@typescript-deploys/pr-build 4.5.0-pr-45742-5 → 4.5.0-pr-45884-2

package/lib/cs/diagnosticMessages.generated.json

@@ -969,6 +969,7 @@
   "Option_incremental_can_only_be_specified_using_tsconfig_emitting_to_single_file_or_when_option_tsBui_5074": "Možnost ‚--incremental‘ se dá zadat jen pomocí tsconfig, při generování do jednoho souboru nebo když se zadá možnost ‚--tsBuildInfoFile‘.",
   "Option_isolatedModules_can_only_be_used_when_either_option_module_is_provided_or_option_target_is_ES_5047": "Možnost isolatedModules jde použít jenom v případě, že je poskytnutá možnost --module nebo že možnost target je ES2015 nebo vyšší verze.",
   "Option_preserveConstEnums_cannot_be_disabled_when_isolatedModules_is_enabled_5091": "Když je povolená možnost isolatedModules, možnost preserveConstEnums se nedá zakázat.",
+  "Option_preserveValueImports_can_only_be_used_when_module_is_set_to_es2015_or_later_5095": "Možnost preserveValueImports se dá použít jenom v případě, že je modul nastavený na hodnotu es2015 nebo novější.",
   "Option_project_cannot_be_mixed_with_source_files_on_a_command_line_5042": "Možnost project se na příkazovém řádku nedá kombinovat se zdrojovým souborem.",
   "Option_resolveJsonModule_can_only_be_specified_when_module_code_generation_is_commonjs_amd_es2015_or_5071": "Možnost --resolveJsonModule se dá zadat jen v případě, že generování kódu modulu je commonjs, amd, es2015 nebo esNext.",
   "Option_resolveJsonModule_cannot_be_specified_without_node_module_resolution_strategy_5070": "Možnost --resolveJsonModule se nedá zadat bez strategie překladu modulu node.",
@@ -1033,6 +1034,7 @@
   "Prefix_all_incorrect_property_declarations_with_declare_95095": "Před všechny nesprávné deklarace vlastností přidejte declare.",
   "Prefix_all_unused_declarations_with_where_possible_95025": "Přidat příponu _ ke všem nepoužívaným deklaracím tam, kde je to možné",
   "Prefix_with_declare_95094": "Přidat předponu declare",
+  "Preserve_unused_imported_values_in_the_JavaScript_output_that_would_otherwise_be_removed_1449": "Zachovejte nepoužívané importované hodnoty ve výstupu JavaScriptu, který by se jinak odebral.",
   "Print_all_of_the_files_read_during_the_compilation_6653": "Vytiskněte si všechny soubory přečtené při kompilaci.",
   "Print_files_read_during_the_compilation_including_why_it_was_included_6631": "Vytiskněte si soubory přečtené při kompilaci, včetně důvodu jejich zahrnutí.",
   "Print_names_of_files_and_the_reason_they_are_part_of_the_compilation_6505": "Umožňuje vypsat názvy souborů a důvod, proč jsou součástí kompilace.",
@@ -1628,6 +1630,7 @@
   "_0_index_signatures_are_incompatible_2634": "Signatury indexu {0} jsou nekompatibilní.",
   "_0_index_type_1_is_not_assignable_to_2_index_type_3_2413": "{0} Typ indexu {1} se nedá přiřadit k {2} typu indexu {3}.",
   "_0_is_a_primitive_but_1_is_a_wrapper_object_Prefer_using_0_when_possible_2692": "{0} je primitivum, ale {1} je obálkový objekt. Pokud je to možné, použijte raději {0}.",
+  "_0_is_a_type_and_must_be_imported_using_a_type_only_import_when_preserveValueImports_and_isolatedMod_1444": "Hodnota {0} je typ a musí být importována pomocí importu, který se bude zadávat jenom v případě, že jsou povolené parametry preserveValueImports a isolatedModules.",
   "_0_is_assignable_to_the_constraint_of_type_1_but_1_could_be_instantiated_with_a_different_subtype_of_5075": "{0} se dá přiřadit k omezení typu {1}, ale pro {1} se dala vytvořit instance s jiným podtypem omezení {2}.",
   "_0_is_declared_but_its_value_is_never_read_6133": "Deklaruje se {0}, ale jeho hodnota se vůbec nečte.",
   "_0_is_declared_but_never_used_6196": "{0} se nadeklarovalo, ale nepoužilo.",
@@ -1660,6 +1663,9 @@
   "_0_only_refers_to_a_type_but_is_being_used_as_a_value_here_Do_you_need_to_change_your_target_library_2585": "‚{0}‘ odkazuje jen na typ, ale tady se používá jako hodnota. Potřebujete změnit cílovou knihovnu? Zkuste změnit možnost kompilátoru ‚lib‘ na es2015 nebo novější.",
   "_0_refers_to_a_UMD_global_but_the_current_file_is_a_module_Consider_adding_an_import_instead_2686": "{0} odkazuje na globální UMD, ale aktuální soubor je modul. Zvažte raději přidání importu.",
   "_0_refers_to_a_value_but_is_being_used_as_a_type_here_Did_you_mean_typeof_0_2749": "{0} odkazuje na hodnotu, ale tady se používá jako typ. Měli jste na mysli typeof {0}?",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_imported_using_a_type_only_import_when_preserveVa_1446": "Hodnota {0} se překládá na deklaraci jenom typu a musí být importována pomocí importu, který se bude zadávat jenom v případě, že jsou povolené parametry preserveValueImports a isolatedModules.",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_re_exported_using_a_type_only_re_export_when_isol_1448": "Hodnota {0} se překládá na deklaraci jenom typu a musí se znovu exportovat pomocí zpětného exportu jenom typu, když je povolená vlastnost isolatedModules.",
+  "_0_should_be_set_inside_the_compilerOptions_object_of_the_config_json_file_6258": "Klíčové slovo {0} by mělo být nastaveno uvnitř objektu compilerOptions konfiguračního souboru JSON.",
   "_0_tag_already_specified_1223": "Značka {0} se už specifikovala.",
   "_0_was_also_declared_here_6203": "{0} se deklarovalo i tady.",
   "_0_was_exported_here_1377": "{0} se exportovalo tady.",

package/lib/de/diagnosticMessages.generated.json

@@ -969,6 +969,7 @@
   "Option_incremental_can_only_be_specified_using_tsconfig_emitting_to_single_file_or_when_option_tsBui_5074": "Die Option \"--incremental\" kann nur mit \"tsconfig\" und bei Ausgabe in eine einzelne Datei oder bei Festlegung der Option \"--tsBuildInfoFile\" angegeben werden.",
   "Option_isolatedModules_can_only_be_used_when_either_option_module_is_provided_or_option_target_is_ES_5047": "Die Option \"isolatedModules\" kann nur verwendet werden, wenn entweder die Option \"--module\" angegeben ist oder die Option \"target\" den Wert \"ES2015\" oder höher aufweist.",
   "Option_preserveConstEnums_cannot_be_disabled_when_isolatedModules_is_enabled_5091": "Die Option \"preserveConstEnums\" kann nicht deaktiviert werden, wenn \"isolatedModules\" aktiviert ist.",
+  "Option_preserveValueImports_can_only_be_used_when_module_is_set_to_es2015_or_later_5095": "Die Option „preserveValueImports“ kann nur verwendet werden, wenn „module“ auf „es2015“ oder höher festgelegt ist.",
   "Option_project_cannot_be_mixed_with_source_files_on_a_command_line_5042": "Die Option \"project\" darf nicht mit Quelldateien in einer Befehlszeile kombiniert werden.",
   "Option_resolveJsonModule_can_only_be_specified_when_module_code_generation_is_commonjs_amd_es2015_or_5071": "Die Option \"--resolveJsonModule\" kann nur angegeben werden, wenn die Modulcodegenerierung \"commonjs\", \"amd\", \"es2015\" oder \"esNext\" lautet.",
   "Option_resolveJsonModule_cannot_be_specified_without_node_module_resolution_strategy_5070": "Die Option \"--resolveJsonModule\" kann nicht ohne die Modulauflösungsstrategie \"node\" angegeben werden.",
@@ -1033,6 +1034,7 @@
   "Prefix_all_incorrect_property_declarations_with_declare_95095": "Verwenden Sie für alle falschen Eigenschaftendeklarationen das Präfix \"declare\".",
   "Prefix_all_unused_declarations_with_where_possible_95025": "Alle nicht verwendeten Deklarationen nach Möglichkeit mit dem Präfix \"_\" versehen",
   "Prefix_with_declare_95094": "Präfix \"declare\" voranstellen",
+  "Preserve_unused_imported_values_in_the_JavaScript_output_that_would_otherwise_be_removed_1449": "Behalten Sie nicht verwendete importierte Werte in der JavaScript-Ausgabe bei, die andernfalls entfernt werden würden.",
   "Print_all_of_the_files_read_during_the_compilation_6653": "Drucken Sie alle Dateien, die während der Kompilierung gelesen wurden.",
   "Print_files_read_during_the_compilation_including_why_it_was_included_6631": "Während der Kompilierung gelesene Dateien drucken, einschließlich der Gründe für ihre Aufnahme.",
   "Print_names_of_files_and_the_reason_they_are_part_of_the_compilation_6505": "Hiermit werden die Namen der Dateien und der Grund dafür ausgegeben, dass die Dateien in der Kompilierung enthalten sind.",
@@ -1628,6 +1630,7 @@
   "_0_index_signatures_are_incompatible_2634": "\"{0}\" Indexsignaturen sind inkompatibel.",
   "_0_index_type_1_is_not_assignable_to_2_index_type_3_2413": "\"{0}\" Indextyp \"{1}\" kann nicht \"{2}\" Indextyp \"{3}\" zugewiesen werden.",
   "_0_is_a_primitive_but_1_is_a_wrapper_object_Prefer_using_0_when_possible_2692": "\"{0}\" ist ein primitiver Typ, aber \"{1}\" ist ein Wrapperobjekt. Verwenden Sie vorzugsweise \"{0}\", wenn möglich.",
+  "_0_is_a_type_and_must_be_imported_using_a_type_only_import_when_preserveValueImports_and_isolatedMod_1444": "„{0}“ ist ein Typ und muss mithilfe eines reinen Typimports importiert werden, wenn „preserveValueImports“ und isolatedModules“ beide aktiviert sind.",
   "_0_is_assignable_to_the_constraint_of_type_1_but_1_could_be_instantiated_with_a_different_subtype_of_5075": "\"{0}\" kann der Einschränkung vom Typ \"{1}\" zugewiesen werden, aber \"{1}\" könnte mit einem anderen Untertyp der Einschränkung \"{2}\" instanziiert werden.",
   "_0_is_declared_but_its_value_is_never_read_6133": "\"{0}\" ist deklariert, aber der zugehörige Wert wird nie gelesen.",
   "_0_is_declared_but_never_used_6196": "\"{0}\" ist deklariert, wird aber nie verwendet.",
@@ -1660,6 +1663,9 @@
   "_0_only_refers_to_a_type_but_is_being_used_as_a_value_here_Do_you_need_to_change_your_target_library_2585": "\"{0}\" bezieht sich nur auf einen Typ, wird hier jedoch als Wert verwendet. Müssen Sie Ihre Zielbibliothek ändern? Ändern Sie die Compileroption \"lib\" in \"es2015\" oder höher.",
   "_0_refers_to_a_UMD_global_but_the_current_file_is_a_module_Consider_adding_an_import_instead_2686": "\"{0}\" bezieht sich auf eine globale UMD, die aktuelle Datei ist jedoch ein Modul. Ziehen Sie in Betracht, stattdessen einen Import hinzuzufügen.",
   "_0_refers_to_a_value_but_is_being_used_as_a_type_here_Did_you_mean_typeof_0_2749": "\"{0}\" bezieht sich auf einen Wert, wird hier jedoch als Typ verwendet. Meinten Sie \"typeof {0}\"?",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_imported_using_a_type_only_import_when_preserveVa_1446": "„{0}“ wird in eine reine Typdeklaration aufgelöst und muss mithilfe eines reinen Typimports importiert werden, wenn „preserveValueImports“ und isolatedModules“ beide aktiviert sind.",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_re_exported_using_a_type_only_re_export_when_isol_1448": "„{0}“ wird in eine reine Typdeklaration aufgelöst und muss mithilfe eines reinen Typreexports erneut exportiert werden, wenn „isolatedModules“ aktiviert ist.",
+  "_0_should_be_set_inside_the_compilerOptions_object_of_the_config_json_file_6258": "\"{0}\" sollte im CompilerOptions-Objekt der JSON-Konfigurationsdatei festgelegt werden.",
   "_0_tag_already_specified_1223": "Das Tag \"{0}\" wurde bereits angegeben.",
   "_0_was_also_declared_here_6203": "\"{0}\" wurde hier ebenfalls deklariert.",
   "_0_was_exported_here_1377": "\"{0}\" wurde hier exportiert.",

package/lib/es/diagnosticMessages.generated.json

@@ -969,6 +969,7 @@
   "Option_incremental_can_only_be_specified_using_tsconfig_emitting_to_single_file_or_when_option_tsBui_5074": "La opción \"--incremental\" solo puede especificarse si se usa tsconfig, se emite en un solo archivo o se especifica la opción \"--tsBuildInfoFile\".",
   "Option_isolatedModules_can_only_be_used_when_either_option_module_is_provided_or_option_target_is_ES_5047": "La opción \"isolatedModules\" solo se puede usar cuando se proporciona la opción \"--module\" o si la opción \"target\" es \"ES2015\" o una versión posterior.",
   "Option_preserveConstEnums_cannot_be_disabled_when_isolatedModules_is_enabled_5091": "La opción \"preserveConstEnums\" no se puede deshabilitar cuando \"isolatedModules\" está habilitado.",
+  "Option_preserveValueImports_can_only_be_used_when_module_is_set_to_es2015_or_later_5095": "La opción \"preserveValueImports\" solo se puede usar cuando \"module\" esté establecido en \"es2015\" o posteriores.",
   "Option_project_cannot_be_mixed_with_source_files_on_a_command_line_5042": "La opción \"project\" no se puede combinar con archivos de origen en una línea de comandos.",
   "Option_resolveJsonModule_can_only_be_specified_when_module_code_generation_is_commonjs_amd_es2015_or_5071": "La opción \"--resolveJsonModule\" solo puede especificarse cuando la generación de código del módulo es \"commonjs\", \"amd\", \"es2015\" o \"esNext\".",
   "Option_resolveJsonModule_cannot_be_specified_without_node_module_resolution_strategy_5070": "No se puede especificar la opción \"--resolveJsonModule\" sin la estrategia de resolución de módulos \"node\".",
@@ -1033,6 +1034,7 @@
   "Prefix_all_incorrect_property_declarations_with_declare_95095": "Agregar el prefijo \"declare\" a todas las declaraciones de propiedad incorrectas",
   "Prefix_all_unused_declarations_with_where_possible_95025": "Agregar \"_\" como prefijo a todas las declaraciones sin usar, cuando sea posible",
   "Prefix_with_declare_95094": "Agregar el prefijo \"declare\"",
+  "Preserve_unused_imported_values_in_the_JavaScript_output_that_would_otherwise_be_removed_1449": "Conserva los valores importados no usados en la salida de JavaScript que, de lo contrario, se quitarían.",
   "Print_all_of_the_files_read_during_the_compilation_6653": "Imprima todos los archivos leídos durante la compilación.",
   "Print_files_read_during_the_compilation_including_why_it_was_included_6631": "Imprima los archivos leídos durante la compilación, incluyendo la razón por la que se incluyó.",
   "Print_names_of_files_and_the_reason_they_are_part_of_the_compilation_6505": "Imprima los nombres de los archivos y el motivo por el que forman parte de la compilación.",
@@ -1628,6 +1630,7 @@
   "_0_index_signatures_are_incompatible_2634": "Las signaturas de índice \"{0}\" no son compatibles.",
   "_0_index_type_1_is_not_assignable_to_2_index_type_3_2413": "El tipo de índice \"{0}\"' \"{1}\" no se puede asignar al tipo de índice \"{2}\" \"{3}\".",
   "_0_is_a_primitive_but_1_is_a_wrapper_object_Prefer_using_0_when_possible_2692": "'{0}' es un elemento primitivo, pero '{1}' es un objeto contenedor. Use '{0}' preferentemente cuando sea posible.",
+  "_0_is_a_type_and_must_be_imported_using_a_type_only_import_when_preserveValueImports_and_isolatedMod_1444": "\"{0}\" es un tipo y debe importarse mediante una importación de solo tipo cuando \"preserveValueImports\" y \"isolatedModules\" estén habilitados.",
   "_0_is_assignable_to_the_constraint_of_type_1_but_1_could_be_instantiated_with_a_different_subtype_of_5075": "\"{0}\" puede asignarse a la restricción de tipo \"{1}\", pero no se pudo crear una instancia de \"{1}\" con un subtipo distinto de la restricción \"{2}\".",
   "_0_is_declared_but_its_value_is_never_read_6133": "Se declara \"{0}\", pero su valor no se lee nunca.",
   "_0_is_declared_but_never_used_6196": "\"{0}\" se declara pero nunca se utiliza.",
@@ -1660,6 +1663,9 @@
   "_0_only_refers_to_a_type_but_is_being_used_as_a_value_here_Do_you_need_to_change_your_target_library_2585": "\"{0}\" solo hace referencia a un tipo, pero aquí se usa como valor. ¿Necesita cambiar la biblioteca de destino? Pruebe a cambiar la opción del compilador \"lib\" a es2015 o posterior.",
   "_0_refers_to_a_UMD_global_but_the_current_file_is_a_module_Consider_adding_an_import_instead_2686": "'{0}' hace referencia a un elemento UMD global, pero el archivo actual es un módulo. Puede agregar una importación en su lugar.",
   "_0_refers_to_a_value_but_is_being_used_as_a_type_here_Did_you_mean_typeof_0_2749": "\"{0}\" hace referencia a un valor, pero aquí se usa como tipo. ¿Quiso decir \"typeof {0}\"?",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_imported_using_a_type_only_import_when_preserveVa_1446": "\"{0}\" se resuelve como una declaración de solo tipo y debe importarse mediante una importación de solo tipo cuando \"preserveValueImports\" y \"isolatedModules\" estén habilitados.",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_re_exported_using_a_type_only_re_export_when_isol_1448": "\"{0}\" se resuelve como una declaración de solo tipo y debe volverse a exportar con un tipo de reexportación solo cuando esté habilitada la opción \"isolatedModules\".",
+  "_0_should_be_set_inside_the_compilerOptions_object_of_the_config_json_file_6258": "\"{0}\" debe establecerse dentro del objeto \"compilerOptions\" del archivo .json de configuración",
   "_0_tag_already_specified_1223": "La etiqueta '{0}' ya se ha especificado.",
   "_0_was_also_declared_here_6203": "\"{0}\" también se ha declarado aquí.",
   "_0_was_exported_here_1377": "\"{0}\" se ha exportado aquí.",

package/lib/fr/diagnosticMessages.generated.json

@@ -969,6 +969,7 @@
   "Option_incremental_can_only_be_specified_using_tsconfig_emitting_to_single_file_or_when_option_tsBui_5074": "L'option '--incremental' peut uniquement être spécifiée à l'aide de tsconfig, en cas d'émission vers un seul fichier ou quand l'option '--tsBuildInfoFile' est spécifiée.",
   "Option_isolatedModules_can_only_be_used_when_either_option_module_is_provided_or_option_target_is_ES_5047": "L'option 'isolatedModules' peut être utilisée seulement quand l'option '--module' est spécifiée, ou quand l'option 'target' a la valeur 'ES2015' ou une version supérieure.",
   "Option_preserveConstEnums_cannot_be_disabled_when_isolatedModules_is_enabled_5091": "L'option 'preserveConstEnums' ne peut pas être désactivée quand 'isolatedModules' est activé.",
+  "Option_preserveValueImports_can_only_be_used_when_module_is_set_to_es2015_or_later_5095": "L’option « preserveValueImports » peut uniquement être utilisée quand « module » a la valeur « es2015 » ou une version ultérieure.",
   "Option_project_cannot_be_mixed_with_source_files_on_a_command_line_5042": "Impossible d'associer l'option 'project' à des fichiers sources sur une ligne de commande.",
   "Option_resolveJsonModule_can_only_be_specified_when_module_code_generation_is_commonjs_amd_es2015_or_5071": "L'option '--resolveJsonModule' peut uniquement être spécifiée quand la génération du code de module est 'commonjs', 'amd', 'es2015' ou 'esNext'.",
   "Option_resolveJsonModule_cannot_be_specified_without_node_module_resolution_strategy_5070": "Impossible de spécifier l'option '--resolveJsonModule' sans la stratégie de résolution de module 'node'.",
@@ -1033,6 +1034,7 @@
   "Prefix_all_incorrect_property_declarations_with_declare_95095": "Faire commencer toutes les déclarations de propriété incorrectes par 'declare'",
   "Prefix_all_unused_declarations_with_where_possible_95025": "Préfixer toutes les déclarations inutilisées avec '_' si possible",
   "Prefix_with_declare_95094": "Faire commencer par 'declare'",
+  "Preserve_unused_imported_values_in_the_JavaScript_output_that_would_otherwise_be_removed_1449": "Conservez les valeurs importées inutilisées dans la sortie JavaScript qui seraient normalement supprimées.",
   "Print_all_of_the_files_read_during_the_compilation_6653": "Imprimez tous les fichiers lus pendant la compilation.",
   "Print_files_read_during_the_compilation_including_why_it_was_included_6631": "Fichiers d’impression lus pendant la compilation, notamment la raison de l’inclusion.",
   "Print_names_of_files_and_the_reason_they_are_part_of_the_compilation_6505": "Affiche les noms des fichiers et la raison pour laquelle ils font partie de la compilation.",
@@ -1628,6 +1630,7 @@
   "_0_index_signatures_are_incompatible_2634": "Les signatures d'index « {0} » sont incompatibles.",
   "_0_index_type_1_is_not_assignable_to_2_index_type_3_2413": "Le type d’index « {0} », « {1} », ne peut pas être attribué au type d’index « {2} », « {3} ».",
   "_0_is_a_primitive_but_1_is_a_wrapper_object_Prefer_using_0_when_possible_2692": "'{0}' est une primitive, mais '{1}' est un objet wrapper. Si possible, utilisez '{0}' de préférence.",
+  "_0_is_a_type_and_must_be_imported_using_a_type_only_import_when_preserveValueImports_and_isolatedMod_1444": "« {0} » est un type seul et doit être importé à l'aide d'une importation de type seul lorsque « preserveValueImports » et « isolatedModules » sont tous deux activés.",
   "_0_is_assignable_to_the_constraint_of_type_1_but_1_could_be_instantiated_with_a_different_subtype_of_5075": "'{0}' peut être assigné à la contrainte de type '{1}', mais '{1}' a pu être instancié avec un autre sous-type de contrainte '{2}'.",
   "_0_is_declared_but_its_value_is_never_read_6133": "'{0}' est déclaré mais sa valeur n'est jamais lue.",
   "_0_is_declared_but_never_used_6196": "'{0}' est déclaré mais n'est jamais utilisé.",
@@ -1660,6 +1663,9 @@
   "_0_only_refers_to_a_type_but_is_being_used_as_a_value_here_Do_you_need_to_change_your_target_library_2585": "'{0}' fait uniquement référence à un type, mais il est utilisé ici en tant que valeur. Devez-vous changer votre bibliothèque cible ? Essayez de remplacer l'option de compilateur 'lib' par es2015 ou une version ultérieure.",
   "_0_refers_to_a_UMD_global_but_the_current_file_is_a_module_Consider_adding_an_import_instead_2686": "'{0}' fait référence à une variable globale UMD, mais le fichier actuel est un module. Ajoutez une importation à la place.",
   "_0_refers_to_a_value_but_is_being_used_as_a_type_here_Did_you_mean_typeof_0_2749": "'{0}' fait référence à une valeur, mais il est utilisé ici en tant que type. Est-ce que vous avez voulu utiliser 'typeof {0}' ?",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_imported_using_a_type_only_import_when_preserveVa_1446": "« {0} » se résout en une déclaration de type seul et doit être importé à l'aide d'une importation de type seul lorsque « preserveValueImports » et « isolatedModules » sont tous deux activés.",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_re_exported_using_a_type_only_re_export_when_isol_1448": "« {0} » se résout une déclaration de type unique et doit être réexporté à l'aide d'une réexportation de type unique lorsque l'option « isolatedModules » est activée.",
+  "_0_should_be_set_inside_the_compilerOptions_object_of_the_config_json_file_6258": "'{0}' doit être défini dans l'objet 'compilerOptions' du fichier de configuration json",
   "_0_tag_already_specified_1223": "La balise '{0}' est déjà spécifiée.",
   "_0_was_also_declared_here_6203": "'{0}' a également été déclaré ici.",
   "_0_was_exported_here_1377": "'{0}' a été exporté ici.",

package/lib/it/diagnosticMessages.generated.json

@@ -969,6 +969,7 @@
   "Option_incremental_can_only_be_specified_using_tsconfig_emitting_to_single_file_or_when_option_tsBui_5074": "È possibile specificare l'opzione '--incremental' solo se si usa tsconfig, si crea un singolo file o si specifica l'opzione '--tsBuildInfoFile'.",
   "Option_isolatedModules_can_only_be_used_when_either_option_module_is_provided_or_option_target_is_ES_5047": "L'opzione 'isolatedModules' può essere usata solo quando si specifica l'opzione '--module' oppure il valore dell'opzione 'target' è 'ES2015' o maggiore.",
   "Option_preserveConstEnums_cannot_be_disabled_when_isolatedModules_is_enabled_5091": "Non è possibile disabilitare l'opzione 'preserveConstEnums' quando l'opzione 'isolatedModules' è abilitata.",
+  "Option_preserveValueImports_can_only_be_used_when_module_is_set_to_es2015_or_later_5095": "L'opzione 'preserveValueImports' può essere usata solo quando 'module' è impostato su 'es2015' o versione successiva.",
   "Option_project_cannot_be_mixed_with_source_files_on_a_command_line_5042": "Non è possibile combinare l'opzione 'project' con file di origine in una riga di comando.",
   "Option_resolveJsonModule_can_only_be_specified_when_module_code_generation_is_commonjs_amd_es2015_or_5071": "È possibile specificare l'opzione '--resolveJsonModule' solo quando la generazione del codice del modulo è impostata su 'commonjs', 'amd', 'es2015' o 'esNext'.",
   "Option_resolveJsonModule_cannot_be_specified_without_node_module_resolution_strategy_5070": "Non è possibile specificare l'opzione '--resolveJsonModule' senza la strategia di risoluzione del modulo 'node'.",
@@ -1033,6 +1034,7 @@
   "Prefix_all_incorrect_property_declarations_with_declare_95095": "Aggiungere 'declare' come prefisso a tutte le dichiarazioni di proprietà non corrette",
   "Prefix_all_unused_declarations_with_where_possible_95025": "Aggiungere a tutte le dichiarazioni non usate il prefisso '_', laddove possibile",
   "Prefix_with_declare_95094": "Aggiungere il prefisso 'declare'",
+  "Preserve_unused_imported_values_in_the_JavaScript_output_that_would_otherwise_be_removed_1449": "Conserva i valori importati non usati nell'output JavaScript che altrimenti verrebbe rimosso.",
   "Print_all_of_the_files_read_during_the_compilation_6653": "Stampa tutti i file letti durante la compilazione.",
   "Print_files_read_during_the_compilation_including_why_it_was_included_6631": "Stampa i file letti durante la compilazione e indica il motivo per cui sono stati inclusi.",
   "Print_names_of_files_and_the_reason_they_are_part_of_the_compilation_6505": "Stampa i nomi dei file e il motivo per cui fanno parte della compilazione.",
@@ -1628,6 +1630,7 @@
   "_0_index_signatures_are_incompatible_2634": "Le firme dell'indice '{0}' non sono compatibili.",
   "_0_index_type_1_is_not_assignable_to_2_index_type_3_2413": "Il tipo di indice '{0}' '{1}' non è assegnabile al tipo di indice '{2}' '{3}'.",
   "_0_is_a_primitive_but_1_is_a_wrapper_object_Prefer_using_0_when_possible_2692": "'{0}' è una primitiva, ma '{1}' è un oggetto wrapper. Quando possibile, preferire '{0}'.",
+  "_0_is_a_type_and_must_be_imported_using_a_type_only_import_when_preserveValueImports_and_isolatedMod_1444": "'{0}' è un tipo e deve essere importato usando un'importazione solo di tipi quando 'preserveValueImports' e 'isolatedModules' sono entrambi abilitati.",
   "_0_is_assignable_to_the_constraint_of_type_1_but_1_could_be_instantiated_with_a_different_subtype_of_5075": "'{0}' è assegnabile al vincolo di tipo '{1}', ma è possibile creare un'istanza di '{1}' con un sottotipo diverso del vincolo '{2}'.",
   "_0_is_declared_but_its_value_is_never_read_6133": "L'elemento '{0}' è dichiarato, ma il suo valore non viene mai letto.",
   "_0_is_declared_but_never_used_6196": "La variabile '{0}' è dichiarata, ma non viene mai usata.",
@@ -1660,6 +1663,9 @@
   "_0_only_refers_to_a_type_but_is_being_used_as_a_value_here_Do_you_need_to_change_your_target_library_2585": "'{0}' si riferisce solo a un tipo, ma in questo punto viene usato come valore. È necessario modificare la libreria di destinazione? Provare a impostare l'opzione 'lib' del compilatore su es2015 o versioni successive.",
   "_0_refers_to_a_UMD_global_but_the_current_file_is_a_module_Consider_adding_an_import_instead_2686": "'{0}' fa riferimento a un istruzione globale UMD, ma il file corrente è un modulo. Provare ad aggiungere un'importazione.",
   "_0_refers_to_a_value_but_is_being_used_as_a_type_here_Did_you_mean_typeof_0_2749": "'{0}' fa riferimento a un valore, ma qui viene usato come tipo. Si intendeva 'typeof {0}'?",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_imported_using_a_type_only_import_when_preserveVa_1446": "'{0}' si risolve in una dichiarazione solo di tipi e deve essere importato usando un'importazione solo di tipi quando 'preserveValueImports' e 'isolatedModules' sono entrambi abilitati.",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_re_exported_using_a_type_only_re_export_when_isol_1448": "'{0}' si risolve in una dichiarazione solo di tipi e deve essere riesportato usando una riesportazione solo di tipi quando 'isolatedModules' è abilitato.",
+  "_0_should_be_set_inside_the_compilerOptions_object_of_the_config_json_file_6258": "' {0}' deve essere impostato all'interno dell'oggetto 'compilerOptions' del file JSON di configurazione",
   "_0_tag_already_specified_1223": "Il tag '{0}' è già specificato.",
   "_0_was_also_declared_here_6203": "In questo punto viene dichiarato anche '{0}'.",
   "_0_was_exported_here_1377": "In questo punto è stato esportato '{0}'.",

package/lib/ja/diagnosticMessages.generated.json

@@ -969,6 +969,7 @@
   "Option_incremental_can_only_be_specified_using_tsconfig_emitting_to_single_file_or_when_option_tsBui_5074": "オプション '--incremental' は、tsconfig を使用して指定して単一ファイルに出力するか、オプション '--tsBuildInfoFile' が指定された場合にのみ指定することができます。",
   "Option_isolatedModules_can_only_be_used_when_either_option_module_is_provided_or_option_target_is_ES_5047": "オプション 'isolatedModules' は、オプション '--module' が指定されているか、オプション 'target' が 'ES2015' 以上であるかのいずれかの場合でのみ使用できます。",
   "Option_preserveConstEnums_cannot_be_disabled_when_isolatedModules_is_enabled_5091": "'isolatedModules' が有効になっているときは、オプション 'preserveConstEnums' を無効にできません。",
+  "Option_preserveValueImports_can_only_be_used_when_module_is_set_to_es2015_or_later_5095": "オプションの \"preserveValueImports\" は \"module\" が \"es2015\" か、またはそれ以降に設定されている時のみ、使用することができます。",
   "Option_project_cannot_be_mixed_with_source_files_on_a_command_line_5042": "オプション 'project' をコマンド ライン上でソース ファイルと一緒に指定することはできません。",
   "Option_resolveJsonModule_can_only_be_specified_when_module_code_generation_is_commonjs_amd_es2015_or_5071": "オプション '--resolveJsonModule' は、モジュール コードの生成が 'commonjs'、'amd'、'es2015'、'esNext' である場合にのみ指定できます。",
   "Option_resolveJsonModule_cannot_be_specified_without_node_module_resolution_strategy_5070": "'node' モジュールの解決方法を使用せずにオプション '--resolveJsonModule' を指定することはできません。",
@@ -1033,6 +1034,7 @@
   "Prefix_all_incorrect_property_declarations_with_declare_95095": "すべての正しくないプロパティ宣言の前に 'declare' を付ける",
   "Prefix_all_unused_declarations_with_where_possible_95025": "可能な場合は、使用されていないすべての宣言にプレフィックスとして '_' を付けます",
   "Prefix_with_declare_95094": "'declare' を前に付ける",
+  "Preserve_unused_imported_values_in_the_JavaScript_output_that_would_otherwise_be_removed_1449": "さもなければ削除されてしまう JavaScript のアウトプット中の使われていないインポートされた値を保持します。",
   "Print_all_of_the_files_read_during_the_compilation_6653": "コンパイル時に読み取られたすべてのファイルを出力します。",
   "Print_files_read_during_the_compilation_including_why_it_was_included_6631": "コンパイル時に読み取られたファイルを、それが含まれる理由と共に出力します。",
   "Print_names_of_files_and_the_reason_they_are_part_of_the_compilation_6505": "ファイルの名前と、それらがコンパイルに含まれている理由を書き出します。",
@@ -1628,6 +1630,7 @@
   "_0_index_signatures_are_incompatible_2634": "'{0}' インデックス シグネチャに互換性がありません。",
   "_0_index_type_1_is_not_assignable_to_2_index_type_3_2413": "'{0}'インデックス型'{1}' を '{2}'インデックス型'{3}' に割り当てることはできません。",
   "_0_is_a_primitive_but_1_is_a_wrapper_object_Prefer_using_0_when_possible_2692": "'{0}' はプリミティブですが、'{1}' はラッパー オブジェクトです。できれば '{0}' をご使用ください。",
+  "_0_is_a_type_and_must_be_imported_using_a_type_only_import_when_preserveValueImports_and_isolatedMod_1444": "\"{0}\" は型であり、\"preserveValueImports\" と \"isolatedModules\" の両方が有効な場合、型に限定したインポートを使用してインポートされる必要があります。",
   "_0_is_assignable_to_the_constraint_of_type_1_but_1_could_be_instantiated_with_a_different_subtype_of_5075": "'{0}' は型 '{1}' の制約に代入できますが、'{1}' は制約 '{2}' の別のサブタイプでインスタンス化できることがあります。",
   "_0_is_declared_but_its_value_is_never_read_6133": "'{0}' が宣言されていますが、その値が読み取られることはありません。",
   "_0_is_declared_but_never_used_6196": "'{0}' は宣言されましたが使用されませんでした。",
@@ -1660,6 +1663,9 @@
   "_0_only_refers_to_a_type_but_is_being_used_as_a_value_here_Do_you_need_to_change_your_target_library_2585": "'{0}' は型のみを参照しますが、ここでは値として使用されています。ターゲット ライブラリを変更しますか? 'lib' コンパイラ オプションを es2015 以降に変更してみてください。",
   "_0_refers_to_a_UMD_global_but_the_current_file_is_a_module_Consider_adding_an_import_instead_2686": "'{0}' は UMD グローバルを参照していますが、現在のファイルはモジュールです。代わりにインポートを追加することを考慮してください。",
   "_0_refers_to_a_value_but_is_being_used_as_a_type_here_Did_you_mean_typeof_0_2749": "'{0}' は値を参照していますが、ここでは型として使用されています。'typeof {0}' を意図していましたか?",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_imported_using_a_type_only_import_when_preserveVa_1446": "\"{0}\" は型に限定した宣言を解決するため、\"preserveValueImports\" と \"isolatedModules\" の両方が有効な場合、型に限定したインポートを使用してインポートする必要があります。",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_re_exported_using_a_type_only_re_export_when_isol_1448": "\"{0}\" は型に限定した宣言を解決するため、\" isolatedModules\" が有効になっているときは、型に限定した再エクスポートを使用して再エクスポートされる必要があります。",
+  "_0_should_be_set_inside_the_compilerOptions_object_of_the_config_json_file_6258": "config json ファイル の 'compilerOptions' オブジェクト内に '{0}' を設定する必要があります。",
   "_0_tag_already_specified_1223": "'{0}' タグは既に指定されています。",
   "_0_was_also_declared_here_6203": "ここでは '{0}' も宣言されました。",
   "_0_was_exported_here_1377": "ここでは '{0} ' がエクスポートされました。",

package/lib/ko/diagnosticMessages.generated.json

@@ -969,6 +969,7 @@
   "Option_incremental_can_only_be_specified_using_tsconfig_emitting_to_single_file_or_when_option_tsBui_5074": "'--incremental' 옵션은 tsconfig를 사용하거나 단일 파일로 내보내서 지정하거나 '--tsBuildInfoFile' 옵션을 지정할 때만 지정할 수 있습니다.",
   "Option_isolatedModules_can_only_be_used_when_either_option_module_is_provided_or_option_target_is_ES_5047": "'isolatedModules' 옵션은 '--module' 옵션을 지정하거나 'target' 옵션이 'ES2015' 이상인 경우에만 사용할 수 있습니다.",
   "Option_preserveConstEnums_cannot_be_disabled_when_isolatedModules_is_enabled_5091": "'isolatedModules'가 사용하도록 설정된 경우 'preserveConstEnums' 옵션을 사용하지 않도록 설정할 수 없습니다.",
+  "Option_preserveValueImports_can_only_be_used_when_module_is_set_to_es2015_or_later_5095": "'preserveValueImports' 옵션은 'module'이 'es2015' 이상으로 설정된 경우에만 사용할 수 있습니다.",
   "Option_project_cannot_be_mixed_with_source_files_on_a_command_line_5042": "명령줄에서 'project' 옵션을 원본 파일과 혼합하여 사용할 수 없습니다.",
   "Option_resolveJsonModule_can_only_be_specified_when_module_code_generation_is_commonjs_amd_es2015_or_5071": "'--resolveJsonModule' 옵션은 모듈 코드 생성이 'commonjs', 'amd', 'es2015' 또는 'esNext'일 경우에만 지정할 수 있습니다.",
   "Option_resolveJsonModule_cannot_be_specified_without_node_module_resolution_strategy_5070": "'node' 모듈 확인 전략 없이 '--resolveJsonModule' 옵션을 지정할 수 없습니다.",
@@ -1033,6 +1034,7 @@
   "Prefix_all_incorrect_property_declarations_with_declare_95095": "모든 잘못된 속성 선언에 'declare'를 접두사로 추가",
   "Prefix_all_unused_declarations_with_where_possible_95025": "가능한 경우 사용하지 않는 모든 선언에 '_'을 접두사로 추가",
   "Prefix_with_declare_95094": "'declare'를 접두사로 추가",
+  "Preserve_unused_imported_values_in_the_JavaScript_output_that_would_otherwise_be_removed_1449": "JavaScript 출력에서 사용되지 않는 가져온 값을 유지합니다. 그렇지 않으면 제거됩니다.",
   "Print_all_of_the_files_read_during_the_compilation_6653": "컴파일 중에 읽은 모든 파일을 출력합니다.",
   "Print_files_read_during_the_compilation_including_why_it_was_included_6631": "컴파일 중에 읽은 파일을 포함 이유와 함께 출력합니다.",
   "Print_names_of_files_and_the_reason_they_are_part_of_the_compilation_6505": "파일의 이름과 해당 파일이 컴파일에 포함된 이유를 출력합니다.",
@@ -1628,6 +1630,7 @@
   "_0_index_signatures_are_incompatible_2634": "'{0}' 인덱스 시그니처가 호환되지 않습니다.",
   "_0_index_type_1_is_not_assignable_to_2_index_type_3_2413": "'{0}' 인덱스 유형 '{1}'을(를) '{2}' 인텍스 유형 '{3}'에 할당할 수 없습니다.",
   "_0_is_a_primitive_but_1_is_a_wrapper_object_Prefer_using_0_when_possible_2692": "{0}'은(는) 기본 개체이지만 '{1}'은(는) 래퍼 개체입니다. 가능한 경우 '{0}'을(를) 사용하세요.",
+  "_0_is_a_type_and_must_be_imported_using_a_type_only_import_when_preserveValueImports_and_isolatedMod_1444": "'{0}'은(는) 형식이며, 'preserveValueImports'와 'isolatedModules'를 모두 사용하도록 설정한 경우 형식 전용 가져오기를 사용하여 가져와야 합니다.",
   "_0_is_assignable_to_the_constraint_of_type_1_but_1_could_be_instantiated_with_a_different_subtype_of_5075": "'{0}'은(는) '{1}' 형식의 제약 조건에 할당할 수 있지만, '{1}'은(는) '{2}' 제약 조건의 다른 하위 형식으로 인스턴스화할 수 있습니다.",
   "_0_is_declared_but_its_value_is_never_read_6133": "'{0}'이(가) 선언은 되었지만 해당 값이 읽히지는 않았습니다.",
   "_0_is_declared_but_never_used_6196": "'{0}'이(가) 선언되었지만 사용되지 않았습니다.",
@@ -1660,6 +1663,9 @@
   "_0_only_refers_to_a_type_but_is_being_used_as_a_value_here_Do_you_need_to_change_your_target_library_2585": "'{0}'은(는) 형식만 참조하지만, 여기서는 값으로 사용되고 있습니다. 대상 라이브러리를 변경하려는 경우 'lib' 컴파일러 옵션을 es2015 이상으로 변경해 보세요.",
   "_0_refers_to_a_UMD_global_but_the_current_file_is_a_module_Consider_adding_an_import_instead_2686": "'{0}'은(는) UMD 전역을 참조하지만 현재 파일은 모듈입니다. 대신 가져오기를 추가해 보세요.",
   "_0_refers_to_a_value_but_is_being_used_as_a_type_here_Did_you_mean_typeof_0_2749": "'{0}'은(는) 값을 참조하지만, 여기서는 형식으로 사용되고 있습니다. 'typeof {0}'을(를) 사용하시겠습니까?",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_imported_using_a_type_only_import_when_preserveVa_1446": "'{0}'은(는) 형식 전용 선언으로 확인되며, 'preserveValueImports'와 'isolatedModules'를 모두 사용하도록 설정한 경우 형식 전용 가져오기를 사용하여 가져와야 합니다.",
+  "_0_resolves_to_a_type_only_declaration_and_must_be_re_exported_using_a_type_only_re_export_when_isol_1448": "'{0}'은(는) 형식 전용 선언으로 확인되며, 'isolatedModules'를 사용하도록 설정한 경우 형식 전용 다시 내보내기를 사용하여 다시 내보내야 합니다.",
+  "_0_should_be_set_inside_the_compilerOptions_object_of_the_config_json_file_6258": "'{0}'은(는) 구성 json 파일의 'compilerOptions' 개체 내에 설정해야 합니다.",
   "_0_tag_already_specified_1223": "'{0}' 태그가 이미 지정되었습니다.",
   "_0_was_also_declared_here_6203": "여기서도 '{0}'이(가) 선언되었습니다.",
   "_0_was_exported_here_1377": "여기서는 '{0}'을(를) 내보냈습니다.",

package/lib/lib.es2015.iterable.d.ts

@@ -223,7 +223,7 @@ interface PromiseConstructor {
      * @param values An iterable of Promises.
      * @returns A new Promise.
      */
-    all<T>(values: Iterable<T | PromiseLike<T>>): Promise<T[]>;
+    all<T>(values: Iterable<T | PromiseLike<T>>): Promise<Awaited<T>[]>;
 
     /**
      * Creates a Promise that is resolved or rejected when any of the provided Promises are resolved
@@ -231,15 +231,7 @@ interface PromiseConstructor {
      * @param values An iterable of Promises.
      * @returns A new Promise.
      */
-    race<T>(values: Iterable<T>): Promise<T extends PromiseLike<infer U> ? U : T>;
-
-    /**
-     * Creates a Promise that is resolved or rejected when any of the provided Promises are resolved
-     * or rejected.
-     * @param values An iterable of Promises.
-     * @returns A new Promise.
-     */
-    race<T>(values: Iterable<T | PromiseLike<T>>): Promise<T>;
+    race<T>(values: Iterable<T | PromiseLike<T>>): Promise<Awaited<T>>;
 }
 
 interface String {

package/lib/lib.es2015.promise.d.ts

@@ -38,79 +38,7 @@ interface PromiseConstructor {
      * @param values An array of Promises.
      * @returns A new Promise.
      */
-    all<T1, T2, T3, T4, T5, T6, T7, T8, T9, T10>(values: readonly [T1 | PromiseLike<T1>, T2 | PromiseLike<T2>, T3 | PromiseLike<T3>, T4 | PromiseLike<T4>, T5 | PromiseLike<T5>, T6 | PromiseLike<T6>, T7 | PromiseLike<T7>, T8 | PromiseLike<T8>, T9 | PromiseLike<T9>, T10 | PromiseLike<T10>]): Promise<[T1, T2, T3, T4, T5, T6, T7, T8, T9, T10]>;
-
-    /**
-     * Creates a Promise that is resolved with an array of results when all of the provided Promises
-     * resolve, or rejected when any Promise is rejected.
-     * @param values An array of Promises.
-     * @returns A new Promise.
-     */
-    all<T1, T2, T3, T4, T5, T6, T7, T8, T9>(values: readonly [T1 | PromiseLike<T1>, T2 | PromiseLike<T2>, T3 | PromiseLike<T3>, T4 | PromiseLike<T4>, T5 | PromiseLike<T5>, T6 | PromiseLike<T6>, T7 | PromiseLike<T7>, T8 | PromiseLike<T8>, T9 | PromiseLike<T9>]): Promise<[T1, T2, T3, T4, T5, T6, T7, T8, T9]>;
-
-    /**
-     * Creates a Promise that is resolved with an array of results when all of the provided Promises
-     * resolve, or rejected when any Promise is rejected.
-     * @param values An array of Promises.
-     * @returns A new Promise.
-     */
-    all<T1, T2, T3, T4, T5, T6, T7, T8>(values: readonly [T1 | PromiseLike<T1>, T2 | PromiseLike<T2>, T3 | PromiseLike<T3>, T4 | PromiseLike<T4>, T5 | PromiseLike<T5>, T6 | PromiseLike<T6>, T7 | PromiseLike<T7>, T8 | PromiseLike<T8>]): Promise<[T1, T2, T3, T4, T5, T6, T7, T8]>;
-
-    /**
-     * Creates a Promise that is resolved with an array of results when all of the provided Promises
-     * resolve, or rejected when any Promise is rejected.
-     * @param values An array of Promises.
-     * @returns A new Promise.
-     */
-    all<T1, T2, T3, T4, T5, T6, T7>(values: readonly [T1 | PromiseLike<T1>, T2 | PromiseLike<T2>, T3 | PromiseLike<T3>, T4 | PromiseLike<T4>, T5 | PromiseLike<T5>, T6 | PromiseLike<T6>, T7 | PromiseLike<T7>]): Promise<[T1, T2, T3, T4, T5, T6, T7]>;
-
-    /**
-     * Creates a Promise that is resolved with an array of results when all of the provided Promises
-     * resolve, or rejected when any Promise is rejected.
-     * @param values An array of Promises.
-     * @returns A new Promise.
-     */
-    all<T1, T2, T3, T4, T5, T6>(values: readonly [T1 | PromiseLike<T1>, T2 | PromiseLike<T2>, T3 | PromiseLike<T3>, T4 | PromiseLike<T4>, T5 | PromiseLike<T5>, T6 | PromiseLike<T6>]): Promise<[T1, T2, T3, T4, T5, T6]>;
-
-    /**
-     * Creates a Promise that is resolved with an array of results when all of the provided Promises
-     * resolve, or rejected when any Promise is rejected.
-     * @param values An array of Promises.
-     * @returns A new Promise.
-     */
-    all<T1, T2, T3, T4, T5>(values: readonly [T1 | PromiseLike<T1>, T2 | PromiseLike<T2>, T3 | PromiseLike<T3>, T4 | PromiseLike<T4>, T5 | PromiseLike<T5>]): Promise<[T1, T2, T3, T4, T5]>;
-
-    /**
-     * Creates a Promise that is resolved with an array of results when all of the provided Promises
-     * resolve, or rejected when any Promise is rejected.
-     * @param values An array of Promises.
-     * @returns A new Promise.
-     */
-    all<T1, T2, T3, T4>(values: readonly [T1 | PromiseLike<T1>, T2 | PromiseLike<T2>, T3 | PromiseLike<T3>, T4 | PromiseLike<T4>]): Promise<[T1, T2, T3, T4]>;
-
-    /**
-     * Creates a Promise that is resolved with an array of results when all of the provided Promises
-     * resolve, or rejected when any Promise is rejected.
-     * @param values An array of Promises.
-     * @returns A new Promise.
-     */
-    all<T1, T2, T3>(values: readonly [T1 | PromiseLike<T1>, T2 | PromiseLike<T2>, T3 | PromiseLike<T3>]): Promise<[T1, T2, T3]>;
-
-    /**
-     * Creates a Promise that is resolved with an array of results when all of the provided Promises
-     * resolve, or rejected when any Promise is rejected.
-     * @param values An array of Promises.
-     * @returns A new Promise.
-     */
-    all<T1, T2>(values: readonly [T1 | PromiseLike<T1>, T2 | PromiseLike<T2>]): Promise<[T1, T2]>;
-
-    /**
-     * Creates a Promise that is resolved with an array of results when all of the provided Promises
-     * resolve, or rejected when any Promise is rejected.
-     * @param values An array of Promises.
-     * @returns A new Promise.
-     */
-    all<T>(values: readonly (T | PromiseLike<T>)[]): Promise<T[]>;
+    all<T extends readonly unknown[] | []>(values: T): Promise<{ -readonly [P in keyof T]: Awaited<T[P]> }>;
 
     // see: lib.es2015.iterable.d.ts
     // all<T>(values: Iterable<T | PromiseLike<T>>): Promise<T[]>;
@@ -121,7 +49,7 @@ interface PromiseConstructor {
      * @param values An array of Promises.
      * @returns A new Promise.
      */
-    race<T>(values: readonly T[]): Promise<T extends PromiseLike<infer U> ? U : T>;
+    race<T extends readonly unknown[] | []>(values: T): Promise<Awaited<T[number]>>;
 
     // see: lib.es2015.iterable.d.ts
     // race<T>(values: Iterable<T>): Promise<T extends PromiseLike<infer U> ? U : T>;

package/lib/lib.es2018.intl.d.ts

@@ -25,13 +25,13 @@ declare namespace Intl {
     type PluralRuleType = "cardinal" | "ordinal";
 
     interface PluralRulesOptions {
-        localeMatcher?: "lookup" | "best fit";
-        type?: PluralRuleType;
-        minimumIntegerDigits?: number;
-        minimumFractionDigits?: number;
-        maximumFractionDigits?: number;
-        minimumSignificantDigits?: number;
-        maximumSignificantDigits?: number;
+        localeMatcher?: "lookup" | "best fit" | undefined;
+        type?: PluralRuleType | undefined;
+        minimumIntegerDigits?: number | undefined;
+        minimumFractionDigits?: number | undefined;
+        maximumFractionDigits?: number | undefined;
+        minimumSignificantDigits?: number | undefined;
+        maximumSignificantDigits?: number | undefined;
     }
 
     interface ResolvedPluralRulesOptions {
@@ -53,9 +53,21 @@ declare namespace Intl {
     const PluralRules: {
         new (locales?: string | string[], options?: PluralRulesOptions): PluralRules;
         (locales?: string | string[], options?: PluralRulesOptions): PluralRules;
-        supportedLocalesOf(
-            locales: string | string[],
-            options?: PluralRulesOptions,
-        ): string[];
+
+        supportedLocalesOf(locales: string | string[], options?: { localeMatcher?: "lookup" | "best fit" }): string[];
     };
+
+    // We can only have one definition for 'type' in TypeScript, and so you can learn where the keys come from here:
+    type ES2018NumberFormatPartType = "literal" | "nan" | "infinity" | "percent" | "integer" | "group" | "decimal" | "fraction" | "plusSign" | "minusSign" | "percentSign" | "currency" | "code" | "symbol" | "name";
+    type ES2020NumberFormatPartType = "compact" | "exponentInteger" | "exponentMinusSign" | "exponentSeparator" | "unit" | "unknown";
+    type NumberFormatPartType = ES2018NumberFormatPartType | ES2020NumberFormatPartType;
+
+    interface NumberFormatPart {
+        type: NumberFormatPartType;
+        value: string;
+    }
+
+    interface NumberFormat {
+        formatToParts(number?: number | bigint): NumberFormatPart[];
+    }
 }

package/lib/lib.es2020.intl.d.ts

@@ -24,7 +24,6 @@ declare namespace Intl {
      * [Unicode BCP 47 Locale Identifiers](https://unicode.org/reports/tr35/#Unicode_Language_and_Locale_Identifiers) definition.
      *
      * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl#locales_argument).
-     *
      */
     type UnicodeBCP47LocaleIdentifier = string;
 
@@ -32,26 +31,29 @@ declare namespace Intl {
      * Unit to use in the relative time internationalized message.
      *
      * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/format#Parameters).
-     *
-     * [Specification](https://tc39.es/ecma402/#sec-singularrelativetimeunit).
      */
     type RelativeTimeFormatUnit =
-        | "year" | "years"
-        | "quarter" | "quarters"
-        | "month" | "months"
-        | "week" | "weeks"
-        | "day" | "days"
-        | "hour" | "hours"
-        | "minute" | "minutes"
-        | "second" | "seconds"
-        ;
+        | "year"
+        | "years"
+        | "quarter"
+        | "quarters"
+        | "month"
+        | "months"
+        | "week"
+        | "weeks"
+        | "day"
+        | "days"
+        | "hour"
+        | "hours"
+        | "minute"
+        | "minutes"
+        | "second"
+        | "seconds";
 
     /**
      * The locale matching algorithm to use.
      *
      * [MDN](https://developer.mozilla.org/docs/Web/JavaScript/Reference/Global_Objects/Intl#Locale_negotiation).
-     *
-     * [Specification](https://tc39.es/ecma402/#sec-InitializeRelativeTimeFormat).
      */
     type RelativeTimeFormatLocaleMatcher = "lookup" | "best fit";
 
@@ -59,8 +61,6 @@ declare namespace Intl {
      * The format of output message.
      *
      * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/RelativeTimeFormat#Parameters).
-     *
-     * [Specification](https://tc39.es/ecma402/#sec-InitializeRelativeTimeFormat).
      */
     type RelativeTimeFormatNumeric = "always" | "auto";
 
@@ -68,33 +68,37 @@ declare namespace Intl {
      * The length of the internationalized message.
      *
      * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/RelativeTimeFormat#Parameters).
-     *
-     * [Specification](https://tc39.es/ecma402/#sec-InitializeRelativeTimeFormat).
      */
     type RelativeTimeFormatStyle = "long" | "short" | "narrow";
 
+    /**
+     * [BCP 47 language tag](http://tools.ietf.org/html/rfc5646) definition.
+     *
+     * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl#locales_argument).
+     */
+    type BCP47LanguageTag = string;
+
     /**
      * An object with some or all of properties of `options` parameter
      * of `Intl.RelativeTimeFormat` constructor.
      *
      * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/RelativeTimeFormat#Parameters).
-     *
-     * [Specification](https://tc39.es/ecma402/#sec-InitializeRelativeTimeFormat).
      */
     interface RelativeTimeFormatOptions {
+        /** The locale matching algorithm to use. For information about this option, see [Intl page](https://developer.mozilla.org/docs/Web/JavaScript/Reference/Global_Objects/Intl#Locale_negotiation). */
         localeMatcher?: RelativeTimeFormatLocaleMatcher;
+        /** The format of output message. */
         numeric?: RelativeTimeFormatNumeric;
+        /** The length of the internationalized message. */
         style?: RelativeTimeFormatStyle;
     }
 
     /**
      * An object with properties reflecting the locale
      * and formatting options computed during initialization
-     * of the `Intel.RelativeTimeFormat` object
+     * of the `Intl.RelativeTimeFormat` object
      *
      * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/resolvedOptions#Description).
-     *
-     * [Specification](https://tc39.es/ecma402/#table-relativetimeformat-resolvedoptions-properties)
      */
     interface ResolvedRelativeTimeFormatOptions {
         locale: UnicodeBCP47LocaleIdentifier;
@@ -108,8 +112,6 @@ declare namespace Intl {
      * that can be used for custom locale-aware formatting.
      *
      * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/formatToParts#Using_formatToParts).
-     *
-     * [Specification](https://tc39.es/ecma402/#sec-FormatRelativeTimeToParts).
      */
     interface RelativeTimeFormatPart {
         type: string;
@@ -126,6 +128,7 @@ declare namespace Intl {
          *
          * While this method automatically provides the correct plural forms,
          * the grammatical form is otherwise as neutral as possible.
+         *
          * It is the caller's responsibility to handle cut-off logic
          * such as deciding between displaying "in 7 days" or "in 1 week".
          * This API does not support relative dates involving compound units.
@@ -133,68 +136,33 @@ declare namespace Intl {
          *
          * @param value -  Numeric value to use in the internationalized relative time message
          *
-         * @param unit - [Unit](https://tc39.es/ecma402/#sec-singularrelativetimeunit)
-         *  to use in the relative time internationalized message.
-         *  Possible values are: `"year"`, `"quarter"`, `"month"`, `"week"`,
-         *  `"day"`, `"hour"`, `"minute"`, `"second"`.
-         *  Plural forms are also permitted.
+         * @param unit - [Unit](https://tc39.es/ecma402/#sec-singularrelativetimeunit) to use in the relative time internationalized message.
          *
          * @throws `RangeError` if `unit` was given something other than `unit` possible values
          *
-         * @returns Internationalized relative time message as string
+         * @returns {string} Internationalized relative time message as string
          *
          * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/format).
-         *
-         * [Specification](https://tc39.es/ecma402/#sec-Intl.RelativeTimeFormat.prototype.format).
          */
-        format(
-            value: number,
-            unit: RelativeTimeFormatUnit,
-        ): string;
+        format(value: number, unit: RelativeTimeFormatUnit): string;
 
         /**
-         *  A version of the format method which it returns an array of objects
-         *  which represent "parts" of the object,
-         *  separating the formatted number into its constituent parts
-         *  and separating it from other surrounding text.
-         *  These objects have two properties:
-         * `type` a NumberFormat formatToParts type, and `value`,
-         *  which is the String which is the component of the output.
-         *  If a "part" came from NumberFormat,
-         *  it will have a unit property which indicates the `unit` being formatted;
-         *  literals which are part of the larger frame will not have this property.
+         *  Returns an array of objects representing the relative time format in parts that can be used for custom locale-aware formatting.
          *
          *  @param value - Numeric value to use in the internationalized relative time message
          *
-         *  @param unit - [Unit](https://tc39.es/ecma402/#sec-singularrelativetimeunit)
-         *   to use in the relative time internationalized message.
-         *   Possible values are: `"year"`, `"quarter"`, `"month"`, `"week"`,
-         *   `"day"`, `"hour"`, `"minute"`, `"second"`.
-         *   Plural forms are also permitted.
+         *  @param unit - [Unit](https://tc39.es/ecma402/#sec-singularrelativetimeunit) to use in the relative time internationalized message.
          *
          *  @throws `RangeError` if `unit` was given something other than `unit` possible values
          *
-         *  @returns Array of [FormatRelativeTimeToParts](https://tc39.es/ecma402/#sec-FormatRelativeTimeToParts)
-         *
          *  [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/formatToParts).
-         *
-         *  [Specification](https://tc39.es/ecma402/#sec-Intl.RelativeTimeFormat.prototype.formatToParts).
          */
-        formatToParts(
-            value: number,
-            unit: RelativeTimeFormatUnit,
-        ): RelativeTimeFormatPart[];
+        formatToParts(value: number, unit: RelativeTimeFormatUnit): RelativeTimeFormatPart[];
 
         /**
          * Provides access to the locale and options computed during initialization of this `Intl.RelativeTimeFormat` object.
          *
-         * @returns A new object with properties reflecting the locale
-         *  and formatting options computed during initialization
-         *  of the `Intel.RelativeTimeFormat` object.
-         *
          * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/resolvedOptions).
-         *
-         * [Specification](https://tc39.es/ecma402/#sec-intl.relativetimeformat.prototype.resolvedoptions)
          */
         resolvedOptions(): ResolvedRelativeTimeFormatOptions;
     }
@@ -203,41 +171,22 @@ declare namespace Intl {
      * The [`Intl.RelativeTimeFormat`](https://developer.mozilla.org/docs/Web/JavaScript/Reference/Global_Objects/RelativeTimeFormat)
      * object is a constructor for objects that enable language-sensitive relative time formatting.
      *
-     * Part of [Intl object](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl)
-     * namespace and the [ECMAScript Internationalization API](https://www.ecma-international.org/publications/standards/Ecma-402.htm).
-     *
      * [Compatibility](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat#Browser_compatibility).
-     *
-     * [Polyfills](https://github.com/tc39/proposal-intl-relative-time#polyfills).
      */
     const RelativeTimeFormat: {
         /**
-         * Constructor creates [Intl.RelativeTimeFormat](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/RelativeTimeFormat)
-         * objects
+         * Creates [Intl.RelativeTimeFormat](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/RelativeTimeFormat) objects
          *
          * @param locales - A string with a [BCP 47 language tag](http://tools.ietf.org/html/rfc5646), or an array of such strings.
          *  For the general form and interpretation of the locales argument,
          *  see the [`Intl` page](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl#Locale_identification_and_negotiation).
          *
          * @param options - An [object](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/RelativeTimeFormat#Parameters)
-         *  with some or all of options of the formatting.
-         *  An object with some or all of the following properties:
-         *  - `localeMatcher` - The locale matching algorithm to use.
-         *    Possible values are `"lookup"` and `"best fit"`; the default is `"best fit"`.
-         *    For information about this option, see [Intl page](https://developer.mozilla.org/docs/Web/JavaScript/Reference/Global_Objects/Intl#Locale_negotiation).
-         *  - `numeric` - The format of output message.
-         *    Possible values are: `"always"` (default, e.g., `1 day ago`) or `"auto"` (e.g., `yesterday`).
-         *    The `"auto"` value allows to not always have to use numeric values in the output.
-         *  - `style` - The length of the internationalized message. Possible values are:
-         *    `"long"` (default, e.g., in 1 month),
-         *    `"short"` (e.g., in 1 mo.)
-         *    or `"narrow"` (e.g., in 1 mo.). The narrow style could be similar to the short style for some locales.
+         *  with some or all of options of `RelativeTimeFormatOptions`.
          *
          * @returns [Intl.RelativeTimeFormat](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/RelativeTimeFormat) object.
          *
          * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/RelativeTimeFormat).
-         *
-         * [Specification](https://tc39.es/ecma402/#sec-intl-relativetimeformat-constructor).
          */
         new(
             locales?: UnicodeBCP47LocaleIdentifier | UnicodeBCP47LocaleIdentifier[],
@@ -255,25 +204,12 @@ declare namespace Intl {
          *
          * @param options - An [object](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/RelativeTimeFormat#Parameters)
          *  with some or all of options of the formatting.
-         *  An object with some or all of the following properties:
-         *  - `localeMatcher` - The locale matching algorithm to use.
-         *    Possible values are `"lookup"` and `"best fit"`; the default is `"best fit"`.
-         *    For information about this option, see [Intl page](https://developer.mozilla.org/docs/Web/JavaScript/Reference/Global_Objects/Intl#Locale_negotiation).
-         *  - `numeric` - The format of output message.
-         *    Possible values are: `"always"` (default, e.g., `1 day ago`) or `"auto"` (e.g., `yesterday`).
-         *    The `"auto"` value allows to not always have to use numeric values in the output.
-         *  - `style` - The length of the internationalized message. Possible values are:
-         *    `"long"` (default, e.g., in 1 month),
-         *    `"short"` (e.g., in 1 mo.)
-         *    or `"narrow"` (e.g., in 1 mo.). The narrow style could be similar to the short style for some locales.
          *
          * @returns An array containing those of the provided locales
          *  that are supported in date and time formatting
          *  without having to fall back to the runtime's default locale.
          *
          * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/RelativeTimeFormat/supportedLocalesOf).
-         *
-         * [Specification](https://tc39.es/ecma402/#sec-Intl.RelativeTimeFormat.supportedLocalesOf).
          */
         supportedLocalesOf(
             locales?: UnicodeBCP47LocaleIdentifier | UnicodeBCP47LocaleIdentifier[],
@@ -282,28 +218,151 @@ declare namespace Intl {
     };
 
     interface NumberFormatOptions {
-        compactDisplay?: string;
-        notation?: string;
-        signDisplay?: string;
-        unit?: string;
-        unitDisplay?: string;
+        compactDisplay?: "short" | "long" | undefined;
+        notation?: "standard" | "scientific" | "engineering" | "compact" | undefined;
+        signDisplay?: "auto" | "never" | "always" | undefined;
+        unit?: string | undefined;
+        unitDisplay?: "short" | "long" | "narrow" | undefined;
     }
 
     interface ResolvedNumberFormatOptions {
-        compactDisplay?: string;
-        notation?: string;
-        signDisplay?: string;
+        compactDisplay?: "short" | "long";
+        notation?: "standard" | "scientific" | "engineering" | "compact";
+        signDisplay?: "auto" | "never" | "always";
         unit?: string;
-        unitDisplay?: string;
+        unitDisplay?: "short" | "long" | "narrow";
     }
 
     interface DateTimeFormatOptions {
-        dateStyle?: "full" | "long" | "medium" | "short";
-        timeStyle?: "full" | "long" | "medium" | "short";
+        calendar?: string | undefined;
+        dayPeriod?: "narrow" | "short" | "long" | undefined;
+        numberingSystem?: string | undefined;
+
+        dateStyle?: "full" | "long" | "medium" | "short" | undefined;
+        timeStyle?: "full" | "long" | "medium" | "short" | undefined;
+        hourCycle?: "h11" | "h12" | "h23" | "h24" | undefined;
+    }
+
+    type LocaleHourCycleKey = "h12" | "h23" | "h11" | "h24";
+    type LocaleCollationCaseFirst = "upper" | "lower" | "false";
+
+    interface LocaleOptions {
+        /** A string containing the language, and the script and region if available. */
+        baseName?: string;
+        /** The part of the Locale that indicates the locale's calendar era. */
         calendar?: string;
-        dayPeriod?: "narrow" | "short" | "long";
+        /** Flag that defines whether case is taken into account for the locale's collation rules. */
+        caseFirst?: LocaleCollationCaseFirst;
+        /** The collation type used for sorting */
+        collation?: string;
+        /** The time keeping format convention used by the locale. */
+        hourCycle?: LocaleHourCycleKey;
+        /** The primary language subtag associated with the locale. */
+        language?: string;
+        /** The numeral system used by the locale. */
         numberingSystem?: string;
-        hourCycle?: "h11" | "h12" | "h23" | "h24";
-        fractionalSecondDigits?: 0 | 1 | 2 | 3;
+        /** Flag that defines whether the locale has special collation handling for numeric characters. */
+        numeric?: boolean;
+        /** The region of the world (usually a country) associated with the locale. Possible values are region codes as defined by ISO 3166-1. */
+        region?: string;
+        /** The script used for writing the particular language used in the locale. Possible values are script codes as defined by ISO 15924. */
+        script?: string;
+    }
+
+    interface Locale extends LocaleOptions {
+        /** Gets the most likely values for the language, script, and region of the locale based on existing values. */
+        maximize(): Locale;
+        /** Attempts to remove information about the locale that would be added by calling `Locale.maximize()`. */
+        minimize(): Locale;
+        /** Returns the locale's full locale identifier string. */
+        toString(): BCP47LanguageTag;
     }
+
+    /**
+     * Constructor creates [Intl.Locale](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/Locale)
+     * objects
+     *
+     * @param tag - A string with a [BCP 47 language tag](http://tools.ietf.org/html/rfc5646).
+     *  For the general form and interpretation of the locales argument,
+     *  see the [`Intl` page](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl#Locale_identification_and_negotiation).
+     *
+     * @param options - An [object](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/Locale/Locale#Parameters) with some or all of options of the locale.
+     *
+     * @returns [Intl.Locale](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/Locale) object.
+     *
+     * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/Locale).
+     */
+    const Locale: {
+        new (tag?: BCP47LanguageTag, options?: LocaleOptions): Locale;
+    };
+
+     interface DisplayNamesOptions {
+        localeMatcher: RelativeTimeFormatLocaleMatcher;
+        style: RelativeTimeFormatStyle;
+        type: "language" | "region" | "script" | "currency";
+        fallback: "code" | "none";
+    }
+
+    interface DisplayNames {
+        /**
+         * Receives a code and returns a string based on the locale and options provided when instantiating
+         * [`Intl.DisplayNames()`](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/DisplayNames)
+         *
+         * @param code The `code` to provide depends on the `type` passed to display name during creation:
+         *  - If the type is `"region"`, code should be either an [ISO-3166 two letters region code](https://www.iso.org/iso-3166-country-codes.html),
+         *    or a [three digits UN M49 Geographic Regions](https://unstats.un.org/unsd/methodology/m49/).
+         *  - If the type is `"script"`, code should be an [ISO-15924 four letters script code](https://unicode.org/iso15924/iso15924-codes.html).
+         *  - If the type is `"language"`, code should be a `languageCode` ["-" `scriptCode`] ["-" `regionCode` ] *("-" `variant` )
+         *    subsequence of the unicode_language_id grammar in [UTS 35's Unicode Language and Locale Identifiers grammar](https://unicode.org/reports/tr35/#Unicode_language_identifier).
+         *    `languageCode` is either a two letters ISO 639-1 language code or a three letters ISO 639-2 language code.
+         *  - If the type is `"currency"`, code should be a [3-letter ISO 4217 currency code](https://www.iso.org/iso-4217-currency-codes.html).
+         *
+         * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/DisplayNames/of).
+         */
+        of(code: string): string;
+        /**
+         * Returns a new object with properties reflecting the locale and style formatting options computed during the construction of the current
+         * [`Intl/DisplayNames`](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/DisplayNames) object.
+         *
+         * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/DisplayNames/resolvedOptions).
+         */
+        resolvedOptions(): DisplayNamesOptions;
+    }
+
+    /**
+     * The [`Intl.DisplayNames()`](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/DisplayNames)
+     * object enables the consistent translation of language, region and script display names.
+     *
+     * [Compatibility](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/DisplayNames#browser_compatibility).
+     */
+    const DisplayNames: {
+        prototype: DisplayNames;
+
+        /**
+         * @param locales A string with a BCP 47 language tag, or an array of such strings.
+         *   For the general form and interpretation of the `locales` argument, see the [Intl](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl#locale_identification_and_negotiation)
+         *   page.
+         *
+         * @param options An object for setting up a display name.
+         *
+         * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/DisplayNames/DisplayNames).
+         */
+        new(locales?: BCP47LanguageTag | BCP47LanguageTag[], options?: Partial<DisplayNamesOptions>): DisplayNames;
+
+        /**
+         * Returns an array containing those of the provided locales that are supported in display names without having to fall back to the runtime's default locale.
+         *
+         * @param locales A string with a BCP 47 language tag, or an array of such strings.
+         *   For the general form and interpretation of the `locales` argument, see the [Intl](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl#locale_identification_and_negotiation)
+         *   page.
+         *
+         * @param options An object with a locale matcher.
+         *
+         * @returns An array of strings representing a subset of the given locale tags that are supported in display names without having to fall back to the runtime's default locale.
+         *
+         * [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Intl/DisplayNames/supportedLocalesOf).
+         */
+        supportedLocalesOf(locales: BCP47LanguageTag | BCP47LanguageTag[], options?: {localeMatcher: RelativeTimeFormatLocaleMatcher}): BCP47LanguageTag[];
+    };
+
 }