@uns-kit/cli 0.0.38 → 0.0.39

package/templates/python/venv/lib/python3.12/site-packages/setuptools/_vendor/autocommand-2.2.2.dist-info/LICENSE

@@ -0,0 +1,166 @@
+GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions.
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version.
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.
+

package/templates/python/venv/lib/python3.12/site-packages/setuptools/_vendor/autocommand-2.2.2.dist-info/METADATA

@@ -0,0 +1,420 @@
+Metadata-Version: 2.1
+Name: autocommand
+Version: 2.2.2
+Summary: A library to create a command-line program from a function
+Home-page: https://github.com/Lucretiel/autocommand
+Author: Nathan West
+License: LGPLv3
+Project-URL: Homepage, https://github.com/Lucretiel/autocommand
+Project-URL: Bug Tracker, https://github.com/Lucretiel/autocommand/issues
+Platform: any
+Classifier: Development Status :: 6 - Mature
+Classifier: Intended Audience :: Developers
+Classifier: License :: OSI Approved :: GNU Lesser General Public License v3 (LGPLv3)
+Classifier: Programming Language :: Python
+Classifier: Programming Language :: Python :: 3
+Classifier: Programming Language :: Python :: 3 :: Only
+Classifier: Topic :: Software Development
+Classifier: Topic :: Software Development :: Libraries
+Classifier: Topic :: Software Development :: Libraries :: Python Modules
+Requires-Python: >=3.7
+Description-Content-Type: text/markdown
+License-File: LICENSE
+
+[![PyPI version](https://badge.fury.io/py/autocommand.svg)](https://badge.fury.io/py/autocommand)
+
+# autocommand
+
+A library to automatically generate and run simple argparse parsers from function signatures.
+
+## Installation
+
+Autocommand is installed via pip:
+
+```
+$ pip install autocommand
+```
+
+## Usage
+
+Autocommand turns a function into a command-line program. It converts the function's parameter signature into command-line arguments, and automatically runs the function if the module was called as `__main__`. In effect, it lets your create a smart main function.
+
+```python
+from autocommand import autocommand
+
+# This program takes exactly one argument and echos it.
+@autocommand(__name__)
+def echo(thing):
+    print(thing)
+```
+
+```
+$ python echo.py hello
+hello
+$ python echo.py -h
+usage: echo [-h] thing
+
+positional arguments:
+  thing
+
+optional arguments:
+  -h, --help  show this help message and exit
+$ python echo.py hello world  # too many arguments
+usage: echo.py [-h] thing
+echo.py: error: unrecognized arguments: world
+```
+
+As you can see, autocommand converts the signature of the function into an argument spec. When you run the file as a program, autocommand collects the command-line arguments and turns them into function arguments. The function is executed with these arguments, and then the program exits with the return value of the function, via `sys.exit`. Autocommand also automatically creates a usage message, which can be invoked with `-h` or `--help`, and automatically prints an error message when provided with invalid arguments.
+
+### Types
+
+You can use a type annotation to give an argument a type. Any type (or in fact any callable) that returns an object when given a string argument can be used, though there are a few special cases that are described later.
+
+```python
+@autocommand(__name__)
+def net_client(host, port: int):
+    ...
+```
+
+Autocommand will catch `TypeErrors` raised by the type during argument parsing, so you can supply a callable and do some basic argument validation as well.
+
+### Trailing Arguments
+
+You can add a `*args` parameter to your function to give it trailing arguments. The command will collect 0 or more trailing arguments and supply them to `args` as a tuple. If a type annotation is supplied, the type is applied to each argument.
+
+```python
+# Write the contents of each file, one by one
+@autocommand(__name__)
+def cat(*files):
+    for filename in files:
+        with open(filename) as file:
+            for line in file:
+                print(line.rstrip())
+```
+
+```
+$ python cat.py -h
+usage: ipython [-h] [file [file ...]]
+
+positional arguments:
+  file
+
+optional arguments:
+  -h, --help  show this help message and exit
+```
+
+### Options
+
+To create `--option` switches, just assign a default. Autocommand will automatically create `--long` and `-s`hort switches.
+
+```python
+@autocommand(__name__)
+def do_with_config(argument, config='~/foo.conf'):
+    pass
+```
+
+```
+$ python example.py -h
+usage: example.py [-h] [-c CONFIG] argument
+
+positional arguments:
+  argument
+
+optional arguments:
+  -h, --help            show this help message and exit
+  -c CONFIG, --config CONFIG
+```
+
+The option's type is automatically deduced from the default, unless one is explicitly given in an annotation:
+
+```python
+@autocommand(__name__)
+def http_connect(host, port=80):
+    print('{}:{}'.format(host, port))
+```
+
+```
+$ python http.py -h
+usage: http.py [-h] [-p PORT] host
+
+positional arguments:
+  host
+
+optional arguments:
+  -h, --help            show this help message and exit
+  -p PORT, --port PORT
+$ python http.py localhost
+localhost:80
+$ python http.py localhost -p 8080
+localhost:8080
+$ python http.py localhost -p blah
+usage: http.py [-h] [-p PORT] host
+http.py: error: argument -p/--port: invalid int value: 'blah'
+```
+
+#### None
+
+If an option is given a default value of `None`, it reads in a value as normal, but supplies `None` if the option isn't provided.
+
+#### Switches
+
+If an argument is given a default value of `True` or `False`, or
+given an explicit `bool` type, it becomes an option switch.
+
+```python
+    @autocommand(__name__)
+    def example(verbose=False, quiet=False):
+        pass
+```
+
+```
+$ python example.py -h
+usage: example.py [-h] [-v] [-q]
+
+optional arguments:
+  -h, --help     show this help message and exit
+  -v, --verbose
+  -q, --quiet
+```
+
+Autocommand attempts to do the "correct thing" in these cases- if the default is `True`, then supplying the switch makes the argument `False`; if the type is `bool` and the default is some other `True` value, then supplying the switch makes the argument `False`, while not supplying the switch makes the argument the default value.
+
+Autocommand also supports the creation of switch inverters. Pass `add_nos=True` to `autocommand` to enable this.
+
+```
+    @autocommand(__name__, add_nos=True)
+    def example(verbose=False):
+        pass
+```
+
+```
+$ python example.py -h
+usage: ipython [-h] [-v] [--no-verbose]
+
+optional arguments:
+  -h, --help     show this help message and exit
+  -v, --verbose
+  --no-verbose
+```
+
+Using the `--no-` version of a switch will pass the opposite value in as a function argument. If multiple switches are present, the last one takes precedence.
+
+#### Files
+
+If the default value is a file object, such as `sys.stdout`, then autocommand just looks for a string, for a file path. It doesn't do any special checking on the string, though (such as checking if the file exists); it's better to let the client decide how to handle errors in this case. Instead, it provides a special context manager called `smart_open`, which behaves exactly like `open` if a filename or other openable type is provided, but also lets you use already open files:
+
+```python
+from autocommand import autocommand, smart_open
+import sys
+
+# Write the contents of stdin, or a file, to stdout
+@autocommand(__name__)
+def write_out(infile=sys.stdin):
+    with smart_open(infile) as f:
+        for line in f:
+            print(line.rstrip())
+    # If a file was opened, it is closed here. If it was just stdin, it is untouched.
+```
+
+```
+$ echo "Hello World!" | python write_out.py | tee hello.txt
+Hello World!
+$ python write_out.py --infile hello.txt
+Hello World!
+```
+
+### Descriptions and docstrings
+
+The `autocommand` decorator accepts `description` and `epilog` kwargs, corresponding to the `description <https://docs.python.org/3/library/argparse.html#description>`_ and `epilog <https://docs.python.org/3/library/argparse.html#epilog>`_ of the `ArgumentParser`. If no description is given, but the decorated function has a docstring, then it is taken as the `description` for the `ArgumentParser`. You can also provide both the description and epilog in the docstring by splitting it into two sections with 4 or more - characters.
+
+```python
+@autocommand(__name__)
+def copy(infile=sys.stdin, outfile=sys.stdout):
+    '''
+    Copy an the contents of a file (or stdin) to another file (or stdout)
+    ----------
+    Some extra documentation in the epilog
+    '''
+    with smart_open(infile) as istr:
+        with smart_open(outfile, 'w') as ostr:
+            for line in istr:
+                ostr.write(line)
+```
+
+```
+$ python copy.py -h
+usage: copy.py [-h] [-i INFILE] [-o OUTFILE]
+
+Copy an the contents of a file (or stdin) to another file (or stdout)
+
+optional arguments:
+  -h, --help            show this help message and exit
+  -i INFILE, --infile INFILE
+  -o OUTFILE, --outfile OUTFILE
+
+Some extra documentation in the epilog
+$ echo "Hello World" | python copy.py --outfile hello.txt
+$ python copy.py --infile hello.txt --outfile hello2.txt
+$ python copy.py --infile hello2.txt
+Hello World
+```
+
+### Parameter descriptions
+
+You can also attach description text to individual parameters in the annotation. To attach both a type and a description, supply them both in any order in a tuple
+
+```python
+@autocommand(__name__)
+def copy_net(
+    infile: 'The name of the file to send',
+    host: 'The host to send the file to',
+    port: (int, 'The port to connect to')):
+
+    '''
+    Copy a file over raw TCP to a remote destination.
+    '''
+    # Left as an exercise to the reader
+```
+
+### Decorators and wrappers
+
+Autocommand automatically follows wrapper chains created by `@functools.wraps`. This means that you can apply other wrapping decorators to your main function, and autocommand will still correctly detect the signature.
+
+```python
+from functools import wraps
+from autocommand import autocommand
+
+def print_yielded(func):
+    '''
+    Convert a generator into a function that prints all yielded elements
+    '''
+    @wraps(func)
+    def wrapper(*args, **kwargs):
+        for thing in func(*args, **kwargs):
+            print(thing)
+    return wrapper
+
+@autocommand(__name__,
+    description= 'Print all the values from START to STOP, inclusive, in steps of STEP',
+    epilog=      'STOP and STEP default to 1')
+@print_yielded
+def seq(stop, start=1, step=1):
+    for i in range(start, stop + 1, step):
+        yield i
+```
+
+```
+$ seq.py -h
+usage: seq.py [-h] [-s START] [-S STEP] stop
+
+Print all the values from START to STOP, inclusive, in steps of STEP
+
+positional arguments:
+  stop
+
+optional arguments:
+  -h, --help            show this help message and exit
+  -s START, --start START
+  -S STEP, --step STEP
+
+STOP and STEP default to 1
+```
+
+Even though autocommand is being applied to the `wrapper` returned by `print_yielded`, it still retreives the signature of the underlying `seq` function to create the argument parsing.
+
+### Custom Parser
+
+While autocommand's automatic parser generator is a powerful convenience, it doesn't cover all of the different features that argparse provides. If you need these features, you can provide your own parser as a kwarg to `autocommand`:
+
+```python
+from argparse import ArgumentParser
+from autocommand import autocommand
+
+parser = ArgumentParser()
+# autocommand can't do optional positonal parameters
+parser.add_argument('arg', nargs='?')
+# or mutually exclusive options
+group = parser.add_mutually_exclusive_group()
+group.add_argument('-v', '--verbose', action='store_true')
+group.add_argument('-q', '--quiet', action='store_true')
+
+@autocommand(__name__, parser=parser)
+def main(arg, verbose, quiet):
+    print(arg, verbose, quiet)
+```
+
+```
+$ python parser.py -h
+usage: write_file.py [-h] [-v | -q] [arg]
+
+positional arguments:
+  arg
+
+optional arguments:
+  -h, --help     show this help message and exit
+  -v, --verbose
+  -q, --quiet
+$ python parser.py
+None False False
+$ python parser.py hello
+hello False False
+$ python parser.py -v
+None True False
+$ python parser.py -q
+None False True
+$ python parser.py -vq
+usage: parser.py [-h] [-v | -q] [arg]
+parser.py: error: argument -q/--quiet: not allowed with argument -v/--verbose
+```
+
+Any parser should work fine, so long as each of the parser's arguments has a corresponding parameter in the decorated main function. The order of parameters doesn't matter, as long as they are all present. Note that when using a custom parser, autocommand doesn't modify the parser or the retrieved arguments. This means that no description/epilog will be added, and the function's type annotations and defaults (if present) will be ignored.
+
+## Testing and Library use
+
+The decorated function is only called and exited from if the first argument to `autocommand` is `'__main__'` or `True`. If it is neither of these values, or no argument is given, then a new main function is created by the decorator. This function has the signature `main(argv=None)`, and is intended to be called with arguments as if via `main(sys.argv[1:])`. The function has the attributes `parser` and `main`, which are the generated `ArgumentParser` and the original main function that was decorated. This is to facilitate testing and library use of your main. Calling the function triggers a `parse_args()` with the supplied arguments, and returns the result of the main function. Note that, while it returns instead of calling `sys.exit`, the `parse_args()` function will raise a `SystemExit` in the event of a parsing error or `-h/--help` argument.
+
+```python
+    @autocommand()
+    def test_prog(arg1, arg2: int, quiet=False, verbose=False):
+        if not quiet:
+            print(arg1, arg2)
+            if verbose:
+                print("LOUD NOISES")
+
+        return 0
+
+    print(test_prog(['-v', 'hello', '80']))
+```
+
+```
+$ python test_prog.py
+hello 80
+LOUD NOISES
+0
+```
+
+If the function is called with no arguments, `sys.argv[1:]` is used. This is to allow the autocommand function to be used as a setuptools entry point.
+
+## Exceptions and limitations
+
+- There are a few possible exceptions that `autocommand` can raise. All of them derive from `autocommand.AutocommandError`.
+
+  - If an invalid annotation is given (that is, it isn't a `type`, `str`, `(type, str)`, or `(str, type)`, an `AnnotationError` is raised. The `type` may be any callable, as described in the `Types`_ section.
+  - If the function has a `**kwargs` parameter, a `KWargError` is raised.
+  - If, somehow, the function has a positional-only parameter, a `PositionalArgError` is raised. This means that the argument doesn't have a name, which is currently not possible with a plain `def` or `lambda`, though many built-in functions have this kind of parameter.
+
+- There are a few argparse features that are not supported by autocommand.
+
+  - It isn't possible to have an optional positional argument (as opposed to a `--option`). POSIX thinks this is bad form anyway.
+  - It isn't possible to have mutually exclusive arguments or options
+  - It isn't possible to have subcommands or subparsers, though I'm working on a few solutions involving classes or nested function definitions to allow this.
+
+## Development
+
+Autocommand cannot be important from the project root; this is to enforce separation of concerns and prevent accidental importing of `setup.py` or tests. To develop, install the project in editable mode:
+
+```
+$ python setup.py develop
+```
+
+This will create a link to the source files in the deployment directory, so that any source changes are reflected when it is imported.

package/templates/python/venv/lib/python3.12/site-packages/setuptools/_vendor/autocommand-2.2.2.dist-info/RECORD

@@ -0,0 +1,18 @@
+autocommand-2.2.2.dist-info/INSTALLER,sha256=zuuue4knoyJ-UwPPXg8fezS7VCrXJQrAP7zeNuwvFQg,4
+autocommand-2.2.2.dist-info/LICENSE,sha256=reeNBJgtaZctREqOFKlPh6IzTdOFXMgDSOqOJAqg3y0,7634
+autocommand-2.2.2.dist-info/METADATA,sha256=OADZuR3O6iBlpu1ieTgzYul6w4uOVrk0P0BO5TGGAJk,15006
+autocommand-2.2.2.dist-info/RECORD,,
+autocommand-2.2.2.dist-info/WHEEL,sha256=2wepM1nk4DS4eFpYrW1TTqPcoGNfHhhO_i5m4cOimbo,92
+autocommand-2.2.2.dist-info/top_level.txt,sha256=AzfhgKKS8EdAwWUTSF8mgeVQbXOY9kokHB6kSqwwqu0,12
+autocommand/__init__.py,sha256=zko5Rnvolvb-UXjCx_2ArPTGBWwUK5QY4LIQIKYR7As,1037
+autocommand/__pycache__/__init__.cpython-312.pyc,,
+autocommand/__pycache__/autoasync.cpython-312.pyc,,
+autocommand/__pycache__/autocommand.cpython-312.pyc,,
+autocommand/__pycache__/automain.cpython-312.pyc,,
+autocommand/__pycache__/autoparse.cpython-312.pyc,,
+autocommand/__pycache__/errors.cpython-312.pyc,,
+autocommand/autoasync.py,sha256=AMdyrxNS4pqWJfP_xuoOcImOHWD-qT7x06wmKN1Vp-U,5680
+autocommand/autocommand.py,sha256=hmkEmQ72HtL55gnURVjDOnsfYlGd5lLXbvT4KG496Qw,2505
+autocommand/automain.py,sha256=A2b8i754Mxc_DjU9WFr6vqYDWlhz0cn8miu8d8EsxV8,2076
+autocommand/autoparse.py,sha256=WVWmZJPcbzUKXP40raQw_0HD8qPJ2V9VG1eFFmmnFxw,11642
+autocommand/errors.py,sha256=7aa3roh9Herd6nIKpQHNWEslWE8oq7GiHYVUuRqORnA,886

package/templates/python/venv/lib/python3.12/site-packages/setuptools/_vendor/autocommand-2.2.2.dist-info/WHEEL

@@ -0,0 +1,5 @@
+Wheel-Version: 1.0
+Generator: bdist_wheel (0.38.4)
+Root-Is-Purelib: true
+Tag: py3-none-any
+

package/templates/python/venv/lib/python3.12/site-packages/setuptools/_vendor/autocommand-2.2.2.dist-info/top_level.txt

@@ -0,0 +1 @@
+autocommand

package/templates/python/venv/lib/python3.12/site-packages/setuptools/_vendor/backports/__init__.py

@@ -0,0 +1 @@
+__path__ = __import__('pkgutil').extend_path(__path__, __name__)  # type: ignore