@uniswap/universal-router-sdk 4.23.0 → 4.25.0

package/README.md

@@ -31,3 +31,285 @@ Run forge integration tests
 forge install
 yarn test:forge
 ```
+
+## Per-Hop Slippage Protection (V4 Routes)
+
+Universal Router v2.1 adds granular slippage protection for multi-hop V4 swaps. Additionally to checking slippage at the end of a route, you can now verify that each individual hop doesn't exceed a maximum price limit.
+
+### How It Works
+
+For V4 multi-hop swaps, you can provide a `maxHopSlippage` array in your swap options:
+
+```typescript
+import { SwapRouter } from '@uniswap/universal-router-sdk'
+import { BigNumber } from 'ethers'
+import { Percent } from '@uniswap/sdk-core'
+
+const swapOptions = {
+  slippageTolerance: new Percent(50, 10000), // 0.5% overall slippage
+  recipient: '0x...',
+  deadline: Math.floor(Date.now() / 1000) + 60 * 20,
+  // Optional: per-hop slippage protection for V4 routes
+  maxHopSlippage: [
+    BigNumber.from('1010000000000000000'),    // Hop 0: max price 1.01 (1% slippage)
+    BigNumber.from('2500000000000000000000'),  // Hop 1: max price 2500
+  ]
+}
+
+const { calldata, value } = SwapRouter.swapCallParameters(trade, swapOptions)
+```
+
+### Price Calculation
+
+The slippage is expressed as a **price** with 18 decimals of precision:
+- **For Exact Input**: `price = amountIn * 1e18 / amountOut`
+- **For Exact Output**: `price = amountIn * 1e18 / amountOut`
+
+If the calculated price exceeds `maxHopSlippage[i]`, the transaction will revert with:
+- `V4TooLittleReceivedPerHop` for exact input swaps
+- `V4TooMuchRequestedPerHop` for exact output swaps
+
+### Example: USDC → DAI → WETH
+
+```typescript
+// 2-hop swap: USDC → DAI → WETH
+const swapOptions = {
+  slippageTolerance: new Percent(100, 10000), // 1% overall
+  recipient: userAddress,
+  deadline,
+  maxHopSlippage: [
+    BigNumber.from('1010000000000000000'),     // Hop 0: USDC→DAI, max 1% slippage
+    BigNumber.from('2500000000000000000000'),  // Hop 1: DAI→WETH, max price 2500 DAI/WETH
+  ]
+}
+```
+
+### Benefits
+
+1. **MEV Protection**: Prevents sandwich attacks on individual hops
+2. **Route Quality**: Ensures each segment of a multi-hop route meets expectations
+3. **Granular Control**: Different slippage tolerance for different pairs in a route
+
+### Backward Compatibility
+
+- If `maxHopSlippage` is not provided or is an empty array, only overall slippage is checked (backward compatible)
+- The feature only applies to V4 routes; V2 and V3 routes ignore this parameter
+- Mixed routes with V4 sections will apply per-hop checks only to the V4 portions
+
+## Signed Routes (Universal Router v2.1)
+
+Universal Router v2.1 supports EIP712-signed route execution, enabling gasless transactions and intent-based trading.
+
+**Important**: The SDK does not perform signing. It provides utilities to prepare EIP712 payloads and encode signed calldata. You sign with your own mechanism (wallet, KMS, hardware, etc.).
+
+### Basic Flow
+
+```typescript
+import { SwapRouter, NONCE_SKIP_CHECK } from '@uniswap/universal-router-sdk'
+import { Wallet } from '@ethersproject/wallet'
+
+const wallet = new Wallet('0x...')
+const chainId = 1
+const routerAddress = '0x3fC91A3afd70395Cd496C647d5a6CC9D4B2b7FAD'
+const deadline = Math.floor(Date.now() / 1000) + 60 * 20
+
+// 1. Generate regular swap calldata
+const { calldata, value } = SwapRouter.swapCallParameters(trade, {
+  slippageTolerance: new Percent(50, 10000),
+  recipient: wallet.address,
+  deadline,
+})
+
+// 2. Get EIP712 payload to sign
+const payload = SwapRouter.getExecuteSignedPayload(
+  calldata,
+  {
+    intent: '0x' + '0'.repeat(64),  // Application-specific intent
+    data: '0x' + '0'.repeat(64),    // Application-specific data
+    sender: wallet.address,          // Or address(0) to skip sender verification
+  },
+  deadline,
+  chainId,
+  routerAddress
+)
+
+// 3. Sign externally (wallet/KMS/hardware)
+const signature = await wallet._signTypedData(payload.domain, payload.types, payload.value)
+
+// 4. Encode for executeSigned()
+const { calldata: signedCalldata, value: signedValue } = SwapRouter.encodeExecuteSigned(
+  calldata,
+  signature,
+  {
+    intent: payload.value.intent,
+    data: payload.value.data,
+    sender: payload.value.sender,
+    nonce: payload.value.nonce,  // Must match what was signed
+  },
+  deadline,
+  BigNumber.from(value)
+)
+
+// 5. Submit transaction
+await wallet.sendTransaction({
+  to: routerAddress,
+  data: signedCalldata,
+  value: signedValue,
+})
+```
+
+### Nonce Management
+
+- **Random nonce (default)**: Omit `nonce` parameter - SDK generates random nonce
+- **Skip nonce check**: Use `NONCE_SKIP_CHECK` sentinel to allow signature reuse
+- **Custom nonce**: Provide your own nonce for ordering
+
+```typescript
+import { NONCE_SKIP_CHECK } from '@uniswap/universal-router-sdk'
+
+// Reusable signature (no nonce check)
+const payload = SwapRouter.getExecuteSignedPayload(
+  calldata,
+  {
+    intent: '0x...',
+    data: '0x...',
+    sender: '0x0000000000000000000000000000000000000000',  // Skip sender verification too
+    nonce: NONCE_SKIP_CHECK,  // Allow signature reuse
+  },
+  deadline,
+  chainId,
+  routerAddress
+)
+```
+
+### Sender Verification
+
+- **Verify sender**: Pass the actual sender address (e.g., `wallet.address`)
+- **Skip verification**: Pass `'0x0000000000000000000000000000000000000000'`
+
+The SDK automatically sets `verifySender` based on whether sender is address(0).
+
+## Cross-Chain Bridging with Across (Universal Router v2.1)
+
+Universal Router v2.1 integrates with Across Protocol V3 to enable seamless cross-chain bridging after swaps. This allows you to swap tokens on one chain and automatically bridge them to another chain in a single transaction.
+
+### Basic Usage
+
+```typescript
+import { SwapRouter } from '@uniswap/universal-router-sdk'
+import { BigNumber } from 'ethers'
+
+// 1. Prepare your swap (e.g., USDC → WETH on mainnet)
+const { calldata, value } = SwapRouter.swapCallParameters(
+  trade,
+  swapOptions,
+  [
+    {
+      // Bridge configuration
+      depositor: userAddress,
+      recipient: userAddress,  // Recipient on destination chain
+      inputToken: '0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2',  // WETH mainnet
+      outputToken: '0x4200000000000000000000000000000000000006',   // WETH optimism
+      inputAmount: BigNumber.from('1000000000000000000'),  // 1 WETH
+      outputAmount: BigNumber.from('990000000000000000'),  // 0.99 WETH (with fees)
+      destinationChainId: 10,  // Optimism
+      exclusiveRelayer: '0x0000000000000000000000000000000000000000',
+      quoteTimestamp: Math.floor(Date.now() / 1000),
+      fillDeadline: Math.floor(Date.now() / 1000) + 3600,
+      exclusivityDeadline: 0,
+      message: '0x',
+      useNative: false,
+    }
+  ]
+)
+```
+
+### Swap + Bridge Example
+
+```typescript
+// Swap USDC to WETH, then bridge WETH to Optimism
+const bridgeParams = {
+  depositor: userAddress,
+  recipient: userAddress,  // Can be different address on destination
+  inputToken: WETH_MAINNET,
+  outputToken: WETH_OPTIMISM,
+  inputAmount: CONTRACT_BALANCE,  // Use entire swap output
+  outputAmount: expectedOutputAmount,
+  destinationChainId: 10,
+  exclusiveRelayer: '0x0000000000000000000000000000000000000000',
+  quoteTimestamp: Math.floor(Date.now() / 1000),
+  fillDeadline: Math.floor(Date.now() / 1000) + 3600,
+  exclusivityDeadline: 0,
+  message: '0x',  // Optional message to execute on destination
+  useNative: false,  // Set to true to bridge native ETH
+}
+
+const { calldata, value } = SwapRouter.swapCallParameters(
+  trade,
+  swapOptions,
+  [bridgeParams]  // Array of bridge operations
+)
+```
+
+### Using CONTRACT_BALANCE
+
+When bridging after a swap, you often don't know the exact output amount. Use `CONTRACT_BALANCE` to bridge the entire contract balance:
+
+```typescript
+import { CONTRACT_BALANCE } from '@uniswap/universal-router-sdk'
+
+const bridgeParams = {
+  // ... other params
+  inputAmount: CONTRACT_BALANCE,  // Bridge entire balance after swap
+  // ... other params
+}
+```
+
+### Multiple Bridge Operations
+
+You can perform multiple bridge operations after a swap:
+
+```typescript
+const { calldata, value } = SwapRouter.swapCallParameters(
+  trade,
+  swapOptions,
+  [
+    {
+      // Bridge 50% to Optimism
+      inputToken: WETH_MAINNET,
+      outputToken: WETH_OPTIMISM,
+      inputAmount: BigNumber.from('500000000000000000'),
+      destinationChainId: 10,
+      // ... other params
+    },
+    {
+      // Bridge remaining USDC to Arbitrum
+      inputToken: USDC_MAINNET,
+      outputToken: USDC_ARBITRUM,
+      inputAmount: CONTRACT_BALANCE,
+      destinationChainId: 42161,
+      // ... other params
+    }
+  ]
+)
+```
+
+### Native ETH Bridging
+
+To bridge native ETH instead of WETH:
+
+```typescript
+const bridgeParams = {
+  inputToken: WETH_ADDRESS,  // Must be WETH address
+  outputToken: WETH_ON_DESTINATION,
+  useNative: true,  // Bridge as native ETH
+  // ... other params
+}
+```
+
+### Important Notes
+
+1. **Across Quote**: Bridge parameters (especially `outputAmount`, `quoteTimestamp`, `fillDeadline`) should come from the Across API quote
+2. **Recipient Address**: Can be different from the sender, allowing cross-chain transfers to other addresses
+3. **Message Passing**: The `message` field allows executing arbitrary calls on the destination chain
+4. **Slippage**: The `outputAmount` already accounts for bridge fees and slippage

package/dist/entities/actions/across.d.ts

@@ -0,0 +1,21 @@
+import { BigNumberish } from 'ethers';
+/**
+ * Parameters for Across V4 Deposit V3 command
+ * Used for cross-chain bridging via Across Protocol V3 SpokePool
+ */
+export declare type AcrossV4DepositV3Params = {
+    depositor: string;
+    recipient: string;
+    inputToken: string;
+    outputToken: string;
+    inputAmount: BigNumberish;
+    outputAmount: BigNumberish;
+    destinationChainId: number;
+    exclusiveRelayer: string;
+    quoteTimestamp: number;
+    fillDeadline: number;
+    exclusivityDeadline: number;
+    message: string;
+    useNative: boolean;
+};
+export { CONTRACT_BALANCE } from '../../utils/constants';

package/dist/entities/actions/index.d.ts

@@ -1,2 +1,3 @@
 export * from './uniswap';
 export * from './unwrapWETH';
+export * from './across';

package/dist/entities/actions/uniswap.d.ts

@@ -3,7 +3,7 @@ import { Trade as RouterTrade, SwapOptions as RouterSwapOptions } from '@uniswap
 import { Permit2Permit } from '../../utils/inputTokens';
 import { Currency, TradeType } from '@uniswap/sdk-core';
 import { Command, RouterActionType, TradeConfig } from '../Command';
-import { BigNumberish } from 'ethers';
+import { BigNumber, BigNumberish } from 'ethers';
 export declare type FlatFeeOptions = {
     amount: BigNumberish;
     recipient: string;
@@ -13,6 +13,7 @@ export declare type SwapOptions = Omit<RouterSwapOptions, 'inputTokenPermit'> &
     inputTokenPermit?: Permit2Permit;
     flatFee?: FlatFeeOptions;
     safeMode?: boolean;
+    maxHopSlippage?: BigNumber[];
 };
 export declare class UniswapTrade implements Command {
     trade: RouterTrade<Currency, Currency, TradeType>;

package/dist/index.d.ts

@@ -1,5 +1,5 @@
 export { SwapRouter } from './swapRouter';
-export type { MigrateV3ToV4Options } from './swapRouter';
+export type { MigrateV3ToV4Options, SignedRouteOptions, EIP712Payload } from './swapRouter';
 export * from './entities';
 export * from './utils/routerTradeAdapter';
 export { RoutePlanner, CommandType, COMMAND_DEFINITION, Parser, Subparser } from './utils/routerCommands';
@@ -8,3 +8,4 @@ export { UNIVERSAL_ROUTER_CREATION_BLOCK, UNIVERSAL_ROUTER_ADDRESS, ROUTER_AS_RE
 export { CommandParser, GenericCommandParser } from './utils/commandParser';
 export type { UniversalRouterCommand, UniversalRouterCall, Param, CommandsDefinition } from './utils/commandParser';
 export type { Permit2Permit } from './utils/inputTokens';
+export { NONCE_SKIP_CHECK, generateNonce, EXECUTE_SIGNED_TYPES, getUniversalRouterDomain } from './utils/eip712';

package/dist/swapRouter.d.ts

@@ -1,10 +1,12 @@
 import { Interface } from '@ethersproject/abi';
-import { BigNumberish } from 'ethers';
+import { BigNumber, BigNumberish } from 'ethers';
 import { MethodParameters, Position as V3Position, RemoveLiquidityOptions as V3RemoveLiquidityOptions } from '@uniswap/v3-sdk';
 import { Position as V4Position, AddLiquidityOptions as V4AddLiquidityOptions } from '@uniswap/v4-sdk';
 import { Trade as RouterTrade } from '@uniswap/router-sdk';
 import { Currency, TradeType } from '@uniswap/sdk-core';
 import { SwapOptions } from './entities/actions/uniswap';
+import { AcrossV4DepositV3Params } from './entities/actions/across';
+import { TypedDataDomain, TypedDataField } from '@ethersproject/abstract-signer';
 export declare type SwapRouterConfig = {
     sender?: string;
     deadline?: BigNumberish;
@@ -15,9 +17,28 @@ export interface MigrateV3ToV4Options {
     v3RemoveLiquidityOptions: V3RemoveLiquidityOptions;
     v4AddLiquidityOptions: V4AddLiquidityOptions;
 }
+export declare type SignedRouteOptions = {
+    intent: string;
+    data: string;
+    sender: string;
+    nonce?: string;
+};
+export declare type EIP712Payload = {
+    domain: TypedDataDomain;
+    types: Record<string, TypedDataField[]>;
+    value: {
+        commands: string;
+        inputs: string[];
+        intent: string;
+        data: string;
+        sender: string;
+        nonce: string;
+        deadline: string;
+    };
+};
 export declare abstract class SwapRouter {
     static INTERFACE: Interface;
-    static swapCallParameters(trades: RouterTrade<Currency, Currency, TradeType>, options: SwapOptions): MethodParameters;
+    static swapCallParameters(trades: RouterTrade<Currency, Currency, TradeType>, options: SwapOptions, bridgeOptions?: AcrossV4DepositV3Params[]): MethodParameters;
     /**
      * Builds the call parameters for a migration from a V3 position to a V4 position.
      * Some requirements of the parameters:
@@ -27,6 +48,29 @@ export declare abstract class SwapRouter {
      *   - V3 NFT must be approved, or valid inputV3NFTPermit must be provided with UR as spender
      */
     static migrateV3ToV4CallParameters(options: MigrateV3ToV4Options, positionManagerOverride?: string): MethodParameters;
+    /**
+     * Generate EIP712 payload for signed execution (no signing performed)
+     * Decodes existing execute() calldata and prepares it for signing
+     *
+     * @param calldata The calldata from swapCallParameters() or similar
+     * @param signedOptions Options for signed execution (intent, data, sender, nonce)
+     * @param deadline The deadline timestamp
+     * @param chainId The chain ID
+     * @param routerAddress The Universal Router contract address
+     * @returns EIP712 payload ready to be signed externally
+     */
+    static getExecuteSignedPayload(calldata: string, signedOptions: SignedRouteOptions, deadline: BigNumberish, chainId: number, routerAddress: string): EIP712Payload;
+    /**
+     * Encode executeSigned() call with signature
+     *
+     * @param calldata The original calldata from swapCallParameters()
+     * @param signature The signature obtained from external signing
+     * @param signedOptions The same options used in getExecuteSignedPayload()
+     * @param deadline The deadline timestamp
+     * @param nativeCurrencyValue The native currency value (ETH) to send
+     * @returns Method parameters for executeSigned()
+     */
+    static encodeExecuteSigned(calldata: string, signature: string, signedOptions: SignedRouteOptions, deadline: BigNumberish, nativeCurrencyValue?: BigNumber): MethodParameters;
     /**
      * Encodes a planned route into a method name and parameters for the Router contract.
      * @param planner the planned route