@venusprotocol/venus-protocol 9.3.0-dev.3 → 9.3.0-dev.4

package/deployments/{xlayertestnet/solcInputs/61db31590278030f2b5f03e8109c4f65.json → opmainnet/solcInputs/7584667b44eb77970ba8d274006d81ae.json}

@@ -2,25 +2,25 @@
   "language": "Solidity",
   "sources": {
     "@openzeppelin/contracts-upgradeable/access/Ownable2StepUpgradeable.sol": {
-      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable2Step.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./OwnableUpgradeable.sol\";\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership} and {acceptOwnership}.\n *\n * This module is used through inheritance. It will make available all functions\n * from parent (Ownable).\n */\nabstract contract Ownable2StepUpgradeable is Initializable, OwnableUpgradeable {\n    function __Ownable2Step_init() internal onlyInitializing {\n        __Ownable_init_unchained();\n    }\n\n    function __Ownable2Step_init_unchained() internal onlyInitializing {\n    }\n    address private _pendingOwner;\n\n    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Returns the address of the pending owner.\n     */\n    function pendingOwner() public view virtual returns (address) {\n        return _pendingOwner;\n    }\n\n    /**\n     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual override onlyOwner {\n        _pendingOwner = newOwner;\n        emit OwnershipTransferStarted(owner(), newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual override {\n        delete _pendingOwner;\n        super._transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev The new owner accepts the ownership transfer.\n     */\n    function acceptOwnership() public virtual {\n        address sender = _msgSender();\n        require(pendingOwner() == sender, \"Ownable2Step: caller is not the new owner\");\n        _transferOwnership(sender);\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable2Step.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./OwnableUpgradeable.sol\";\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership} and {acceptOwnership}.\n *\n * This module is used through inheritance. It will make available all functions\n * from parent (Ownable).\n */\nabstract contract Ownable2StepUpgradeable is Initializable, OwnableUpgradeable {\n    address private _pendingOwner;\n\n    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);\n\n    function __Ownable2Step_init() internal onlyInitializing {\n        __Ownable_init_unchained();\n    }\n\n    function __Ownable2Step_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev Returns the address of the pending owner.\n     */\n    function pendingOwner() public view virtual returns (address) {\n        return _pendingOwner;\n    }\n\n    /**\n     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual override onlyOwner {\n        _pendingOwner = newOwner;\n        emit OwnershipTransferStarted(owner(), newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual override {\n        delete _pendingOwner;\n        super._transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev The new owner accepts the ownership transfer.\n     */\n    function acceptOwnership() public virtual {\n        address sender = _msgSender();\n        require(pendingOwner() == sender, \"Ownable2Step: caller is not the new owner\");\n        _transferOwnership(sender);\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"
     },
     "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol": {
-      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/ContextUpgradeable.sol\";\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {\n    address private _owner;\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the deployer as the initial owner.\n     */\n    function __Ownable_init() internal onlyInitializing {\n        __Ownable_init_unchained();\n    }\n\n    function __Ownable_init_unchained() internal onlyInitializing {\n        _transferOwnership(_msgSender());\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/ContextUpgradeable.sol\";\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {\n    address private _owner;\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the deployer as the initial owner.\n     */\n    function __Ownable_init() internal onlyInitializing {\n        __Ownable_init_unchained();\n    }\n\n    function __Ownable_init_unchained() internal onlyInitializing {\n        _transferOwnership(_msgSender());\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"
     },
     "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol": {
       "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../../utils/AddressUpgradeable.sol\";\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```solidity\n * contract MyToken is ERC20Upgradeable {\n *     function initialize() initializer public {\n *         __ERC20_init(\"MyToken\", \"MTK\");\n *     }\n * }\n *\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n *     function initializeV2() reinitializer(2) public {\n *         __ERC20Permit_init(\"MyToken\");\n *     }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n *     _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n    /**\n     * @dev Indicates that the contract has been initialized.\n     * @custom:oz-retyped-from bool\n     */\n    uint8 private _initialized;\n\n    /**\n     * @dev Indicates that the contract is in the process of being initialized.\n     */\n    bool private _initializing;\n\n    /**\n     * @dev Triggered when the contract has been initialized or reinitialized.\n     */\n    event Initialized(uint8 version);\n\n    /**\n     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n     * `onlyInitializing` functions can be used to initialize parent contracts.\n     *\n     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a\n     * constructor.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier initializer() {\n        bool isTopLevelCall = !_initializing;\n        require(\n            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),\n            \"Initializable: contract is already initialized\"\n        );\n        _initialized = 1;\n        if (isTopLevelCall) {\n            _initializing = true;\n        }\n        _;\n        if (isTopLevelCall) {\n            _initializing = false;\n            emit Initialized(1);\n        }\n    }\n\n    /**\n     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n     * used to initialize parent contracts.\n     *\n     * A reinitializer may be used after the original initialization step. This is essential to configure modules that\n     * are added through upgrades and that require initialization.\n     *\n     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`\n     * cannot be nested. If one is invoked in the context of another, execution will revert.\n     *\n     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n     * a contract, executing them in the right order is up to the developer or operator.\n     *\n     * WARNING: setting the version to 255 will prevent any future reinitialization.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier reinitializer(uint8 version) {\n        require(!_initializing && _initialized < version, \"Initializable: contract is already initialized\");\n        _initialized = version;\n        _initializing = true;\n        _;\n        _initializing = false;\n        emit Initialized(version);\n    }\n\n    /**\n     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n     * {initializer} and {reinitializer} modifiers, directly or indirectly.\n     */\n    modifier onlyInitializing() {\n        require(_initializing, \"Initializable: contract is not initializing\");\n        _;\n    }\n\n    /**\n     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n     * through proxies.\n     *\n     * Emits an {Initialized} event the first time it is successfully executed.\n     */\n    function _disableInitializers() internal virtual {\n        require(!_initializing, \"Initializable: contract is initializing\");\n        if (_initialized != type(uint8).max) {\n            _initialized = type(uint8).max;\n            emit Initialized(type(uint8).max);\n        }\n    }\n\n    /**\n     * @dev Returns the highest version that has been initialized. See {reinitializer}.\n     */\n    function _getInitializedVersion() internal view returns (uint8) {\n        return _initialized;\n    }\n\n    /**\n     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.\n     */\n    function _isInitializing() internal view returns (bool) {\n        return _initializing;\n    }\n}\n"
     },
     "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol": {
-      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/ContextUpgradeable.sol\";\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which allows children to implement an emergency stop\n * mechanism that can be triggered by an authorized account.\n *\n * This module is used through inheritance. It will make available the\n * modifiers `whenNotPaused` and `whenPaused`, which can be applied to\n * the functions of your contract. Note that they will not be pausable by\n * simply including this module, only once the modifiers are put in place.\n */\nabstract contract PausableUpgradeable is Initializable, ContextUpgradeable {\n    /**\n     * @dev Emitted when the pause is triggered by `account`.\n     */\n    event Paused(address account);\n\n    /**\n     * @dev Emitted when the pause is lifted by `account`.\n     */\n    event Unpaused(address account);\n\n    bool private _paused;\n\n    /**\n     * @dev Initializes the contract in unpaused state.\n     */\n    function __Pausable_init() internal onlyInitializing {\n        __Pausable_init_unchained();\n    }\n\n    function __Pausable_init_unchained() internal onlyInitializing {\n        _paused = false;\n    }\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is not paused.\n     *\n     * Requirements:\n     *\n     * - The contract must not be paused.\n     */\n    modifier whenNotPaused() {\n        _requireNotPaused();\n        _;\n    }\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is paused.\n     *\n     * Requirements:\n     *\n     * - The contract must be paused.\n     */\n    modifier whenPaused() {\n        _requirePaused();\n        _;\n    }\n\n    /**\n     * @dev Returns true if the contract is paused, and false otherwise.\n     */\n    function paused() public view virtual returns (bool) {\n        return _paused;\n    }\n\n    /**\n     * @dev Throws if the contract is paused.\n     */\n    function _requireNotPaused() internal view virtual {\n        require(!paused(), \"Pausable: paused\");\n    }\n\n    /**\n     * @dev Throws if the contract is not paused.\n     */\n    function _requirePaused() internal view virtual {\n        require(paused(), \"Pausable: not paused\");\n    }\n\n    /**\n     * @dev Triggers stopped state.\n     *\n     * Requirements:\n     *\n     * - The contract must not be paused.\n     */\n    function _pause() internal virtual whenNotPaused {\n        _paused = true;\n        emit Paused(_msgSender());\n    }\n\n    /**\n     * @dev Returns to normal state.\n     *\n     * Requirements:\n     *\n     * - The contract must be paused.\n     */\n    function _unpause() internal virtual whenPaused {\n        _paused = false;\n        emit Unpaused(_msgSender());\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/ContextUpgradeable.sol\";\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which allows children to implement an emergency stop\n * mechanism that can be triggered by an authorized account.\n *\n * This module is used through inheritance. It will make available the\n * modifiers `whenNotPaused` and `whenPaused`, which can be applied to\n * the functions of your contract. Note that they will not be pausable by\n * simply including this module, only once the modifiers are put in place.\n */\nabstract contract PausableUpgradeable is Initializable, ContextUpgradeable {\n    /**\n     * @dev Emitted when the pause is triggered by `account`.\n     */\n    event Paused(address account);\n\n    /**\n     * @dev Emitted when the pause is lifted by `account`.\n     */\n    event Unpaused(address account);\n\n    bool private _paused;\n\n    /**\n     * @dev Initializes the contract in unpaused state.\n     */\n    function __Pausable_init() internal onlyInitializing {\n        __Pausable_init_unchained();\n    }\n\n    function __Pausable_init_unchained() internal onlyInitializing {\n        _paused = false;\n    }\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is not paused.\n     *\n     * Requirements:\n     *\n     * - The contract must not be paused.\n     */\n    modifier whenNotPaused() {\n        _requireNotPaused();\n        _;\n    }\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is paused.\n     *\n     * Requirements:\n     *\n     * - The contract must be paused.\n     */\n    modifier whenPaused() {\n        _requirePaused();\n        _;\n    }\n\n    /**\n     * @dev Returns true if the contract is paused, and false otherwise.\n     */\n    function paused() public view virtual returns (bool) {\n        return _paused;\n    }\n\n    /**\n     * @dev Throws if the contract is paused.\n     */\n    function _requireNotPaused() internal view virtual {\n        require(!paused(), \"Pausable: paused\");\n    }\n\n    /**\n     * @dev Throws if the contract is not paused.\n     */\n    function _requirePaused() internal view virtual {\n        require(paused(), \"Pausable: not paused\");\n    }\n\n    /**\n     * @dev Triggers stopped state.\n     *\n     * Requirements:\n     *\n     * - The contract must not be paused.\n     */\n    function _pause() internal virtual whenNotPaused {\n        _paused = true;\n        emit Paused(_msgSender());\n    }\n\n    /**\n     * @dev Returns to normal state.\n     *\n     * Requirements:\n     *\n     * - The contract must be paused.\n     */\n    function _unpause() internal virtual whenPaused {\n        _paused = false;\n        emit Unpaused(_msgSender());\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"
     },
     "@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol": {
-      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)\n\npragma solidity ^0.8.0;\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n */\nabstract contract ReentrancyGuardUpgradeable is Initializable {\n    // Booleans are more expensive than uint256 or any type that takes up a full\n    // word because each write operation emits an extra SLOAD to first read the\n    // slot's contents, replace the bits taken up by the boolean, and then write\n    // back. This is the compiler's defense against contract upgrades and\n    // pointer aliasing, and it cannot be disabled.\n\n    // The values being non-zero value makes deployment a bit more expensive,\n    // but in exchange the refund on every call to nonReentrant will be lower in\n    // amount. Since refunds are capped to a percentage of the total\n    // transaction's gas, it is best to keep them low in cases like this one, to\n    // increase the likelihood of the full refund coming into effect.\n    uint256 private constant _NOT_ENTERED = 1;\n    uint256 private constant _ENTERED = 2;\n\n    uint256 private _status;\n\n    function __ReentrancyGuard_init() internal onlyInitializing {\n        __ReentrancyGuard_init_unchained();\n    }\n\n    function __ReentrancyGuard_init_unchained() internal onlyInitializing {\n        _status = _NOT_ENTERED;\n    }\n\n    /**\n     * @dev Prevents a contract from calling itself, directly or indirectly.\n     * Calling a `nonReentrant` function from another `nonReentrant`\n     * function is not supported. It is possible to prevent this from happening\n     * by making the `nonReentrant` function external, and making it call a\n     * `private` function that does the actual work.\n     */\n    modifier nonReentrant() {\n        _nonReentrantBefore();\n        _;\n        _nonReentrantAfter();\n    }\n\n    function _nonReentrantBefore() private {\n        // On the first call to nonReentrant, _status will be _NOT_ENTERED\n        require(_status != _ENTERED, \"ReentrancyGuard: reentrant call\");\n\n        // Any calls to nonReentrant after this point will fail\n        _status = _ENTERED;\n    }\n\n    function _nonReentrantAfter() private {\n        // By storing the original value once again, a refund is triggered (see\n        // https://eips.ethereum.org/EIPS/eip-2200)\n        _status = _NOT_ENTERED;\n    }\n\n    /**\n     * @dev Returns true if the reentrancy guard is currently set to \"entered\", which indicates there is a\n     * `nonReentrant` function in the call stack.\n     */\n    function _reentrancyGuardEntered() internal view returns (bool) {\n        return _status == _ENTERED;\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)\n\npragma solidity ^0.8.0;\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n */\nabstract contract ReentrancyGuardUpgradeable is Initializable {\n    // Booleans are more expensive than uint256 or any type that takes up a full\n    // word because each write operation emits an extra SLOAD to first read the\n    // slot's contents, replace the bits taken up by the boolean, and then write\n    // back. This is the compiler's defense against contract upgrades and\n    // pointer aliasing, and it cannot be disabled.\n\n    // The values being non-zero value makes deployment a bit more expensive,\n    // but in exchange the refund on every call to nonReentrant will be lower in\n    // amount. Since refunds are capped to a percentage of the total\n    // transaction's gas, it is best to keep them low in cases like this one, to\n    // increase the likelihood of the full refund coming into effect.\n    uint256 private constant _NOT_ENTERED = 1;\n    uint256 private constant _ENTERED = 2;\n\n    uint256 private _status;\n\n    function __ReentrancyGuard_init() internal onlyInitializing {\n        __ReentrancyGuard_init_unchained();\n    }\n\n    function __ReentrancyGuard_init_unchained() internal onlyInitializing {\n        _status = _NOT_ENTERED;\n    }\n\n    /**\n     * @dev Prevents a contract from calling itself, directly or indirectly.\n     * Calling a `nonReentrant` function from another `nonReentrant`\n     * function is not supported. It is possible to prevent this from happening\n     * by making the `nonReentrant` function external, and making it call a\n     * `private` function that does the actual work.\n     */\n    modifier nonReentrant() {\n        _nonReentrantBefore();\n        _;\n        _nonReentrantAfter();\n    }\n\n    function _nonReentrantBefore() private {\n        // On the first call to nonReentrant, _status will be _NOT_ENTERED\n        require(_status != _ENTERED, \"ReentrancyGuard: reentrant call\");\n\n        // Any calls to nonReentrant after this point will fail\n        _status = _ENTERED;\n    }\n\n    function _nonReentrantAfter() private {\n        // By storing the original value once again, a refund is triggered (see\n        // https://eips.ethereum.org/EIPS/eip-2200)\n        _status = _NOT_ENTERED;\n    }\n\n    /**\n     * @dev Returns true if the reentrancy guard is currently set to \"entered\", which indicates there is a\n     * `nonReentrant` function in the call stack.\n     */\n    function _reentrancyGuardEntered() internal view returns (bool) {\n        return _status == _ENTERED;\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"
     },
     "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/IERC20MetadataUpgradeable.sol": {
       "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20Upgradeable.sol\";\n\n/**\n * @dev Interface for the optional metadata functions from the ERC20 standard.\n *\n * _Available since v4.1._\n */\ninterface IERC20MetadataUpgradeable is IERC20Upgradeable {\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the symbol of the token.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the decimals places of the token.\n     */\n    function decimals() external view returns (uint8);\n}\n"
     },
     "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/IERC20PermitUpgradeable.sol": {
-      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n */\ninterface IERC20PermitUpgradeable {\n    /**\n     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n     * given ``owner``'s signed approval.\n     *\n     * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n     * ordering also apply here.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `deadline` must be a timestamp in the future.\n     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n     * over the EIP712-formatted function arguments.\n     * - the signature must use ``owner``'s current nonce (see {nonces}).\n     *\n     * For more information on the signature format, see the\n     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n     * section].\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external;\n\n    /**\n     * @dev Returns the current nonce for `owner`. This value must be\n     * included whenever a signature is generated for {permit}.\n     *\n     * Every successful call to {permit} increases ``owner``'s nonce by one. This\n     * prevents a signature from being used multiple times.\n     */\n    function nonces(address owner) external view returns (uint256);\n\n    /**\n     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n *\n * ==== Security Considerations\n *\n * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature\n * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be\n * considered as an intention to spend the allowance in any specific way. The second is that because permits have\n * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should\n * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be\n * generally recommended is:\n *\n * ```solidity\n * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {\n *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}\n *     doThing(..., value);\n * }\n *\n * function doThing(..., uint256 value) public {\n *     token.safeTransferFrom(msg.sender, address(this), value);\n *     ...\n * }\n * ```\n *\n * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of\n * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also\n * {SafeERC20-safeTransferFrom}).\n *\n * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so\n * contracts should have entry points that don't rely on permit.\n */\ninterface IERC20PermitUpgradeable {\n    /**\n     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n     * given ``owner``'s signed approval.\n     *\n     * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n     * ordering also apply here.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `deadline` must be a timestamp in the future.\n     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n     * over the EIP712-formatted function arguments.\n     * - the signature must use ``owner``'s current nonce (see {nonces}).\n     *\n     * For more information on the signature format, see the\n     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n     * section].\n     *\n     * CAUTION: See Security Considerations above.\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external;\n\n    /**\n     * @dev Returns the current nonce for `owner`. This value must be\n     * included whenever a signature is generated for {permit}.\n     *\n     * Every successful call to {permit} increases ``owner``'s nonce by one. This\n     * prevents a signature from being used multiple times.\n     */\n    function nonces(address owner) external view returns (uint256);\n\n    /**\n     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"
     },
     "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol": {
       "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20Upgradeable {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the amount of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the amount of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves `amount` tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Moves `amount` tokens from `from` to `to` using the\n     * allowance mechanism. `amount` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 amount) external returns (bool);\n}\n"
@@ -32,7 +32,7 @@
       "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary AddressUpgradeable {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     *\n     * Furthermore, `isContract` will also return true if the target contract within\n     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,\n     * which only has an effect at the end of a transaction.\n     * ====\n     *\n     * [IMPORTANT]\n     * ====\n     * You shouldn't rely on `isContract` to protect against flash loan attacks!\n     *\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n     * constructor.\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize/address.code.length, which returns 0\n        // for contracts in construction, since the code is only stored at the end\n        // of the constructor execution.\n\n        return account.code.length > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(address(this).balance >= value, \"Address: insufficient balance for call\");\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling\n     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.\n     *\n     * _Available since v4.8._\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        if (success) {\n            if (returndata.length == 0) {\n                // only check isContract if the call was successful and the return data is empty\n                // otherwise we already know that it was a contract\n                require(isContract(target), \"Address: call to non-contract\");\n            }\n            return returndata;\n        } else {\n            _revert(returndata, errorMessage);\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the\n     * revert reason or using the provided one.\n     *\n     * _Available since v4.3._\n     */\n    function verifyCallResult(\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal pure returns (bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            _revert(returndata, errorMessage);\n        }\n    }\n\n    function _revert(bytes memory returndata, string memory errorMessage) private pure {\n        // Look for revert reason and bubble it up if present\n        if (returndata.length > 0) {\n            // The easiest way to bubble the revert reason is using memory via assembly\n            /// @solidity memory-safe-assembly\n            assembly {\n                let returndata_size := mload(returndata)\n                revert(add(32, returndata), returndata_size)\n            }\n        } else {\n            revert(errorMessage);\n        }\n    }\n}\n"
     },
     "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol": {
-      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n    function __Context_init() internal onlyInitializing {\n    }\n\n    function __Context_init_unchained() internal onlyInitializing {\n    }\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[50] private __gap;\n}\n"
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)\n\npragma solidity ^0.8.0;\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n    function __Context_init() internal onlyInitializing {\n    }\n\n    function __Context_init_unchained() internal onlyInitializing {\n    }\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[50] private __gap;\n}\n"
     },
     "@openzeppelin/contracts-upgradeable/utils/math/SafeCastUpgradeable.sol": {
       "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)\n// This file was procedurally generated from scripts/generate/templates/SafeCast.js.\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n *\n * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing\n * all math on `uint256` and `int256` and then downcasting.\n */\nlibrary SafeCastUpgradeable {\n    /**\n     * @dev Returns the downcasted uint248 from uint256, reverting on\n     * overflow (when the input is greater than largest uint248).\n     *\n     * Counterpart to Solidity's `uint248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint248(uint256 value) internal pure returns (uint248) {\n        require(value <= type(uint248).max, \"SafeCast: value doesn't fit in 248 bits\");\n        return uint248(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint240 from uint256, reverting on\n     * overflow (when the input is greater than largest uint240).\n     *\n     * Counterpart to Solidity's `uint240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint240(uint256 value) internal pure returns (uint240) {\n        require(value <= type(uint240).max, \"SafeCast: value doesn't fit in 240 bits\");\n        return uint240(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint232 from uint256, reverting on\n     * overflow (when the input is greater than largest uint232).\n     *\n     * Counterpart to Solidity's `uint232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint232(uint256 value) internal pure returns (uint232) {\n        require(value <= type(uint232).max, \"SafeCast: value doesn't fit in 232 bits\");\n        return uint232(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint224 from uint256, reverting on\n     * overflow (when the input is greater than largest uint224).\n     *\n     * Counterpart to Solidity's `uint224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     *\n     * _Available since v4.2._\n     */\n    function toUint224(uint256 value) internal pure returns (uint224) {\n        require(value <= type(uint224).max, \"SafeCast: value doesn't fit in 224 bits\");\n        return uint224(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint216 from uint256, reverting on\n     * overflow (when the input is greater than largest uint216).\n     *\n     * Counterpart to Solidity's `uint216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint216(uint256 value) internal pure returns (uint216) {\n        require(value <= type(uint216).max, \"SafeCast: value doesn't fit in 216 bits\");\n        return uint216(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint208 from uint256, reverting on\n     * overflow (when the input is greater than largest uint208).\n     *\n     * Counterpart to Solidity's `uint208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint208(uint256 value) internal pure returns (uint208) {\n        require(value <= type(uint208).max, \"SafeCast: value doesn't fit in 208 bits\");\n        return uint208(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint200 from uint256, reverting on\n     * overflow (when the input is greater than largest uint200).\n     *\n     * Counterpart to Solidity's `uint200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint200(uint256 value) internal pure returns (uint200) {\n        require(value <= type(uint200).max, \"SafeCast: value doesn't fit in 200 bits\");\n        return uint200(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint192 from uint256, reverting on\n     * overflow (when the input is greater than largest uint192).\n     *\n     * Counterpart to Solidity's `uint192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint192(uint256 value) internal pure returns (uint192) {\n        require(value <= type(uint192).max, \"SafeCast: value doesn't fit in 192 bits\");\n        return uint192(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint184 from uint256, reverting on\n     * overflow (when the input is greater than largest uint184).\n     *\n     * Counterpart to Solidity's `uint184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint184(uint256 value) internal pure returns (uint184) {\n        require(value <= type(uint184).max, \"SafeCast: value doesn't fit in 184 bits\");\n        return uint184(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint176 from uint256, reverting on\n     * overflow (when the input is greater than largest uint176).\n     *\n     * Counterpart to Solidity's `uint176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint176(uint256 value) internal pure returns (uint176) {\n        require(value <= type(uint176).max, \"SafeCast: value doesn't fit in 176 bits\");\n        return uint176(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint168 from uint256, reverting on\n     * overflow (when the input is greater than largest uint168).\n     *\n     * Counterpart to Solidity's `uint168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint168(uint256 value) internal pure returns (uint168) {\n        require(value <= type(uint168).max, \"SafeCast: value doesn't fit in 168 bits\");\n        return uint168(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint160 from uint256, reverting on\n     * overflow (when the input is greater than largest uint160).\n     *\n     * Counterpart to Solidity's `uint160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint160(uint256 value) internal pure returns (uint160) {\n        require(value <= type(uint160).max, \"SafeCast: value doesn't fit in 160 bits\");\n        return uint160(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint152 from uint256, reverting on\n     * overflow (when the input is greater than largest uint152).\n     *\n     * Counterpart to Solidity's `uint152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint152(uint256 value) internal pure returns (uint152) {\n        require(value <= type(uint152).max, \"SafeCast: value doesn't fit in 152 bits\");\n        return uint152(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint144 from uint256, reverting on\n     * overflow (when the input is greater than largest uint144).\n     *\n     * Counterpart to Solidity's `uint144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint144(uint256 value) internal pure returns (uint144) {\n        require(value <= type(uint144).max, \"SafeCast: value doesn't fit in 144 bits\");\n        return uint144(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint136 from uint256, reverting on\n     * overflow (when the input is greater than largest uint136).\n     *\n     * Counterpart to Solidity's `uint136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint136(uint256 value) internal pure returns (uint136) {\n        require(value <= type(uint136).max, \"SafeCast: value doesn't fit in 136 bits\");\n        return uint136(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint128 from uint256, reverting on\n     * overflow (when the input is greater than largest uint128).\n     *\n     * Counterpart to Solidity's `uint128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint128(uint256 value) internal pure returns (uint128) {\n        require(value <= type(uint128).max, \"SafeCast: value doesn't fit in 128 bits\");\n        return uint128(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint120 from uint256, reverting on\n     * overflow (when the input is greater than largest uint120).\n     *\n     * Counterpart to Solidity's `uint120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint120(uint256 value) internal pure returns (uint120) {\n        require(value <= type(uint120).max, \"SafeCast: value doesn't fit in 120 bits\");\n        return uint120(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint112 from uint256, reverting on\n     * overflow (when the input is greater than largest uint112).\n     *\n     * Counterpart to Solidity's `uint112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint112(uint256 value) internal pure returns (uint112) {\n        require(value <= type(uint112).max, \"SafeCast: value doesn't fit in 112 bits\");\n        return uint112(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint104 from uint256, reverting on\n     * overflow (when the input is greater than largest uint104).\n     *\n     * Counterpart to Solidity's `uint104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint104(uint256 value) internal pure returns (uint104) {\n        require(value <= type(uint104).max, \"SafeCast: value doesn't fit in 104 bits\");\n        return uint104(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint96 from uint256, reverting on\n     * overflow (when the input is greater than largest uint96).\n     *\n     * Counterpart to Solidity's `uint96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     *\n     * _Available since v4.2._\n     */\n    function toUint96(uint256 value) internal pure returns (uint96) {\n        require(value <= type(uint96).max, \"SafeCast: value doesn't fit in 96 bits\");\n        return uint96(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint88 from uint256, reverting on\n     * overflow (when the input is greater than largest uint88).\n     *\n     * Counterpart to Solidity's `uint88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint88(uint256 value) internal pure returns (uint88) {\n        require(value <= type(uint88).max, \"SafeCast: value doesn't fit in 88 bits\");\n        return uint88(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint80 from uint256, reverting on\n     * overflow (when the input is greater than largest uint80).\n     *\n     * Counterpart to Solidity's `uint80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint80(uint256 value) internal pure returns (uint80) {\n        require(value <= type(uint80).max, \"SafeCast: value doesn't fit in 80 bits\");\n        return uint80(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint72 from uint256, reverting on\n     * overflow (when the input is greater than largest uint72).\n     *\n     * Counterpart to Solidity's `uint72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint72(uint256 value) internal pure returns (uint72) {\n        require(value <= type(uint72).max, \"SafeCast: value doesn't fit in 72 bits\");\n        return uint72(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint64 from uint256, reverting on\n     * overflow (when the input is greater than largest uint64).\n     *\n     * Counterpart to Solidity's `uint64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint64(uint256 value) internal pure returns (uint64) {\n        require(value <= type(uint64).max, \"SafeCast: value doesn't fit in 64 bits\");\n        return uint64(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint56 from uint256, reverting on\n     * overflow (when the input is greater than largest uint56).\n     *\n     * Counterpart to Solidity's `uint56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint56(uint256 value) internal pure returns (uint56) {\n        require(value <= type(uint56).max, \"SafeCast: value doesn't fit in 56 bits\");\n        return uint56(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint48 from uint256, reverting on\n     * overflow (when the input is greater than largest uint48).\n     *\n     * Counterpart to Solidity's `uint48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint48(uint256 value) internal pure returns (uint48) {\n        require(value <= type(uint48).max, \"SafeCast: value doesn't fit in 48 bits\");\n        return uint48(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint40 from uint256, reverting on\n     * overflow (when the input is greater than largest uint40).\n     *\n     * Counterpart to Solidity's `uint40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint40(uint256 value) internal pure returns (uint40) {\n        require(value <= type(uint40).max, \"SafeCast: value doesn't fit in 40 bits\");\n        return uint40(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint32 from uint256, reverting on\n     * overflow (when the input is greater than largest uint32).\n     *\n     * Counterpart to Solidity's `uint32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint32(uint256 value) internal pure returns (uint32) {\n        require(value <= type(uint32).max, \"SafeCast: value doesn't fit in 32 bits\");\n        return uint32(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint24 from uint256, reverting on\n     * overflow (when the input is greater than largest uint24).\n     *\n     * Counterpart to Solidity's `uint24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint24(uint256 value) internal pure returns (uint24) {\n        require(value <= type(uint24).max, \"SafeCast: value doesn't fit in 24 bits\");\n        return uint24(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint16 from uint256, reverting on\n     * overflow (when the input is greater than largest uint16).\n     *\n     * Counterpart to Solidity's `uint16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint16(uint256 value) internal pure returns (uint16) {\n        require(value <= type(uint16).max, \"SafeCast: value doesn't fit in 16 bits\");\n        return uint16(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint8 from uint256, reverting on\n     * overflow (when the input is greater than largest uint8).\n     *\n     * Counterpart to Solidity's `uint8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint8(uint256 value) internal pure returns (uint8) {\n        require(value <= type(uint8).max, \"SafeCast: value doesn't fit in 8 bits\");\n        return uint8(value);\n    }\n\n    /**\n     * @dev Converts a signed int256 into an unsigned uint256.\n     *\n     * Requirements:\n     *\n     * - input must be greater than or equal to 0.\n     *\n     * _Available since v3.0._\n     */\n    function toUint256(int256 value) internal pure returns (uint256) {\n        require(value >= 0, \"SafeCast: value must be positive\");\n        return uint256(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int248 from int256, reverting on\n     * overflow (when the input is less than smallest int248 or\n     * greater than largest int248).\n     *\n     * Counterpart to Solidity's `int248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt248(int256 value) internal pure returns (int248 downcasted) {\n        downcasted = int248(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 248 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int240 from int256, reverting on\n     * overflow (when the input is less than smallest int240 or\n     * greater than largest int240).\n     *\n     * Counterpart to Solidity's `int240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt240(int256 value) internal pure returns (int240 downcasted) {\n        downcasted = int240(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 240 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int232 from int256, reverting on\n     * overflow (when the input is less than smallest int232 or\n     * greater than largest int232).\n     *\n     * Counterpart to Solidity's `int232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt232(int256 value) internal pure returns (int232 downcasted) {\n        downcasted = int232(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 232 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int224 from int256, reverting on\n     * overflow (when the input is less than smallest int224 or\n     * greater than largest int224).\n     *\n     * Counterpart to Solidity's `int224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt224(int256 value) internal pure returns (int224 downcasted) {\n        downcasted = int224(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 224 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int216 from int256, reverting on\n     * overflow (when the input is less than smallest int216 or\n     * greater than largest int216).\n     *\n     * Counterpart to Solidity's `int216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt216(int256 value) internal pure returns (int216 downcasted) {\n        downcasted = int216(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 216 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int208 from int256, reverting on\n     * overflow (when the input is less than smallest int208 or\n     * greater than largest int208).\n     *\n     * Counterpart to Solidity's `int208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt208(int256 value) internal pure returns (int208 downcasted) {\n        downcasted = int208(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 208 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int200 from int256, reverting on\n     * overflow (when the input is less than smallest int200 or\n     * greater than largest int200).\n     *\n     * Counterpart to Solidity's `int200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt200(int256 value) internal pure returns (int200 downcasted) {\n        downcasted = int200(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 200 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int192 from int256, reverting on\n     * overflow (when the input is less than smallest int192 or\n     * greater than largest int192).\n     *\n     * Counterpart to Solidity's `int192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt192(int256 value) internal pure returns (int192 downcasted) {\n        downcasted = int192(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 192 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int184 from int256, reverting on\n     * overflow (when the input is less than smallest int184 or\n     * greater than largest int184).\n     *\n     * Counterpart to Solidity's `int184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt184(int256 value) internal pure returns (int184 downcasted) {\n        downcasted = int184(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 184 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int176 from int256, reverting on\n     * overflow (when the input is less than smallest int176 or\n     * greater than largest int176).\n     *\n     * Counterpart to Solidity's `int176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt176(int256 value) internal pure returns (int176 downcasted) {\n        downcasted = int176(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 176 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int168 from int256, reverting on\n     * overflow (when the input is less than smallest int168 or\n     * greater than largest int168).\n     *\n     * Counterpart to Solidity's `int168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt168(int256 value) internal pure returns (int168 downcasted) {\n        downcasted = int168(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 168 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int160 from int256, reverting on\n     * overflow (when the input is less than smallest int160 or\n     * greater than largest int160).\n     *\n     * Counterpart to Solidity's `int160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt160(int256 value) internal pure returns (int160 downcasted) {\n        downcasted = int160(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 160 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int152 from int256, reverting on\n     * overflow (when the input is less than smallest int152 or\n     * greater than largest int152).\n     *\n     * Counterpart to Solidity's `int152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt152(int256 value) internal pure returns (int152 downcasted) {\n        downcasted = int152(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 152 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int144 from int256, reverting on\n     * overflow (when the input is less than smallest int144 or\n     * greater than largest int144).\n     *\n     * Counterpart to Solidity's `int144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt144(int256 value) internal pure returns (int144 downcasted) {\n        downcasted = int144(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 144 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int136 from int256, reverting on\n     * overflow (when the input is less than smallest int136 or\n     * greater than largest int136).\n     *\n     * Counterpart to Solidity's `int136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt136(int256 value) internal pure returns (int136 downcasted) {\n        downcasted = int136(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 136 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int128 from int256, reverting on\n     * overflow (when the input is less than smallest int128 or\n     * greater than largest int128).\n     *\n     * Counterpart to Solidity's `int128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt128(int256 value) internal pure returns (int128 downcasted) {\n        downcasted = int128(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 128 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int120 from int256, reverting on\n     * overflow (when the input is less than smallest int120 or\n     * greater than largest int120).\n     *\n     * Counterpart to Solidity's `int120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt120(int256 value) internal pure returns (int120 downcasted) {\n        downcasted = int120(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 120 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int112 from int256, reverting on\n     * overflow (when the input is less than smallest int112 or\n     * greater than largest int112).\n     *\n     * Counterpart to Solidity's `int112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt112(int256 value) internal pure returns (int112 downcasted) {\n        downcasted = int112(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 112 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int104 from int256, reverting on\n     * overflow (when the input is less than smallest int104 or\n     * greater than largest int104).\n     *\n     * Counterpart to Solidity's `int104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt104(int256 value) internal pure returns (int104 downcasted) {\n        downcasted = int104(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 104 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int96 from int256, reverting on\n     * overflow (when the input is less than smallest int96 or\n     * greater than largest int96).\n     *\n     * Counterpart to Solidity's `int96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt96(int256 value) internal pure returns (int96 downcasted) {\n        downcasted = int96(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 96 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int88 from int256, reverting on\n     * overflow (when the input is less than smallest int88 or\n     * greater than largest int88).\n     *\n     * Counterpart to Solidity's `int88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt88(int256 value) internal pure returns (int88 downcasted) {\n        downcasted = int88(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 88 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int80 from int256, reverting on\n     * overflow (when the input is less than smallest int80 or\n     * greater than largest int80).\n     *\n     * Counterpart to Solidity's `int80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt80(int256 value) internal pure returns (int80 downcasted) {\n        downcasted = int80(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 80 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int72 from int256, reverting on\n     * overflow (when the input is less than smallest int72 or\n     * greater than largest int72).\n     *\n     * Counterpart to Solidity's `int72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt72(int256 value) internal pure returns (int72 downcasted) {\n        downcasted = int72(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 72 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int64 from int256, reverting on\n     * overflow (when the input is less than smallest int64 or\n     * greater than largest int64).\n     *\n     * Counterpart to Solidity's `int64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt64(int256 value) internal pure returns (int64 downcasted) {\n        downcasted = int64(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 64 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int56 from int256, reverting on\n     * overflow (when the input is less than smallest int56 or\n     * greater than largest int56).\n     *\n     * Counterpart to Solidity's `int56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt56(int256 value) internal pure returns (int56 downcasted) {\n        downcasted = int56(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 56 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int48 from int256, reverting on\n     * overflow (when the input is less than smallest int48 or\n     * greater than largest int48).\n     *\n     * Counterpart to Solidity's `int48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt48(int256 value) internal pure returns (int48 downcasted) {\n        downcasted = int48(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 48 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int40 from int256, reverting on\n     * overflow (when the input is less than smallest int40 or\n     * greater than largest int40).\n     *\n     * Counterpart to Solidity's `int40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt40(int256 value) internal pure returns (int40 downcasted) {\n        downcasted = int40(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 40 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int32 from int256, reverting on\n     * overflow (when the input is less than smallest int32 or\n     * greater than largest int32).\n     *\n     * Counterpart to Solidity's `int32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt32(int256 value) internal pure returns (int32 downcasted) {\n        downcasted = int32(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 32 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int24 from int256, reverting on\n     * overflow (when the input is less than smallest int24 or\n     * greater than largest int24).\n     *\n     * Counterpart to Solidity's `int24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt24(int256 value) internal pure returns (int24 downcasted) {\n        downcasted = int24(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 24 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int16 from int256, reverting on\n     * overflow (when the input is less than smallest int16 or\n     * greater than largest int16).\n     *\n     * Counterpart to Solidity's `int16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt16(int256 value) internal pure returns (int16 downcasted) {\n        downcasted = int16(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 16 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int8 from int256, reverting on\n     * overflow (when the input is less than smallest int8 or\n     * greater than largest int8).\n     *\n     * Counterpart to Solidity's `int8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt8(int256 value) internal pure returns (int8 downcasted) {\n        downcasted = int8(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 8 bits\");\n    }\n\n    /**\n     * @dev Converts an unsigned uint256 into a signed int256.\n     *\n     * Requirements:\n     *\n     * - input must be less than or equal to maxInt256.\n     *\n     * _Available since v3.0._\n     */\n    function toInt256(uint256 value) internal pure returns (int256) {\n        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n        require(value <= uint256(type(int256).max), \"SafeCast: value doesn't fit in an int256\");\n        return int256(value);\n    }\n}\n"
@@ -119,10 +119,10 @@
       "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\n/// @notice Thrown if the supplied address is a zero address where it is not allowed\nerror ZeroAddressNotAllowed();\n\n/// @notice Thrown if the supplied value is 0 where it is not allowed\nerror ZeroValueNotAllowed();\n\n/// @notice Checks if the provided address is nonzero, reverts otherwise\n/// @param address_ Address to check\n/// @custom:error ZeroAddressNotAllowed is thrown if the provided address is a zero address\nfunction ensureNonzeroAddress(address address_) pure {\n    if (address_ == address(0)) {\n        revert ZeroAddressNotAllowed();\n    }\n}\n\n/// @notice Checks if the provided value is nonzero, reverts otherwise\n/// @param value_ Value to check\n/// @custom:error ZeroValueNotAllowed is thrown if the provided value is 0\nfunction ensureNonzeroValue(uint256 value_) pure {\n    if (value_ == 0) {\n        revert ZeroValueNotAllowed();\n    }\n}\n"
     },
     "contracts/Admin/VBNBAdmin.sol": {
-      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport \"@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol\";\nimport \"@venusprotocol/governance-contracts/contracts/Governance/AccessControlledV8.sol\";\nimport \"@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol\";\nimport { IProtocolShareReserve, IWBNB, VBNBAdminStorage, VTokenInterface } from \"./VBNBAdminStorage.sol\";\n\n/**\n * @title VBNBAdmin\n * @author Venus\n * @notice This contract is the \"admin\" of the vBNB market, reducing the reserves of the market, sending them to the `ProtocolShareReserve` contract,\n * and allowing the executions of the rest of the privileged functions in the vBNB contract (after checking if the sender has the required permissions).\n */\ncontract VBNBAdmin is ReentrancyGuardUpgradeable, AccessControlledV8, VBNBAdminStorage {\n    using SafeERC20Upgradeable for IWBNB;\n\n    /// @notice address of vBNB\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    VTokenInterface public immutable vBNB;\n\n    /// @notice address of WBNB contract\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    IWBNB public immutable WBNB;\n\n    /// @notice Emitted when PSR is updated\n    event ProtocolShareReserveUpdated(\n        IProtocolShareReserve indexed oldProtocolShareReserve,\n        IProtocolShareReserve indexed newProtocolShareReserve\n    );\n\n    /// @notice Emitted reserves are reduced\n    event ReservesReduced(uint256 reduceAmount);\n\n    /// @param _vBNB Address of the vBNB contract\n    /// @param _WBNB Address of the WBNB token\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor(VTokenInterface _vBNB, IWBNB _WBNB) {\n        require(address(_WBNB) != address(0), \"WBNB address invalid\");\n        require(address(_vBNB) != address(0), \"vBNB address invalid\");\n\n        vBNB = _vBNB;\n        WBNB = _WBNB;\n\n        // Note that the contract is upgradeable. Use initialize() or reinitializers\n        // to set the state variables.\n        _disableInitializers();\n    }\n\n    /// @notice Used to initialize non-immutable variables\n    function initialize(\n        IProtocolShareReserve _protocolShareReserve,\n        address accessControlManager\n    ) external initializer {\n        require(address(_protocolShareReserve) != address(0), \"PSR address invalid\");\n        protocolShareReserve = _protocolShareReserve;\n\n        __ReentrancyGuard_init();\n        __AccessControlled_init(accessControlManager);\n    }\n\n    /**\n     * @notice PSR setter.\n     * @param protocolShareReserve_ Address of the PSR contract\n     * @custom:access Only owner (Governance)\n     * @custom:event Emits ProtocolShareReserveUpdated event.\n     */\n    function setProtocolShareReserve(IProtocolShareReserve protocolShareReserve_) external onlyOwner {\n        require(address(protocolShareReserve_) != address(0), \"PSR address invalid\");\n        emit ProtocolShareReserveUpdated(protocolShareReserve, protocolShareReserve_);\n        protocolShareReserve = protocolShareReserve_;\n    }\n\n    /**\n     * @notice Reduce reserves of vBNB, wrap them and send them to the PSR contract\n     * @param reduceAmount amount of reserves to reduce\n     * @custom:event Emits ReservesReduced event.\n     */\n    function reduceReserves(uint reduceAmount) external nonReentrant {\n        require(vBNB._reduceReserves(reduceAmount) == 0, \"reduceReserves failed\");\n        _wrapBNB();\n\n        uint256 balance = WBNB.balanceOf(address(this));\n        WBNB.safeTransfer(address(protocolShareReserve), balance);\n        protocolShareReserve.updateAssetsState(\n            vBNB.comptroller(),\n            address(WBNB),\n            IProtocolShareReserve.IncomeType.SPREAD\n        );\n\n        emit ReservesReduced(reduceAmount);\n    }\n\n    /**\n     * @notice Wraps BNB into WBNB\n     */\n    function _wrapBNB() internal {\n        uint256 bnbBalance = address(this).balance;\n        WBNB.deposit{ value: bnbBalance }();\n    }\n\n    /**\n     * @notice Invoked when BNB is sent to this contract\n     * @custom:access Only vBNB is considered a valid sender\n     */\n    receive() external payable {\n        require(msg.sender == address(vBNB), \"only vBNB can send BNB to this contract\");\n    }\n\n    /**\n     * @notice Invoked when called function does not exist in the contract. The function will be executed in the vBNB contract.\n     * @custom:access Only owner (Governance)\n     */\n    fallback(bytes calldata data) external payable onlyOwner returns (bytes memory) {\n        (bool ok, bytes memory res) = address(vBNB).call{ value: msg.value }(data);\n        require(ok, \"call failed\");\n        return res;\n    }\n}\n"
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport \"@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol\";\nimport \"@venusprotocol/governance-contracts/contracts/Governance/AccessControlledV8.sol\";\nimport \"@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol\";\nimport { IProtocolShareReserve, IWBNB, VBNBAdminStorage, VTokenInterface } from \"./VBNBAdminStorage.sol\";\n\n/**\n * @title VBNBAdmin\n * @author Venus\n * @notice This contract is the \"admin\" of the vBNB market, reducing the reserves of the market, sending them to the `ProtocolShareReserve` contract,\n * and allowing the executions of the rest of the privileged functions in the vBNB contract (after checking if the sender has the required permissions).\n */\ncontract VBNBAdmin is ReentrancyGuardUpgradeable, AccessControlledV8, VBNBAdminStorage {\n    using SafeERC20Upgradeable for IWBNB;\n\n    /// @notice address of vBNB\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    VTokenInterface public immutable vBNB;\n\n    /// @notice address of WBNB contract\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    IWBNB public immutable WBNB;\n\n    /// @notice Emitted when PSR is updated\n    event ProtocolShareReserveUpdated(\n        IProtocolShareReserve indexed oldProtocolShareReserve,\n        IProtocolShareReserve indexed newProtocolShareReserve\n    );\n\n    /// @notice Emitted reserves are reduced\n    event ReservesReduced(uint256 reduceAmount);\n\n    /// @param _vBNB Address of the vBNB contract\n    /// @param _WBNB Address of the WBNB token\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor(VTokenInterface _vBNB, IWBNB _WBNB) {\n        require(address(_WBNB) != address(0), \"WBNB address invalid\");\n        require(address(_vBNB) != address(0), \"vBNB address invalid\");\n\n        vBNB = _vBNB;\n        WBNB = _WBNB;\n\n        // Note that the contract is upgradeable. Use initialize() or reinitializers\n        // to set the state variables.\n        _disableInitializers();\n    }\n\n    /// @notice Used to initialize non-immutable variables\n    function initialize(\n        IProtocolShareReserve _protocolShareReserve,\n        address accessControlManager\n    ) external initializer {\n        require(address(_protocolShareReserve) != address(0), \"PSR address invalid\");\n        protocolShareReserve = _protocolShareReserve;\n\n        __ReentrancyGuard_init();\n        __AccessControlled_init(accessControlManager);\n    }\n\n    /**\n     * @notice PSR setter.\n     * @param protocolShareReserve_ Address of the PSR contract\n     * @custom:access Only owner (Governance)\n     * @custom:event Emits ProtocolShareReserveUpdated event.\n     */\n    function setProtocolShareReserve(IProtocolShareReserve protocolShareReserve_) external onlyOwner {\n        require(address(protocolShareReserve_) != address(0), \"PSR address invalid\");\n        emit ProtocolShareReserveUpdated(protocolShareReserve, protocolShareReserve_);\n        protocolShareReserve = protocolShareReserve_;\n    }\n\n    /**\n     * @notice Reduce reserves of vBNB, wrap them and send them to the PSR contract\n     * @param reduceAmount amount of reserves to reduce\n     * @custom:event Emits ReservesReduced event.\n     */\n    function reduceReserves(uint reduceAmount) external nonReentrant {\n        require(vBNB._reduceReserves(reduceAmount) == 0, \"reduceReserves failed\");\n        _wrapBNB();\n\n        uint256 balance = WBNB.balanceOf(address(this));\n        WBNB.safeTransfer(address(protocolShareReserve), balance);\n        protocolShareReserve.updateAssetsState(\n            vBNB.comptroller(),\n            address(WBNB),\n            IProtocolShareReserve.IncomeType.SPREAD\n        );\n\n        emit ReservesReduced(reduceAmount);\n    }\n\n    /**\n     * @notice Sets the interest rate model of the vBNB contract\n     * @param newInterestRateModel Address of the new interest rate model\n     * @custom:access Controlled by ACM\n     */\n    function setInterestRateModel(address newInterestRateModel) public returns (uint256) {\n        _checkAccessAllowed(\"setInterestRateModel(address)\");\n        return vBNB._setInterestRateModel(newInterestRateModel);\n    }\n\n    /**\n     * @notice Wraps BNB into WBNB\n     */\n    function _wrapBNB() internal {\n        uint256 bnbBalance = address(this).balance;\n        WBNB.deposit{ value: bnbBalance }();\n    }\n\n    /**\n     * @notice Invoked when BNB is sent to this contract\n     * @custom:access Only vBNB is considered a valid sender\n     */\n    receive() external payable {\n        require(msg.sender == address(vBNB), \"only vBNB can send BNB to this contract\");\n    }\n\n    /**\n     * @notice Invoked when called function does not exist in the contract. The function will be executed in the vBNB contract.\n     * @custom:access Only owner (Governance)\n     */\n    fallback(bytes calldata data) external payable onlyOwner returns (bytes memory) {\n        (bool ok, bytes memory res) = address(vBNB).call{ value: msg.value }(data);\n        require(ok, \"call failed\");\n        return res;\n    }\n}\n"
     },
     "contracts/Admin/VBNBAdminStorage.sol": {
-      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport \"@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol\";\n\ninterface VTokenInterface {\n    function _reduceReserves(uint reduceAmount) external returns (uint);\n\n    function _acceptAdmin() external returns (uint);\n\n    function comptroller() external returns (address);\n}\n\ninterface IWBNB is IERC20Upgradeable {\n    function deposit() external payable;\n}\n\ninterface IProtocolShareReserve {\n    enum IncomeType {\n        SPREAD,\n        LIQUIDATION\n    }\n\n    function updateAssetsState(address comptroller, address asset, IncomeType incomeType) external;\n}\n\ncontract VBNBAdminStorage {\n    /// @notice address of protocol share reserve contract\n    IProtocolShareReserve public protocolShareReserve;\n\n    /// @dev gap to prevent collision in inheritence\n    uint256[49] private __gap;\n}\n"
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport \"@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol\";\n\ninterface VTokenInterface {\n    function _reduceReserves(uint reduceAmount) external returns (uint);\n\n    function _acceptAdmin() external returns (uint);\n\n    function comptroller() external returns (address);\n\n    function _setInterestRateModel(address newInterestRateModel) external returns (uint);\n}\n\ninterface IWBNB is IERC20Upgradeable {\n    function deposit() external payable;\n}\n\ninterface IProtocolShareReserve {\n    enum IncomeType {\n        SPREAD,\n        LIQUIDATION\n    }\n\n    function updateAssetsState(address comptroller, address asset, IncomeType incomeType) external;\n}\n\ncontract VBNBAdminStorage {\n    /// @notice address of protocol share reserve contract\n    IProtocolShareReserve public protocolShareReserve;\n\n    /// @dev gap to prevent collision in inheritence\n    uint256[49] private __gap;\n}\n"
     },
     "contracts/DelegateBorrowers/MoveDebtDelegate.sol": {
       "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport { Ownable2StepUpgradeable } from \"@openzeppelin/contracts-upgradeable/access/Ownable2StepUpgradeable.sol\";\nimport { ReentrancyGuardUpgradeable } from \"@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol\";\nimport { SafeERC20Upgradeable } from \"@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol\";\nimport { IERC20Upgradeable } from \"@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol\";\nimport { ResilientOracleInterface } from \"@venusprotocol/oracle/contracts/interfaces/OracleInterface.sol\";\nimport { ensureNonzeroAddress } from \"@venusprotocol/solidity-utilities/contracts/validators.sol\";\n\nimport { approveOrRevert } from \"../lib/approveOrRevert.sol\";\nimport { IVBep20, IComptroller } from \"../InterfacesV8.sol\";\n\ncontract MoveDebtDelegate is Ownable2StepUpgradeable, ReentrancyGuardUpgradeable {\n    /// @dev VToken return value signalling about successful execution\n    uint256 internal constant NO_ERROR = 0;\n\n    /// @notice A wildcard indicating that repayment is allowed for _any_ user in the market\n    address public constant ANY_USER = address(1);\n\n    /// @notice User to borrow on behalf of\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    address public immutable newBorrower;\n\n    /// @notice Whether to allow borrowing from the corresponding vToken\n    mapping(address => bool) public borrowAllowed;\n\n    /// @notice Whether to allow repaying to the corresponding vToken on behalf of\n    ///   a certain user. Use ANY_USER to check if repayment is allowed for any user.\n    mapping(address => mapping(address => bool)) public repaymentAllowed;\n\n    /// @notice Emitted when vToken is allowed or denied to be borrowed from\n    event BorrowAllowedSet(address indexed vTokenToBorrow, bool allowed);\n\n    /// @notice Emitted when vToken is allowed or denied to be borrowed from\n    event RepaymentAllowedSet(address indexed vTokenToRepay, address indexed originalBorrower, bool allowed);\n\n    /// @notice Emitted if debt is swapped successfully\n    event DebtMoved(\n        address indexed originalBorrower,\n        address indexed vTokenRepaid,\n        uint256 repaidAmount,\n        address newBorrower,\n        address indexed vTokenBorrowed,\n        uint256 borrowedAmount\n    );\n\n    /// @notice Emitted when the owner transfers tokens, accidentially sent to this contract,\n    ///   to their account\n    event SweptTokens(address indexed token, uint256 amount);\n\n    /// @notice Thrown if VTokens' comptrollers are not equal\n    error ComptrollerMismatch();\n\n    /// @notice Thrown if repayment fails with an error code\n    error RepaymentFailed(uint256 errorCode);\n\n    /// @notice Thrown if borrow fails with an error code\n    error BorrowFailed(uint256 errorCode);\n\n    /// @notice Thrown if borrowing from the corresponding vToken is not allowed\n    error BorrowNotAllowed(address vToken);\n\n    /// @notice Thrown if repaying the debts of the borrower to the corresponding vToken is not allowed\n    error RepaymentNotAllowed(address vToken, address borrower);\n\n    using SafeERC20Upgradeable for IERC20Upgradeable;\n\n    /// @notice Constructor for the implementation contract. Sets immutable variables.\n    /// @param newBorrower_ User to borrow on behalf of\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor(address newBorrower_) {\n        newBorrower = newBorrower_;\n        _disableInitializers();\n    }\n\n    function initialize() external initializer {\n        __Ownable2Step_init();\n        __ReentrancyGuard_init();\n    }\n\n    /**\n     * @notice Repays originalBorrower's borrow in vTokenToRepay.underlying() and borrows\n     *   vTokenToBorrow.underlying() on behalf of newBorrower.\n     *\n     * @param originalBorrower The address of the borrower, whose debt to repay\n     * @param vTokenToRepay VToken to repay to on behalf of originalBorrower\n     * @param repayAmount The amount to repay in terms of vTokenToRepay.underlying()\n     * @param vTokenToBorrow VToken to borrow from\n     */\n    function moveDebt(\n        IVBep20 vTokenToRepay,\n        address originalBorrower,\n        uint256 repayAmount,\n        IVBep20 vTokenToBorrow\n    ) external nonReentrant {\n        if (!borrowAllowed[address(vTokenToBorrow)]) {\n            revert BorrowNotAllowed(address(vTokenToBorrow));\n        }\n\n        mapping(address => bool) storage repaymentAllowedFor = repaymentAllowed[address(vTokenToRepay)];\n        if (!repaymentAllowedFor[ANY_USER] && !repaymentAllowedFor[originalBorrower]) {\n            revert RepaymentNotAllowed(address(vTokenToRepay), originalBorrower);\n        }\n\n        uint256 actualRepaymentAmount = _repay(vTokenToRepay, originalBorrower, repayAmount);\n        uint256 amountToBorrow = _convert(vTokenToRepay, vTokenToBorrow, actualRepaymentAmount);\n        _borrow(vTokenToBorrow, amountToBorrow);\n        emit DebtMoved(\n            originalBorrower,\n            address(vTokenToRepay),\n            actualRepaymentAmount,\n            newBorrower,\n            address(vTokenToBorrow),\n            amountToBorrow\n        );\n    }\n\n    /**\n     * @notice Allows or denies borrowing from the corresponding vToken\n     * @param vTokenToBorrow VToken to borrow from\n     * @param allow Whether to allow borrowing from the corresponding vToken\n     */\n    function setBorrowAllowed(address vTokenToBorrow, bool allow) external onlyOwner {\n        ensureNonzeroAddress(vTokenToBorrow);\n        if (borrowAllowed[vTokenToBorrow] != allow) {\n            borrowAllowed[vTokenToBorrow] = allow;\n            emit BorrowAllowedSet(vTokenToBorrow, allow);\n        }\n    }\n\n    /**\n     * @notice Allows or denies repaying the debts of originalBorrower to the corresponding vToken\n     * @param vTokenToRepay VToken to repay to\n     * @param originalBorrower The address of the borrower, whose debt to repay (or ANY_USER to allow\n     *   repayments for all users in the market, e.g. if the market is going to be deprecated soon)\n     * @param allow Whether to allow repaying to the corresponding vToken on behalf of originalBorrower\n     */\n    function setRepaymentAllowed(address vTokenToRepay, address originalBorrower, bool allow) external onlyOwner {\n        ensureNonzeroAddress(vTokenToRepay);\n        ensureNonzeroAddress(originalBorrower);\n        if (repaymentAllowed[vTokenToRepay][originalBorrower] != allow) {\n            repaymentAllowed[vTokenToRepay][originalBorrower] = allow;\n            emit RepaymentAllowedSet(vTokenToRepay, originalBorrower, allow);\n        }\n    }\n\n    /**\n     * @notice Transfers tokens, accidentially sent to this contract, to the owner\n     * @param token ERC-20 token to sweep\n     */\n    function sweepTokens(IERC20Upgradeable token) external onlyOwner {\n        uint256 amount = token.balanceOf(address(this));\n        token.safeTransfer(owner(), amount);\n        emit SweptTokens(address(token), amount);\n    }\n\n    /**\n     * @dev Transfers the funds from the sender and repays a borrow in vToken on behalf of the borrower\n     * @param vTokenToRepay VToken to repay to\n     * @param borrower The address of the borrower, whose debt to repay\n     * @param repayAmount The amount to repay in terms of underlying\n     */\n    function _repay(\n        IVBep20 vTokenToRepay,\n        address borrower,\n        uint256 repayAmount\n    ) internal returns (uint256 actualRepaymentAmount) {\n        IERC20Upgradeable underlying = IERC20Upgradeable(vTokenToRepay.underlying());\n        uint256 balanceBefore = underlying.balanceOf(address(this));\n        underlying.safeTransferFrom(msg.sender, address(this), repayAmount);\n        uint256 balanceAfter = underlying.balanceOf(address(this));\n        uint256 repayAmountMinusFee = balanceAfter - balanceBefore;\n\n        uint256 borrowBalanceBefore = vTokenToRepay.borrowBalanceCurrent(borrower);\n        approveOrRevert(underlying, address(vTokenToRepay), repayAmountMinusFee);\n        uint256 err = vTokenToRepay.repayBorrowBehalf(borrower, repayAmountMinusFee);\n        if (err != NO_ERROR) {\n            revert RepaymentFailed(err);\n        }\n        approveOrRevert(underlying, address(vTokenToRepay), 0);\n        uint256 borrowBalanceAfter = vTokenToRepay.borrowBalanceCurrent(borrower);\n        return borrowBalanceBefore - borrowBalanceAfter;\n    }\n\n    /**\n     * @dev Borrows in vToken on behalf of the borrower and transfers the funds to the sender\n     * @param vTokenToBorrow VToken to borrow from\n     * @param borrowAmount The amount to borrow in terms of underlying\n     */\n    function _borrow(IVBep20 vTokenToBorrow, uint256 borrowAmount) internal {\n        IERC20Upgradeable underlying = IERC20Upgradeable(vTokenToBorrow.underlying());\n        uint256 balanceBefore = underlying.balanceOf(address(this));\n        uint256 err = vTokenToBorrow.borrowBehalf(newBorrower, borrowAmount);\n        if (err != NO_ERROR) {\n            revert BorrowFailed(err);\n        }\n        uint256 balanceAfter = underlying.balanceOf(address(this));\n        uint256 actualBorrowedAmount = balanceAfter - balanceBefore;\n        underlying.safeTransfer(msg.sender, actualBorrowedAmount);\n    }\n\n    /**\n     * @dev Converts the value expressed in convertFrom.underlying() to a value\n     *   in convertTo.underlying(), using the oracle price\n     * @param convertFrom VToken to convert from\n     * @param convertTo VToken to convert to\n     * @param amount The amount in convertFrom.underlying()\n     */\n    function _convert(IVBep20 convertFrom, IVBep20 convertTo, uint256 amount) internal view returns (uint256) {\n        IComptroller comptroller = convertFrom.comptroller();\n        if (comptroller != convertTo.comptroller()) {\n            revert ComptrollerMismatch();\n        }\n        ResilientOracleInterface oracle = comptroller.oracle();\n\n        // Decimals are accounted for in the oracle contract\n        uint256 scaledUsdValue = oracle.getUnderlyingPrice(address(convertFrom)) * amount; // the USD value here has 36 decimals\n        return scaledUsdValue / oracle.getUnderlyingPrice(address(convertTo));\n    }\n}\n"
@@ -131,13 +131,25 @@
       "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport { Ownable2StepUpgradeable } from \"@openzeppelin/contracts-upgradeable/access/Ownable2StepUpgradeable.sol\";\nimport { ReentrancyGuardUpgradeable } from \"@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol\";\nimport { SafeERC20Upgradeable } from \"@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol\";\nimport { IERC20Upgradeable } from \"@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol\";\nimport { ResilientOracleInterface } from \"@venusprotocol/oracle/contracts/interfaces/OracleInterface.sol\";\n\nimport { approveOrRevert } from \"../lib/approveOrRevert.sol\";\nimport { IVBep20, IComptroller } from \"../InterfacesV8.sol\";\n\ncontract SwapDebtDelegate is Ownable2StepUpgradeable, ReentrancyGuardUpgradeable {\n    /// @dev VToken return value signalling about successful execution\n    uint256 internal constant NO_ERROR = 0;\n\n    /// @notice Emitted if debt is swapped successfully\n    event DebtSwapped(\n        address indexed borrower,\n        address indexed vTokenRepaid,\n        uint256 repaidAmount,\n        address indexed vTokenBorrowed,\n        uint256 borrowedAmount\n    );\n\n    /// @notice Emitted when the owner transfers tokens, accidentially sent to this contract,\n    ///   to their account\n    event SweptTokens(address indexed token, uint256 amount);\n\n    /// @notice Thrown if VTokens' comptrollers are not equal\n    error ComptrollerMismatch();\n\n    /// @notice Thrown if repayment fails with an error code\n    error RepaymentFailed(uint256 errorCode);\n\n    /// @notice Thrown if borrow fails with an error code\n    error BorrowFailed(uint256 errorCode);\n\n    using SafeERC20Upgradeable for IERC20Upgradeable;\n\n    function initialize() external initializer {\n        __Ownable2Step_init();\n        __ReentrancyGuard_init();\n    }\n\n    /**\n     * @notice Repays a borrow in repayTo.underlying() and borrows borrowFrom.underlying()\n     * @param borrower The address of the borrower, whose debt to swap\n     * @param repayTo VToken to repay the debt to\n     * @param borrowFrom VToken to borrow from\n     * @param repayAmount The amount to repay in terms of repayTo.underlying()\n     */\n    function swapDebt(\n        address borrower,\n        IVBep20 repayTo,\n        IVBep20 borrowFrom,\n        uint256 repayAmount\n    ) external onlyOwner nonReentrant {\n        uint256 actualRepaymentAmount = _repay(repayTo, borrower, repayAmount);\n        uint256 amountToBorrow = _convert(repayTo, borrowFrom, actualRepaymentAmount);\n        _borrow(borrowFrom, borrower, amountToBorrow);\n        emit DebtSwapped(borrower, address(repayTo), actualRepaymentAmount, address(borrowFrom), amountToBorrow);\n    }\n\n    /**\n     * @notice Transfers tokens, accidentially sent to this contract, to the owner\n     * @param token ERC-20 token to sweep\n     */\n    function sweepTokens(IERC20Upgradeable token) external onlyOwner {\n        uint256 amount = token.balanceOf(address(this));\n        token.safeTransfer(owner(), amount);\n        emit SweptTokens(address(token), amount);\n    }\n\n    /**\n     * @dev Transfers the funds from the sender and repays a borrow in vToken on behalf of the borrower\n     * @param vToken VToken to repay the debt to\n     * @param borrower The address of the borrower, whose debt to repay\n     * @param repayAmount The amount to repay in terms of underlying\n     */\n    function _repay(\n        IVBep20 vToken,\n        address borrower,\n        uint256 repayAmount\n    ) internal returns (uint256 actualRepaymentAmount) {\n        IERC20Upgradeable underlying = IERC20Upgradeable(vToken.underlying());\n        uint256 balanceBefore = underlying.balanceOf(address(this));\n        underlying.safeTransferFrom(msg.sender, address(this), repayAmount);\n        uint256 balanceAfter = underlying.balanceOf(address(this));\n        uint256 repayAmountMinusFee = balanceAfter - balanceBefore;\n\n        underlying.safeApprove(address(vToken), 0);\n        underlying.safeApprove(address(vToken), repayAmountMinusFee);\n        uint256 borrowBalanceBefore = vToken.borrowBalanceCurrent(borrower);\n        uint256 err = vToken.repayBorrowBehalf(borrower, repayAmountMinusFee);\n        if (err != NO_ERROR) {\n            revert RepaymentFailed(err);\n        }\n        uint256 borrowBalanceAfter = vToken.borrowBalanceCurrent(borrower);\n        return borrowBalanceBefore - borrowBalanceAfter;\n    }\n\n    /**\n     * @dev Borrows in vToken on behalf of the borrower and transfers the funds to the sender\n     * @param vToken VToken to borrow from\n     * @param borrower The address of the borrower, who will own the borrow\n     * @param borrowAmount The amount to borrow in terms of underlying\n     */\n    function _borrow(IVBep20 vToken, address borrower, uint256 borrowAmount) internal {\n        IERC20Upgradeable underlying = IERC20Upgradeable(vToken.underlying());\n        uint256 balanceBefore = underlying.balanceOf(address(this));\n        uint256 err = vToken.borrowBehalf(borrower, borrowAmount);\n        if (err != NO_ERROR) {\n            revert BorrowFailed(err);\n        }\n        uint256 balanceAfter = underlying.balanceOf(address(this));\n        uint256 actualBorrowedAmount = balanceAfter - balanceBefore;\n        underlying.safeTransfer(msg.sender, actualBorrowedAmount);\n    }\n\n    /**\n     * @dev Converts the value expressed in convertFrom.underlying() to a value\n     *   in convertTo.underlying(), using the oracle price\n     * @param convertFrom VToken to convert from\n     * @param convertTo VToken to convert to\n     * @param amount The amount in convertFrom.underlying()\n     */\n    function _convert(IVBep20 convertFrom, IVBep20 convertTo, uint256 amount) internal view returns (uint256) {\n        IComptroller comptroller = convertFrom.comptroller();\n        if (comptroller != convertTo.comptroller()) {\n            revert ComptrollerMismatch();\n        }\n        ResilientOracleInterface oracle = comptroller.oracle();\n\n        // Decimals are accounted for in the oracle contract\n        uint256 scaledUsdValue = oracle.getUnderlyingPrice(address(convertFrom)) * amount; // the USD value here has 36 decimals\n        return scaledUsdValue / oracle.getUnderlyingPrice(address(convertTo));\n    }\n}\n"
     },
     "contracts/Governance/TokenRedeemer.sol": {
-      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport { ReentrancyGuard } from \"@openzeppelin/contracts/security/ReentrancyGuard.sol\";\nimport { Ownable2Step } from \"@openzeppelin/contracts/access/Ownable2Step.sol\";\nimport { ensureNonzeroAddress } from \"@venusprotocol/solidity-utilities/contracts/validators.sol\";\n\nimport { IVToken, IVBep20, IVBNB } from \"../InterfacesV8.sol\";\nimport { Currency, CurrencyLibrary } from \"../lib/Currency.sol\";\n\ncontract TokenRedeemer is ReentrancyGuard, Ownable2Step {\n    using CurrencyLibrary for Currency;\n\n    struct AccountBorrows {\n        address borrower;\n        uint256 amount;\n    }\n\n    struct Borrows {\n        uint256 totalBorrows;\n        AccountBorrows[] accountBorrows;\n    }\n\n    IVBNB public immutable VBNB;\n\n    error AccrueInterestFailed(uint256 errCode);\n    error RedeemFailed(uint256 errCode);\n    error RepaymentFailed(uint256 errCode);\n    error NativeTokenTransferFailed();\n\n    constructor(address owner_, IVBNB vBNB) {\n        ensureNonzeroAddress(owner_);\n        VBNB = vBNB;\n        _transferOwnership(owner_);\n    }\n\n    receive() external payable {}\n\n    function redeemAndTransfer(IVToken vToken, address destination) external nonReentrant onlyOwner {\n        Currency underlying = _underlying(vToken);\n        uint256 err = vToken.redeem(vToken.balanceOf(address(this)));\n        if (err != 0) {\n            revert RedeemFailed(err);\n        }\n        underlying.transferAll(destination);\n    }\n\n    function redeemUnderlyingAndRepayBorrowBehalf(\n        IVToken vToken,\n        address borrower,\n        uint256 amount,\n        address receiver\n    ) external nonReentrant onlyOwner {\n        Currency underlying = _underlying(vToken);\n\n        uint256 err = vToken.redeemUnderlying(amount);\n        if (err != 0) {\n            revert RedeemFailed(err);\n        }\n\n        underlying.approve(address(vToken), amount);\n\n        _repay(vToken, borrower, amount);\n\n        underlying.approve(address(vToken), 0);\n\n        underlying.transferAll(receiver);\n        Currency.wrap(address(vToken)).transferAll(receiver);\n    }\n\n    function redeemAndBatchRepay(\n        IVToken vToken,\n        address[] calldata borrowers,\n        address receiver\n    ) external nonReentrant onlyOwner {\n        _accrueInterest(vToken);\n\n        (uint256 totalBorrowedAmount, AccountBorrows[] memory borrows) = _getBorrows(vToken, borrowers);\n        _redeemUpTo(vToken, totalBorrowedAmount);\n\n        Currency underlying = _underlying(vToken);\n        uint256 balance = underlying.balanceOfSelf();\n        underlying.approve(address(vToken), totalBorrowedAmount);\n        uint256 borrowsCount = borrows.length;\n        // The code below assumes no fees on transfer\n        if (balance >= totalBorrowedAmount) {\n            // If we're doing a full repayment, we can optimize it by skipping the balance checks\n            for (uint256 i = 0; i < borrowsCount; ++i) {\n                AccountBorrows memory accountBorrows = borrows[i];\n                _repay(vToken, accountBorrows.borrower, accountBorrows.amount);\n            }\n        } else {\n            // Otherwise, we have to check and update the balance on every iteration\n            for (uint256 i = 0; i < borrowsCount && balance != 0; ++i) {\n                AccountBorrows memory accountBorrows = borrows[i];\n                _repay(vToken, accountBorrows.borrower, _min(accountBorrows.amount, balance));\n                balance = underlying.balanceOfSelf();\n            }\n        }\n        underlying.approve(address(vToken), 0);\n\n        underlying.transferAll(receiver);\n        Currency.wrap(address(vToken)).transferAll(receiver);\n    }\n\n    function sweepTokens(address token, address destination) external onlyOwner {\n        Currency.wrap(token).transferAll(destination);\n    }\n\n    function _accrueInterest(IVToken vToken) internal {\n        uint256 err = vToken.accrueInterest();\n        if (err != 0) {\n            revert AccrueInterestFailed(err);\n        }\n    }\n\n    function _redeemUpTo(IVToken vToken, uint256 amount) internal {\n        uint256 unredeemedUnderlying = vToken.balanceOfUnderlying(address(this));\n        if (unredeemedUnderlying > 0) {\n            uint256 err = vToken.redeemUnderlying(_min(amount, unredeemedUnderlying));\n            if (err != 0) {\n                revert RedeemFailed(err);\n            }\n        }\n    }\n\n    function _repay(IVToken vToken, address borrower, uint256 amount) internal {\n        if (amount == 0) {\n            return;\n        }\n        if (_isVBNB(vToken)) {\n            IVBNB(address(vToken)).repayBorrowBehalf{ value: amount }(borrower);\n        } else {\n            uint256 err = IVBep20(address(vToken)).repayBorrowBehalf(borrower, amount);\n            if (err != 0) {\n                revert RepaymentFailed(err);\n            }\n        }\n    }\n\n    function _getBorrows(\n        IVToken vToken,\n        address[] calldata borrowers\n    ) internal view returns (uint256, AccountBorrows[] memory) {\n        uint256 borrowersCount = borrowers.length;\n        AccountBorrows[] memory borrows = new AccountBorrows[](borrowersCount);\n        uint256 totalBorrowedAmount = 0;\n        for (uint256 i = 0; i < borrowers.length; ++i) {\n            address borrower = borrowers[i];\n            uint256 amount = vToken.borrowBalanceStored(borrower);\n            totalBorrowedAmount += amount;\n            borrows[i] = AccountBorrows({ borrower: borrower, amount: amount });\n        }\n        return (totalBorrowedAmount, borrows);\n    }\n\n    function _underlying(IVToken vToken) internal view returns (Currency) {\n        if (_isVBNB(vToken)) {\n            return CurrencyLibrary.NATIVE;\n        }\n        return Currency.wrap(IVBep20(address(vToken)).underlying());\n    }\n\n    function _isVBNB(IVToken vToken) internal view returns (bool) {\n        return address(vToken) == address(VBNB);\n    }\n\n    function _min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n}\n"
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport { ReentrancyGuard } from \"@openzeppelin/contracts/security/ReentrancyGuard.sol\";\nimport { Ownable2Step } from \"@openzeppelin/contracts/access/Ownable2Step.sol\";\nimport { ensureNonzeroAddress } from \"@venusprotocol/solidity-utilities/contracts/validators.sol\";\n\nimport { IVAIController, IVToken, IVBep20, IVBNB } from \"../InterfacesV8.sol\";\nimport { Currency, CurrencyLibrary } from \"../lib/Currency.sol\";\n\ncontract TokenRedeemer is ReentrancyGuard, Ownable2Step {\n    using CurrencyLibrary for Currency;\n\n    struct Repayment {\n        address borrower;\n        uint256 amount;\n    }\n\n    IVBNB public immutable VBNB;\n\n    error AccrueInterestFailed(uint256 errCode);\n    error RedeemFailed(uint256 errCode);\n    error RepaymentFailed(uint256 errCode);\n    error NativeTokenTransferFailed();\n\n    constructor(address owner_, IVBNB vBNB) {\n        ensureNonzeroAddress(owner_);\n        VBNB = vBNB;\n        _transferOwnership(owner_);\n    }\n\n    receive() external payable {}\n\n    function redeemAndTransfer(IVToken vToken, address destination) external nonReentrant onlyOwner {\n        Currency underlying = _underlying(vToken);\n        uint256 err = vToken.redeem(vToken.balanceOf(address(this)));\n        if (err != 0) {\n            revert RedeemFailed(err);\n        }\n        underlying.transferAll(destination);\n    }\n\n    function redeemUnderlyingAndTransfer(\n        IVToken vToken,\n        address destination,\n        uint256 amount,\n        address receiver\n    ) external nonReentrant onlyOwner {\n        Currency underlying = _underlying(vToken);\n        underlying.transferAll(receiver); // Just in case there were some underlying tokens on the contract\n        uint256 err = vToken.redeemUnderlying(amount);\n        if (err != 0) {\n            revert RedeemFailed(err);\n        }\n        underlying.transferAll(destination);\n        Currency.wrap(address(vToken)).transferAll(receiver);\n    }\n\n    function redeemUnderlyingAndRepayBorrowBehalf(\n        IVToken vToken,\n        address borrower,\n        uint256 amount,\n        address receiver\n    ) external nonReentrant onlyOwner {\n        Currency underlying = _underlying(vToken);\n\n        uint256 err = vToken.redeemUnderlying(amount);\n        if (err != 0) {\n            revert RedeemFailed(err);\n        }\n\n        underlying.approve(address(vToken), amount);\n\n        _repay(vToken, borrower, amount);\n\n        underlying.approve(address(vToken), 0);\n\n        underlying.transferAll(receiver);\n        Currency.wrap(address(vToken)).transferAll(receiver);\n    }\n\n    function redeemAndBatchRepay(\n        IVToken vToken,\n        Repayment[] calldata requestedRepayments,\n        address receiver\n    ) external nonReentrant onlyOwner {\n        _accrueInterest(vToken);\n\n        (uint256 totalBorrowedAmount, Repayment[] memory repayments) = _getAmountsToRepay(vToken, requestedRepayments);\n        _redeemUpTo(vToken, totalBorrowedAmount);\n\n        Currency underlying = _underlying(vToken);\n        uint256 balance = underlying.balanceOfSelf();\n        underlying.approve(address(vToken), totalBorrowedAmount);\n        uint256 repaymentsCount = repayments.length;\n        // The code below assumes no fees on transfer\n        if (balance >= totalBorrowedAmount) {\n            // If we're doing a full repayment, we can optimize it by skipping the balance checks\n            for (uint256 i = 0; i < repaymentsCount; ++i) {\n                Repayment memory repayment = repayments[i];\n                _repay(vToken, repayment.borrower, repayment.amount);\n            }\n        } else {\n            // Otherwise, we have to check and update the balance on every iteration\n            for (uint256 i = 0; i < repaymentsCount && balance != 0; ++i) {\n                Repayment memory repayment = repayments[i];\n                _repay(vToken, repayment.borrower, _min(repayment.amount, balance));\n                balance = underlying.balanceOfSelf();\n            }\n        }\n        underlying.approve(address(vToken), 0);\n\n        underlying.transferAll(receiver);\n        Currency.wrap(address(vToken)).transferAll(receiver);\n    }\n\n    function batchRepayVAI(\n        IVAIController vaiController,\n        Repayment[] calldata requestedRepayments,\n        address receiver\n    ) external nonReentrant onlyOwner {\n        vaiController.accrueVAIInterest();\n        Currency vai = Currency.wrap(vaiController.getVAIAddress());\n        uint256 balance = vai.balanceOfSelf();\n        vai.approve(address(vaiController), type(uint256).max);\n        uint256 repaymentsCount = requestedRepayments.length;\n        for (uint256 i = 0; i < repaymentsCount && balance != 0; ++i) {\n            Repayment calldata requestedRepayment = requestedRepayments[i];\n            uint256 repaymentCap = requestedRepayment.amount;\n            uint256 debt = vaiController.getVAIRepayAmount(requestedRepayment.borrower);\n            uint256 amount = _min(repaymentCap, debt);\n            _repayVAI(vaiController, requestedRepayment.borrower, _min(amount, balance));\n            balance = vai.balanceOfSelf();\n        }\n        vai.approve(address(vaiController), 0);\n        vai.transferAll(receiver);\n    }\n\n    function sweepTokens(address token, address destination) external onlyOwner {\n        Currency.wrap(token).transferAll(destination);\n    }\n\n    function _accrueInterest(IVToken vToken) internal {\n        uint256 err = vToken.accrueInterest();\n        if (err != 0) {\n            revert AccrueInterestFailed(err);\n        }\n    }\n\n    function _redeemUpTo(IVToken vToken, uint256 amount) internal {\n        uint256 unredeemedUnderlying = vToken.balanceOfUnderlying(address(this));\n        if (unredeemedUnderlying > 0) {\n            uint256 err = vToken.redeemUnderlying(_min(amount, unredeemedUnderlying));\n            if (err != 0) {\n                revert RedeemFailed(err);\n            }\n        }\n    }\n\n    function _repay(IVToken vToken, address borrower, uint256 amount) internal {\n        if (amount == 0) {\n            return;\n        }\n        if (_isVBNB(vToken)) {\n            IVBNB(address(vToken)).repayBorrowBehalf{ value: amount }(borrower);\n        } else {\n            uint256 err = IVBep20(address(vToken)).repayBorrowBehalf(borrower, amount);\n            if (err != 0) {\n                revert RepaymentFailed(err);\n            }\n        }\n    }\n\n    function _repayVAI(IVAIController vaiController, address borrower, uint256 amount) internal {\n        if (amount == 0) {\n            return;\n        }\n        (uint256 err, ) = vaiController.repayVAIBehalf(borrower, amount);\n        if (err != 0) {\n            revert RepaymentFailed(err);\n        }\n    }\n\n    function _getAmountsToRepay(\n        IVToken vToken,\n        Repayment[] calldata requestedRepayments\n    ) internal view returns (uint256, Repayment[] memory) {\n        uint256 repaymentsCount = requestedRepayments.length;\n        Repayment[] memory actualRepayments = new Repayment[](repaymentsCount);\n        uint256 totalAmountToRepay = 0;\n        for (uint256 i = 0; i < repaymentsCount; ++i) {\n            Repayment calldata requestedRepayment = requestedRepayments[i];\n            uint256 repaymentCap = requestedRepayment.amount;\n            uint256 debt = vToken.borrowBalanceStored(requestedRepayment.borrower);\n            uint256 amountToRepay = _min(repaymentCap, debt);\n            totalAmountToRepay += amountToRepay;\n            actualRepayments[i] = Repayment({ borrower: requestedRepayment.borrower, amount: amountToRepay });\n        }\n        return (totalAmountToRepay, actualRepayments);\n    }\n\n    function _underlying(IVToken vToken) internal view returns (Currency) {\n        if (_isVBNB(vToken)) {\n            return CurrencyLibrary.NATIVE;\n        }\n        return Currency.wrap(IVBep20(address(vToken)).underlying());\n    }\n\n    function _isVBNB(IVToken vToken) internal view returns (bool) {\n        return address(vToken) == address(VBNB);\n    }\n\n    function _min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n}\n"
     },
     "contracts/Governance/VTreasuryV8.sol": {
       "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport { SafeERC20, IERC20 } from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport { Ownable2Step } from \"@openzeppelin/contracts/access/Ownable2Step.sol\";\nimport { ReentrancyGuard } from \"@openzeppelin/contracts/security/ReentrancyGuard.sol\";\n\n/**\n * @title VTreasuryV8\n * @author Venus\n * @notice Protocol treasury that holds tokens owned by Venus\n */\ncontract VTreasuryV8 is Ownable2Step, ReentrancyGuard {\n    using SafeERC20 for IERC20;\n\n    // WithdrawTreasuryToken Event\n    event WithdrawTreasuryToken(address indexed tokenAddress, uint256 withdrawAmount, address indexed withdrawAddress);\n\n    // WithdrawTreasuryNative Event\n    event WithdrawTreasuryNative(uint256 withdrawAmount, address indexed withdrawAddress);\n\n    /// @notice Thrown if the supplied address is a zero address where it is not allowed\n    error ZeroAddressNotAllowed();\n\n    /**\n     * @notice To receive Native when msg.data is not empty\n     */\n    fallback() external payable {}\n\n    /**\n     * @notice To receive Native when msg.data is empty\n     */\n    receive() external payable {}\n\n    /**\n     * @notice Withdraw Treasury  Tokens, Only owner call it\n     * @param tokenAddress The address of treasury token\n     * @param withdrawAmount The withdraw amount to owner\n     * @param withdrawAddress The withdraw address\n     * @custom:error ZeroAddressNotAllowed thrown when token or withdrawAddress is zero.\n     */\n    function withdrawTreasuryToken(\n        address tokenAddress,\n        uint256 withdrawAmount,\n        address withdrawAddress\n    ) external onlyOwner nonReentrant {\n        ensureNonzeroAddress(tokenAddress);\n        ensureNonzeroAddress(withdrawAddress);\n        require(withdrawAmount > 0, \"withdrawAmount must not be zero\");\n\n        uint256 actualWithdrawAmount = withdrawAmount;\n        // Get Treasury Token Balance\n        uint256 treasuryBalance = IERC20(tokenAddress).balanceOf(address(this));\n\n        // Check Withdraw Amount\n        if (withdrawAmount > treasuryBalance) {\n            // Update actualWithdrawAmount\n            actualWithdrawAmount = treasuryBalance;\n        }\n\n        // Transfer Token to withdrawAddress\n        IERC20(tokenAddress).safeTransfer(withdrawAddress, actualWithdrawAmount);\n\n        emit WithdrawTreasuryToken(tokenAddress, actualWithdrawAmount, withdrawAddress);\n    }\n\n    /**\n     * @notice Withdraw Treasury Native, Only owner call it\n     * @param withdrawAmount The withdraw amount to owner\n     * @param withdrawAddress The withdraw address\n     * @custom:error ZeroAddressNotAllowed thrown when withdrawAddress is zero.\n     */\n    function withdrawTreasuryNative(\n        uint256 withdrawAmount,\n        address payable withdrawAddress\n    ) external payable onlyOwner nonReentrant {\n        ensureNonzeroAddress(withdrawAddress);\n        require(withdrawAmount > 0, \"withdrawAmount must not be zero\");\n        uint256 actualWithdrawAmount = withdrawAmount;\n        // Get Treasury Native Balance\n        uint256 nativeBalance = address(this).balance;\n\n        // Check Withdraw Amount\n        if (withdrawAmount > nativeBalance) {\n            // Update actualWithdrawAmount\n            actualWithdrawAmount = nativeBalance;\n        }\n        // Transfer the native token to withdrawAddress\n        (bool sent, ) = withdrawAddress.call{ value: actualWithdrawAmount }(\"\");\n        require(sent, \"Call failed\");\n        emit WithdrawTreasuryNative(actualWithdrawAmount, withdrawAddress);\n    }\n\n    /// @notice Checks if the provided address is nonzero, reverts otherwise\n    /// @param address_ Address to check\n    /// @custom:error ZeroAddressNotAllowed is thrown if the provided address is a zero address\n    function ensureNonzeroAddress(address address_) internal pure {\n        if (address_ == address(0)) {\n            revert ZeroAddressNotAllowed();\n        }\n    }\n}\n"
     },
+    "contracts/hardhat-dependency-compiler/hardhat-deploy/solc_0.8/openzeppelin/proxy/transparent/ProxyAdmin.sol": {
+      "content": "// SPDX-License-Identifier: UNLICENSED\npragma solidity >0.0.0;\nimport 'hardhat-deploy/solc_0.8/openzeppelin/proxy/transparent/ProxyAdmin.sol';\n"
+    },
+    "contracts/hardhat-dependency-compiler/hardhat-deploy/solc_0.8/proxy/OptimizedTransparentUpgradeableProxy.sol": {
+      "content": "// SPDX-License-Identifier: UNLICENSED\npragma solidity >0.0.0;\nimport 'hardhat-deploy/solc_0.8/proxy/OptimizedTransparentUpgradeableProxy.sol';\n"
+    },
+    "contracts/InterestRateModels/InterestRateModelV8.sol": {
+      "content": "pragma solidity 0.8.25;\n\n/**\n * @title Venus's InterestRateModelV8 Interface\n * @author Venus\n */\nabstract contract InterestRateModelV8 {\n    /// @notice Indicator that this is an InterestRateModel contract (for inspection)\n    bool public constant isInterestRateModel = true;\n\n    /**\n     * @notice Calculates the current borrow interest rate per block\n     * @param cash The total amount of cash the market has\n     * @param borrows The total amount of borrows the market has outstanding\n     * @param reserves The total amnount of reserves the market has\n     * @return The borrow rate per block (as a percentage, and scaled by 1e18)\n     */\n    function getBorrowRate(uint256 cash, uint256 borrows, uint256 reserves) external view virtual returns (uint256);\n\n    /**\n     * @notice Calculates the current supply interest rate per block\n     * @param cash The total amount of cash the market has\n     * @param borrows The total amount of borrows the market has outstanding\n     * @param reserves The total amnount of reserves the market has\n     * @param reserveFactorMantissa The current reserve factor the market has\n     * @return The supply rate per block (as a percentage, and scaled by 1e18)\n     */\n    function getSupplyRate(\n        uint256 cash,\n        uint256 borrows,\n        uint256 reserves,\n        uint256 reserveFactorMantissa\n    ) external view virtual returns (uint256);\n}\n"
+    },
+    "contracts/InterestRateModels/TwoKinksInterestRateModel.sol": {
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport { InterestRateModelV8 } from \"./InterestRateModelV8.sol\";\n\n/**\n * @title TwoKinksInterestRateModel\n * @author Venus\n * @notice An interest rate model with two different slope increase or decrease each after a certain utilization threshold called **kink** is reached.\n */\ncontract TwoKinksInterestRateModel is InterestRateModelV8 {\n    int256 public constant BLOCKS_PER_YEAR = (60 * 60 * 24 * 365) / 3; // (assuming 3s blocks)\n\n    ////////////////////// SLOPE 1 //////////////////////\n\n    /**\n     * @notice The multiplier of utilization rate per block that gives the slope 1 of the interest rate scaled by EXP_SCALE\n     */\n    int256 public immutable MULTIPLIER_PER_BLOCK;\n\n    /**\n     * @notice The base interest rate per block which is the y-intercept when utilization rate is 0 scaled by EXP_SCALE\n     */\n    int256 public immutable BASE_RATE_PER_BLOCK;\n\n    ////////////////////// SLOPE 2 //////////////////////\n\n    /**\n     * @notice The utilization point at which the multiplier2 is applied\n     */\n    int256 public immutable KINK_1;\n\n    /**\n     * @notice The multiplier of utilization rate per block that gives the slope 2 of the interest rate scaled by EXP_SCALE\n     */\n    int256 public immutable MULTIPLIER_2_PER_BLOCK;\n\n    /**\n     * @notice The base interest rate per block which is the y-intercept when utilization rate hits KINK_1 scaled by EXP_SCALE\n     */\n    int256 public immutable BASE_RATE_2_PER_BLOCK;\n\n    /**\n     * @notice The maximum kink interest rate scaled by EXP_SCALE\n     */\n    int256 public immutable RATE_1;\n\n    ////////////////////// SLOPE 3 //////////////////////\n\n    /**\n     * @notice The utilization point at which the jump multiplier is applied\n     */\n    int256 public immutable KINK_2;\n\n    /**\n     * @notice The multiplier of utilization rate per block that gives the slope 3 of interest rate scaled by EXP_SCALE\n     */\n    int256 public immutable JUMP_MULTIPLIER_PER_BLOCK;\n\n    /**\n     * @notice The maximum kink interest rate scaled by EXP_SCALE\n     */\n    int256 public immutable RATE_2;\n\n    /// @notice Base unit for computations, usually used in scaling (multiplications, divisions)\n    uint256 internal constant EXP_SCALE = 1e18;\n\n    /**\n     * @notice Thrown when a negative value is not allowed\n     */\n    error NegativeValueNotAllowed();\n\n    /**\n     * @notice Thrown when the kink points are not in the correct order\n     */\n    error InvalidKink();\n\n    /**\n     * @notice Construct an interest rate model\n     * @param baseRatePerYear_ The approximate target base APR, as a mantissa (scaled by EXP_SCALE)\n     * @param multiplierPerYear_ The rate of increase or decrease in interest rate wrt utilization (scaled by EXP_SCALE)\n     * @param kink1_ The utilization point at which the multiplier2 is applied\n     * @param multiplier2PerYear_ The rate of increase or decrease in interest rate wrt utilization after hitting KINK_1 (scaled by EXP_SCALE)\n     * @param baseRate2PerYear_ The additional base APR after hitting KINK_1, as a mantissa (scaled by EXP_SCALE)\n     * @param kink2_ The utilization point at which the jump multiplier is applied\n     * @param jumpMultiplierPerYear_ The multiplier after hitting KINK_2\n     */\n    constructor(\n        int256 baseRatePerYear_,\n        int256 multiplierPerYear_,\n        int256 kink1_,\n        int256 multiplier2PerYear_,\n        int256 baseRate2PerYear_,\n        int256 kink2_,\n        int256 jumpMultiplierPerYear_\n    ) {\n        if (baseRatePerYear_ < 0 || baseRate2PerYear_ < 0) {\n            revert NegativeValueNotAllowed();\n        }\n\n        if (kink2_ <= kink1_ || kink1_ <= 0) {\n            revert InvalidKink();\n        }\n\n        BASE_RATE_PER_BLOCK = baseRatePerYear_ / BLOCKS_PER_YEAR;\n        MULTIPLIER_PER_BLOCK = multiplierPerYear_ / BLOCKS_PER_YEAR;\n        KINK_1 = kink1_;\n        MULTIPLIER_2_PER_BLOCK = multiplier2PerYear_ / BLOCKS_PER_YEAR;\n        BASE_RATE_2_PER_BLOCK = baseRate2PerYear_ / BLOCKS_PER_YEAR;\n        KINK_2 = kink2_;\n        JUMP_MULTIPLIER_PER_BLOCK = jumpMultiplierPerYear_ / BLOCKS_PER_YEAR;\n\n        int256 expScale = int256(EXP_SCALE);\n        RATE_1 = (((KINK_1 * MULTIPLIER_PER_BLOCK) / expScale) + BASE_RATE_PER_BLOCK);\n\n        int256 slope2Util;\n        unchecked {\n            slope2Util = KINK_2 - KINK_1;\n        }\n        RATE_2 = ((slope2Util * MULTIPLIER_2_PER_BLOCK) / expScale) + BASE_RATE_2_PER_BLOCK;\n    }\n\n    /**\n     * @notice Calculates the current borrow rate per slot (block)\n     * @param cash The amount of cash in the market\n     * @param borrows The amount of borrows in the market\n     * @param reserves The amount of reserves in the market\n     * @return The borrow rate percentage per slot (block) as a mantissa (scaled by EXP_SCALE)\n     */\n    function getBorrowRate(uint256 cash, uint256 borrows, uint256 reserves) external view override returns (uint256) {\n        return _getBorrowRate(cash, borrows, reserves);\n    }\n\n    /**\n     * @notice Calculates the current supply rate per slot (block)\n     * @param cash The amount of cash in the market\n     * @param borrows The amount of borrows in the market\n     * @param reserves The amount of reserves in the market\n     * @param reserveFactorMantissa The current reserve factor for the market\n     * @return The supply rate percentage per slot (block) as a mantissa (scaled by EXP_SCALE)\n     */\n    function getSupplyRate(\n        uint256 cash,\n        uint256 borrows,\n        uint256 reserves,\n        uint256 reserveFactorMantissa\n    ) public view virtual override returns (uint256) {\n        uint256 oneMinusReserveFactor = EXP_SCALE - reserveFactorMantissa;\n        uint256 borrowRate = _getBorrowRate(cash, borrows, reserves);\n        uint256 rateToPool = (borrowRate * oneMinusReserveFactor) / EXP_SCALE;\n        return (utilizationRate(cash, borrows, reserves) * rateToPool) / EXP_SCALE;\n    }\n\n    /**\n     * @notice Calculates the utilization rate of the market: `borrows / (cash + borrows - reserves)`\n     * @param cash The amount of cash in the market\n     * @param borrows The amount of borrows in the market\n     * @param reserves The amount of reserves in the market\n     * @return The utilization rate as a mantissa between [0, EXP_SCALE]\n     */\n    function utilizationRate(uint256 cash, uint256 borrows, uint256 reserves) public pure returns (uint256) {\n        // Utilization rate is 0 when there are no borrows\n        if (borrows == 0) {\n            return 0;\n        }\n\n        uint256 rate = (borrows * EXP_SCALE) / (cash + borrows - reserves);\n\n        if (rate > EXP_SCALE) {\n            rate = EXP_SCALE;\n        }\n\n        return rate;\n    }\n\n    /**\n     * @notice Calculates the current borrow rate per slot (block), with the error code expected by the market\n     * @param cash The amount of cash in the market\n     * @param borrows The amount of borrows in the market\n     * @param reserves The amount of reserves in the market\n     * @return The borrow rate percentage per slot (block) as a mantissa (scaled by EXP_SCALE)\n     */\n    function _getBorrowRate(uint256 cash, uint256 borrows, uint256 reserves) internal view returns (uint256) {\n        int256 util = int256(utilizationRate(cash, borrows, reserves));\n        int256 expScale = int256(EXP_SCALE);\n\n        if (util < KINK_1) {\n            return _minCap(((util * MULTIPLIER_PER_BLOCK) / expScale) + BASE_RATE_PER_BLOCK);\n        } else if (util < KINK_2) {\n            int256 slope2Util;\n            unchecked {\n                slope2Util = util - KINK_1;\n            }\n            int256 rate2 = ((slope2Util * MULTIPLIER_2_PER_BLOCK) / expScale) + BASE_RATE_2_PER_BLOCK;\n\n            return _minCap(RATE_1 + rate2);\n        } else {\n            int256 slope3Util;\n            unchecked {\n                slope3Util = util - KINK_2;\n            }\n            int256 rate3 = ((slope3Util * JUMP_MULTIPLIER_PER_BLOCK) / expScale);\n\n            return _minCap(RATE_1 + RATE_2 + rate3);\n        }\n    }\n\n    /**\n     * @notice Returns 0 if number is less than 0, otherwise returns the input\n     * @param number The first number\n     * @return The maximum of 0 and input number\n     */\n    function _minCap(int256 number) internal pure returns (uint256) {\n        int256 zero;\n        return uint256(number > zero ? number : zero);\n    }\n}\n"
+    },
     "contracts/InterfacesV8.sol": {
-      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity ^0.8.25;\n\nimport { IERC20Upgradeable } from \"@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol\";\nimport { ResilientOracleInterface } from \"@venusprotocol/oracle/contracts/interfaces/OracleInterface.sol\";\n\ninterface IVToken is IERC20Upgradeable {\n    function accrueInterest() external returns (uint256);\n\n    function redeem(uint256 redeemTokens) external returns (uint256);\n\n    function redeemUnderlying(uint256 redeemAmount) external returns (uint256);\n\n    function borrowBalanceCurrent(address borrower) external returns (uint256);\n\n    function balanceOfUnderlying(address owner) external returns (uint256);\n\n    function comptroller() external view returns (IComptroller);\n\n    function borrowBalanceStored(address account) external view returns (uint256);\n}\n\ninterface IVBep20 is IVToken {\n    function borrowBehalf(address borrower, uint256 borrowAmount) external returns (uint256);\n\n    function repayBorrowBehalf(address borrower, uint256 repayAmount) external returns (uint256);\n\n    function liquidateBorrow(\n        address borrower,\n        uint256 repayAmount,\n        IVToken vTokenCollateral\n    ) external returns (uint256);\n\n    function underlying() external view returns (address);\n}\n\ninterface IVBNB is IVToken {\n    function repayBorrowBehalf(address borrower) external payable;\n\n    function liquidateBorrow(address borrower, IVToken vTokenCollateral) external payable;\n}\n\ninterface IVAIController {\n    function liquidateVAI(\n        address borrower,\n        uint256 repayAmount,\n        IVToken vTokenCollateral\n    ) external returns (uint256, uint256);\n\n    function getVAIAddress() external view returns (address);\n\n    function getVAIRepayAmount(address borrower) external view returns (uint256);\n}\n\ninterface IComptroller {\n    enum Action {\n        MINT,\n        REDEEM,\n        BORROW,\n        REPAY,\n        SEIZE,\n        LIQUIDATE,\n        TRANSFER,\n        ENTER_MARKET,\n        EXIT_MARKET\n    }\n\n    function _setActionsPaused(address[] calldata markets_, Action[] calldata actions_, bool paused_) external;\n\n    function liquidationIncentiveMantissa() external view returns (uint256);\n\n    function vaiController() external view returns (IVAIController);\n\n    function liquidatorContract() external view returns (address);\n\n    function oracle() external view returns (ResilientOracleInterface);\n\n    function actionPaused(address market, Action action) external view returns (bool);\n\n    function markets(address) external view returns (bool, uint256, bool);\n\n    function isForcedLiquidationEnabled(address) external view returns (bool);\n}\n\ninterface ILiquidator {\n    function restrictLiquidation(address borrower) external;\n\n    function unrestrictLiquidation(address borrower) external;\n\n    function addToAllowlist(address borrower, address liquidator) external;\n\n    function removeFromAllowlist(address borrower, address liquidator) external;\n\n    function liquidateBorrow(\n        address vToken,\n        address borrower,\n        uint256 repayAmount,\n        IVToken vTokenCollateral\n    ) external payable;\n\n    function setTreasuryPercent(uint256 newTreasuryPercentMantissa) external;\n\n    function treasuryPercentMantissa() external view returns (uint256);\n}\n\ninterface IProtocolShareReserve {\n    enum IncomeType {\n        SPREAD,\n        LIQUIDATION\n    }\n\n    function updateAssetsState(address comptroller, address asset, IncomeType kind) external;\n}\n\ninterface IWBNB is IERC20Upgradeable {\n    function deposit() external payable;\n}\n"
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity ^0.8.25;\n\nimport { IERC20Upgradeable } from \"@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol\";\nimport { ResilientOracleInterface } from \"@venusprotocol/oracle/contracts/interfaces/OracleInterface.sol\";\n\ninterface IVToken is IERC20Upgradeable {\n    function accrueInterest() external returns (uint256);\n\n    function redeem(uint256 redeemTokens) external returns (uint256);\n\n    function redeemUnderlying(uint256 redeemAmount) external returns (uint256);\n\n    function borrowBalanceCurrent(address borrower) external returns (uint256);\n\n    function balanceOfUnderlying(address owner) external returns (uint256);\n\n    function comptroller() external view returns (IComptroller);\n\n    function borrowBalanceStored(address account) external view returns (uint256);\n}\n\ninterface IVBep20 is IVToken {\n    function borrowBehalf(address borrower, uint256 borrowAmount) external returns (uint256);\n\n    function repayBorrowBehalf(address borrower, uint256 repayAmount) external returns (uint256);\n\n    function liquidateBorrow(\n        address borrower,\n        uint256 repayAmount,\n        IVToken vTokenCollateral\n    ) external returns (uint256);\n\n    function underlying() external view returns (address);\n}\n\ninterface IVBNB is IVToken {\n    function repayBorrowBehalf(address borrower) external payable;\n\n    function liquidateBorrow(address borrower, IVToken vTokenCollateral) external payable;\n}\n\ninterface IVAIController {\n    function accrueVAIInterest() external;\n\n    function liquidateVAI(\n        address borrower,\n        uint256 repayAmount,\n        IVToken vTokenCollateral\n    ) external returns (uint256, uint256);\n\n    function repayVAIBehalf(address borrower, uint256 amount) external returns (uint256, uint256);\n\n    function getVAIAddress() external view returns (address);\n\n    function getVAIRepayAmount(address borrower) external view returns (uint256);\n}\n\ninterface IComptroller {\n    enum Action {\n        MINT,\n        REDEEM,\n        BORROW,\n        REPAY,\n        SEIZE,\n        LIQUIDATE,\n        TRANSFER,\n        ENTER_MARKET,\n        EXIT_MARKET\n    }\n\n    function _setActionsPaused(address[] calldata markets_, Action[] calldata actions_, bool paused_) external;\n\n    function liquidationIncentiveMantissa() external view returns (uint256);\n\n    function vaiController() external view returns (IVAIController);\n\n    function liquidatorContract() external view returns (address);\n\n    function oracle() external view returns (ResilientOracleInterface);\n\n    function actionPaused(address market, Action action) external view returns (bool);\n\n    function markets(address) external view returns (bool, uint256, bool);\n\n    function isForcedLiquidationEnabled(address) external view returns (bool);\n}\n\ninterface ILiquidator {\n    function restrictLiquidation(address borrower) external;\n\n    function unrestrictLiquidation(address borrower) external;\n\n    function addToAllowlist(address borrower, address liquidator) external;\n\n    function removeFromAllowlist(address borrower, address liquidator) external;\n\n    function liquidateBorrow(\n        address vToken,\n        address borrower,\n        uint256 repayAmount,\n        IVToken vTokenCollateral\n    ) external payable;\n\n    function setTreasuryPercent(uint256 newTreasuryPercentMantissa) external;\n\n    function treasuryPercentMantissa() external view returns (uint256);\n}\n\ninterface IProtocolShareReserve {\n    enum IncomeType {\n        SPREAD,\n        LIQUIDATION\n    }\n\n    function updateAssetsState(address comptroller, address asset, IncomeType kind) external;\n}\n\ninterface IWBNB is IERC20Upgradeable {\n    function deposit() external payable;\n}\n"
     },
     "contracts/lib/approveOrRevert.sol": {
       "content": "// SPDX-License-Identifier: MIT\npragma solidity 0.8.25;\n\nimport { IERC20Upgradeable } from \"@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol\";\n\n/// @notice Thrown if a contract is unable to approve a transfer\nerror ApproveFailed();\n\n/// @notice Approves a transfer, ensuring that it is successful. This function supports non-compliant\n/// tokens like the ones that don't return a boolean value on success. Thus, such approve call supports\n/// three different kinds of tokens:\n///   * Compliant tokens that revert on failure\n///   * Compliant tokens that return false on failure\n///   * Non-compliant tokens that don't return a value\n/// @param token The contract address of the token which will be transferred\n/// @param spender The spender contract address\n/// @param amount The value of the transfer\nfunction approveOrRevert(IERC20Upgradeable token, address spender, uint256 amount) {\n    bytes memory callData = abi.encodeCall(token.approve, (spender, amount));\n\n    // solhint-disable-next-line avoid-low-level-calls\n    (bool success, bytes memory result) = address(token).call(callData);\n\n    if (!success || (result.length != 0 && !abi.decode(result, (bool)))) {\n        revert ApproveFailed();\n    }\n}\n"
@@ -252,6 +264,42 @@
     },
     "contracts/Tokens/Prime/PrimeStorage.sol": {
       "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport { ResilientOracleInterface } from \"@venusprotocol/oracle/contracts/interfaces/OracleInterface.sol\";\n\n/**\n * @title PrimeStorageV1\n * @author Venus\n * @notice Storage for Prime Token\n */\ncontract PrimeStorageV1 {\n    struct Token {\n        bool exists;\n        bool isIrrevocable;\n    }\n\n    struct Market {\n        uint256 supplyMultiplier;\n        uint256 borrowMultiplier;\n        uint256 rewardIndex;\n        uint256 sumOfMembersScore;\n        bool exists;\n    }\n\n    struct Interest {\n        uint256 accrued;\n        uint256 score;\n        uint256 rewardIndex;\n    }\n\n    struct PendingReward {\n        address vToken;\n        address rewardToken;\n        uint256 amount;\n    }\n\n    /// @notice Base unit for computations, usually used in scaling (multiplications, divisions)\n    uint256 internal constant EXP_SCALE = 1e18;\n\n    /// @notice maximum BPS = 100%\n    uint256 internal constant MAXIMUM_BPS = 1e4;\n\n    /// @notice Mapping to get prime token's metadata\n    mapping(address => Token) public tokens;\n\n    /// @notice  Tracks total irrevocable tokens minted\n    uint256 public totalIrrevocable;\n\n    /// @notice  Tracks total revocable tokens minted\n    uint256 public totalRevocable;\n\n    /// @notice  Indicates maximum revocable tokens that can be minted\n    uint256 public revocableLimit;\n\n    /// @notice  Indicates maximum irrevocable tokens that can be minted\n    uint256 public irrevocableLimit;\n\n    /// @notice Tracks when prime token eligible users started staking for claiming prime token\n    mapping(address => uint256) public stakedAt;\n\n    /// @notice vToken to market configuration\n    mapping(address => Market) public markets;\n\n    /// @notice vToken to user to user index\n    mapping(address => mapping(address => Interest)) public interests;\n\n    /// @notice A list of boosted markets\n    address[] internal _allMarkets;\n\n    /// @notice numerator of alpha. Ex: if alpha is 0.5 then this will be 1\n    uint128 public alphaNumerator;\n\n    /// @notice denominator of alpha. Ex: if alpha is 0.5 then this will be 2\n    uint128 public alphaDenominator;\n\n    /// @notice address of XVS vault\n    address public xvsVault;\n\n    /// @notice address of XVS vault reward token\n    address public xvsVaultRewardToken;\n\n    /// @notice address of XVS vault pool id\n    uint256 public xvsVaultPoolId;\n\n    /// @notice mapping to check if a account's score was updated in the round\n    mapping(uint256 => mapping(address => bool)) public isScoreUpdated;\n\n    /// @notice unique id for next round\n    uint256 public nextScoreUpdateRoundId;\n\n    /// @notice total number of accounts whose score needs to be updated\n    uint256 public totalScoreUpdatesRequired;\n\n    /// @notice total number of accounts whose score is yet to be updated\n    uint256 public pendingScoreUpdates;\n\n    /// @notice mapping used to find if an asset is part of prime markets\n    mapping(address => address) public vTokenForAsset;\n\n    /// @notice Address of core pool comptroller contract\n    address internal corePoolComptroller;\n\n    /// @notice unreleased income from PLP that's already distributed to prime holders\n    /// @dev mapping of asset address => amount\n    mapping(address => uint256) public unreleasedPLPIncome;\n\n    /// @notice The address of PLP contract\n    address public primeLiquidityProvider;\n\n    /// @notice The address of ResilientOracle contract\n    ResilientOracleInterface public oracle;\n\n    /// @notice The address of PoolRegistry contract\n    address public poolRegistry;\n\n    /// @dev This empty reserved space is put in place to allow future versions to add new\n    /// variables without shifting down storage in the inheritance chain.\n    uint256[26] private __gap;\n}\n"
+    },
+    "hardhat-deploy/solc_0.8/openzeppelin/access/Ownable.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the deployer as the initial owner.\n     */\n    constructor (address initialOwner) {\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n        _;\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions anymore. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby removing any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n"
+    },
+    "hardhat-deploy/solc_0.8/openzeppelin/interfaces/draft-IERC1822.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0-rc.0) (interfaces/draft-IERC1822.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified\n * proxy whose upgrades are fully controlled by the current implementation.\n */\ninterface IERC1822Proxiable {\n    /**\n     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation\n     * address.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy.\n     */\n    function proxiableUUID() external view returns (bytes32);\n}\n"
+    },
+    "hardhat-deploy/solc_0.8/openzeppelin/proxy/beacon/IBeacon.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev This is the interface that {BeaconProxy} expects of its beacon.\n */\ninterface IBeacon {\n    /**\n     * @dev Must return an address that can be used as a delegate call target.\n     *\n     * {BeaconProxy} will check that this address is a contract.\n     */\n    function implementation() external view returns (address);\n}\n"
+    },
+    "hardhat-deploy/solc_0.8/openzeppelin/proxy/ERC1967/ERC1967Proxy.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (proxy/ERC1967/ERC1967Proxy.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../Proxy.sol\";\nimport \"./ERC1967Upgrade.sol\";\n\n/**\n * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an\n * implementation address that can be changed. This address is stored in storage in the location specified by\n * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the\n * implementation behind the proxy.\n */\ncontract ERC1967Proxy is Proxy, ERC1967Upgrade {\n    /**\n     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.\n     *\n     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded\n     * function call, and allows initializating the storage of the proxy like a Solidity constructor.\n     */\n    constructor(address _logic, bytes memory _data) payable {\n        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256(\"eip1967.proxy.implementation\")) - 1));\n        _upgradeToAndCall(_logic, _data, false);\n    }\n\n    /**\n     * @dev Returns the current implementation address.\n     */\n    function _implementation() internal view virtual override returns (address impl) {\n        return ERC1967Upgrade._getImplementation();\n    }\n}\n"
+    },
+    "hardhat-deploy/solc_0.8/openzeppelin/proxy/ERC1967/ERC1967Upgrade.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0-rc.0) (proxy/ERC1967/ERC1967Upgrade.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../beacon/IBeacon.sol\";\nimport \"../../interfaces/draft-IERC1822.sol\";\nimport \"../../utils/Address.sol\";\nimport \"../../utils/StorageSlot.sol\";\n\n/**\n * @dev This abstract contract provides getters and event emitting update functions for\n * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.\n *\n * _Available since v4.1._\n *\n * @custom:oz-upgrades-unsafe-allow delegatecall\n */\nabstract contract ERC1967Upgrade {\n    // This is the keccak-256 hash of \"eip1967.proxy.rollback\" subtracted by 1\n    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;\n\n    /**\n     * @dev Storage slot with the address of the current implementation.\n     * This is the keccak-256 hash of \"eip1967.proxy.implementation\" subtracted by 1, and is\n     * validated in the constructor.\n     */\n    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n\n    /**\n     * @dev Emitted when the implementation is upgraded.\n     */\n    event Upgraded(address indexed implementation);\n\n    /**\n     * @dev Returns the current implementation address.\n     */\n    function _getImplementation() internal view returns (address) {\n        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the EIP1967 implementation slot.\n     */\n    function _setImplementation(address newImplementation) private {\n        require(Address.isContract(newImplementation), \"ERC1967: new implementation is not a contract\");\n        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n    }\n\n    /**\n     * @dev Perform implementation upgrade\n     *\n     * Emits an {Upgraded} event.\n     */\n    function _upgradeTo(address newImplementation) internal {\n        _setImplementation(newImplementation);\n        emit Upgraded(newImplementation);\n    }\n\n    /**\n     * @dev Perform implementation upgrade with additional setup call.\n     *\n     * Emits an {Upgraded} event.\n     */\n    function _upgradeToAndCall(\n        address newImplementation,\n        bytes memory data,\n        bool forceCall\n    ) internal {\n        _upgradeTo(newImplementation);\n        if (data.length > 0 || forceCall) {\n            Address.functionDelegateCall(newImplementation, data);\n        }\n    }\n\n    /**\n     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.\n     *\n     * Emits an {Upgraded} event.\n     */\n    function _upgradeToAndCallUUPS(\n        address newImplementation,\n        bytes memory data,\n        bool forceCall\n    ) internal {\n        // Upgrades from old implementations will perform a rollback test. This test requires the new\n        // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing\n        // this special case will break upgrade paths from old UUPS implementation to new ones.\n        if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {\n            _setImplementation(newImplementation);\n        } else {\n            try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {\n                require(slot == _IMPLEMENTATION_SLOT, \"ERC1967Upgrade: unsupported proxiableUUID\");\n            } catch {\n                revert(\"ERC1967Upgrade: new implementation is not UUPS\");\n            }\n            _upgradeToAndCall(newImplementation, data, forceCall);\n        }\n    }\n\n    /**\n     * @dev Storage slot with the admin of the contract.\n     * This is the keccak-256 hash of \"eip1967.proxy.admin\" subtracted by 1, and is\n     * validated in the constructor.\n     */\n    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;\n\n    /**\n     * @dev Emitted when the admin account has changed.\n     */\n    event AdminChanged(address previousAdmin, address newAdmin);\n\n    /**\n     * @dev Returns the current admin.\n     */\n    function _getAdmin() internal view virtual returns (address) {\n        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the EIP1967 admin slot.\n     */\n    function _setAdmin(address newAdmin) private {\n        require(newAdmin != address(0), \"ERC1967: new admin is the zero address\");\n        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;\n    }\n\n    /**\n     * @dev Changes the admin of the proxy.\n     *\n     * Emits an {AdminChanged} event.\n     */\n    function _changeAdmin(address newAdmin) internal {\n        emit AdminChanged(_getAdmin(), newAdmin);\n        _setAdmin(newAdmin);\n    }\n\n    /**\n     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.\n     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.\n     */\n    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;\n\n    /**\n     * @dev Emitted when the beacon is upgraded.\n     */\n    event BeaconUpgraded(address indexed beacon);\n\n    /**\n     * @dev Returns the current beacon.\n     */\n    function _getBeacon() internal view returns (address) {\n        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new beacon in the EIP1967 beacon slot.\n     */\n    function _setBeacon(address newBeacon) private {\n        require(Address.isContract(newBeacon), \"ERC1967: new beacon is not a contract\");\n        require(Address.isContract(IBeacon(newBeacon).implementation()), \"ERC1967: beacon implementation is not a contract\");\n        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;\n    }\n\n    /**\n     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does\n     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).\n     *\n     * Emits a {BeaconUpgraded} event.\n     */\n    function _upgradeBeaconToAndCall(\n        address newBeacon,\n        bytes memory data,\n        bool forceCall\n    ) internal {\n        _setBeacon(newBeacon);\n        emit BeaconUpgraded(newBeacon);\n        if (data.length > 0 || forceCall) {\n            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);\n        }\n    }\n}\n"
+    },
+    "hardhat-deploy/solc_0.8/openzeppelin/proxy/Proxy.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0-rc.0) (proxy/Proxy.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM\n * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to\n * be specified by overriding the virtual {_implementation} function.\n *\n * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a\n * different contract through the {_delegate} function.\n *\n * The success and return data of the delegated call will be returned back to the caller of the proxy.\n */\nabstract contract Proxy {\n    /**\n     * @dev Delegates the current call to `implementation`.\n     *\n     * This function does not return to its internal call site, it will return directly to the external caller.\n     */\n    function _delegate(address implementation) internal virtual {\n        assembly {\n            // Copy msg.data. We take full control of memory in this inline assembly\n            // block because it will not return to Solidity code. We overwrite the\n            // Solidity scratch pad at memory position 0.\n            calldatacopy(0, 0, calldatasize())\n\n            // Call the implementation.\n            // out and outsize are 0 because we don't know the size yet.\n            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)\n\n            // Copy the returned data.\n            returndatacopy(0, 0, returndatasize())\n\n            switch result\n            // delegatecall returns 0 on error.\n            case 0 {\n                revert(0, returndatasize())\n            }\n            default {\n                return(0, returndatasize())\n            }\n        }\n    }\n\n    /**\n     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function\n     * and {_fallback} should delegate.\n     */\n    function _implementation() internal view virtual returns (address);\n\n    /**\n     * @dev Delegates the current call to the address returned by `_implementation()`.\n     *\n     * This function does not return to its internall call site, it will return directly to the external caller.\n     */\n    function _fallback() internal virtual {\n        _beforeFallback();\n        _delegate(_implementation());\n    }\n\n    /**\n     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other\n     * function in the contract matches the call data.\n     */\n    fallback() external payable virtual {\n        _fallback();\n    }\n\n    /**\n     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data\n     * is empty.\n     */\n    receive() external payable virtual {\n        _fallback();\n    }\n\n    /**\n     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`\n     * call, or as part of the Solidity `fallback` or `receive` functions.\n     *\n     * If overriden should call `super._beforeFallback()`.\n     */\n    function _beforeFallback() internal virtual {}\n}\n"
+    },
+    "hardhat-deploy/solc_0.8/openzeppelin/proxy/transparent/ProxyAdmin.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (proxy/transparent/ProxyAdmin.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./TransparentUpgradeableProxy.sol\";\nimport \"../../access/Ownable.sol\";\n\n/**\n * @dev This is an auxiliary contract meant to be assigned as the admin of a {TransparentUpgradeableProxy}. For an\n * explanation of why you would want to use this see the documentation for {TransparentUpgradeableProxy}.\n */\ncontract ProxyAdmin is Ownable {\n\n    constructor (address initialOwner) Ownable(initialOwner) {}\n\n    /**\n     * @dev Returns the current implementation of `proxy`.\n     *\n     * Requirements:\n     *\n     * - This contract must be the admin of `proxy`.\n     */\n    function getProxyImplementation(TransparentUpgradeableProxy proxy) public view virtual returns (address) {\n        // We need to manually run the static call since the getter cannot be flagged as view\n        // bytes4(keccak256(\"implementation()\")) == 0x5c60da1b\n        (bool success, bytes memory returndata) = address(proxy).staticcall(hex\"5c60da1b\");\n        require(success);\n        return abi.decode(returndata, (address));\n    }\n\n    /**\n     * @dev Returns the current admin of `proxy`.\n     *\n     * Requirements:\n     *\n     * - This contract must be the admin of `proxy`.\n     */\n    function getProxyAdmin(TransparentUpgradeableProxy proxy) public view virtual returns (address) {\n        // We need to manually run the static call since the getter cannot be flagged as view\n        // bytes4(keccak256(\"admin()\")) == 0xf851a440\n        (bool success, bytes memory returndata) = address(proxy).staticcall(hex\"f851a440\");\n        require(success);\n        return abi.decode(returndata, (address));\n    }\n\n    /**\n     * @dev Changes the admin of `proxy` to `newAdmin`.\n     *\n     * Requirements:\n     *\n     * - This contract must be the current admin of `proxy`.\n     */\n    function changeProxyAdmin(TransparentUpgradeableProxy proxy, address newAdmin) public virtual onlyOwner {\n        proxy.changeAdmin(newAdmin);\n    }\n\n    /**\n     * @dev Upgrades `proxy` to `implementation`. See {TransparentUpgradeableProxy-upgradeTo}.\n     *\n     * Requirements:\n     *\n     * - This contract must be the admin of `proxy`.\n     */\n    function upgrade(TransparentUpgradeableProxy proxy, address implementation) public virtual onlyOwner {\n        proxy.upgradeTo(implementation);\n    }\n\n    /**\n     * @dev Upgrades `proxy` to `implementation` and calls a function on the new implementation. See\n     * {TransparentUpgradeableProxy-upgradeToAndCall}.\n     *\n     * Requirements:\n     *\n     * - This contract must be the admin of `proxy`.\n     */\n    function upgradeAndCall(\n        TransparentUpgradeableProxy proxy,\n        address implementation,\n        bytes memory data\n    ) public payable virtual onlyOwner {\n        proxy.upgradeToAndCall{value: msg.value}(implementation, data);\n    }\n}\n"
+    },
+    "hardhat-deploy/solc_0.8/openzeppelin/proxy/transparent/TransparentUpgradeableProxy.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (proxy/transparent/TransparentUpgradeableProxy.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../ERC1967/ERC1967Proxy.sol\";\n\n/**\n * @dev This contract implements a proxy that is upgradeable by an admin.\n *\n * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector\n * clashing], which can potentially be used in an attack, this contract uses the\n * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two\n * things that go hand in hand:\n *\n * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if\n * that call matches one of the admin functions exposed by the proxy itself.\n * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the\n * implementation. If the admin tries to call a function on the implementation it will fail with an error that says\n * \"admin cannot fallback to proxy target\".\n *\n * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing\n * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due\n * to sudden errors when trying to call a function from the proxy implementation.\n *\n * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,\n * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.\n */\ncontract TransparentUpgradeableProxy is ERC1967Proxy {\n    /**\n     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and\n     * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.\n     */\n    constructor(\n        address _logic,\n        address admin_,\n        bytes memory _data\n    ) payable ERC1967Proxy(_logic, _data) {\n        assert(_ADMIN_SLOT == bytes32(uint256(keccak256(\"eip1967.proxy.admin\")) - 1));\n        _changeAdmin(admin_);\n    }\n\n    /**\n     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.\n     */\n    modifier ifAdmin() {\n        if (msg.sender == _getAdmin()) {\n            _;\n        } else {\n            _fallback();\n        }\n    }\n\n    /**\n     * @dev Returns the current admin.\n     *\n     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.\n     *\n     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the\n     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.\n     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`\n     */\n    function admin() external ifAdmin returns (address admin_) {\n        admin_ = _getAdmin();\n    }\n\n    /**\n     * @dev Returns the current implementation.\n     *\n     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.\n     *\n     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the\n     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.\n     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`\n     */\n    function implementation() external ifAdmin returns (address implementation_) {\n        implementation_ = _implementation();\n    }\n\n    /**\n     * @dev Changes the admin of the proxy.\n     *\n     * Emits an {AdminChanged} event.\n     *\n     * NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.\n     */\n    function changeAdmin(address newAdmin) external virtual ifAdmin {\n        _changeAdmin(newAdmin);\n    }\n\n    /**\n     * @dev Upgrade the implementation of the proxy.\n     *\n     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.\n     */\n    function upgradeTo(address newImplementation) external ifAdmin {\n        _upgradeToAndCall(newImplementation, bytes(\"\"), false);\n    }\n\n    /**\n     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified\n     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the\n     * proxied contract.\n     *\n     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.\n     */\n    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {\n        _upgradeToAndCall(newImplementation, data, true);\n    }\n\n    /**\n     * @dev Returns the current admin.\n     */\n    function _admin() internal view virtual returns (address) {\n        return _getAdmin();\n    }\n\n    /**\n     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.\n     */\n    function _beforeFallback() internal virtual override {\n        require(msg.sender != _getAdmin(), \"TransparentUpgradeableProxy: admin cannot fallback to proxy target\");\n        super._beforeFallback();\n    }\n}\n"
+    },
+    "hardhat-deploy/solc_0.8/openzeppelin/utils/Address.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0-rc.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     * ====\n     *\n     * [IMPORTANT]\n     * ====\n     * You shouldn't rely on `isContract` to protect against flash loan attacks!\n     *\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n     * constructor.\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize/address.code.length, which returns 0\n        // for contracts in construction, since the code is only stored at the end\n        // of the constructor execution.\n\n        return account.code.length > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCall(target, data, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(address(this).balance >= value, \"Address: insufficient balance for call\");\n        require(isContract(target), \"Address: call to non-contract\");\n\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        require(isContract(target), \"Address: static call to non-contract\");\n\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(isContract(target), \"Address: delegate call to non-contract\");\n\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n     * revert reason using the provided one.\n     *\n     * _Available since v4.3._\n     */\n    function verifyCallResult(\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal pure returns (bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            // Look for revert reason and bubble it up if present\n            if (returndata.length > 0) {\n                // The easiest way to bubble the revert reason is using memory via assembly\n\n                assembly {\n                    let returndata_size := mload(returndata)\n                    revert(add(32, returndata), returndata_size)\n                }\n            } else {\n                revert(errorMessage);\n            }\n        }\n    }\n}\n"
+    },
+    "hardhat-deploy/solc_0.8/openzeppelin/utils/Context.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n}\n"
+    },
+    "hardhat-deploy/solc_0.8/openzeppelin/utils/StorageSlot.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Library for reading and writing primitive types to specific storage slots.\n *\n * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.\n * This library helps with reading and writing to such slots without the need for inline assembly.\n *\n * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.\n *\n * Example usage to set ERC1967 implementation slot:\n * ```\n * contract ERC1967 {\n *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n *\n *     function _getImplementation() internal view returns (address) {\n *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n *     }\n *\n *     function _setImplementation(address newImplementation) internal {\n *         require(Address.isContract(newImplementation), \"ERC1967: new implementation is not a contract\");\n *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n *     }\n * }\n * ```\n *\n * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._\n */\nlibrary StorageSlot {\n    struct AddressSlot {\n        address value;\n    }\n\n    struct BooleanSlot {\n        bool value;\n    }\n\n    struct Bytes32Slot {\n        bytes32 value;\n    }\n\n    struct Uint256Slot {\n        uint256 value;\n    }\n\n    /**\n     * @dev Returns an `AddressSlot` with member `value` located at `slot`.\n     */\n    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.\n     */\n    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.\n     */\n    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.\n     */\n    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {\n        assembly {\n            r.slot := slot\n        }\n    }\n}\n"
+    },
+    "hardhat-deploy/solc_0.8/proxy/OptimizedTransparentUpgradeableProxy.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (proxy/transparent/TransparentUpgradeableProxy.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../openzeppelin/proxy/ERC1967/ERC1967Proxy.sol\";\n\n/**\n * @dev This contract implements a proxy that is upgradeable by an admin.\n *\n * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector\n * clashing], which can potentially be used in an attack, this contract uses the\n * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two\n * things that go hand in hand:\n *\n * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if\n * that call matches one of the admin functions exposed by the proxy itself.\n * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the\n * implementation. If the admin tries to call a function on the implementation it will fail with an error that says\n * \"admin cannot fallback to proxy target\".\n *\n * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing\n * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due\n * to sudden errors when trying to call a function from the proxy implementation.\n *\n * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,\n * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.\n */\ncontract OptimizedTransparentUpgradeableProxy is ERC1967Proxy {\n    address internal immutable _ADMIN;\n\n    /**\n     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and\n     * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.\n     */\n    constructor(\n        address _logic,\n        address admin_,\n        bytes memory _data\n    ) payable ERC1967Proxy(_logic, _data) {\n        assert(_ADMIN_SLOT == bytes32(uint256(keccak256(\"eip1967.proxy.admin\")) - 1));\n        _ADMIN = admin_;\n\n        // still store it to work with EIP-1967\n        bytes32 slot = _ADMIN_SLOT;\n        // solhint-disable-next-line no-inline-assembly\n        assembly {\n            sstore(slot, admin_)\n        }\n        emit AdminChanged(address(0), admin_);\n    }\n\n    /**\n     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.\n     */\n    modifier ifAdmin() {\n        if (msg.sender == _getAdmin()) {\n            _;\n        } else {\n            _fallback();\n        }\n    }\n\n    /**\n     * @dev Returns the current admin.\n     *\n     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.\n     *\n     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the\n     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.\n     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`\n     */\n    function admin() external ifAdmin returns (address admin_) {\n        admin_ = _getAdmin();\n    }\n\n    /**\n     * @dev Returns the current implementation.\n     *\n     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.\n     *\n     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the\n     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.\n     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`\n     */\n    function implementation() external ifAdmin returns (address implementation_) {\n        implementation_ = _implementation();\n    }\n\n    /**\n     * @dev Upgrade the implementation of the proxy.\n     *\n     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.\n     */\n    function upgradeTo(address newImplementation) external ifAdmin {\n        _upgradeToAndCall(newImplementation, bytes(\"\"), false);\n    }\n\n    /**\n     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified\n     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the\n     * proxied contract.\n     *\n     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.\n     */\n    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {\n        _upgradeToAndCall(newImplementation, data, true);\n    }\n\n    /**\n     * @dev Returns the current admin.\n     */\n    function _admin() internal view virtual returns (address) {\n        return _getAdmin();\n    }\n\n    /**\n     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.\n     */\n    function _beforeFallback() internal virtual override {\n        require(msg.sender != _getAdmin(), \"TransparentUpgradeableProxy: admin cannot fallback to proxy target\");\n        super._beforeFallback();\n    }\n\n    function _getAdmin() internal view virtual override returns (address) {\n        return _ADMIN;\n    }\n}\n"
     }
   },
   "settings": {