@vellumai/assistant 0.11.3 → 0.11.4-dev.202608190019.b94dbf2

package/src/providers/speech-to-text/deepgram-flux-realtime.ts

@@ -0,0 +1,679 @@
+/**
+ * Deepgram Flux realtime streaming STT adapter (`wss://api.deepgram.com/v2/listen`).
+ *
+ * Flux is Deepgram's conversational speech API: the model itself decides where
+ * a turn ends, so this adapter carries no endpointing heuristics of its own.
+ * It owns the socket lifecycle (connect, teardown) and delegates
+ * every inbound transcript frame to {@link parseFluxFrame}, the pure protocol
+ * module, which maps Flux's wire shapes onto the daemon's
+ * {@link SttStreamServerEvent} contract.
+ *
+ * Lifecycle:
+ * 1. {@link start} opens the WebSocket and resolves once it is established.
+ * 2. {@link sendAudio} forwards raw audio with a backpressure guard.
+ * 3. {@link stop} sends `CloseStream` and waits for Flux to flush the turn
+ *    in progress before closing.
+ * 4. The `onEvent` callback receives `partial`, `final`, the four
+ *    turn-detection events, `error`, and finally `closed`.
+ *
+ * There is **no `finalizeUtterance`**. Flux commits a transcript only when
+ * its model closes a turn, and its wire protocol offers no mid-stream flush:
+ * `CloseStream` is the only way to make it answer for a turn still in
+ * progress. A method that returned `finalized` without flushing would claim a
+ * commit the provider never made and lose the tail of every turn released on
+ * a caller-side boundary, so the optional method is left off and callers
+ * feature-detect it and fall back to {@link stop}.
+ *
+ * There is also **no keepalive**. Flux accepts exactly two control messages,
+ * `CloseStream` and `Configure`; the v1 streaming `KeepAlive` is not one of
+ * them, and sending it earns an `UNPARSABLE_CLIENT_MESSAGE` error frame
+ * followed by a server close. Audio is the only thing that holds a Flux stream
+ * open, so a stream that has to survive a long silence must carry silent
+ * frames rather than a control message.
+ * See https://developers.deepgram.com/docs/flux/close-stream
+ *
+ * Error handling mirrors `deepgram-realtime.ts`: socket closes and errors map
+ * onto {@link SttErrorCategory} values (`auth`, `rate-limit`, `timeout`,
+ * `provider-error`), in-session failures surface as `error` events, and
+ * teardown always emits `closed`. One failure produces exactly one `error`:
+ * a fatal `Error` frame is reported with the provider's own diagnostic, and
+ * the close Deepgram sends immediately after it goes straight to `closed`.
+ */
+
+import { getConfig } from "../../config/loader.js";
+import type { LiveVoiceFluxConfig } from "../../config/schemas/live-voice.js";
+import type {
+  StreamingTranscriber,
+  SttErrorCategory,
+  SttStreamServerEvent,
+} from "../../stt/types.js";
+import { SttError } from "../../stt/types.js";
+import { getLogger } from "../../util/logger.js";
+import type { FluxEncoding } from "./deepgram-flux-frames.js";
+import {
+  buildFluxQueryParams,
+  parseFluxFrame,
+} from "./deepgram-flux-frames.js";
+
+const log = getLogger("deepgram-flux-realtime");
+
+// ---------------------------------------------------------------------------
+// Constants
+// ---------------------------------------------------------------------------
+
+const WS_BASE_URL = "wss://api.deepgram.com";
+
+/** Flux lives on the v2 listen route; the v1 route speaks a different protocol. */
+const FLUX_PATH = "/v2/listen";
+
+/** Timeout (ms) for the WebSocket handshake before {@link start} rejects. */
+const DEFAULT_CONNECT_TIMEOUT_MS = 10_000;
+
+/**
+ * Inactivity timeout (ms). If audio has been sent but Flux says nothing back
+ * for this long, the adapter closes with a `timeout` error. A stream with no
+ * audio awaiting a response (mic gated while the assistant speaks) is
+ * legitimately silent and never times out.
+ */
+const DEFAULT_INACTIVITY_TIMEOUT_MS = 30_000;
+
+/** Outbound buffer ceiling (bytes) before {@link sendAudio} drops frames. */
+const MAX_BUFFERED_AMOUNT = 1024 * 1024; // 1 MiB
+
+/** Grace (ms) after `CloseStream` before the socket is force-closed. */
+const CLOSE_GRACE_MS = 5_000;
+
+/** Raw-audio encoding of the stream: clients send linear16 PCM. */
+const AUDIO_ENCODING: FluxEncoding = "linear16";
+
+/** Default sample rate (Hz) when the client negotiates none. */
+const DEFAULT_SAMPLE_RATE = 16_000;
+
+/** Bytes per sample of mono linear16 PCM. */
+const LINEAR16_BYTES_PER_SAMPLE = 2;
+
+/**
+ * Chunk duration Deepgram recommends for Flux. Logged alongside the observed
+ * duration so a runbook can compare the two without instrumenting capture.
+ */
+const RECOMMENDED_CHUNK_MS = 80;
+
+// ---------------------------------------------------------------------------
+// Options
+// ---------------------------------------------------------------------------
+
+/**
+ * Transport-level wiring for a Flux session. Turn-detection tuning (model,
+ * thresholds, force-end timeout) is not here: it comes from `liveVoice.flux`,
+ * which the adapter reads itself, so there is exactly one place to turn those
+ * dials.
+ */
+export interface DeepgramFluxRealtimeOptions {
+  /** Audio sample rate in Hz (default: 16000). */
+  sampleRate?: number;
+  /** Connect timeout in milliseconds. Default: 10_000. */
+  connectTimeoutMs?: number;
+  /** Inactivity timeout in milliseconds. Default: 30_000. */
+  inactivityTimeoutMs?: number;
+}
+
+// ---------------------------------------------------------------------------
+// Minimal WebSocket interface
+// ---------------------------------------------------------------------------
+
+/**
+ * Minimal structural WebSocket interface so tests can substitute a mock
+ * without depending on Bun's global WebSocket type at the type level.
+ */
+interface WsLike {
+  readonly readyState: number;
+  readonly bufferedAmount: number;
+  send(data: string | ArrayBufferLike | ArrayBuffer | Uint8Array): void;
+  close(code?: number, reason?: string): void;
+  addEventListener(type: "open", listener: () => void): void;
+  addEventListener(
+    type: "close",
+    listener: (ev: { code: number; reason: string }) => void,
+  ): void;
+  addEventListener(type: "error", listener: (ev: unknown) => void): void;
+  addEventListener(
+    type: "message",
+    listener: (ev: { data: unknown }) => void,
+  ): void;
+  removeEventListener(type: string, listener: unknown): void;
+}
+
+const WS_OPEN = 1;
+
+// ---------------------------------------------------------------------------
+// Adapter implementation
+// ---------------------------------------------------------------------------
+
+/**
+ * Deepgram Flux streaming transcriber.
+ *
+ * Implements the daemon {@link StreamingTranscriber} contract on top of
+ * Deepgram's conversational `/v2/listen` WebSocket API.
+ */
+export class DeepgramFluxRealtimeTranscriber implements StreamingTranscriber {
+  readonly providerId = "deepgram-flux" as const;
+  readonly boundaryId = "daemon-streaming" as const;
+
+  private readonly apiKey: string;
+  /** Turn-detection tuning, snapshotted when the transcriber is built. */
+  private readonly flux: LiveVoiceFluxConfig;
+  private readonly sampleRate: number;
+  private readonly connectTimeoutMs: number;
+  private readonly inactivityTimeoutMs: number;
+
+  /** The live WebSocket connection, set during start(). */
+  private ws: WsLike | null = null;
+
+  /** Callback for emitting events to the session orchestrator. */
+  private onEvent: ((event: SttStreamServerEvent) => void) | null = null;
+
+  /** Whether the session has been fully closed. */
+  private closed = false;
+
+  /** Whether stop() has been called. */
+  private stopping = false;
+
+  /**
+   * Whether a fatal `Error` frame has already been reported as an `error`
+   * event. Deepgram closes the socket right after that frame, so the close
+   * that follows carries no information the provider's own diagnostic did not
+   * already carry and must not raise a second, more generic error.
+   */
+  private fatalErrorReported = false;
+
+  /** Whether the per-session chunk-cadence line has already been logged. */
+  private chunkCadenceLogged = false;
+
+  /** Inactivity timer handle. */
+  private inactivityTimer: ReturnType<typeof setTimeout> | null = null;
+
+  /**
+   * When the first audio frame went out after the last inbound provider
+   * message; null while nothing is owed a response. The inactivity watchdog
+   * only rules "hung" while this is set: Flux says nothing during silence,
+   * so inbound quiet alone is not evidence of a hang.
+   */
+  private awaitingResponseSinceMs: number | null = null;
+
+  /** Close grace timer handle. */
+  private closeGraceTimer: ReturnType<typeof setTimeout> | null = null;
+
+  constructor(apiKey: string, options: DeepgramFluxRealtimeOptions = {}) {
+    this.apiKey = apiKey;
+    this.flux = getConfig().liveVoice.flux;
+    this.sampleRate = options.sampleRate ?? DEFAULT_SAMPLE_RATE;
+    this.connectTimeoutMs =
+      options.connectTimeoutMs ?? DEFAULT_CONNECT_TIMEOUT_MS;
+    this.inactivityTimeoutMs =
+      options.inactivityTimeoutMs ?? DEFAULT_INACTIVITY_TIMEOUT_MS;
+  }
+
+  // ── StreamingTranscriber interface ──────────────────────────────────
+
+  async start(onEvent: (event: SttStreamServerEvent) => void): Promise<void> {
+    if (this.ws) {
+      throw new Error("DeepgramFluxRealtimeTranscriber: start() called twice");
+    }
+    this.onEvent = onEvent;
+
+    const url = this.buildWebSocketUrl();
+    log.info({ url }, "Opening Deepgram Flux session");
+
+    const ws = this.createWebSocket(url);
+    this.ws = ws;
+
+    // Wait for the WebSocket to open or fail. Failures reject as SttError so
+    // the caller gets the same normalized category an in-session failure
+    // would carry. A bad key is an `auth` problem whether it lands during
+    // the handshake or after it.
+    await new Promise<void>((resolve, reject) => {
+      let settled = false;
+
+      const connectTimer = setTimeout(() => {
+        if (settled) {
+          return;
+        }
+        settled = true;
+        this.forceClose();
+        reject(
+          new SttError("timeout", "Deepgram Flux realtime connect timeout"),
+        );
+      }, this.connectTimeoutMs);
+
+      const onOpen = () => {
+        if (settled) {
+          return;
+        }
+        settled = true;
+        clearTimeout(connectTimer);
+        resolve();
+      };
+
+      const onError = (ev: unknown) => {
+        if (settled) {
+          return;
+        }
+        settled = true;
+        clearTimeout(connectTimer);
+        reject(
+          new SttError(
+            "provider-error",
+            `Deepgram Flux realtime connect error: ${describeSocketEvent(ev)}`,
+          ),
+        );
+      };
+
+      const onClose = (ev: { code: number; reason: string }) => {
+        if (settled) {
+          return;
+        }
+        settled = true;
+        clearTimeout(connectTimer);
+        reject(
+          new SttError(
+            closeCodeCategory(ev.code),
+            `Deepgram Flux WebSocket closed before open (code=${ev.code}, reason=${ev.reason})`,
+          ),
+        );
+      };
+
+      ws.addEventListener("open", onOpen);
+      ws.addEventListener("error", onError);
+      ws.addEventListener("close", onClose);
+    });
+
+    // Socket is open. Attach the handlers for the active session lifetime.
+    this.attachSessionHandlers(ws);
+    this.resetInactivityTimer();
+
+    log.info({ model: this.flux.model }, "Deepgram Flux session opened");
+  }
+
+  sendAudio(audio: Buffer, _mimeType: string): void {
+    if (this.closed || this.stopping) {
+      return;
+    }
+
+    const ws = this.ws;
+    if (!ws || ws.readyState !== WS_OPEN) {
+      return;
+    }
+
+    // Backpressure check: drop frames rather than grow the outbound buffer
+    // without bound when the network cannot keep up with the audio rate.
+    if (ws.bufferedAmount > MAX_BUFFERED_AMOUNT) {
+      log.warn(
+        { bufferedAmount: ws.bufferedAmount },
+        "Deepgram Flux backpressure: dropping audio frame",
+      );
+      return;
+    }
+
+    ws.send(new Uint8Array(audio));
+    this.awaitingResponseSinceMs ??= Date.now();
+    this.logChunkCadenceOnce(audio.byteLength);
+  }
+
+  stop(): void {
+    if (this.closed || this.stopping) {
+      return;
+    }
+    this.stopping = true;
+
+    log.info("Stopping Deepgram Flux session");
+
+    const ws = this.ws;
+    if (!ws || ws.readyState !== WS_OPEN) {
+      this.emitClosedAndCleanup();
+      return;
+    }
+
+    // `CloseStream` tells Flux to finish the turn in progress and answer
+    // before it terminates the socket.
+    try {
+      ws.send(JSON.stringify({ type: "CloseStream" }));
+    } catch {
+      this.emitClosedAndCleanup();
+      return;
+    }
+
+    this.closeGraceTimer = setTimeout(() => {
+      log.warn("Deepgram Flux close grace timeout, forcing close");
+      this.emitClosedAndCleanup();
+    }, CLOSE_GRACE_MS);
+  }
+
+  // ── WebSocket lifecycle ─────────────────────────────────────────────
+
+  /**
+   * Create a WebSocket instance. Factored out for test mockability.
+   *
+   * The key travels in the `Authorization: Token` header. Flux needs no
+   * query auth, so no URL ever carries the credential and nothing here needs
+   * redacting before it reaches a log.
+   */
+  private createWebSocket(url: string): WsLike {
+    const WebSocketCtor = (
+      globalThis as unknown as {
+        WebSocket: new (
+          url: string,
+          options?: { headers?: Record<string, string> },
+        ) => WsLike;
+      }
+    ).WebSocket;
+    if (typeof WebSocketCtor !== "function") {
+      throw new Error("global WebSocket is not available in this runtime");
+    }
+    return new WebSocketCtor(url, {
+      headers: { Authorization: `Token ${this.apiKey}` },
+    });
+  }
+
+  private attachSessionHandlers(ws: WsLike): void {
+    ws.addEventListener("message", (ev: { data: unknown }) => {
+      this.handleProviderMessage(ev.data);
+    });
+
+    ws.addEventListener("close", (ev: { code: number; reason: string }) => {
+      this.handleProviderClose(ev.code, ev.reason);
+    });
+
+    ws.addEventListener("error", (ev: unknown) => {
+      this.handleProviderError(ev);
+    });
+  }
+
+  // ── Provider message handling ───────────────────────────────────────
+
+  /**
+   * Normalize one inbound Flux frame into daemon events.
+   *
+   * Frames go straight to {@link parseFluxFrame}, which owns JSON decoding,
+   * the wire shapes, and the graceful handling of anything it does not
+   * recognize.
+   */
+  private handleProviderMessage(data: unknown): void {
+    if (this.closed) {
+      return;
+    }
+
+    this.resetInactivityTimer();
+
+    const raw =
+      typeof data === "string"
+        ? data
+        : data instanceof ArrayBuffer
+          ? new TextDecoder().decode(data)
+          : null;
+    if (raw === null) {
+      // Unexpected binary format, ignore.
+      return;
+    }
+
+    for (const event of parseFluxFrame(raw)) {
+      if (event.type === "error") {
+        this.fatalErrorReported = true;
+      }
+      this.emitEvent(event);
+    }
+  }
+
+  /** Handle provider-side WebSocket close. */
+  private handleProviderClose(code: number, reason: string): void {
+    if (this.closed) {
+      return;
+    }
+
+    // Normal close (1000) or going-away (1001) after stop() is expected.
+    if (this.stopping && (code === 1000 || code === 1001)) {
+      log.info({ code, reason }, "Deepgram Flux session closed normally");
+      this.emitClosedAndCleanup();
+      return;
+    }
+
+    // A fatal `Error` frame already reported the provider's own diagnostic,
+    // and the close is that frame's second half. Go straight to `closed` so
+    // callers see exactly one error for one failure.
+    if (this.fatalErrorReported) {
+      log.info(
+        { code, reason },
+        "Deepgram Flux session closed after a fatal error frame",
+      );
+      this.emitClosedAndCleanup();
+      return;
+    }
+
+    log.warn({ code, reason }, "Deepgram Flux session closed unexpectedly");
+
+    this.emitEvent({
+      type: "error",
+      category: closeCodeCategory(code),
+      message: `Deepgram Flux WebSocket closed (code=${code}, reason=${reason})`,
+    });
+    this.emitClosedAndCleanup();
+  }
+
+  /** Handle provider-side WebSocket error. */
+  private handleProviderError(ev: unknown): void {
+    if (this.closed) {
+      return;
+    }
+
+    const message = describeSocketEvent(ev);
+
+    // Same one-error-per-failure rule as the close path: a socket error that
+    // trails a fatal `Error` frame is that failure surfacing again.
+    if (this.fatalErrorReported) {
+      log.info(
+        { error: message },
+        "Deepgram Flux WebSocket error after a fatal error frame",
+      );
+      this.emitClosedAndCleanup();
+      return;
+    }
+
+    log.error({ error: message }, "Deepgram Flux WebSocket error");
+
+    this.emitEvent({
+      type: "error",
+      category: "provider-error",
+      message: `Deepgram Flux WebSocket error: ${message}`,
+    });
+    this.emitClosedAndCleanup();
+  }
+
+  // ── Event emission & cleanup ────────────────────────────────────────
+
+  /**
+   * Emit a server event to the session orchestrator. Swallows listener errors
+   * so a bad consumer cannot tear down the adapter.
+   */
+  private emitEvent(event: SttStreamServerEvent): void {
+    if (!this.onEvent) {
+      return;
+    }
+    try {
+      this.onEvent(event);
+    } catch (err) {
+      log.warn({ error: err }, "Listener error in Deepgram Flux adapter");
+    }
+  }
+
+  /**
+   * Log the observed audio chunk duration once per session, next to the
+   * cadence Deepgram recommends for Flux. Capture cadence is a client
+   * concern; this only makes it measurable from the daemon side.
+   */
+  private logChunkCadenceOnce(byteLength: number): void {
+    if (this.chunkCadenceLogged) {
+      return;
+    }
+    this.chunkCadenceLogged = true;
+
+    const observedChunkMs =
+      this.sampleRate > 0
+        ? Math.round(
+            (byteLength / LINEAR16_BYTES_PER_SAMPLE / this.sampleRate) * 1_000,
+          )
+        : undefined;
+
+    log.info(
+      {
+        byteLength,
+        sampleRate: this.sampleRate,
+        encoding: AUDIO_ENCODING,
+        observedChunkMs,
+        recommendedChunkMs: RECOMMENDED_CHUNK_MS,
+      },
+      "Deepgram Flux audio chunk cadence",
+    );
+  }
+
+  /**
+   * Emit `closed` and release every resource. Idempotent, safe to call from
+   * any teardown path.
+   */
+  private emitClosedAndCleanup(): void {
+    if (this.closed) {
+      return;
+    }
+    this.closed = true;
+
+    this.clearTimers();
+    this.forceClose();
+
+    this.emitEvent({ type: "closed" });
+    this.onEvent = null;
+  }
+
+  /** Force-close the WebSocket without emitting events. */
+  private forceClose(): void {
+    const ws = this.ws;
+    this.ws = null;
+    if (!ws) {
+      return;
+    }
+
+    try {
+      ws.close();
+    } catch {
+      // Best effort: already closed sockets may throw.
+    }
+  }
+
+  private clearTimers(): void {
+    if (this.inactivityTimer !== null) {
+      clearTimeout(this.inactivityTimer);
+      this.inactivityTimer = null;
+    }
+    if (this.closeGraceTimer !== null) {
+      clearTimeout(this.closeGraceTimer);
+      this.closeGraceTimer = null;
+    }
+  }
+
+  /**
+   * Reset the inactivity watchdog on inbound provider messages. Not reset on
+   * outbound audio: continuous audio from the caller must not mask a silent
+   * provider.
+   */
+  private resetInactivityTimer(): void {
+    this.awaitingResponseSinceMs = null;
+    this.armInactivityTimer(this.inactivityTimeoutMs);
+  }
+
+  /**
+   * (Re)arm the inactivity watchdog. On fire it only rules "hung" when audio
+   * has been awaiting a response for a full timeout window; otherwise the
+   * stream is merely idle and the timer re-arms for the remainder.
+   */
+  private armInactivityTimer(delayMs: number): void {
+    if (this.closed || this.stopping) {
+      return;
+    }
+
+    if (this.inactivityTimer !== null) {
+      clearTimeout(this.inactivityTimer);
+    }
+
+    this.inactivityTimer = setTimeout(() => {
+      if (this.closed) {
+        return;
+      }
+
+      const since = this.awaitingResponseSinceMs;
+      if (since === null) {
+        this.armInactivityTimer(this.inactivityTimeoutMs);
+        return;
+      }
+      const waitedMs = Date.now() - since;
+      if (waitedMs < this.inactivityTimeoutMs) {
+        this.armInactivityTimer(this.inactivityTimeoutMs - waitedMs);
+        return;
+      }
+
+      log.warn("Deepgram Flux inactivity timeout");
+      this.emitEvent({
+        type: "error",
+        category: "timeout",
+        message: "Deepgram Flux session timed out due to inactivity",
+      });
+      this.emitClosedAndCleanup();
+    }, delayMs);
+  }
+
+  // ── URL construction ────────────────────────────────────────────────
+
+  /**
+   * Build the Flux WebSocket URL. Query construction (including threshold
+   * clamping and omitting `eager_eot_threshold` when unset) belongs to
+   * {@link buildFluxQueryParams}.
+   */
+  private buildWebSocketUrl(): string {
+    const query = buildFluxQueryParams({
+      model: this.flux.model,
+      encoding: AUDIO_ENCODING,
+      sampleRate: this.sampleRate,
+      eotThreshold: this.flux.eotThreshold,
+      eagerEotThreshold: this.flux.eagerEotThreshold,
+      eotTimeoutMs: this.flux.eotTimeoutMs,
+    });
+    return `${WS_BASE_URL}${FLUX_PATH}?${query}`;
+  }
+}
+
+// ---------------------------------------------------------------------------
+// Helpers
+// ---------------------------------------------------------------------------
+
+/**
+ * Map a WebSocket close code onto a normalized STT error category, matching
+ * how `DeepgramRealtimeTranscriber` classifies the same codes: 1008 (policy
+ * violation) and 4001 are how Deepgram rejects credentials, and 1013 (try
+ * again later) is how it sheds load.
+ */
+function closeCodeCategory(code: number): SttErrorCategory {
+  if (code === 1008 || code === 4001) {
+    return "auth";
+  }
+  if (code === 1013) {
+    return "rate-limit";
+  }
+  return "provider-error";
+}
+
+/** Best-effort human-readable text for a WebSocket error event. */
+function describeSocketEvent(ev: unknown): string {
+  if (ev instanceof Error) {
+    return ev.message;
+  }
+  if (typeof ev === "object" && ev !== null && "message" in ev) {
+    return String((ev as { message: unknown }).message);
+  }
+  return "WebSocket error";
+}