@types/node 26.1.2 → 26.2.0

node/quic.d.ts

@@ -1,7 +1,10 @@
 declare module "node:quic" {
-    import { KeyObject, webcrypto } from "node:crypto";
+    import { NonSharedBuffer } from "node:buffer";
+    import { KeyObject } from "node:crypto";
+    import { FileHandle } from "node:fs/promises";
     import { SocketAddress } from "node:net";
-    import { ReadableStream } from "node:stream/web";
+    import { Writer } from "node:stream/iter";
+    import { EphemeralKeyInfo, PeerCertificate } from "node:tls";
     /**
      * @since v23.8.0
      */
@@ -13,11 +16,15 @@ declare module "node:quic" {
     /**
      * @since v23.8.0
      */
-    type OnDatagramCallback = (this: QuicSession, datagram: Uint8Array, early: boolean) => void;
+    type OnDatagramCallback = (this: QuicSession, datagram: NodeJS.NonSharedUint8Array, early: boolean) => void;
     /**
      * @since v23.8.0
      */
-    type OnDatagramStatusCallback = (this: QuicSession, id: bigint, status: "lost" | "acknowledged") => void;
+    type OnDatagramStatusCallback = (
+        this: QuicSession,
+        id: bigint,
+        status: "acknowledged" | "lost" | "abandoned",
+    ) => void;
     /**
      * @since v23.8.0
      */
@@ -26,8 +33,8 @@ declare module "node:quic" {
         result: "success" | "failure" | "aborted",
         newLocalAddress: SocketAddress,
         newRemoteAddress: SocketAddress,
-        oldLocalAddress: SocketAddress,
-        oldRemoteAddress: SocketAddress,
+        oldLocalAddress: SocketAddress | null,
+        oldRemoteAddress: SocketAddress | null,
         preferredAddress: boolean,
     ) => void;
     /**
@@ -46,16 +53,32 @@ declare module "node:quic" {
     /**
      * @since v23.8.0
      */
-    type OnHandshakeCallback = (
-        this: QuicSession,
-        sni: string,
-        alpn: string,
-        cipher: string,
-        cipherVersion: string,
-        validationErrorReason: string,
-        validationErrorCode: number,
-        earlyDataAccepted: boolean,
-    ) => void;
+    type OnHandshakeCallback = (this: QuicSession, info: SessionHandshakeInfo) => void;
+    /**
+     * @since v26.2.0
+     */
+    type OnNewTokenCallback = (this: QuicSession, token: NonSharedBuffer, address: SocketAddress) => void;
+    /**
+     * @since v26.2.0
+     */
+    type OnOriginCallback = (this: QuicSession, origins: string[]) => void;
+    /**
+     * Called when TLS key material is available. Only fires when
+     * `sessionOptions.keylog` is `true`. Multiple lines are emitted during the
+     * TLS 1.3 handshake, each containing a secret label, the client random, and
+     * the secret value.
+     * @since v26.2.0
+     */
+    type OnKeylogCallback = (this: QuicSession, line: string) => void;
+    /**
+     * Called when qlog diagnostic data is available. Only fires when
+     * `sessionOptions.qlog` is `true`. The `data` chunks should be
+     * concatenated in order to produce the complete qlog output. When `fin` is
+     * `true`, no more chunks will be emitted and the concatenated result is a
+     * complete JSON-SEQ document.
+     * @since v26.2.0
+     */
+    type OnQlogCallback = (this: QuicSession, data: string, fin: boolean) => void;
     /**
      * @since v23.8.0
      */
@@ -64,17 +87,35 @@ declare module "node:quic" {
      * @since v23.8.0
      */
     type OnStreamErrorCallback = (this: QuicStream, error: any) => void;
+    /**
+     * Called when initial request or response headers are received. For HTTP/3,
+     * this delivers request pseudo-headers on the server and response headers
+     * on the client.
+     * @since v26.2.0
+     */
+    type OnHeadersCallback = (this: QuicStream, headers: NodeJS.Dict<string | string[]>) => void;
+    /**
+     * Called when trailing headers are received from the peer.
+     * @since v26.2.0
+     */
+    type OnTrailersCallback = (this: QuicStream, trailers: NodeJS.Dict<string | string[]>) => void;
+    /**
+     * Called when informational (1xx) headers are received from the server
+     * (e.g., 103 Early Hints).
+     * @since v26.2.0
+     */
+    type OnInfoCallback = (this: QuicStream, headers: NodeJS.Dict<string | string[]>) => void;
     /**
      * @since v23.8.0
      */
     interface TransportParams {
         /**
-         * The preferred IPv4 address to advertise.
+         * The preferred IPv4 address to advertise (only used by servers).
          * @since v23.8.0
          */
         preferredAddressIpv4?: SocketAddress | undefined;
         /**
-         * The preferred IPv6 address to advertise.
+         * The preferred IPv6 address to advertise (only used by servers)
          * @since v23.8.0
          */
         preferredAddressIpv6?: SocketAddress | undefined;
@@ -119,16 +160,74 @@ declare module "node:quic" {
          */
         maxAckDelay?: bigint | number | undefined;
         /**
+         * The maximum size in bytes of a DATAGRAM frame payload that this endpoint
+         * is willing to receive. Set to `0` to disable datagram support. The peer
+         * will not send datagrams larger than this value. The actual maximum size of
+         * a datagram that can be _sent_ is determined by the peer's
+         * `maxDatagramFrameSize`, not this endpoint's value.
          * @since v23.8.0
          */
         maxDatagramFrameSize?: bigint | number | undefined;
     }
     interface SNIEntry {
+        /**
+         * The TLS private keys. **Required.**
+         */
         keys: KeyObject | readonly KeyObject[];
+        /**
+         * The TLS certificates. **Required.**
+         */
         certs: ArrayBuffer | NodeJS.ArrayBufferView | ReadonlyArray<ArrayBuffer | NodeJS.ArrayBufferView>;
-        ca?: ArrayBuffer | NodeJS.ArrayBufferView | ReadonlyArray<ArrayBuffer | NodeJS.ArrayBufferView> | undefined;
-        crl?: ArrayBuffer | NodeJS.ArrayBufferView | ReadonlyArray<ArrayBuffer | NodeJS.ArrayBufferView> | undefined;
+        /**
+         * Verify the private key. Default: `false`.
+         */
         verifyPrivateKey?: boolean | undefined;
+        /**
+         * The port to advertise in ORIGIN frames (RFC 9412) for this host name. **Default:** `443`. Only used for HTTP/3 sessions.
+         */
+        port?: number | undefined;
+        /**
+         * Whether to include this host name in ORIGIN frames. **Default:** `true`. Set to `false` to exclude a host name
+         * from ORIGIN advertisements. Wildcard (`'*'`) entries are always excluded regardless of this setting.
+         */
+        authoritative?: boolean | undefined;
+    }
+    interface ApplicationOptions {
+        /**
+         * Maximum number of header name-value pairs accepted per header block. Headers beyond this limit are silently
+         * dropped. **Default:** `128`
+         */
+        maxHeaderPairs?: number | undefined;
+        /**
+         * Maximum total byte length of all header names and values combined per header block. Headers that would push
+         * the total over this limit are silently dropped. **Default:** `8192`
+         */
+        maxHeaderLength?: number | undefined;
+        /**
+         * Maximum size of a compressed header field section (QPACK). `0` means unlimited. **Default:** `0`
+         */
+        maxFieldSectionSize?: number | undefined;
+        /**
+         * QPACK dynamic table capacity in bytes. Set to `0` to disable the dynamic table. **Default:** `4096`
+         */
+        qpackMaxDTableCapacity?: number | undefined;
+        /**
+         * QPACK encoder maximum dynamic table capacity. **Default:** `4096`
+         */
+        qpackEncoderMaxDTableCapacity?: number | undefined;
+        /**
+         * Maximum number of streams that can be blocked waiting for QPACK dynamic table updates.
+         * **Default:** `100`
+         */
+        qpackBlockedStreams?: number | undefined;
+        /**
+         * Enable the extended CONNECT protocol (RFC 9220). **Default:** `false`
+         */
+        enableConnectProtocol?: boolean | undefined;
+        /**
+         * Enable HTTP/3 datagrams (RFC 9297). **Default:** `false`
+         */
+        enableDatagrams?: boolean | undefined;
     }
     /**
      * @since v23.8.0
@@ -156,6 +255,12 @@ declare module "node:quic" {
          * @since v26.1.0
          */
         alpn?: string | readonly string[] | undefined;
+        /**
+         * HTTP/3 application-specific options. These only apply when the negotiated
+         * ALPN selects the HTTP/3 application (`'h3'`).
+         * @since v26.2.0
+         */
+        application?: ApplicationOptions | undefined;
         /**
          * The CA certificates to use for client sessions. For server sessions, CA
          * certificates are specified per-identity in the `sessionOptions.sni` map.
@@ -188,12 +293,23 @@ declare module "node:quic" {
          */
         crl?: ArrayBuffer | NodeJS.ArrayBufferView | ReadonlyArray<ArrayBuffer | NodeJS.ArrayBufferView> | undefined;
         /**
-         * The list of support TLS 1.3 cipher groups.
+         * When `true`, enables TLS 0-RTT early data for this session. Early data
+         * allows the client to send application data before the TLS handshake
+         * completes, reducing latency on reconnection when a valid session ticket
+         * is available. Set to `false` to disable early data support.
+         * @since v26.2.0
+         */
+        enableEarlyData?: boolean | undefined;
+        /**
+         * The list of supported TLS 1.3 cipher groups.
          * @since v23.8.0
          */
         groups?: string | undefined;
         /**
-         * True to enable TLS keylogging output.
+         * When `true`, enables TLS key logging for the session. Key material is
+         * delivered to the `session.onkeylog` callback in [NSS Key Log Format](https://udn.realityripple.com/docs/Mozilla/Projects/NSS/Key_Log_Format).
+         * Each callback invocation receives a single line of key material. The output
+         * can be used with tools such as Wireshark to decrypt captured QUIC traffic.
          * @since v23.8.0
          */
         keylog?: boolean | undefined;
@@ -231,7 +347,10 @@ declare module "node:quic" {
          */
         preferredAddressPolicy?: "use" | "ignore" | "default" | undefined;
         /**
-         * True if qlog output should be enabled.
+         * When `true`, enables [qlog](https://datatracker.ietf.org/doc/draft-ietf-quic-qlog-main-schema/) diagnostic output for the session. Qlog data
+         * is delivered to the `session.onqlog` callback as chunks of [JSON-SEQ](https://www.rfc-editor.org/rfc/rfc7464)
+         * formatted text. The output can be analyzed with qlog visualization tools
+         * such as [qvis](https://qvis.quictools.info/).
          * @since v23.8.0
          */
         qlog?: boolean | undefined;
@@ -241,8 +360,40 @@ declare module "node:quic" {
          */
         sessionTicket?: NodeJS.ArrayBufferView | undefined;
         /**
-         * Specifies the maximum number of milliseconds a TLS handshake is permitted to take
-         * to complete before timing out.
+         * Controls which datagram to drop when the pending datagram queue
+         * (sized by `session.maxPendingDatagrams`) is full. Must be one of
+         * `'drop-oldest'` (discard the oldest queued datagram to make room) or
+         * `'drop-newest'` (reject the incoming datagram). Dropped datagrams are
+         * reported as lost via the `ondatagramstatus` callback.
+         *
+         * This option is immutable after session creation.
+         * @since v26.2.0
+         */
+        datagramDropPolicy?: "drop-oldest" | "drop-newest" | undefined;
+        /**
+         * The maximum number of `SendPendingData` cycles a datagram can survive
+         * without being sent before it is abandoned. When a datagram cannot be
+         * sent due to congestion control or packet size constraints, it remains
+         * in the queue and the attempt counter increments. Once the limit is
+         * reached, the datagram is dropped and reported as `'abandoned'` via the
+         * `ondatagramstatus` callback. Valid range: `1` to `255`.
+         * @since v26.2.0
+         */
+        maxDatagramSendAttempts?: number | undefined;
+        /**
+         * A multiplier applied to the Probe Timeout (PTO) to compute the draining
+         * period duration after receiving a `CONNECTION_CLOSE` frame from the peer.
+         * RFC 9000 Section 10.2 requires the draining period to persist for at least
+         * three times the current PTO. The valid range is `3` to `255`. Values below
+         * `3` are clamped to `3`.
+         * @since v26.2.0
+         */
+        drainingPeriodMultiplier?: number | undefined;
+        /**
+         * Specifies the keep-alive timeout in milliseconds. When set to a non-zero
+         * value, PING frames will be sent automatically to keep the connection alive
+         * before the idle timeout fires. The value should be less than the effective
+         * idle timeout (`maxIdleTimeout` transport parameter) to be useful.
          * @since v23.8.0
          */
         handshakeTimeout?: bigint | number | undefined;
@@ -253,28 +404,12 @@ declare module "node:quic" {
         servername?: string | undefined;
         /**
          * An object mapping host names to TLS identity options for Server Name
-         * Indication (SNI) support. This is required for server sessions. The
-         * special key `'*'` specifies the default/fallback identity used when
-         * no other host name matches. Each entry may contain:
-         *
-         * ```js
-         * const endpoint = await listen(callback, {
-         *   sni: {
-         *     '*': { keys: [defaultKey], certs: [defaultCert] },
-         *     'api.example.com': { keys: [apiKey], certs: [apiCert] },
-         *     'www.example.com': { keys: [wwwKey], certs: [wwwCert], ca: [customCA] },
-         *   },
-         * });
-         * ```
-         *
-         * Shared TLS options (such as `ciphers`, `groups`, `keylog`, and `verifyClient`)
-         * are specified at the top level of the session options and apply to all
-         * identities. Each SNI entry overrides only the per-identity certificate
-         * fields.
-         *
-         * The SNI map can be replaced at runtime using `endpoint.setSNIContexts()`,
-         * which atomically swaps the map for new sessions while existing sessions
-         * continue to use their original identity.
+         * Indication (SNI) support. This is required for server sessions and must
+         * contain at least one entry. The special key `'*'` specifies the optional
+         * default/fallback identity used when no other host name matches. If no
+         * wildcard entry is provided, connections with unrecognized server names
+         * will be rejected with a TLS `unrecognized_name` alert. Each entry may
+         * contain:
          * @since v26.1.0
          */
         sni?: Record<string, SNIEntry> | undefined;
@@ -283,6 +418,14 @@ declare module "node:quic" {
          * @since v23.8.0
          */
         tlsTrace?: boolean | undefined;
+        /**
+         * An opaque address validation token previously received from the server
+         * via the `session.onnewtoken` callback. Providing a valid token on
+         * reconnection allows the client to skip the server's address validation,
+         * reducing handshake latency.
+         * @since v26.2.0
+         */
+        token?: NodeJS.ArrayBufferView | undefined;
         /**
          * The QUIC transport parameters to use for the session.
          * @since v23.8.0
@@ -293,6 +436,27 @@ declare module "node:quic" {
          * @since v23.8.0
          */
         unacknowledgedPacketThreshold?: bigint | number | undefined;
+        /**
+         * If `true`, the peer certificate is verified against the list of supplied CAs.
+         * An error is emitted if verification fails; the error can be inspected via
+         * the `validationErrorReason` and `validationErrorCode` fields in the
+         * handshake callback. If `false`, peer certificate verification errors are
+         * ignored.
+         */
+        rejectUnauthorized?: boolean | undefined;
+        /**
+         * When `true` (the default), `connect()` will attempt to reuse an existing
+         * endpoint rather than creating a new one for each session. This provides
+         * connection pooling behavior — multiple sessions can share a single UDP
+         * socket. The reuse logic will not return an endpoint that is listening on
+         * the same address as the connect target (to prevent CID routing conflicts).
+         *
+         * Set to `false` to force creation of a new endpoint for the session. This
+         * is useful when endpoint isolation is required (e.g., testing stateless
+         * reset behavior where source port identity matters).
+         * @since v26.2.0
+         */
+        reuseEndpoint?: boolean | undefined;
         /**
          * True to require verification of TLS client certificate.
          * @since v23.8.0
@@ -311,6 +475,25 @@ declare module "node:quic" {
          * @since v23.8.0
          */
         version?: number | undefined;
+        // Undocumented
+        onerror?: QuicSession["onerror"] | undefined;
+        onstream?: QuicSession["onstream"] | undefined;
+        ondatagram?: QuicSession["ondatagram"] | undefined;
+        ondatagramstatus?: QuicSession["ondatagramstatus"] | undefined;
+        onpathvalidation?: QuicSession["onpathvalidation"] | undefined;
+        onsessionticket?: QuicSession["onsessionticket"] | undefined;
+        onversionnegotiation?: QuicSession["onversionnegotiation"] | undefined;
+        onhandshake?: QuicSession["onhandshake"] | undefined;
+        onnewtoken?: QuicSession["onnewtoken"] | undefined;
+        onearlyrejected?: QuicSession["onearlyrejected"] | undefined;
+        onorigin?: QuicSession["onorigin"] | undefined;
+        ongoaway?: QuicSession["ongoaway"] | undefined;
+        onkeylog?: QuicSession["onkeylog"] | undefined;
+        onqlog?: QuicSession["onqlog"] | undefined;
+        onheaders?: QuicStream["onheaders"] | undefined;
+        ontrailers?: QuicStream["ontrailers"] | undefined;
+        oninfo?: QuicStream["oninfo"] | undefined;
+        onwanttrailers?: QuicStream["onwanttrailers"] | undefined;
     }
     /**
      * Initiate a new client-side session.
@@ -389,26 +572,58 @@ declare module "node:quic" {
         /**
          * The endpoint maintains an internal cache of validated socket addresses as a
          * performance optimization. This option sets the maximum number of addresses
-         * that are cache. This is an advanced option that users typically won't have
+         * that are cached. This is an advanced option that users typically won't have
          * need to specify.
          * @since v23.8.0
          */
         addressLRUSize?: bigint | number | undefined;
+        /**
+         * When `true`, the endpoint will not send stateless reset packets in response
+         * to packets from unknown connections. Stateless resets allow a peer to detect
+         * that a connection has been lost even when the server has no state for it.
+         * Disabling them may be useful in testing or when stateless resets are handled
+         * at a different layer.
+         * @since v26.2.0
+         */
+        disableStatelessReset?: boolean | undefined;
+        /**
+         * The number of seconds an endpoint will remain alive after all sessions have
+         * closed and it is no longer listening. A value of `0` (default) means the
+         * endpoint is only destroyed when explicitly closed via `endpoint.close()` or
+         * `endpoint.destroy()`. A positive value starts an idle timer when the endpoint
+         * becomes idle; if no new sessions are created before the timer fires, the
+         * endpoint is automatically destroyed. This is useful for connection pooling
+         * where endpoints should linger briefly for reuse by future `connect()` calls.
+         * @since v26.2.0
+         */
+        idleTimeout?: number | undefined;
         /**
          * When `true`, indicates that the endpoint should bind only to IPv6 addresses.
          * @since v23.8.0
          */
         ipv6Only?: boolean | undefined;
         /**
-         * Specifies the maximum number of concurrent sessions allowed per remote peer address.
+         * Specifies the maximum number of concurrent sessions allowed per remote IP
+         * address (ignoring port). When the limit is reached, new connections from the
+         * same IP are refused with `CONNECTION_REFUSED`. A value of `0` disables the
+         * limit. The maximum value is `65535`.
+         *
+         * This limit can also be changed dynamically after construction via
+         * `endpoint.maxConnectionsPerHost`.
          * @since v23.8.0
          */
-        maxConnectionsPerHost?: bigint | number | undefined;
+        maxConnectionsPerHost?: number | undefined;
         /**
-         * Specifies the maximum total number of concurrent sessions.
+         * Specifies the maximum total number of concurrent sessions across all remote
+         * addresses. When the limit is reached, new connections are refused with
+         * `CONNECTION_REFUSED`. A value of `0` disables the limit. The maximum value is
+         * `65535`.
+         *
+         * This limit can also be changed dynamically after construction via
+         * `endpoint.maxConnectionsTotal`.
          * @since v23.8.0
          */
-        maxConnectionsTotal?: bigint | number | undefined;
+        maxConnectionsTotal?: number | undefined;
         /**
          * Specifies the maximum number of QUIC retry attempts allowed per remote peer address.
          * @since v23.8.0
@@ -525,9 +740,25 @@ declare module "node:quic" {
         readonly destroyed: boolean;
         /**
          * True if the endpoint is actively listening for incoming connections. Read only.
-         * @since v26.1.0
+         * @since v26.2.0
          */
         readonly listening: boolean;
+        /**
+         * The maximum number of concurrent connections allowed per remote IP address.
+         * `0` means unlimited (default). Can be set at construction time via the
+         * `maxConnectionsPerHost` option and changed dynamically at any time.
+         * The valid range is `0` to `65535`.
+         * @since v26.2.0
+         */
+        maxConnectionsPerHost: number;
+        /**
+         * The maximum total number of concurrent connections across all remote
+         * addresses. `0` means unlimited (default). Can be set at construction time via
+         * the `maxConnectionsTotal` option and changed dynamically at any time.
+         * The valid range is `0` to `65535`.
+         * @since v26.2.0
+         */
+        maxConnectionsTotal: number;
         /**
          * Replaces or updates the SNI TLS contexts for this endpoint. This allows
          * changing the TLS identity (key/certificate) used for specific host names
@@ -550,7 +781,7 @@ declare module "node:quic" {
          */
         setSNIContexts(entries: Record<string, SNIEntry>, options?: SetSNIContextsOptions): void;
         /**
-         * The statistics collected for an active session. Read only.
+         * The statistics collected for an active endpoint. Read only.
          * @since v23.8.0
          */
         readonly stats: QuicEndpoint.Stats;
@@ -620,7 +851,7 @@ declare module "node:quic" {
              */
             readonly retryCount: bigint;
             /**
-             * The total number sessions rejected due to QUIC version mismatch. Read only.
+             * The total number of sessions rejected due to QUIC version mismatch. Read only.
              * @since v23.8.0
              */
             readonly versionNegotiationCount: bigint;
@@ -637,8 +868,124 @@ declare module "node:quic" {
         }
     }
     interface CreateStreamOptions {
-        body?: ArrayBuffer | NodeJS.ArrayBufferView | Blob | undefined;
-        sendOrder?: number | undefined;
+        /**
+         * The outbound body source. See `stream.setBody()` for details on
+         * supported types. When omitted, the stream starts half-closed (writable
+         * side open, no body queued).
+         */
+        body?: StreamBody | undefined;
+        /**
+         * Initial request or response headers to send. Only
+         * used when the session supports headers (e.g. HTTP/3). If `body` is not
+         * specified and `headers` is provided, the stream is treated as
+         * headers-only (terminal).
+         */
+        headers?: NodeJS.Dict<string | readonly string[]> | readonly string[] | undefined;
+        /**
+         * The priority level of the stream. One of `'high'`,
+         * `'default'`, or `'low'`. **Default:** `'default'`.
+         */
+        priority?: "high" | "default" | "low" | undefined;
+        /**
+         * When `true`, data from this stream may be
+         * interleaved with data from other streams of the same priority level.
+         * When `false`, the stream should be completed before same-priority peers.
+         * **Default:** `false`.
+         */
+        incremental?: boolean | undefined;
+        /**
+         * The maximum number of bytes that the writer
+         * will buffer before `writeSync()` returns `false`. When the buffered
+         * data exceeds this limit, the caller should wait for drain before
+         * writing more. **Default:** `65536` (64 KB).
+         */
+        highWaterMark?: number | undefined;
+        /**
+         * Callback for received initial response headers.
+         * Called with `(headers)`.
+         */
+        onheaders?: QuicStream["onheaders"] | undefined;
+        /**
+         * Callback for received trailing headers.
+         * Called with `(trailers)`.
+         */
+        ontrailers?: QuicStream["ontrailers"] | undefined;
+        /**
+         * Callback for received informational (1xx) headers.
+         * Called with `(headers)`.
+         */
+        oninfo?: QuicStream["oninfo"] | undefined;
+        /**
+         * Callback when trailers should be sent.
+         */
+        onwanttrailers?: QuicStream["onwanttrailers"] | undefined;
+    }
+    interface SessionDestroyOptions {
+        /**
+         * The error code to include in the `CONNECTION_CLOSE`
+         * frame sent to the peer. **Default:** `0` (no error).
+         */
+        code?: bigint | number | undefined;
+        /**
+         * Either `'transport'` or `'application'`. Determines the
+         * error code namespace used in the `CONNECTION_CLOSE` frame. When `'transport'`
+         * (the default), the frame type is `0x1c` and the code is interpreted as a QUIC
+         * transport error. When `'application'`, the frame type is `0x1d` and the code
+         * is application-specific. **Default:** `'transport'`.
+         */
+        type?: "transport" | "application" | undefined;
+        /**
+         * An optional human-readable reason string included in
+         * the `CONNECTION_CLOSE` frame. Per RFC 9000, this is for diagnostic purposes
+         * only and should not be used for machine-readable error descriptions.
+         */
+        reason?: string | undefined;
+    }
+    interface SessionHandshakeInfo {
+        /**
+         * The local socket address.
+         */
+        local: SocketAddress;
+        /**
+         * The remote socket address.
+         */
+        remote: SocketAddress;
+        /**
+         * The SNI server name negotiated during the handshake.
+         */
+        servername: string;
+        /**
+         * The ALPN protocol negotiated during the handshake.
+         */
+        protocol: string;
+        /**
+         * The name of the negotiated TLS cipher suite.
+         */
+        cipher: string;
+        /**
+         * The TLS protocol version of the cipher suite
+         * (e.g., `'TLSv1.3'`).
+         */
+        cipherVersion: string;
+        /**
+         * If certificate validation failed, the
+         * reason string. Empty string if validation succeeded.
+         */
+        validationErrorReason: string;
+        /**
+         * If certificate validation failed, the
+         * error code. `0` if validation succeeded.
+         */
+        validationErrorCode: number;
+        /**
+         * Whether 0-RTT early data was attempted.
+         */
+        earlyDataAttempted: boolean;
+        /**
+         * Whether 0-RTT early data was accepted by
+         * the server.
+         */
+        earlyDataAccepted: boolean;
     }
     interface SessionPath {
         local: SocketAddress;
@@ -654,36 +1001,85 @@ declare module "node:quic" {
          * Initiate a graceful close of the session. Existing streams will be allowed
          * to complete but no new streams will be opened. Once all streams have closed,
          * the session will be destroyed. The returned promise will be fulfilled once
-         * the session has been destroyed.
+         * the session has been destroyed. If a non-zero `code` is specified, the
+         * promise will reject with an `ERR_QUIC_TRANSPORT_ERROR` or
+         * `ERR_QUIC_APPLICATION_ERROR` depending on the `type`.
          * @since v23.8.0
          */
-        close(): Promise<void>;
+        close(options?: SessionDestroyOptions): Promise<void>;
+        /**
+         * A promise that is fulfilled once the TLS handshake completes successfully.
+         * The resolved value contains information about the established session
+         * including the negotiated protocol, cipher suite, certificate validation
+         * status, and 0-RTT early data status.
+         *
+         * If the handshake fails or the session is destroyed before the handshake
+         * completes, the promise will be rejected.
+         * @since v26.2.0
+         */
+        readonly opened: Promise<SessionHandshakeInfo>;
         /**
          * A promise that is fulfilled once the session is destroyed.
          * @since v23.8.0
          */
         readonly closed: Promise<void>;
         /**
-         * Immediately destroy the session. All streams will be destroys and the
-         * session will be closed.
+         * True if `session.close()` has been called and the session has not yet
+         * been destroyed. Read only.
+         * @since v26.2.0
+         */
+        readonly closing: boolean;
+        /**
+         * Immediately destroy the session. All streams will be destroyed and the
+         * session will be closed. If `error` is provided and [`session.onerror`][] is
+         * set, the `onerror` callback is invoked before destruction. The
+         * `session.closed` promise will reject with the error. If `options` is
+         * provided, the `CONNECTION_CLOSE` frame sent to the peer will include the
+         * specified error code, type, and reason.
          * @since v23.8.0
          */
-        destroy(error?: any): void;
+        destroy(error?: any, options?: SessionDestroyOptions): void;
         /**
          * True if `session.destroy()` has been called. Read only.
          * @since v23.8.0
          */
         readonly destroyed: boolean;
         /**
-         * The endpoint that created this session. Read only.
+         * The endpoint that created this session. Returns `null` if the session
+         * has been destroyed. Read only.
          * @since v23.8.0
          */
-        readonly endpoint: QuicEndpoint;
+        readonly endpoint: QuicEndpoint | null;
+        /**
+         * An optional callback invoked when the session is destroyed with an error.
+         * This includes errors caused by user callbacks that throw or reject (see
+         * [Callback error handling](https://nodejs.org/docs/latest-v26.x/api/quic.html#callback-error-handling)). The callback receives a single argument: the
+         * error that triggered the destruction. If the `onerror` callback itself throws
+         * or returns a promise that rejects, the error is surfaced as an uncaught
+         * exception. Read/write.
+         *
+         * Can also be set via the `onerror` option in `quic.connect()` or
+         * `quic.listen()`.
+         * @since v26.2.0
+         */
+        onerror: ((this: QuicSession, error: any) => void) | undefined;
         /**
          * The callback to invoke when a new stream is initiated by a remote peer. Read/write.
          * @since v23.8.0
          */
         onstream: OnStreamCallback | undefined;
+        /**
+         * The callback to invoke when the server rejects 0-RTT early data. When
+         * this fires, all streams that were opened during the 0-RTT phase have
+         * been destroyed. The application should re-open streams if needed.
+         * Read/write.
+         *
+         * This callback only fires on the client side when the server rejects
+         * the client's 0-RTT attempt. The connection falls back to 1-RTT and
+         * continues normally.
+         * @since v26.2.0
+         */
+        onearlyrejected: ((this: QuicSession) => void) | undefined;
         /**
          * The callback to invoke when a new datagram is received from a remote peer. Read/write.
          * @since v23.8.0
@@ -714,15 +1110,81 @@ declare module "node:quic" {
          * @since v23.8.0
          */
         onhandshake: OnHandshakeCallback | undefined;
+        /**
+         * The callback to invoke when a NEW\_TOKEN token is received from the server.
+         * The token can be passed as the `token` option on a future connection to
+         * the same server to skip address validation. Read/write.
+         * @since v26.2.0
+         */
+        onnewtoken: OnNewTokenCallback | undefined;
+        /**
+         * The callback to invoke when an ORIGIN frame (RFC 9412) is received from
+         * the server, indicating which origins the server is authoritative for.
+         * Read/write.
+         * @since v26.2.0
+         */
+        onorigin: OnOriginCallback | undefined;
+        /**
+         * The callback to invoke when the peer sends an HTTP/3 GOAWAY frame,
+         * indicating it is initiating a graceful shutdown. The callback receives
+         * `(lastStreamId)` where `lastStreamId` is a `{bigint}`:
+         *
+         * * When `lastStreamId` is `-1n`, the peer sent a shutdown notice (intent
+         *   to close) without specifying a stream boundary. All existing streams
+         *   may still be processed.
+         * * When `lastStreamId` is `>= 0n`, it is the highest stream ID the peer
+         *   may have processed. Streams with IDs above this value were NOT
+         *   processed and can be safely retried on a new connection.
+         *
+         * After GOAWAY is received, `session.createBidirectionalStream()` will
+         * throw `ERR_INVALID_STATE`. Existing streams continue until they
+         * complete or the session closes.
+         *
+         * This callback is only relevant for HTTP/3 sessions. Read/write.
+         * @since v26.2.0
+         */
+        ongoaway: ((this: QuicSession, lastStreamId: bigint) => void) | undefined;
+        /**
+         * The callback to invoke when TLS key material is available. Requires
+         * `sessionOptions.keylog` to be `true`. Each invocation receives a single
+         * line of [NSS Key Log Format](https://udn.realityripple.com/docs/Mozilla/Projects/NSS/Key_Log_Format) text (including a trailing newline). This is
+         * useful for decrypting packet captures with tools like Wireshark. Read/write.
+         *
+         * Can also be set via the `onkeylog` option in `quic.connect()` or
+         * `quic.listen()`.
+         * @since v26.2.0
+         */
+        onkeylog: OnKeylogCallback | undefined;
+        /**
+         * The callback to invoke when qlog data is available. Requires
+         * `sessionOptions.qlog` to be `true`. The callback receives a string
+         * chunk of [JSON-SEQ](https://www.rfc-editor.org/rfc/rfc7464) formatted qlog data and a boolean `fin` flag. When
+         * `fin` is `true`, the chunk is the final qlog output for this session and
+         * the concatenated chunks form a complete qlog trace. Read/write.
+         *
+         * Qlog data arrives during the connection lifecycle. The first chunk contains
+         * the qlog header with format metadata. Subsequent chunks contain trace
+         * events. The final chunk (with `fin` set to `true`) is emitted during
+         * session destruction and completes the JSON-SEQ output.
+         *
+         * Can also be set via the `onqlog` option in `quic.connect()` or
+         * `quic.listen()`.
+         * @since v26.2.0
+         */
+        onqlog: OnQlogCallback | undefined;
         /**
          * Open a new bidirectional stream. If the `body` option is not specified,
-         * the outgoing stream will be half-closed.
+         * the outgoing stream will be half-closed. The `priority` and `incremental`
+         * options are only used when the session supports priority (e.g. HTTP/3).
+         * The `headers`, `onheaders`, `ontrailers`, `oninfo`, and `onwanttrailers`
+         * options are only used when the session supports headers (e.g. HTTP/3).
          * @since v23.8.0
          */
         createBidirectionalStream(options?: CreateStreamOptions): Promise<QuicStream>;
         /**
          * Open a new unidirectional stream. If the `body` option is not specified,
-         * the outgoing stream will be closed.
+         * the outgoing stream will be closed. The `priority` and `incremental`
+         * options are only used when the session supports priority (e.g. HTTP/3).
          * @since v23.8.0
          */
         createUnidirectionalStream(options?: CreateStreamOptions): Promise<QuicStream>;
@@ -732,12 +1194,92 @@ declare module "node:quic" {
          */
         path: SessionPath | undefined;
         /**
-         * Sends an unreliable datagram to the remote peer, returning the datagram ID.
-         * If the datagram payload is specified as an `ArrayBufferView`, then ownership of
-         * that view will be transferred to the underlying stream.
-         * @since v23.8.0
+         * Sends an unreliable datagram to the remote peer, returning a promise for
+         * the datagram ID.
+         *
+         * If `datagram` is a string, it will be encoded using the specified `encoding`.
+         *
+         * If `datagram` is an `ArrayBufferView`, the bytes are copied into an
+         * internal buffer; the caller's source buffer is unchanged and may be reused
+         * or mutated immediately after the call returns. Callers that want to ensure
+         * their source cannot be mutated after the call (for example, when handing
+         * the buffer off to another async consumer) can call
+         * `ArrayBuffer.prototype.transfer()` themselves before passing the buffer.
+         *
+         * If `datagram` is a `Promise`, it will be awaited before sending. If the
+         * session closes while awaiting, `0n` is returned silently (datagrams are
+         * inherently unreliable).
+         *
+         * If the datagram payload is zero-length (empty string after encoding, detached
+         * buffer, or zero-length view), `0n` is returned and no datagram is sent.
+         *
+         * For HTTP/3 sessions, the peer must advertise `SETTINGS_H3_DATAGRAM=1`
+         * (via `application: { enableDatagrams: true }`) for datagrams to be sent.
+         * If the peer's setting is `0`, `sendDatagram()` returns `0n` (per RFC 9297
+         * §3, an endpoint MUST NOT send HTTP Datagrams unless the peer indicated
+         * support).
+         *
+         * Datagrams cannot be fragmented — each must fit within a single QUIC packet.
+         * The maximum datagram size is determined by the peer's
+         * `maxDatagramFrameSize` transport parameter (which the peer advertises during
+         * the handshake). If the peer sets this to `0`, datagrams are not supported
+         * and `0n` will be returned. If the datagram exceeds the peer's limit, it
+         * will be silently dropped and `0n` returned. The local
+         * `maxDatagramFrameSize` transport parameter (default: `1200` bytes) controls
+         * what this endpoint advertises to the peer as its own maximum.
+         * @since v23.8.0
+         * @param encoding The encoding to use if `datagram` is a string.
+         * **Default:** `'utf8'`.
+         */
+        sendDatagram(
+            datagram: string | NodeJS.ArrayBufferView | Promise<string | NodeJS.ArrayBufferView>,
+            encoding?: BufferEncoding,
+        ): Promise<bigint>;
+        /**
+         * The local certificate as an object with properties such as `subject`,
+         * `issuer`, `valid_from`, `valid_to`, `fingerprint`, etc. Returns `undefined`
+         * if the session is destroyed or no certificate is available.
+         * @since v26.2.0
+         */
+        readonly certificate: PeerCertificate | undefined;
+        /**
+         * The peer's certificate as an object with properties such as `subject`,
+         * `issuer`, `valid_from`, `valid_to`, `fingerprint`, etc. Returns `undefined`
+         * if the session is destroyed or the peer did not present a certificate.
+         * @since v26.2.0
+         */
+        readonly peerCertificate: PeerCertificate | undefined;
+        /**
+         * The ephemeral key information for the session, with properties such as
+         * `type`, `name`, and `size`. Only available on client sessions. Returns
+         * `undefined` for server sessions or if the session is destroyed.
+         * @since v26.2.0
+         */
+        readonly ephemeralKeyInfo: EphemeralKeyInfo | undefined;
+        /**
+         * The maximum datagram payload size in bytes that the peer will accept.
+         * This is derived from the peer's `maxDatagramFrameSize` transport
+         * parameter minus the DATAGRAM frame overhead (type byte and variable-length
+         * integer encoding). Returns `0` if the peer does not support datagrams or
+         * if the handshake has not yet completed. Datagrams larger than this value
+         * will not be sent.
+         * @since v26.2.0
+         */
+        readonly maxDatagramSize: number;
+        /**
+         * The maximum number of datagrams that can be queued for sending. Datagrams
+         * are queued when `sendDatagram()` is called and sent opportunistically
+         * alongside stream data by the packet serialization loop. When the queue
+         * is full, the `sessionOptions.datagramDropPolicy` determines whether
+         * the oldest or newest datagram is dropped. Dropped datagrams are reported
+         * as lost via the `ondatagramstatus` callback.
+         *
+         * This property can be changed dynamically to adjust queue capacity
+         * based on application activity or memory pressure. The valid range
+         * is `0` to `65535`.
+         * @since v26.2.0
          */
-        sendDatagram(datagram: string | NodeJS.ArrayBufferView): bigint;
+        maxPendingDatagrams: number;
         /**
          * Return the current statistics for the session. Read only.
          * @since v23.8.0
@@ -804,7 +1346,7 @@ declare module "node:quic" {
             /**
              * @since v23.8.0
              */
-            readonly maxBytesInFlights: bigint;
+            readonly maxBytesInFlight: bigint;
             /**
              * @since v23.8.0
              */
@@ -855,55 +1397,458 @@ declare module "node:quic" {
             readonly datagramsLost: bigint;
         }
     }
+    interface QuicErrorOptions {
+        /**
+         * The numeric QUIC error code. Numbers
+         * are coerced to `BigInt`. Must be a non-negative 62-bit unsigned
+         * varint (`0n <= errorCode <= 2n ** 62n - 1n`).
+         */
+        errorCode?: bigint | number | undefined;
+        /**
+         * The Node.js-style error code string assigned to
+         * `error.code`. Defaults to `'ERR_QUIC_STREAM_ABORTED'`.
+         */
+        code?: string | undefined;
+        /**
+         * Either `'application'` (default) or `'transport'`.
+         * Indicates whether the code is defined by the negotiated
+         * application protocol (e.g. RFC 9114 for HTTP/3) or by the QUIC
+         * transport layer (RFC 9000). Stream resets always carry application
+         * codes, so the default is `'application'`.
+         */
+        type?: "application" | "transport" | undefined;
+    }
+    /**
+     * A `QuicError` is an `Error` subclass that carries an explicit numeric
+     * QUIC error code. Use it to abort a QUIC stream or session with a
+     * specific application-protocol-defined error code rather than letting
+     * the implementation pick a generic fallback.
+     *
+     * The class is exported from `node:quic`:
+     *
+     * ```js
+     * import { QuicError } from 'node:quic';
+     * ```
+     *
+     * When a `QuicError` is supplied to APIs that emit a wire frame
+     * (`writer.fail()`, `stream.destroy()`), the QUIC stack uses
+     * `error.errorCode` as the wire code for the resulting frame.
+     * When any other value is supplied (for example a plain `Error`), the
+     * implementation falls back to the negotiated application protocol's
+     * "internal error" code (`H3_INTERNAL_ERROR` (`0x102`) for HTTP/3, or
+     * the QUIC transport-layer `INTERNAL_ERROR` (`0x1`) for raw QUIC).
+     *
+     * The Node.js error code (`error.code`) defaults to
+     * `'ERR_QUIC_STREAM_ABORTED'`. Callers who need a more specific code
+     * string can override it via `options.code` — the numeric QUIC code
+     * is unaffected.
+     *
+     * The Node.js error code is fixed at `'ERR_QUIC_STREAM_ABORTED'` so that
+     * catch blocks can distinguish a `QuicError` from other Node.js errors
+     * without checking the prototype chain. The numeric QUIC code lives on
+     * the separate `error.errorCode` property to avoid colliding with
+     * the Node.js convention that `error.code` is a string.
+     * @since v26.2.0
+     * @experimental
+     */
+    class QuicError extends Error {
+        /**
+         * ```js
+         * import { QuicError } from 'node:quic';
+         *
+         * const err = new QuicError('rejecting stream', { errorCode: 0x10cn });
+         * console.log(err.code);       // 'ERR_QUIC_STREAM_ABORTED'
+         * console.log(err.errorCode);  // 268n
+         * console.log(err.type);       // 'application'
+         *
+         * const custom = new QuicError('custom failure', {
+         *   errorCode: 0x10cn,
+         *   code: 'ERR_MY_QUIC_FAILURE',
+         * });
+         * console.log(custom.code);    // 'ERR_MY_QUIC_FAILURE'
+         * ```
+         * @param message A human-readable description of the error.
+         */
+        constructor(message: string, options?: QuicErrorOptions);
+        /**
+         * The numeric QUIC error code carried by this error.
+         * @since v26.2.0
+         */
+        readonly errorCode: bigint;
+        /**
+         * Either `'application'` or `'transport'`. Indicates the namespace of
+         * `error.errorCode`.
+         * @since v26.2.0
+         */
+        readonly type: "application" | "transport";
+    }
+    type StreamBody =
+        | null
+        | string
+        | ArrayBufferLike
+        | NodeJS.ArrayBufferView
+        | Blob
+        | FileHandle
+        | Iterable<string | Uint8Array>
+        | AsyncIterable<string | Uint8Array>
+        | Promise<StreamBody>;
+    interface StreamPriority {
+        /**
+         * One of `'high'`, `'default'`, or `'low'`.
+         */
+        level: "high" | "default" | "low";
+        /**
+         * Whether the stream data should be interleaved
+         * with other streams of the same priority level.
+         */
+        incremental: boolean;
+    }
+    interface StreamDestroyOptions {
+        /**
+         * The application error code to include in the
+         * `RESET_STREAM` and `STOP_SENDING` frames sent to the peer. Numbers are
+         * coerced to `BigInt`. When omitted, the wire code is derived from `error`
+         * (see below).
+         */
+        code?: bigint | number | undefined;
+        /**
+         * An optional human-readable reason string. Accepted for
+         * symmetry with `session.close()` and `session.destroy()`, but
+         * **not transmitted on the wire** — neither `RESET_STREAM` nor
+         * `STOP_SENDING` carry a reason field. Provided for application logging
+         * and for use by the `stream.onerror` callback.
+         */
+        reason?: string | undefined;
+    }
+    interface StreamSendHeadersOptions {
+        /**
+         * If `true`, the stream is closed for sending
+         * after the headers (no body will follow). **Default:** `false`.
+         */
+        terminal?: boolean | undefined;
+    }
     /**
      * @since v23.8.0
      */
     class QuicStream {
         private constructor();
         /**
-         * A promise that is fulfilled when the stream is fully closed.
+         * A promise that is fulfilled when the stream is fully closed. It resolves
+         * when the stream closes cleanly (including idle timeout). It rejects with
+         * an `ERR_QUIC_APPLICATION_ERROR` or `ERR_QUIC_TRANSPORT_ERROR` when the
+         * stream is closed due to a QUIC error (e.g., stream reset by the peer,
+         * CONNECTION\_CLOSE with a non-zero error code).
          * @since v23.8.0
          */
         readonly closed: Promise<void>;
         /**
-         * Immediately and abruptly destroys the stream.
+         * Immediately and abruptly destroys the stream. If `error` is provided and
+         * `stream.onerror` is set, the `onerror` callback is invoked before
+         * destruction. The `stream.closed` promise rejects with the error.
+         *
+         * When the stream is destroyed with an `error` (or with an explicit
+         * `options.code`), the QUIC stack signals the abort to the peer:
+         *
+         * * If the writable side is still open, a `RESET_STREAM` frame is sent.
+         * * If the readable side is still open (a bidirectional stream, or a
+         *   remote-initiated unidirectional stream), a `STOP_SENDING` frame is sent.
+         *
+         * Both frames carry the same wire code, resolved with the following
+         * precedence:
+         *
+         * 1. `options.code`, when explicitly provided.
+         * 2. [`error.errorCode`][], when `error` is a [`QuicError`][].
+         * 3. The negotiated application protocol's "internal error" code
+         *    (`H3_INTERNAL_ERROR` (`0x102`) for HTTP/3, or the QUIC transport-layer
+         *    `INTERNAL_ERROR` (`0x1`) for raw QUIC).
+         *
+         * A clean destroy — no `error` and no `options.code` — does not emit
+         * `RESET_STREAM` or `STOP_SENDING`; the stream's existing close machinery
+         * handles teardown.
+         *
+         * See [Aborting a stream](https://nodejs.org/docs/latest-v26.x/api/quic.html#aborting-a-stream) for an overview of the available stream-abort
+         * APIs.
          * @since v23.8.0
          */
-        destroy(error?: any): void;
+        destroy(error?: any, options?: StreamDestroyOptions): void;
         /**
          * True if `stream.destroy()` has been called.
          * @since v23.8.0
          */
         readonly destroyed: boolean;
         /**
-         * The directionality of the stream. Read only.
+         * True if any data on this stream was received as 0-RTT (early data)
+         * before the TLS handshake completed. Early data is less secure and
+         * could potentially be replayed by an attacker. Applications should
+         * treat early data with appropriate caution.
+         *
+         * This property is only meaningful on the server side. On the client
+         * side, it is always `false`.
+         * @since v26.2.0
+         */
+        readonly early: boolean;
+        /**
+         * The directionality of the stream, or `null` if the stream has been destroyed
+         * or is still pending. Read only.
          * @since v23.8.0
          */
-        readonly direction: "bidi" | "uni";
+        readonly direction: "bidi" | "uni" | null;
+        /**
+         * The maximum number of bytes that the writer will buffer before
+         * `writeSync()` returns `false`. When the buffered data exceeds this limit,
+         * the caller should wait for drain before writing more.
+         *
+         * The value can be changed dynamically at any time. This is particularly
+         * useful for streams received via the `onstream` callback, where the
+         * default (65536) may need to be adjusted based on application needs.
+         * The valid range is `0` to `4294967295`.
+         * @since v26.2.0
+         */
+        highWaterMark: number;
         /**
-         * The stream ID. Read only.
+         * The stream ID, or `null` if the stream has been destroyed or is still
+         * pending. Read only.
          * @since v23.8.0
          */
-        readonly id: bigint;
+        readonly id: bigint | null;
+        /**
+         * An optional callback invoked when the stream is destroyed with an error.
+         * This includes errors caused by user callbacks that throw or reject (see
+         * [Callback error handling](https://nodejs.org/docs/latest-26.x/api/quic.html#callback-error-handling)). The callback receives a single argument: the
+         * error that triggered the destruction. If the `onerror` callback itself throws
+         * or returns a promise that rejects, the error is surfaced as an uncaught
+         * exception. Read/write.
+         * @since v26.2.0
+         */
+        onerror: ((this: QuicStream, error: any) => void) | undefined;
         /**
          * The callback to invoke when the stream is blocked. Read/write.
          * @since v23.8.0
          */
         onblocked: OnBlockedCallback | undefined;
         /**
-         * The callback to invoke when the stream is reset. Read/write.
+         * The callback to invoke when the peer aborts a direction of the stream by
+         * sending a `RESET_STREAM` frame (the peer abandons their writable side, so
+         * no further data will arrive on our readable side) or a `STOP_SENDING`
+         * frame (the peer asks us to stop writing on our writable side).
+         *
+         * The callback receives a Node.js error whose `errorCode` (`bigint`)
+         * property carries the application error code from the wire frame.
+         *
+         * The stream is **not** automatically destroyed when this callback fires —
+         * the application chooses how to react. Common patterns are: ignore (and
+         * continue using the still-active direction on a bidirectional stream),
+         * abort the other direction with `writer.fail()`, or tear down the
+         * whole stream with `stream.destroy()`. Read/write.
          * @since v23.8.0
          */
         onreset: OnStreamErrorCallback | undefined;
         /**
-         * @since v23.8.0
+         * The buffered initial headers received on this stream, or `undefined` if the
+         * application does not support headers or no headers have been received yet.
+         * For server-side streams, this contains the request headers (e.g., `:method`,
+         * `:path`, `:scheme`). For client-side streams, this contains the response
+         * headers (e.g., `:status`).
+         *
+         * Header names are lowercase strings. Multi-value headers are represented as
+         * arrays. The object has `__proto__: null`.
+         * @since v26.2.0
+         */
+        readonly headers: NodeJS.Dict<string | string[]> | undefined;
+        /**
+         * The callback to invoke when initial headers are received on the stream. The
+         * callback receives `(headers)` where `headers` is an object (same format as
+         * `stream.headers`). For HTTP/3, this delivers request pseudo-headers on the
+         * server side and response headers on the client side. Throws
+         * `ERR_INVALID_STATE` if set on a session that does not support headers.
+         * Read/write.
+         * @since v26.2.0
+         */
+        onheaders: ((this: QuicStream, headers: NodeJS.Dict<string | string[]>) => void) | undefined;
+        /**
+         * The callback to invoke when trailing headers are received from the peer.
+         * The callback receives `(trailers)` where `trailers` is an object in the
+         * same format as `stream.headers`. Throws `ERR_INVALID_STATE` if set on a
+         * session that does not support headers. Read/write.
+         * @since v26.2.0
+         */
+        ontrailers: ((this: QuicStream, trailers: NodeJS.Dict<string | string[]>) => void) | undefined;
+        /**
+         * The callback to invoke when informational (1xx) headers are received from
+         * the server. The callback receives `(headers)` where `headers` is an object
+         * in the same format as `stream.headers`. Informational headers are sent
+         * before the final response (e.g., 103 Early Hints). Throws
+         * `ERR_INVALID_STATE` if set on a session that does not support headers.
+         * Read/write.
+         * @since v26.2.0
+         */
+        oninfo: ((this: QuicStream, headers: NodeJS.Dict<string | string[]>) => void) | undefined;
+        /**
+         * The callback to invoke when the application is ready for trailing headers
+         * to be sent. This is called synchronously — the user must call
+         * `stream.sendTrailers()` within this callback. Throws
+         * `ERR_INVALID_STATE` if set on a session that does not support headers.
+         * Read/write.
+         * @since v26.2.0
+         */
+        onwanttrailers: ((this: QuicStream) => void) | undefined;
+        /**
+         * Set trailing headers to be sent automatically when the application requests
+         * them. This is an alternative to the `stream.onwanttrailers` callback
+         * for cases where the trailers are known before the body completes. Throws
+         * `ERR_INVALID_STATE` if set on a session that does not support headers.
+         * Read/write.
+         * @since v26.2.0
+         */
+        pendingTrailers: NodeJS.Dict<string | string[]> | undefined;
+        /**
+         * Sends initial or response headers on the stream. For client-side streams,
+         * this sends request headers. For server-side streams, this sends response
+         * headers. Throws `ERR_INVALID_STATE` if the session does not support headers.
+         * @since v26.2.0
+         * @param headers Header object with string keys and string or
+         * string-array values. Pseudo-headers (`:method`, `:path`, etc.) must
+         * appear before regular headers.
+         */
+        sendHeaders(headers: NodeJS.Dict<string | string[]>, options?: StreamSendHeadersOptions): boolean;
+        /**
+         * Sends informational (1xx) response headers. Server only. Throws
+         * `ERR_INVALID_STATE` if the session does not support headers.
+         * @since v26.2.0
+         * @param headers Header object. Must include `:status` with a 1xx
+         * value (e.g., `{ ':status': '103', 'link': '</style.css>; rel=preload' }`).
+         */
+        sendInformationalHeaders(headers: NodeJS.Dict<string | string[]>): boolean;
+        /**
+         * Sends trailing headers on the stream. Must be called synchronously during
+         * the `stream.onwanttrailers` callback, or set ahead of time via
+         * `stream.pendingTrailers`. Throws `ERR_INVALID_STATE` if the session
+         * does not support headers.
+         * @since v26.2.0
+         * @param headers Trailing header object. Pseudo-headers must not be
+         * included in trailers.
+         */
+        sendTrailers(headers: NodeJS.Dict<string | string[]>): boolean;
+        /**
+         * The current priority of the stream. Returns `null` if the session does not
+         * support priority (e.g. non-HTTP/3) or if the stream has been destroyed.
+         * Read only. Use `stream.setPriority()` to change the priority.
+         *
+         * On client-side HTTP/3 sessions, the value reflects what was set via
+         * `stream.setPriority()`. On server-side HTTP/3 sessions, the value
+         * reflects the peer's requested priority (e.g., from `PRIORITY_UPDATE` frames).
+         * @since v26.2.0
+         */
+        readonly priority: StreamPriority | null;
+        /**
+         * Sets the priority of the stream. Throws `ERR_INVALID_STATE` if the session
+         * does not support priority (e.g. non-HTTP/3). Has no effect if the stream
+         * has been destroyed.
+         * @since v26.2.0
+         */
+        setPriority(options?: NodeJS.PartialOptions<StreamPriority>): void;
+        /**
+         * The stream implements `Symbol.asyncIterator`, making it directly usable
+         * in `for await...of` loops. Each iteration yields a batch of `Uint8Array`
+         * chunks.
+         *
+         * Only one async iterator can be obtained per stream. A second call throws
+         * `ERR_INVALID_STATE`. Non-readable streams (outbound-only unidirectional
+         * or closed) return an immediately-finished iterator.
+         *
+         * ```js
+         * for await (const chunks of stream) {
+         *   for (const chunk of chunks) {
+         *     // Process each Uint8Array chunk
+         *   }
+         * }
+         * ```
+         *
+         * Compatible with stream/iter utilities:
+         *
+         * ```js
+         * import Stream from 'node:stream/iter';
+         * const body = await Stream.bytes(stream);
+         * const text = await Stream.text(stream);
+         * await Stream.pipeTo(stream, someWriter);
+         * ```
+         * @since v26.2.0
          */
-        readonly readable: ReadableStream<Uint8Array>;
+        [Symbol.asyncIterator](): NodeJS.AsyncIterator<NodeJS.NonSharedUint8Array[]>;
         /**
-         * The session that created this stream. Read only.
+         * Returns a Writer object for pushing data to the stream incrementally.
+         * The Writer implements the stream/iter Writer interface with the
+         * try-sync-fallback-to-async pattern.
+         *
+         * Only available when no `body` source was provided at creation time or via
+         * `stream.setBody()`. Non-writable streams return an already-closed
+         * Writer. Throws `ERR_INVALID_STATE` if the outbound is already configured.
+         *
+         * The Writer has the following methods:
+         *
+         * * `writeSync(chunk)` — Synchronous write. Returns `true` if accepted,
+         *   `false` if flow-controlled. Data is NOT accepted on `false`.
+         * * `write(chunk[, options])` — Async write with drain wait. `options.signal`
+         *   is checked at entry but not observed during the write.
+         * * `writevSync(chunks)` — Synchronous vectored write. All-or-nothing.
+         * * `writev(chunks[, options])` — Async vectored write.
+         * * `endSync()` — Synchronous close. Returns total bytes or `-1`.
+         * * `end([options])` — Async close.
+         * * `fail(reason)` — Errors the stream (sends `RESET_STREAM` to peer).
+         *   When `reason` is a `QuicError`, its `error.errorCode` is used
+         *   as the wire code on the resulting `RESET_STREAM` frame; otherwise
+         *   the wire code falls back to the negotiated application protocol's
+         *   "internal error" code (`H3_INTERNAL_ERROR` (`0x102`) for HTTP/3, or
+         *   the QUIC transport-layer `INTERNAL_ERROR` (`0x1`) for raw QUIC).
+         *   See `stream.destroy()` for a full-stream abort that also resets
+         *   the readable side via `STOP_SENDING`.
+         * * `desiredSize` — Available capacity in bytes, or `null` if closed/errored.
+         *
+         * The bytes from each `writeSync()` / `writevSync()` / `write()` / `writev()`
+         * input chunk are copied into an internal buffer, so the caller's source
+         * buffer is unchanged and may be reused or mutated immediately after the
+         * call returns. Callers that want to ensure a source buffer cannot be
+         * mutated after handing it off can call `ArrayBuffer.prototype.transfer()`
+         * themselves before passing the buffer.
+         * @since v26.2.0
+         */
+        readonly writer: Writer;
+        /**
+         * Sets the outbound body source for the stream. Can only be called once.
+         * Mutually exclusive with `stream.writer`.
+         *
+         * The following body source types are supported:
+         *
+         * * `null` — The writable side is closed immediately (FIN sent with no data).
+         * * `string` — UTF-8 encoded and sent as a single chunk.
+         * * `ArrayBuffer`, `SharedArrayBuffer`, `ArrayBufferView` — Sent as a single
+         *   chunk. The bytes are copied into an internal buffer, so the caller's
+         *   source buffer is unchanged and may be reused or mutated immediately
+         *   after the call returns. Callers wanting to ensure their source cannot
+         *   be mutated after handing it off can call
+         *   `ArrayBuffer.prototype.transfer()` themselves before passing the buffer.
+         * * `Blob` — Sent from the Blob's underlying data queue.
+         * * {FileHandle} — The file contents are read asynchronously via an
+         *   fd-backed data source. The `FileHandle` must be opened for reading
+         *   (e.g. via [`fs.promises.open(path, 'r')`][]). Once passed as a body, the
+         *   `FileHandle` is locked and cannot be used as a body for another stream.
+         *   The `FileHandle` is automatically closed when the stream finishes.
+         * * `AsyncIterable`, `Iterable` — Each yielded chunk (string or
+         *   `Uint8Array`) is written incrementally in streaming mode.
+         * * `Promise` — Awaited; the resolved value is used as the body (subject
+         *   to the same type rules).
+         *
+         * Throws `ERR_INVALID_STATE` if the outbound is already configured or if
+         * the writer has been accessed.
+         * @since v26.2.0
+         */
+        setBody(body: StreamBody): void;
+        /**
+         * The session that created this stream, or `null` if the stream has been
+         * destroyed. Read only.
          * @since v23.8.0
          */
-        readonly session: QuicSession;
+        readonly session: QuicSession | null;
         /**
          * The current statistics for the stream. Read only.
          * @since v23.8.0
@@ -966,13 +1911,33 @@ declare module "node:quic" {
             readonly receivedAt: bigint;
         }
     }
+    /**
+     * An object containing commonly used constants for QUIC configuration.
+     * @since v26.2.0
+     */
     namespace constants {
+        /**
+         * Congestion control algorithm identifiers, for use with the
+         * `sessionOptions.cc` option:
+         *
+         * * `quic.constants.cc.RENO` — Reno congestion control.
+         * * `quic.constants.cc.CUBIC` — CUBIC congestion control.
+         * * `quic.constants.cc.BBR` — BBR congestion control.
+         */
         enum cc {
             RENO = "reno",
             CUBIC = "cubic",
             BBR = "bbr",
         }
+        /**
+         * The default TLS 1.3 cipher suite list used when `sessionOptions.ciphers`
+         * is not specified.
+         */
         const DEFAULT_CIPHERS: string;
+        /**
+         * The default TLS 1.3 key-exchange group list used when
+         * `sessionOptions.groups` is not specified.
+         */
         const DEFAULT_GROUPS: string;
     }
 }