@venusprotocol/protocol-reserve 3.5.0-dev.2 → 3.5.0-dev.5

package/deployments/bscmainnet/solcInputs/4ecb15deb1238f70d8fbf1bd9668fa1b.json

@@ -0,0 +1,82 @@
+{
+  "language": "Solidity",
+  "sources": {
+    "@openzeppelin/contracts-upgradeable/access/Ownable2StepUpgradeable.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable2Step.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./OwnableUpgradeable.sol\";\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership} and {acceptOwnership}.\n *\n * This module is used through inheritance. It will make available all functions\n * from parent (Ownable).\n */\nabstract contract Ownable2StepUpgradeable is Initializable, OwnableUpgradeable {\n    function __Ownable2Step_init() internal onlyInitializing {\n        __Ownable_init_unchained();\n    }\n\n    function __Ownable2Step_init_unchained() internal onlyInitializing {\n    }\n    address private _pendingOwner;\n\n    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Returns the address of the pending owner.\n     */\n    function pendingOwner() public view virtual returns (address) {\n        return _pendingOwner;\n    }\n\n    /**\n     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual override onlyOwner {\n        _pendingOwner = newOwner;\n        emit OwnershipTransferStarted(owner(), newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual override {\n        delete _pendingOwner;\n        super._transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev The new owner accepts the ownership transfer.\n     */\n    function acceptOwnership() public virtual {\n        address sender = _msgSender();\n        require(pendingOwner() == sender, \"Ownable2Step: caller is not the new owner\");\n        _transferOwnership(sender);\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"
+    },
+    "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/ContextUpgradeable.sol\";\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {\n    address private _owner;\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the deployer as the initial owner.\n     */\n    function __Ownable_init() internal onlyInitializing {\n        __Ownable_init_unchained();\n    }\n\n    function __Ownable_init_unchained() internal onlyInitializing {\n        _transferOwnership(_msgSender());\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"
+    },
+    "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../../utils/AddressUpgradeable.sol\";\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```solidity\n * contract MyToken is ERC20Upgradeable {\n *     function initialize() initializer public {\n *         __ERC20_init(\"MyToken\", \"MTK\");\n *     }\n * }\n *\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n *     function initializeV2() reinitializer(2) public {\n *         __ERC20Permit_init(\"MyToken\");\n *     }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n *     _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n    /**\n     * @dev Indicates that the contract has been initialized.\n     * @custom:oz-retyped-from bool\n     */\n    uint8 private _initialized;\n\n    /**\n     * @dev Indicates that the contract is in the process of being initialized.\n     */\n    bool private _initializing;\n\n    /**\n     * @dev Triggered when the contract has been initialized or reinitialized.\n     */\n    event Initialized(uint8 version);\n\n    /**\n     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n     * `onlyInitializing` functions can be used to initialize parent contracts.\n     *\n     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a\n     * constructor.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier initializer() {\n        bool isTopLevelCall = !_initializing;\n        require(\n            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),\n            \"Initializable: contract is already initialized\"\n        );\n        _initialized = 1;\n        if (isTopLevelCall) {\n            _initializing = true;\n        }\n        _;\n        if (isTopLevelCall) {\n            _initializing = false;\n            emit Initialized(1);\n        }\n    }\n\n    /**\n     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n     * used to initialize parent contracts.\n     *\n     * A reinitializer may be used after the original initialization step. This is essential to configure modules that\n     * are added through upgrades and that require initialization.\n     *\n     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`\n     * cannot be nested. If one is invoked in the context of another, execution will revert.\n     *\n     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n     * a contract, executing them in the right order is up to the developer or operator.\n     *\n     * WARNING: setting the version to 255 will prevent any future reinitialization.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier reinitializer(uint8 version) {\n        require(!_initializing && _initialized < version, \"Initializable: contract is already initialized\");\n        _initialized = version;\n        _initializing = true;\n        _;\n        _initializing = false;\n        emit Initialized(version);\n    }\n\n    /**\n     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n     * {initializer} and {reinitializer} modifiers, directly or indirectly.\n     */\n    modifier onlyInitializing() {\n        require(_initializing, \"Initializable: contract is not initializing\");\n        _;\n    }\n\n    /**\n     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n     * through proxies.\n     *\n     * Emits an {Initialized} event the first time it is successfully executed.\n     */\n    function _disableInitializers() internal virtual {\n        require(!_initializing, \"Initializable: contract is initializing\");\n        if (_initialized != type(uint8).max) {\n            _initialized = type(uint8).max;\n            emit Initialized(type(uint8).max);\n        }\n    }\n\n    /**\n     * @dev Returns the highest version that has been initialized. See {reinitializer}.\n     */\n    function _getInitializedVersion() internal view returns (uint8) {\n        return _initialized;\n    }\n\n    /**\n     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.\n     */\n    function _isInitializing() internal view returns (bool) {\n        return _initializing;\n    }\n}\n"
+    },
+    "@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)\n\npragma solidity ^0.8.0;\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n */\nabstract contract ReentrancyGuardUpgradeable is Initializable {\n    // Booleans are more expensive than uint256 or any type that takes up a full\n    // word because each write operation emits an extra SLOAD to first read the\n    // slot's contents, replace the bits taken up by the boolean, and then write\n    // back. This is the compiler's defense against contract upgrades and\n    // pointer aliasing, and it cannot be disabled.\n\n    // The values being non-zero value makes deployment a bit more expensive,\n    // but in exchange the refund on every call to nonReentrant will be lower in\n    // amount. Since refunds are capped to a percentage of the total\n    // transaction's gas, it is best to keep them low in cases like this one, to\n    // increase the likelihood of the full refund coming into effect.\n    uint256 private constant _NOT_ENTERED = 1;\n    uint256 private constant _ENTERED = 2;\n\n    uint256 private _status;\n\n    function __ReentrancyGuard_init() internal onlyInitializing {\n        __ReentrancyGuard_init_unchained();\n    }\n\n    function __ReentrancyGuard_init_unchained() internal onlyInitializing {\n        _status = _NOT_ENTERED;\n    }\n\n    /**\n     * @dev Prevents a contract from calling itself, directly or indirectly.\n     * Calling a `nonReentrant` function from another `nonReentrant`\n     * function is not supported. It is possible to prevent this from happening\n     * by making the `nonReentrant` function external, and making it call a\n     * `private` function that does the actual work.\n     */\n    modifier nonReentrant() {\n        _nonReentrantBefore();\n        _;\n        _nonReentrantAfter();\n    }\n\n    function _nonReentrantBefore() private {\n        // On the first call to nonReentrant, _status will be _NOT_ENTERED\n        require(_status != _ENTERED, \"ReentrancyGuard: reentrant call\");\n\n        // Any calls to nonReentrant after this point will fail\n        _status = _ENTERED;\n    }\n\n    function _nonReentrantAfter() private {\n        // By storing the original value once again, a refund is triggered (see\n        // https://eips.ethereum.org/EIPS/eip-2200)\n        _status = _NOT_ENTERED;\n    }\n\n    /**\n     * @dev Returns true if the reentrancy guard is currently set to \"entered\", which indicates there is a\n     * `nonReentrant` function in the call stack.\n     */\n    function _reentrancyGuardEntered() internal view returns (bool) {\n        return _status == _ENTERED;\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"
+    },
+    "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/IERC20PermitUpgradeable.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n */\ninterface IERC20PermitUpgradeable {\n    /**\n     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n     * given ``owner``'s signed approval.\n     *\n     * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n     * ordering also apply here.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `deadline` must be a timestamp in the future.\n     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n     * over the EIP712-formatted function arguments.\n     * - the signature must use ``owner``'s current nonce (see {nonces}).\n     *\n     * For more information on the signature format, see the\n     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n     * section].\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external;\n\n    /**\n     * @dev Returns the current nonce for `owner`. This value must be\n     * included whenever a signature is generated for {permit}.\n     *\n     * Every successful call to {permit} increases ``owner``'s nonce by one. This\n     * prevents a signature from being used multiple times.\n     */\n    function nonces(address owner) external view returns (uint256);\n\n    /**\n     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"
+    },
+    "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20Upgradeable {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the amount of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the amount of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves `amount` tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Moves `amount` tokens from `from` to `to` using the\n     * allowance mechanism. `amount` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 amount) external returns (bool);\n}\n"
+    },
+    "@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20Upgradeable.sol\";\nimport \"../extensions/IERC20PermitUpgradeable.sol\";\nimport \"../../../utils/AddressUpgradeable.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20Upgradeable {\n    using AddressUpgradeable for address;\n\n    /**\n     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     */\n    function safeTransfer(IERC20Upgradeable token, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n    }\n\n    /**\n     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the\n     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.\n     */\n    function safeTransferFrom(IERC20Upgradeable token, address from, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n    }\n\n    /**\n     * @dev Deprecated. This function has issues similar to the ones found in\n     * {IERC20-approve}, and its usage is discouraged.\n     *\n     * Whenever possible, use {safeIncreaseAllowance} and\n     * {safeDecreaseAllowance} instead.\n     */\n    function safeApprove(IERC20Upgradeable token, address spender, uint256 value) internal {\n        // safeApprove should only be called when setting an initial allowance,\n        // or when resetting it to zero. To increase and decrease it, use\n        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'\n        require(\n            (value == 0) || (token.allowance(address(this), spender) == 0),\n            \"SafeERC20: approve from non-zero to non-zero allowance\"\n        );\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n    }\n\n    /**\n     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     */\n    function safeIncreaseAllowance(IERC20Upgradeable token, address spender, uint256 value) internal {\n        uint256 oldAllowance = token.allowance(address(this), spender);\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));\n    }\n\n    /**\n     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     */\n    function safeDecreaseAllowance(IERC20Upgradeable token, address spender, uint256 value) internal {\n        unchecked {\n            uint256 oldAllowance = token.allowance(address(this), spender);\n            require(oldAllowance >= value, \"SafeERC20: decreased allowance below zero\");\n            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));\n        }\n    }\n\n    /**\n     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval\n     * to be set to zero before setting it to a non-zero value, such as USDT.\n     */\n    function forceApprove(IERC20Upgradeable token, address spender, uint256 value) internal {\n        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);\n\n        if (!_callOptionalReturnBool(token, approvalCall)) {\n            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));\n            _callOptionalReturn(token, approvalCall);\n        }\n    }\n\n    /**\n     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.\n     * Revert on invalid signature.\n     */\n    function safePermit(\n        IERC20PermitUpgradeable token,\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) internal {\n        uint256 nonceBefore = token.nonces(owner);\n        token.permit(owner, spender, value, deadline, v, r, s);\n        uint256 nonceAfter = token.nonces(owner);\n        require(nonceAfter == nonceBefore + 1, \"SafeERC20: permit did not succeed\");\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     */\n    function _callOptionalReturn(IERC20Upgradeable token, bytes memory data) private {\n        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that\n        // the target address contains contract code and also asserts for success in the low-level call.\n\n        bytes memory returndata = address(token).functionCall(data, \"SafeERC20: low-level call failed\");\n        require(returndata.length == 0 || abi.decode(returndata, (bool)), \"SafeERC20: ERC20 operation did not succeed\");\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     *\n     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.\n     */\n    function _callOptionalReturnBool(IERC20Upgradeable token, bytes memory data) private returns (bool) {\n        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false\n        // and not revert is the subcall reverts.\n\n        (bool success, bytes memory returndata) = address(token).call(data);\n        return\n            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && AddressUpgradeable.isContract(address(token));\n    }\n}\n"
+    },
+    "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary AddressUpgradeable {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     *\n     * Furthermore, `isContract` will also return true if the target contract within\n     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,\n     * which only has an effect at the end of a transaction.\n     * ====\n     *\n     * [IMPORTANT]\n     * ====\n     * You shouldn't rely on `isContract` to protect against flash loan attacks!\n     *\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n     * constructor.\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize/address.code.length, which returns 0\n        // for contracts in construction, since the code is only stored at the end\n        // of the constructor execution.\n\n        return account.code.length > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(address(this).balance >= value, \"Address: insufficient balance for call\");\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling\n     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.\n     *\n     * _Available since v4.8._\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        if (success) {\n            if (returndata.length == 0) {\n                // only check isContract if the call was successful and the return data is empty\n                // otherwise we already know that it was a contract\n                require(isContract(target), \"Address: call to non-contract\");\n            }\n            return returndata;\n        } else {\n            _revert(returndata, errorMessage);\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the\n     * revert reason or using the provided one.\n     *\n     * _Available since v4.3._\n     */\n    function verifyCallResult(\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal pure returns (bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            _revert(returndata, errorMessage);\n        }\n    }\n\n    function _revert(bytes memory returndata, string memory errorMessage) private pure {\n        // Look for revert reason and bubble it up if present\n        if (returndata.length > 0) {\n            // The easiest way to bubble the revert reason is using memory via assembly\n            /// @solidity memory-safe-assembly\n            assembly {\n                let returndata_size := mload(returndata)\n                revert(add(32, returndata), returndata_size)\n            }\n        } else {\n            revert(errorMessage);\n        }\n    }\n}\n"
+    },
+    "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n    function __Context_init() internal onlyInitializing {\n    }\n\n    function __Context_init_unchained() internal onlyInitializing {\n    }\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[50] private __gap;\n}\n"
+    },
+    "@openzeppelin/contracts/access/IAccessControl.sol": {
+      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev External interface of AccessControl declared to support ERC165 detection.\n */\ninterface IAccessControl {\n    /**\n     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`\n     *\n     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite\n     * {RoleAdminChanged} not being emitted signaling this.\n     *\n     * _Available since v3.1._\n     */\n    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);\n\n    /**\n     * @dev Emitted when `account` is granted `role`.\n     *\n     * `sender` is the account that originated the contract call, an admin role\n     * bearer except when using {AccessControl-_setupRole}.\n     */\n    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);\n\n    /**\n     * @dev Emitted when `account` is revoked `role`.\n     *\n     * `sender` is the account that originated the contract call:\n     *   - if using `revokeRole`, it is the admin role bearer\n     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)\n     */\n    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);\n\n    /**\n     * @dev Returns `true` if `account` has been granted `role`.\n     */\n    function hasRole(bytes32 role, address account) external view returns (bool);\n\n    /**\n     * @dev Returns the admin role that controls `role`. See {grantRole} and\n     * {revokeRole}.\n     *\n     * To change a role's admin, use {AccessControl-_setRoleAdmin}.\n     */\n    function getRoleAdmin(bytes32 role) external view returns (bytes32);\n\n    /**\n     * @dev Grants `role` to `account`.\n     *\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     */\n    function grantRole(bytes32 role, address account) external;\n\n    /**\n     * @dev Revokes `role` from `account`.\n     *\n     * If `account` had been granted `role`, emits a {RoleRevoked} event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     */\n    function revokeRole(bytes32 role, address account) external;\n\n    /**\n     * @dev Revokes `role` from the calling account.\n     *\n     * Roles are often managed via {grantRole} and {revokeRole}: this function's\n     * purpose is to provide a mechanism for accounts to lose their privileges\n     * if they are compromised (such as when a trusted device is misplaced).\n     *\n     * If the calling account had been granted `role`, emits a {RoleRevoked}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must be `account`.\n     */\n    function renounceRole(bytes32 role, address account) external;\n}\n"
+    },
+    "@venusprotocol/governance-contracts/contracts/Governance/AccessControlledV8.sol": {
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport \"@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol\";\nimport \"@openzeppelin/contracts-upgradeable/access/Ownable2StepUpgradeable.sol\";\n\nimport \"./IAccessControlManagerV8.sol\";\n\n/**\n * @title AccessControlledV8\n * @author Venus\n * @notice This contract is helper between access control manager and actual contract. This contract further inherited by other contract (using solidity 0.8.13)\n * to integrate access controlled mechanism. It provides initialise methods and verifying access methods.\n */\nabstract contract AccessControlledV8 is Initializable, Ownable2StepUpgradeable {\n    /// @notice Access control manager contract\n    IAccessControlManagerV8 internal _accessControlManager;\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n\n    /// @notice Emitted when access control manager contract address is changed\n    event NewAccessControlManager(address oldAccessControlManager, address newAccessControlManager);\n\n    /// @notice Thrown when the action is prohibited by AccessControlManager\n    error Unauthorized(address sender, address calledContract, string methodSignature);\n\n    function __AccessControlled_init(address accessControlManager_) internal onlyInitializing {\n        __Ownable2Step_init();\n        __AccessControlled_init_unchained(accessControlManager_);\n    }\n\n    function __AccessControlled_init_unchained(address accessControlManager_) internal onlyInitializing {\n        _setAccessControlManager(accessControlManager_);\n    }\n\n    /**\n     * @notice Sets the address of AccessControlManager\n     * @dev Admin function to set address of AccessControlManager\n     * @param accessControlManager_ The new address of the AccessControlManager\n     * @custom:event Emits NewAccessControlManager event\n     * @custom:access Only Governance\n     */\n    function setAccessControlManager(address accessControlManager_) external onlyOwner {\n        _setAccessControlManager(accessControlManager_);\n    }\n\n    /**\n     * @notice Returns the address of the access control manager contract\n     */\n    function accessControlManager() external view returns (IAccessControlManagerV8) {\n        return _accessControlManager;\n    }\n\n    /**\n     * @dev Internal function to set address of AccessControlManager\n     * @param accessControlManager_ The new address of the AccessControlManager\n     */\n    function _setAccessControlManager(address accessControlManager_) internal {\n        require(address(accessControlManager_) != address(0), \"invalid acess control manager address\");\n        address oldAccessControlManager = address(_accessControlManager);\n        _accessControlManager = IAccessControlManagerV8(accessControlManager_);\n        emit NewAccessControlManager(oldAccessControlManager, accessControlManager_);\n    }\n\n    /**\n     * @notice Reverts if the call is not allowed by AccessControlManager\n     * @param signature Method signature\n     */\n    function _checkAccessAllowed(string memory signature) internal view {\n        bool isAllowedToCall = _accessControlManager.isAllowedToCall(msg.sender, signature);\n\n        if (!isAllowedToCall) {\n            revert Unauthorized(msg.sender, address(this), signature);\n        }\n    }\n}\n"
+    },
+    "@venusprotocol/governance-contracts/contracts/Governance/IAccessControlManagerV8.sol": {
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity ^0.8.25;\n\nimport \"@openzeppelin/contracts/access/IAccessControl.sol\";\n\n/**\n * @title IAccessControlManagerV8\n * @author Venus\n * @notice Interface implemented by the `AccessControlManagerV8` contract.\n */\ninterface IAccessControlManagerV8 is IAccessControl {\n    function giveCallPermission(address contractAddress, string calldata functionSig, address accountToPermit) external;\n\n    function revokeCallPermission(\n        address contractAddress,\n        string calldata functionSig,\n        address accountToRevoke\n    ) external;\n\n    function isAllowedToCall(address account, string calldata functionSig) external view returns (bool);\n\n    function hasPermission(\n        address account,\n        address contractAddress,\n        string calldata functionSig\n    ) external view returns (bool);\n}\n"
+    },
+    "@venusprotocol/solidity-utilities/contracts/validators.sol": {
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\n/// @notice Thrown if the supplied address is a zero address where it is not allowed\nerror ZeroAddressNotAllowed();\n\n/// @notice Thrown if the supplied value is 0 where it is not allowed\nerror ZeroValueNotAllowed();\n\n/// @notice Checks if the provided address is nonzero, reverts otherwise\n/// @param address_ Address to check\n/// @custom:error ZeroAddressNotAllowed is thrown if the provided address is a zero address\nfunction ensureNonzeroAddress(address address_) pure {\n    if (address_ == address(0)) {\n        revert ZeroAddressNotAllowed();\n    }\n}\n\n/// @notice Checks if the provided value is nonzero, reverts otherwise\n/// @param value_ Value to check\n/// @custom:error ZeroValueNotAllowed is thrown if the provided value is 0\nfunction ensureNonzeroValue(uint256 value_) pure {\n    if (value_ == 0) {\n        revert ZeroValueNotAllowed();\n    }\n}\n"
+    },
+    "contracts/Interfaces/IRiskFund.sol": {
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity ^0.8.25;\n\n/**\n * @title IRiskFund\n * @author Venus\n * @notice Interface implemented by `RiskFund`.\n */\ninterface IRiskFund {\n    function transferReserveForAuction(address comptroller, uint256 amount) external returns (uint256);\n\n    function updatePoolState(\n        address comptroller,\n        address asset,\n        uint256 amount\n    ) external;\n\n    function getPoolsBaseAssetReserves(address comptroller) external view returns (uint256);\n}\n\n/**\n * @title IRiskFundGetters\n * @author Venus\n * @notice Interface implemented by `RiskFund` for getter methods.\n */\ninterface IRiskFundGetters {\n    function convertibleBaseAsset() external view returns (address);\n}\n"
+    },
+    "contracts/Interfaces/IRiskFundConverter.sol": {
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity ^0.8.25;\n\ninterface IRiskFundConverter {\n    function updateAssetsState(address comptroller, address asset) external;\n\n    function getPools(address asset) external view returns (address[] memory);\n}\n"
+    },
+    "contracts/ProtocolReserve/RiskFundStorage.sol": {
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport { Ownable2StepUpgradeable } from \"@openzeppelin/contracts-upgradeable/access/Ownable2StepUpgradeable.sol\";\nimport { ReentrancyGuardUpgradeable } from \"@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol\";\n\n/// @title ReserveHelpersStorage\n/// @author Venus\n/// @dev Reserve helpers storage\n/// @custom:security-contact https://github.com/VenusProtocol/protocol-reserve#discussion\ncontract ReserveHelpersStorage is Ownable2StepUpgradeable {\n    /// @notice Deprecated slot for assetReserves mapping\n    bytes32 private __deprecatedSlot1;\n\n    /// @notice Available asset's fund per pool in RiskFund\n    /// Comptroller(pool) -> Asset -> amount\n    mapping(address => mapping(address => uint256)) public poolAssetsFunds;\n\n    /// @notice Deprecated slot for poolRegistry address\n    bytes32 private __deprecatedSlot2;\n    /// @notice Deprecated slot for status variable\n    bytes32 private __deprecatedSlot3;\n\n    /// @dev This empty reserved space is put in place to allow future versions to add new\n    /// variables without shifting down storage in the inheritance chain.\n    uint256[46] private __gap;\n}\n\n/// @title MaxLoopsLimitHelpersStorage\n/// @author Venus\n/// @dev Max loop limit helpers storage\n/// @custom:security-contact https://github.com/VenusProtocol/protocol-reserve#discussion\ncontract MaxLoopsLimitHelpersStorage {\n    /// @notice Limit for the loops to avoid the DOS\n    /// @notice This state is deprecated, using it to prevent storage collision\n    uint256 public maxLoopsLimit;\n\n    /// @dev This empty reserved space is put in place to allow future versions to add new\n    /// variables without shifting down storage in the inheritance chain.\n    /// See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n    uint256[49] private __gap;\n}\n\n/// @title RiskFundV1Storage\n/// @author Venus\n/// @dev Risk fund V1 storage\n/// @custom:security-contact https://github.com/VenusProtocol/protocol-reserve#discussion\ncontract RiskFundV1Storage is ReserveHelpersStorage, MaxLoopsLimitHelpersStorage {\n    /// @notice Address of base asset\n    address public convertibleBaseAsset;\n    /// @notice Address of shortfall contract\n    address public shortfall;\n\n    /// @notice This state is deprecated, using it to prevent storage collision\n    address private pancakeSwapRouter;\n    /// @notice This state is deprecated, using it to prevent storage collision\n    uint256 private minAmountToConvert;\n}\n\n/// @title RiskFundV2Storage\n/// @author Venus\n/// @dev Risk fund V2 storage\n/// @custom:security-contact https://github.com/VenusProtocol/protocol-reserve#discussion\ncontract RiskFundV2Storage is RiskFundV1Storage, ReentrancyGuardUpgradeable {\n    /// @notice Risk fund converter address\n    address public riskFundConverter;\n}\n"
+    },
+    "contracts/ProtocolReserve/RiskFundV2.sol": {
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity 0.8.25;\n\nimport { IERC20Upgradeable } from \"@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol\";\nimport { AccessControlledV8 } from \"@venusprotocol/governance-contracts/contracts/Governance/AccessControlledV8.sol\";\nimport { SafeERC20Upgradeable } from \"@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol\";\nimport { ensureNonzeroAddress, ensureNonzeroValue } from \"@venusprotocol/solidity-utilities/contracts/validators.sol\";\n\nimport { IRiskFund } from \"../Interfaces/IRiskFund.sol\";\nimport { IRiskFundConverter } from \"../Interfaces/IRiskFundConverter.sol\";\nimport { RiskFundV2Storage } from \"./RiskFundStorage.sol\";\n\n/// @title RiskFundV2\n/// @author Venus\n/// @notice Contract with basic features to hold base asset for different Comptrollers\n/// @dev This contract does not support BNB\n/// @custom:security-contact https://github.com/VenusProtocol/protocol-reserve#discussion\ncontract RiskFundV2 is AccessControlledV8, RiskFundV2Storage, IRiskFund {\n    using SafeERC20Upgradeable for IERC20Upgradeable;\n\n    /// @notice Emitted when convertible base asset address is updated\n    event ConvertibleBaseAssetUpdated(address indexed oldConvertibleBaseAsset, address indexed newConvertibleBaseAsset);\n\n    /// @notice Emitted when risk fund converter address is updated\n    event RiskFundConverterUpdated(address indexed oldRiskFundConverter, address indexed newRiskFundConverter);\n\n    /// @notice Emitted when shortfall contract address is updated\n    event ShortfallContractUpdated(address indexed oldShortfallContract, address indexed newShortfallContract);\n\n    /// @notice Emitted when reserves are transferred for auction\n    event TransferredReserveForAuction(address indexed comptroller, uint256 amount);\n\n    /// @notice Emitted when pool asset states is updated with amount transferred to this contract\n    event PoolAssetsIncreased(address indexed comptroller, address indexed asset, uint256 amount);\n\n    /// @notice Emitted when pool asset states is updated with amount transferred from this contract on sweeping tokens\n    event PoolAssetsDecreased(address indexed comptroller, address indexed asset, uint256 amount);\n\n    /// @notice Event emitted when tokens are swept\n    event SweepToken(address indexed token, address indexed to, uint256 amount);\n\n    /// @notice Event emitted when tokens are swept and transferred from pool\n    event SweepTokenFromPool(\n        address indexed token,\n        address indexed comptroller,\n        address indexed receiver,\n        uint256 amount\n    );\n\n    /// @notice Error is thrown when updatePoolState is not called by riskFundConverter\n    error InvalidRiskFundConverter();\n\n    /// @notice Error is thrown when transferReserveForAuction is called by non shortfall address\n    error InvalidShortfallAddress();\n\n    /// @notice thrown when amount entered is greater than balance\n    error InsufficientBalance();\n\n    /// @notice Error is thrown when pool reserve is less than the amount needed\n    error InsufficientPoolReserve(address comptroller, uint256 amount, uint256 poolReserve);\n\n    /// @dev Convertible base asset setter\n    /// @param convertibleBaseAsset_ Address of the convertible base asset\n    /// @custom:event ConvertibleBaseAssetUpdated emit on success\n    /// @custom:error ZeroAddressNotAllowed is thrown when convertible base asset address is zero\n    /// @custom:access Only Governance\n    function setConvertibleBaseAsset(address convertibleBaseAsset_) external onlyOwner {\n        ensureNonzeroAddress(convertibleBaseAsset_);\n        emit ConvertibleBaseAssetUpdated(convertibleBaseAsset, convertibleBaseAsset_);\n        convertibleBaseAsset = convertibleBaseAsset_;\n    }\n\n    /// @dev Risk fund converter setter\n    /// @param riskFundConverter_ Address of the risk fund converter\n    /// @custom:event RiskFundConverterUpdated emit on success\n    /// @custom:error ZeroAddressNotAllowed is thrown when risk fund converter address is zero\n    /// @custom:access Only Governance\n    function setRiskFundConverter(address riskFundConverter_) external onlyOwner {\n        ensureNonzeroAddress(riskFundConverter_);\n        emit RiskFundConverterUpdated(riskFundConverter, riskFundConverter_);\n        riskFundConverter = riskFundConverter_;\n    }\n\n    /// @dev Shortfall contract address setter\n    /// @param shortfallContractAddress_ Address of the auction contract\n    /// @custom:event ShortfallContractUpdated emit on success\n    /// @custom:error ZeroAddressNotAllowed is thrown when shortfall contract address is zero\n    /// @custom:access Only Governance\n    function setShortfallContractAddress(address shortfallContractAddress_) external onlyOwner {\n        ensureNonzeroAddress(shortfallContractAddress_);\n        emit ShortfallContractUpdated(shortfall, shortfallContractAddress_);\n        shortfall = shortfallContractAddress_;\n    }\n\n    /// @dev Transfer tokens for auction to shortfall contract\n    /// @param comptroller Comptroller of the pool\n    /// @param amount Amount to be transferred to the shortfall\n    /// @return Amount of tokens transferred to the shortfall\n    /// @custom:event TransferredReserveForAuction emit on success\n    /// @custom:error InvalidShortfallAddress is thrown when caller is not shortfall contract\n    /// @custom:error InsufficientPoolReserve is thrown when pool reserve is less than the amount needed\n    /// @custom:access Only Shortfall contract\n    function transferReserveForAuction(address comptroller, uint256 amount)\n        external\n        override\n        nonReentrant\n        returns (uint256)\n    {\n        uint256 poolReserve = poolAssetsFunds[comptroller][convertibleBaseAsset];\n\n        if (msg.sender != shortfall) {\n            revert InvalidShortfallAddress();\n        }\n        if (amount > poolReserve) {\n            revert InsufficientPoolReserve(comptroller, amount, poolReserve);\n        }\n\n        unchecked {\n            poolAssetsFunds[comptroller][convertibleBaseAsset] = poolReserve - amount;\n        }\n\n        IERC20Upgradeable(convertibleBaseAsset).safeTransfer(shortfall, amount);\n        emit TransferredReserveForAuction(comptroller, amount);\n\n        return amount;\n    }\n\n    /// @notice Function to sweep baseAsset for pool, Tokens are sent to address(to)\n    /// @param tokenAddress Address of the asset(token)\n    /// @param to Address to which assets will be transferred\n    /// @param amount Amount need to sweep for the pool\n    /// @custom:event Emits SweepToken event on success\n    /// @custom:error ZeroAddressNotAllowed is thrown when tokenAddress/to address is zero\n    /// @custom:error ZeroValueNotAllowed is thrown when amount is zero\n    /// @custom:access Only Governance\n    function sweepToken(\n        address tokenAddress,\n        address to,\n        uint256 amount\n    ) external onlyOwner nonReentrant {\n        ensureNonzeroAddress(tokenAddress);\n        ensureNonzeroAddress(to);\n        ensureNonzeroValue(amount);\n\n        IERC20Upgradeable token = IERC20Upgradeable(tokenAddress);\n        preSweepToken(tokenAddress, amount);\n        token.safeTransfer(to, amount);\n\n        emit SweepToken(tokenAddress, to, amount);\n    }\n\n    /// @notice Function to sweep token from pool\n    /// @param tokenAddress Address of the asset(token)\n    /// @param comptroller Pool address that the assets belong to\n    /// @param receiver The receiver of the funds\n    /// @param amount Amount need to sweep from the pool\n    /// @custom:event Emits SweepTokenFromPool event on success\n    /// @custom:error ZeroAddressNotAllowed is thrown when tokenAddress, comptroller, or receiver address is zero\n    /// @custom:error ZeroValueNotAllowed is thrown when amount is zero\n    /// @custom:access Controlled by AccessControlManager\n    function sweepTokenFromPool(\n        address tokenAddress,\n        address comptroller,\n        address receiver,\n        uint256 amount\n    ) external nonReentrant {\n        _checkAccessAllowed(\"sweepTokenFromPool(address,address,address,uint256)\");\n        ensureNonzeroAddress(tokenAddress);\n        ensureNonzeroAddress(comptroller);\n        ensureNonzeroAddress(receiver);\n        ensureNonzeroValue(amount);\n\n        uint256 poolReserve = poolAssetsFunds[comptroller][tokenAddress];\n\n        if (amount > poolReserve) {\n            revert InsufficientPoolReserve(comptroller, amount, poolReserve);\n        }\n\n        unchecked {\n            poolAssetsFunds[comptroller][tokenAddress] = poolReserve - amount;\n        }\n\n        IERC20Upgradeable(tokenAddress).safeTransfer(receiver, amount);\n\n        emit SweepTokenFromPool(tokenAddress, comptroller, receiver, amount);\n    }\n\n    /**\n     * @notice Get the Amount of the Base asset in the risk fund for the specific pool.\n     * @param comptroller  Comptroller address(pool).\n     * @return Base Asset's reserve in risk fund.\n     */\n    function getPoolsBaseAssetReserves(address comptroller) external view returns (uint256) {\n        return poolAssetsFunds[comptroller][convertibleBaseAsset];\n    }\n\n    /// @dev Update the reserve of the asset for the specific pool after transferring to risk fund\n    /// @param comptroller Comptroller address (pool)\n    /// @param asset Address of the asset(token)\n    /// @param amount Amount transferred for the pool\n    /// @custom:event PoolAssetsIncreased emits on success\n    /// @custom:error InvalidRiskFundConverter is thrown if caller is not riskFundConverter contract\n    /// @custom:access Only RiskFundConverter contract\n    function updatePoolState(\n        address comptroller,\n        address asset,\n        uint256 amount\n    ) public {\n        if (msg.sender != riskFundConverter) {\n            revert InvalidRiskFundConverter();\n        }\n\n        poolAssetsFunds[comptroller][asset] += amount;\n        emit PoolAssetsIncreased(comptroller, asset, amount);\n    }\n\n    /// @dev Operations to perform before sweeping tokens\n    /// @param tokenAddress Address of the token\n    /// @param amount Amount transferred to address(to)\n    /// @custom:error InsufficientBalance is thrown when amount entered is greater than balance\n    function preSweepToken(address tokenAddress, uint256 amount) internal {\n        uint256 balance = IERC20Upgradeable(tokenAddress).balanceOf(address(this));\n        if (amount > balance) revert InsufficientBalance();\n\n        address[] memory pools = IRiskFundConverter(riskFundConverter).getPools(tokenAddress);\n\n        uint256 assetReserves;\n        uint256 poolsLength = pools.length;\n        for (uint256 i; i < poolsLength; ) {\n            assetReserves += poolAssetsFunds[pools[i]][tokenAddress];\n            unchecked {\n                ++i;\n            }\n        }\n\n        uint256 balanceDiff = balance - assetReserves;\n\n        if (balanceDiff < amount) {\n            uint256 amountDiff;\n            unchecked {\n                amountDiff = amount - balanceDiff;\n            }\n            uint256 distributedShare;\n            for (uint256 i; i < poolsLength; ) {\n                if (poolAssetsFunds[pools[i]][tokenAddress] != 0) {\n                    uint256 poolAmountShare;\n                    if (i < (poolsLength - 1)) {\n                        poolAmountShare = (poolAssetsFunds[pools[i]][tokenAddress] * amountDiff) / assetReserves;\n                        distributedShare += poolAmountShare;\n                    } else {\n                        poolAmountShare = amountDiff - distributedShare;\n                    }\n                    poolAssetsFunds[pools[i]][tokenAddress] -= poolAmountShare;\n                    emit PoolAssetsDecreased(pools[i], tokenAddress, poolAmountShare);\n                }\n                unchecked {\n                    ++i;\n                }\n            }\n        }\n    }\n}\n"
+    }
+  },
+  "settings": {
+    "optimizer": {
+      "enabled": true,
+      "runs": 10000
+    },
+    "evmVersion": "paris",
+    "outputSelection": {
+      "*": {
+        "*": [
+          "storageLayout",
+          "abi",
+          "evm.bytecode",
+          "evm.deployedBytecode",
+          "evm.methodIdentifiers",
+          "metadata",
+          "devdoc",
+          "userdoc",
+          "evm.gasEstimates"
+        ],
+        "": ["ast"]
+      }
+    },
+    "metadata": {
+      "useLiteralContent": true
+    }
+  }
+}

package/deployments/bscmainnet.json

@@ -7669,7 +7669,7 @@
       ]
     },
     "RiskFundV2_Implementation": {
-      "address": "0x7Ef5ABbcC9A701e728BeB7Afd4fb5747fAB15A28",
+      "address": "0x60e322C3418EcAEA5E6859551c299c968adc9816",
       "abi": [
         {
           "inputs": [],
@@ -7955,6 +7955,12 @@
               "name": "comptroller",
               "type": "address"
             },
+            {
+              "indexed": true,
+              "internalType": "address",
+              "name": "receiver",
+              "type": "address"
+            },
             {
               "indexed": false,
               "internalType": "uint256",

package/deployments/bscmainnet_addresses.json

@@ -15,7 +15,7 @@
     "RiskFundConverter_Implementation": "0xd420Bf9C31F6b4a98875B6e561b13aCB19210647",
     "RiskFundConverter_Proxy": "0xA5622D276CcbB8d9BBE3D1ffd1BB11a0032E53F0",
     "RiskFundV2": "0xdF31a28D68A2AB381D42b380649Ead7ae2A76E42",
-    "RiskFundV2_Implementation": "0x7Ef5ABbcC9A701e728BeB7Afd4fb5747fAB15A28",
+    "RiskFundV2_Implementation": "0x60e322C3418EcAEA5E6859551c299c968adc9816",
     "RiskFundV2_Proxy": "0xdF31a28D68A2AB381D42b380649Ead7ae2A76E42",
     "SingleTokenConverterBeacon": "0x4c9D57b05B245c40235D720A5f3A592f3DfF11ca",
     "SingleTokenConverterImp": "0x40ed28180Df01FdeB957224E4A5415704B9D5990",