@venusprotocol/protocol-reserve 3.4.0-dev.3 → 3.4.0-dev.5

package/deployments/{berachainbartio/solcInputs/027aeec938943227f90cf24126ba2c44.json → arbitrumone/solcInputs/64291858ccadc72be51008438a30a689.json}

@@ -116,7 +116,7 @@
       "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity ^0.8.25;\n\nimport \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol\";\n\ninterface VBep20Interface is IERC20Metadata {\n    /**\n     * @notice Underlying asset for this VToken\n     */\n    function underlying() external view returns (address);\n}\n"
     },
     "@venusprotocol/oracle/contracts/ResilientOracle.sol": {
-      "content": "// SPDX-License-Identifier: BSD-3-Clause\n// SPDX-FileCopyrightText: 2022 Venus\npragma solidity 0.8.25;\n\nimport \"@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol\";\nimport \"./interfaces/VBep20Interface.sol\";\nimport \"./interfaces/OracleInterface.sol\";\nimport \"@venusprotocol/governance-contracts/contracts/Governance/AccessControlledV8.sol\";\n\n/**\n * @title ResilientOracle\n * @author Venus\n * @notice The Resilient Oracle is the main contract that the protocol uses to fetch prices of assets.\n * \n * DeFi protocols are vulnerable to price oracle failures including oracle manipulation and incorrectly\n * reported prices. If only one oracle is used, this creates a single point of failure and opens a vector\n * for attacking the protocol.\n * \n * The Resilient Oracle uses multiple sources and fallback mechanisms to provide accurate prices and protect\n * the protocol from oracle attacks. Currently it includes integrations with Chainlink, Pyth, Binance Oracle\n * and TWAP (Time-Weighted Average Price) oracles. TWAP uses PancakeSwap as the on-chain price source.\n * \n * For every market (vToken) we configure the main, pivot and fallback oracles. The oracles are configured per \n * vToken's underlying asset address. The main oracle oracle is the most trustworthy price source, the pivot \n * oracle is used as a loose sanity checker and the fallback oracle is used as a backup price source. \n * \n * To validate prices returned from two oracles, we use an upper and lower bound ratio that is set for every\n * market. The upper bound ratio represents the deviation between reported price (the price that’s being\n * validated) and the anchor price (the price we are validating against) above which the reported price will\n * be invalidated. The lower bound ratio presents the deviation between reported price and anchor price below\n * which the reported price will be invalidated. So for oracle price to be considered valid the below statement\n * should be true:\n\n```\nanchorRatio = anchorPrice/reporterPrice\nisValid = anchorRatio <= upperBoundAnchorRatio && anchorRatio >= lowerBoundAnchorRatio\n```\n\n * In most cases, Chainlink is used as the main oracle, TWAP or Pyth oracles are used as the pivot oracle depending\n * on which supports the given market and Binance oracle is used as the fallback oracle. For some markets we may\n * use Pyth or TWAP as the main oracle if the token price is not supported by Chainlink or Binance oracles. \n * \n * For a fetched price to be valid it must be positive and not stagnant. If the price is invalid then we consider the\n * oracle to be stagnant and treat it like it's disabled.\n */\ncontract ResilientOracle is PausableUpgradeable, AccessControlledV8, ResilientOracleInterface {\n    /**\n     * @dev Oracle roles:\n     * **main**: The most trustworthy price source\n     * **pivot**: Price oracle used as a loose sanity checker\n     * **fallback**: The backup source when main oracle price is invalidated\n     */\n    enum OracleRole {\n        MAIN,\n        PIVOT,\n        FALLBACK\n    }\n\n    struct TokenConfig {\n        /// @notice asset address\n        address asset;\n        /// @notice `oracles` stores the oracles based on their role in the following order:\n        /// [main, pivot, fallback],\n        /// It can be indexed with the corresponding enum OracleRole value\n        address[3] oracles;\n        /// @notice `enableFlagsForOracles` stores the enabled state\n        /// for each oracle in the same order as `oracles`\n        bool[3] enableFlagsForOracles;\n    }\n\n    uint256 public constant INVALID_PRICE = 0;\n\n    /// @notice Native market address\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    address public immutable nativeMarket;\n\n    /// @notice VAI address\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    address public immutable vai;\n\n    /// @notice Set this as asset address for Native token on each chain.This is the underlying for vBNB (on bsc)\n    /// and can serve as any underlying asset of a market that supports native tokens\n    address public constant NATIVE_TOKEN_ADDR = 0xbBbBBBBbbBBBbbbBbbBbbbbBBbBbbbbBbBbbBBbB;\n\n    /// @notice Bound validator contract address\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    BoundValidatorInterface public immutable boundValidator;\n\n    mapping(address => TokenConfig) private tokenConfigs;\n\n    event TokenConfigAdded(\n        address indexed asset,\n        address indexed mainOracle,\n        address indexed pivotOracle,\n        address fallbackOracle\n    );\n\n    /// Event emitted when an oracle is set\n    event OracleSet(address indexed asset, address indexed oracle, uint256 indexed role);\n\n    /// Event emitted when an oracle is enabled or disabled\n    event OracleEnabled(address indexed asset, uint256 indexed role, bool indexed enable);\n\n    /**\n     * @notice Checks whether an address is null or not\n     */\n    modifier notNullAddress(address someone) {\n        if (someone == address(0)) revert(\"can't be zero address\");\n        _;\n    }\n\n    /**\n     * @notice Checks whether token config exists by checking whether asset is null address\n     * @dev address can't be null, so it's suitable to be used to check the validity of the config\n     * @param asset asset address\n     */\n    modifier checkTokenConfigExistence(address asset) {\n        if (tokenConfigs[asset].asset == address(0)) revert(\"token config must exist\");\n        _;\n    }\n\n    /// @notice Constructor for the implementation contract. Sets immutable variables.\n    /// @dev nativeMarketAddress can be address(0) if on the chain we do not support native market\n    ///      (e.g vETH on ethereum would not be supported, only vWETH)\n    /// @param nativeMarketAddress The address of a native market (for bsc it would be vBNB address)\n    /// @param vaiAddress The address of the VAI token (if there is VAI on the deployed chain).\n    ///          Set to address(0) of VAI is not existent.\n    /// @param _boundValidator Address of the bound validator contract\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor(\n        address nativeMarketAddress,\n        address vaiAddress,\n        BoundValidatorInterface _boundValidator\n    ) notNullAddress(address(_boundValidator)) {\n        nativeMarket = nativeMarketAddress;\n        vai = vaiAddress;\n        boundValidator = _boundValidator;\n\n        _disableInitializers();\n    }\n\n    /**\n     * @notice Initializes the contract admin and sets the BoundValidator contract address\n     * @param accessControlManager_ Address of the access control manager contract\n     */\n    function initialize(address accessControlManager_) external initializer {\n        __AccessControlled_init(accessControlManager_);\n        __Pausable_init();\n    }\n\n    /**\n     * @notice Pauses oracle\n     * @custom:access Only Governance\n     */\n    function pause() external {\n        _checkAccessAllowed(\"pause()\");\n        _pause();\n    }\n\n    /**\n     * @notice Unpauses oracle\n     * @custom:access Only Governance\n     */\n    function unpause() external {\n        _checkAccessAllowed(\"unpause()\");\n        _unpause();\n    }\n\n    /**\n     * @notice Batch sets token configs\n     * @param tokenConfigs_ Token config array\n     * @custom:access Only Governance\n     * @custom:error Throws a length error if the length of the token configs array is 0\n     */\n    function setTokenConfigs(TokenConfig[] memory tokenConfigs_) external {\n        if (tokenConfigs_.length == 0) revert(\"length can't be 0\");\n        uint256 numTokenConfigs = tokenConfigs_.length;\n        for (uint256 i; i < numTokenConfigs; ) {\n            setTokenConfig(tokenConfigs_[i]);\n            unchecked {\n                ++i;\n            }\n        }\n    }\n\n    /**\n     * @notice Sets oracle for a given asset and role.\n     * @dev Supplied asset **must** exist and main oracle may not be null\n     * @param asset Asset address\n     * @param oracle Oracle address\n     * @param role Oracle role\n     * @custom:access Only Governance\n     * @custom:error Null address error if main-role oracle address is null\n     * @custom:error NotNullAddress error is thrown if asset address is null\n     * @custom:error TokenConfigExistance error is thrown if token config is not set\n     * @custom:event Emits OracleSet event with asset address, oracle address and role of the oracle for the asset\n     */\n    function setOracle(\n        address asset,\n        address oracle,\n        OracleRole role\n    ) external notNullAddress(asset) checkTokenConfigExistence(asset) {\n        _checkAccessAllowed(\"setOracle(address,address,uint8)\");\n        if (oracle == address(0) && role == OracleRole.MAIN) revert(\"can't set zero address to main oracle\");\n        tokenConfigs[asset].oracles[uint256(role)] = oracle;\n        emit OracleSet(asset, oracle, uint256(role));\n    }\n\n    /**\n     * @notice Enables/ disables oracle for the input asset. Token config for the input asset **must** exist\n     * @dev Configuration for the asset **must** already exist and the asset cannot be 0 address\n     * @param asset Asset address\n     * @param role Oracle role\n     * @param enable Enabled boolean of the oracle\n     * @custom:access Only Governance\n     * @custom:error NotNullAddress error is thrown if asset address is null\n     * @custom:error TokenConfigExistance error is thrown if token config is not set\n     */\n    function enableOracle(\n        address asset,\n        OracleRole role,\n        bool enable\n    ) external notNullAddress(asset) checkTokenConfigExistence(asset) {\n        _checkAccessAllowed(\"enableOracle(address,uint8,bool)\");\n        tokenConfigs[asset].enableFlagsForOracles[uint256(role)] = enable;\n        emit OracleEnabled(asset, uint256(role), enable);\n    }\n\n    /**\n     * @notice Updates the TWAP pivot oracle price.\n     * @dev This function should always be called before calling getUnderlyingPrice\n     * @param vToken vToken address\n     */\n    function updatePrice(address vToken) external override {\n        address asset = _getUnderlyingAsset(vToken);\n        (address pivotOracle, bool pivotOracleEnabled) = getOracle(asset, OracleRole.PIVOT);\n        if (pivotOracle != address(0) && pivotOracleEnabled) {\n            //if pivot oracle is not TwapOracle it will revert so we need to catch the revert\n            try TwapInterface(pivotOracle).updateTwap(asset) {} catch {}\n        }\n    }\n\n    /**\n     * @notice Updates the pivot oracle price. Currently using TWAP\n     * @dev This function should always be called before calling getPrice\n     * @param asset asset address\n     */\n    function updateAssetPrice(address asset) external {\n        (address pivotOracle, bool pivotOracleEnabled) = getOracle(asset, OracleRole.PIVOT);\n        if (pivotOracle != address(0) && pivotOracleEnabled) {\n            //if pivot oracle is not TwapOracle it will revert so we need to catch the revert\n            try TwapInterface(pivotOracle).updateTwap(asset) {} catch {}\n        }\n    }\n\n    /**\n     * @dev Gets token config by asset address\n     * @param asset asset address\n     * @return tokenConfig Config for the asset\n     */\n    function getTokenConfig(address asset) external view returns (TokenConfig memory) {\n        return tokenConfigs[asset];\n    }\n\n    /**\n     * @notice Gets price of the underlying asset for a given vToken. Validation flow:\n     * - Check if the oracle is paused globally\n     * - Validate price from main oracle against pivot oracle\n     * - Validate price from fallback oracle against pivot oracle if the first validation failed\n     * - Validate price from main oracle against fallback oracle if the second validation failed\n     * In the case that the pivot oracle is not available but main price is available and validation is successful,\n     * main oracle price is returned.\n     * @param vToken vToken address\n     * @return price USD price in scaled decimal places.\n     * @custom:error Paused error is thrown when resilent oracle is paused\n     * @custom:error Invalid resilient oracle price error is thrown if fetched prices from oracle is invalid\n     */\n    function getUnderlyingPrice(address vToken) external view override returns (uint256) {\n        if (paused()) revert(\"resilient oracle is paused\");\n\n        address asset = _getUnderlyingAsset(vToken);\n        return _getPrice(asset);\n    }\n\n    /**\n     * @notice Gets price of the asset\n     * @param asset asset address\n     * @return price USD price in scaled decimal places.\n     * @custom:error Paused error is thrown when resilent oracle is paused\n     * @custom:error Invalid resilient oracle price error is thrown if fetched prices from oracle is invalid\n     */\n    function getPrice(address asset) external view override returns (uint256) {\n        if (paused()) revert(\"resilient oracle is paused\");\n        return _getPrice(asset);\n    }\n\n    /**\n     * @notice Sets/resets single token configs.\n     * @dev main oracle **must not** be a null address\n     * @param tokenConfig Token config struct\n     * @custom:access Only Governance\n     * @custom:error NotNullAddress is thrown if asset address is null\n     * @custom:error NotNullAddress is thrown if main-role oracle address for asset is null\n     * @custom:event Emits TokenConfigAdded event when the asset config is set successfully by the authorized account\n     */\n    function setTokenConfig(\n        TokenConfig memory tokenConfig\n    ) public notNullAddress(tokenConfig.asset) notNullAddress(tokenConfig.oracles[uint256(OracleRole.MAIN)]) {\n        _checkAccessAllowed(\"setTokenConfig(TokenConfig)\");\n\n        tokenConfigs[tokenConfig.asset] = tokenConfig;\n        emit TokenConfigAdded(\n            tokenConfig.asset,\n            tokenConfig.oracles[uint256(OracleRole.MAIN)],\n            tokenConfig.oracles[uint256(OracleRole.PIVOT)],\n            tokenConfig.oracles[uint256(OracleRole.FALLBACK)]\n        );\n    }\n\n    /**\n     * @notice Gets oracle and enabled status by asset address\n     * @param asset asset address\n     * @param role Oracle role\n     * @return oracle Oracle address based on role\n     * @return enabled Enabled flag of the oracle based on token config\n     */\n    function getOracle(address asset, OracleRole role) public view returns (address oracle, bool enabled) {\n        oracle = tokenConfigs[asset].oracles[uint256(role)];\n        enabled = tokenConfigs[asset].enableFlagsForOracles[uint256(role)];\n    }\n\n    function _getPrice(address asset) internal view returns (uint256) {\n        uint256 pivotPrice = INVALID_PRICE;\n\n        // Get pivot oracle price, Invalid price if not available or error\n        (address pivotOracle, bool pivotOracleEnabled) = getOracle(asset, OracleRole.PIVOT);\n        if (pivotOracleEnabled && pivotOracle != address(0)) {\n            try OracleInterface(pivotOracle).getPrice(asset) returns (uint256 pricePivot) {\n                pivotPrice = pricePivot;\n            } catch {}\n        }\n\n        // Compare main price and pivot price, return main price and if validation was successful\n        // note: In case pivot oracle is not available but main price is available and\n        // validation is successful, the main oracle price is returned.\n        (uint256 mainPrice, bool validatedPivotMain) = _getMainOraclePrice(\n            asset,\n            pivotPrice,\n            pivotOracleEnabled && pivotOracle != address(0)\n        );\n        if (mainPrice != INVALID_PRICE && validatedPivotMain) return mainPrice;\n\n        // Compare fallback and pivot if main oracle comparision fails with pivot\n        // Return fallback price when fallback price is validated successfully with pivot oracle\n        (uint256 fallbackPrice, bool validatedPivotFallback) = _getFallbackOraclePrice(asset, pivotPrice);\n        if (fallbackPrice != INVALID_PRICE && validatedPivotFallback) return fallbackPrice;\n\n        // Lastly compare main price and fallback price\n        if (\n            mainPrice != INVALID_PRICE &&\n            fallbackPrice != INVALID_PRICE &&\n            boundValidator.validatePriceWithAnchorPrice(asset, mainPrice, fallbackPrice)\n        ) {\n            return mainPrice;\n        }\n\n        revert(\"invalid resilient oracle price\");\n    }\n\n    /**\n     * @notice Gets a price for the provided asset\n     * @dev This function won't revert when price is 0, because the fallback oracle may still be\n     * able to fetch a correct price\n     * @param asset asset address\n     * @param pivotPrice Pivot oracle price\n     * @param pivotEnabled If pivot oracle is not empty and enabled\n     * @return price USD price in scaled decimals\n     * e.g. asset decimals is 8 then price is returned as 10**18 * 10**(18-8) = 10**28 decimals\n     * @return pivotValidated Boolean representing if the validation of main oracle price\n     * and pivot oracle price were successful\n     * @custom:error Invalid price error is thrown if main oracle fails to fetch price of the asset\n     * @custom:error Invalid price error is thrown if main oracle is not enabled or main oracle\n     * address is null\n     */\n    function _getMainOraclePrice(\n        address asset,\n        uint256 pivotPrice,\n        bool pivotEnabled\n    ) internal view returns (uint256, bool) {\n        (address mainOracle, bool mainOracleEnabled) = getOracle(asset, OracleRole.MAIN);\n        if (mainOracleEnabled && mainOracle != address(0)) {\n            try OracleInterface(mainOracle).getPrice(asset) returns (uint256 mainOraclePrice) {\n                if (!pivotEnabled) {\n                    return (mainOraclePrice, true);\n                }\n                if (pivotPrice == INVALID_PRICE) {\n                    return (mainOraclePrice, false);\n                }\n                return (\n                    mainOraclePrice,\n                    boundValidator.validatePriceWithAnchorPrice(asset, mainOraclePrice, pivotPrice)\n                );\n            } catch {\n                return (INVALID_PRICE, false);\n            }\n        }\n\n        return (INVALID_PRICE, false);\n    }\n\n    /**\n     * @dev This function won't revert when the price is 0 because getPrice checks if price is > 0\n     * @param asset asset address\n     * @return price USD price in 18 decimals\n     * @return pivotValidated Boolean representing if the validation of fallback oracle price\n     * and pivot oracle price were successfull\n     * @custom:error Invalid price error is thrown if fallback oracle fails to fetch price of the asset\n     * @custom:error Invalid price error is thrown if fallback oracle is not enabled or fallback oracle\n     * address is null\n     */\n    function _getFallbackOraclePrice(address asset, uint256 pivotPrice) private view returns (uint256, bool) {\n        (address fallbackOracle, bool fallbackEnabled) = getOracle(asset, OracleRole.FALLBACK);\n        if (fallbackEnabled && fallbackOracle != address(0)) {\n            try OracleInterface(fallbackOracle).getPrice(asset) returns (uint256 fallbackOraclePrice) {\n                if (pivotPrice == INVALID_PRICE) {\n                    return (fallbackOraclePrice, false);\n                }\n                return (\n                    fallbackOraclePrice,\n                    boundValidator.validatePriceWithAnchorPrice(asset, fallbackOraclePrice, pivotPrice)\n                );\n            } catch {\n                return (INVALID_PRICE, false);\n            }\n        }\n\n        return (INVALID_PRICE, false);\n    }\n\n    /**\n     * @dev This function returns the underlying asset of a vToken\n     * @param vToken vToken address\n     * @return asset underlying asset address\n     */\n    function _getUnderlyingAsset(address vToken) private view notNullAddress(vToken) returns (address asset) {\n        if (vToken == nativeMarket) {\n            asset = NATIVE_TOKEN_ADDR;\n        } else if (vToken == vai) {\n            asset = vai;\n        } else {\n            asset = VBep20Interface(vToken).underlying();\n        }\n    }\n}\n"
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\n// SPDX-FileCopyrightText: 2022 Venus\npragma solidity 0.8.25;\n\nimport \"@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol\";\nimport \"./interfaces/VBep20Interface.sol\";\nimport \"./interfaces/OracleInterface.sol\";\nimport \"@venusprotocol/governance-contracts/contracts/Governance/AccessControlledV8.sol\";\n\n/**\n * @title ResilientOracle\n * @author Venus\n * @notice The Resilient Oracle is the main contract that the protocol uses to fetch prices of assets.\n *\n * DeFi protocols are vulnerable to price oracle failures including oracle manipulation and incorrectly\n * reported prices. If only one oracle is used, this creates a single point of failure and opens a vector\n * for attacking the protocol.\n *\n * The Resilient Oracle uses multiple sources and fallback mechanisms to provide accurate prices and protect\n * the protocol from oracle attacks. Currently it includes integrations with Chainlink, Pyth, Binance Oracle\n * and TWAP (Time-Weighted Average Price) oracles. TWAP uses PancakeSwap as the on-chain price source.\n *\n * For every market (vToken) we configure the main, pivot and fallback oracles. The oracles are configured per\n * vToken's underlying asset address. The main oracle oracle is the most trustworthy price source, the pivot\n * oracle is used as a loose sanity checker and the fallback oracle is used as a backup price source.\n *\n * To validate prices returned from two oracles, we use an upper and lower bound ratio that is set for every\n * market. The upper bound ratio represents the deviation between reported price (the price that’s being\n * validated) and the anchor price (the price we are validating against) above which the reported price will\n * be invalidated. The lower bound ratio presents the deviation between reported price and anchor price below\n * which the reported price will be invalidated. So for oracle price to be considered valid the below statement\n * should be true:\n\n```\nanchorRatio = anchorPrice/reporterPrice\nisValid = anchorRatio <= upperBoundAnchorRatio && anchorRatio >= lowerBoundAnchorRatio\n```\n\n * In most cases, Chainlink is used as the main oracle, TWAP or Pyth oracles are used as the pivot oracle depending\n * on which supports the given market and Binance oracle is used as the fallback oracle. For some markets we may\n * use Pyth or TWAP as the main oracle if the token price is not supported by Chainlink or Binance oracles.\n *\n * For a fetched price to be valid it must be positive and not stagnant. If the price is invalid then we consider the\n * oracle to be stagnant and treat it like it's disabled.\n */\ncontract ResilientOracle is PausableUpgradeable, AccessControlledV8, ResilientOracleInterface {\n    /**\n     * @dev Oracle roles:\n     * **main**: The most trustworthy price source\n     * **pivot**: Price oracle used as a loose sanity checker\n     * **fallback**: The backup source when main oracle price is invalidated\n     */\n    enum OracleRole {\n        MAIN,\n        PIVOT,\n        FALLBACK\n    }\n\n    struct TokenConfig {\n        /// @notice asset address\n        address asset;\n        /// @notice `oracles` stores the oracles based on their role in the following order:\n        /// [main, pivot, fallback],\n        /// It can be indexed with the corresponding enum OracleRole value\n        address[3] oracles;\n        /// @notice `enableFlagsForOracles` stores the enabled state\n        /// for each oracle in the same order as `oracles`\n        bool[3] enableFlagsForOracles;\n    }\n\n    uint256 public constant INVALID_PRICE = 0;\n\n    /// @notice Native market address\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    address public immutable nativeMarket;\n\n    /// @notice VAI address\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    address public immutable vai;\n\n    /// @notice Set this as asset address for Native token on each chain.This is the underlying for vBNB (on bsc)\n    /// and can serve as any underlying asset of a market that supports native tokens\n    address public constant NATIVE_TOKEN_ADDR = 0xbBbBBBBbbBBBbbbBbbBbbbbBBbBbbbbBbBbbBBbB;\n\n    /// @notice Bound validator contract address\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    BoundValidatorInterface public immutable boundValidator;\n\n    mapping(address => TokenConfig) private tokenConfigs;\n\n    event TokenConfigAdded(\n        address indexed asset,\n        address indexed mainOracle,\n        address indexed pivotOracle,\n        address fallbackOracle\n    );\n\n    /// Event emitted when an oracle is set\n    event OracleSet(address indexed asset, address indexed oracle, uint256 indexed role);\n\n    /// Event emitted when an oracle is enabled or disabled\n    event OracleEnabled(address indexed asset, uint256 indexed role, bool indexed enable);\n\n    /**\n     * @notice Checks whether an address is null or not\n     */\n    modifier notNullAddress(address someone) {\n        if (someone == address(0)) revert(\"can't be zero address\");\n        _;\n    }\n\n    /**\n     * @notice Checks whether token config exists by checking whether asset is null address\n     * @dev address can't be null, so it's suitable to be used to check the validity of the config\n     * @param asset asset address\n     */\n    modifier checkTokenConfigExistence(address asset) {\n        if (tokenConfigs[asset].asset == address(0)) revert(\"token config must exist\");\n        _;\n    }\n\n    /// @notice Constructor for the implementation contract. Sets immutable variables.\n    /// @dev nativeMarketAddress can be address(0) if on the chain we do not support native market\n    ///      (e.g vETH on ethereum would not be supported, only vWETH)\n    /// @param nativeMarketAddress The address of a native market (for bsc it would be vBNB address)\n    /// @param vaiAddress The address of the VAI token (if there is VAI on the deployed chain).\n    ///          Set to address(0) of VAI is not existent.\n    /// @param _boundValidator Address of the bound validator contract\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor(\n        address nativeMarketAddress,\n        address vaiAddress,\n        BoundValidatorInterface _boundValidator\n    ) notNullAddress(address(_boundValidator)) {\n        nativeMarket = nativeMarketAddress;\n        vai = vaiAddress;\n        boundValidator = _boundValidator;\n\n        _disableInitializers();\n    }\n\n    /**\n     * @notice Initializes the contract admin and sets the BoundValidator contract address\n     * @param accessControlManager_ Address of the access control manager contract\n     */\n    function initialize(address accessControlManager_) external initializer {\n        __AccessControlled_init(accessControlManager_);\n        __Pausable_init();\n    }\n\n    /**\n     * @notice Pauses oracle\n     * @custom:access Only Governance\n     */\n    function pause() external {\n        _checkAccessAllowed(\"pause()\");\n        _pause();\n    }\n\n    /**\n     * @notice Unpauses oracle\n     * @custom:access Only Governance\n     */\n    function unpause() external {\n        _checkAccessAllowed(\"unpause()\");\n        _unpause();\n    }\n\n    /**\n     * @notice Batch sets token configs\n     * @param tokenConfigs_ Token config array\n     * @custom:access Only Governance\n     * @custom:error Throws a length error if the length of the token configs array is 0\n     */\n    function setTokenConfigs(TokenConfig[] memory tokenConfigs_) external {\n        if (tokenConfigs_.length == 0) revert(\"length can't be 0\");\n        uint256 numTokenConfigs = tokenConfigs_.length;\n        for (uint256 i; i < numTokenConfigs; ) {\n            setTokenConfig(tokenConfigs_[i]);\n            unchecked {\n                ++i;\n            }\n        }\n    }\n\n    /**\n     * @notice Sets oracle for a given asset and role.\n     * @dev Supplied asset **must** exist and main oracle may not be null\n     * @param asset Asset address\n     * @param oracle Oracle address\n     * @param role Oracle role\n     * @custom:access Only Governance\n     * @custom:error Null address error if main-role oracle address is null\n     * @custom:error NotNullAddress error is thrown if asset address is null\n     * @custom:error TokenConfigExistance error is thrown if token config is not set\n     * @custom:event Emits OracleSet event with asset address, oracle address and role of the oracle for the asset\n     */\n    function setOracle(\n        address asset,\n        address oracle,\n        OracleRole role\n    ) external notNullAddress(asset) checkTokenConfigExistence(asset) {\n        _checkAccessAllowed(\"setOracle(address,address,uint8)\");\n        if (oracle == address(0) && role == OracleRole.MAIN) revert(\"can't set zero address to main oracle\");\n        tokenConfigs[asset].oracles[uint256(role)] = oracle;\n        emit OracleSet(asset, oracle, uint256(role));\n    }\n\n    /**\n     * @notice Enables/ disables oracle for the input asset. Token config for the input asset **must** exist\n     * @dev Configuration for the asset **must** already exist and the asset cannot be 0 address\n     * @param asset Asset address\n     * @param role Oracle role\n     * @param enable Enabled boolean of the oracle\n     * @custom:access Only Governance\n     * @custom:error NotNullAddress error is thrown if asset address is null\n     * @custom:error TokenConfigExistance error is thrown if token config is not set\n     */\n    function enableOracle(\n        address asset,\n        OracleRole role,\n        bool enable\n    ) external notNullAddress(asset) checkTokenConfigExistence(asset) {\n        _checkAccessAllowed(\"enableOracle(address,uint8,bool)\");\n        tokenConfigs[asset].enableFlagsForOracles[uint256(role)] = enable;\n        emit OracleEnabled(asset, uint256(role), enable);\n    }\n\n    /**\n     * @notice Updates the TWAP pivot oracle price.\n     * @dev This function should always be called before calling getUnderlyingPrice\n     * @param vToken vToken address\n     */\n    function updatePrice(address vToken) external override {\n        address asset = _getUnderlyingAsset(vToken);\n        (address pivotOracle, bool pivotOracleEnabled) = getOracle(asset, OracleRole.PIVOT);\n        if (pivotOracle != address(0) && pivotOracleEnabled) {\n            //if pivot oracle is not TwapOracle it will revert so we need to catch the revert\n            try TwapInterface(pivotOracle).updateTwap(asset) {} catch {}\n        }\n    }\n\n    /**\n     * @notice Updates the pivot oracle price. Currently using TWAP\n     * @dev This function should always be called before calling getPrice\n     * @param asset asset address\n     */\n    function updateAssetPrice(address asset) external {\n        (address pivotOracle, bool pivotOracleEnabled) = getOracle(asset, OracleRole.PIVOT);\n        if (pivotOracle != address(0) && pivotOracleEnabled) {\n            //if pivot oracle is not TwapOracle it will revert so we need to catch the revert\n            try TwapInterface(pivotOracle).updateTwap(asset) {} catch {}\n        }\n    }\n\n    /**\n     * @dev Gets token config by asset address\n     * @param asset asset address\n     * @return tokenConfig Config for the asset\n     */\n    function getTokenConfig(address asset) external view returns (TokenConfig memory) {\n        return tokenConfigs[asset];\n    }\n\n    /**\n     * @notice Gets price of the underlying asset for a given vToken. Validation flow:\n     * - Check if the oracle is paused globally\n     * - Validate price from main oracle against pivot oracle\n     * - Validate price from fallback oracle against pivot oracle if the first validation failed\n     * - Validate price from main oracle against fallback oracle if the second validation failed\n     * In the case that the pivot oracle is not available but main price is available and validation is successful,\n     * main oracle price is returned.\n     * @param vToken vToken address\n     * @return price USD price in scaled decimal places.\n     * @custom:error Paused error is thrown when resilent oracle is paused\n     * @custom:error Invalid resilient oracle price error is thrown if fetched prices from oracle is invalid\n     */\n    function getUnderlyingPrice(address vToken) external view override returns (uint256) {\n        if (paused()) revert(\"resilient oracle is paused\");\n\n        address asset = _getUnderlyingAsset(vToken);\n        return _getPrice(asset);\n    }\n\n    /**\n     * @notice Gets price of the asset\n     * @param asset asset address\n     * @return price USD price in scaled decimal places.\n     * @custom:error Paused error is thrown when resilent oracle is paused\n     * @custom:error Invalid resilient oracle price error is thrown if fetched prices from oracle is invalid\n     */\n    function getPrice(address asset) external view override returns (uint256) {\n        if (paused()) revert(\"resilient oracle is paused\");\n        return _getPrice(asset);\n    }\n\n    /**\n     * @notice Sets/resets single token configs.\n     * @dev main oracle **must not** be a null address\n     * @param tokenConfig Token config struct\n     * @custom:access Only Governance\n     * @custom:error NotNullAddress is thrown if asset address is null\n     * @custom:error NotNullAddress is thrown if main-role oracle address for asset is null\n     * @custom:event Emits TokenConfigAdded event when the asset config is set successfully by the authorized account\n     */\n    function setTokenConfig(\n        TokenConfig memory tokenConfig\n    ) public notNullAddress(tokenConfig.asset) notNullAddress(tokenConfig.oracles[uint256(OracleRole.MAIN)]) {\n        _checkAccessAllowed(\"setTokenConfig(TokenConfig)\");\n\n        tokenConfigs[tokenConfig.asset] = tokenConfig;\n        emit TokenConfigAdded(\n            tokenConfig.asset,\n            tokenConfig.oracles[uint256(OracleRole.MAIN)],\n            tokenConfig.oracles[uint256(OracleRole.PIVOT)],\n            tokenConfig.oracles[uint256(OracleRole.FALLBACK)]\n        );\n    }\n\n    /**\n     * @notice Gets oracle and enabled status by asset address\n     * @param asset asset address\n     * @param role Oracle role\n     * @return oracle Oracle address based on role\n     * @return enabled Enabled flag of the oracle based on token config\n     */\n    function getOracle(address asset, OracleRole role) public view returns (address oracle, bool enabled) {\n        oracle = tokenConfigs[asset].oracles[uint256(role)];\n        enabled = tokenConfigs[asset].enableFlagsForOracles[uint256(role)];\n    }\n\n    function _getPrice(address asset) internal view returns (uint256) {\n        uint256 pivotPrice = INVALID_PRICE;\n\n        // Get pivot oracle price, Invalid price if not available or error\n        (address pivotOracle, bool pivotOracleEnabled) = getOracle(asset, OracleRole.PIVOT);\n        if (pivotOracleEnabled && pivotOracle != address(0)) {\n            try OracleInterface(pivotOracle).getPrice(asset) returns (uint256 pricePivot) {\n                pivotPrice = pricePivot;\n            } catch {}\n        }\n\n        // Compare main price and pivot price, return main price and if validation was successful\n        // note: In case pivot oracle is not available but main price is available and\n        // validation is successful, the main oracle price is returned.\n        (uint256 mainPrice, bool validatedPivotMain) = _getMainOraclePrice(\n            asset,\n            pivotPrice,\n            pivotOracleEnabled && pivotOracle != address(0)\n        );\n        if (mainPrice != INVALID_PRICE && validatedPivotMain) return mainPrice;\n\n        // Compare fallback and pivot if main oracle comparision fails with pivot\n        // Return fallback price when fallback price is validated successfully with pivot oracle\n        (uint256 fallbackPrice, bool validatedPivotFallback) = _getFallbackOraclePrice(asset, pivotPrice);\n        if (fallbackPrice != INVALID_PRICE && validatedPivotFallback) return fallbackPrice;\n\n        // Lastly compare main price and fallback price\n        if (\n            mainPrice != INVALID_PRICE &&\n            fallbackPrice != INVALID_PRICE &&\n            boundValidator.validatePriceWithAnchorPrice(asset, mainPrice, fallbackPrice)\n        ) {\n            return mainPrice;\n        }\n\n        revert(\"invalid resilient oracle price\");\n    }\n\n    /**\n     * @notice Gets a price for the provided asset\n     * @dev This function won't revert when price is 0, because the fallback oracle may still be\n     * able to fetch a correct price\n     * @param asset asset address\n     * @param pivotPrice Pivot oracle price\n     * @param pivotEnabled If pivot oracle is not empty and enabled\n     * @return price USD price in scaled decimals\n     * e.g. asset decimals is 8 then price is returned as 10**18 * 10**(18-8) = 10**28 decimals\n     * @return pivotValidated Boolean representing if the validation of main oracle price\n     * and pivot oracle price were successful\n     * @custom:error Invalid price error is thrown if main oracle fails to fetch price of the asset\n     * @custom:error Invalid price error is thrown if main oracle is not enabled or main oracle\n     * address is null\n     */\n    function _getMainOraclePrice(\n        address asset,\n        uint256 pivotPrice,\n        bool pivotEnabled\n    ) internal view returns (uint256, bool) {\n        (address mainOracle, bool mainOracleEnabled) = getOracle(asset, OracleRole.MAIN);\n        if (mainOracleEnabled && mainOracle != address(0)) {\n            try OracleInterface(mainOracle).getPrice(asset) returns (uint256 mainOraclePrice) {\n                if (!pivotEnabled) {\n                    return (mainOraclePrice, true);\n                }\n                if (pivotPrice == INVALID_PRICE) {\n                    return (mainOraclePrice, false);\n                }\n                return (\n                    mainOraclePrice,\n                    boundValidator.validatePriceWithAnchorPrice(asset, mainOraclePrice, pivotPrice)\n                );\n            } catch {\n                return (INVALID_PRICE, false);\n            }\n        }\n\n        return (INVALID_PRICE, false);\n    }\n\n    /**\n     * @dev This function won't revert when the price is 0 because getPrice checks if price is > 0\n     * @param asset asset address\n     * @return price USD price in 18 decimals\n     * @return pivotValidated Boolean representing if the validation of fallback oracle price\n     * and pivot oracle price were successfully\n     * @custom:error Invalid price error is thrown if fallback oracle fails to fetch price of the asset\n     * @custom:error Invalid price error is thrown if fallback oracle is not enabled or fallback oracle\n     * address is null\n     */\n    function _getFallbackOraclePrice(address asset, uint256 pivotPrice) private view returns (uint256, bool) {\n        (address fallbackOracle, bool fallbackEnabled) = getOracle(asset, OracleRole.FALLBACK);\n        if (fallbackEnabled && fallbackOracle != address(0)) {\n            try OracleInterface(fallbackOracle).getPrice(asset) returns (uint256 fallbackOraclePrice) {\n                if (pivotPrice == INVALID_PRICE) {\n                    return (fallbackOraclePrice, false);\n                }\n                return (\n                    fallbackOraclePrice,\n                    boundValidator.validatePriceWithAnchorPrice(asset, fallbackOraclePrice, pivotPrice)\n                );\n            } catch {\n                return (INVALID_PRICE, false);\n            }\n        }\n\n        return (INVALID_PRICE, false);\n    }\n\n    /**\n     * @dev This function returns the underlying asset of a vToken\n     * @param vToken vToken address\n     * @return asset underlying asset address\n     */\n    function _getUnderlyingAsset(address vToken) private view notNullAddress(vToken) returns (address asset) {\n        if (vToken == nativeMarket) {\n            asset = NATIVE_TOKEN_ADDR;\n        } else if (vToken == vai) {\n            asset = vai;\n        } else {\n            asset = VBep20Interface(vToken).underlying();\n        }\n    }\n}\n"
     },
     "@venusprotocol/solidity-utilities/contracts/constants.sol": {
       "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity ^0.8.25;\n\n/// @dev Base unit for computations, usually used in scaling (multiplications, divisions)\nuint256 constant EXP_SCALE = 1e18;\n\n/// @dev A unit (literal one) in EXP_SCALE, usually used in additions/subtractions\nuint256 constant MANTISSA_ONE = EXP_SCALE;\n\n/// @dev The approximate number of seconds per year\nuint256 constant SECONDS_PER_YEAR = 31_536_000;\n"
@@ -146,7 +146,7 @@
       "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity ^0.8.25;\n\ninterface IPoolRegistry {\n    /// @notice Get VToken in the Pool for an Asset\n    function getVTokenForAsset(address comptroller, address asset) external view returns (address);\n\n    /// @notice Get the addresss of the Pools supported that include a market for the provided asset\n    function getPoolsSupportedByAsset(address asset) external view returns (address[] memory);\n}\n"
     },
     "contracts/Interfaces/IProtocolShareReserve.sol": {
-      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity ^0.8.25;\n\ninterface IProtocolShareReserve {\n    /// @notice it represents the type of vToken income\n    enum IncomeType {\n        SPREAD,\n        LIQUIDATION\n    }\n\n    function updateAssetsState(\n        address comptroller,\n        address asset,\n        IncomeType incomeType\n    ) external;\n}\n"
+      "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity ^0.8.25;\n\ninterface IProtocolShareReserve {\n    /// @notice it represents the type of vToken income\n    enum IncomeType {\n        SPREAD,\n        LIQUIDATION,\n        ERC4626_WRAPPER_REWARDS,\n        FLASHLOAN\n    }\n\n    function updateAssetsState(\n        address comptroller,\n        address asset,\n        IncomeType incomeType\n    ) external;\n}\n"
     },
     "contracts/Interfaces/IRiskFund.sol": {
       "content": "// SPDX-License-Identifier: BSD-3-Clause\npragma solidity ^0.8.25;\n\n/**\n * @title IRiskFund\n * @author Venus\n * @notice Interface implemented by `RiskFund`.\n */\ninterface IRiskFund {\n    function transferReserveForAuction(address comptroller, uint256 amount) external returns (uint256);\n\n    function updatePoolState(\n        address comptroller,\n        address asset,\n        uint256 amount\n    ) external;\n\n    function getPoolsBaseAssetReserves(address comptroller) external view returns (uint256);\n}\n\n/**\n * @title IRiskFundGetters\n * @author Venus\n * @notice Interface implemented by `RiskFund` for getter methods.\n */\ninterface IRiskFundGetters {\n    function convertibleBaseAsset() external view returns (address);\n}\n"

package/deployments/arbitrumone.json

@@ -2284,7 +2284,7 @@
       ]
     },
     "ProtocolShareReserve_Implementation": {
-      "address": "0x6B2D272CD89585BCE8404006f366a77680324F7d",
+      "address": "0xFde46857B36881d69F742D44Aa5bF81e8f8dcF94",
       "abi": [
         {
           "inputs": [

package/deployments/arbitrumone_addresses.json

@@ -7,7 +7,7 @@
     "ConverterNetwork_Proxy": "0x2F6672C9A0988748b0172D97961BecfD9DC6D6d5",
     "DefaultProxyAdmin": "0xF6fF3e9459227f0cDE8B102b90bE25960317b216",
     "ProtocolShareReserve": "0xF9263eaF7eB50815194f26aCcAB6765820B13D41",
-    "ProtocolShareReserve_Implementation": "0x6B2D272CD89585BCE8404006f366a77680324F7d",
+    "ProtocolShareReserve_Implementation": "0xFde46857B36881d69F742D44Aa5bF81e8f8dcF94",
     "ProtocolShareReserve_Proxy": "0xF9263eaF7eB50815194f26aCcAB6765820B13D41",
     "SingleTokenConverterBeacon": "0x993900Ab4ef4092e5B76d4781D09A2732086F0F0",
     "SingleTokenConverterImp": "0x07801d54906Be49517DfDEd26c89A81fb94e504B",