@voipsdk/react-native-voipcloud 1.0.0 → 1.0.2

package/ios/VoipCloud.xcframework/ios-arm64_x86_64-simulator/Headers/pjmedia/conference.h

@@ -0,0 +1,599 @@
+/* 
+ * Copyright (C) 2008-2011 Teluu Inc. (http://www.teluu.com)
+ * Copyright (C) 2003-2008 Benny Prijono <benny@prijono.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA 
+ */
+#ifndef __PJMEDIA_CONF_H__
+#define __PJMEDIA_CONF_H__
+
+
+/**
+ * @file conference.h
+ * @brief Conference bridge.
+ */
+#include <pjmedia/port.h>
+
+/**
+ * @defgroup PJMEDIA_CONF Conference Bridge
+ * @ingroup PJMEDIA_PORT
+ * @brief Audio conference bridge implementation
+ * @{
+ *
+ * This describes the conference bridge implementation in PJMEDIA. The
+ * conference bridge provides powerful and very efficient mechanism to
+ * route the audio flow and mix the audio signal when required.
+ *
+ * Some more information about the media flow when conference bridge is
+ * used is described in http://www.pjsip.org/trac/wiki/media-flow .
+ */
+
+PJ_BEGIN_DECL
+
+/* Since 1.3 pjmedia_conf_add_passive_port() has been deprecated
+ * and replaced by splitcomb.
+ * See also https://github.com/pjsip/pjproject/issues/2234.
+ */
+#ifndef DEPRECATED_FOR_TICKET_2234
+#  define DEPRECATED_FOR_TICKET_2234    1
+#endif
+
+/**
+ * The conference bridge signature in pjmedia_port_info.
+ */
+#define PJMEDIA_CONF_BRIDGE_SIGNATURE   PJMEDIA_SIG_PORT_CONF
+
+/**
+ * The audio switchboard signature in pjmedia_port_info.
+ */
+#define PJMEDIA_CONF_SWITCH_SIGNATURE   PJMEDIA_SIG_PORT_CONF_SWITCH
+
+
+/**
+ * Opaque type for conference bridge.
+ */
+typedef struct pjmedia_conf pjmedia_conf;
+
+/**
+ * Conference port info.
+ */
+typedef struct pjmedia_conf_port_info
+{
+    unsigned            slot;               /**< Slot number.               */
+    pj_str_t            name;               /**< Port name.                 */
+    pjmedia_format      format;             /**< Format.                    */
+    pjmedia_port_op     tx_setting;         /**< Transmit settings.         */
+    pjmedia_port_op     rx_setting;         /**< Receive settings.          */
+    unsigned            listener_cnt;       /**< Number of listeners.       */
+    unsigned           *listener_slots;     /**< Array of listeners.        */
+    unsigned           *listener_adj_level; /**< Array of listeners' level
+                                                 adjustment                 */
+    unsigned            transmitter_cnt;    /**< Number of transmitter.     */
+    unsigned            clock_rate;         /**< Clock rate of the port.    */
+    unsigned            channel_count;      /**< Number of channels.        */
+    unsigned            samples_per_frame;  /**< Samples per frame          */
+    unsigned            bits_per_sample;    /**< Bits per sample.           */
+    int                 tx_adj_level;       /**< Tx level adjustment.       */
+    int                 rx_adj_level;       /**< Rx level adjustment.       */
+} pjmedia_conf_port_info;
+
+
+/**
+ * Conference port options. The values here can be combined in bitmask to
+ * be specified when the conference bridge is created.
+ */
+enum pjmedia_conf_option
+{
+    PJMEDIA_CONF_NO_MIC  = 1,   /**< Disable audio streams from the
+                                     microphone device.                     */
+    PJMEDIA_CONF_NO_DEVICE = 2, /**< Do not create sound device.            */
+    PJMEDIA_CONF_SMALL_FILTER=4,/**< Use small filter table when resampling */
+    PJMEDIA_CONF_USE_LINEAR=8   /**< Use linear resampling instead of filter
+                                     based.                                 */
+};
+
+
+/**
+ * Create conference bridge with the specified parameters. The sampling rate,
+ * samples per frame, and bits per sample will be used for the internal
+ * operation of the bridge (e.g. when mixing audio frames). However, ports 
+ * with different configuration may be connected to the bridge. In this case,
+ * the bridge is able to perform sampling rate conversion, and buffering in 
+ * case the samples per frame is different.
+ *
+ * For this version of PJMEDIA, only 16bits per sample is supported.
+ *
+ * For this version of PJMEDIA, the channel count of the ports MUST match
+ * the channel count of the bridge.
+ *
+ * Under normal operation (i.e. when PJMEDIA_CONF_NO_DEVICE option is NOT
+ * specified), the bridge internally create an instance of sound device
+ * and connect the sound device to port zero of the bridge. 
+ *
+ * If PJMEDIA_CONF_NO_DEVICE options is specified, no sound device will
+ * be created in the conference bridge. Application MUST acquire the port
+ * interface of the bridge by calling #pjmedia_conf_get_master_port(), and
+ * connect this port interface to a sound device port by calling
+ * #pjmedia_snd_port_connect(), or to a master port (pjmedia_master_port)
+ * if application doesn't want to instantiate any sound devices.
+ *
+ * The sound device or master port are crucial for the bridge's operation, 
+ * because it provides the bridge with necessary clock to process the audio
+ * frames periodically. Internally, the bridge runs when get_frame() to 
+ * port zero is called.
+ *
+ * @param pool              Pool to use to allocate the bridge and 
+ *                          additional buffers for the sound device.
+ * @param max_slots         Maximum number of slots/ports to be created in
+ *                          the bridge. Note that the bridge internally uses
+ *                          one port for the sound device, so the actual 
+ *                          maximum number of ports will be less one than
+ *                          this value.
+ * @param sampling_rate     Set the sampling rate of the bridge. This value
+ *                          is also used to set the sampling rate of the
+ *                          sound device.
+ * @param channel_count     Number of channels in the PCM stream. Normally
+ *                          the value will be 1 for mono, but application may
+ *                          specify a value of 2 for stereo. Note that all
+ *                          ports that will be connected to the bridge MUST 
+ *                          have the same number of channels as the bridge.
+ * @param samples_per_frame Set the number of samples per frame. This value
+ *                          is also used to set the sound device.
+ * @param bits_per_sample   Set the number of bits per sample. This value
+ *                          is also used to set the sound device. Currently
+ *                          only 16bit per sample is supported.
+ * @param options           Bitmask options to be set for the bridge. The
+ *                          options are constructed from #pjmedia_conf_option
+ *                          enumeration.
+ * @param p_conf            Pointer to receive the conference bridge instance.
+ *
+ * @return                  PJ_SUCCESS if conference bridge can be created.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_create( pj_pool_t *pool,
+                                          unsigned max_slots,
+                                          unsigned sampling_rate,
+                                          unsigned channel_count,
+                                          unsigned samples_per_frame,
+                                          unsigned bits_per_sample,
+                                          unsigned options,
+                                          pjmedia_conf **p_conf );
+
+
+/**
+ * Destroy conference bridge.
+ *
+ * @param conf              The conference bridge.
+ *
+ * @return                  PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_destroy( pjmedia_conf *conf );
+
+
+/**
+ * Get the master port interface of the conference bridge. The master port
+ * corresponds to the port zero of the bridge. This is only usefull when 
+ * application wants to manage the sound device by itself, instead of 
+ * allowing the bridge to automatically create a sound device implicitly.
+ *
+ * This function will only return a port interface if PJMEDIA_CONF_NO_DEVICE
+ * option was specified when the bridge was created.
+ *
+ * Application can connect the port returned by this function to a 
+ * sound device by calling #pjmedia_snd_port_connect().
+ *
+ * @param conf              The conference bridge.
+ *
+ * @return                  The port interface of port zero of the bridge,
+ *                          only when PJMEDIA_CONF_NO_DEVICE options was
+ *                          specified when the bridge was created.
+ */
+PJ_DECL(pjmedia_port*) pjmedia_conf_get_master_port(pjmedia_conf *conf);
+
+
+/**
+ * Set master port name.
+ *
+ * @param conf              The conference bridge.
+ * @param name              Name to be assigned.
+ *
+ * @return                  PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_set_port0_name(pjmedia_conf *conf,
+                                                 const pj_str_t *name);
+
+
+/**
+ * Add media port to the conference bridge.
+ *
+ * By default, the new conference port will have both TX and RX enabled, 
+ * but it is not connected to any other ports. Application SHOULD call 
+ * #pjmedia_conf_connect_port() to  enable audio transmission and receipt 
+ * to/from this port.
+ *
+ * Once the media port is connected to other port(s) in the bridge,
+ * the bridge will continuosly call get_frame() and put_frame() to the
+ * port, allowing media to flow to/from the port.
+ *
+ * @param conf          The conference bridge.
+ * @param pool          Pool to allocate buffers for this port.
+ * @param strm_port     Stream port interface.
+ * @param name          Optional name for the port. If this value is NULL,
+ *                      the name will be taken from the name in the port 
+ *                      info.
+ * @param p_slot        Pointer to receive the slot index of the port in
+ *                      the conference bridge.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_add_port( pjmedia_conf *conf,
+                                            pj_pool_t *pool,
+                                            pjmedia_port *strm_port,
+                                            const pj_str_t *name,
+                                            unsigned *p_slot );
+
+
+#if !DEPRECATED_FOR_TICKET_2234
+/**
+ * <i><b>Warning:</b> This API has been deprecated since 1.3 and will be
+ * removed in the future release, use @ref PJMEDIA_SPLITCOMB instead.</i>
+ *
+ * Create and add a passive media port to the conference bridge. Unlike
+ * "normal" media port that is added with #pjmedia_conf_add_port(), media
+ * port created with this function will not have its get_frame() and
+ * put_frame() called by the bridge; instead, application MUST continuosly
+ * call these functions to the port, to allow media to flow from/to the
+ * port.
+ *
+ * Upon return of this function, application will be given two objects:
+ * the slot number of the port in the bridge, and pointer to the media
+ * port where application MUST start calling get_frame() and put_frame()
+ * to the port.
+ *
+ * @param conf              The conference bridge.
+ * @param pool              Pool to allocate buffers etc for this port.
+ * @param name              Name to be assigned to the port.
+ * @param clock_rate        Clock rate/sampling rate.
+ * @param channel_count     Number of channels.
+ * @param samples_per_frame Number of samples per frame.
+ * @param bits_per_sample   Number of bits per sample.
+ * @param options           Options (should be zero at the moment).
+ * @param p_slot            Pointer to receive the slot index of the port in
+ *                          the conference bridge.
+ * @param p_port            Pointer to receive the port instance.
+ *
+ * @return                  PJ_SUCCESS on success, or the appropriate error 
+ *                          code.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_add_passive_port( pjmedia_conf *conf,
+                                                    pj_pool_t *pool,
+                                                    const pj_str_t *name,
+                                                    unsigned clock_rate,
+                                                    unsigned channel_count,
+                                                    unsigned samples_per_frame,
+                                                    unsigned bits_per_sample,
+                                                    unsigned options,
+                                                    unsigned *p_slot,
+                                                    pjmedia_port **p_port );
+
+#endif
+
+/**
+ * Change TX and RX settings for the port.
+ *
+ * @param conf          The conference bridge.
+ * @param slot          Port number/slot in the conference bridge.
+ * @param tx            Settings for the transmission TO this port.
+ * @param rx            Settings for the receipt FROM this port.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_configure_port( pjmedia_conf *conf,
+                                                  unsigned slot,
+                                                  pjmedia_port_op tx,
+                                                  pjmedia_port_op rx);
+
+
+/**
+ * Enable unidirectional audio from the specified source slot to the specified
+ * sink slot.
+ * Application may adjust the level to make signal transmitted from the source
+ * slot to the sink slot either louder or more quiet. The level adjustment is
+ * calculated with this formula:
+ * <b><tt>output = input * (adj_level+128) / 128</tt></b>. Using this, zero
+ * indicates no adjustment, the value -128 will mute the signal, and the value
+ * of +128 will make the signal 100% louder, +256 will make it 200% louder,
+ * etc.
+ *
+ * The level adjustment will apply to a specific connection only (i.e. only
+ * for the signal from the source to the sink), as compared to
+ * pjmedia_conf_adjust_tx_level()/pjmedia_conf_adjust_rx_level() which
+ * applies to all signals from/to that port. The signal adjustment
+ * will be cumulative, in this following order:
+ * signal from the source will be adjusted with the level specified
+ * in pjmedia_conf_adjust_rx_level(), then with the level specified
+ * via this API, and finally with the level specified to the sink's
+ * pjmedia_conf_adjust_tx_level(). 
+ *
+ * @param conf          The conference bridge.
+ * @param src_slot      Source slot.
+ * @param sink_slot     Sink slot.
+ * @param adj_level     Adjustment level, which must be greater than or equal
+ *                      to -128. A value of zero means there is no level
+ *                      adjustment to be made, the value -128 will mute the
+ *                      signal, and the value of +128 will make the signal
+ *                      100% louder, +256 will make it 200% louder, etc.
+ *                      See the function description for the formula.
+ *
+ * @return              PJ_SUCCES on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_connect_port( pjmedia_conf *conf,
+                                                unsigned src_slot,
+                                                unsigned sink_slot,
+                                                int adj_level );
+
+
+/**
+ * Disconnect unidirectional audio from the specified source to the specified
+ * sink slot.
+ *
+ * @param conf          The conference bridge.
+ * @param src_slot      Source slot.
+ * @param sink_slot     Sink slot.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_disconnect_port( pjmedia_conf *conf,
+                                                   unsigned src_slot,
+                                                   unsigned sink_slot );
+
+
+/**
+ * Disconnect unidirectional audio from all sources to the specified sink slot.
+ *
+ * @param conf          The conference bridge.
+ * @param sink_slot     Sink slot.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t)
+pjmedia_conf_disconnect_port_from_sources( pjmedia_conf *conf,
+                                           unsigned sink_slot);
+
+
+/**
+ * Disconnect unidirectional audio from the specified source to all sink slots.
+ *
+ * @param conf          The conference bridge.
+ * @param src_slot      Source slot.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t)
+pjmedia_conf_disconnect_port_from_sinks( pjmedia_conf *conf,
+                                         unsigned src_slot);
+
+
+/**
+ * Get number of ports currently registered to the conference bridge.
+ *
+ * @param conf          The conference bridge.
+ *
+ * @return              Number of ports currently registered to the conference
+ *                      bridge.
+ */
+PJ_DECL(unsigned) pjmedia_conf_get_port_count(pjmedia_conf *conf);
+
+
+/**
+ * Get total number of ports connections currently set up in the bridge.
+ * 
+ * @param conf          The conference bridge.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(unsigned) pjmedia_conf_get_connect_count(pjmedia_conf *conf);
+
+
+/**
+ * Remove the specified port from the conference bridge.
+ *
+ * @param conf          The conference bridge.
+ * @param slot          The port index to be removed.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_remove_port( pjmedia_conf *conf,
+                                               unsigned slot );
+
+
+
+/**
+ * Enumerate occupied ports in the bridge.
+ *
+ * @param conf          The conference bridge.
+ * @param ports         Array of port numbers to be filled in.
+ * @param count         On input, specifies the maximum number of ports
+ *                      in the array. On return, it will be filled with
+ *                      the actual number of ports.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_enum_ports( pjmedia_conf *conf,
+                                              unsigned ports[],
+                                              unsigned *count );
+
+
+/**
+ * Get port info.
+ *
+ * @param conf          The conference bridge.
+ * @param slot          Port index.
+ * @param info          Pointer to receive the info.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_get_port_info( pjmedia_conf *conf,
+                                                 unsigned slot,
+                                                 pjmedia_conf_port_info *info);
+
+
+/**
+ * Get occupied ports info.
+ *
+ * @param conf          The conference bridge.
+ * @param size          On input, contains maximum number of infos
+ *                      to be retrieved. On output, contains the actual
+ *                      number of infos that have been copied.
+ * @param info          Array of info.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_get_ports_info(pjmedia_conf *conf,
+                                                 unsigned *size,
+                                                 pjmedia_conf_port_info info[]
+                                                 );
+
+
+/**
+ * Get last signal level transmitted to or received from the specified port.
+ * This will retrieve the "real-time" signal level of the audio as they are
+ * transmitted or received by the specified port. Application may call this
+ * function periodically to display the signal level to a VU meter.
+ *
+ * The signal level is an integer value in zero to 255, with zero indicates
+ * no signal, and 255 indicates the loudest signal level.
+ *
+ * @param conf          The conference bridge.
+ * @param slot          Slot number.
+ * @param tx_level      Optional argument to receive the level of signal
+ *                      transmitted to the specified port (i.e. the direction
+ *                      is from the bridge to the port).
+ * @param rx_level      Optional argument to receive the level of signal
+ *                      received from the port (i.e. the direction is from the
+ *                      port to the bridge).
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_get_signal_level(pjmedia_conf *conf,
+                                                   unsigned slot,
+                                                   unsigned *tx_level,
+                                                   unsigned *rx_level);
+
+
+/**
+ * Adjust the level of signal received from the specified port.
+ * Application may adjust the level to make signal received from the port
+ * either louder or more quiet. The level adjustment is calculated with this
+ * formula: <b><tt>output = input * (adj_level+128) / 128</tt></b>. Using 
+ * this, zero indicates no adjustment, the value -128 will mute the signal, 
+ * and the value of +128 will make the signal 100% louder, +256 will make it
+ * 200% louder, etc.
+ *
+ * The level adjustment value will stay with the port until the port is
+ * removed from the bridge or new adjustment value is set. The current
+ * level adjustment value is reported in the media port info when
+ * the #pjmedia_conf_get_port_info() function is called.
+ *
+ * @param conf          The conference bridge.
+ * @param slot          Slot number of the port.
+ * @param adj_level     Adjustment level, which must be greater than or equal
+ *                      to -128. A value of zero means there is no level
+ *                      adjustment to be made, the value -128 will mute the 
+ *                      signal, and the value of +128 will make the signal 
+ *                      100% louder, +256 will make it 200% louder, etc. 
+ *                      See the function description for the formula.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_adjust_rx_level( pjmedia_conf *conf,
+                                                   unsigned slot,
+                                                   int adj_level );
+
+
+/**
+ * Adjust the level of signal to be transmitted to the specified port.
+ * Application may adjust the level to make signal transmitted to the port
+ * either louder or more quiet. The level adjustment is calculated with this
+ * formula: <b><tt>output = input * (adj_level+128) / 128</tt></b>. Using 
+ * this, zero indicates no adjustment, the value -128 will mute the signal, 
+ * and the value of +128 will make the signal 100% louder, +256 will make it
+ * 200% louder, etc.
+ *
+ * The level adjustment value will stay with the port until the port is
+ * removed from the bridge or new adjustment value is set. The current
+ * level adjustment value is reported in the media port info when
+ * the #pjmedia_conf_get_port_info() function is called.
+ *
+ * @param conf          The conference bridge.
+ * @param slot          Slot number of the port.
+ * @param adj_level     Adjustment level, which must be greater than or equal
+ *                      to -128. A value of zero means there is no level
+ *                      adjustment to be made, the value -128 will mute the 
+ *                      signal, and the value of +128 will make the signal 
+ *                      100% louder, +256 will make it 200% louder, etc. 
+ *                      See the function description for the formula.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_adjust_tx_level( pjmedia_conf *conf,
+                                                   unsigned slot,
+                                                   int adj_level );
+
+
+/**
+ * Adjust the level of signal to be transmitted from the source slot to the
+ * sink slot.
+ * Application may adjust the level to make signal transmitted from the source
+ * slot to the sink slot either louder or more quiet. The level adjustment is
+ * calculated with this formula:
+ * <b><tt>output = input * (adj_level+128) / 128</tt></b>. Using this, zero
+ * indicates no adjustment, the value -128 will mute the signal, and the value
+ * of +128 will make the signal 100% louder, +256 will make it 200% louder,
+ * etc.
+ *
+ * The level adjustment value will stay with the connection until the
+ * connection is removed or new adjustment value is set. The current level
+ * adjustment value is reported in the media port info when the
+ * #pjmedia_conf_get_port_info() function is called.
+ *
+ * @param conf          The conference bridge.
+ * @param src_slot      Source slot.
+ * @param sink_slot     Sink slot.
+ * @param adj_level     Adjustment level, which must be greater than or equal
+ *                      to -128. A value of zero means there is no level
+ *                      adjustment to be made, the value -128 will mute the 
+ *                      signal, and the value of +128 will make the signal 
+ *                      100% louder, +256 will make it 200% louder, etc. 
+ *                      See the function description for the formula.
+ *
+ * @return              PJ_SUCCESS on success.
+ */
+PJ_DECL(pj_status_t) pjmedia_conf_adjust_conn_level( pjmedia_conf *conf,
+                                                     unsigned src_slot,
+                                                     unsigned sink_slot,
+                                                     int adj_level );
+
+
+
+PJ_END_DECL
+
+
+/**
+ * @}
+ */
+
+
+#endif  /* __PJMEDIA_CONF_H__ */
+