@voipsdk/react-native-voipcloud 1.0.1 → 1.0.2

package/ios/VoipCloud.xcframework/ios-arm64/Headers/pjnath/config.h

@@ -0,0 +1,596 @@
+/* 
+ * Copyright (C) 2008-2011 Teluu Inc. (http://www.teluu.com)
+ * Copyright (C) 2003-2008 Benny Prijono <benny@prijono.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA 
+ */
+#ifndef __PJNATH_CONFIG_H__
+#define __PJNATH_CONFIG_H__
+
+
+/**
+ * @file config.h
+ * @brief Compile time settings
+ */
+
+#include <pj/types.h>
+
+/**
+ * @defgroup PJNATH_CONFIG Compile-time configurations
+ * @brief Various compile time settings
+ * @ingroup PJNATH_STUN_BASE
+ * @{
+ */
+
+
+/* **************************************************************************
+ * GENERAL
+ */
+
+/**
+ * The log level for PJNATH error display.
+ *
+ * default 1
+ */
+#ifndef PJNATH_ERROR_LEVEL
+#   define PJNATH_ERROR_LEVEL                       1
+#endif
+
+
+/* **************************************************************************
+ * STUN CONFIGURATION
+ */
+
+/**
+ * Maximum number of attributes in the STUN packet (for the new STUN
+ * library).
+ *
+ * Default: 16
+ */
+#ifndef PJ_STUN_MAX_ATTR
+#   define PJ_STUN_MAX_ATTR                         16
+#endif
+
+/**
+ * The default initial STUN round-trip time estimation (the RTO value
+ * in RFC 3489-bis), in miliseconds. 
+ * This value is used to control the STUN request 
+ * retransmit time. The initial value of retransmission interval 
+ * would be set to this value, and will be doubled after each
+ * retransmission.
+ */
+#ifndef PJ_STUN_RTO_VALUE
+#   define PJ_STUN_RTO_VALUE                        100
+#endif
+
+
+/**
+ * The STUN transaction timeout value, in miliseconds.
+ * After the last retransmission is sent and if no response is received 
+ * after this time, the STUN transaction will be considered to have failed.
+ *
+ * The default value is 16x RTO (as per RFC 3489-bis).
+ */
+#ifndef PJ_STUN_TIMEOUT_VALUE
+#   define PJ_STUN_TIMEOUT_VALUE                    (16 * PJ_STUN_RTO_VALUE)
+#endif
+
+
+/**
+ * Maximum number of STUN transmission count.
+ *
+ * Default: 7 (as per RFC 3489-bis)
+ */
+#ifndef PJ_STUN_MAX_TRANSMIT_COUNT
+#   define PJ_STUN_MAX_TRANSMIT_COUNT               7
+#endif
+
+
+/**
+ * Duration to keep response in the cache, in msec.
+ *
+ * Default: 10000 (as per RFC 3489-bis)
+ */
+#ifndef PJ_STUN_RES_CACHE_DURATION
+#   define PJ_STUN_RES_CACHE_DURATION               10000
+#endif
+
+
+/**
+ * Maximum size of STUN message.
+ */
+#ifndef PJ_STUN_MAX_PKT_LEN
+#   define PJ_STUN_MAX_PKT_LEN                      800
+#endif
+
+
+/**
+ * Default STUN port as defined by RFC 3489.
+ */
+#define PJ_STUN_PORT                                3478
+
+
+/**
+ * Padding character for string attributes.
+ *
+ * Default: ASCII 0
+ */
+#ifndef PJ_STUN_STRING_ATTR_PAD_CHR
+#   define PJ_STUN_STRING_ATTR_PAD_CHR              0
+#endif
+
+
+/**
+ * Enable pre-RFC3489bis-07 style of STUN MESSAGE-INTEGRITY and FINGERPRINT
+ * calculation. By default this should be disabled since the calculation is
+ * not backward compatible with current STUN specification.
+ */
+#ifndef PJ_STUN_OLD_STYLE_MI_FINGERPRINT
+#   define PJ_STUN_OLD_STYLE_MI_FINGERPRINT         0
+#endif
+
+
+/* **************************************************************************
+ * STUN TRANSPORT CONFIGURATION
+ */
+
+/**
+ * The packet buffer size for the STUN transport.
+ */
+#ifndef PJ_STUN_SOCK_PKT_LEN
+#   define PJ_STUN_SOCK_PKT_LEN                     2000
+#endif
+
+
+/**
+ * The duration of the STUN keep-alive period, in seconds.
+ */
+#ifndef PJ_STUN_KEEP_ALIVE_SEC
+#   define PJ_STUN_KEEP_ALIVE_SEC                   15
+#endif
+
+
+/* **************************************************************************
+ * TURN CONFIGURATION
+ */
+
+/**
+ * Maximum DNS SRV entries to be processed in the DNS SRV response
+ */
+#ifndef PJ_TURN_MAX_DNS_SRV_CNT
+#   define PJ_TURN_MAX_DNS_SRV_CNT                  4
+#endif
+
+
+/**
+ * Maximum TURN packet size to be supported.
+ */
+#ifndef PJ_TURN_MAX_PKT_LEN
+#   define PJ_TURN_MAX_PKT_LEN                      3000
+#endif
+
+
+/**
+ * The TURN permission lifetime setting. This value should be taken from the
+ * TURN protocol specification.
+ */
+#ifndef PJ_TURN_PERM_TIMEOUT
+#   define PJ_TURN_PERM_TIMEOUT                     300
+#endif
+
+
+/**
+ * The TURN channel binding lifetime. This value should be taken from the
+ * TURN protocol specification.
+ */
+#ifndef PJ_TURN_CHANNEL_TIMEOUT
+#   define PJ_TURN_CHANNEL_TIMEOUT                  600
+#endif
+
+
+/**
+ * Number of seconds to refresh the permission/channel binding before the 
+ * permission/channel binding expires. This value should be greater than 
+ * PJ_TURN_PERM_TIMEOUT setting.
+ */
+#ifndef PJ_TURN_REFRESH_SEC_BEFORE
+#   define PJ_TURN_REFRESH_SEC_BEFORE               60
+#endif
+
+
+/**
+ * The TURN session timer heart beat interval. When this timer occurs, the 
+ * TURN session will scan all the permissions/channel bindings to see which
+ * need to be refreshed.
+ */
+#ifndef PJ_TURN_KEEP_ALIVE_SEC
+#   define PJ_TURN_KEEP_ALIVE_SEC                   15
+#endif
+
+/**
+ * Maximum number of TCP data connection to peer(s) that a TURN client can
+ * open/accept for each TURN allocation (or TURN control connection).
+ */
+#ifndef PJ_TURN_MAX_TCP_CONN_CNT
+#   define PJ_TURN_MAX_TCP_CONN_CNT                 8
+#endif
+
+/* **************************************************************************
+ * ICE CONFIGURATION
+ */
+
+/**
+ * Maximum number of ICE candidates.
+ *
+ * Default: 16
+ */
+#ifndef PJ_ICE_MAX_CAND
+#   define PJ_ICE_MAX_CAND                          16
+#endif
+
+
+/**
+ * Maximum number of candidates for each ICE stream transport component.
+ *
+ * Default: 8
+ */
+#ifndef PJ_ICE_ST_MAX_CAND
+#   define PJ_ICE_ST_MAX_CAND                       8
+#endif
+
+
+/**
+ * Maximum number of STUN transports for each ICE stream transport component.
+ * Valid values are 1 - 64.
+ *
+ * Default: 2
+ */
+#ifndef PJ_ICE_MAX_STUN
+#   define PJ_ICE_MAX_STUN                          2
+#endif
+
+
+/**
+ * Maximum number of TURN transports for each ICE stream transport component.
+ * Valid values are 1 - 64.
+ *
+ * Default: 2
+ */
+#ifndef PJ_ICE_MAX_TURN
+#   define PJ_ICE_MAX_TURN                          3
+#endif
+
+
+/**
+ * The number of bits to represent component IDs. This will affect
+ * the maximum number of components (PJ_ICE_MAX_COMP) value.
+ */
+#ifndef PJ_ICE_COMP_BITS
+#   define PJ_ICE_COMP_BITS                         1
+#endif
+
+
+/**
+ * Maximum number of ICE components.
+ */
+#define PJ_ICE_MAX_COMP                             (1<<PJ_ICE_COMP_BITS)
+
+/**
+ * Use the priority value according to the ice-draft.
+ */
+#ifndef PJNATH_ICE_PRIO_STD
+#   define PJNATH_ICE_PRIO_STD                      1
+#endif
+
+
+/**
+ * The number of bits to represent candidate type preference.
+ */
+#ifndef PJ_ICE_CAND_TYPE_PREF_BITS
+#   if PJNATH_ICE_PRIO_STD
+#       define PJ_ICE_CAND_TYPE_PREF_BITS           8
+#   else
+#       define PJ_ICE_CAND_TYPE_PREF_BITS           2
+#   endif
+#endif
+
+
+/**
+ * The number of bits to represent ICE candidate's local preference. The
+ * local preference is used to specify preference among candidates with
+ * the same type, and ICE draft suggests 65535 as the default local 
+ * preference, which means we need 16 bits to represent the value. But 
+ * since we don't have the facility to specify local preference, we'll
+ * just disable this feature and let the preference sorted by the 
+ * type only.
+ *
+ * Default: 0
+ */
+#ifndef PJ_ICE_LOCAL_PREF_BITS
+#   define PJ_ICE_LOCAL_PREF_BITS                   0
+#endif
+
+
+/**
+ * Maximum number of ICE checks.
+ *
+ * Default: 32
+ */
+#ifndef PJ_ICE_MAX_CHECKS
+#   define PJ_ICE_MAX_CHECKS                        32
+#endif
+
+
+/**
+ * Default timer interval (in miliseconds) for starting ICE periodic checks.
+ *
+ * Default: 20
+ */
+#ifndef PJ_ICE_TA_VAL
+#   define PJ_ICE_TA_VAL                            20
+#endif
+
+
+/**
+ * According to ICE Section 8.2. Updating States, if an In-Progress pair in 
+ * the check list is for the same component as a nominated pair, the agent 
+ * SHOULD cease retransmissions for its check if its pair priority is lower
+ * than the lowest priority nominated pair for that component.
+ *
+ * If a higher priority check is In Progress, this rule would cause that
+ * check to be performed even when it most likely will fail.
+ *
+ * The macro here controls if ICE session should cancel all In Progress 
+ * checks for the same component regardless of its priority.
+ *
+ * Default: 1 (yes, cancel all)
+ */
+#ifndef PJ_ICE_CANCEL_ALL
+#   define PJ_ICE_CANCEL_ALL                        1
+#endif
+
+
+/**
+ * For a controlled agent, specify how long it wants to wait (in milliseconds)
+ * for the controlling agent to complete sending connectivity check with
+ * nominated flag set to true for all components after the controlled agent
+ * has found that all connectivity checks in its checklist have been completed
+ * and there is at least one successful (but not nominated) check for every
+ * component.
+ *
+ * When selecting the value, bear in mind that the connectivity check from
+ * controlling agent may be delayed because of delay in receiving SDP answer
+ * from the controlled agent.
+ *
+ * Application may set this value to -1 to disable this timer.
+ *
+ * Default: 10000 (milliseconds)
+ */
+#ifndef ICE_CONTROLLED_AGENT_WAIT_NOMINATION_TIMEOUT
+#   define ICE_CONTROLLED_AGENT_WAIT_NOMINATION_TIMEOUT 10000
+#endif
+
+
+/**
+ * For controlling agent if it uses regular nomination, specify the delay to
+ * perform nominated check (connectivity check with USE-CANDIDATE attribute)
+ * after all components have a valid pair.
+ *
+ * Default: 4*PJ_STUN_RTO_VALUE (milliseconds)
+ */
+#ifndef PJ_ICE_NOMINATED_CHECK_DELAY
+#   define PJ_ICE_NOMINATED_CHECK_DELAY             (4*PJ_STUN_RTO_VALUE)
+#endif
+
+
+/**
+ * Minimum interval value to be used for sending STUN keep-alive on the ICE
+ * session, in seconds. This minimum interval, plus a random value
+ * which maximum is PJ_ICE_SESS_KEEP_ALIVE_MAX_RAND, specify the actual interval
+ * of the STUN keep-alive.
+ *
+ * Default: 15 seconds
+ *
+ * @see PJ_ICE_SESS_KEEP_ALIVE_MAX_RAND
+ */
+#ifndef PJ_ICE_SESS_KEEP_ALIVE_MIN
+#   define PJ_ICE_SESS_KEEP_ALIVE_MIN               20
+#endif
+
+/* Warn about deprecated macro */
+#ifdef PJ_ICE_ST_KEEP_ALIVE_MIN
+#   error PJ_ICE_ST_KEEP_ALIVE_MIN is deprecated
+#endif
+
+/**
+ * To prevent STUN keep-alives to be sent simultaneously, application should
+ * add random interval to minimum interval (PJ_ICE_SESS_KEEP_ALIVE_MIN). This
+ * setting specifies the maximum random value to be added to the minimum
+ * interval, in seconds.
+ *
+ * Default: 5 seconds
+ *
+ * @see PJ_ICE_SESS_KEEP_ALIVE_MIN
+ */
+#ifndef PJ_ICE_SESS_KEEP_ALIVE_MAX_RAND
+#   define PJ_ICE_SESS_KEEP_ALIVE_MAX_RAND          5
+#endif
+
+/* Warn about deprecated macro */
+#ifdef PJ_ICE_ST_KEEP_ALIVE_MAX_RAND
+#   error PJ_ICE_ST_KEEP_ALIVE_MAX_RAND is deprecated
+#endif
+
+
+/**
+ * This constant specifies the length of random string generated for ICE
+ * ufrag.
+ *
+ * Default: 8 (characters)
+ */
+#ifndef PJ_ICE_UFRAG_LEN
+#   define PJ_ICE_UFRAG_LEN                         8
+#endif
+
+
+/**
+ * This constant specifies the length of random string generated for ICE
+ * password.
+ *
+ * Default: 24 (characters)
+ */
+#ifndef PJ_ICE_PWD_LEN
+#   define PJ_ICE_PWD_LEN                           24
+#endif
+
+
+/**
+ * This constant specifies whether ICE stream transport should allow TURN
+ * client session to automatically renew permission for all remote candidates.
+ *
+ * Default: PJ_FALSE
+ */
+#ifndef PJ_ICE_ST_USE_TURN_PERMANENT_PERM
+#   define PJ_ICE_ST_USE_TURN_PERMANENT_PERM        PJ_FALSE
+#endif
+
+
+/**
+ * For trickle ICE, this macro specifies the maximum time of waiting for
+ * end-of-candidates indication from remote once ICE connectivity checks
+ * is started, in seconds. When the timer expires, ICE will assume that
+ * end-of-candidates indication is received so any further remote candidate
+ * update will be ignored.
+ *
+ * Note that without remote end-of-candidates indication, ICE will not be
+ * able to conclude that the ICE negotiation has failed when all pair checks
+ * are completed but there is no valid pair (on the other hand, the ICE
+ * negotiation may be completed as successful before the end-of-candidates
+ * indication is received when valid pairs are found very quickly).
+ *
+ * Also note that the ICE connectivity checks should only be started after
+ * both agents have started trickling ICE candidates (e.g: both have sent
+ * their SDPs, either via normal SDP offer/answer or SIP INFO).
+ *
+ * Default: 40 seconds.
+ */
+#ifndef PJ_TRICKLE_ICE_END_OF_CAND_TIMEOUT
+#   define PJ_TRICKLE_ICE_END_OF_CAND_TIMEOUT       40
+#endif
+
+
+/** ICE session pool initial size. */
+#ifndef PJNATH_POOL_LEN_ICE_SESS
+#   define PJNATH_POOL_LEN_ICE_SESS                 512
+#endif
+
+/** ICE session pool increment size */
+#ifndef PJNATH_POOL_INC_ICE_SESS
+#   define PJNATH_POOL_INC_ICE_SESS                 512
+#endif
+
+/** ICE stream transport pool initial size. */
+#ifndef PJNATH_POOL_LEN_ICE_STRANS
+#   define PJNATH_POOL_LEN_ICE_STRANS               1000
+#endif
+
+/** ICE stream transport pool increment size */
+#ifndef PJNATH_POOL_INC_ICE_STRANS
+#   define PJNATH_POOL_INC_ICE_STRANS               512
+#endif
+
+/** NAT detect pool initial size */
+#ifndef PJNATH_POOL_LEN_NATCK
+#   define PJNATH_POOL_LEN_NATCK                    512
+#endif
+
+/** NAT detect pool increment size */
+#ifndef PJNATH_POOL_INC_NATCK
+#   define PJNATH_POOL_INC_NATCK                    512
+#endif
+
+/** STUN session pool initial size */
+#ifndef PJNATH_POOL_LEN_STUN_SESS
+#   define PJNATH_POOL_LEN_STUN_SESS                1000
+#endif
+
+/** STUN session pool increment size */
+#ifndef PJNATH_POOL_INC_STUN_SESS
+#   define PJNATH_POOL_INC_STUN_SESS                1000
+#endif
+
+/** STUN session transmit data pool initial size */
+#ifndef PJNATH_POOL_LEN_STUN_TDATA
+#   define PJNATH_POOL_LEN_STUN_TDATA               1000
+#endif
+
+/** STUN session transmit data pool increment size */
+#ifndef PJNATH_POOL_INC_STUN_TDATA
+#   define PJNATH_POOL_INC_STUN_TDATA               1000
+#endif
+
+/** TURN session initial pool size */
+#ifndef PJNATH_POOL_LEN_TURN_SESS
+#   define PJNATH_POOL_LEN_TURN_SESS                1000
+#endif
+
+/** TURN session pool increment size */
+#ifndef PJNATH_POOL_INC_TURN_SESS
+#   define PJNATH_POOL_INC_TURN_SESS                1000
+#endif
+
+/** TURN socket initial pool size */
+#ifndef PJNATH_POOL_LEN_TURN_SOCK
+#   define PJNATH_POOL_LEN_TURN_SOCK                1000
+#endif
+
+/** TURN socket pool increment size */
+#ifndef PJNATH_POOL_INC_TURN_SOCK
+#   define PJNATH_POOL_INC_TURN_SOCK                1000
+#endif
+
+/** Default STUN software name */
+#ifndef PJNATH_STUN_SOFTWARE_NAME
+/** Create STUN software name */
+#   define PJNATH_MAKE_SW_NAME(a,b,c,d)     "pjnath-" #a "." #b "." #c d
+/** Create STUN software name */
+#   define PJNATH_MAKE_SW_NAME2(a,b,c,d)    PJNATH_MAKE_SW_NAME(a,b,c,d)
+/** Default STUN software name */
+#   define PJNATH_STUN_SOFTWARE_NAME        PJNATH_MAKE_SW_NAME2( \
+                                                    PJ_VERSION_NUM_MAJOR, \
+                                                    PJ_VERSION_NUM_MINOR, \
+                                                    PJ_VERSION_NUM_REV, \
+                                                    PJ_VERSION_NUM_EXTRA)
+#endif
+
+
+/* **************************************************************************
+ * UPnP
+ */
+
+/** Default duration for searching UPnP Internet Gateway Devices (in seconds).
+ *  Default: 5 seconds
+ */
+#ifndef PJ_UPNP_DEFAULT_SEARCH_TIME 
+#   define PJ_UPNP_DEFAULT_SEARCH_TIME  5
+#endif
+
+
+/**
+ * @}
+ */
+
+#endif  /* __PJNATH_CONFIG_H__ */
+