@valbuild/server 0.147.0 → 0.148.0

package/CHANGELOG.md

@@ -1,5 +1,113 @@
 # @valbuild/server
 
+## 0.148.0
+
+### Patch Changes
+
+- [#885](https://github.com/valbuild/val/pull/885) [`df5544c`](https://github.com/valbuild/val/commit/df5544c6e92a4c3a52765630c9de191e854ee723) Thanks [@freekh](https://github.com/freekh)! - Demo mode (`<ValApp demo>`) now starts under `vite dev`. It used to stop at
+  "The demo could not start: part of it did not load", with
+  `does not provide an export named 'Buffer'` in the console, because the server
+  that runs in the tab imported the CommonJS `buffer` package, and Vite's dev
+  server does not convert a dependency it only meets in a chunk loaded on demand.
+  That server now handles bytes without `buffer`, so an app needs no Vite
+  configuration for it, and `@valbuild/server` no longer depends on the package.
+  If you added `buffer` to `optimizeDeps.include` to work around this, you can
+  remove it.
+
+- [#818](https://github.com/valbuild/val/pull/818) [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1) Thanks [@freekh](https://github.com/freekh)! - `createFixPatch` reads a file's bytes, and saves a downloaded remote file,
+  through an optional `files` reader instead of directly from disk. The default
+  reads the disk under `projectRoot` exactly as before, so `val validate --fix`
+  and the VS Code extension behave the same.
+
+- [#818](https://github.com/valbuild/val/pull/818) [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1) Thanks [@freekh](https://github.com/freekh)! - Remote files are now addressed on the host the project's settings name. For a
+  project hosted by Val, that is the project's own address, and its remote images
+  and files are served from there rather than from `remote.val.build`. Every other
+  project is unchanged.
+
+  - The Studio, `val validate --fix` and the MCP image tool all take the host from
+    the project's settings, falling back to `remote.val.build` as before.
+  - Re-reading a remote file whose recorded size or type is out of date keeps it
+    on the host it was on.
+  - When a remote file's host cannot be reached, tooling downloads it from the
+    project's permanent `<id>.valstart.dev` address instead, and keeps it only if
+    its bytes match the file the address names.
+
+- [#818](https://github.com/valbuild/val/pull/818) [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1) Thanks [@freekh](https://github.com/freekh)! - Remote files served from a project's own site (addresses like
+  `https://www.acme.no/_val/file/…`) are now checked for whether that address
+  still serves the project. When a custom domain has been removed or moved to
+  another project, the image or file is reported, and **Fix** on the Studio's
+  Validate page — or `val validate --fix` — points it at the project's permanent
+  `<id>.valstart.dev` address. Nothing is uploaded or downloaded: only the address
+  changes.
+
+  Remote file addresses with a `/_val` prefix after the host are now recognised.
+
+- [#818](https://github.com/valbuild/val/pull/818) [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1) Thanks [@freekh](https://github.com/freekh)! - **Check everything** on the Studio's Validate page now checks media directories
+  (`s.imagedir()`, `s.filedir()`, `s.fontdir()` and `s.videodir()`) by the files
+  they list:
+
+  - An entry whose file is gone has a **Fix** that removes it from the directory.
+  - An image or file entry whose recorded size or type does not match its file has
+    a **Fix** that corrects it from the file, keeping its alt text.
+  - A video entry whose file is gone is reported, and is removed by hand: its
+    posters and captions may still be in use.
+  - A remote entry is checked with its host, like any remote file.
+
+  `val validate --fix` fixes media directories exactly as before.
+
+- [#818](https://github.com/valbuild/val/pull/818) [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1) Thanks [@freekh](https://github.com/freekh)! - The Studio has a **Validate** page, at `/val/validate`, and a button for it in
+  the top bar with the number of errors left.
+
+  It lists the errors the Studio already shows, as the errors page did, and adds
+  **Check everything**: a check of every module on the server, including whether
+  each image's and file's recorded size and type match the file itself. It runs
+  only when you press it, can be stopped, and its results stay for the session.
+
+  Where the Studio can make the fix itself — a missing or wrong width, height or
+  mime type on an image, file or video — the row has a **Fix** button. A fix is an
+  ordinary change: it shows up in Review, is published with everything else, and
+  can be undone from the row. Fixes that need a terminal show the
+  `val validate --fix` command to copy.
+
+  `/val/errors` still works and opens the same page.
+
+  Also fixed: `.jsonValues()` entries no longer report every image in them as
+  "not checked against the file" when validated on the server.
+
+- [#818](https://github.com/valbuild/val/pull/818) [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1) Thanks [@freekh](https://github.com/freekh)! - **Check everything** on the Studio's Validate page now checks remote images and
+  files too.
+
+  - A remote image or file whose address no longer matches what is recorded about
+    it (its size, type or the schema's options changed since it was uploaded) has
+    a **Fix**, which re-reads the file and corrects it, as `val validate --fix`
+    does.
+  - A remote host that does not answer is shown once, at the top of the page, with
+    how many files it holds and a **Try again**, rather than as an error on every
+    image.
+  - A file its host no longer has is shown at the image or file that uses it.
+
+  Images and files in your unpublished changes are not asked about until they are
+  published; the check makes sure the change still has them.
+
+- [#818](https://github.com/valbuild/val/pull/818) [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1) Thanks [@freekh](https://github.com/freekh)! - Two new Studio API routes for the full content check, not yet used by the
+  Studio's UI:
+
+  - `POST /api/val/validate` checks one module — its content against its schema,
+    and its local images and files against their bytes — on the content the
+    Studio is showing.
+  - `POST /api/val/validate/fix` returns the patch that fixes one of those errors,
+    for the Studio to add as a pending change. It builds only the fixes that need
+    no disk or remote host: image, file and video metadata, and a view pointing at
+    the wrong module.
+
+  Also fixed: an API route whose name started with another route's name could be
+  answered by the other route.
+
+- Updated dependencies [[`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1), [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1), [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1), [`4176757`](https://github.com/valbuild/val/commit/41767579b01849473a94779122fd39c07dd99234), [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1), [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1), [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1), [`562d032`](https://github.com/valbuild/val/commit/562d03280c3fcf97a80562e8b017dd2125ac4ad1)]:
+  - @valbuild/shared@0.148.0
+  - @valbuild/ui@0.148.0
+  - @valbuild/core@0.148.0
+
 ## 0.147.0
 
 ### Minor Changes

package/browser/dist/valbuild-server-browser.cjs.dev.js

@@ -3,8 +3,7 @@
 Object.defineProperty(exports, '__esModule', { value: true });
 
 var core = require('@valbuild/core');
-var ValRouterCore = require('../../dist/ValRouterCore-3fd3d444.cjs.dev.js');
-require('buffer');
+var ValRouterCore = require('../../dist/ValRouterCore-9bdaaf89.cjs.dev.js');
 require('@valbuild/shared/internal');
 require('zod');
 require('zod-validation-error');
@@ -60,6 +59,7 @@ const browserPlatform = {
     },
     getExpire: () => Math.floor(Date.now() / 1000) + 60 * 60
   },
+  bytesToBase64: ValRouterCore.bytesToBase64,
   readValLoginToken: async () => null,
   resolveRemoteFileAuth: async () => ({
     status: "error",

package/browser/dist/valbuild-server-browser.cjs.prod.js

@@ -3,8 +3,7 @@
 Object.defineProperty(exports, '__esModule', { value: true });
 
 var core = require('@valbuild/core');
-var ValRouterCore = require('../../dist/ValRouterCore-7ffcc08c.cjs.prod.js');
-require('buffer');
+var ValRouterCore = require('../../dist/ValRouterCore-42772c21.cjs.prod.js');
 require('@valbuild/shared/internal');
 require('zod');
 require('zod-validation-error');
@@ -60,6 +59,7 @@ const browserPlatform = {
     },
     getExpire: () => Math.floor(Date.now() / 1000) + 60 * 60
   },
+  bytesToBase64: ValRouterCore.bytesToBase64,
   readValLoginToken: async () => null,
   resolveRemoteFileAuth: async () => ({
     status: "error",

package/browser/dist/valbuild-server-browser.esm.js

@@ -1,6 +1,5 @@
 import { DEFAULT_CONTENT_HOST } from '@valbuild/core';
-import { j as ValOpsMemory, k as ValServer, l as createValRequestHandler } from '../../dist/ValRouterCore-f5004f8f.esm.js';
-import 'buffer';
+import { j as ValOpsMemory, E as bytesToBase64, y as ValServer, z as createValRequestHandler } from '../../dist/ValRouterCore-7ca3dc68.esm.js';
 import '@valbuild/shared/internal';
 import 'zod';
 import 'zod-validation-error';
@@ -56,6 +55,7 @@ const browserPlatform = {
     },
     getExpire: () => Math.floor(Date.now() / 1000) + 60 * 60
   },
+  bytesToBase64,
   readValLoginToken: async () => null,
   resolveRemoteFileAuth: async () => ({
     status: "error",