@vessel-dsp/compiler 0.6.0 → 0.8.0

package/dist/registry-data/led.js

@@ -0,0 +1,415 @@
+// LED colour-default registry data: owner bench 2026-10-20 (measured IS and n;
+// derived VT and, for the two-point colours, derived Rs -- assumed fit constants,
+// never measurements).
+//
+// Keying by packet spelling (whole folded part ids packets already use):
+// - red: "RED LED" (marshall-blues-breaker LED1, 9 V power indicator through 470 ohm),
+//   "5mm red LED" (pigtronix-philosophers-tone D13), "LED-RED" (bk-butler-tube-driver
+//   D_EFFECT_LED_RED, EFFECT 5 mm red led; marshall-guvnor-drivemaster D2/D3, `kind:
+//   diode` red clipper pair -- `Color` is read for `kind: led` only, so the id stays
+//   their only key).
+// - green: "LED-GREEN" (bk-butler-tube-driver D_POWER_LED_GREEN, POWER 5 mm green led).
+// - blue: reached via typed `Color` only (the one packet spelling, keeley-compressor-plus
+//   "3mm blue", states vocabulary `Color: blue`, so the id was removed as redundant).
+//
+// One record per closed-vocabulary colour (`red`, `yellow`, `green`, `blue`, `white`),
+// resolved two ways through the existing diode lookup: by whole folded PartNumber for
+// the packet spellings above, and by typed `Color` (see `LED_COLOUR_RECORD_ID`) for any
+// other `kind: led` device that states a vocabulary colour. A registry PartNumber law
+// always wins over colour; typed parameters declared in the document win over both.
+// No packet spells white or yellow in a part id, so those records carry the colour
+// word as their registry id (no packet uses it; they are reached only via `Color`).
+//
+// Not keyed and landed nowhere: bare "LED" (colourless), "5mm LED" (colourless),
+// "unspecified-indicator-led (...)" (explicitly unknown part), empty PartNumber, and
+// every manufacturer part number (LN28RP, SLP-135B, GL-32AR, ...: real parts the bench
+// kit cannot speak for).
+//
+// Every record states `thermalVoltage: 0.025852` explicitly (the VT the fit was referred
+// to; the LED class default is 0.05, with which the engine does not reproduce these Vf at
+// all) and its own fitted `seriesResistance` (the 2.0 ohm LED default is a placeholder,
+// not a measurement). IS depends exponentially on n: each triple ships as fitted,
+// digits unrounded, one fit per record. White, blue and green fit both evidence
+// files (A/B from the identified four LEDs per colour, C/D from one unidentified
+// LED per size from the same bags); red and yellow keep the first-session two-point
+// pair (Rs fixed at the 2.0 ohm default, valid about 1.4 to 11 mA only).
+import { definePartData } from "./loader.js";
+const LED_INSTRUMENT = "UNI-T UT107, DC volts. Every voltage was entered to 0.01 V, so the effective " +
+    "count is 10 mV (2 V or 20 V range not recorded)";
+const EVIDENCE_FIRST_PATH = "packet-study/led-default/measurements/2026-10-20-led-default.json";
+const EVIDENCE_FIRST_SHA256 = "72abc43aa3d562351212dd6045e4bbf1914cf4e660dfe0e4288644c7f1f7b37a";
+const EVIDENCE_SECOND_PATH = "packet-study/led-default/measurements/2026-10-20-led-default-cd-points.json";
+const EVIDENCE_SECOND_SHA256 = "d0c5560161745f40616b0f0ed7852edfe6734029bb4a3105bc4503a737b6fb41";
+const FOUR_POINT_CONDITIONS = "USB 5 V breadboard shield 4.99 V read once; first session 2.2 kohm and 270 ohm, " +
+    "second session 20 kohm and 150 ohm, all as typed exactly nominal, probably not metered " +
+    "(kit tolerance 1 %); room 20 C; 4 LEDs per colour at A/B (2 per size, one kit, maker not " +
+    "recorded) plus one unidentified LED per size at C/D (same bags, may not be among the four)";
+const FOUR_POINT_SOURCE_TAIL = `Evidence ${EVIDENCE_FIRST_PATH} sha256 ${EVIDENCE_FIRST_SHA256} and ` +
+    `${EVIDENCE_SECOND_PATH} sha256 ${EVIDENCE_SECOND_SHA256}, schema ` +
+    "vesseldsp.junction-default-measurement.v1 perDevice isEngine/nEngine pooled over every " +
+    "sample at the engine VT 0.025852 V.";
+const RED_CONDITIONS = "USB 5 V breadboard shield measured 4.99 V; 2.2 kohm and 270 ohm resistors as typed, " +
+    "exactly nominal, probably not metered (kit tolerance 1 %); room 20 C; 4 red LEDs " +
+    "(2 per size, one kit, maker not recorded); anchors 1.435 mA at 1.8275 V and 11.07 mA " +
+    "at 1.9925 V (pooled means)";
+// Assumed fit constants, never measurements (derived basis): the thermal voltage the
+// IS and n were referred to, and the series resistance fixed for a two-point fit.
+const VT_DERIVATION = "The engine constant 0.025852 V the IS and n fit was referred to: IS and n " +
+    "reproduce the bench Vf only at this value (the LED class default is 0.05 V). " +
+    "Assumed, not measured.";
+const TWO_POINT_RS_DERIVATION = "Fixed at the 2.0 ohm LED class default for the two-point fit, so the stamp must " +
+    "run at 2.0 ohm. Assumed, not measured.";
+export const ledRegistryRecords = definePartData([
+    {
+        // Red indicator default: first-session two-point pair, Rs fixed at the 2.0 ohm
+        // class default (which is then correct for it). Valid about 1.4 to 11 mA only:
+        // the marshall-blues-breaker power indicator this keys runs about 15 mA off 9 V
+        // through 470 ohm, an extrapolated use disclosed here. n 2.76 would need Rs 6.2
+        // ohm were the junction n 2, so it may carry a small version of the inflated-n
+        // structure that sank the blue/white/green pairs; unverified outside the anchors.
+        partIds: ["RED LED", "5mm red LED", "LED-RED"],
+        class: "led",
+        note: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner), 4 samples, maker unrecorded, two currents: the pair " +
+            "(1.1110898624e-14, 2.7587062 at Rs 2.0 ohm) holds only about 1.4 to 11 mA. " +
+            "The marshall-blues-breaker RED LED indicator runs about 15 mA (9 V through " +
+            "470 ohm), above the window: an extrapolated use. n 2.76 is above a junction " +
+            "n of 2 and unverified outside the two anchors. Published-model cross-check " +
+            "(LTspice Standard.dio, third-party library, not a manufacturer model): " +
+            "Kingbright APT1608SURCK (SMD, N 2.139, RS 2) -61 mV at 1.4 mA and -93 mV at " +
+            "11 mA (model minus measured); Fairchild QTLP690C (N 1.5, RS 6) -108 mV at " +
+            "1.4 mA and -136 mV at 11 mA.",
+        params: {
+            saturationCurrent: {
+                value: 1.1110898624e-14,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner), same sitting and fit as the emissionCoefficient " +
+                    "record (one two-point fit at the 2.0 ohm LED class default and VT 0.025852 V; " +
+                    "IS depends exponentially on n, so both digits ship as fitted). Valid about " +
+                    "1.4 to 11 mA only; unverified outside the anchors. Evidence " +
+                    `${EVIDENCE_FIRST_PATH} sha256 ${EVIDENCE_FIRST_SHA256}.`,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: RED_CONDITIONS,
+                measurementSampleCount: 4,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+            emissionCoefficient: {
+                value: 2.7587062,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner), red two-point pair (n 2.76 may carry inflated-n " +
+                    "structure; Rs fixed at 2.0 ohm). Valid about 1.4 to 11 mA only. Evidence " +
+                    `${EVIDENCE_FIRST_PATH} sha256 ${EVIDENCE_FIRST_SHA256}.`,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: RED_CONDITIONS,
+                measurementSampleCount: 4,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+            thermalVoltage: {
+                value: 0.025852,
+                basis: "derived",
+                source: "The VT the red fit was referred to (the LED class default is 0.05, with " +
+                    "which the engine does not reproduce these Vf). Evidence " +
+                    `${EVIDENCE_FIRST_PATH} sha256 ${EVIDENCE_FIRST_SHA256}.`,
+                derivation: VT_DERIVATION,
+            },
+            seriesResistance: {
+                value: 2.0,
+                basis: "derived",
+                source: "The Rs the red fit assumed (the 2.0 ohm LED class default, fixed for the " +
+                    "two-point fit, so the stamp must run at 2.0 ohm). Evidence " +
+                    `${EVIDENCE_FIRST_PATH} sha256 ${EVIDENCE_FIRST_SHA256}.`,
+                derivation: TWO_POINT_RS_DERIVATION,
+            },
+        },
+    },
+    {
+        // Green indicator default: colour-level four-point effective values over 0.13 to
+        // 13 mA. MISSES the 20 mV page limit (residual 32 mV at B): green does not follow
+        // V = a + b ln I + R I within 30 mV. Per-LED #1/#2 agreement is 0 to 10 mV in both
+        // sizes, so most of the misfit is the model form, not noise; the unidentified C/D
+        // LED explains at most about a quarter of it. Sizes agree within the fit (Rs 28.8
+        // 3 mm vs 30.8 5 mm).
+        partIds: ["LED-GREEN"],
+        class: "led",
+        note: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner), 4 + 2 samples (A/B four identified LEDs, C/D one " +
+            "unidentified LED per size from the same bags), maker unrecorded. Four-point " +
+            "effective values (5.275788e-17, 3.02001, 29.7599 ohm); residuals (model minus " +
+            "measured) -9.2 mV " +
+            "at 0.13 mA, +23.9 at 1.1 mA, -31.9 at 8 mA, +17.1 at 13 mA: green misses the " +
+            "20 mV limit (32 mV), a stated misfit of the one-diode form, not noise. No " +
+            "published model for an indicator green LED was found (manufacturer sites not " +
+            "searched).",
+        params: {
+            saturationCurrent: {
+                value: 5.275788e-17,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner) green four-point fit (V = a + n VT ln I + I Rs over " +
+                    "C 0.13 mA, A 1.1 mA, B 8 mA, D 13 mA; IS depends exponentially on n, so " +
+                    "all three digits ship as fitted). " + FOUR_POINT_SOURCE_TAIL,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: FOUR_POINT_CONDITIONS,
+                measurementSampleCount: 6,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+            emissionCoefficient: {
+                value: 3.02001,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner) green four-point fit (n 3.02 is an effective value " +
+                    "over 0.13 to 13 mA with a stated 32 mV misfit). " + FOUR_POINT_SOURCE_TAIL,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: FOUR_POINT_CONDITIONS,
+                measurementSampleCount: 6,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+            thermalVoltage: {
+                value: 0.025852,
+                basis: "derived",
+                source: "The VT the green fit was referred to (the LED class default is 0.05, with " +
+                    "which the engine does not reproduce these Vf). " + FOUR_POINT_SOURCE_TAIL,
+                derivation: VT_DERIVATION,
+            },
+            seriesResistance: {
+                value: 29.7599,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner) green four-point fit (Rs 29.76 ohm is why the " +
+                    "first-session n read 8.0; the stamp must run at the fitted Rs, not the " +
+                    "2.0 ohm class default). " + FOUR_POINT_SOURCE_TAIL,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: FOUR_POINT_CONDITIONS,
+                measurementSampleCount: 6,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+        },
+    },
+    {
+        // Blue indicator default: colour-level four-point effective values over 0.13 to
+        // 13 mA, within the 20 mV page limit (residuals +6.4/-8.3/-2.5/+4.4 mV at
+        // 1/8/0.13/13 mA, model minus measured). Weaker evidence than green's "over it":
+        // the 3 mm A/B LEDs differed by up to 50 mV at 8 mA, so the unidentified C/D LED
+        // could by itself account for the 8 mV residual. Sizes: Rs 20.3 (3 mm) vs 24.1
+        // (5 mm), within the fit's resolution; the colour default pools both per the
+        // owner's by-colour rule. Reached via typed `Color` only: the one packet spelling
+        // ("3mm blue") states vocabulary `Color: blue`, so the id was removed as redundant.
+        partIds: ["blue"],
+        class: "led",
+        note: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner), 4 + 2 samples (A/B four identified LEDs, C/D one " +
+            "unidentified LED per size from the same bags), maker unrecorded. Four-point " +
+            "effective values (8.668086e-34, 1.42282, 22.2290 ohm); residuals (model minus " +
+            "measured) +6.4 mV at 1 mA, -8.3 at 8 mA, -2.5 at 0.13 mA, +4.4 at 13 mA: " +
+            "within the 20 mV limit, but the unidentified C/D LED could by itself account " +
+            "for the residual (3 mm A/B spread reached 50 mV at 8 mA), so 'within limit' " +
+            "is weaker evidence than green's 'over it'. The keyed packet device is 3 mm; " +
+            "the record pools 3 and 5 mm per the owner's by-colour rule. Published-model " +
+            "cross-check (LTspice Standard.dio, third-party library): Microsemi UPBLED-470B " +
+            "(power LED, N 1.923, RS 32) sits +516 to +716 mV from the kit, a different " +
+            "part, not a generic blue.",
+        params: {
+            saturationCurrent: {
+                value: 8.668086e-34,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner) blue four-point fit (V = a + n VT ln I + I Rs over " +
+                    "C 0.13 mA, A 1.1 mA, B 8 mA, D 13 mA; IS depends exponentially on n, so " +
+                    "all three digits ship as fitted). " + FOUR_POINT_SOURCE_TAIL,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: FOUR_POINT_CONDITIONS,
+                measurementSampleCount: 6,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+            emissionCoefficient: {
+                value: 1.42282,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner) blue four-point fit (effective value over 0.13 to " +
+                    "13 mA). " + FOUR_POINT_SOURCE_TAIL,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: FOUR_POINT_CONDITIONS,
+                measurementSampleCount: 6,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+            thermalVoltage: {
+                value: 0.025852,
+                basis: "derived",
+                source: "The VT the blue fit was referred to (the LED class default is 0.05, with " +
+                    "which the engine does not reproduce these Vf). " + FOUR_POINT_SOURCE_TAIL,
+                derivation: VT_DERIVATION,
+            },
+            seriesResistance: {
+                value: 22.229,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner) blue four-point fit (Rs 22.229 ohm is why the " +
+                    "first-session n read 4.4; the stamp must run at the fitted Rs, not the " +
+                    "2.0 ohm class default). " + FOUR_POINT_SOURCE_TAIL,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: FOUR_POINT_CONDITIONS,
+                measurementSampleCount: 6,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+        },
+    },
+    {
+        // White indicator default: colour-level four-point effective values over 0.12 to
+        // 13 mA, within the 20 mV page limit (residuals +13.9/-18.1/-5.4/+9.6 mV at
+        // 1/8/0.13/13 mA, model minus measured). Same unidentified-C/D caveat as blue, and
+        // stronger: white sizes differ by about 14 ohm of series resistance (Rs 15.7 3 mm
+        // vs 29.9 5 mm, about 160 mV at 13 mA), so the colour default pools two sizes that
+        // do not agree, per the owner's by-colour rule. Reached via typed `Color` only:
+        // no packet spells white in a part id.
+        partIds: ["white"],
+        class: "led",
+        note: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner), 4 + 2 samples (A/B four identified LEDs, C/D one " +
+            "unidentified LED per size from the same bags), maker unrecorded. Four-point " +
+            "effective values (4.056687e-26, 1.98811, 22.5033 ohm); residuals (model minus " +
+            "measured) +13.9 mV at 1 mA, -18.1 at 8 mA, -5.4 at 0.13 mA, +9.6 at 13 mA: " +
+            "within the 20 mV limit, but the unidentified C/D LED could by itself account " +
+            "for the residual, and the 3 and 5 mm samples disagree by about 14 ohm " +
+            "(160 mV at 13 mA), so a colour-only default spans both. Published-model " +
+            "cross-check (LTspice Standard.dio, third-party library, not a manufacturer " +
+            "model): Nichia NSPW500BS (5 mm; IS 0.27n, N 6.79, RS 5.65) -264 mV at " +
+            "0.12 mA, +8 at 1.05 mA, +111 at 7.6 mA, +115 at 12.8 mA; Nichia NSCW100 " +
+            "(SMD; N 9.626, RS 8.163) -338, +94, +358, +414 mV at the same currents " +
+            "(model minus measured) -- each matches the kit at one current only, and both " +
+            "carry the same large-N structure as the rejected two-point pairs.",
+        params: {
+            saturationCurrent: {
+                value: 4.056687e-26,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner) white four-point fit (V = a + n VT ln I + I Rs over " +
+                    "C 0.13 mA, A 1.1 mA, B 8 mA, D 13 mA; IS depends exponentially on n, so " +
+                    "all three digits ship as fitted). " + FOUR_POINT_SOURCE_TAIL,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: FOUR_POINT_CONDITIONS,
+                measurementSampleCount: 6,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+            emissionCoefficient: {
+                value: 1.98811,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner) white four-point fit (effective value over 0.12 to " +
+                    "13 mA). " + FOUR_POINT_SOURCE_TAIL,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: FOUR_POINT_CONDITIONS,
+                measurementSampleCount: 6,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+            thermalVoltage: {
+                value: 0.025852,
+                basis: "derived",
+                source: "The VT the white fit was referred to (the LED class default is 0.05, with " +
+                    "which the engine does not reproduce these Vf). " + FOUR_POINT_SOURCE_TAIL,
+                derivation: VT_DERIVATION,
+            },
+            seriesResistance: {
+                value: 22.5033,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner) white four-point fit (Rs 22.5033 ohm is why the " +
+                    "first-session n read 5.2; the stamp must run at the fitted Rs, not the " +
+                    "2.0 ohm class default). " + FOUR_POINT_SOURCE_TAIL,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: FOUR_POINT_CONDITIONS,
+                measurementSampleCount: 6,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+        },
+    },
+    {
+        // Yellow indicator default: first-session two-point pair, Rs fixed at the 2.0 ohm
+        // class default (which is then correct for it). Valid about 1.4 to 11 mA only;
+        // unverified outside the two anchors. Reached via typed `Color` only: no packet
+        // spells yellow in a part id. No published cross-check found (no model for an
+        // indicator yellow LED in LTspice Standard.dio; manufacturer sites not searched).
+        partIds: ["yellow"],
+        class: "led",
+        note: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner), 4 samples, maker unrecorded, two currents: the pair " +
+            "(2.1187081810e-25, 1.4664285 at Rs 2.0 ohm) holds only about 1.4 to 11 mA. " +
+            "n 1.47 needs no series resistance, so the two-point form is consistent at the " +
+            "anchors; unverified outside them all the same.",
+        params: {
+            saturationCurrent: {
+                value: 2.1187081810e-25,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner), same sitting and fit as the emissionCoefficient " +
+                    "record (one two-point fit at the 2.0 ohm LED class default and VT 0.025852 V; " +
+                    "IS depends exponentially on n, so both digits ship as fitted). Valid about " +
+                    "1.4 to 11 mA only; unverified outside the anchors. Evidence " +
+                    `${EVIDENCE_FIRST_PATH} sha256 ${EVIDENCE_FIRST_SHA256}.`,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: "USB 5 V breadboard shield measured 4.99 V; 2.2 kohm and 270 ohm resistors " +
+                    "as typed, exactly nominal, probably not metered (kit tolerance 1 %); room " +
+                    "20 C; 4 yellow LEDs (2 per size, one kit, maker not recorded); anchors " +
+                    "1.40 mA at 1.9075 V and 11.03 mA at 2.005 V (pooled means)",
+                measurementSampleCount: 4,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+            emissionCoefficient: {
+                value: 1.4664285,
+                basis: "measured",
+                source: "Owner bench 2026-10-20 (measured by Joseph Cheng, the project owner) yellow two-point pair (n 1.47 needs no series " +
+                    "resistance; Rs fixed at 2.0 ohm). Valid about 1.4 to 11 mA only. Evidence " +
+                    `${EVIDENCE_FIRST_PATH} sha256 ${EVIDENCE_FIRST_SHA256}.`,
+                measurementInstrument: LED_INSTRUMENT,
+                measurementConditions: "USB 5 V breadboard shield measured 4.99 V; 2.2 kohm and 270 ohm resistors " +
+                    "as typed, exactly nominal, probably not metered (kit tolerance 1 %); room " +
+                    "20 C; 4 yellow LEDs (2 per size, one kit, maker not recorded); anchors " +
+                    "1.40 mA at 1.9075 V and 11.03 mA at 2.005 V (pooled means)",
+                measurementSampleCount: 4,
+                measurementDate: "2026-10-20",
+                measurementEvidencePath: EVIDENCE_FIRST_PATH,
+                measurementEvidenceSha256: EVIDENCE_FIRST_SHA256,
+            },
+            thermalVoltage: {
+                value: 0.025852,
+                basis: "derived",
+                source: "The VT the yellow fit was referred to (the LED class default is 0.05, with " +
+                    "which the engine does not reproduce these Vf). Evidence " +
+                    `${EVIDENCE_FIRST_PATH} sha256 ${EVIDENCE_FIRST_SHA256}.`,
+                derivation: VT_DERIVATION,
+            },
+            seriesResistance: {
+                value: 2.0,
+                basis: "derived",
+                source: "The Rs the yellow fit assumed (the 2.0 ohm LED class default, fixed for the " +
+                    "two-point fit, so the stamp must run at 2.0 ohm). Evidence " +
+                    `${EVIDENCE_FIRST_PATH} sha256 ${EVIDENCE_FIRST_SHA256}.`,
+                derivation: TWO_POINT_RS_DERIVATION,
+            },
+        },
+    },
+]);
+/**
+ * The closed colour vocabulary's canonical registry id per colour: the first partId of
+ * the colour's `led` record. The diode case resolves a `kind: led` device's stated,
+ * in-vocabulary `Color` through this map (whole folded id, existing lookup) when no
+ * registry PartNumber law resolves; a registry PartNumber law always wins, and typed
+ * document parameters win over both. `white` and `yellow` are colour words no packet
+ * uses as a part id -- they are reached only via `Color`.
+ */
+export const LED_COLOUR_RECORD_ID = {
+    red: "RED LED",
+    yellow: "yellow",
+    green: "LED-GREEN",
+    blue: "blue",
+    white: "white",
+};
+//# sourceMappingURL=led.js.map

package/dist/registry-data/led.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"led.js","sourceRoot":"","sources":["../../src/registry-data/led.ts"],"names":[],"mappings":"AAAA,+EAA+E;AAC/E,kFAAkF;AAClF,uBAAuB;AACvB,EAAE;AACF,yEAAyE;AACzE,uFAAuF;AACvF,sFAAsF;AACtF,qFAAqF;AACrF,qFAAqF;AACrF,qBAAqB;AACrB,wFAAwF;AACxF,0FAA0F;AAC1F,sFAAsF;AACtF,EAAE;AACF,uFAAuF;AACvF,sFAAsF;AACtF,wFAAwF;AACxF,sFAAsF;AACtF,oFAAoF;AACpF,mFAAmF;AACnF,oFAAoF;AACpF,EAAE;AACF,iFAAiF;AACjF,qFAAqF;AACrF,uFAAuF;AACvF,yBAAyB;AACzB,EAAE;AACF,yFAAyF;AACzF,0FAA0F;AAC1F,wFAAwF;AACxF,kFAAkF;AAClF,gFAAgF;AAChF,iFAAiF;AACjF,oFAAoF;AACpF,yEAAyE;AAEzE,OAAO,EAAE,cAAc,EAAsB,MAAM,UAAU,CAAC;AAE9D,MAAM,cAAc,GACnB,+EAA+E;IAC/E,iDAAiD,CAAC;AAEnD,MAAM,mBAAmB,GACxB,mEAAmE,CAAC;AACrE,MAAM,qBAAqB,GAC1B,kEAAkE,CAAC;AACpE,MAAM,oBAAoB,GACzB,6EAA6E,CAAC;AAC/E,MAAM,sBAAsB,GAC3B,kEAAkE,CAAC;AAEpE,MAAM,qBAAqB,GAC1B,kFAAkF;IAClF,yFAAyF;IACzF,2FAA2F;IAC3F,4FAA4F,CAAC;AAE9F,MAAM,sBAAsB,GAC3B,YAAY,mBAAmB,WAAW,qBAAqB,OAAO;IACtE,GAAG,oBAAoB,WAAW,sBAAsB,WAAW;IACnE,yFAAyF;IACzF,qCAAqC,CAAC;AAEvC,MAAM,cAAc,GACnB,sFAAsF;IACtF,mFAAmF;IACnF,uFAAuF;IACvF,4BAA4B,CAAC;AAE9B,qFAAqF;AACrF,kFAAkF;AAClF,MAAM,aAAa,GAClB,4EAA4E;IAC5E,+EAA+E;IAC/E,wBAAwB,CAAC;AAC1B,MAAM,uBAAuB,GAC5B,kFAAkF;IAClF,wCAAwC,CAAC;AAE1C,MAAM,CAAC,MAAM,kBAAkB,GAA6B,cAAc,CAAC;IAC1E;QACC,+EAA+E;QAC/E,+EAA+E;QAC/E,gFAAgF;QAChF,gFAAgF;QAChF,+EAA+E;QAC/E,kFAAkF;QAClF,OAAO,EAAE,CAAC,SAAS,EAAE,aAAa,EAAE,SAAS,CAAC;QAC9C,KAAK,EAAE,KAAK;QACZ,IAAI,EACH,4HAA4H;YAC5H,6EAA6E;YAC7E,6EAA6E;YAC7E,8EAA8E;YAC9E,6EAA6E;YAC7E,yEAAyE;YACzE,8EAA8E;YAC9E,4EAA4E;YAC5E,8BAA8B;QAC/B,MAAM,EAAE;YACP,iBAAiB,EAAE;gBAClB,KAAK,EAAE,gBAAgB;gBACvB,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,wHAAwH;oBACxH,gFAAgF;oBAChF,6EAA6E;oBAC7E,8DAA8D;oBAC9D,GAAG,mBAAmB,WAAW,qBAAqB,GAAG;gBAC1D,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EAAE,cAAc;gBACrC,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;YACD,mBAAmB,EAAE;gBACpB,KAAK,EAAE,SAAS;gBAChB,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,wHAAwH;oBACxH,2EAA2E;oBAC3E,GAAG,mBAAmB,WAAW,qBAAqB,GAAG;gBAC1D,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EAAE,cAAc;gBACrC,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;YACD,cAAc,EAAE;gBACf,KAAK,EAAE,QAAQ;gBACf,KAAK,EAAE,SAAS;gBAChB,MAAM,EACL,0EAA0E;oBAC1E,0DAA0D;oBAC1D,GAAG,mBAAmB,WAAW,qBAAqB,GAAG;gBAC1D,UAAU,EAAE,aAAa;aACzB;YACD,gBAAgB,EAAE;gBACjB,KAAK,EAAE,GAAG;gBACV,KAAK,EAAE,SAAS;gBAChB,MAAM,EACL,2EAA2E;oBAC3E,6DAA6D;oBAC7D,GAAG,mBAAmB,WAAW,qBAAqB,GAAG;gBAC1D,UAAU,EAAE,uBAAuB;aACnC;SACD;KACD;IACD;QACC,iFAAiF;QACjF,kFAAkF;QAClF,mFAAmF;QACnF,kFAAkF;QAClF,kFAAkF;QAClF,sBAAsB;QACtB,OAAO,EAAE,CAAC,WAAW,CAAC;QACtB,KAAK,EAAE,KAAK;QACZ,IAAI,EACH,yHAAyH;YACzH,8EAA8E;YAC9E,gFAAgF;YAChF,oBAAoB;YACpB,+EAA+E;YAC/E,4EAA4E;YAC5E,+EAA+E;YAC/E,YAAY;QACb,MAAM,EAAE;YACP,iBAAiB,EAAE;gBAClB,KAAK,EAAE,YAAY;gBACnB,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,2HAA2H;oBAC3H,0EAA0E;oBAC1E,oCAAoC,GAAG,sBAAsB;gBAC9D,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EAAE,qBAAqB;gBAC5C,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;YACD,mBAAmB,EAAE;gBACpB,KAAK,EAAE,OAAO;gBACd,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,0HAA0H;oBAC1H,kDAAkD,GAAG,sBAAsB;gBAC5E,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EAAE,qBAAqB;gBAC5C,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;YACD,cAAc,EAAE;gBACf,KAAK,EAAE,QAAQ;gBACf,KAAK,EAAE,SAAS;gBAChB,MAAM,EACL,4EAA4E;oBAC5E,iDAAiD,GAAG,sBAAsB;gBAC3E,UAAU,EAAE,aAAa;aACzB;YACD,gBAAgB,EAAE;gBACjB,KAAK,EAAE,OAAO;gBACd,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,qHAAqH;oBACrH,yEAAyE;oBACzE,0BAA0B,GAAG,sBAAsB;gBACpD,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EAAE,qBAAqB;gBAC5C,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;SACD;KACD;IACD;QACC,gFAAgF;QAChF,0EAA0E;QAC1E,iFAAiF;QACjF,iFAAiF;QACjF,+EAA+E;QAC/E,6EAA6E;QAC7E,kFAAkF;QAClF,oFAAoF;QACpF,OAAO,EAAE,CAAC,MAAM,CAAC;QACjB,KAAK,EAAE,KAAK;QACZ,IAAI,EACH,yHAAyH;YACzH,8EAA8E;YAC9E,gFAAgF;YAChF,2EAA2E;YAC3E,+EAA+E;YAC/E,8EAA8E;YAC9E,8EAA8E;YAC9E,8EAA8E;YAC9E,iFAAiF;YACjF,6EAA6E;YAC7E,2BAA2B;QAC5B,MAAM,EAAE;YACP,iBAAiB,EAAE;gBAClB,KAAK,EAAE,YAAY;gBACnB,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,0HAA0H;oBAC1H,0EAA0E;oBAC1E,oCAAoC,GAAG,sBAAsB;gBAC9D,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EAAE,qBAAqB;gBAC5C,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;YACD,mBAAmB,EAAE;gBACpB,KAAK,EAAE,OAAO;gBACd,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,yHAAyH;oBACzH,UAAU,GAAG,sBAAsB;gBACpC,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EAAE,qBAAqB;gBAC5C,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;YACD,cAAc,EAAE;gBACf,KAAK,EAAE,QAAQ;gBACf,KAAK,EAAE,SAAS;gBAChB,MAAM,EACL,2EAA2E;oBAC3E,iDAAiD,GAAG,sBAAsB;gBAC3E,UAAU,EAAE,aAAa;aACzB;YACD,gBAAgB,EAAE;gBACjB,KAAK,EAAE,MAAM;gBACb,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,qHAAqH;oBACrH,yEAAyE;oBACzE,0BAA0B,GAAG,sBAAsB;gBACpD,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EAAE,qBAAqB;gBAC5C,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;SACD;KACD;IACD;QACC,iFAAiF;QACjF,4EAA4E;QAC5E,mFAAmF;QACnF,kFAAkF;QAClF,mFAAmF;QACnF,gFAAgF;QAChF,uCAAuC;QACvC,OAAO,EAAE,CAAC,OAAO,CAAC;QAClB,KAAK,EAAE,KAAK;QACZ,IAAI,EACH,yHAAyH;YACzH,8EAA8E;YAC9E,gFAAgF;YAChF,6EAA6E;YAC7E,+EAA+E;YAC/E,wEAAwE;YACxE,0EAA0E;YAC1E,6EAA6E;YAC7E,wEAAwE;YACxE,0EAA0E;YAC1E,yEAAyE;YACzE,+EAA+E;YAC/E,mEAAmE;QACpE,MAAM,EAAE;YACP,iBAAiB,EAAE;gBAClB,KAAK,EAAE,YAAY;gBACnB,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,2HAA2H;oBAC3H,0EAA0E;oBAC1E,oCAAoC,GAAG,sBAAsB;gBAC9D,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EAAE,qBAAqB;gBAC5C,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;YACD,mBAAmB,EAAE;gBACpB,KAAK,EAAE,OAAO;gBACd,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,0HAA0H;oBAC1H,UAAU,GAAG,sBAAsB;gBACpC,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EAAE,qBAAqB;gBAC5C,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;YACD,cAAc,EAAE;gBACf,KAAK,EAAE,QAAQ;gBACf,KAAK,EAAE,SAAS;gBAChB,MAAM,EACL,4EAA4E;oBAC5E,iDAAiD,GAAG,sBAAsB;gBAC3E,UAAU,EAAE,aAAa;aACzB;YACD,gBAAgB,EAAE;gBACjB,KAAK,EAAE,OAAO;gBACd,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,uHAAuH;oBACvH,yEAAyE;oBACzE,0BAA0B,GAAG,sBAAsB;gBACpD,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EAAE,qBAAqB;gBAC5C,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;SACD;KACD;IACD;QACC,kFAAkF;QAClF,+EAA+E;QAC/E,gFAAgF;QAChF,8EAA8E;QAC9E,kFAAkF;QAClF,OAAO,EAAE,CAAC,QAAQ,CAAC;QACnB,KAAK,EAAE,KAAK;QACZ,IAAI,EACH,4HAA4H;YAC5H,6EAA6E;YAC7E,gFAAgF;YAChF,gDAAgD;QACjD,MAAM,EAAE;YACP,iBAAiB,EAAE;gBAClB,KAAK,EAAE,gBAAgB;gBACvB,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,wHAAwH;oBACxH,gFAAgF;oBAChF,6EAA6E;oBAC7E,8DAA8D;oBAC9D,GAAG,mBAAmB,WAAW,qBAAqB,GAAG;gBAC1D,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EACpB,4EAA4E;oBAC5E,4EAA4E;oBAC5E,yEAAyE;oBACzE,4DAA4D;gBAC7D,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;YACD,mBAAmB,EAAE;gBACpB,KAAK,EAAE,SAAS;gBAChB,KAAK,EAAE,UAAU;gBACjB,MAAM,EACL,qHAAqH;oBACrH,4EAA4E;oBAC5E,GAAG,mBAAmB,WAAW,qBAAqB,GAAG;gBAC1D,qBAAqB,EAAE,cAAc;gBACrC,qBAAqB,EACpB,4EAA4E;oBAC5E,4EAA4E;oBAC5E,yEAAyE;oBACzE,4DAA4D;gBAC7D,sBAAsB,EAAE,CAAC;gBACzB,eAAe,EAAE,YAAY;gBAC7B,uBAAuB,EAAE,mBAAmB;gBAC5C,yBAAyB,EAAE,qBAAqB;aAChD;YACD,cAAc,EAAE;gBACf,KAAK,EAAE,QAAQ;gBACf,KAAK,EAAE,SAAS;gBAChB,MAAM,EACL,6EAA6E;oBAC7E,0DAA0D;oBAC1D,GAAG,mBAAmB,WAAW,qBAAqB,GAAG;gBAC1D,UAAU,EAAE,aAAa;aACzB;YACD,gBAAgB,EAAE;gBACjB,KAAK,EAAE,GAAG;gBACV,KAAK,EAAE,SAAS;gBAChB,MAAM,EACL,8EAA8E;oBAC9E,6DAA6D;oBAC7D,GAAG,mBAAmB,WAAW,qBAAqB,GAAG;gBAC1D,UAAU,EAAE,uBAAuB;aACnC;SACD;KACD;CACD,CAAC,CAAC;AAEH;;;;;;;GAOG;AACH,MAAM,CAAC,MAAM,oBAAoB,GAAG;IACnC,GAAG,EAAE,SAAS;IACd,MAAM,EAAE,QAAQ;IAChB,KAAK,EAAE,WAAW;IAClB,IAAI,EAAE,MAAM;IACZ,KAAK,EAAE,OAAO;CACL,CAAC"}

package/dist/registry-data/schema.d.ts

@@ -9,6 +9,7 @@ export declare const CLASS_PARAM_SCHEMAS: {
     readonly opamp: readonly ["openLoopGain", "gainBandwidthHz", "outputSwingDropHighVolts", "outputSwingDropLowVolts"];
     readonly regulator: readonly ["volts", "sourceOhms"];
     readonly "charge-pump": readonly ["sourceOhms", "chargePumpLossVolts"];
+    readonly ujt: readonly ["intrinsicStandoffRatio", "interbaseResistanceOhms"];
 };
 /** The closed set of part classes the registry holds parameters for. */
 export type PartClassName = keyof typeof CLASS_PARAM_SCHEMAS;
@@ -30,8 +31,12 @@ export declare function classParamNames(cls: PartClassName): readonly string[];
  * - `jfet` / `mosfet`: thresholdVolts (pinch-off) and transconductance (gain). Geometry and
  *   gate refinements (channelLengthModulation, subthresholdVolts, gate terms) keep defaults.
  * - `diode` / `led`: saturationCurrent (knee position) and emissionCoefficient (knee slope).
- *   thermalVoltage is a constant, breakdownVolts 0 is an ordinary diode, seriesResistance
- *   keeps its default.
+ *   Silicon leaves thermalVoltage omitted (the engine constant), breakdownVolts 0 is an
+ *   ordinary diode, seriesResistance keeps its class default (1.0 ohm diode, 2.0 ohm LED).
+ *   An LED record states the VT its fit was referred to and its fitted Rs explicitly.
+ *   A `custom` LED override must state the full quad: an (IS, n) measured at the engine
+ *   VT silently mis-stamps when VT falls back to the 0.05 class default, and an Rs left
+ *   at 2.0 ohm repeats the inflated-n failure the four-point fits exposed.
  * - `zener`: the diode pair plus breakdownVolts -- the breakdown IS the part, and without it
  *   the law stamps an ordinary diode.
  * - `opamp`: openLoopGain and gainBandwidthHz. The swing pair is deliberately absent: per the
@@ -39,6 +44,8 @@ export declare function classParamNames(cls: PartClassName): readonly string[];
  * - `regulator`: volts -- the rail is the part; sourceOhms keeps the supply convention.
  * - `charge-pump`: sourceOhms and chargePumpLossVolts -- both shape the derived rail, and an
  *   unknown pump has no safe default for either.
+ * - `ujt`: intrinsicStandoffRatio and interbaseResistanceOhms -- the tap fraction and the
+ *   bar are the whole part model (emitter diode and modulation are law structure).
  */
 export declare const REQUIRED_CLASS_PARAMS: {
     readonly bjt: readonly ["saturationCurrent", "forwardBeta"];
@@ -46,10 +53,11 @@ export declare const REQUIRED_CLASS_PARAMS: {
     readonly mosfet: readonly ["thresholdVolts", "transconductance"];
     readonly diode: readonly ["saturationCurrent", "emissionCoefficient"];
     readonly zener: readonly ["saturationCurrent", "emissionCoefficient", "breakdownVolts"];
-    readonly led: readonly ["saturationCurrent", "emissionCoefficient"];
+    readonly led: readonly ["saturationCurrent", "emissionCoefficient", "thermalVoltage", "seriesResistance"];
     readonly opamp: readonly ["openLoopGain", "gainBandwidthHz"];
     readonly regulator: readonly ["volts"];
     readonly "charge-pump": readonly ["sourceOhms", "chargePumpLossVolts"];
+    readonly ujt: readonly ["intrinsicStandoffRatio", "interbaseResistanceOhms"];
 };
 /** The parameters a `custom` override must supply for a class, in schema order. */
 export declare function requiredClassParams(cls: PartClassName): readonly string[];

package/dist/registry-data/schema.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"schema.d.ts","sourceRoot":"","sources":["../../src/registry-data/schema.ts"],"names":[],"mappings":"AA6BA,yFAAyF;AACzF,eAAO,MAAM,mBAAmB;;;;;;;;;;CAuDtB,CAAC;AAEX,wEAAwE;AACxE,MAAM,MAAM,aAAa,GAAG,MAAM,OAAO,mBAAmB,CAAC;AAE7D,iEAAiE;AACjE,wBAAgB,eAAe,CAAC,GAAG,EAAE,aAAa,GAAG,SAAS,MAAM,EAAE,CAErE;AAED;;;;;;;;;;;;;;;;;;;;;;;;;GAyBG;AACH,eAAO,MAAM,qBAAqB;;;;;;;;;;CAU2B,CAAC;AAE9D,mFAAmF;AACnF,wBAAgB,mBAAmB,CAAC,GAAG,EAAE,aAAa,GAAG,SAAS,MAAM,EAAE,CAEzE"}
+{"version":3,"file":"schema.d.ts","sourceRoot":"","sources":["../../src/registry-data/schema.ts"],"names":[],"mappings":"AAqCA,yFAAyF;AACzF,eAAO,MAAM,mBAAmB;;;;;;;;;;;CAwDtB,CAAC;AAEX,wEAAwE;AACxE,MAAM,MAAM,aAAa,GAAG,MAAM,OAAO,mBAAmB,CAAC;AAE7D,iEAAiE;AACjE,wBAAgB,eAAe,CAAC,GAAG,EAAE,aAAa,GAAG,SAAS,MAAM,EAAE,CAErE;AAED;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA+BG;AACH,eAAO,MAAM,qBAAqB;;;;;;;;;;;CAW2B,CAAC;AAE9D,mFAAmF;AACnF,wBAAgB,mBAAmB,CAAC,GAAG,EAAE,aAAa,GAAG,SAAS,MAAM,EAAE,CAEzE"}

package/dist/registry-data/schema.js

@@ -11,7 +11,10 @@
 //   law's numeric fields (`gateSaturationCurrent: 0` is the MOSFET's insulated gate).
 // - `diode` / `zener` / `led`: all three lower to the `diode` law; a zener adds a reverse
 //   knee (`breakdownVolts`), an LED adds `isLed`, and a Schottky is a diode with a low
-//   forward knee -- all fit these five numeric names.
+//   forward knee -- all fit these five numeric names. Silicon records omit
+//   `thermalVoltage` (the engine constant 0.025852 V, not a per-part figure); LED records
+//   state it explicitly, because the LED class default is 0.05 V and each LED fit was
+//   referred to 0.025852 V.
 // - `opamp`: the `ideal-opamp` law's numeric part facts. `openLoopGain` is listed because it
 //   is a class parameter (stage 2 must allow overriding it) even though stage 1 keeps its
 //   values in `part-catalog.ts` code; `gainBandwidthHz` and the swing pair move to data now.
@@ -20,6 +23,11 @@
 // - `charge-pump`: a switched-capacitor inverter section plus the entry-level loss term the
 //   `pumpDerivation` reads. `volts` is deliberately NOT a parameter: the rail is derived per
 //   circuit from the input node, and the `volts: 0` in each entry is an unused placeholder.
+// - `ujt`: the unijunction transistor's own two facts -- the tap fraction (intrinsic
+//   standoff ratio eta) and the bar resistance (interbase resistance Rbb). The emitter
+//   junction is a silicon diode by construction (law constants, like the JFET gate's
+//   stated silicon-junction current) and the conductivity modulation is the lowering's
+//   business (it needs a hysteretic switch stamp, so neither is a per-part parameter).
 // 
 // Structural (non-numeric) law fields -- `polarity`, `channel`, the swing `translation` and
 // printed condition, rails, pinouts -- stay in code at stage 1: a cited value is a number,
@@ -82,6 +90,7 @@ export const CLASS_PARAM_SCHEMAS = {
     ],
     regulator: ["volts", "sourceOhms"],
     "charge-pump": ["sourceOhms", "chargePumpLossVolts"],
+    ujt: ["intrinsicStandoffRatio", "interbaseResistanceOhms"],
 };
 /** The accepted parameter names for a class, in schema order. */
 export function classParamNames(cls) {
@@ -103,8 +112,12 @@ export function classParamNames(cls) {
  * - `jfet` / `mosfet`: thresholdVolts (pinch-off) and transconductance (gain). Geometry and
  *   gate refinements (channelLengthModulation, subthresholdVolts, gate terms) keep defaults.
  * - `diode` / `led`: saturationCurrent (knee position) and emissionCoefficient (knee slope).
- *   thermalVoltage is a constant, breakdownVolts 0 is an ordinary diode, seriesResistance
- *   keeps its default.
+ *   Silicon leaves thermalVoltage omitted (the engine constant), breakdownVolts 0 is an
+ *   ordinary diode, seriesResistance keeps its class default (1.0 ohm diode, 2.0 ohm LED).
+ *   An LED record states the VT its fit was referred to and its fitted Rs explicitly.
+ *   A `custom` LED override must state the full quad: an (IS, n) measured at the engine
+ *   VT silently mis-stamps when VT falls back to the 0.05 class default, and an Rs left
+ *   at 2.0 ohm repeats the inflated-n failure the four-point fits exposed.
  * - `zener`: the diode pair plus breakdownVolts -- the breakdown IS the part, and without it
  *   the law stamps an ordinary diode.
  * - `opamp`: openLoopGain and gainBandwidthHz. The swing pair is deliberately absent: per the
@@ -112,6 +125,8 @@ export function classParamNames(cls) {
  * - `regulator`: volts -- the rail is the part; sourceOhms keeps the supply convention.
  * - `charge-pump`: sourceOhms and chargePumpLossVolts -- both shape the derived rail, and an
  *   unknown pump has no safe default for either.
+ * - `ujt`: intrinsicStandoffRatio and interbaseResistanceOhms -- the tap fraction and the
+ *   bar are the whole part model (emitter diode and modulation are law structure).
  */
 export const REQUIRED_CLASS_PARAMS = {
     bjt: ["saturationCurrent", "forwardBeta"],
@@ -119,10 +134,11 @@ export const REQUIRED_CLASS_PARAMS = {
     mosfet: ["thresholdVolts", "transconductance"],
     diode: ["saturationCurrent", "emissionCoefficient"],
     zener: ["saturationCurrent", "emissionCoefficient", "breakdownVolts"],
-    led: ["saturationCurrent", "emissionCoefficient"],
+    led: ["saturationCurrent", "emissionCoefficient", "thermalVoltage", "seriesResistance"],
     opamp: ["openLoopGain", "gainBandwidthHz"],
     regulator: ["volts"],
     "charge-pump": ["sourceOhms", "chargePumpLossVolts"],
+    ujt: ["intrinsicStandoffRatio", "interbaseResistanceOhms"],
 };
 /** The parameters a `custom` override must supply for a class, in schema order. */
 export function requiredClassParams(cls) {

package/dist/registry-data/schema.js.map

@@ -1 +1 @@
-{"version":3,"file":"schema.js","sourceRoot":"","sources":["../../src/registry-data/schema.ts"],"names":[],"mappings":"AAAA,wCAAwC;AACxC,GAAG;AACH,0FAA0F;AAC1F,4FAA4F;AAC5F,wFAAwF;AACxF,yFAAyF;AACzF,2EAA2E;AAC3E,GAAG;AACH,qFAAqF;AACrF,4FAA4F;AAC5F,sFAAsF;AACtF,0FAA0F;AAC1F,uFAAuF;AACvF,sDAAsD;AACtD,6FAA6F;AAC7F,0FAA0F;AAC1F,6FAA6F;AAC7F,0FAA0F;AAC1F,uCAAuC;AACvC,4FAA4F;AAC5F,6FAA6F;AAC7F,4FAA4F;AAC5F,GAAG;AACH,4FAA4F;AAC5F,2FAA2F;AAC3F,2FAA2F;AAC3F,0FAA0F;AAC1F,cAAc;AAEd,yFAAyF;AACzF,MAAM,CAAC,MAAM,mBAAmB,GAAG;IAClC,GAAG,EAAE;QACJ,mBAAmB;QACnB,aAAa;QACb,aAAa;QACb,gBAAgB;QAChB,aAAa;KACb;IACD,IAAI,EAAE;QACL,gBAAgB;QAChB,kBAAkB;QAClB,yBAAyB;QACzB,mBAAmB;QACnB,uBAAuB;QACvB,gBAAgB;QAChB,gBAAgB;KAChB;IACD,MAAM,EAAE;QACP,gBAAgB;QAChB,kBAAkB;QAClB,yBAAyB;QACzB,mBAAmB;QACnB,uBAAuB;QACvB,gBAAgB;QAChB,gBAAgB;KAChB;IACD,KAAK,EAAE;QACN,mBAAmB;QACnB,qBAAqB;QACrB,gBAAgB;QAChB,gBAAgB;QAChB,kBAAkB;KAClB;IACD,KAAK,EAAE;QACN,mBAAmB;QACnB,qBAAqB;QACrB,gBAAgB;QAChB,gBAAgB;QAChB,kBAAkB;KAClB;IACD,GAAG,EAAE;QACJ,mBAAmB;QACnB,qBAAqB;QACrB,gBAAgB;QAChB,gBAAgB;QAChB,kBAAkB;KAClB;IACD,KAAK,EAAE;QACN,cAAc;QACd,iBAAiB;QACjB,0BAA0B;QAC1B,yBAAyB;KACzB;IACD,SAAS,EAAE,CAAC,OAAO,EAAE,YAAY,CAAC;IAClC,aAAa,EAAE,CAAC,YAAY,EAAE,qBAAqB,CAAC;CAC3C,CAAC;AAKX,iEAAiE;AACjE,MAAM,UAAU,eAAe,CAAC,GAAkB;IACjD,OAAO,mBAAmB,CAAC,GAAG,CAAsB,CAAC;AACtD,CAAC;AAED;;;;;;;;;;;;;;;;;;;;;;;;;GAyBG;AACH,MAAM,CAAC,MAAM,qBAAqB,GAAG;IACpC,GAAG,EAAE,CAAC,mBAAmB,EAAE,aAAa,CAAC;IACzC,IAAI,EAAE,CAAC,gBAAgB,EAAE,kBAAkB,CAAC;IAC5C,MAAM,EAAE,CAAC,gBAAgB,EAAE,kBAAkB,CAAC;IAC9C,KAAK,EAAE,CAAC,mBAAmB,EAAE,qBAAqB,CAAC;IACnD,KAAK,EAAE,CAAC,mBAAmB,EAAE,qBAAqB,EAAE,gBAAgB,CAAC;IACrE,GAAG,EAAE,CAAC,mBAAmB,EAAE,qBAAqB,CAAC;IACjD,KAAK,EAAE,CAAC,cAAc,EAAE,iBAAiB,CAAC;IAC1C,SAAS,EAAE,CAAC,OAAO,CAAC;IACpB,aAAa,EAAE,CAAC,YAAY,EAAE,qBAAqB,CAAC;CACQ,CAAC;AAE9D,mFAAmF;AACnF,MAAM,UAAU,mBAAmB,CAAC,GAAkB;IACrD,OAAO,qBAAqB,CAAC,GAAG,CAAsB,CAAC;AACxD,CAAC;AAED,sFAAsF;AACtF,yFAAyF;AACzF,qCAAqC;AACrC,KAAK,MAAM,GAAG,IAAI,MAAM,CAAC,IAAI,CAAC,mBAAmB,CAA6B,EAAE,CAAC;IAChF,MAAM,OAAO,GAAG,IAAI,GAAG,CAAS,eAAe,CAAC,GAAG,CAAC,CAAC,CAAC;IACtD,KAAK,MAAM,IAAI,IAAI,mBAAmB,CAAC,GAAG,CAAC,EAAE,CAAC;QAC7C,IAAI,CAAC,OAAO,CAAC,GAAG,CAAC,IAAI,CAAC,EAAE,CAAC;YACxB,MAAM,IAAI,KAAK,CACd,yBAAyB,GAAG,YAAY,IAAI,gCAAgC,GAAG,mBAAmB,CAClG,CAAC;QACH,CAAC;IACF,CAAC;AACF,CAAC"}
+{"version":3,"file":"schema.js","sourceRoot":"","sources":["../../src/registry-data/schema.ts"],"names":[],"mappings":"AAAA,wCAAwC;AACxC,GAAG;AACH,0FAA0F;AAC1F,4FAA4F;AAC5F,wFAAwF;AACxF,yFAAyF;AACzF,2EAA2E;AAC3E,GAAG;AACH,qFAAqF;AACrF,4FAA4F;AAC5F,sFAAsF;AACtF,0FAA0F;AAC1F,uFAAuF;AACvF,2EAA2E;AAC3E,0FAA0F;AAC1F,sFAAsF;AACtF,4BAA4B;AAC5B,6FAA6F;AAC7F,0FAA0F;AAC1F,6FAA6F;AAC7F,0FAA0F;AAC1F,uCAAuC;AACvC,4FAA4F;AAC5F,6FAA6F;AAC7F,4FAA4F;AAC5F,qFAAqF;AACrF,uFAAuF;AACvF,qFAAqF;AACrF,uFAAuF;AACvF,uFAAuF;AACvF,GAAG;AACH,4FAA4F;AAC5F,2FAA2F;AAC3F,2FAA2F;AAC3F,0FAA0F;AAC1F,cAAc;AAEd,yFAAyF;AACzF,MAAM,CAAC,MAAM,mBAAmB,GAAG;IAClC,GAAG,EAAE;QACJ,mBAAmB;QACnB,aAAa;QACb,aAAa;QACb,gBAAgB;QAChB,aAAa;KACb;IACD,IAAI,EAAE;QACL,gBAAgB;QAChB,kBAAkB;QAClB,yBAAyB;QACzB,mBAAmB;QACnB,uBAAuB;QACvB,gBAAgB;QAChB,gBAAgB;KAChB;IACD,MAAM,EAAE;QACP,gBAAgB;QAChB,kBAAkB;QAClB,yBAAyB;QACzB,mBAAmB;QACnB,uBAAuB;QACvB,gBAAgB;QAChB,gBAAgB;KAChB;IACD,KAAK,EAAE;QACN,mBAAmB;QACnB,qBAAqB;QACrB,gBAAgB;QAChB,gBAAgB;QAChB,kBAAkB;KAClB;IACD,KAAK,EAAE;QACN,mBAAmB;QACnB,qBAAqB;QACrB,gBAAgB;QAChB,gBAAgB;QAChB,kBAAkB;KAClB;IACD,GAAG,EAAE;QACJ,mBAAmB;QACnB,qBAAqB;QACrB,gBAAgB;QAChB,gBAAgB;QAChB,kBAAkB;KAClB;IACD,KAAK,EAAE;QACN,cAAc;QACd,iBAAiB;QACjB,0BAA0B;QAC1B,yBAAyB;KACzB;IACD,SAAS,EAAE,CAAC,OAAO,EAAE,YAAY,CAAC;IAClC,aAAa,EAAE,CAAC,YAAY,EAAE,qBAAqB,CAAC;IACpD,GAAG,EAAE,CAAC,wBAAwB,EAAE,yBAAyB,CAAC;CACjD,CAAC;AAKX,iEAAiE;AACjE,MAAM,UAAU,eAAe,CAAC,GAAkB;IACjD,OAAO,mBAAmB,CAAC,GAAG,CAAsB,CAAC;AACtD,CAAC;AAED;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA+BG;AACH,MAAM,CAAC,MAAM,qBAAqB,GAAG;IACpC,GAAG,EAAE,CAAC,mBAAmB,EAAE,aAAa,CAAC;IACzC,IAAI,EAAE,CAAC,gBAAgB,EAAE,kBAAkB,CAAC;IAC5C,MAAM,EAAE,CAAC,gBAAgB,EAAE,kBAAkB,CAAC;IAC9C,KAAK,EAAE,CAAC,mBAAmB,EAAE,qBAAqB,CAAC;IACnD,KAAK,EAAE,CAAC,mBAAmB,EAAE,qBAAqB,EAAE,gBAAgB,CAAC;IACrE,GAAG,EAAE,CAAC,mBAAmB,EAAE,qBAAqB,EAAE,gBAAgB,EAAE,kBAAkB,CAAC;IACvF,KAAK,EAAE,CAAC,cAAc,EAAE,iBAAiB,CAAC;IAC1C,SAAS,EAAE,CAAC,OAAO,CAAC;IACpB,aAAa,EAAE,CAAC,YAAY,EAAE,qBAAqB,CAAC;IACpD,GAAG,EAAE,CAAC,wBAAwB,EAAE,yBAAyB,CAAC;CACE,CAAC;AAE9D,mFAAmF;AACnF,MAAM,UAAU,mBAAmB,CAAC,GAAkB;IACrD,OAAO,qBAAqB,CAAC,GAAG,CAAsB,CAAC;AACxD,CAAC;AAED,sFAAsF;AACtF,yFAAyF;AACzF,qCAAqC;AACrC,KAAK,MAAM,GAAG,IAAI,MAAM,CAAC,IAAI,CAAC,mBAAmB,CAA6B,EAAE,CAAC;IAChF,MAAM,OAAO,GAAG,IAAI,GAAG,CAAS,eAAe,CAAC,GAAG,CAAC,CAAC,CAAC;IACtD,KAAK,MAAM,IAAI,IAAI,mBAAmB,CAAC,GAAG,CAAC,EAAE,CAAC;QAC7C,IAAI,CAAC,OAAO,CAAC,GAAG,CAAC,IAAI,CAAC,EAAE,CAAC;YACxB,MAAM,IAAI,KAAK,CACd,yBAAyB,GAAG,YAAY,IAAI,gCAAgC,GAAG,mBAAmB,CAClG,CAAC;QACH,CAAC;IACF,CAAC;AACF,CAAC"}

package/dist/registry-data/ujt.d.ts

@@ -0,0 +1,3 @@
+import { type PartDataEntry } from "./loader";
+export declare const ujtRegistryRecords: readonly PartDataEntry[];
+//# sourceMappingURL=ujt.d.ts.map

package/dist/registry-data/ujt.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ujt.d.ts","sourceRoot":"","sources":["../../src/registry-data/ujt.ts"],"names":[],"mappings":"AAoBA,OAAO,EAAkB,KAAK,aAAa,EAAE,MAAM,UAAU,CAAC;AAE9D,eAAO,MAAM,kBAAkB,EAAE,SAAS,aAAa,EA6BrD,CAAC"}

package/dist/registry-data/ujt.js

@@ -0,0 +1,48 @@
+// UJT registry data: intrinsic standoff ratio and interbase resistance by exact part id.
+//
+// The two numbers ARE the part model: eta sets the tap (RB1 = eta * Rbb, the peak-point
+// fraction) and Rbb sets the bar. Everything else about the law is structure, not data:
+// the emitter junction is a silicon diode by construction (the law's constants) and the
+// conductivity modulation is the lowering's VCCS factor. So a record states exactly these
+// two parameters, and `ujtLawEntry` (part-catalog.ts) throws on anything else shaped
+// like a UJT record that omits one.
+//
+// Derivation rule (standing): a printed range becomes one value by its arithmetic
+// midpoint (eta and Rbb are divider fractions and resistances, not gains, so the
+// geomean-for-gains rule does not apply). A printed TYP is transcribed with its row
+// quoted. One value per parameter, no min/typ/max.
+//
+// Pending: none. The 2N4871 entry below is seeded from the manufacturer datasheet
+// (Digitron Semiconductors 2N4870, 2N4871 UNIJUNCTION TRANSISTORS, Rev. 20120705,
+// sha256 81b46aa8ad8a271a3aca154f7129fe3e6abfc7066440d52d50a4d99ff9a17722).
+// 2N4870 is deliberately absent: nothing in the corpus uses it, and the registry
+// holds parts, not families.
+import { definePartData } from "./loader.js";
+export const ujtRegistryRecords = definePartData([
+    {
+        partIds: ["2N4871"],
+        class: "ujt",
+        params: {
+            intrinsicStandoffRatio: {
+                value: 0.775,
+                basis: "derived",
+                source: "Digitron Semiconductors 2N4870, 2N4871 UNIJUNCTION TRANSISTORS " +
+                    "(Rev. 20120705) p1, ELECTRICAL CHARACTERISTICS (TA = 25 C): " +
+                    "'Intrinsic standoff ratio eta (VB2B1 = 10V), 2N4871, MIN 0.70 MAX 0.85' " +
+                    "(no TYP printed; Note 1: VP = eta*VB2B1 + VF, VF about 0.49V at 25 C @ IF = 10uA)",
+                derivation: "Printed 2N4871 eta range 0.70-0.85 at VB2B1 = 10 V, no TYP printed; " +
+                    "arithmetic midpoint (form 2, printed range -- a divider fraction, not a gain, " +
+                    "so no geomean): (0.70 + 0.85) / 2 = 0.775.",
+            },
+            interbaseResistanceOhms: {
+                value: 6000,
+                basis: "datasheet",
+                source: "Digitron Semiconductors 2N4870, 2N4871 UNIJUNCTION TRANSISTORS " +
+                    "(Rev. 20120705) p1, ELECTRICAL CHARACTERISTICS (TA = 25 C): " +
+                    "'Interbase resistance RBB (VB2B1 = 3.0V, IE = 0), MIN 4.0 TYP 6.0 MAX 9.1 kohm' " +
+                    "(one row for both parts)",
+            },
+        },
+    },
+]);
+//# sourceMappingURL=ujt.js.map

package/dist/registry-data/ujt.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"ujt.js","sourceRoot":"","sources":["../../src/registry-data/ujt.ts"],"names":[],"mappings":"AAAA,yFAAyF;AACzF,EAAE;AACF,wFAAwF;AACxF,wFAAwF;AACxF,wFAAwF;AACxF,0FAA0F;AAC1F,qFAAqF;AACrF,oCAAoC;AACpC,EAAE;AACF,kFAAkF;AAClF,iFAAiF;AACjF,oFAAoF;AACpF,mDAAmD;AACnD,EAAE;AACF,kFAAkF;AAClF,kFAAkF;AAClF,4EAA4E;AAC5E,iFAAiF;AACjF,6BAA6B;AAE7B,OAAO,EAAE,cAAc,EAAsB,MAAM,UAAU,CAAC;AAE9D,MAAM,CAAC,MAAM,kBAAkB,GAA6B,cAAc,CAAC;IAC1E;QACC,OAAO,EAAE,CAAC,QAAQ,CAAC;QACnB,KAAK,EAAE,KAAK;QACZ,MAAM,EAAE;YACP,sBAAsB,EAAE;gBACvB,KAAK,EAAE,KAAK;gBACZ,KAAK,EAAE,SAAS;gBAChB,MAAM,EACL,iEAAiE;oBACjE,8DAA8D;oBAC9D,0EAA0E;oBAC1E,mFAAmF;gBACpF,UAAU,EACT,sEAAsE;oBACtE,gFAAgF;oBAChF,4CAA4C;aAC7C;YACD,uBAAuB,EAAE;gBACxB,KAAK,EAAE,IAAI;gBACX,KAAK,EAAE,WAAW;gBAClB,MAAM,EACL,iEAAiE;oBACjE,8DAA8D;oBAC9D,kFAAkF;oBAClF,0BAA0B;aAC3B;SACD;KACD;CACD,CAAC,CAAC"}