@vcad/mcp 0.9.4-main.28 → 0.9.4-main.30

package/README.md

@@ -6,4 +6,4 @@ vcad's MCP server as a self-contained bundle (server + BRep kernel WASM).
 { "mcpServers": { "vcad": { "command": "npx", "args": ["-y", "@vcad/mcp"] } } }
 ```
 
-Built from 301abfbddc2a05c29fabc9f655031e554eab1d04 at 2026-07-26T00:32:29.039Z. Source: https://github.com/ecto/vcad
+Built from 974a993addb05edb724d247bbe538bac48ef58dd at 2026-07-26T00:52:54.781Z. Source: https://github.com/ecto/vcad

package/index.mjs

@@ -113,6 +113,7 @@ __export(vcad_kernel_wasm_exports, {
   documentToLoonChecked: () => documentToLoonChecked,
   drawingSheetToPdf: () => drawingSheetToPdf,
   ecadAirgapFluxDensity: () => ecadAirgapFluxDensity,
+  ecadAirgapSolve: () => ecadAirgapSolve,
   ecadBuildReceipt: () => ecadBuildReceipt,
   ecadBuiltinSymbols: () => ecadBuiltinSymbols,
   ecadCheckDrc: () => ecadCheckDrc,
@@ -1142,6 +1143,15 @@ function ecadAirgapFluxDensity(spec_json) {
   }
   return ret[0];
 }
+function ecadAirgapSolve(spec_json) {
+  const ptr0 = passStringToWasm0(spec_json, wasm.__wbindgen_malloc, wasm.__wbindgen_realloc);
+  const len0 = WASM_VECTOR_LEN;
+  const ret = wasm.ecadAirgapSolve(ptr0, len0);
+  if (ret[2]) {
+    throw takeFromExternrefTable0(ret[1]);
+  }
+  return takeFromExternrefTable0(ret[0]);
+}
 function ecadBuildReceipt(pcb_json) {
   const ptr0 = passStringToWasm0(pcb_json, wasm.__wbindgen_malloc, wasm.__wbindgen_realloc);
   const len0 = WASM_VECTOR_LEN;
@@ -41204,6 +41214,41 @@ var init_CHANGELOG = __esm({
             "quote_manufacturing"
           ]
         },
+        {
+          id: "2026-07-25-em-saturated-picard",
+          version: "0.9.4",
+          date: "2026-07-25",
+          category: "fix",
+          title: "simulate_em solves strongly saturating magnetostatics",
+          summary: "Saturated motor cross-sections no longer fail with an unfixable 'Picard not converged': the nonlinear loop's cap, tolerance and relaxation are now caller-settable, and the default cap was raised.",
+          features: [
+            "em",
+            "magnetostatics",
+            "motors"
+          ],
+          mcpTools: [
+            "simulate_em"
+          ]
+        },
+        {
+          id: "2026-07-25-curved-trim-seams-weld",
+          version: "0.9.4",
+          date: "2026-07-25",
+          category: "fix",
+          title: "Bores and cut curved faces close their seams",
+          summary: "A through-hole left the shell open along the bore wall \u2014 visible as hairline cracks and unusable for 3D print or STL export; bores, holed plates and cut fillet corners now come out watertight.",
+          features: [
+            "kernel",
+            "booleans",
+            "tessellation",
+            "export"
+          ],
+          mcpTools: [
+            "create_cad_loon",
+            "inspect_cad",
+            "export_cad"
+          ]
+        },
         {
           id: "2026-07-25-calc-motor-tooth-saturation",
           version: "0.9.4",
@@ -71521,6 +71566,22 @@ var init_em = __esm({
                   type: "number",
                   description: "SOR sweep cap. Default 200000."
                 },
+                picard_max_iters: {
+                  type: "number",
+                  description: "Saturable iron only: cap on the NONLINEAR outer loop over the B-H law. Default 300. Separate from max_sweeps, which caps the inner SOR solve and does nothing for a non-converging material state. A deeply saturated motor section contracts steadily but needs 150-250 iterations; raise this when the error says the residual is still falling."
+                },
+                picard_tol: {
+                  type: "number",
+                  description: "Saturable iron only: nonlinear convergence tolerance on the largest relative reluctivity update. Default 1e-4. Raise it to accept a looser material state deliberately."
+                },
+                picard_relax: {
+                  type: "number",
+                  description: "Saturable iron only: under-relaxation of the nonlinear loop, in (0, 1]. Default 0.7. Lower it ONLY when the error reports the residual has stopped falling (a limit cycle); when the residual is still falling, lowering this makes convergence strictly slower \u2014 raise picard_max_iters instead."
+                },
+                picard_adaptive: {
+                  type: "boolean",
+                  description: "Saturable iron only: back the relaxation off automatically when the nonlinear residual makes no progress over a 10-iteration window. Default FALSE \u2014 on a healthy saturated solve it reacts to ordinary residual jitter and costs ~1.7x the iterations. Turn it on for a device that is demonstrably oscillating."
+                },
                 drive_coil: {
                   type: "number",
                   description: "Axisym: coil index the inductance claim is priced for. Default 0."
@@ -78990,8 +79051,8 @@ var init_server3 = __esm({
     init_order_feed();
     init_animate();
     PKG_VERSION = (() => {
-      if ("0.9.4-main.28") {
-        return "0.9.4-main.28";
+      if ("0.9.4-main.30") {
+        return "0.9.4-main.30";
       }
       try {
         const req = createRequire2(import.meta.url);
@@ -79000,8 +79061,8 @@ var init_server3 = __esm({
         return "0.0.0";
       }
     })();
-    BUILD_SHA = "301abfbddc2a05c29fabc9f655031e554eab1d04";
-    BUILD_TIME = "2026-07-26T00:32:29.039Z";
+    BUILD_SHA = "974a993addb05edb724d247bbe538bac48ef58dd";
+    BUILD_TIME = "2026-07-26T00:52:54.781Z";
     SHORT_SHA = BUILD_SHA === "unknown" ? "unknown" : BUILD_SHA.slice(0, 7);
     VERSION_WITH_BUILD = SHORT_SHA === "unknown" ? PKG_VERSION : `${PKG_VERSION}+${SHORT_SHA}`;
     INSTANCE_ID = randomUUID6().slice(0, 8);

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@vcad/mcp",
-  "version": "0.9.4-main.28",
+  "version": "0.9.4-main.30",
   "description": "vcad MCP server — parametric CAD + PCB design tools for AI agents (self-contained: bundled server + kernel WASM)",
   "license": "MIT",
   "type": "module",
@@ -19,7 +19,7 @@
   },
   "homepage": "https://vcad.io",
   "vcadBuild": {
-    "sha": "301abfbddc2a05c29fabc9f655031e554eab1d04",
-    "builtAt": "2026-07-26T00:32:29.039Z"
+    "sha": "974a993addb05edb724d247bbe538bac48ef58dd",
+    "builtAt": "2026-07-26T00:52:54.781Z"
   }
 }