@vcmap/ui 5.0.0-rc.9 → 5.0.1

package/dist/assets/cesium/Workers/chunk-JB2LWGH4.js

@@ -0,0 +1,390 @@
+/**
+ * @license
+ * Cesium - https://github.com/CesiumGS/cesium
+ * Version 1.109.3
+ *
+ * Copyright 2011-2022 Cesium Contributors
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * Columbus View (Pat. Pend.)
+ *
+ * Portions licensed separately.
+ * See https://github.com/CesiumGS/cesium/blob/main/LICENSE.md for full licensing details.
+ */
+
+import {
+  EllipseGeometryLibrary_default
+} from "./chunk-QIKODV5G.js";
+import {
+  GeometryOffsetAttribute_default
+} from "./chunk-MPAZH4BF.js";
+import {
+  IndexDatatype_default
+} from "./chunk-RW6LU2CJ.js";
+import {
+  GeometryAttributes_default
+} from "./chunk-EW2GWJYB.js";
+import {
+  GeometryAttribute_default,
+  Geometry_default,
+  PrimitiveType_default
+} from "./chunk-X4SU25DT.js";
+import {
+  BoundingSphere_default
+} from "./chunk-PFQBCKBM.js";
+import {
+  ComponentDatatype_default
+} from "./chunk-LLUNNUJV.js";
+import {
+  Cartesian3_default,
+  Ellipsoid_default
+} from "./chunk-PCJWUS4M.js";
+import {
+  Math_default
+} from "./chunk-N3JIFFX2.js";
+import {
+  defaultValue_default
+} from "./chunk-WXTV4ATB.js";
+import {
+  DeveloperError_default
+} from "./chunk-4MFFIWUA.js";
+import {
+  defined_default
+} from "./chunk-6BTKZDRG.js";
+
+// packages/engine/Source/Core/EllipseOutlineGeometry.js
+var scratchCartesian1 = new Cartesian3_default();
+var boundingSphereCenter = new Cartesian3_default();
+function computeEllipse(options) {
+  const center = options.center;
+  boundingSphereCenter = Cartesian3_default.multiplyByScalar(
+    options.ellipsoid.geodeticSurfaceNormal(center, boundingSphereCenter),
+    options.height,
+    boundingSphereCenter
+  );
+  boundingSphereCenter = Cartesian3_default.add(
+    center,
+    boundingSphereCenter,
+    boundingSphereCenter
+  );
+  const boundingSphere = new BoundingSphere_default(
+    boundingSphereCenter,
+    options.semiMajorAxis
+  );
+  const positions = EllipseGeometryLibrary_default.computeEllipsePositions(
+    options,
+    false,
+    true
+  ).outerPositions;
+  const attributes = new GeometryAttributes_default({
+    position: new GeometryAttribute_default({
+      componentDatatype: ComponentDatatype_default.DOUBLE,
+      componentsPerAttribute: 3,
+      values: EllipseGeometryLibrary_default.raisePositionsToHeight(
+        positions,
+        options,
+        false
+      )
+    })
+  });
+  const length = positions.length / 3;
+  const indices = IndexDatatype_default.createTypedArray(length, length * 2);
+  let index = 0;
+  for (let i = 0; i < length; ++i) {
+    indices[index++] = i;
+    indices[index++] = (i + 1) % length;
+  }
+  return {
+    boundingSphere,
+    attributes,
+    indices
+  };
+}
+var topBoundingSphere = new BoundingSphere_default();
+var bottomBoundingSphere = new BoundingSphere_default();
+function computeExtrudedEllipse(options) {
+  const center = options.center;
+  const ellipsoid = options.ellipsoid;
+  const semiMajorAxis = options.semiMajorAxis;
+  let scaledNormal = Cartesian3_default.multiplyByScalar(
+    ellipsoid.geodeticSurfaceNormal(center, scratchCartesian1),
+    options.height,
+    scratchCartesian1
+  );
+  topBoundingSphere.center = Cartesian3_default.add(
+    center,
+    scaledNormal,
+    topBoundingSphere.center
+  );
+  topBoundingSphere.radius = semiMajorAxis;
+  scaledNormal = Cartesian3_default.multiplyByScalar(
+    ellipsoid.geodeticSurfaceNormal(center, scaledNormal),
+    options.extrudedHeight,
+    scaledNormal
+  );
+  bottomBoundingSphere.center = Cartesian3_default.add(
+    center,
+    scaledNormal,
+    bottomBoundingSphere.center
+  );
+  bottomBoundingSphere.radius = semiMajorAxis;
+  let positions = EllipseGeometryLibrary_default.computeEllipsePositions(
+    options,
+    false,
+    true
+  ).outerPositions;
+  const attributes = new GeometryAttributes_default({
+    position: new GeometryAttribute_default({
+      componentDatatype: ComponentDatatype_default.DOUBLE,
+      componentsPerAttribute: 3,
+      values: EllipseGeometryLibrary_default.raisePositionsToHeight(
+        positions,
+        options,
+        true
+      )
+    })
+  });
+  positions = attributes.position.values;
+  const boundingSphere = BoundingSphere_default.union(
+    topBoundingSphere,
+    bottomBoundingSphere
+  );
+  let length = positions.length / 3;
+  if (defined_default(options.offsetAttribute)) {
+    let applyOffset = new Uint8Array(length);
+    if (options.offsetAttribute === GeometryOffsetAttribute_default.TOP) {
+      applyOffset = applyOffset.fill(1, 0, length / 2);
+    } else {
+      const offsetValue = options.offsetAttribute === GeometryOffsetAttribute_default.NONE ? 0 : 1;
+      applyOffset = applyOffset.fill(offsetValue);
+    }
+    attributes.applyOffset = new GeometryAttribute_default({
+      componentDatatype: ComponentDatatype_default.UNSIGNED_BYTE,
+      componentsPerAttribute: 1,
+      values: applyOffset
+    });
+  }
+  let numberOfVerticalLines = defaultValue_default(options.numberOfVerticalLines, 16);
+  numberOfVerticalLines = Math_default.clamp(
+    numberOfVerticalLines,
+    0,
+    length / 2
+  );
+  const indices = IndexDatatype_default.createTypedArray(
+    length,
+    length * 2 + numberOfVerticalLines * 2
+  );
+  length /= 2;
+  let index = 0;
+  let i;
+  for (i = 0; i < length; ++i) {
+    indices[index++] = i;
+    indices[index++] = (i + 1) % length;
+    indices[index++] = i + length;
+    indices[index++] = (i + 1) % length + length;
+  }
+  let numSide;
+  if (numberOfVerticalLines > 0) {
+    const numSideLines = Math.min(numberOfVerticalLines, length);
+    numSide = Math.round(length / numSideLines);
+    const maxI = Math.min(numSide * numberOfVerticalLines, length);
+    for (i = 0; i < maxI; i += numSide) {
+      indices[index++] = i;
+      indices[index++] = i + length;
+    }
+  }
+  return {
+    boundingSphere,
+    attributes,
+    indices
+  };
+}
+function EllipseOutlineGeometry(options) {
+  options = defaultValue_default(options, defaultValue_default.EMPTY_OBJECT);
+  const center = options.center;
+  const ellipsoid = defaultValue_default(options.ellipsoid, Ellipsoid_default.WGS84);
+  const semiMajorAxis = options.semiMajorAxis;
+  const semiMinorAxis = options.semiMinorAxis;
+  const granularity = defaultValue_default(
+    options.granularity,
+    Math_default.RADIANS_PER_DEGREE
+  );
+  if (!defined_default(center)) {
+    throw new DeveloperError_default("center is required.");
+  }
+  if (!defined_default(semiMajorAxis)) {
+    throw new DeveloperError_default("semiMajorAxis is required.");
+  }
+  if (!defined_default(semiMinorAxis)) {
+    throw new DeveloperError_default("semiMinorAxis is required.");
+  }
+  if (semiMajorAxis < semiMinorAxis) {
+    throw new DeveloperError_default(
+      "semiMajorAxis must be greater than or equal to the semiMinorAxis."
+    );
+  }
+  if (granularity <= 0) {
+    throw new DeveloperError_default("granularity must be greater than zero.");
+  }
+  const height = defaultValue_default(options.height, 0);
+  const extrudedHeight = defaultValue_default(options.extrudedHeight, height);
+  this._center = Cartesian3_default.clone(center);
+  this._semiMajorAxis = semiMajorAxis;
+  this._semiMinorAxis = semiMinorAxis;
+  this._ellipsoid = Ellipsoid_default.clone(ellipsoid);
+  this._rotation = defaultValue_default(options.rotation, 0);
+  this._height = Math.max(extrudedHeight, height);
+  this._granularity = granularity;
+  this._extrudedHeight = Math.min(extrudedHeight, height);
+  this._numberOfVerticalLines = Math.max(
+    defaultValue_default(options.numberOfVerticalLines, 16),
+    0
+  );
+  this._offsetAttribute = options.offsetAttribute;
+  this._workerName = "createEllipseOutlineGeometry";
+}
+EllipseOutlineGeometry.packedLength = Cartesian3_default.packedLength + Ellipsoid_default.packedLength + 8;
+EllipseOutlineGeometry.pack = function(value, array, startingIndex) {
+  if (!defined_default(value)) {
+    throw new DeveloperError_default("value is required");
+  }
+  if (!defined_default(array)) {
+    throw new DeveloperError_default("array is required");
+  }
+  startingIndex = defaultValue_default(startingIndex, 0);
+  Cartesian3_default.pack(value._center, array, startingIndex);
+  startingIndex += Cartesian3_default.packedLength;
+  Ellipsoid_default.pack(value._ellipsoid, array, startingIndex);
+  startingIndex += Ellipsoid_default.packedLength;
+  array[startingIndex++] = value._semiMajorAxis;
+  array[startingIndex++] = value._semiMinorAxis;
+  array[startingIndex++] = value._rotation;
+  array[startingIndex++] = value._height;
+  array[startingIndex++] = value._granularity;
+  array[startingIndex++] = value._extrudedHeight;
+  array[startingIndex++] = value._numberOfVerticalLines;
+  array[startingIndex] = defaultValue_default(value._offsetAttribute, -1);
+  return array;
+};
+var scratchCenter = new Cartesian3_default();
+var scratchEllipsoid = new Ellipsoid_default();
+var scratchOptions = {
+  center: scratchCenter,
+  ellipsoid: scratchEllipsoid,
+  semiMajorAxis: void 0,
+  semiMinorAxis: void 0,
+  rotation: void 0,
+  height: void 0,
+  granularity: void 0,
+  extrudedHeight: void 0,
+  numberOfVerticalLines: void 0,
+  offsetAttribute: void 0
+};
+EllipseOutlineGeometry.unpack = function(array, startingIndex, result) {
+  if (!defined_default(array)) {
+    throw new DeveloperError_default("array is required");
+  }
+  startingIndex = defaultValue_default(startingIndex, 0);
+  const center = Cartesian3_default.unpack(array, startingIndex, scratchCenter);
+  startingIndex += Cartesian3_default.packedLength;
+  const ellipsoid = Ellipsoid_default.unpack(array, startingIndex, scratchEllipsoid);
+  startingIndex += Ellipsoid_default.packedLength;
+  const semiMajorAxis = array[startingIndex++];
+  const semiMinorAxis = array[startingIndex++];
+  const rotation = array[startingIndex++];
+  const height = array[startingIndex++];
+  const granularity = array[startingIndex++];
+  const extrudedHeight = array[startingIndex++];
+  const numberOfVerticalLines = array[startingIndex++];
+  const offsetAttribute = array[startingIndex];
+  if (!defined_default(result)) {
+    scratchOptions.height = height;
+    scratchOptions.extrudedHeight = extrudedHeight;
+    scratchOptions.granularity = granularity;
+    scratchOptions.rotation = rotation;
+    scratchOptions.semiMajorAxis = semiMajorAxis;
+    scratchOptions.semiMinorAxis = semiMinorAxis;
+    scratchOptions.numberOfVerticalLines = numberOfVerticalLines;
+    scratchOptions.offsetAttribute = offsetAttribute === -1 ? void 0 : offsetAttribute;
+    return new EllipseOutlineGeometry(scratchOptions);
+  }
+  result._center = Cartesian3_default.clone(center, result._center);
+  result._ellipsoid = Ellipsoid_default.clone(ellipsoid, result._ellipsoid);
+  result._semiMajorAxis = semiMajorAxis;
+  result._semiMinorAxis = semiMinorAxis;
+  result._rotation = rotation;
+  result._height = height;
+  result._granularity = granularity;
+  result._extrudedHeight = extrudedHeight;
+  result._numberOfVerticalLines = numberOfVerticalLines;
+  result._offsetAttribute = offsetAttribute === -1 ? void 0 : offsetAttribute;
+  return result;
+};
+EllipseOutlineGeometry.createGeometry = function(ellipseGeometry) {
+  if (ellipseGeometry._semiMajorAxis <= 0 || ellipseGeometry._semiMinorAxis <= 0) {
+    return;
+  }
+  const height = ellipseGeometry._height;
+  const extrudedHeight = ellipseGeometry._extrudedHeight;
+  const extrude = !Math_default.equalsEpsilon(
+    height,
+    extrudedHeight,
+    0,
+    Math_default.EPSILON2
+  );
+  ellipseGeometry._center = ellipseGeometry._ellipsoid.scaleToGeodeticSurface(
+    ellipseGeometry._center,
+    ellipseGeometry._center
+  );
+  const options = {
+    center: ellipseGeometry._center,
+    semiMajorAxis: ellipseGeometry._semiMajorAxis,
+    semiMinorAxis: ellipseGeometry._semiMinorAxis,
+    ellipsoid: ellipseGeometry._ellipsoid,
+    rotation: ellipseGeometry._rotation,
+    height,
+    granularity: ellipseGeometry._granularity,
+    numberOfVerticalLines: ellipseGeometry._numberOfVerticalLines
+  };
+  let geometry;
+  if (extrude) {
+    options.extrudedHeight = extrudedHeight;
+    options.offsetAttribute = ellipseGeometry._offsetAttribute;
+    geometry = computeExtrudedEllipse(options);
+  } else {
+    geometry = computeEllipse(options);
+    if (defined_default(ellipseGeometry._offsetAttribute)) {
+      const length = geometry.attributes.position.values.length;
+      const offsetValue = ellipseGeometry._offsetAttribute === GeometryOffsetAttribute_default.NONE ? 0 : 1;
+      const applyOffset = new Uint8Array(length / 3).fill(offsetValue);
+      geometry.attributes.applyOffset = new GeometryAttribute_default({
+        componentDatatype: ComponentDatatype_default.UNSIGNED_BYTE,
+        componentsPerAttribute: 1,
+        values: applyOffset
+      });
+    }
+  }
+  return new Geometry_default({
+    attributes: geometry.attributes,
+    indices: geometry.indices,
+    primitiveType: PrimitiveType_default.LINES,
+    boundingSphere: geometry.boundingSphere,
+    offsetAttribute: ellipseGeometry._offsetAttribute
+  });
+};
+var EllipseOutlineGeometry_default = EllipseOutlineGeometry;
+
+export {
+  EllipseOutlineGeometry_default
+};