@vepler/sdk 3.0.0 → 5.28.1

package/dist/esm/sdk/models/operations/getepcbylocationid.js

@@ -6,7 +6,7 @@ import { remap as remap$ } from "../../../lib/primitives.js";
 import { safeParse } from "../../../lib/schemas.js";
 import * as openEnums from "../../types/enums.js";
 /**
- * Filter by certificate type. Omit to return all types.
+ * Return only certificates of this type. Omit to get every type.
  */
 export const CertificateType = {
     Domestic: "domestic",
@@ -14,7 +14,7 @@ export const CertificateType = {
     Dec: "dec",
 };
 /**
- * Assessment methodology: rdsap (existing domestic), sap (new domestic), sbem (non-domestic), dsm (complex non-domestic), operational (DEC).
+ * Which procedure the assessment followed. `rdsap` is the reduced-data procedure for existing dwellings and `sap` the full procedure for new ones; `sbem` covers non-domestic buildings and `dsm` the dynamic simulation modelling used for the most complex of them; `operational` is the metered assessment behind a Display Energy Certificate.
  */
 export const AssessmentMethodology = {
     Rdsap: "rdsap",
@@ -24,7 +24,7 @@ export const AssessmentMethodology = {
     Operational: "operational",
 };
 /**
- * Primary servicing strategy for CO2 emissions calculation.
+ * How the building is serviced for heating, ventilation and cooling, which sets the basis for its emissions calculation.
  */
 export const BuildingEnvironment = {
     HeatingAndNaturalVentilation: "heating_and_natural_ventilation",
@@ -35,7 +35,7 @@ export const BuildingEnvironment = {
     Unconditioned: "unconditioned",
 };
 /**
- * New build benchmark band. Scotland only.
+ * Band for the new build benchmark. Scotland only.
  */
 export const NewBuildBand = {
     APlus: "A+",
@@ -53,7 +53,7 @@ export const NewBuildBand = {
     G: "G",
 };
 /**
- * Certificate type: domestic, non_domestic, or dec.
+ * What kind of certificate this is. `domestic` and `non_domestic` are Energy Performance Certificates for dwellings and for other buildings; `dec` is a Display Energy Certificate, which rates a public building's measured energy use.
  */
 export const GetEpcByLocationIdCertificateType = {
     Domestic: "domestic",
@@ -61,7 +61,7 @@ export const GetEpcByLocationIdCertificateType = {
     Dec: "dec",
 };
 /**
- * Built form: detached, semi_detached, mid_terrace, end_terrace, enclosed_mid_terrace, enclosed_end_terrace.
+ * How the dwelling sits in relation to its neighbours.
  */
 export const BuiltForm = {
     Detached: "detached",
@@ -72,7 +72,7 @@ export const BuiltForm = {
     EnclosedEndTerrace: "enclosed_end_terrace",
 };
 /**
- * Glazed area relative to typical property. Deprecated in RdSAP10 but persists in register from older assessments.
+ * How much glazing the dwelling has compared with a typical property of its type. Only older assessments carry it, as the current assessment procedure no longer records it.
  */
 export const Area = {
     MuchLessThanTypical: "much_less_than_typical",
@@ -82,7 +82,7 @@ export const Area = {
     MuchMoreThanTypical: "much_more_than_typical",
 };
 /**
- * Glazing specification.
+ * What kind of glazing is fitted, with double glazing split by whether it was installed before 2002.
  */
 export const GetEpcByLocationIdType = {
     Single: "single",
@@ -95,7 +95,7 @@ export const GetEpcByLocationIdType = {
     NotDefined: "not_defined",
 };
 /**
- * Tenure type: owner_occupied, rented_social, rented_private, unknown.
+ * Whether the dwelling is owner occupied or rented, and if rented, socially or privately.
  */
 export const Tenure = {
     OwnerOccupied: "owner_occupied",
@@ -104,21 +104,21 @@ export const Tenure = {
     Unknown: "unknown",
 };
 /**
- * Unit of co2Current measurement. Domestic: tonnes_per_year. Non-domestic/DEC: kg_co2_per_m2_per_year.
+ * The unit `co2Current` is expressed in. Domestic certificates use `tonnes_per_year`; non-domestic certificates and Display Energy Certificates use `kg_co2_per_m2_per_year`.
  */
 export const Co2Unit = {
     TonnesPerYear: "tonnes_per_year",
     KgCo2PerM2PerYear: "kg_co2_per_m2_per_year",
 };
 /**
- * Unit of energyConsumptionCurrent measurement.
+ * The unit `energyConsumptionCurrent` is expressed in.
  */
 export const EnergyConsumptionUnit = {
     KwhPerYear: "kwh_per_year",
     KwhPerM2PerYear: "kwh_per_m2_per_year",
 };
 /**
- * Energy efficiency rating.
+ * How energy efficient this component is, on the certificate's five-point scale.
  */
 export const EnergyEfficiency = {
     VeryGood: "very_good",
@@ -128,7 +128,7 @@ export const EnergyEfficiency = {
     VeryPoor: "very_poor",
 };
 /**
- * Environmental efficiency rating.
+ * How this component scores for environmental impact, on the certificate's five-point scale.
  */
 export const EnvironmentalEfficiency = {
     VeryGood: "very_good",
@@ -138,7 +138,7 @@ export const EnvironmentalEfficiency = {
     VeryPoor: "very_poor",
 };
 /**
- * Non-null when source value was corrupted/incomplete.
+ * Set when the source value could not be read as recorded, giving the reason. Null when the value came through intact.
  */
 export const DataQuality = {
     TruncatedThermalTransmittance: "truncated_thermal_transmittance",
@@ -148,7 +148,7 @@ export const DataQuality = {
     SourceError: "source_error",
 };
 /**
- * Energy efficiency rating.
+ * How energy efficient the floor is, on the certificate's five-point scale.
  */
 export const GetEpcByLocationIdEnergyEfficiency = {
     VeryGood: "very_good",
@@ -158,7 +158,7 @@ export const GetEpcByLocationIdEnergyEfficiency = {
     VeryPoor: "very_poor",
 };
 /**
- * Environmental efficiency rating.
+ * How the floor scores for environmental impact, on the certificate's five-point scale.
  */
 export const GetEpcByLocationIdEnvironmentalEfficiency = {
     VeryGood: "very_good",
@@ -168,7 +168,7 @@ export const GetEpcByLocationIdEnvironmentalEfficiency = {
     VeryPoor: "very_poor",
 };
 /**
- * Floor type: solid, suspended_timber, suspended_sealed, another_dwelling_below, other_premises_below.
+ * How the ground floor is built, including the cases where another dwelling or premises sits below.
  */
 export const FloorType = {
     Solid: "solid",
@@ -178,7 +178,7 @@ export const FloorType = {
     OtherPremisesBelow: "other_premises_below",
 };
 /**
- * Insulation type if present.
+ * How the floor is insulated, where insulation is present.
  */
 export const InsulationType = {
     None: "none",
@@ -194,7 +194,7 @@ export const InsulationType = {
     Rafter: "rafter",
 };
 /**
- * Energy efficiency rating.
+ * How energy efficient this component is, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCEnergyEfficiency = {
     VeryGood: "very_good",
@@ -204,7 +204,7 @@ export const GetEPCByLocationIdEPCEnergyEfficiency = {
     VeryPoor: "very_poor",
 };
 /**
- * Environmental efficiency rating.
+ * How this component scores for environmental impact, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCEnvironmentalEfficiency = {
     VeryGood: "very_good",
@@ -214,7 +214,7 @@ export const GetEPCByLocationIdEPCEnvironmentalEfficiency = {
     VeryPoor: "very_poor",
 };
 /**
- * Energy efficiency rating.
+ * How energy efficient this component is, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponseEnergyEfficiency = {
     VeryGood: "very_good",
@@ -224,7 +224,7 @@ export const GetEPCByLocationIdEPCResponseEnergyEfficiency = {
     VeryPoor: "very_poor",
 };
 /**
- * Environmental efficiency rating.
+ * How this component scores for environmental impact, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponseEnvironmentalEfficiency = {
     VeryGood: "very_good",
@@ -234,7 +234,7 @@ export const GetEPCByLocationIdEPCResponseEnvironmentalEfficiency = {
     VeryPoor: "very_poor",
 };
 /**
- * Energy efficiency rating.
+ * How energy efficient this component is, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponse200EnergyEfficiency = {
     VeryGood: "very_good",
@@ -244,7 +244,7 @@ export const GetEPCByLocationIdEPCResponse200EnergyEfficiency = {
     VeryPoor: "very_poor",
 };
 /**
- * Environmental efficiency rating.
+ * How this component scores for environmental impact, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponse200EnvironmentalEfficiency = {
     VeryGood: "very_good",
@@ -254,7 +254,7 @@ export const GetEPCByLocationIdEPCResponse200EnvironmentalEfficiency = {
     VeryPoor: "very_poor",
 };
 /**
- * Non-null when source value was corrupted/incomplete.
+ * Set when the source value could not be read as recorded, giving the reason. Null when the value came through intact.
  */
 export const GetEpcByLocationIdDataQuality = {
     TruncatedThermalTransmittance: "truncated_thermal_transmittance",
@@ -264,7 +264,7 @@ export const GetEpcByLocationIdDataQuality = {
     SourceError: "source_error",
 };
 /**
- * Energy efficiency rating.
+ * How energy efficient the heating system is, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponse200ApplicationJSONEnergyEfficiency = {
     VeryGood: "very_good",
@@ -274,7 +274,7 @@ export const GetEPCByLocationIdEPCResponse200ApplicationJSONEnergyEfficiency = {
     VeryPoor: "very_poor",
 };
 /**
- * Environmental efficiency rating.
+ * How the heating system scores for environmental impact, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponse200ApplicationJSONEnvironmentalEfficiency = {
     VeryGood: "very_good",
@@ -284,7 +284,7 @@ export const GetEPCByLocationIdEPCResponse200ApplicationJSONEnvironmentalEfficie
     VeryPoor: "very_poor",
 };
 /**
- * Fuel type for this heating system.
+ * The fuel this heating system runs on.
  */
 export const Fuel = {
     MainsGas: "mains_gas",
@@ -303,7 +303,7 @@ export const Fuel = {
     Other: "other",
 };
 /**
- * Heat pump type if applicable: air_source, ground_source, water_source.
+ * Where the heat pump draws its heat from, where the system is a heat pump.
  */
 export const HeatPumpType = {
     AirSource: "air_source",
@@ -311,7 +311,7 @@ export const HeatPumpType = {
     WaterSource: "water_source",
 };
 /**
- * Heating system type: boiler_radiators, storage_heaters, heat_pump_radiators, etc.
+ * What kind of main heating system is installed.
  */
 export const SystemType = {
     BoilerRadiators: "boiler_radiators",
@@ -327,7 +327,7 @@ export const SystemType = {
     NoneAssumed: "none_assumed",
 };
 /**
- * Non-null when source value was corrupted/incomplete.
+ * Set when the source value could not be read as recorded, giving the reason. Null when the value came through intact.
  */
 export const GetEPCByLocationIdEPCDataQuality = {
     TruncatedThermalTransmittance: "truncated_thermal_transmittance",
@@ -337,7 +337,7 @@ export const GetEPCByLocationIdEPCDataQuality = {
     SourceError: "source_error",
 };
 /**
- * Energy efficiency rating.
+ * How energy efficient the roof is, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyEnergyEfficiency = {
     VeryGood: "very_good",
@@ -347,7 +347,7 @@ export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyEnergyEf
     VeryPoor: "very_poor",
 };
 /**
- * Environmental efficiency rating.
+ * How the roof scores for environmental impact, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyEnvironmentalEfficiency = {
     VeryGood: "very_good",
@@ -357,7 +357,7 @@ export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyEnvironm
     VeryPoor: "very_poor",
 };
 /**
- * Insulation type: loft, rafter, none, etc.
+ * How the roof is insulated, if at all.
  */
 export const GetEpcByLocationIdInsulationType = {
     None: "none",
@@ -373,7 +373,7 @@ export const GetEpcByLocationIdInsulationType = {
     Rafter: "rafter",
 };
 /**
- * Roof type: pitched, flat, thatched, another_dwelling_above, other_premises_above, roof_room.
+ * How the roof is built, including the cases where another dwelling or premises sits above.
  */
 export const RoofType = {
     Pitched: "pitched",
@@ -384,7 +384,7 @@ export const RoofType = {
     RoofRoom: "roof_room",
 };
 /**
- * Energy efficiency rating.
+ * How energy efficient this component is, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyDataEnergyEfficiency = {
     VeryGood: "very_good",
@@ -394,7 +394,7 @@ export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyDataEner
     VeryPoor: "very_poor",
 };
 /**
- * Environmental efficiency rating.
+ * How this component scores for environmental impact, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyDataEnvironmentalEfficiency = {
     VeryGood: "very_good",
@@ -404,7 +404,7 @@ export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyDataEnvi
     VeryPoor: "very_poor",
 };
 /**
- * Wall construction type: cavity, solid_brick, timber_frame, sandstone_or_limestone, etc.
+ * How the external walls are built.
  */
 export const Construction = {
     Cavity: "cavity",
@@ -422,7 +422,7 @@ export const Construction = {
     CurtainWall: "curtain_wall",
 };
 /**
- * Non-null when the source value was corrupted/incomplete. Null = normal quality.
+ * Set when the source value could not be read as recorded, giving the reason. Null when the value came through intact.
  */
 export const GetEPCByLocationIdEPCResponseDataQuality = {
     TruncatedThermalTransmittance: "truncated_thermal_transmittance",
@@ -432,7 +432,7 @@ export const GetEPCByLocationIdEPCResponseDataQuality = {
     SourceError: "source_error",
 };
 /**
- * Energy efficiency rating.
+ * How energy efficient the walls are, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyDataFabricEnergyEfficiency = {
     VeryGood: "very_good",
@@ -442,7 +442,7 @@ export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyDataFabr
     VeryPoor: "very_poor",
 };
 /**
- * Environmental efficiency rating.
+ * How the walls score for environmental impact, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyDataFabricEnvironmentalEfficiency = {
     VeryGood: "very_good",
@@ -452,7 +452,7 @@ export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyDataFabr
     VeryPoor: "very_poor",
 };
 /**
- * Insulation type: none, filled_cavity, external, internal, as_built, partial, etc.
+ * How the walls are insulated, if at all.
  */
 export const GetEPCByLocationIdEPCInsulationType = {
     None: "none",
@@ -468,7 +468,7 @@ export const GetEPCByLocationIdEPCInsulationType = {
     Rafter: "rafter",
 };
 /**
- * Energy efficiency rating.
+ * How energy efficient this component is, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyDataFabricWindowsEnergyEfficiency = {
     VeryGood: "very_good",
@@ -478,7 +478,7 @@ export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyDataFabr
     VeryPoor: "very_poor",
 };
 /**
- * Environmental efficiency rating.
+ * How this component scores for environmental impact, on the certificate's five-point scale.
  */
 export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyDataFabricWindowsEnvironmentalEfficiency = {
     VeryGood: "very_good",
@@ -488,12 +488,13 @@ export const GetEPCByLocationIdEPCResponse200ApplicationJSONResponseBodyDataFabr
     VeryPoor: "very_poor",
 };
 /**
- * Derived MEES compliance status (Decision D11). Based on current energy rating band and certificate type. compliant=A-E, at_risk=E, non_compliant=F-G, exempt=non-domestic/DEC.
+ * Whether the building meets the Minimum Energy Efficiency Standard, worked out from the current rating band, the certificate type and the nation. `compliant` covers bands A to D, `non_compliant` bands F and G, and `at_risk` marks band E as lettable today with no headroom under the expected tightening to C. The standard is SI 2015/962, which covers both domestic and non-domestic private rented property in England and Wales but does not extend to Scotland, and which is assessed on an asset rating rather than the operational rating a Display Energy Certificate carries — so Scottish certificates and DECs are `not_applicable`. `exempt` means a registered PRS exemption and appears only on legacy rows; it is never derived from certificate data. `unknown` means there is not enough data to decide.
  */
 export const MeesCompliance = {
     Compliant: "compliant",
     AtRisk: "at_risk",
     NonCompliant: "non_compliant",
+    NotApplicable: "not_applicable",
     Exempt: "exempt",
     Unknown: "unknown",
 };
@@ -529,7 +530,7 @@ export const BuildingCategory = {
     W5: "W5",
 };
 /**
- * Operational rating band (A-G, no A+).
+ * Band for the operational rating. Display Energy Certificates run A to G, with no A+.
  */
 export const RatingBand = {
     APlus: "A+",
@@ -547,7 +548,7 @@ export const RatingBand = {
     G: "G",
 };
 /**
- * Energy efficiency band. A/A+ is most efficient, G is least. Domestic uses A-G. Non-domestic uses A+-G. Scotland non-domestic also has half-bands (B+, C+, etc.).
+ * Energy efficiency band, where A+ and A are the most efficient and G the least. Domestic certificates use A to G, non-domestic certificates add A+, and Scotland non-domestic certificates also use half-bands such as B+ and C+.
  */
 export const Band = {
     APlus: "A+",
@@ -565,7 +566,7 @@ export const Band = {
     G: "G",
 };
 /**
- * Discriminator for numeric score interpretation.
+ * Which scale `score` is on. Read it before comparing scores across certificates.
  */
 export const ScoreType = {
     Sap: "sap",
@@ -574,7 +575,7 @@ export const ScoreType = {
     Epi: "epi",
 };
 /**
- * Energy efficiency band. A/A+ is most efficient, G is least. Domestic uses A-G. Non-domestic uses A+-G. Scotland non-domestic also has half-bands (B+, C+, etc.).
+ * Energy efficiency band, where A+ and A are the most efficient and G the least. Domestic certificates use A to G, non-domestic certificates add A+, and Scotland non-domestic certificates also use half-bands such as B+ and C+.
  */
 export const GetEpcByLocationIdBand = {
     APlus: "A+",
@@ -592,7 +593,7 @@ export const GetEpcByLocationIdBand = {
     G: "G",
 };
 /**
- * Discriminator for numeric score interpretation.
+ * Which scale `score` is on. Read it before comparing scores across certificates.
  */
 export const GetEpcByLocationIdScoreType = {
     Sap: "sap",
@@ -601,7 +602,7 @@ export const GetEpcByLocationIdScoreType = {
     Epi: "epi",
 };
 /**
- * Measure category: insulation, glazing, heating, hot_water, renewables, lighting.
+ * What kind of improvement the measure is.
  */
 export const GetEpcByLocationIdCategory = {
     Insulation: "insulation",
@@ -612,7 +613,7 @@ export const GetEpcByLocationIdCategory = {
     Lighting: "lighting",
 };
 /**
- * CO2 reduction impact. Scotland non-domestic only: low, medium, high.
+ * How much the measure cuts carbon dioxide emissions. Scotland non-domestic only.
  */
 export const Co2Impact = {
     Low: "low",
@@ -620,13 +621,13 @@ export const Co2Impact = {
     High: "high",
 };
 /**
- * Currency. All values normalised to GBP.
+ * The currency of the cost figures. Always `GBP`.
  */
 export const Currency = {
     Gbp: "GBP",
 };
 /**
- * Canonical improvement measure: wall_insulation, condensing_boiler, solar_pv, etc. 40 canonical values covering all SAP standard improvement measures.
+ * Which improvement is recommended, mapped to a standard set of measures.
  */
 export const Measure = {
     WallInsulation: "wall_insulation",
@@ -671,7 +672,7 @@ export const Measure = {
     LowEnergyLighting: "low_energy_lighting",
 };
 /**
- * Payback period classification. Non-domestic only: short, medium, long, other.
+ * How long the measure takes to pay for itself. Non-domestic only.
  */
 export const PaybackType = {
     Short: "short",
@@ -680,13 +681,13 @@ export const PaybackType = {
     Other: "other",
 };
 /**
- * Currency.
+ * The currency of the saving. Always `GBP`.
  */
 export const GetEpcByLocationIdCurrency = {
     Gbp: "GBP",
 };
 /**
- * Current band including Scotland half-bands (B+, C+, etc.) and 'Carbon Neu' → A+.
+ * Band for that rating. Scotland uses half-bands such as B+ and C+, and a carbon neutral building is published here as `A+`.
  */
 export const CurrentBand = {
     APlus: "A+",
@@ -704,7 +705,7 @@ export const CurrentBand = {
     G: "G",
 };
 /**
- * Potential band.
+ * Band for the achievable rating.
  */
 export const PotentialBand = {
     APlus: "A+",
@@ -722,14 +723,14 @@ export const PotentialBand = {
     G: "G",
 };
 /**
- * Source register: mhclg (England & Wales) or scottish_government (Scotland).
+ * Which national register the certificate came from: `mhclg` for England and Wales, `scottish_government` for Scotland.
  */
 export const Source = {
     Mhclg: "mhclg",
     ScottishGovernment: "scottish_government",
 };
 /**
- * AC inspection commissioning status.
+ * Whether an air conditioning inspection has been carried out, commissioned, or is not relevant.
  */
 export const InspectionStatus = {
     Completed: "completed",
@@ -739,7 +740,7 @@ export const InspectionStatus = {
     Unknown: "unknown",
 };
 /**
- * Electricity tariff type. Domestic only.
+ * The electricity tariff the property is on, including the off-peak arrangements. Domestic only.
  */
 export const EnergyTariff = {
     Single: "single",
@@ -751,7 +752,7 @@ export const EnergyTariff = {
     Unknown: "unknown",
 };
 /**
- * Corridor heat loss classification. Flats/maisonettes only.
+ * Whether the dwelling is reached by a corridor and whether that corridor is heated. Recorded for flats and maisonettes only.
  */
 export const HeatLossCorridor = {
     NoCorridor: "no_corridor",
@@ -759,7 +760,7 @@ export const HeatLossCorridor = {
     UnheatedCorridor: "unheated_corridor",
 };
 /**
- * Normalised primary fuel type. See mainFuelExternal for raw source text.
+ * The main fuel the building uses, mapped to a standard set of categories. `mainFuelExternal` carries the wording used on the certificate.
  */
 export const MainFuel = {
     MainsGas: "mains_gas",
@@ -778,7 +779,7 @@ export const MainFuel = {
     Other: "other",
 };
 /**
- * Mechanical ventilation type. Domestic only. Null means natural ventilation.
+ * How the property is ventilated. Domestic only.
  */
 export const Ventilation = {
     Natural: "natural",
@@ -786,7 +787,7 @@ export const Ventilation = {
     MechanicalSupplyAndExtract: "mechanical_supply_and_extract",
 };
 /**
- * Normalised transaction type (trigger for assessment).
+ * What prompted the assessment, mapped to a standard set of categories.
  */
 export const TransactionType = {
     MarketedSale: "marketed_sale",
@@ -801,6 +802,9 @@ export const TransactionType = {
     Construction: "construction",
     Other: "other",
 };
+/**
+ * Type of this response. Always `list`.
+ */
 export const GetEpcByLocationIdObject = {
     List: "list",
 };