*cipher*policy*1*1.tls*cipher*policy*1*2.tls*cipher*policy*1*2*strict.tls*cipher*policy*1*2*strict*with*1_3.自定义安全策略：输入自定义安全策略 ID。当Protocol为TLS 时，该参数为必填。。
+     * TLS security policy ID. Supports both system security policies and custom security policies. System security policy values: .tls*cipher*policy*1*0 .tls*cipher*policy*1*1 .tls*cipher*policy*1*2 .tls*cipher*policy*1*2*strict .tls*cipher*policy*1*2*strict*with*1_3. For custom security policies, enter the custom security policy ID. This parameter is required when Protocol is TLS.
      */
     readonly securityPolicyId: string;
     /**
-     * 监听器关联的服务器组ID。
+     * Server group ID associated with the listener
      */
     readonly serverGroupId: string;
     /**
-     * 全端口监听的起始端口，仅当Port为0时有效。
+     * Start port for all-port listening. Valid only when Port is 0.
      */
     readonly startPort: number;
     /**
-     * 监听器的状态。
+     * Listener status
      */
     readonly status: string;
     /**
-     * 资源标签。
+     * Resource tags
      */
     readonly tags: outputs.clb.GetNlbListenerTag[];
     /**
-     * 监听器最近操作时间。
+     * Listener's most recent operation time
      */
     readonly updatedTime: string;
 }

package/clb/getNlbSecurityPolicy.d.ts

@@ -18,15 +18,15 @@ export interface GetNlbSecurityPolicyArgs {
  */
 export interface GetNlbSecurityPolicyResult {
     /**
-     * TLS 安全策略所属的账号ID。
+     * Account ID associated with the TLS security policy
      */
     readonly accountId: string;
     /**
-     * TLS自定义安全策略的加密套件，不同的TLS协议版本支持的加密套件如下：TLSv1.0 & TLSv1.1：ECDHE-ECDSA-AES128-SHA，ECDHE-ECDSA-AES256-SHA，ECDHE-RSA-AES128-SHA，ECDHE-RSA-AES256-SHA，AES128-SHA，AES256-SHA，DES-CBC3-SHA。TLSv1.2：ECDHE-ECDSA-AES128-GCM-SHA256，ECDHE-ECDSA-AES256-GCM-SHA384，ECDHE-ECDSA-AES128-SHA256，ECDHE-ECDSA-AES256-SHA384，ECDHE-RSA-AES128-GCM-SHA256，ECDHE-RSA-AES256-GCM-SHA384，ECDHE-RSA-AES128-SHA256，ECDHE-RSA-AES256-SHA384，AES128-GCM-SHA256，AES256-GCM-SHA384，AES128-SHA256，AES256-SHA256。TLSv1.3：TLS*CHACHA20*POLY1305*SHA256，TLS*AES*256*GCM*SHA384，TLS*AES*128*GCM*SHA256，TLS*AES*128*CCM*8*SHA256，TLS*AES*128*CCM*SHA256，TLS*SM4*GCM*SM3，TLS*SM4*CCM*SM3。当传入此参数时，需要传入待支持的全部加密套件，不支持通过此接口仅新增/删除加密套件。仅传入Ciphers.N，未传入TlsVersions.N，则依据当前监听器支持的TLS 协议版本和请求中传入的加密套件做校验。传入TlsVersions.N和Ciphers.N，则依据请求中传入的TLS 协议版本和加密套件做校验。TLS*SM4*GCM*SM3和TLS*SM4*CCM*SM3两个加密套件正在邀测中，如需试用，请联系客户经理。
+     * Cipher suites for the TLS custom security policy. Supported cipher suites for different TLS protocol versions are as follows: TLSv1.0 & TLSv1.1: ECDHE-ECDSA-AES128-SHA, ECDHE-ECDSA-AES256-SHA, ECDHE-RSA-AES128-SHA, ECDHE-RSA-AES256-SHA, AES128-SHA, AES256-SHA, DES-CBC3-SHA. TLSv1.2: ECDHE-ECDSA-AES128-GCM-SHA256, ECDHE-ECDSA-AES256-GCM-SHA384, ECDHE-ECDSA-AES128-SHA256, ECDHE-ECDSA-AES256-SHA384, ECDHE-RSA-AES128-GCM-SHA256, ECDHE-RSA-AES256-GCM-SHA384, ECDHE-RSA-AES128-SHA256, ECDHE-RSA-AES256-SHA384, AES128-GCM-SHA256, AES256-GCM-SHA384, AES128-SHA256, AES256-SHA256. TLSv1.3: TLS*CHACHA20*POLY1305*SHA256, TLS*AES*256*GCM*SHA384, TLS*AES*128*GCM*SHA256, TLS*AES*128*CCM*8*SHA256, TLS*AES*128*CCM*SHA256, TLS*SM4*GCM*SM3, TLS*SM4*CCM*SM3. When specifying this parameter, you must provide all supported cipher suites. Adding or removing cipher suites individually is not supported via this interface. If only Ciphers.N is provided and TlsVersions.N is not, validation is based on the TLS protocol versions supported by the current listener and the cipher suites specified in the request. If both TlsVersions.N and Ciphers.N are provided, validation is based on the TLS protocol versions and cipher suites specified in the request. TLS*SM4*GCM*SM3 and TLS*SM4*CCM*SM3 are currently in pilot testing. To request access, please contact your account manager
      */
     readonly ciphers: string[];
     /**
-     * 创建时间。
+     * Creation time
      */
     readonly createdTime: string;
     /**
@@ -34,35 +34,35 @@ export interface GetNlbSecurityPolicyResult {
      */
     readonly id: string;
     /**
-     * TLS自定义安全策略所属项目的名称。不传则默认为defaul。
+     * Name of the project to which the TLS custom security policy belongs. If not specified, defaults to default
      */
     readonly projectName: string;
     /**
-     * TLS 安全策略关联的监听器。
+     * Listener associated with the TLS security policy
      */
     readonly relatedListenerIds: string[];
     /**
-     * 安全策略ID。
+     * Security policy ID
      */
     readonly securityPolicyId: string;
     /**
-     * 安全策略名称。必须以字母、数字或中文开头，可包含以下特殊字符：点（.）、下划线（_）和中划线（-）；长度限制为1 ～ 128个字符；该参数不传入，则默认为策略ID。
+     * Security policy name. Must start with a letter, number, or Chinese character, and can include the following special characters: period (.), underscore (_), and hyphen (-). Length must be between 1 and 128 characters. If this parameter is not specified, defaults to the policy ID
      */
     readonly securityPolicyName: string;
     /**
-     * TLS 自定义安全策略状态。Creating：创建中。Configuring：配置中。Active：正常。Deleting：删除中。
+     * TLS custom security policy status. Creating: Being created. Configuring: Being configured. Active: Active. Deleting: Being deleted.
      */
     readonly status: string;
     /**
-     * 标签列表。
+     * Tag list
      */
     readonly tags: outputs.clb.GetNlbSecurityPolicyTag[];
     /**
-     * 更新TLS自定义安全策略的TLS 协议版本。取值：TLSv1.0，TLSv1.1，TLSv1.2，TLSv1.3。当传入此参数时，需要传入待支持的全部TLS版本，不支持通过此接口仅新增/删除TLS协议版本。仅传入TlsVersions.N，未传入Ciphers.N，则依据请求中传入的TLS协议版本和当前监听器支持的加密套件做校验。传入TlsVersions.N和Ciphers.N，则依据请求中传入的TLS协议版本和加密套件做校验。
+     * Update the TLS protocol versions for the TLS custom security policy. Valid values: TLSv1.0, TLSv1.1, TLSv1.2, TLSv1.3. When specifying this parameter, you must provide all supported TLS versions. Adding or removing TLS protocol versions individually is not supported via this interface. If only TlsVersions.N is provided and Ciphers.N is not, validation is based on the TLS protocol versions in the request and the cipher suites supported by the current listener. If both TlsVersions.N and Ciphers.N are provided, validation is based on the TLS protocol versions and cipher suites specified in the request
      */
     readonly tlsVersions: string[];
     /**
-     * 更新时间。
+     * Update time
      */
     readonly updatedTime: string;
 }

package/clb/getNlbServerGroup.d.ts

@@ -18,35 +18,35 @@ export interface GetNlbServerGroupArgs {
  */
 export interface GetNlbServerGroupResult {
     /**
-     * 账号ID。
+     * Account ID
      */
     readonly accountId: string;
     /**
-     * 是否开启全端口转发。
+     * Enable all-port forwarding
      */
     readonly anyPortEnabled: boolean;
     /**
-     * 是否开启放通后端安全组功能。仅参数Type为“instance”时，可以配置此参数。
+     * Enable backend security group pass-through. This parameter can only be configured when Type is 'instance'.
      */
     readonly bypassSecurityGroupEnabled: boolean;
     /**
-     * 是否开启连接优雅中断。
+     * Enable graceful connection termination.
      */
     readonly connectionDrainEnabled: boolean;
     /**
-     * 连接优雅中断超时时间，取值范围为0～900秒。参数ConnectionDrainEnabled为“true”时，该参数为必填。
+     * Connection graceful shutdown timeout, range: 0–900 seconds. If ConnectionDrainEnabled is 'true', this parameter is required.
      */
     readonly connectionDrainTimeout: number;
     /**
-     * 后端服务器组的创建时间。
+     * Backend server group creation time
      */
     readonly createdTime: string;
     /**
-     * 后端服务器组的描述,服务器组的描述。必须以字母、数字或中文开头，可包含以下特殊字符：英文逗号（,）、点号（.）、下划线（_）、空格（ ）、等号（=）、中划线（-）、中文逗号（，）、中文句号（。）长度限制为0 ～ 255个字符。该参数不传入，则默认为空字符串。
+     * Description of the backend server group, description of the server group. Must start with a letter, number, or Chinese character, and can include the following special characters: English comma (,), period (.), underscore (_), space ( ), equals sign (=), hyphen (-), Chinese comma (，), Chinese period（。）. Length limit: 0–255 characters. If this parameter is not provided, the default is an empty string.
      */
     readonly description: string;
     /**
-     * 健康检查相关参数。
+     * Health check parameters
      */
     readonly healthCheck: outputs.clb.GetNlbServerGroupHealthCheck;
     /**
@@ -54,79 +54,79 @@ export interface GetNlbServerGroupResult {
      */
     readonly id: string;
     /**
-     * 服务器组的IP地址类型。取值如下：ipv4（默认值）：表示该服务器组仅支持添加IPv4类型的后端服务器。ipv6：表示该服务器组仅支持添加IPv6类型的后端服务器。
+     * IP address type of the server group. Options: ipv4 (default): The server group only supports adding IPv4 type backend servers. ipv6: The server group only supports adding IPv6 type backend servers.
      */
     readonly ipAddressVersion: string;
     /**
-     * 是否开启源地址保持。
+     * Enable source address persistence
      */
     readonly preserveClientIpEnabled: boolean;
     /**
-     * 项目名称。
+     * Project name
      */
     readonly projectName: string;
     /**
-     * NLB转发流量到后端服务器时使用的通信协议。取值如下：TCP。UDP。
+     * Communication protocol used by NLB to forward traffic to backend servers. Options: TCP. UDP.
      */
     readonly protocol: string;
     /**
-     * 是否开启Proxy-Protocol协议。取值如下：off（默认值）：关闭。standard：开启。NLB将通过Proxy-Protocol协议携带客户端源IP地址转发至后端服务器，还需要在后端服务器上配置Proxy-Protocol。
+     * Enable Proxy-Protocol. Available values: off (default): disabled. standard: enabled. NLB forwards the client source IP address to the backend server via Proxy-Protocol. Proxy-Protocol must also be configured on the backend server.
      */
     readonly proxyProtocolType: string;
     /**
-     * 服务器组关联的NLB实例。
+     * NLB instance associated with the server group.
      */
     readonly relatedLoadBalancerIds: string[];
     /**
-     * NLB转发流量时遵循的规则。取值如下：wrr（默认值）：加权轮询，权重值越高的后端服务器，被轮询到的次数（概率）越高。wlc：加权最小连接数，在最少连接数的基础上，根据后端服务器的不同处理能力，给每个服务器分配不同的权重，使其能够接受相应权值数的服务请求。sh：源地址哈希，基于源IP地址的一致性哈希，相同的源地址会调度到相同的后端服务器。
+     * Rules followed by NLB when forwarding traffic. Options: wrr (default): Weighted round robin. Backend servers with higher weights are selected more frequently (higher probability). wlc: Weighted least connections. Based on the least number of connections, assigns different weights to backend servers according to their processing capabilities, allowing each server to handle a corresponding number of service requests. sh: Source address hash. Uses consistent hashing based on the source IP address; requests from the same source address are routed to the same backend server.
      */
     readonly scheduler: string;
     /**
-     * 服务器组中后端服务器的数量。
+     * Number of backend servers in the server group.
      */
     readonly serverCount: number;
     /**
-     * 服务器组ID。
+     * Server group ID
      */
     readonly serverGroupId: string;
     /**
-     * 服务器组名称, 必须以字母、数字或中文开头，可包含以下特殊字符：点号（.）、下划线（_）和中划线（-）。限制为1 ～ 128个字符。该参数不传入，则默认为服务器组ID。
+     * Server group name. Must start with a letter, number, or Chinese character, and can include the following special characters: period (.), underscore (_), and hyphen (-). Limit: 1–128 characters. If not specified, defaults to the server group ID
      */
     readonly serverGroupName: string;
     /**
-     * 服务器组中待添加后端服务器的信息。
+     * Information about backend servers to be added to the server group
      */
     readonly servers: outputs.clb.GetNlbServerGroupServer[];
     /**
-     * 是否开启会话保持。
+     * Enable session persistence.
      */
     readonly sessionPersistenceEnabled: boolean;
     /**
-     * 会话保持的超时时间，取值范围为1～3600秒，默认1000秒。
+     * Session persistence timeout. Range: 1–3600 seconds, default: 1000 seconds
      */
     readonly sessionPersistenceTimeout: number;
     /**
-     * 服务器组的状态。
+     * Server group status
      */
     readonly status: string;
     /**
-     * 标签。
+     * Tag
      */
     readonly tags: outputs.clb.GetNlbServerGroupTag[];
     /**
-     * 是否开启清除TCP/HTTP/HTTPS报文的timestamp（即时间戳）的功能。
+     * Enable removal of TCP/HTTP/HTTPS packet timestamps
      */
     readonly timestampRemoveEnabled: boolean;
     /**
-     * 服务器组的类型。取值如下：instance（默认值）：服务器类型。支持添加云服务器实例和已绑定云服务器实例的辅助网卡作为后端服务器。ip：IP地址类型。支持添加任何网络可达的VPC或IDC中的服务器作为后端服务器。
+     * Server group type. Available values: instance (default): server type. Supports adding cloud server instances and auxiliary network interfaces bound to cloud server instances as backend servers. ip: IP address type. Supports adding any network-accessible server in a VPC or IDC as a backend server.
      */
     readonly type: string;
     /**
-     * 后端服务器组的更新时间。
+     * Last update time of the backend server group.
      */
     readonly updatedTime: string;
     /**
-     * 服务器组所属私有网络的ID。
+     * ID of the private network to which the server group belongs
      */
     readonly vpcId: string;
 }

package/clb/getRule.d.ts

@@ -18,15 +18,15 @@ export interface GetRuleArgs {
  */
 export interface GetRuleResult {
     /**
-     * 转发规则的转发动作。取值如下：Forward：转发至。Redirect：重定向至。
+     * Forwarding rule action. Options: Forward: Forward to. Redirect: Redirect to.
      */
     readonly actionType: string;
     /**
-     * 转发规则的描述，默认值为空字符串。规范如下：必须以字母、数字或中文开头，可包含字母、数字、中文及以下特殊字符：英文逗号（,）、点号（.）、下划线（_）、空格（ ）、等号（=）、中划线（-）、中文逗号（，）、中文句号（。）。长度限制为0 ～ 255个字符。
+     * Description of the forwarding rule. Default value is an empty string. Specifications: Must start with a letter, number, or Chinese character. Can include letters, numbers, Chinese characters, and the following special characters: comma (,), period (.), underscore (_), space ( ), equals sign (=), hyphen (-), Chinese comma (，), Chinese period (。). Length must be between 0 and 255 characters.
      */
     readonly description: string;
     /**
-     * 转发规则的域名。
+     * Domain name of the forwarding rule.
      */
     readonly domain: string;
     /**
@@ -34,27 +34,27 @@ export interface GetRuleResult {
      */
     readonly id: string;
     /**
-     * 监听器ID。
+     * Listener ID.
      */
     readonly listenerId: string;
     /**
-     * 重定向相关配置信息。
+     * Redirection-related configuration information.
      */
     readonly redirectConfig: outputs.clb.GetRuleRedirectConfig;
     /**
-     * 转发规则ID。
+     * Forwarding rule ID.
      */
     readonly ruleId: string;
     /**
-     * 转发规则关联的后端服务器组的ID。
+     * ID of the backend server group associated with the forwarding rule.
      */
     readonly serverGroupId: string;
     /**
-     * 标签列表。
+     * Tag list.
      */
     readonly tags: outputs.clb.GetRuleTag[];
     /**
-     * 转发规则的URL。
+     * URL of the forwarding rule.
      */
     readonly url: string;
 }

package/clb/getServerGroup.d.ts

@@ -18,19 +18,19 @@ export interface GetServerGroupArgs {
  */
 export interface GetServerGroupResult {
     /**
-     * 后端服务器组的IP地址类型。ipv4：后端服务器组为IPv4类型。ipv6：后端服务器组为IPv6类型。
+     * IP address type of the backend server group. ipv4: The backend server group is of IPv4 type. ipv6: The backend server group is of IPv6 type.
      */
     readonly addressIpVersion: string;
     /**
-     * 是否开启全端口转发。on：开启全端口转发。off：关闭全端口转发。
+     * Whether to enable all-port forwarding. on: enable all-port forwarding. off: disable all-port forwarding.
      */
     readonly anyPortEnabled: string;
     /**
-     * 后端服务器组的创建时间。
+     * Creation time of the backend server group.
      */
     readonly createTime: string;
     /**
-     * 后端服务器组的描述。必须以字母、数字或中文开头，可包含字母、数字、中文及以下特殊字符：英文逗号（,）、点号（.）、下划线（_）、空格（ ）、等号（=）、中划线（-）、中文逗号（，）、中文句号（。）。长度限制为0 ～ 255个符。不填则默认为空字符串。
+     * Description of the backend server group. Must start with a letter, number, or Chinese character, and can include letters, numbers, Chinese characters, and the following special characters: English comma (,), period (.), underscore (_), space ( ), equals sign (=), hyphen (-), Chinese comma (，), and Chinese period (。). Length limit: 0–255 characters. If not specified, defaults to an empty string.
      */
     readonly description: string;
     /**
@@ -38,35 +38,35 @@ export interface GetServerGroupResult {
      */
     readonly id: string;
     /**
-     * 后端服务器组关联的监听器信息。
+     * Listener information associated with the backend server group.
      */
     readonly listeners: outputs.clb.GetServerGroupListener[];
     /**
-     * 后端服务器组所属的CLB实例ID。
+     * CLB instance ID to which the backend server group belongs.
      */
     readonly loadBalancerId: string;
     /**
-     * 后端服务器组的ID。
+     * Backend server group ID.
      */
     readonly serverGroupId: string;
     /**
-     * 后端服务器组的名称。必须以字母、数字或中文开头，可包含字母、数字、中文及以下特殊字符：点号（.）、下划线（_）和中划线（-）。限制为1 ～ 128个字符。不填默认为后端服务器组ID。
+     * Name of the backend server group. Must start with a letter, number, or Chinese character, and can include letters, numbers, Chinese characters, and the following special characters: period (.), underscore (_), and hyphen (-). Limit: 1–128 characters. If not specified, defaults to the backend server group ID.
      */
     readonly serverGroupName: string;
     /**
-     * 后端服务器组中服务器的信息。
+     * Information about servers in the backend server group.
      */
     readonly servers: outputs.clb.GetServerGroupServer[];
     /**
-     * 标签信息。
+     * Tag information.
      */
     readonly tags: outputs.clb.GetServerGroupTag[];
     /**
-     * 后端服务器组的类型。instance：表示该后端服务器组只能添加云服务器的主网卡或辅助网卡作为后端服务器。ip：表示该后端服务器组只能添加IP地址作为后端服务器。
+     * Type of the backend server group. instance: This backend server group can only add the primary or auxiliary network card of a cloud server as backend servers. ip: This backend server group can only add IP addresses as backend servers.
      */
     readonly type: string;
     /**
-     * 后端服务器组的最近操作时间。
+     * Last operation time of the backend server group.
      */
     readonly updateTime: string;
 }