@vcmap/ui 5.0.0-rc.30 → 5.0.0-rc.31

package/dist/assets/cesium/Workers/EllipsoidGeometry-cb148ca2.js

@@ -1,637 +0,0 @@
-define(['exports', './Transforms-a2a85221', './Matrix2-e1298525', './Matrix3-41c58dde', './ComponentDatatype-cf1fa08e', './defaultValue-fe22d8c0', './Check-6ede7e26', './GeometryAttribute-ff5b4fb1', './GeometryAttributes-ad136444', './GeometryOffsetAttribute-9ad0019c', './IndexDatatype-2643aa47', './Math-0a2ac845', './VertexFormat-030f11ff'], (function (exports, Transforms, Matrix2, Matrix3, ComponentDatatype, defaultValue, Check, GeometryAttribute, GeometryAttributes, GeometryOffsetAttribute, IndexDatatype, Math$1, VertexFormat) { 'use strict';
-
-  const scratchPosition = new Matrix3.Cartesian3();
-  const scratchNormal = new Matrix3.Cartesian3();
-  const scratchTangent = new Matrix3.Cartesian3();
-  const scratchBitangent = new Matrix3.Cartesian3();
-  const scratchNormalST = new Matrix3.Cartesian3();
-  const defaultRadii = new Matrix3.Cartesian3(1.0, 1.0, 1.0);
-
-  const cos = Math.cos;
-  const sin = Math.sin;
-
-  /**
-   * A description of an ellipsoid centered at the origin.
-   *
-   * @alias EllipsoidGeometry
-   * @constructor
-   *
-   * @param {object} [options] Object with the following properties:
-   * @param {Cartesian3} [options.radii=Cartesian3(1.0, 1.0, 1.0)] The radii of the ellipsoid in the x, y, and z directions.
-   * @param {Cartesian3} [options.innerRadii=options.radii] The inner radii of the ellipsoid in the x, y, and z directions.
-   * @param {number} [options.minimumClock=0.0] The minimum angle lying in the xy-plane measured from the positive x-axis and toward the positive y-axis.
-   * @param {number} [options.maximumClock=2*PI] The maximum angle lying in the xy-plane measured from the positive x-axis and toward the positive y-axis.
-   * @param {number} [options.minimumCone=0.0] The minimum angle measured from the positive z-axis and toward the negative z-axis.
-   * @param {number} [options.maximumCone=PI] The maximum angle measured from the positive z-axis and toward the negative z-axis.
-   * @param {number} [options.stackPartitions=64] The number of times to partition the ellipsoid into stacks.
-   * @param {number} [options.slicePartitions=64] The number of times to partition the ellipsoid into radial slices.
-   * @param {VertexFormat} [options.vertexFormat=VertexFormat.DEFAULT] The vertex attributes to be computed.
-   *
-   * @exception {DeveloperError} options.slicePartitions cannot be less than three.
-   * @exception {DeveloperError} options.stackPartitions cannot be less than three.
-   *
-   * @see EllipsoidGeometry#createGeometry
-   *
-   * @example
-   * const ellipsoid = new Cesium.EllipsoidGeometry({
-   *   vertexFormat : Cesium.VertexFormat.POSITION_ONLY,
-   *   radii : new Cesium.Cartesian3(1000000.0, 500000.0, 500000.0)
-   * });
-   * const geometry = Cesium.EllipsoidGeometry.createGeometry(ellipsoid);
-   */
-  function EllipsoidGeometry(options) {
-    options = defaultValue.defaultValue(options, defaultValue.defaultValue.EMPTY_OBJECT);
-
-    const radii = defaultValue.defaultValue(options.radii, defaultRadii);
-    const innerRadii = defaultValue.defaultValue(options.innerRadii, radii);
-    const minimumClock = defaultValue.defaultValue(options.minimumClock, 0.0);
-    const maximumClock = defaultValue.defaultValue(options.maximumClock, Math$1.CesiumMath.TWO_PI);
-    const minimumCone = defaultValue.defaultValue(options.minimumCone, 0.0);
-    const maximumCone = defaultValue.defaultValue(options.maximumCone, Math$1.CesiumMath.PI);
-    const stackPartitions = Math.round(defaultValue.defaultValue(options.stackPartitions, 64));
-    const slicePartitions = Math.round(defaultValue.defaultValue(options.slicePartitions, 64));
-    const vertexFormat = defaultValue.defaultValue(options.vertexFormat, VertexFormat.VertexFormat.DEFAULT);
-
-    //>>includeStart('debug', pragmas.debug);
-    if (slicePartitions < 3) {
-      throw new Check.DeveloperError(
-        "options.slicePartitions cannot be less than three."
-      );
-    }
-    if (stackPartitions < 3) {
-      throw new Check.DeveloperError(
-        "options.stackPartitions cannot be less than three."
-      );
-    }
-    //>>includeEnd('debug');
-
-    this._radii = Matrix3.Cartesian3.clone(radii);
-    this._innerRadii = Matrix3.Cartesian3.clone(innerRadii);
-    this._minimumClock = minimumClock;
-    this._maximumClock = maximumClock;
-    this._minimumCone = minimumCone;
-    this._maximumCone = maximumCone;
-    this._stackPartitions = stackPartitions;
-    this._slicePartitions = slicePartitions;
-    this._vertexFormat = VertexFormat.VertexFormat.clone(vertexFormat);
-    this._offsetAttribute = options.offsetAttribute;
-    this._workerName = "createEllipsoidGeometry";
-  }
-
-  /**
-   * The number of elements used to pack the object into an array.
-   * @type {number}
-   */
-  EllipsoidGeometry.packedLength =
-    2 * Matrix3.Cartesian3.packedLength + VertexFormat.VertexFormat.packedLength + 7;
-
-  /**
-   * Stores the provided instance into the provided array.
-   *
-   * @param {EllipsoidGeometry} value The value to pack.
-   * @param {number[]} array The array to pack into.
-   * @param {number} [startingIndex=0] The index into the array at which to start packing the elements.
-   *
-   * @returns {number[]} The array that was packed into
-   */
-  EllipsoidGeometry.pack = function (value, array, startingIndex) {
-    //>>includeStart('debug', pragmas.debug);
-    if (!defaultValue.defined(value)) {
-      throw new Check.DeveloperError("value is required");
-    }
-    if (!defaultValue.defined(array)) {
-      throw new Check.DeveloperError("array is required");
-    }
-    //>>includeEnd('debug');
-
-    startingIndex = defaultValue.defaultValue(startingIndex, 0);
-
-    Matrix3.Cartesian3.pack(value._radii, array, startingIndex);
-    startingIndex += Matrix3.Cartesian3.packedLength;
-
-    Matrix3.Cartesian3.pack(value._innerRadii, array, startingIndex);
-    startingIndex += Matrix3.Cartesian3.packedLength;
-
-    VertexFormat.VertexFormat.pack(value._vertexFormat, array, startingIndex);
-    startingIndex += VertexFormat.VertexFormat.packedLength;
-
-    array[startingIndex++] = value._minimumClock;
-    array[startingIndex++] = value._maximumClock;
-    array[startingIndex++] = value._minimumCone;
-    array[startingIndex++] = value._maximumCone;
-    array[startingIndex++] = value._stackPartitions;
-    array[startingIndex++] = value._slicePartitions;
-    array[startingIndex] = defaultValue.defaultValue(value._offsetAttribute, -1);
-
-    return array;
-  };
-
-  const scratchRadii = new Matrix3.Cartesian3();
-  const scratchInnerRadii = new Matrix3.Cartesian3();
-  const scratchVertexFormat = new VertexFormat.VertexFormat();
-  const scratchOptions = {
-    radii: scratchRadii,
-    innerRadii: scratchInnerRadii,
-    vertexFormat: scratchVertexFormat,
-    minimumClock: undefined,
-    maximumClock: undefined,
-    minimumCone: undefined,
-    maximumCone: undefined,
-    stackPartitions: undefined,
-    slicePartitions: undefined,
-    offsetAttribute: undefined,
-  };
-
-  /**
-   * Retrieves an instance from a packed array.
-   *
-   * @param {number[]} array The packed array.
-   * @param {number} [startingIndex=0] The starting index of the element to be unpacked.
-   * @param {EllipsoidGeometry} [result] The object into which to store the result.
-   * @returns {EllipsoidGeometry} The modified result parameter or a new EllipsoidGeometry instance if one was not provided.
-   */
-  EllipsoidGeometry.unpack = function (array, startingIndex, result) {
-    //>>includeStart('debug', pragmas.debug);
-    if (!defaultValue.defined(array)) {
-      throw new Check.DeveloperError("array is required");
-    }
-    //>>includeEnd('debug');
-
-    startingIndex = defaultValue.defaultValue(startingIndex, 0);
-
-    const radii = Matrix3.Cartesian3.unpack(array, startingIndex, scratchRadii);
-    startingIndex += Matrix3.Cartesian3.packedLength;
-
-    const innerRadii = Matrix3.Cartesian3.unpack(array, startingIndex, scratchInnerRadii);
-    startingIndex += Matrix3.Cartesian3.packedLength;
-
-    const vertexFormat = VertexFormat.VertexFormat.unpack(
-      array,
-      startingIndex,
-      scratchVertexFormat
-    );
-    startingIndex += VertexFormat.VertexFormat.packedLength;
-
-    const minimumClock = array[startingIndex++];
-    const maximumClock = array[startingIndex++];
-    const minimumCone = array[startingIndex++];
-    const maximumCone = array[startingIndex++];
-    const stackPartitions = array[startingIndex++];
-    const slicePartitions = array[startingIndex++];
-    const offsetAttribute = array[startingIndex];
-
-    if (!defaultValue.defined(result)) {
-      scratchOptions.minimumClock = minimumClock;
-      scratchOptions.maximumClock = maximumClock;
-      scratchOptions.minimumCone = minimumCone;
-      scratchOptions.maximumCone = maximumCone;
-      scratchOptions.stackPartitions = stackPartitions;
-      scratchOptions.slicePartitions = slicePartitions;
-      scratchOptions.offsetAttribute =
-        offsetAttribute === -1 ? undefined : offsetAttribute;
-      return new EllipsoidGeometry(scratchOptions);
-    }
-
-    result._radii = Matrix3.Cartesian3.clone(radii, result._radii);
-    result._innerRadii = Matrix3.Cartesian3.clone(innerRadii, result._innerRadii);
-    result._vertexFormat = VertexFormat.VertexFormat.clone(vertexFormat, result._vertexFormat);
-    result._minimumClock = minimumClock;
-    result._maximumClock = maximumClock;
-    result._minimumCone = minimumCone;
-    result._maximumCone = maximumCone;
-    result._stackPartitions = stackPartitions;
-    result._slicePartitions = slicePartitions;
-    result._offsetAttribute =
-      offsetAttribute === -1 ? undefined : offsetAttribute;
-
-    return result;
-  };
-
-  /**
-   * Computes the geometric representation of an ellipsoid, including its vertices, indices, and a bounding sphere.
-   *
-   * @param {EllipsoidGeometry} ellipsoidGeometry A description of the ellipsoid.
-   * @returns {Geometry|undefined} The computed vertices and indices.
-   */
-  EllipsoidGeometry.createGeometry = function (ellipsoidGeometry) {
-    const radii = ellipsoidGeometry._radii;
-    if (radii.x <= 0 || radii.y <= 0 || radii.z <= 0) {
-      return;
-    }
-
-    const innerRadii = ellipsoidGeometry._innerRadii;
-    if (innerRadii.x <= 0 || innerRadii.y <= 0 || innerRadii.z <= 0) {
-      return;
-    }
-
-    const minimumClock = ellipsoidGeometry._minimumClock;
-    const maximumClock = ellipsoidGeometry._maximumClock;
-    const minimumCone = ellipsoidGeometry._minimumCone;
-    const maximumCone = ellipsoidGeometry._maximumCone;
-    const vertexFormat = ellipsoidGeometry._vertexFormat;
-
-    // Add an extra slice and stack so that the number of partitions is the
-    // number of surfaces rather than the number of joints
-    let slicePartitions = ellipsoidGeometry._slicePartitions + 1;
-    let stackPartitions = ellipsoidGeometry._stackPartitions + 1;
-
-    slicePartitions = Math.round(
-      (slicePartitions * Math.abs(maximumClock - minimumClock)) /
-        Math$1.CesiumMath.TWO_PI
-    );
-    stackPartitions = Math.round(
-      (stackPartitions * Math.abs(maximumCone - minimumCone)) / Math$1.CesiumMath.PI
-    );
-
-    if (slicePartitions < 2) {
-      slicePartitions = 2;
-    }
-    if (stackPartitions < 2) {
-      stackPartitions = 2;
-    }
-
-    let i;
-    let j;
-    let index = 0;
-
-    // Create arrays for theta and phi. Duplicate first and last angle to
-    // allow different normals at the intersections.
-    const phis = [minimumCone];
-    const thetas = [minimumClock];
-    for (i = 0; i < stackPartitions; i++) {
-      phis.push(
-        minimumCone + (i * (maximumCone - minimumCone)) / (stackPartitions - 1)
-      );
-    }
-    phis.push(maximumCone);
-    for (j = 0; j < slicePartitions; j++) {
-      thetas.push(
-        minimumClock + (j * (maximumClock - minimumClock)) / (slicePartitions - 1)
-      );
-    }
-    thetas.push(maximumClock);
-    const numPhis = phis.length;
-    const numThetas = thetas.length;
-
-    // Allow for extra indices if there is an inner surface and if we need
-    // to close the sides if the clock range is not a full circle
-    let extraIndices = 0;
-    let vertexMultiplier = 1.0;
-    const hasInnerSurface =
-      innerRadii.x !== radii.x ||
-      innerRadii.y !== radii.y ||
-      innerRadii.z !== radii.z;
-    let isTopOpen = false;
-    let isBotOpen = false;
-    let isClockOpen = false;
-    if (hasInnerSurface) {
-      vertexMultiplier = 2.0;
-      if (minimumCone > 0.0) {
-        isTopOpen = true;
-        extraIndices += slicePartitions - 1;
-      }
-      if (maximumCone < Math.PI) {
-        isBotOpen = true;
-        extraIndices += slicePartitions - 1;
-      }
-      if ((maximumClock - minimumClock) % Math$1.CesiumMath.TWO_PI) {
-        isClockOpen = true;
-        extraIndices += (stackPartitions - 1) * 2 + 1;
-      } else {
-        extraIndices += 1;
-      }
-    }
-
-    const vertexCount = numThetas * numPhis * vertexMultiplier;
-    const positions = new Float64Array(vertexCount * 3);
-    const isInner = new Array(vertexCount).fill(false);
-    const negateNormal = new Array(vertexCount).fill(false);
-
-    // Multiply by 6 because there are two triangles per sector
-    const indexCount = slicePartitions * stackPartitions * vertexMultiplier;
-    const numIndices =
-      6 *
-      (indexCount +
-        extraIndices +
-        1 -
-        (slicePartitions + stackPartitions) * vertexMultiplier);
-    const indices = IndexDatatype.IndexDatatype.createTypedArray(indexCount, numIndices);
-
-    const normals = vertexFormat.normal
-      ? new Float32Array(vertexCount * 3)
-      : undefined;
-    const tangents = vertexFormat.tangent
-      ? new Float32Array(vertexCount * 3)
-      : undefined;
-    const bitangents = vertexFormat.bitangent
-      ? new Float32Array(vertexCount * 3)
-      : undefined;
-    const st = vertexFormat.st ? new Float32Array(vertexCount * 2) : undefined;
-
-    // Calculate sin/cos phi
-    const sinPhi = new Array(numPhis);
-    const cosPhi = new Array(numPhis);
-    for (i = 0; i < numPhis; i++) {
-      sinPhi[i] = sin(phis[i]);
-      cosPhi[i] = cos(phis[i]);
-    }
-
-    // Calculate sin/cos theta
-    const sinTheta = new Array(numThetas);
-    const cosTheta = new Array(numThetas);
-    for (j = 0; j < numThetas; j++) {
-      cosTheta[j] = cos(thetas[j]);
-      sinTheta[j] = sin(thetas[j]);
-    }
-
-    // Create outer surface
-    for (i = 0; i < numPhis; i++) {
-      for (j = 0; j < numThetas; j++) {
-        positions[index++] = radii.x * sinPhi[i] * cosTheta[j];
-        positions[index++] = radii.y * sinPhi[i] * sinTheta[j];
-        positions[index++] = radii.z * cosPhi[i];
-      }
-    }
-
-    // Create inner surface
-    let vertexIndex = vertexCount / 2.0;
-    if (hasInnerSurface) {
-      for (i = 0; i < numPhis; i++) {
-        for (j = 0; j < numThetas; j++) {
-          positions[index++] = innerRadii.x * sinPhi[i] * cosTheta[j];
-          positions[index++] = innerRadii.y * sinPhi[i] * sinTheta[j];
-          positions[index++] = innerRadii.z * cosPhi[i];
-
-          // Keep track of which vertices are the inner and which ones
-          // need the normal to be negated
-          isInner[vertexIndex] = true;
-          if (i > 0 && i !== numPhis - 1 && j !== 0 && j !== numThetas - 1) {
-            negateNormal[vertexIndex] = true;
-          }
-          vertexIndex++;
-        }
-      }
-    }
-
-    // Create indices for outer surface
-    index = 0;
-    let topOffset;
-    let bottomOffset;
-    for (i = 1; i < numPhis - 2; i++) {
-      topOffset = i * numThetas;
-      bottomOffset = (i + 1) * numThetas;
-
-      for (j = 1; j < numThetas - 2; j++) {
-        indices[index++] = bottomOffset + j;
-        indices[index++] = bottomOffset + j + 1;
-        indices[index++] = topOffset + j + 1;
-
-        indices[index++] = bottomOffset + j;
-        indices[index++] = topOffset + j + 1;
-        indices[index++] = topOffset + j;
-      }
-    }
-
-    // Create indices for inner surface
-    if (hasInnerSurface) {
-      const offset = numPhis * numThetas;
-      for (i = 1; i < numPhis - 2; i++) {
-        topOffset = offset + i * numThetas;
-        bottomOffset = offset + (i + 1) * numThetas;
-
-        for (j = 1; j < numThetas - 2; j++) {
-          indices[index++] = bottomOffset + j;
-          indices[index++] = topOffset + j;
-          indices[index++] = topOffset + j + 1;
-
-          indices[index++] = bottomOffset + j;
-          indices[index++] = topOffset + j + 1;
-          indices[index++] = bottomOffset + j + 1;
-        }
-      }
-    }
-
-    let outerOffset;
-    let innerOffset;
-    if (hasInnerSurface) {
-      if (isTopOpen) {
-        // Connect the top of the inner surface to the top of the outer surface
-        innerOffset = numPhis * numThetas;
-        for (i = 1; i < numThetas - 2; i++) {
-          indices[index++] = i;
-          indices[index++] = i + 1;
-          indices[index++] = innerOffset + i + 1;
-
-          indices[index++] = i;
-          indices[index++] = innerOffset + i + 1;
-          indices[index++] = innerOffset + i;
-        }
-      }
-
-      if (isBotOpen) {
-        // Connect the bottom of the inner surface to the bottom of the outer surface
-        outerOffset = numPhis * numThetas - numThetas;
-        innerOffset = numPhis * numThetas * vertexMultiplier - numThetas;
-        for (i = 1; i < numThetas - 2; i++) {
-          indices[index++] = outerOffset + i + 1;
-          indices[index++] = outerOffset + i;
-          indices[index++] = innerOffset + i;
-
-          indices[index++] = outerOffset + i + 1;
-          indices[index++] = innerOffset + i;
-          indices[index++] = innerOffset + i + 1;
-        }
-      }
-    }
-
-    // Connect the edges if clock is not closed
-    if (isClockOpen) {
-      for (i = 1; i < numPhis - 2; i++) {
-        innerOffset = numThetas * numPhis + numThetas * i;
-        outerOffset = numThetas * i;
-        indices[index++] = innerOffset;
-        indices[index++] = outerOffset + numThetas;
-        indices[index++] = outerOffset;
-
-        indices[index++] = innerOffset;
-        indices[index++] = innerOffset + numThetas;
-        indices[index++] = outerOffset + numThetas;
-      }
-
-      for (i = 1; i < numPhis - 2; i++) {
-        innerOffset = numThetas * numPhis + numThetas * (i + 1) - 1;
-        outerOffset = numThetas * (i + 1) - 1;
-        indices[index++] = outerOffset + numThetas;
-        indices[index++] = innerOffset;
-        indices[index++] = outerOffset;
-
-        indices[index++] = outerOffset + numThetas;
-        indices[index++] = innerOffset + numThetas;
-        indices[index++] = innerOffset;
-      }
-    }
-
-    const attributes = new GeometryAttributes.GeometryAttributes();
-
-    if (vertexFormat.position) {
-      attributes.position = new GeometryAttribute.GeometryAttribute({
-        componentDatatype: ComponentDatatype.ComponentDatatype.DOUBLE,
-        componentsPerAttribute: 3,
-        values: positions,
-      });
-    }
-
-    let stIndex = 0;
-    let normalIndex = 0;
-    let tangentIndex = 0;
-    let bitangentIndex = 0;
-    const vertexCountHalf = vertexCount / 2.0;
-
-    let ellipsoid;
-    const ellipsoidOuter = Matrix3.Ellipsoid.fromCartesian3(radii);
-    const ellipsoidInner = Matrix3.Ellipsoid.fromCartesian3(innerRadii);
-
-    if (
-      vertexFormat.st ||
-      vertexFormat.normal ||
-      vertexFormat.tangent ||
-      vertexFormat.bitangent
-    ) {
-      for (i = 0; i < vertexCount; i++) {
-        ellipsoid = isInner[i] ? ellipsoidInner : ellipsoidOuter;
-        const position = Matrix3.Cartesian3.fromArray(positions, i * 3, scratchPosition);
-        const normal = ellipsoid.geodeticSurfaceNormal(position, scratchNormal);
-        if (negateNormal[i]) {
-          Matrix3.Cartesian3.negate(normal, normal);
-        }
-
-        if (vertexFormat.st) {
-          const normalST = Matrix2.Cartesian2.negate(normal, scratchNormalST);
-          st[stIndex++] =
-            Math.atan2(normalST.y, normalST.x) / Math$1.CesiumMath.TWO_PI + 0.5;
-          st[stIndex++] = Math.asin(normal.z) / Math.PI + 0.5;
-        }
-
-        if (vertexFormat.normal) {
-          normals[normalIndex++] = normal.x;
-          normals[normalIndex++] = normal.y;
-          normals[normalIndex++] = normal.z;
-        }
-
-        if (vertexFormat.tangent || vertexFormat.bitangent) {
-          const tangent = scratchTangent;
-
-          // Use UNIT_X for the poles
-          let tangetOffset = 0;
-          let unit;
-          if (isInner[i]) {
-            tangetOffset = vertexCountHalf;
-          }
-          if (
-            !isTopOpen &&
-            i >= tangetOffset &&
-            i < tangetOffset + numThetas * 2
-          ) {
-            unit = Matrix3.Cartesian3.UNIT_X;
-          } else {
-            unit = Matrix3.Cartesian3.UNIT_Z;
-          }
-          Matrix3.Cartesian3.cross(unit, normal, tangent);
-          Matrix3.Cartesian3.normalize(tangent, tangent);
-
-          if (vertexFormat.tangent) {
-            tangents[tangentIndex++] = tangent.x;
-            tangents[tangentIndex++] = tangent.y;
-            tangents[tangentIndex++] = tangent.z;
-          }
-
-          if (vertexFormat.bitangent) {
-            const bitangent = Matrix3.Cartesian3.cross(normal, tangent, scratchBitangent);
-            Matrix3.Cartesian3.normalize(bitangent, bitangent);
-
-            bitangents[bitangentIndex++] = bitangent.x;
-            bitangents[bitangentIndex++] = bitangent.y;
-            bitangents[bitangentIndex++] = bitangent.z;
-          }
-        }
-      }
-
-      if (vertexFormat.st) {
-        attributes.st = new GeometryAttribute.GeometryAttribute({
-          componentDatatype: ComponentDatatype.ComponentDatatype.FLOAT,
-          componentsPerAttribute: 2,
-          values: st,
-        });
-      }
-
-      if (vertexFormat.normal) {
-        attributes.normal = new GeometryAttribute.GeometryAttribute({
-          componentDatatype: ComponentDatatype.ComponentDatatype.FLOAT,
-          componentsPerAttribute: 3,
-          values: normals,
-        });
-      }
-
-      if (vertexFormat.tangent) {
-        attributes.tangent = new GeometryAttribute.GeometryAttribute({
-          componentDatatype: ComponentDatatype.ComponentDatatype.FLOAT,
-          componentsPerAttribute: 3,
-          values: tangents,
-        });
-      }
-
-      if (vertexFormat.bitangent) {
-        attributes.bitangent = new GeometryAttribute.GeometryAttribute({
-          componentDatatype: ComponentDatatype.ComponentDatatype.FLOAT,
-          componentsPerAttribute: 3,
-          values: bitangents,
-        });
-      }
-    }
-
-    if (defaultValue.defined(ellipsoidGeometry._offsetAttribute)) {
-      const length = positions.length;
-      const offsetValue =
-        ellipsoidGeometry._offsetAttribute === GeometryOffsetAttribute.GeometryOffsetAttribute.NONE
-          ? 0
-          : 1;
-      const applyOffset = new Uint8Array(length / 3).fill(offsetValue);
-      attributes.applyOffset = new GeometryAttribute.GeometryAttribute({
-        componentDatatype: ComponentDatatype.ComponentDatatype.UNSIGNED_BYTE,
-        componentsPerAttribute: 1,
-        values: applyOffset,
-      });
-    }
-
-    return new GeometryAttribute.Geometry({
-      attributes: attributes,
-      indices: indices,
-      primitiveType: GeometryAttribute.PrimitiveType.TRIANGLES,
-      boundingSphere: Transforms.BoundingSphere.fromEllipsoid(ellipsoidOuter),
-      offsetAttribute: ellipsoidGeometry._offsetAttribute,
-    });
-  };
-
-  let unitEllipsoidGeometry;
-
-  /**
-   * Returns the geometric representation of a unit ellipsoid, including its vertices, indices, and a bounding sphere.
-   * @returns {Geometry} The computed vertices and indices.
-   *
-   * @private
-   */
-  EllipsoidGeometry.getUnitEllipsoid = function () {
-    if (!defaultValue.defined(unitEllipsoidGeometry)) {
-      unitEllipsoidGeometry = EllipsoidGeometry.createGeometry(
-        new EllipsoidGeometry({
-          radii: new Matrix3.Cartesian3(1.0, 1.0, 1.0),
-          vertexFormat: VertexFormat.VertexFormat.POSITION_ONLY,
-        })
-      );
-    }
-    return unitEllipsoidGeometry;
-  };
-
-  exports.EllipsoidGeometry = EllipsoidGeometry;
-
-}));