@underpostnet/cyberia 3.2.90 → 3.3.73

package/deploy/lib/github-actions-logging.sh

@@ -0,0 +1,594 @@
+# Logging helpers for deploy/<deploy-id>/*.sh. Sourced, never executed directly.
+#
+# Deploy script contract:
+# - deploy_start once for the run's title, prepare_host from lib/host.sh next,
+#   then one deploy_step call per remote command, each with its own label
+# - the body lives in main(), invoked on the last line: the first remote command
+#   pulls this repository, rewriting the running script while bash reads it
+#
+# deploy_step is the entry point every deploy script uses. run_quiet stays the
+# mechanism underneath it, for the rare caller that needs a different report
+# pattern or passthrough window.
+#
+# run_quiet hides normal output and returns the command's exit status so
+# `set -e` stops the deployment. Lines matching `patterns` that parse as a
+# deployment pod report are folded into a table — one row per pod, three columns
+# wide — instead of being streamed; the monitor's raw `deploy-monitor` JSON emits
+# are consumed into that table's cells rather than printed. The monitor
+# iteration and its clock are per frame, not per pod, so they title the table
+# rather than repeating down a column of every row. Anything else within
+# `lines_after` lines of a match scrolls above the table. On failure it keeps
+# two temp files and prints their paths in red instead of their contents: the
+# error trace and the full unfiltered log up to the error. The trace is stderr
+# plus the failing tail of the merged log, because the engine CLI reports through
+# its logger and that writes to stdout — stderr alone routinely holds nothing but
+# git progress output.
+#
+# The table renders three ways, because a log viewer is not a terminal:
+# - terminal: redrawn in place, cursor relative, one frame at a time
+# - CI (GITHUB_ACTIONS/RUN_QUIET_CI): no cursor addressing exists there, so the
+#   changed rows stream inside a collapsed `::group::` and the final table is
+#   printed after it, expanded
+# - anywhere else: changed rows appended
+# Colour is ANSI SGR only and is emitted in all three (GitHub renders SGR in
+# step logs); NO_COLOR or RUN_QUIET_PLAIN turns it off.
+
+if [ -n "${NO_COLOR:-}${RUN_QUIET_PLAIN:-}" ]; then
+    RUN_QUIET_RED=''
+    RUN_QUIET_RESET=''
+else
+    RUN_QUIET_RED=$'\033[0;31m'
+    RUN_QUIET_RESET=$'\033[0m'
+fi
+
+RUN_QUIET_NODE_NAME=$(hostname 2>/dev/null | tr '[:upper:]' '[:lower:]')
+RUN_QUIET_NODE_TAG=${RUN_QUIET_NODE_NAME:+ [$RUN_QUIET_NODE_NAME]}
+
+# The report pattern and the passthrough window describe the deployment log
+# format, not any one step, so they are declared once here instead of being
+# repeated at every call site.
+DEPLOY_REPORT_PATTERN='Target pod:'
+DEPLOY_REPORT_LINES_AFTER=14
+
+# Titles a deploy run, in the same shape as the step lines below it.
+deploy_start() {
+    echo "$RUN_QUIET_NODE_TAG $(date -Is) ▶▶ $1"
+}
+
+# One deploy step: a label and the command that carries it.
+deploy_step() {
+    local label="$1"
+    shift
+
+    run_quiet "$label" "$DEPLOY_REPORT_PATTERN" "$DEPLOY_REPORT_LINES_AFTER" "$@"
+}
+
+run_quiet() {
+    local label="$1"
+    local patterns="$2"
+    local lines_after="$3"
+    shift 3
+    
+    local debug_log
+    local error_log
+    local fail_flag
+    local fatal
+    local reason
+    local fifo_dir
+    local filter_pid
+    local stderr_pid
+    local color=0
+    local groups=0
+    local redraw=0
+    local width=0
+    local rows=0
+    local status=0
+    
+    echo "$RUN_QUIET_NODE_TAG $(date -Is) ▶ $label"
+    
+    [ -n "${NO_COLOR:-}${RUN_QUIET_PLAIN:-}" ] || color=1
+    
+    if [ -t 1 ] && [ "${TERM:-dumb}" != dumb ] && [ -z "${RUN_QUIET_PLAIN:-}" ]; then
+        redraw=1
+        width=${COLUMNS:-0}
+        [ "$width" -gt 0 ] 2>/dev/null || width=$(tput cols 2>/dev/null || echo 0)
+        rows=${LINES:-0}
+        [ "$rows" -gt 0 ] 2>/dev/null || rows=$(tput lines 2>/dev/null || echo 0)
+        # Without a known width a long row wraps, and the cursor-up count that
+        # addresses the table no longer matches the lines it printed.
+        [ "$width" -ge 20 ] || redraw=0
+    fi
+    
+    if [ "$redraw" -eq 0 ] && [ -z "${RUN_QUIET_PLAIN:-}" ] && [ -n "${GITHUB_ACTIONS:-}${RUN_QUIET_CI:-}" ]; then
+        groups=1
+    fi
+    
+    debug_log=$(mktemp --suffix=.debug.log)
+    error_log=$(mktemp --suffix=.error.log)
+    fail_flag=$(mktemp --suffix=.fatal)
+    : >"$fail_flag"
+    fifo_dir=$(mktemp -d)
+    mkfifo "$fifo_dir/merged" "$fifo_dir/stderr"
+    
+    # The filter reads the live stream rather than the finished log: a deployment
+    # monitor prints its report for minutes before exiting, so a pass over the
+    # completed file would show nothing until then. fflush defeats awk's block
+    # buffering, which otherwise withholds output whenever stdout is a pipe.
+    # awk writes the debug log itself rather than piping through tee, so the
+    # reader stays a single process that a kill can always release.
+    #
+    # On a terminal the table is the only live region and always sits at the
+    # bottom: rows are overwritten one by one (cursor up, then erase to end of
+    # line as each row is rewritten) so the section never blanks between frames,
+    # and a passthrough line is printed after erasing the table and before
+    # drawing it again. All of that is cursor relative, so every row must occupy
+    # exactly one terminal line: rows are cut to the terminal width, counting
+    # display columns rather than bytes so colour escapes neither inflate the
+    # measurement nor get sliced in half. Elsewhere nothing is cut and nothing
+    # is overwritten — the frames stream, folded into a CI group when there is
+    # one to fold them into.
+    awk \
+    -v pattern="$patterns" \
+    -v lines_after="$lines_after" \
+    -v debug_log="$debug_log" \
+    -v redraw="$redraw" \
+    -v color="$color" \
+    -v groups="$groups" \
+    -v label="$label" \
+    -v width="$width" \
+    -v rows="$rows" \
+    -v started="$(date +%H:%M:%S)" \
+    -v fail_flag="$fail_flag" \
+    -v handoff="$RUN_QUIET_NODE_TAG $(date -Is) ▶ Switch traffic" '
+        function strip(s) {
+            gsub(esc_seq, "", s)
+            return s
+        }
+        function pad(s, w) {
+            while (length(s) < w) s = s " "
+            return s
+        }
+        # Pod names differ in their tail, so a name too wide for its column keeps
+        # the end rather than the deploy prefix every pod shares.
+        function trim(s, w) {
+            return length(s) <= w ? s : ".." substr(s, length(s) - w + 3)
+        }
+        function rule(n,   r) {
+            r = ""
+            while (n-- > 0) r = r "-"
+            return r
+        }
+        function paint(s, sgr) {
+            return color ? esc "[" sgr "m" s esc "[0m" : s
+        }
+        function fit(s,   out, visible) {
+            if (!redraw) return s
+            out = ""
+            visible = 0
+            while (length(s) > 0) {
+                if (match(s, "^" esc_seq)) {
+                    out = out substr(s, 1, RLENGTH)
+                    s = substr(s, RLENGTH + 1)
+                    continue
+                }
+                if (visible >= width - 1) return out esc "[0m"
+                out = out substr(s, 1, 1)
+                s = substr(s, 2)
+                visible++
+            }
+            return out
+        }
+        function put(line) {
+            printf "%s%s\n", fit(line), redraw ? esc "[K" : ""
+            fflush()
+        }
+        # GitHub renders no cursor motion, so the live region becomes a
+        # collapsed section: every frame streams into it and the settled table
+        # is reprinted outside it.
+        function open_group() {
+            if (!groups || group_open) return
+            group_open = 1
+            printf "::group::%s monitor frames\n", label
+            fflush()
+        }
+        function close_group() {
+            if (!group_open) return
+            group_open = 0
+            # The next run of rows opens its own section, and a section starts
+            # with its title and header.
+            appended_header = 0
+            appended_cycle = 0
+            printf "::endgroup::\n"
+            fflush()
+        }
+        function final_table(   i) {
+            if (!groups || pod_count == 0) return
+            close_group()
+            measure()
+            title_line()
+            header_lines()
+            for (i = 1; i <= pod_count; i++) pod_line(pods[i])
+        }
+        function json_value(key,   found) {
+            if (!match($0, "\"" key "\"[ ]*:[ ]*\"[^\"]*\"")) return ""
+            found = substr($0, RSTART, RLENGTH)
+            sub("^\"" key "\"[ ]*:[ ]*\"", "", found)
+            sub("\"$", "", found)
+            return found
+        }
+        function apply_event(   was_k8s_ready, was_runtime_ready, i) {
+            events_seen = 1
+            was_k8s_ready = k8s_ready
+            was_runtime_ready = runtime_ready
+            if (event_phase == "kubernetes") k8s_ready = (event_state == "pod_ready")
+            else if (event_phase == "runtime") {
+                runtime_ready = (event_state == "runtime_ready")
+                if (event_status != "") last_runtime = event_status
+                if (is_fatal(event_status)) note_fatal("runtime event", "status=" event_status)
+            }
+            if (redraw) {
+                if (drawn > 0) {
+                    clear_table()
+                    draw_table()
+                }
+                return
+            }
+            # Readiness reaches the cells through the events alone, so without a
+            # live table it is the only thing that can move a row.
+            if (was_k8s_ready == k8s_ready && was_runtime_ready == runtime_ready) return
+            for (i = 1; i <= pod_count; i++) append_row(pods[i])
+        }
+        # Both phases confirmed is the monitor signing off; the hand-off waits
+        # for the report lines of that iteration so the table lands on its final
+        # frame first.
+        function ready_pending() {
+            return events_seen ? (k8s_ready && runtime_ready) : all_pods_running()
+        }
+        # One report line per pod: "Target pod: NAME | Pod status: X | Runtime status: Y".
+        function read_pod_line(line,   plain, cell, pod, k8s, runtime) {
+            plain = strip(line)
+            if (plain !~ /^Target pod: /) return 0
+            if (split(plain, cell, / \| /) < 3) return 0
+            pod = cell[1]; sub(/^Target pod:[ ]*/, "", pod)
+            k8s = cell[2]; sub(/^Pod status:[ ]*/, "", k8s)
+            runtime = cell[3]; sub(/^Runtime status:[ ]*/, "", runtime)
+            if (pod == "") return 0
+            if (is_fatal(runtime)) note_fatal("pod " pod, "runtime status=" runtime)
+            if (!(pod in pod_row)) {
+                pod_row[pod] = ++pod_count
+                pods[pod_count] = pod
+            }
+            # The report itself is unstamped: the clock is the one the monitor
+            # printed for this iteration, so the title advances with the run.
+            cycle_time = last_time != "" ? last_time : started
+            pod_k8s[pod] = k8s
+            pod_runtime[pod] = runtime
+            current_pod = pod
+            return 1
+        }
+        # Every pod reporting its expected runtime status with no pending
+        # marker is what the deployment itself calls ready. `error` is
+        # the fatal value in the RUNTIME_STATUS contract: a terminal state, not a
+        # ready one, and reading it as ready handed off to the traffic switch on
+        # a deployment that had already failed.
+        function all_pods_running(   i, pod, runtime) {
+            if (pod_count == 0) return 0
+            for (i = 1; i <= pod_count; i++) {
+                pod = pods[i]
+                if (pod_k8s[pod] != "Running") return 0
+                runtime = runtime_cell(pod)
+                if (runtime == "" || runtime ~ /pending/ || is_fatal(runtime)) return 0
+            }
+            return 1
+        }
+        # The bare contract value, not a substring: a phase name that merely
+        # contains it (or a log line quoting it) is not a fatal latch.
+        function is_fatal(status) {
+            return status == "error"
+        }
+        # Stack frames and source URLs carry absolute host paths and module layout,
+        # which must not reach a CI transcript. Both log files still hold them.
+        function is_trace(line) {
+            return line ~ /^[ \t]*at [^ ]/ || line ~ /file:\/\/\// || line ~ /^[ \t]*at async / || line ~ /^[A-Za-z_]*Error: /
+        }
+        # Records the fatal latch for run_quiet. A step can report this and still
+        # exit 0 — the in-pod lifecycle deliberately does not crash the container
+        # — so the exit status alone cannot be trusted to stop the deployment.
+        function note_fatal(source, detail) {
+            if (fatal_seen) return
+            fatal_seen = 1
+            printf "%s: %s\n", source, detail > fail_flag
+            close(fail_flag)
+        }
+        # The table stops being a live region here: the deployment is handing
+        # over to the traffic switch, so the last frame stays on screen and the
+        # chatter the runner prints below it is dropped.
+        function hand_off() {
+            handed_off = 1
+            remaining = 0
+            drawn = 0
+            last_pod_line = 0
+            final_table()
+            put(handoff)
+        }
+        # A later monitor in the same command (a second colour, a rollback) opens
+        # its own table below the one that was handed off.
+        function reset_table() {
+            close_group()
+            handed_off = 0
+            events_seen = 0
+            k8s_ready = 0
+            runtime_ready = 0
+            pod_count = 0
+            cycles = 0
+            cycle_time = ""
+            appended_header = 0
+            appended_cycle = 0
+            drawn = 0
+            delete pods
+            delete pod_row
+            delete pod_k8s
+            delete pod_runtime
+            delete last_row
+        }
+        # pod_ready is a deployment-wide event: it only annotates a pod whose
+        # own phase already agrees, never a stale one still coming up.
+        function k8s_cell(pod,   cell) {
+            cell = pod_k8s[pod]
+            return (k8s_ready && cell == "Running") ? cell " (ready)" : cell
+        }
+        function runtime_cell(pod) {
+            return pod_runtime[pod] != "" ? pod_runtime[pod] : last_runtime
+        }
+        # Columns only ever grow: a cell that shrinks must not reflow the table
+        # under the reader between frames.
+        function measure(   i, pod, over, budget) {
+            for (i = 1; i <= pod_count; i++) {
+                pod = pods[i]
+                if (length(pod) > w_pod) w_pod = length(pod)
+                if (length(k8s_cell(pod)) > w_k8s) w_k8s = length(k8s_cell(pod))
+                if (length(runtime_cell(pod)) > w_runtime) w_runtime = length(runtime_cell(pod))
+            }
+            # 10 columns of borders and padding. On a narrow terminal the pod
+            # column gives up room first, then the status columns, before fit()
+            # starts cutting cells off the right edge.
+            w_pod_fit = w_pod
+            w_runtime_fit = w_runtime
+            w_k8s_fit = w_k8s
+            # A streamed table cannot re-pad the rows it already printed, so the
+            # status columns start wide enough for the values the monitor is
+            # known to report and stop drifting under the header.
+            if (!redraw) {
+                if (w_k8s_fit < 17) w_k8s_fit = 17
+                if (w_runtime_fit < 28) w_runtime_fit = 28
+                return
+            }
+            # fit() cuts the last column, so the row has to land inside it.
+            budget = width - 1
+            over = row_width() - budget
+            if (over > 0) {
+                w_pod_fit = w_pod_fit - over < 12 ? 12 : w_pod_fit - over
+                over = row_width() - budget
+            }
+            if (over > 0) {
+                w_runtime_fit = w_runtime_fit - over < 16 ? 16 : w_runtime_fit - over
+                over = row_width() - budget
+            }
+            if (over > 0) w_k8s_fit = w_k8s_fit - over < 12 ? 12 : w_k8s_fit - over
+        }
+        function row_width() {
+            return w_pod_fit + w_k8s_fit + w_runtime_fit + 10
+        }
+        # The iteration and the clock are one per frame, not one per pod: they
+        # title the table instead of repeating down two columns of it.
+        function title_line() {
+            put(paint(sprintf("%s (refresh #%d, %s)", label, cycles,
+            cycle_time != "" ? cycle_time : started), "1"))
+        }
+        function header_lines() {
+            put(paint(sprintf("| %s | %s | %s |", pad("POD NAME", w_pod_fit),
+            pad("K8S STATUS", w_k8s_fit), pad("RUNTIME STATUS", w_runtime_fit)), "1"))
+            put(paint(sprintf("|%s|%s|%s|", rule(w_pod_fit + 2), rule(w_k8s_fit + 2),
+            rule(w_runtime_fit + 2)), "2"))
+        }
+        function pod_line(pod,   runtime) {
+            runtime = runtime_cell(pod)
+            put(sprintf("| %s | %s | %s |",
+            paint(pad(trim(pod, w_pod_fit), w_pod_fit), "1"),
+            paint(pad(trim(k8s_cell(pod), w_k8s_fit), w_k8s_fit), k8s_ready ? "32" : "33"),
+            paint(pad(trim(runtime, w_runtime_fit), w_runtime_fit), (runtime ~ /pending/ || !runtime_ready) ? "36" : "32")))
+        }
+        function clear_table() {
+            if (!redraw || drawn == 0) return
+            printf "%s[%dA%s[J", esc, drawn, esc
+            drawn = 0
+        }
+        function draw_table(   i) {
+            if (!redraw || pod_count == 0) return
+            # A table taller than the screen scrolls, and the cursor-up count no
+            # longer addresses the rows it drew; degrade to appended rows.
+            if (rows > 0 && pod_count + 3 >= rows) {
+                redraw = 0
+                drawn = 0
+                return
+            }
+            measure()
+            title_line()
+            header_lines()
+            for (i = 1; i <= pod_count; i++) pod_line(pods[i])
+            drawn = pod_count + 3
+        }
+        # Without a live table a row is only worth printing when its cells
+        # actually moved; the iteration count alone is not a change. The title is
+        # reprinted whenever a later iteration is the one moving rows, so a
+        # streamed row is still dated without carrying its own clock column.
+        function append_row(pod,   cells) {
+            cells = pod "|" k8s_cell(pod) "|" runtime_cell(pod)
+            if (cells == last_row[pod]) return
+            last_row[pod] = cells
+            measure()
+            open_group()
+            if (appended_cycle != cycles) {
+                title_line()
+                appended_cycle = cycles
+            }
+            if (!appended_header) {
+                header_lines()
+                appended_header = 1
+            }
+            pod_line(pod)
+        }
+        BEGIN {
+            w_pod = length("POD NAME")
+            w_k8s = length("K8S STATUS")
+            w_runtime = length("RUNTIME STATUS")
+            group_open = 0
+            esc = sprintf("%c", 27)
+            esc_seq = esc "\\[[0-9;]*[A-Za-z]"
+            clock = "[0-9][0-9]:[0-9][0-9]:[0-9][0-9]"
+            json_open = "deploy-monitor:[ ]*[{]"
+            json_close = "^[ \t]*[}],?[ \t]*$"
+        }
+        {
+            print > debug_log
+            # The monitor stamps its own lines in local time; the ISO field
+            # inside an emit is UTC, so it never feeds the column.
+            if ($0 !~ /"timestamp"/ && match(strip($0), clock)) last_time = substr(strip($0), RSTART, RLENGTH)
+        }
+        {
+            if (!handed_off && $0 !~ pattern && ready_pending()) hand_off()
+            if (handed_off) {
+                if ($0 !~ pattern) next
+                reset_table()
+            }
+            # The monitor JSON is state already carried by the table cells: it is
+            # consumed here and never reaches the terminal.
+            if (in_json) {
+                if ($0 ~ json_close) {
+                    in_json = 0
+                    apply_event()
+                } else {
+                    if (json_value("phase") != "") event_phase = json_value("phase")
+                    if (json_value("state") != "") event_state = json_value("state")
+                    if (json_value("status") != "") event_status = json_value("status")
+                }
+                if (remaining > 0) remaining--
+                last_pod_line = 0
+                next
+            }
+            if ($0 ~ json_open) {
+                in_json = 1
+                event_phase = event_state = event_status = ""
+                if (remaining > 0) remaining--
+                last_pod_line = 0
+                next
+            }
+            if (read_pod_line($0)) {
+                # Pod reports arrive back to back, one per pod, once per monitor
+                # iteration: the first of a run opens a new cycle.
+                if (!last_pod_line) cycles++
+                last_pod_line = 1
+                remaining = lines_after + 1
+                if (redraw) {
+                    clear_table()
+                    draw_table()
+                }
+                if (!redraw) append_row(current_pod)
+                next
+            }
+            last_pod_line = 0
+            if ($0 ~ pattern) remaining = lines_after + 1
+            if (remaining > 0) {
+                if (is_trace($0)) {
+                    remaining--
+                    next
+                }
+                clear_table()
+                close_group()
+                put($0)
+                remaining--
+                draw_table()
+            }
+        }
+        END {
+            if (!handed_off && ready_pending()) hand_off()
+            close_group()
+        }
+    ' <"$fifo_dir/merged" &
+    filter_pid=$!
+    
+    # stderr is duplicated: on its own for the native error and stack trace, and
+    # into the merged stream so both the debug log and the filter see it in
+    # chronological order with stdout.
+    tee -a "$error_log" <"$fifo_dir/stderr" >"$fifo_dir/merged" &
+    stderr_pid=$!
+    
+    "$@" >"$fifo_dir/merged" 2>"$fifo_dir/stderr" || status=$?
+    
+    # Drain both readers before the paths are printed, or the trace can still be
+    # in flight. Bounded: a command that leaks a child holding a stream open must
+    # not hang the deployment, and by then everything read has been written.
+    run_quiet_drain "$stderr_pid"
+    run_quiet_drain "$filter_pid"
+    rm -rf "$fifo_dir"
+    
+    # A deployment can fail without the command failing. The in-pod lifecycle latches
+    # `container-status=error` and deliberately does not crash the container, so a step that
+    # reported a fatal runtime state can still exit 0 — and a green step here is a green
+    # GitHub Actions job on a deployment that never came up. The latch the filter recorded is
+    # therefore promoted to a failure exit of its own.
+    fatal=$(cat "$fail_flag" 2>/dev/null) || true
+    rm -f "$fail_flag"
+    if [ "$status" -eq 0 ] && [ -n "$fatal" ]; then
+        status=1
+        printf '%s✖ %s reported a fatal runtime state but exited 0 (%s)%s\n' \
+        "$RUN_QUIET_RED" "$label" "$fatal" "$RUN_QUIET_RESET" >&2
+    fi
+    
+    if [ "$status" -ne 0 ]; then
+        run_quiet_error_trace "$debug_log" "$error_log"
+        # One line of why, never the trace: the filter drops trace lines from the window.
+        reason=$(grep -a -m1 -E '^[A-Za-z]*Error: |reported runtime status=' "$debug_log" 2>/dev/null | head -1) || true
+        printf '%s✖ %s failed (exit %s)%s\n' "$RUN_QUIET_RED" "$label" "$status" "$RUN_QUIET_RESET" >&2
+        [ -n "$reason" ] && printf '%s  reason:      %s%s\n' "$RUN_QUIET_RED" "$reason" "$RUN_QUIET_RESET" >&2
+        printf '%s  error trace: %s\n  debug log:   %s%s\n' \
+        "$RUN_QUIET_RED" "$error_log" "$debug_log" "$RUN_QUIET_RESET" >&2
+        return "$status"
+    fi
+    
+    rm -f "$debug_log" "$error_log"
+    
+    return "$status"
+}
+
+# Appends the failing part of the merged log to the error trace, so the trace ends
+# with the error rather than with whatever last wrote to stderr. Cuts from the first
+# error marker; with no marker the tail stands in, which is where a logger-only
+# failure reports itself.
+run_quiet_error_trace() {
+    local debug_log="$1"
+    local error_log="$2"
+    local tail_lines="${3:-40}"
+    local first
+    
+    # grep exits 1 when it matches nothing, and every deploy script runs under `set -e` with
+    # `pipefail`: unguarded, a failing step whose log carries no marker aborted this function
+    # before run_quiet could print the exit code and the two log paths, and the tail fallback
+    # below was unreachable. The no-match case is the fallback's trigger, not an error.
+    first=$(grep -a -n -m1 -E 'Error:|Error \[|^[[:space:]]+at |✖' "$debug_log" 2>/dev/null | cut -d: -f1) || true
+    
+    printf -- '--- error trace (from merged log) ---\n' >>"$error_log"
+    if [ -n "$first" ]; then
+        tail -n "+$first" "$debug_log" >>"$error_log"
+    else
+        tail -n "$tail_lines" "$debug_log" >>"$error_log"
+    fi
+}
+
+run_quiet_drain() {
+    local pid="$1"
+    
+    timeout 10 tail --pid="$pid" -f /dev/null 2>/dev/null || true
+    kill "$pid" 2>/dev/null || true
+    wait "$pid" 2>/dev/null || true
+}