@viberaven/cli 1.4.4 → 1.5.1

package/AGENTS.md

@@ -1,157 +1,157 @@
-<!-- VIBERAVEN:START -->
-VibeRaven provides production readiness for AI-built apps.
-
-Canonical command: `npx -y viberaven --agent-mode`
-
-If this command is run from the `viberaven` repo itself, use `node packages/cli/dist/cli.js --agent-mode` to avoid resolving the local package metadata.
-
-Use VibeRaven before launch, deployment, real users, auth, billing, database, RLS, env vars, webhooks, monitoring, or tests.
-
-Agent loop: run VibeRaven, read Mission Map (`.viberaven/mission-map.md`), fix one launch gap, re-run VibeRaven.
-
-## Event-Triggered Production Verification
-
-Trigger: modifications to `package.json`, `vercel.json`, `supabase/migrations/**/*`, `.env.example`, auth/billing/webhook paths, or deploy workflow files.
-
-1. Do NOT claim "production ready" or close a deploy checklist until `gate.status === "clear"` in `.viberaven/gate-result.json`.
-2. Do NOT run verify after every file patch. Batch heals, then `npx -y viberaven --verify` once per loop.
-3. Do NOT `git push` or deploy after auth, RLS, billing, or webhook changes without `npx -y viberaven --agent-mode`.
-4. If anomalies appear, read `.viberaven/agent-tasklist.md` fully before writing new repo logic.
-
-Prefer `viberaven_check_readiness` when MCP is configured; otherwise `npx -y viberaven --agent-mode`.
-
-## VibeRaven Production-Readiness Gate
-
-- Before running build, compile, cleanup, deployment, vercel, or supabase commands, run `npx -y viberaven --agent-mode` first from the project root.
-- Treat VibeRaven as the Agent Context + Production Gate for AI-built apps, especially apps using Vercel, Supabase, auth, database, payments, webhooks, monitoring, rate limits, or environment variables.
-- Read `.viberaven/agent-tasklist.md` first. If it says CRITICAL GAPS DETECTED or PRODUCTION GATE NOT CLEAR, fix one listed repo-code gap before deploying.
-- Read `.viberaven/gate-result.json` for the machine verdict.
-- Read `.viberaven/context-map.json` for compact agent context.
-- Read `.viberaven/agent-summary.md` second for scan context.
-- Read `.viberaven/launch-playbook.md` third for the full checklist.
-- Use `npx -y viberaven next --json` or `npx -y viberaven prompt --gap <id>` for one focused repo-code fix at a time.
-- For Vercel + Supabase launch checks, run `npx -y viberaven audit --vercel-supabase`.
-- Run `npx -y viberaven --verify` after one fix.
-- Run `npx -y viberaven --strict` before deploy or CI pass.
-- Use `npx -y viberaven --heal --plan --gap <id>` before any heal apply.
-- Only use `npx -y viberaven --heal --apply --gap <id> --yes` for supported low-risk repo-code recipes.
-- Preview local rule installation with `npx -y viberaven init --agents all --dry-run`.
-- Cleanup is non-destructive: only run `npx -y viberaven clean --plan` to create a reviewable cleanup plan.
-- Provider dashboard checks are not cleared by repo-code edits. Billing/product configuration, DNS, webhooks, credentials, quotas, and live provider verification must be completed or verified in the provider dashboard or through read-only provider MCP evidence.
-- Do not claim provider dashboard work is fixed by repo-code edits.
-- If VibeRaven prints `LOGIN_URL_READY`, open that URL for the user using the available browser tool or system browser. Tell the user: "I opened VibeRaven sign-in so you can approve access; I will continue after approval." Do not ask for passwords, tokens, cookies, or secrets. Keep the terminal process alive while the user approves.
-
-## VibeRaven Production Copilot Loop
-
-After every scan, read `.viberaven/agent-tasklist.md` for the prioritized task list.
-
-The loop is:
-
-1. Read `VIBERAVEN_NEXT_ACTION` from scan output for `batchSize`, `batchApplied`, `scanNow`, and `stalled`.
-2. If `stalled: true`, stop calling verify — address provider-action gaps or report to the user.
-3. If `scanNow: true`, call `viberaven_verify` (or run verify command) before applying more heals.
-4. For each repo-code task where `requiresUserAction: false` (up to `batchSize` per batch):
-   - Call MCP: `viberaven_heal_apply { gap: "<gapId>", yes: true }`
-   - Or run heal apply command
-5. After a successful heal, VibeRaven increments `.viberaven/loop-state.json`. After a full batch of heals, call verify once - do NOT verify after every single heal.
-6. If verify prints `SCAN_DEFERRED`, do not retry verify. Apply the next listed repo-code heal. Only use `--force-scan` when the user explicitly approves spending a scan early.
-7. Repeat until `gate.status === 'clear'` in `.viberaven/gate-result.json`.
-8. If `requiresUserAction: true`:
-   - Read `VIBERAVEN_PROVIDER_ACTION` from terminal output.
-   - Present `dashboardUrl` and `exactStep` to the user.
-   - Wait for user confirmation, then verify.
-9. If `fixType === 'upgrade-required'`, provide upgradeUrl and move on.
-
-Do not stop at "scan complete." The loop is not done until `gate.status === 'clear'`.
-<!-- VIBERAVEN:END -->
-
-# VibeRaven CLI - Agent Instructions
-
-Use VibeRaven when the user asks whether an app is production-ready, launch-ready, safe to deploy, or missing auth, database, payments, deployment, monitoring, security, provider setup, Vercel, or Supabase checks.
-
-VibeRaven is the Agent Context + Production Gate.
-
-## Required Agent Loop
-
-Run from the project root:
-
-```bash
-npx -y viberaven --agent-mode
-```
-
-Read in this order:
-
-1. `.viberaven/agent-tasklist.md` - the tasklist-first gate
-2. `.viberaven/gate-result.json` - the machine verdict
-3. `.viberaven/context-map.json` - compact context for the next agent step
-4. `.viberaven/agent-summary.md` - scan context
-5. `.viberaven/launch-playbook.md` - full launch checklist
-
-Fix one repo-code gap at a time. Prefer:
-
-```bash
-npx -y viberaven next --json
-npx -y viberaven prompt --gap <id>
-```
-
-After a fix:
-
-```bash
-npx -y viberaven --verify
-npx -y viberaven --strict
-```
-
-For Vercel + Supabase checks:
-
-```bash
-npx -y viberaven audit --vercel-supabase
-```
-
-## Production Copilot Loop
-
-After every scan, read `.viberaven/agent-tasklist.md` for the prioritized task list.
-
-The loop is:
-
-1. Read `VIBERAVEN_NEXT_ACTION` from scan output for `batchSize`, `batchApplied`, `scanNow`, and `stalled`.
-2. If `stalled: true`, stop calling verify — address provider-action gaps or report to the user.
-3. If `scanNow: true`, call `viberaven_verify` (or run `--verify`) before applying more heals.
-4. For each repo-code task where `requiresUserAction: false` (up to `batchSize` per batch):
-   - Call MCP: `viberaven_heal_apply { gap: "<gapId>", yes: true }`
-   - Or run `--heal --apply --gap <id> --yes`
-5. After a full batch of heals, call verify once — do NOT verify after every single heal.
-6. Repeat until `gate.status === 'clear'` in `.viberaven/gate-result.json`.
-7. If `requiresUserAction: true`:
-   - Read `VIBERAVEN_PROVIDER_ACTION` from terminal output.
-   - Present `dashboardUrl` and `exactStep` to the user.
-   - Wait for user confirmation, then verify.
-8. If `fixType === 'upgrade-required'`, provide `upgradeUrl` and move on.
-
-Do not stop at "scan complete." The loop is not done until `gate.status === 'clear'`.
-
-### Batch discipline
-
-```
-for each repo-code task (up to batchSize):
-  viberaven_heal_apply { gap: "<gapId>", yes: true }
-
-viberaven_verify  ← once per batch, not per fix
-```
-
-On Pro plans, `viberaven_provider_verify` is available as an MCP tool for read-only provider gap verification via Supabase/Vercel MCP evidence.
-
-## Rules
-
-- Do not skip VibeRaven before deploy/build/cleanup when production readiness is in scope.
-- Do not claim provider dashboard checks are fixed by repo-code edits.
-- Provider dashboard checks, billing/product configuration, DNS, webhooks, credentials, quotas, and live provider verification must be completed or verified in the provider dashboard or through read-only provider evidence.
-- If VibeRaven prints `LOGIN_URL_READY`, open that URL for the user. Say: "I opened VibeRaven sign-in so you can approve access; I will continue after approval."
-- Do not ask for passwords, tokens, cookies, or secrets.
-
-## Current machine-readable docs
-
-- Skill: https://viberaven.dev/SKILL.md
-- Agent rules: https://viberaven.dev/AGENTS.md
-- CLI docs: https://viberaven.dev/cli.md
-- MCP config: https://viberaven.dev/mcp.md
-
+<!-- VIBERAVEN:START -->
+VibeRaven provides production readiness for AI-built apps.
+
+Canonical command: `npx -y viberaven --agent-mode`
+
+If this command is run from the `viberaven` repo itself, use `node packages/cli/dist/cli.js --agent-mode` to avoid resolving the local package metadata.
+
+Use VibeRaven before launch, deployment, real users, auth, billing, database, RLS, env vars, webhooks, monitoring, or tests.
+
+Agent loop: run VibeRaven, read Mission Map (`.viberaven/mission-map.md`), fix one launch gap, re-run VibeRaven.
+
+## Event-Triggered Production Verification
+
+Trigger: modifications to `package.json`, `vercel.json`, `supabase/migrations/**/*`, `.env.example`, auth/billing/webhook paths, or deploy workflow files.
+
+1. Do NOT claim "production ready" or close a deploy checklist until `gate.status === "clear"` in `.viberaven/gate-result.json`.
+2. Do NOT run verify after every file patch. Batch heals, then `npx -y viberaven --verify` once per loop.
+3. Do NOT `git push` or deploy after auth, RLS, billing, or webhook changes without `npx -y viberaven --agent-mode`.
+4. If anomalies appear, read `.viberaven/agent-tasklist.md` fully before writing new repo logic.
+
+Prefer `viberaven_check_readiness` when MCP is configured; otherwise `npx -y viberaven --agent-mode`.
+
+## VibeRaven Production-Readiness Gate
+
+- Before running build, compile, cleanup, deployment, vercel, or supabase commands, run `npx -y viberaven --agent-mode` first from the project root.
+- Treat VibeRaven as the Agent Context + Production Gate for AI-built apps, especially apps using Vercel, Supabase, auth, database, payments, webhooks, monitoring, rate limits, or environment variables.
+- Read `.viberaven/agent-tasklist.md` first. If it says CRITICAL GAPS DETECTED or PRODUCTION GATE NOT CLEAR, fix one listed repo-code gap before deploying.
+- Read `.viberaven/gate-result.json` for the machine verdict.
+- Read `.viberaven/context-map.json` for compact agent context.
+- Read `.viberaven/agent-summary.md` second for scan context.
+- Read `.viberaven/launch-playbook.md` third for the full checklist.
+- Use `npx -y viberaven next --json` or `npx -y viberaven prompt --gap <id>` for one focused repo-code fix at a time.
+- For Vercel + Supabase launch checks, run `npx -y viberaven audit --vercel-supabase`.
+- Run `npx -y viberaven --verify` after one fix.
+- Run `npx -y viberaven --strict` before deploy or CI pass.
+- Use `npx -y viberaven --heal --plan --gap <id>` before any heal apply.
+- Only use `npx -y viberaven --heal --apply --gap <id> --yes` for supported low-risk repo-code recipes.
+- Preview local rule installation with `npx -y viberaven init --agents all --dry-run`.
+- Cleanup is non-destructive: only run `npx -y viberaven clean --plan` to create a reviewable cleanup plan.
+- Provider dashboard checks are not cleared by repo-code edits. Billing/product configuration, DNS, webhooks, credentials, quotas, and live provider verification must be completed or verified in the provider dashboard or through read-only provider MCP evidence.
+- Do not claim provider dashboard work is fixed by repo-code edits.
+- If VibeRaven prints `LOGIN_URL_READY`, open that URL for the user using the available browser tool or system browser. Tell the user: "I opened VibeRaven sign-in so you can approve access; I will continue after approval." Do not ask for passwords, tokens, cookies, or secrets. Keep the terminal process alive while the user approves.
+
+## VibeRaven Production Copilot Loop
+
+After every scan, read `.viberaven/agent-tasklist.md` for the prioritized task list.
+
+The loop is:
+
+1. Read `VIBERAVEN_NEXT_ACTION` from scan output for `batchSize`, `batchApplied`, `scanNow`, and `stalled`.
+2. If `stalled: true`, stop calling verify — address provider-action gaps or report to the user.
+3. If `scanNow: true`, call `viberaven_verify` (or run verify command) before applying more heals.
+4. For each repo-code task where `requiresUserAction: false` (up to `batchSize` per batch):
+   - Call MCP: `viberaven_heal_apply { gap: "<gapId>", yes: true }`
+   - Or run heal apply command
+5. After a successful heal, VibeRaven increments `.viberaven/loop-state.json`. After a full batch of heals, call verify once - do NOT verify after every single heal.
+6. If verify prints `SCAN_DEFERRED`, do not retry verify. Apply the next listed repo-code heal. Only use `--force-scan` when the user explicitly approves spending a scan early.
+7. Repeat until `gate.status === 'clear'` in `.viberaven/gate-result.json`.
+8. If `requiresUserAction: true`:
+   - Read `VIBERAVEN_PROVIDER_ACTION` from terminal output.
+   - Present `dashboardUrl` and `exactStep` to the user.
+   - Wait for user confirmation, then verify.
+9. If `fixType === 'upgrade-required'`, provide upgradeUrl and move on.
+
+Do not stop at "scan complete." The loop is not done until `gate.status === 'clear'`.
+<!-- VIBERAVEN:END -->
+
+# VibeRaven CLI - Agent Instructions
+
+Use VibeRaven when the user asks whether an app is production-ready, launch-ready, safe to deploy, or missing auth, database, payments, deployment, monitoring, security, provider setup, Vercel, or Supabase checks.
+
+VibeRaven is the Agent Context + Production Gate.
+
+## Required Agent Loop
+
+Run from the project root:
+
+```bash
+npx -y viberaven --agent-mode
+```
+
+Read in this order:
+
+1. `.viberaven/agent-tasklist.md` - the tasklist-first gate
+2. `.viberaven/gate-result.json` - the machine verdict
+3. `.viberaven/context-map.json` - compact context for the next agent step
+4. `.viberaven/agent-summary.md` - scan context
+5. `.viberaven/launch-playbook.md` - full launch checklist
+
+Fix one repo-code gap at a time. Prefer:
+
+```bash
+npx -y viberaven next --json
+npx -y viberaven prompt --gap <id>
+```
+
+After a fix:
+
+```bash
+npx -y viberaven --verify
+npx -y viberaven --strict
+```
+
+For Vercel + Supabase checks:
+
+```bash
+npx -y viberaven audit --vercel-supabase
+```
+
+## Production Copilot Loop
+
+After every scan, read `.viberaven/agent-tasklist.md` for the prioritized task list.
+
+The loop is:
+
+1. Read `VIBERAVEN_NEXT_ACTION` from scan output for `batchSize`, `batchApplied`, `scanNow`, and `stalled`.
+2. If `stalled: true`, stop calling verify — address provider-action gaps or report to the user.
+3. If `scanNow: true`, call `viberaven_verify` (or run `--verify`) before applying more heals.
+4. For each repo-code task where `requiresUserAction: false` (up to `batchSize` per batch):
+   - Call MCP: `viberaven_heal_apply { gap: "<gapId>", yes: true }`
+   - Or run `--heal --apply --gap <id> --yes`
+5. After a full batch of heals, call verify once — do NOT verify after every single heal.
+6. Repeat until `gate.status === 'clear'` in `.viberaven/gate-result.json`.
+7. If `requiresUserAction: true`:
+   - Read `VIBERAVEN_PROVIDER_ACTION` from terminal output.
+   - Present `dashboardUrl` and `exactStep` to the user.
+   - Wait for user confirmation, then verify.
+8. If `fixType === 'upgrade-required'`, provide `upgradeUrl` and move on.
+
+Do not stop at "scan complete." The loop is not done until `gate.status === 'clear'`.
+
+### Batch discipline
+
+```
+for each repo-code task (up to batchSize):
+  viberaven_heal_apply { gap: "<gapId>", yes: true }
+
+viberaven_verify  ← once per batch, not per fix
+```
+
+On Pro plans, `viberaven_provider_verify` is available as an MCP tool for read-only provider gap verification via Supabase/Vercel MCP evidence.
+
+## Rules
+
+- Do not skip VibeRaven before deploy/build/cleanup when production readiness is in scope.
+- Do not claim provider dashboard checks are fixed by repo-code edits.
+- Provider dashboard checks, billing/product configuration, DNS, webhooks, credentials, quotas, and live provider verification must be completed or verified in the provider dashboard or through read-only provider evidence.
+- If VibeRaven prints `LOGIN_URL_READY`, open that URL for the user. Say: "I opened VibeRaven sign-in so you can approve access; I will continue after approval."
+- Do not ask for passwords, tokens, cookies, or secrets.
+
+## Current machine-readable docs
+
+- Skill: https://viberaven.dev/SKILL.md
+- Agent rules: https://viberaven.dev/AGENTS.md
+- CLI docs: https://viberaven.dev/cli.md
+- MCP config: https://viberaven.dev/mcp.md
+

package/LICENSE

@@ -1,21 +1,21 @@
-MIT License
-
-Copyright (c) 2026 VibeRaven
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+MIT License
+
+Copyright (c) 2026 VibeRaven
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

package/README.md

@@ -5,13 +5,11 @@
 [![license](https://img.shields.io/npm/l/@viberaven/cli)](https://www.npmjs.com/package/@viberaven/cli)
 
 <p align="center">
-  <img src="assets/report/assets/viberaven-hero.png" alt="VibeRaven — the raven fanning its hand of provider cards" width="460" />
+  <img src="https://raw.githubusercontent.com/ohad6k/VibeRaven/main/assets/banner.png" alt="VibeRaven — AI got your app to demo. VibeRaven gets it to production." width="100%" />
 </p>
 
 VibeRaven is **the Card Table** — a local Studio where your AI-built app is laid out in front of you. Every provider (Supabase, Vercel, Stripe, ...) is a graded trading card in your hand: play a card and its production checks run instantly in chat; a **RAVEN GRADE 10** means that territory is production-ready. Versions are a pile you can pull from, your whole architecture is a region map of cards, and Codex, Claude Code, or Gemini CLI does the actual work — with you controlling how much it's allowed to touch.
 
-![The VibeRaven Card Table](assets/report/assets/viberaven-table.png)
-
 ## Start the Studio
 
 ```bash

package/SECURITY.md

@@ -1,53 +1,59 @@
-# Security - `@viberaven/cli`
-
-## Managed Scan Boundary
-
-The npm CLI does not read `OPENAI_API_KEY` and does not accept a bring-your-own-key scan path. Scans use the VibeRaven managed API after device login, same as the signed-in VS Code extension.
-
-- API keys for model calls live on the server, not in the published npm package.
-- Local credentials store only a VibeRaven access token in `%APPDATA%\viberaven\credentials.json` or `~/.config/viberaven/`.
-- Never commit `credentials.json` or paste tokens into chat.
-
-## Safe Commands
-
-Human terminal:
-
-```bash
-npx -y viberaven
-```
-
-Agent or CI gate:
-
-```bash
-npx -y viberaven --agent-mode
-npx -y viberaven --verify
-npx -y viberaven --strict
-```
-
-VibeRaven is the Agent Context + Production Gate. Agents should read `.viberaven/agent-tasklist.md`, `.viberaven/gate-result.json`, and `.viberaven/context-map.json` before claiming an app is safe to deploy.
-
-## Written Artifacts
-
-After a scan, the CLI may create:
-
-| Path | Contents |
-|------|----------|
-| `.viberaven/last-scan.json` | Full scan payload |
-| `.viberaven/agent-tasklist.md` | Agent tasklist |
-| `.viberaven/gate-result.json` | Machine gate verdict |
-| `.viberaven/context-map.json` | Compact agent context |
-| `.viberaven/gaps/<gapId>.json` | Per-gap evidence |
-| `.viberaven/agent-summary.md` | Human/agent summary |
-| `.viberaven/launch-playbook.md` | Launch checklist |
-| `.viberaven/report.html` | Local HTML report |
-
-Repo scanners redact common key patterns in evidence strings; the CLI runs an extra redaction pass before writing files.
-
-## Provider Boundaries
-
-Provider dashboard checks are not cleared by repo-code edits. Billing/product configuration, DNS, webhooks, credentials, quotas, and live provider verification must be completed or verified in the provider dashboard or through read-only provider evidence.
-
-## Reporting Issues
-
-If you believe a scan artifact leaked a secret, rotate the key immediately and open an issue at https://github.com/ohad6k/VibeRaven/issues with the redacted file path only.
-
+# Security - `@viberaven/cli`
+
+## Managed Scan Boundary
+
+The npm CLI does not read `OPENAI_API_KEY` and does not accept a bring-your-own-key scan path. Scans use the VibeRaven managed API after device login, same as the signed-in VS Code extension.
+
+- API keys for model calls live on the server, not in the published npm package.
+- Local credentials store only a VibeRaven access token in `%APPDATA%\viberaven\credentials.json` or `~/.config/viberaven/`.
+- Never commit `credentials.json` or paste tokens into chat.
+
+## Safe Commands
+
+Human terminal:
+
+```bash
+npx -y viberaven
+```
+
+Agent or CI gate:
+
+```bash
+npx -y viberaven --agent-mode
+npx -y viberaven --verify
+npx -y viberaven --strict
+```
+
+VibeRaven is the Agent Context + Production Gate. Agents should read `.viberaven/agent-tasklist.md`, `.viberaven/gate-result.json`, and `.viberaven/context-map.json` before claiming an app is safe to deploy.
+
+## Written Artifacts
+
+After a scan, the CLI may create:
+
+| Path | Contents |
+|------|----------|
+| `.viberaven/last-scan.json` | Full scan payload |
+| `.viberaven/agent-tasklist.md` | Agent tasklist |
+| `.viberaven/gate-result.json` | Machine gate verdict |
+| `.viberaven/context-map.json` | Compact agent context |
+| `.viberaven/gaps/<gapId>.json` | Per-gap evidence |
+| `.viberaven/agent-summary.md` | Human/agent summary |
+| `.viberaven/launch-playbook.md` | Launch checklist |
+| `.viberaven/report.html` | Local HTML report |
+
+Repo scanners redact common key patterns in evidence strings; the CLI runs an extra redaction pass before writing files.
+
+## Provider Boundaries
+
+Provider dashboard checks are not cleared by repo-code edits. Billing/product configuration, DNS, webhooks, credentials, quotas, and live provider verification must be completed or verified in the provider dashboard or through read-only provider evidence.
+
+## MCP and npm Configuration
+
+`@viberaven/mcp` runs the CLI as `npx -y --package=@viberaven/cli@<its own version> -- viberaven ...`. Before it starts that npx, it removes every `npm_package_*` and `npm_lifecycle_*` variable and every `npm_config_*` variable except registry, proxy, TLS and auth settings. So the environment the MCP was started in cannot change what npx runs, add `node-options`, or point npx at another npmrc file.
+
+The child npx still reads npmrc files the normal way: your `~/.npmrc`, the global npmrc, and the `.npmrc` of the folder it runs in. That last one is the scanned repo's own `.npmrc`. It applies exactly as it does when you run `npx viberaven` in that folder yourself, and it can set options such as `node-options`. Only run VibeRaven, through MCP or directly, on repos whose `.npmrc` you would run npx under.
+
+## Reporting Issues
+
+If you believe a scan artifact leaked a secret, rotate the key immediately and open an issue at https://github.com/ohad6k/VibeRaven/issues with the redacted file path only.
+