@vcmap/ui 5.0.0-rc.17 → 5.0.0-rc.20

package/dist/assets/cesium/Workers/EllipsoidGeometry-21c0e3a5.js

@@ -0,0 +1,637 @@
+define(['exports', './Transforms-40229881', './Matrix2-13178034', './Matrix3-315394f6', './ComponentDatatype-f7b11d02', './defaultValue-0a909f67', './Check-666ab1a0', './GeometryAttribute-7d6f1732', './GeometryAttributes-f06a2792', './GeometryOffsetAttribute-04332ce7', './IndexDatatype-a55ceaa1', './Math-2dbd6b93', './VertexFormat-6b480673'], (function (exports, Transforms, Matrix2, Matrix3, ComponentDatatype, defaultValue, Check, GeometryAttribute, GeometryAttributes, GeometryOffsetAttribute, IndexDatatype, Math$1, VertexFormat) { 'use strict';
+
+  const scratchPosition = new Matrix3.Cartesian3();
+  const scratchNormal = new Matrix3.Cartesian3();
+  const scratchTangent = new Matrix3.Cartesian3();
+  const scratchBitangent = new Matrix3.Cartesian3();
+  const scratchNormalST = new Matrix3.Cartesian3();
+  const defaultRadii = new Matrix3.Cartesian3(1.0, 1.0, 1.0);
+
+  const cos = Math.cos;
+  const sin = Math.sin;
+
+  /**
+   * A description of an ellipsoid centered at the origin.
+   *
+   * @alias EllipsoidGeometry
+   * @constructor
+   *
+   * @param {Object} [options] Object with the following properties:
+   * @param {Cartesian3} [options.radii=Cartesian3(1.0, 1.0, 1.0)] The radii of the ellipsoid in the x, y, and z directions.
+   * @param {Cartesian3} [options.innerRadii=options.radii] The inner radii of the ellipsoid in the x, y, and z directions.
+   * @param {Number} [options.minimumClock=0.0] The minimum angle lying in the xy-plane measured from the positive x-axis and toward the positive y-axis.
+   * @param {Number} [options.maximumClock=2*PI] The maximum angle lying in the xy-plane measured from the positive x-axis and toward the positive y-axis.
+   * @param {Number} [options.minimumCone=0.0] The minimum angle measured from the positive z-axis and toward the negative z-axis.
+   * @param {Number} [options.maximumCone=PI] The maximum angle measured from the positive z-axis and toward the negative z-axis.
+   * @param {Number} [options.stackPartitions=64] The number of times to partition the ellipsoid into stacks.
+   * @param {Number} [options.slicePartitions=64] The number of times to partition the ellipsoid into radial slices.
+   * @param {VertexFormat} [options.vertexFormat=VertexFormat.DEFAULT] The vertex attributes to be computed.
+   *
+   * @exception {DeveloperError} options.slicePartitions cannot be less than three.
+   * @exception {DeveloperError} options.stackPartitions cannot be less than three.
+   *
+   * @see EllipsoidGeometry#createGeometry
+   *
+   * @example
+   * const ellipsoid = new Cesium.EllipsoidGeometry({
+   *   vertexFormat : Cesium.VertexFormat.POSITION_ONLY,
+   *   radii : new Cesium.Cartesian3(1000000.0, 500000.0, 500000.0)
+   * });
+   * const geometry = Cesium.EllipsoidGeometry.createGeometry(ellipsoid);
+   */
+  function EllipsoidGeometry(options) {
+    options = defaultValue.defaultValue(options, defaultValue.defaultValue.EMPTY_OBJECT);
+
+    const radii = defaultValue.defaultValue(options.radii, defaultRadii);
+    const innerRadii = defaultValue.defaultValue(options.innerRadii, radii);
+    const minimumClock = defaultValue.defaultValue(options.minimumClock, 0.0);
+    const maximumClock = defaultValue.defaultValue(options.maximumClock, Math$1.CesiumMath.TWO_PI);
+    const minimumCone = defaultValue.defaultValue(options.minimumCone, 0.0);
+    const maximumCone = defaultValue.defaultValue(options.maximumCone, Math$1.CesiumMath.PI);
+    const stackPartitions = Math.round(defaultValue.defaultValue(options.stackPartitions, 64));
+    const slicePartitions = Math.round(defaultValue.defaultValue(options.slicePartitions, 64));
+    const vertexFormat = defaultValue.defaultValue(options.vertexFormat, VertexFormat.VertexFormat.DEFAULT);
+
+    //>>includeStart('debug', pragmas.debug);
+    if (slicePartitions < 3) {
+      throw new Check.DeveloperError(
+        "options.slicePartitions cannot be less than three."
+      );
+    }
+    if (stackPartitions < 3) {
+      throw new Check.DeveloperError(
+        "options.stackPartitions cannot be less than three."
+      );
+    }
+    //>>includeEnd('debug');
+
+    this._radii = Matrix3.Cartesian3.clone(radii);
+    this._innerRadii = Matrix3.Cartesian3.clone(innerRadii);
+    this._minimumClock = minimumClock;
+    this._maximumClock = maximumClock;
+    this._minimumCone = minimumCone;
+    this._maximumCone = maximumCone;
+    this._stackPartitions = stackPartitions;
+    this._slicePartitions = slicePartitions;
+    this._vertexFormat = VertexFormat.VertexFormat.clone(vertexFormat);
+    this._offsetAttribute = options.offsetAttribute;
+    this._workerName = "createEllipsoidGeometry";
+  }
+
+  /**
+   * The number of elements used to pack the object into an array.
+   * @type {Number}
+   */
+  EllipsoidGeometry.packedLength =
+    2 * Matrix3.Cartesian3.packedLength + VertexFormat.VertexFormat.packedLength + 7;
+
+  /**
+   * Stores the provided instance into the provided array.
+   *
+   * @param {EllipsoidGeometry} value The value to pack.
+   * @param {Number[]} array The array to pack into.
+   * @param {Number} [startingIndex=0] The index into the array at which to start packing the elements.
+   *
+   * @returns {Number[]} The array that was packed into
+   */
+  EllipsoidGeometry.pack = function (value, array, startingIndex) {
+    //>>includeStart('debug', pragmas.debug);
+    if (!defaultValue.defined(value)) {
+      throw new Check.DeveloperError("value is required");
+    }
+    if (!defaultValue.defined(array)) {
+      throw new Check.DeveloperError("array is required");
+    }
+    //>>includeEnd('debug');
+
+    startingIndex = defaultValue.defaultValue(startingIndex, 0);
+
+    Matrix3.Cartesian3.pack(value._radii, array, startingIndex);
+    startingIndex += Matrix3.Cartesian3.packedLength;
+
+    Matrix3.Cartesian3.pack(value._innerRadii, array, startingIndex);
+    startingIndex += Matrix3.Cartesian3.packedLength;
+
+    VertexFormat.VertexFormat.pack(value._vertexFormat, array, startingIndex);
+    startingIndex += VertexFormat.VertexFormat.packedLength;
+
+    array[startingIndex++] = value._minimumClock;
+    array[startingIndex++] = value._maximumClock;
+    array[startingIndex++] = value._minimumCone;
+    array[startingIndex++] = value._maximumCone;
+    array[startingIndex++] = value._stackPartitions;
+    array[startingIndex++] = value._slicePartitions;
+    array[startingIndex] = defaultValue.defaultValue(value._offsetAttribute, -1);
+
+    return array;
+  };
+
+  const scratchRadii = new Matrix3.Cartesian3();
+  const scratchInnerRadii = new Matrix3.Cartesian3();
+  const scratchVertexFormat = new VertexFormat.VertexFormat();
+  const scratchOptions = {
+    radii: scratchRadii,
+    innerRadii: scratchInnerRadii,
+    vertexFormat: scratchVertexFormat,
+    minimumClock: undefined,
+    maximumClock: undefined,
+    minimumCone: undefined,
+    maximumCone: undefined,
+    stackPartitions: undefined,
+    slicePartitions: undefined,
+    offsetAttribute: undefined,
+  };
+
+  /**
+   * Retrieves an instance from a packed array.
+   *
+   * @param {Number[]} array The packed array.
+   * @param {Number} [startingIndex=0] The starting index of the element to be unpacked.
+   * @param {EllipsoidGeometry} [result] The object into which to store the result.
+   * @returns {EllipsoidGeometry} The modified result parameter or a new EllipsoidGeometry instance if one was not provided.
+   */
+  EllipsoidGeometry.unpack = function (array, startingIndex, result) {
+    //>>includeStart('debug', pragmas.debug);
+    if (!defaultValue.defined(array)) {
+      throw new Check.DeveloperError("array is required");
+    }
+    //>>includeEnd('debug');
+
+    startingIndex = defaultValue.defaultValue(startingIndex, 0);
+
+    const radii = Matrix3.Cartesian3.unpack(array, startingIndex, scratchRadii);
+    startingIndex += Matrix3.Cartesian3.packedLength;
+
+    const innerRadii = Matrix3.Cartesian3.unpack(array, startingIndex, scratchInnerRadii);
+    startingIndex += Matrix3.Cartesian3.packedLength;
+
+    const vertexFormat = VertexFormat.VertexFormat.unpack(
+      array,
+      startingIndex,
+      scratchVertexFormat
+    );
+    startingIndex += VertexFormat.VertexFormat.packedLength;
+
+    const minimumClock = array[startingIndex++];
+    const maximumClock = array[startingIndex++];
+    const minimumCone = array[startingIndex++];
+    const maximumCone = array[startingIndex++];
+    const stackPartitions = array[startingIndex++];
+    const slicePartitions = array[startingIndex++];
+    const offsetAttribute = array[startingIndex];
+
+    if (!defaultValue.defined(result)) {
+      scratchOptions.minimumClock = minimumClock;
+      scratchOptions.maximumClock = maximumClock;
+      scratchOptions.minimumCone = minimumCone;
+      scratchOptions.maximumCone = maximumCone;
+      scratchOptions.stackPartitions = stackPartitions;
+      scratchOptions.slicePartitions = slicePartitions;
+      scratchOptions.offsetAttribute =
+        offsetAttribute === -1 ? undefined : offsetAttribute;
+      return new EllipsoidGeometry(scratchOptions);
+    }
+
+    result._radii = Matrix3.Cartesian3.clone(radii, result._radii);
+    result._innerRadii = Matrix3.Cartesian3.clone(innerRadii, result._innerRadii);
+    result._vertexFormat = VertexFormat.VertexFormat.clone(vertexFormat, result._vertexFormat);
+    result._minimumClock = minimumClock;
+    result._maximumClock = maximumClock;
+    result._minimumCone = minimumCone;
+    result._maximumCone = maximumCone;
+    result._stackPartitions = stackPartitions;
+    result._slicePartitions = slicePartitions;
+    result._offsetAttribute =
+      offsetAttribute === -1 ? undefined : offsetAttribute;
+
+    return result;
+  };
+
+  /**
+   * Computes the geometric representation of an ellipsoid, including its vertices, indices, and a bounding sphere.
+   *
+   * @param {EllipsoidGeometry} ellipsoidGeometry A description of the ellipsoid.
+   * @returns {Geometry|undefined} The computed vertices and indices.
+   */
+  EllipsoidGeometry.createGeometry = function (ellipsoidGeometry) {
+    const radii = ellipsoidGeometry._radii;
+    if (radii.x <= 0 || radii.y <= 0 || radii.z <= 0) {
+      return;
+    }
+
+    const innerRadii = ellipsoidGeometry._innerRadii;
+    if (innerRadii.x <= 0 || innerRadii.y <= 0 || innerRadii.z <= 0) {
+      return;
+    }
+
+    const minimumClock = ellipsoidGeometry._minimumClock;
+    const maximumClock = ellipsoidGeometry._maximumClock;
+    const minimumCone = ellipsoidGeometry._minimumCone;
+    const maximumCone = ellipsoidGeometry._maximumCone;
+    const vertexFormat = ellipsoidGeometry._vertexFormat;
+
+    // Add an extra slice and stack so that the number of partitions is the
+    // number of surfaces rather than the number of joints
+    let slicePartitions = ellipsoidGeometry._slicePartitions + 1;
+    let stackPartitions = ellipsoidGeometry._stackPartitions + 1;
+
+    slicePartitions = Math.round(
+      (slicePartitions * Math.abs(maximumClock - minimumClock)) /
+        Math$1.CesiumMath.TWO_PI
+    );
+    stackPartitions = Math.round(
+      (stackPartitions * Math.abs(maximumCone - minimumCone)) / Math$1.CesiumMath.PI
+    );
+
+    if (slicePartitions < 2) {
+      slicePartitions = 2;
+    }
+    if (stackPartitions < 2) {
+      stackPartitions = 2;
+    }
+
+    let i;
+    let j;
+    let index = 0;
+
+    // Create arrays for theta and phi. Duplicate first and last angle to
+    // allow different normals at the intersections.
+    const phis = [minimumCone];
+    const thetas = [minimumClock];
+    for (i = 0; i < stackPartitions; i++) {
+      phis.push(
+        minimumCone + (i * (maximumCone - minimumCone)) / (stackPartitions - 1)
+      );
+    }
+    phis.push(maximumCone);
+    for (j = 0; j < slicePartitions; j++) {
+      thetas.push(
+        minimumClock + (j * (maximumClock - minimumClock)) / (slicePartitions - 1)
+      );
+    }
+    thetas.push(maximumClock);
+    const numPhis = phis.length;
+    const numThetas = thetas.length;
+
+    // Allow for extra indices if there is an inner surface and if we need
+    // to close the sides if the clock range is not a full circle
+    let extraIndices = 0;
+    let vertexMultiplier = 1.0;
+    const hasInnerSurface =
+      innerRadii.x !== radii.x ||
+      innerRadii.y !== radii.y ||
+      innerRadii.z !== radii.z;
+    let isTopOpen = false;
+    let isBotOpen = false;
+    let isClockOpen = false;
+    if (hasInnerSurface) {
+      vertexMultiplier = 2.0;
+      if (minimumCone > 0.0) {
+        isTopOpen = true;
+        extraIndices += slicePartitions - 1;
+      }
+      if (maximumCone < Math.PI) {
+        isBotOpen = true;
+        extraIndices += slicePartitions - 1;
+      }
+      if ((maximumClock - minimumClock) % Math$1.CesiumMath.TWO_PI) {
+        isClockOpen = true;
+        extraIndices += (stackPartitions - 1) * 2 + 1;
+      } else {
+        extraIndices += 1;
+      }
+    }
+
+    const vertexCount = numThetas * numPhis * vertexMultiplier;
+    const positions = new Float64Array(vertexCount * 3);
+    const isInner = new Array(vertexCount).fill(false);
+    const negateNormal = new Array(vertexCount).fill(false);
+
+    // Multiply by 6 because there are two triangles per sector
+    const indexCount = slicePartitions * stackPartitions * vertexMultiplier;
+    const numIndices =
+      6 *
+      (indexCount +
+        extraIndices +
+        1 -
+        (slicePartitions + stackPartitions) * vertexMultiplier);
+    const indices = IndexDatatype.IndexDatatype.createTypedArray(indexCount, numIndices);
+
+    const normals = vertexFormat.normal
+      ? new Float32Array(vertexCount * 3)
+      : undefined;
+    const tangents = vertexFormat.tangent
+      ? new Float32Array(vertexCount * 3)
+      : undefined;
+    const bitangents = vertexFormat.bitangent
+      ? new Float32Array(vertexCount * 3)
+      : undefined;
+    const st = vertexFormat.st ? new Float32Array(vertexCount * 2) : undefined;
+
+    // Calculate sin/cos phi
+    const sinPhi = new Array(numPhis);
+    const cosPhi = new Array(numPhis);
+    for (i = 0; i < numPhis; i++) {
+      sinPhi[i] = sin(phis[i]);
+      cosPhi[i] = cos(phis[i]);
+    }
+
+    // Calculate sin/cos theta
+    const sinTheta = new Array(numThetas);
+    const cosTheta = new Array(numThetas);
+    for (j = 0; j < numThetas; j++) {
+      cosTheta[j] = cos(thetas[j]);
+      sinTheta[j] = sin(thetas[j]);
+    }
+
+    // Create outer surface
+    for (i = 0; i < numPhis; i++) {
+      for (j = 0; j < numThetas; j++) {
+        positions[index++] = radii.x * sinPhi[i] * cosTheta[j];
+        positions[index++] = radii.y * sinPhi[i] * sinTheta[j];
+        positions[index++] = radii.z * cosPhi[i];
+      }
+    }
+
+    // Create inner surface
+    let vertexIndex = vertexCount / 2.0;
+    if (hasInnerSurface) {
+      for (i = 0; i < numPhis; i++) {
+        for (j = 0; j < numThetas; j++) {
+          positions[index++] = innerRadii.x * sinPhi[i] * cosTheta[j];
+          positions[index++] = innerRadii.y * sinPhi[i] * sinTheta[j];
+          positions[index++] = innerRadii.z * cosPhi[i];
+
+          // Keep track of which vertices are the inner and which ones
+          // need the normal to be negated
+          isInner[vertexIndex] = true;
+          if (i > 0 && i !== numPhis - 1 && j !== 0 && j !== numThetas - 1) {
+            negateNormal[vertexIndex] = true;
+          }
+          vertexIndex++;
+        }
+      }
+    }
+
+    // Create indices for outer surface
+    index = 0;
+    let topOffset;
+    let bottomOffset;
+    for (i = 1; i < numPhis - 2; i++) {
+      topOffset = i * numThetas;
+      bottomOffset = (i + 1) * numThetas;
+
+      for (j = 1; j < numThetas - 2; j++) {
+        indices[index++] = bottomOffset + j;
+        indices[index++] = bottomOffset + j + 1;
+        indices[index++] = topOffset + j + 1;
+
+        indices[index++] = bottomOffset + j;
+        indices[index++] = topOffset + j + 1;
+        indices[index++] = topOffset + j;
+      }
+    }
+
+    // Create indices for inner surface
+    if (hasInnerSurface) {
+      const offset = numPhis * numThetas;
+      for (i = 1; i < numPhis - 2; i++) {
+        topOffset = offset + i * numThetas;
+        bottomOffset = offset + (i + 1) * numThetas;
+
+        for (j = 1; j < numThetas - 2; j++) {
+          indices[index++] = bottomOffset + j;
+          indices[index++] = topOffset + j;
+          indices[index++] = topOffset + j + 1;
+
+          indices[index++] = bottomOffset + j;
+          indices[index++] = topOffset + j + 1;
+          indices[index++] = bottomOffset + j + 1;
+        }
+      }
+    }
+
+    let outerOffset;
+    let innerOffset;
+    if (hasInnerSurface) {
+      if (isTopOpen) {
+        // Connect the top of the inner surface to the top of the outer surface
+        innerOffset = numPhis * numThetas;
+        for (i = 1; i < numThetas - 2; i++) {
+          indices[index++] = i;
+          indices[index++] = i + 1;
+          indices[index++] = innerOffset + i + 1;
+
+          indices[index++] = i;
+          indices[index++] = innerOffset + i + 1;
+          indices[index++] = innerOffset + i;
+        }
+      }
+
+      if (isBotOpen) {
+        // Connect the bottom of the inner surface to the bottom of the outer surface
+        outerOffset = numPhis * numThetas - numThetas;
+        innerOffset = numPhis * numThetas * vertexMultiplier - numThetas;
+        for (i = 1; i < numThetas - 2; i++) {
+          indices[index++] = outerOffset + i + 1;
+          indices[index++] = outerOffset + i;
+          indices[index++] = innerOffset + i;
+
+          indices[index++] = outerOffset + i + 1;
+          indices[index++] = innerOffset + i;
+          indices[index++] = innerOffset + i + 1;
+        }
+      }
+    }
+
+    // Connect the edges if clock is not closed
+    if (isClockOpen) {
+      for (i = 1; i < numPhis - 2; i++) {
+        innerOffset = numThetas * numPhis + numThetas * i;
+        outerOffset = numThetas * i;
+        indices[index++] = innerOffset;
+        indices[index++] = outerOffset + numThetas;
+        indices[index++] = outerOffset;
+
+        indices[index++] = innerOffset;
+        indices[index++] = innerOffset + numThetas;
+        indices[index++] = outerOffset + numThetas;
+      }
+
+      for (i = 1; i < numPhis - 2; i++) {
+        innerOffset = numThetas * numPhis + numThetas * (i + 1) - 1;
+        outerOffset = numThetas * (i + 1) - 1;
+        indices[index++] = outerOffset + numThetas;
+        indices[index++] = innerOffset;
+        indices[index++] = outerOffset;
+
+        indices[index++] = outerOffset + numThetas;
+        indices[index++] = innerOffset + numThetas;
+        indices[index++] = innerOffset;
+      }
+    }
+
+    const attributes = new GeometryAttributes.GeometryAttributes();
+
+    if (vertexFormat.position) {
+      attributes.position = new GeometryAttribute.GeometryAttribute({
+        componentDatatype: ComponentDatatype.ComponentDatatype.DOUBLE,
+        componentsPerAttribute: 3,
+        values: positions,
+      });
+    }
+
+    let stIndex = 0;
+    let normalIndex = 0;
+    let tangentIndex = 0;
+    let bitangentIndex = 0;
+    const vertexCountHalf = vertexCount / 2.0;
+
+    let ellipsoid;
+    const ellipsoidOuter = Matrix3.Ellipsoid.fromCartesian3(radii);
+    const ellipsoidInner = Matrix3.Ellipsoid.fromCartesian3(innerRadii);
+
+    if (
+      vertexFormat.st ||
+      vertexFormat.normal ||
+      vertexFormat.tangent ||
+      vertexFormat.bitangent
+    ) {
+      for (i = 0; i < vertexCount; i++) {
+        ellipsoid = isInner[i] ? ellipsoidInner : ellipsoidOuter;
+        const position = Matrix3.Cartesian3.fromArray(positions, i * 3, scratchPosition);
+        const normal = ellipsoid.geodeticSurfaceNormal(position, scratchNormal);
+        if (negateNormal[i]) {
+          Matrix3.Cartesian3.negate(normal, normal);
+        }
+
+        if (vertexFormat.st) {
+          const normalST = Matrix2.Cartesian2.negate(normal, scratchNormalST);
+          st[stIndex++] =
+            Math.atan2(normalST.y, normalST.x) / Math$1.CesiumMath.TWO_PI + 0.5;
+          st[stIndex++] = Math.asin(normal.z) / Math.PI + 0.5;
+        }
+
+        if (vertexFormat.normal) {
+          normals[normalIndex++] = normal.x;
+          normals[normalIndex++] = normal.y;
+          normals[normalIndex++] = normal.z;
+        }
+
+        if (vertexFormat.tangent || vertexFormat.bitangent) {
+          const tangent = scratchTangent;
+
+          // Use UNIT_X for the poles
+          let tangetOffset = 0;
+          let unit;
+          if (isInner[i]) {
+            tangetOffset = vertexCountHalf;
+          }
+          if (
+            !isTopOpen &&
+            i >= tangetOffset &&
+            i < tangetOffset + numThetas * 2
+          ) {
+            unit = Matrix3.Cartesian3.UNIT_X;
+          } else {
+            unit = Matrix3.Cartesian3.UNIT_Z;
+          }
+          Matrix3.Cartesian3.cross(unit, normal, tangent);
+          Matrix3.Cartesian3.normalize(tangent, tangent);
+
+          if (vertexFormat.tangent) {
+            tangents[tangentIndex++] = tangent.x;
+            tangents[tangentIndex++] = tangent.y;
+            tangents[tangentIndex++] = tangent.z;
+          }
+
+          if (vertexFormat.bitangent) {
+            const bitangent = Matrix3.Cartesian3.cross(normal, tangent, scratchBitangent);
+            Matrix3.Cartesian3.normalize(bitangent, bitangent);
+
+            bitangents[bitangentIndex++] = bitangent.x;
+            bitangents[bitangentIndex++] = bitangent.y;
+            bitangents[bitangentIndex++] = bitangent.z;
+          }
+        }
+      }
+
+      if (vertexFormat.st) {
+        attributes.st = new GeometryAttribute.GeometryAttribute({
+          componentDatatype: ComponentDatatype.ComponentDatatype.FLOAT,
+          componentsPerAttribute: 2,
+          values: st,
+        });
+      }
+
+      if (vertexFormat.normal) {
+        attributes.normal = new GeometryAttribute.GeometryAttribute({
+          componentDatatype: ComponentDatatype.ComponentDatatype.FLOAT,
+          componentsPerAttribute: 3,
+          values: normals,
+        });
+      }
+
+      if (vertexFormat.tangent) {
+        attributes.tangent = new GeometryAttribute.GeometryAttribute({
+          componentDatatype: ComponentDatatype.ComponentDatatype.FLOAT,
+          componentsPerAttribute: 3,
+          values: tangents,
+        });
+      }
+
+      if (vertexFormat.bitangent) {
+        attributes.bitangent = new GeometryAttribute.GeometryAttribute({
+          componentDatatype: ComponentDatatype.ComponentDatatype.FLOAT,
+          componentsPerAttribute: 3,
+          values: bitangents,
+        });
+      }
+    }
+
+    if (defaultValue.defined(ellipsoidGeometry._offsetAttribute)) {
+      const length = positions.length;
+      const offsetValue =
+        ellipsoidGeometry._offsetAttribute === GeometryOffsetAttribute.GeometryOffsetAttribute.NONE
+          ? 0
+          : 1;
+      const applyOffset = new Uint8Array(length / 3).fill(offsetValue);
+      attributes.applyOffset = new GeometryAttribute.GeometryAttribute({
+        componentDatatype: ComponentDatatype.ComponentDatatype.UNSIGNED_BYTE,
+        componentsPerAttribute: 1,
+        values: applyOffset,
+      });
+    }
+
+    return new GeometryAttribute.Geometry({
+      attributes: attributes,
+      indices: indices,
+      primitiveType: GeometryAttribute.PrimitiveType.TRIANGLES,
+      boundingSphere: Transforms.BoundingSphere.fromEllipsoid(ellipsoidOuter),
+      offsetAttribute: ellipsoidGeometry._offsetAttribute,
+    });
+  };
+
+  let unitEllipsoidGeometry;
+
+  /**
+   * Returns the geometric representation of a unit ellipsoid, including its vertices, indices, and a bounding sphere.
+   * @returns {Geometry} The computed vertices and indices.
+   *
+   * @private
+   */
+  EllipsoidGeometry.getUnitEllipsoid = function () {
+    if (!defaultValue.defined(unitEllipsoidGeometry)) {
+      unitEllipsoidGeometry = EllipsoidGeometry.createGeometry(
+        new EllipsoidGeometry({
+          radii: new Matrix3.Cartesian3(1.0, 1.0, 1.0),
+          vertexFormat: VertexFormat.VertexFormat.POSITION_ONLY,
+        })
+      );
+    }
+    return unitEllipsoidGeometry;
+  };
+
+  exports.EllipsoidGeometry = EllipsoidGeometry;
+
+}));