@tx5dr/contracts 1.2.0

package/dist/schema/radio.schema.d.ts

@@ -0,0 +1,1438 @@
+import { z } from 'zod';
+/**
+ * 预设频率Schema
+ */
+export declare const PresetFrequencySchema: z.ZodObject<{
+    band: z.ZodString;
+    mode: z.ZodString;
+    radioMode: z.ZodOptional<z.ZodString>;
+    frequency: z.ZodNumber;
+    description: z.ZodOptional<z.ZodString>;
+}, "strip", z.ZodTypeAny, {
+    mode: string;
+    frequency: number;
+    band: string;
+    radioMode?: string | undefined;
+    description?: string | undefined;
+}, {
+    mode: string;
+    frequency: number;
+    band: string;
+    radioMode?: string | undefined;
+    description?: string | undefined;
+}>;
+/**
+ * 频率列表响应Schema
+ */
+export declare const FrequencyListResponseSchema: z.ZodObject<{
+    success: z.ZodBoolean;
+    presets: z.ZodArray<z.ZodObject<{
+        band: z.ZodString;
+        mode: z.ZodString;
+        radioMode: z.ZodOptional<z.ZodString>;
+        frequency: z.ZodNumber;
+        description: z.ZodOptional<z.ZodString>;
+    }, "strip", z.ZodTypeAny, {
+        mode: string;
+        frequency: number;
+        band: string;
+        radioMode?: string | undefined;
+        description?: string | undefined;
+    }, {
+        mode: string;
+        frequency: number;
+        band: string;
+        radioMode?: string | undefined;
+        description?: string | undefined;
+    }>, "many">;
+}, "strip", z.ZodTypeAny, {
+    success: boolean;
+    presets: {
+        mode: string;
+        frequency: number;
+        band: string;
+        radioMode?: string | undefined;
+        description?: string | undefined;
+    }[];
+}, {
+    success: boolean;
+    presets: {
+        mode: string;
+        frequency: number;
+        band: string;
+        radioMode?: string | undefined;
+        description?: string | undefined;
+    }[];
+}>;
+/**
+ * 串口配置参数Schema
+ */
+export declare const SerialConfigSchema: z.ZodObject<{
+    data_bits: z.ZodOptional<z.ZodEnum<["5", "6", "7", "8"]>>;
+    stop_bits: z.ZodOptional<z.ZodEnum<["1", "2"]>>;
+    serial_parity: z.ZodOptional<z.ZodEnum<["None", "Even", "Odd", "Mark", "Space"]>>;
+    serial_handshake: z.ZodOptional<z.ZodEnum<["None", "Hardware", "Software"]>>;
+    rts_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
+    dtr_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
+    rate: z.ZodOptional<z.ZodNumber>;
+    timeout: z.ZodOptional<z.ZodNumber>;
+    retry: z.ZodOptional<z.ZodNumber>;
+    write_delay: z.ZodOptional<z.ZodNumber>;
+    post_write_delay: z.ZodOptional<z.ZodNumber>;
+}, "strip", z.ZodTypeAny, {
+    data_bits?: "5" | "6" | "7" | "8" | undefined;
+    stop_bits?: "1" | "2" | undefined;
+    serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+    serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+    rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+    dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+    rate?: number | undefined;
+    timeout?: number | undefined;
+    retry?: number | undefined;
+    write_delay?: number | undefined;
+    post_write_delay?: number | undefined;
+}, {
+    data_bits?: "5" | "6" | "7" | "8" | undefined;
+    stop_bits?: "1" | "2" | undefined;
+    serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+    serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+    rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+    dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+    rate?: number | undefined;
+    timeout?: number | undefined;
+    retry?: number | undefined;
+    write_delay?: number | undefined;
+    post_write_delay?: number | undefined;
+}>;
+export declare const HamlibBackendConfigSchema: z.ZodRecord<z.ZodString, z.ZodString>;
+export declare const HamlibConfigFieldTypeSchema: z.ZodEnum<["string", "combo", "numeric", "checkbutton", "button", "binary", "int", "unknown"]>;
+export declare const HamlibConfigFieldSchema: z.ZodObject<{
+    token: z.ZodNumber;
+    name: z.ZodString;
+    label: z.ZodString;
+    tooltip: z.ZodString;
+    defaultValue: z.ZodString;
+    effectiveDefaultValue: z.ZodOptional<z.ZodString>;
+    effectiveDefaultSource: z.ZodOptional<z.ZodEnum<["hamlib-schema", "rig-caps"]>>;
+    type: z.ZodEnum<["string", "combo", "numeric", "checkbutton", "button", "binary", "int", "unknown"]>;
+    numeric: z.ZodOptional<z.ZodObject<{
+        min: z.ZodNumber;
+        max: z.ZodNumber;
+        step: z.ZodNumber;
+    }, "strip", z.ZodTypeAny, {
+        min: number;
+        max: number;
+        step: number;
+    }, {
+        min: number;
+        max: number;
+        step: number;
+    }>>;
+    options: z.ZodOptional<z.ZodArray<z.ZodString, "many">>;
+}, "strip", z.ZodTypeAny, {
+    type: "string" | "unknown" | "combo" | "numeric" | "checkbutton" | "button" | "binary" | "int";
+    name: string;
+    label: string;
+    token: number;
+    tooltip: string;
+    defaultValue: string;
+    options?: string[] | undefined;
+    numeric?: {
+        min: number;
+        max: number;
+        step: number;
+    } | undefined;
+    effectiveDefaultValue?: string | undefined;
+    effectiveDefaultSource?: "hamlib-schema" | "rig-caps" | undefined;
+}, {
+    type: "string" | "unknown" | "combo" | "numeric" | "checkbutton" | "button" | "binary" | "int";
+    name: string;
+    label: string;
+    token: number;
+    tooltip: string;
+    defaultValue: string;
+    options?: string[] | undefined;
+    numeric?: {
+        min: number;
+        max: number;
+        step: number;
+    } | undefined;
+    effectiveDefaultValue?: string | undefined;
+    effectiveDefaultSource?: "hamlib-schema" | "rig-caps" | undefined;
+}>;
+export declare const RigEndpointKindSchema: z.ZodEnum<["serial-port", "network-address", "device-path"]>;
+/**
+ * 网络 RigCtld 连接配置Schema
+ */
+export declare const NetworkConfigSchema: z.ZodObject<{
+    host: z.ZodString;
+    port: z.ZodNumber;
+}, "strip", z.ZodTypeAny, {
+    host: string;
+    port: number;
+}, {
+    host: string;
+    port: number;
+}>;
+/**
+ * ICOM WLAN 连接配置Schema
+ */
+export declare const IcomWlanConfigSchema: z.ZodObject<{
+    ip: z.ZodString;
+    port: z.ZodNumber;
+    userName: z.ZodOptional<z.ZodString>;
+    password: z.ZodOptional<z.ZodString>;
+    /**
+     * 数据模式（Data Mode）
+     * 启用时使用 USB-D 等数字模式，适用于 FT8/FT4 等数字通信
+     * 默认值: true
+     */
+    dataMode: z.ZodDefault<z.ZodOptional<z.ZodBoolean>>;
+}, "strip", z.ZodTypeAny, {
+    ip: string;
+    port: number;
+    dataMode: boolean;
+    userName?: string | undefined;
+    password?: string | undefined;
+}, {
+    ip: string;
+    port: number;
+    userName?: string | undefined;
+    password?: string | undefined;
+    dataMode?: boolean | undefined;
+}>;
+/**
+ * 串口连接配置Schema
+ */
+export declare const SerialConnectionConfigSchema: z.ZodObject<{
+    path: z.ZodString;
+    rigModel: z.ZodNumber;
+    serialConfig: z.ZodOptional<z.ZodObject<{
+        data_bits: z.ZodOptional<z.ZodEnum<["5", "6", "7", "8"]>>;
+        stop_bits: z.ZodOptional<z.ZodEnum<["1", "2"]>>;
+        serial_parity: z.ZodOptional<z.ZodEnum<["None", "Even", "Odd", "Mark", "Space"]>>;
+        serial_handshake: z.ZodOptional<z.ZodEnum<["None", "Hardware", "Software"]>>;
+        rts_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
+        dtr_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
+        rate: z.ZodOptional<z.ZodNumber>;
+        timeout: z.ZodOptional<z.ZodNumber>;
+        retry: z.ZodOptional<z.ZodNumber>;
+        write_delay: z.ZodOptional<z.ZodNumber>;
+        post_write_delay: z.ZodOptional<z.ZodNumber>;
+    }, "strip", z.ZodTypeAny, {
+        data_bits?: "5" | "6" | "7" | "8" | undefined;
+        stop_bits?: "1" | "2" | undefined;
+        serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+        serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+        rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+        dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+        rate?: number | undefined;
+        timeout?: number | undefined;
+        retry?: number | undefined;
+        write_delay?: number | undefined;
+        post_write_delay?: number | undefined;
+    }, {
+        data_bits?: "5" | "6" | "7" | "8" | undefined;
+        stop_bits?: "1" | "2" | undefined;
+        serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+        serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+        rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+        dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+        rate?: number | undefined;
+        timeout?: number | undefined;
+        retry?: number | undefined;
+        write_delay?: number | undefined;
+        post_write_delay?: number | undefined;
+    }>>;
+    backendConfig: z.ZodOptional<z.ZodRecord<z.ZodString, z.ZodString>>;
+}, "strip", z.ZodTypeAny, {
+    path: string;
+    rigModel: number;
+    serialConfig?: {
+        data_bits?: "5" | "6" | "7" | "8" | undefined;
+        stop_bits?: "1" | "2" | undefined;
+        serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+        serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+        rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+        dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+        rate?: number | undefined;
+        timeout?: number | undefined;
+        retry?: number | undefined;
+        write_delay?: number | undefined;
+        post_write_delay?: number | undefined;
+    } | undefined;
+    backendConfig?: Record<string, string> | undefined;
+}, {
+    path: string;
+    rigModel: number;
+    serialConfig?: {
+        data_bits?: "5" | "6" | "7" | "8" | undefined;
+        stop_bits?: "1" | "2" | undefined;
+        serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+        serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+        rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+        dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+        rate?: number | undefined;
+        timeout?: number | undefined;
+        retry?: number | undefined;
+        write_delay?: number | undefined;
+        post_write_delay?: number | undefined;
+    } | undefined;
+    backendConfig?: Record<string, string> | undefined;
+}>;
+export declare const HamlibSpectrumConfigSchema: z.ZodObject<{
+    speed: z.ZodOptional<z.ZodNumber>;
+}, "strip", z.ZodTypeAny, {
+    speed?: number | undefined;
+}, {
+    speed?: number | undefined;
+}>;
+/**
+ * PTT (Push-to-Talk) 方法Schema
+ *
+ * - cat: 通过 CAT 命令控制 PTT（Hamlib RIG 类型，推荐）
+ * - vox: 不主动控制 PTT，电台通过检测音频信号自动发射（适用于 SignaLink USB 等）
+ * - dtr: 通过 RS-232 DTR 引脚控制 PTT（适用于古老电台或外部功放）
+ * - rts: 通过 RS-232 RTS 引脚控制 PTT（适用于古老电台或外部功放）
+ */
+export declare const PttMethodSchema: z.ZodEnum<["cat", "vox", "dtr", "rts"]>;
+/**
+ * Hamlib配置Schema - 嵌套对象结构
+ *
+ * 设计理念：
+ * - type: 当前使用的连接类型
+ * - network/icomWlan/serial: 各连接类型的独立配置对象
+ * - 所有配置对象共存，切换连接类型时保留历史配置
+ * - 根据 type 字段读取对应的配置对象
+ */
+export declare const HamlibConfigSchema: z.ZodObject<{
+    type: z.ZodEnum<["none", "network", "serial", "icom-wlan"]>;
+    network: z.ZodOptional<z.ZodObject<{
+        host: z.ZodString;
+        port: z.ZodNumber;
+    }, "strip", z.ZodTypeAny, {
+        host: string;
+        port: number;
+    }, {
+        host: string;
+        port: number;
+    }>>;
+    icomWlan: z.ZodOptional<z.ZodObject<{
+        ip: z.ZodString;
+        port: z.ZodNumber;
+        userName: z.ZodOptional<z.ZodString>;
+        password: z.ZodOptional<z.ZodString>;
+        /**
+         * 数据模式（Data Mode）
+         * 启用时使用 USB-D 等数字模式，适用于 FT8/FT4 等数字通信
+         * 默认值: true
+         */
+        dataMode: z.ZodDefault<z.ZodOptional<z.ZodBoolean>>;
+    }, "strip", z.ZodTypeAny, {
+        ip: string;
+        port: number;
+        dataMode: boolean;
+        userName?: string | undefined;
+        password?: string | undefined;
+    }, {
+        ip: string;
+        port: number;
+        userName?: string | undefined;
+        password?: string | undefined;
+        dataMode?: boolean | undefined;
+    }>>;
+    serial: z.ZodOptional<z.ZodObject<{
+        path: z.ZodString;
+        rigModel: z.ZodNumber;
+        serialConfig: z.ZodOptional<z.ZodObject<{
+            data_bits: z.ZodOptional<z.ZodEnum<["5", "6", "7", "8"]>>;
+            stop_bits: z.ZodOptional<z.ZodEnum<["1", "2"]>>;
+            serial_parity: z.ZodOptional<z.ZodEnum<["None", "Even", "Odd", "Mark", "Space"]>>;
+            serial_handshake: z.ZodOptional<z.ZodEnum<["None", "Hardware", "Software"]>>;
+            rts_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
+            dtr_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
+            rate: z.ZodOptional<z.ZodNumber>;
+            timeout: z.ZodOptional<z.ZodNumber>;
+            retry: z.ZodOptional<z.ZodNumber>;
+            write_delay: z.ZodOptional<z.ZodNumber>;
+            post_write_delay: z.ZodOptional<z.ZodNumber>;
+        }, "strip", z.ZodTypeAny, {
+            data_bits?: "5" | "6" | "7" | "8" | undefined;
+            stop_bits?: "1" | "2" | undefined;
+            serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+            serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+            rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+            dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+            rate?: number | undefined;
+            timeout?: number | undefined;
+            retry?: number | undefined;
+            write_delay?: number | undefined;
+            post_write_delay?: number | undefined;
+        }, {
+            data_bits?: "5" | "6" | "7" | "8" | undefined;
+            stop_bits?: "1" | "2" | undefined;
+            serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+            serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+            rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+            dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+            rate?: number | undefined;
+            timeout?: number | undefined;
+            retry?: number | undefined;
+            write_delay?: number | undefined;
+            post_write_delay?: number | undefined;
+        }>>;
+        backendConfig: z.ZodOptional<z.ZodRecord<z.ZodString, z.ZodString>>;
+    }, "strip", z.ZodTypeAny, {
+        path: string;
+        rigModel: number;
+        serialConfig?: {
+            data_bits?: "5" | "6" | "7" | "8" | undefined;
+            stop_bits?: "1" | "2" | undefined;
+            serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+            serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+            rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+            dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+            rate?: number | undefined;
+            timeout?: number | undefined;
+            retry?: number | undefined;
+            write_delay?: number | undefined;
+            post_write_delay?: number | undefined;
+        } | undefined;
+        backendConfig?: Record<string, string> | undefined;
+    }, {
+        path: string;
+        rigModel: number;
+        serialConfig?: {
+            data_bits?: "5" | "6" | "7" | "8" | undefined;
+            stop_bits?: "1" | "2" | undefined;
+            serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+            serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+            rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+            dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+            rate?: number | undefined;
+            timeout?: number | undefined;
+            retry?: number | undefined;
+            write_delay?: number | undefined;
+            post_write_delay?: number | undefined;
+        } | undefined;
+        backendConfig?: Record<string, string> | undefined;
+    }>>;
+    spectrum: z.ZodOptional<z.ZodObject<{
+        speed: z.ZodOptional<z.ZodNumber>;
+    }, "strip", z.ZodTypeAny, {
+        speed?: number | undefined;
+    }, {
+        speed?: number | undefined;
+    }>>;
+    transmitCompensationMs: z.ZodOptional<z.ZodNumber>;
+    pttMethod: z.ZodOptional<z.ZodEnum<["cat", "vox", "dtr", "rts"]>>;
+    pttPort: z.ZodOptional<z.ZodString>;
+}, "strip", z.ZodTypeAny, {
+    type: "none" | "network" | "serial" | "icom-wlan";
+    spectrum?: {
+        speed?: number | undefined;
+    } | undefined;
+    network?: {
+        host: string;
+        port: number;
+    } | undefined;
+    serial?: {
+        path: string;
+        rigModel: number;
+        serialConfig?: {
+            data_bits?: "5" | "6" | "7" | "8" | undefined;
+            stop_bits?: "1" | "2" | undefined;
+            serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+            serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+            rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+            dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+            rate?: number | undefined;
+            timeout?: number | undefined;
+            retry?: number | undefined;
+            write_delay?: number | undefined;
+            post_write_delay?: number | undefined;
+        } | undefined;
+        backendConfig?: Record<string, string> | undefined;
+    } | undefined;
+    icomWlan?: {
+        ip: string;
+        port: number;
+        dataMode: boolean;
+        userName?: string | undefined;
+        password?: string | undefined;
+    } | undefined;
+    transmitCompensationMs?: number | undefined;
+    pttMethod?: "cat" | "vox" | "dtr" | "rts" | undefined;
+    pttPort?: string | undefined;
+}, {
+    type: "none" | "network" | "serial" | "icom-wlan";
+    spectrum?: {
+        speed?: number | undefined;
+    } | undefined;
+    network?: {
+        host: string;
+        port: number;
+    } | undefined;
+    serial?: {
+        path: string;
+        rigModel: number;
+        serialConfig?: {
+            data_bits?: "5" | "6" | "7" | "8" | undefined;
+            stop_bits?: "1" | "2" | undefined;
+            serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+            serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+            rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+            dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+            rate?: number | undefined;
+            timeout?: number | undefined;
+            retry?: number | undefined;
+            write_delay?: number | undefined;
+            post_write_delay?: number | undefined;
+        } | undefined;
+        backendConfig?: Record<string, string> | undefined;
+    } | undefined;
+    icomWlan?: {
+        ip: string;
+        port: number;
+        userName?: string | undefined;
+        password?: string | undefined;
+        dataMode?: boolean | undefined;
+    } | undefined;
+    transmitCompensationMs?: number | undefined;
+    pttMethod?: "cat" | "vox" | "dtr" | "rts" | undefined;
+    pttPort?: string | undefined;
+}>;
+/**
+ * 电台配置响应Schema
+ */
+export declare const RadioConfigResponseSchema: z.ZodObject<{
+    success: z.ZodBoolean;
+    config: z.ZodObject<{
+        type: z.ZodEnum<["none", "network", "serial", "icom-wlan"]>;
+        network: z.ZodOptional<z.ZodObject<{
+            host: z.ZodString;
+            port: z.ZodNumber;
+        }, "strip", z.ZodTypeAny, {
+            host: string;
+            port: number;
+        }, {
+            host: string;
+            port: number;
+        }>>;
+        icomWlan: z.ZodOptional<z.ZodObject<{
+            ip: z.ZodString;
+            port: z.ZodNumber;
+            userName: z.ZodOptional<z.ZodString>;
+            password: z.ZodOptional<z.ZodString>;
+            /**
+             * 数据模式（Data Mode）
+             * 启用时使用 USB-D 等数字模式，适用于 FT8/FT4 等数字通信
+             * 默认值: true
+             */
+            dataMode: z.ZodDefault<z.ZodOptional<z.ZodBoolean>>;
+        }, "strip", z.ZodTypeAny, {
+            ip: string;
+            port: number;
+            dataMode: boolean;
+            userName?: string | undefined;
+            password?: string | undefined;
+        }, {
+            ip: string;
+            port: number;
+            userName?: string | undefined;
+            password?: string | undefined;
+            dataMode?: boolean | undefined;
+        }>>;
+        serial: z.ZodOptional<z.ZodObject<{
+            path: z.ZodString;
+            rigModel: z.ZodNumber;
+            serialConfig: z.ZodOptional<z.ZodObject<{
+                data_bits: z.ZodOptional<z.ZodEnum<["5", "6", "7", "8"]>>;
+                stop_bits: z.ZodOptional<z.ZodEnum<["1", "2"]>>;
+                serial_parity: z.ZodOptional<z.ZodEnum<["None", "Even", "Odd", "Mark", "Space"]>>;
+                serial_handshake: z.ZodOptional<z.ZodEnum<["None", "Hardware", "Software"]>>;
+                rts_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
+                dtr_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
+                rate: z.ZodOptional<z.ZodNumber>;
+                timeout: z.ZodOptional<z.ZodNumber>;
+                retry: z.ZodOptional<z.ZodNumber>;
+                write_delay: z.ZodOptional<z.ZodNumber>;
+                post_write_delay: z.ZodOptional<z.ZodNumber>;
+            }, "strip", z.ZodTypeAny, {
+                data_bits?: "5" | "6" | "7" | "8" | undefined;
+                stop_bits?: "1" | "2" | undefined;
+                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+                rate?: number | undefined;
+                timeout?: number | undefined;
+                retry?: number | undefined;
+                write_delay?: number | undefined;
+                post_write_delay?: number | undefined;
+            }, {
+                data_bits?: "5" | "6" | "7" | "8" | undefined;
+                stop_bits?: "1" | "2" | undefined;
+                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+                rate?: number | undefined;
+                timeout?: number | undefined;
+                retry?: number | undefined;
+                write_delay?: number | undefined;
+                post_write_delay?: number | undefined;
+            }>>;
+            backendConfig: z.ZodOptional<z.ZodRecord<z.ZodString, z.ZodString>>;
+        }, "strip", z.ZodTypeAny, {
+            path: string;
+            rigModel: number;
+            serialConfig?: {
+                data_bits?: "5" | "6" | "7" | "8" | undefined;
+                stop_bits?: "1" | "2" | undefined;
+                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+                rate?: number | undefined;
+                timeout?: number | undefined;
+                retry?: number | undefined;
+                write_delay?: number | undefined;
+                post_write_delay?: number | undefined;
+            } | undefined;
+            backendConfig?: Record<string, string> | undefined;
+        }, {
+            path: string;
+            rigModel: number;
+            serialConfig?: {
+                data_bits?: "5" | "6" | "7" | "8" | undefined;
+                stop_bits?: "1" | "2" | undefined;
+                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+                rate?: number | undefined;
+                timeout?: number | undefined;
+                retry?: number | undefined;
+                write_delay?: number | undefined;
+                post_write_delay?: number | undefined;
+            } | undefined;
+            backendConfig?: Record<string, string> | undefined;
+        }>>;
+        spectrum: z.ZodOptional<z.ZodObject<{
+            speed: z.ZodOptional<z.ZodNumber>;
+        }, "strip", z.ZodTypeAny, {
+            speed?: number | undefined;
+        }, {
+            speed?: number | undefined;
+        }>>;
+        transmitCompensationMs: z.ZodOptional<z.ZodNumber>;
+        pttMethod: z.ZodOptional<z.ZodEnum<["cat", "vox", "dtr", "rts"]>>;
+        pttPort: z.ZodOptional<z.ZodString>;
+    }, "strip", z.ZodTypeAny, {
+        type: "none" | "network" | "serial" | "icom-wlan";
+        spectrum?: {
+            speed?: number | undefined;
+        } | undefined;
+        network?: {
+            host: string;
+            port: number;
+        } | undefined;
+        serial?: {
+            path: string;
+            rigModel: number;
+            serialConfig?: {
+                data_bits?: "5" | "6" | "7" | "8" | undefined;
+                stop_bits?: "1" | "2" | undefined;
+                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+                rate?: number | undefined;
+                timeout?: number | undefined;
+                retry?: number | undefined;
+                write_delay?: number | undefined;
+                post_write_delay?: number | undefined;
+            } | undefined;
+            backendConfig?: Record<string, string> | undefined;
+        } | undefined;
+        icomWlan?: {
+            ip: string;
+            port: number;
+            dataMode: boolean;
+            userName?: string | undefined;
+            password?: string | undefined;
+        } | undefined;
+        transmitCompensationMs?: number | undefined;
+        pttMethod?: "cat" | "vox" | "dtr" | "rts" | undefined;
+        pttPort?: string | undefined;
+    }, {
+        type: "none" | "network" | "serial" | "icom-wlan";
+        spectrum?: {
+            speed?: number | undefined;
+        } | undefined;
+        network?: {
+            host: string;
+            port: number;
+        } | undefined;
+        serial?: {
+            path: string;
+            rigModel: number;
+            serialConfig?: {
+                data_bits?: "5" | "6" | "7" | "8" | undefined;
+                stop_bits?: "1" | "2" | undefined;
+                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+                rate?: number | undefined;
+                timeout?: number | undefined;
+                retry?: number | undefined;
+                write_delay?: number | undefined;
+                post_write_delay?: number | undefined;
+            } | undefined;
+            backendConfig?: Record<string, string> | undefined;
+        } | undefined;
+        icomWlan?: {
+            ip: string;
+            port: number;
+            userName?: string | undefined;
+            password?: string | undefined;
+            dataMode?: boolean | undefined;
+        } | undefined;
+        transmitCompensationMs?: number | undefined;
+        pttMethod?: "cat" | "vox" | "dtr" | "rts" | undefined;
+        pttPort?: string | undefined;
+    }>;
+}, "strip", z.ZodTypeAny, {
+    success: boolean;
+    config: {
+        type: "none" | "network" | "serial" | "icom-wlan";
+        spectrum?: {
+            speed?: number | undefined;
+        } | undefined;
+        network?: {
+            host: string;
+            port: number;
+        } | undefined;
+        serial?: {
+            path: string;
+            rigModel: number;
+            serialConfig?: {
+                data_bits?: "5" | "6" | "7" | "8" | undefined;
+                stop_bits?: "1" | "2" | undefined;
+                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+                rate?: number | undefined;
+                timeout?: number | undefined;
+                retry?: number | undefined;
+                write_delay?: number | undefined;
+                post_write_delay?: number | undefined;
+            } | undefined;
+            backendConfig?: Record<string, string> | undefined;
+        } | undefined;
+        icomWlan?: {
+            ip: string;
+            port: number;
+            dataMode: boolean;
+            userName?: string | undefined;
+            password?: string | undefined;
+        } | undefined;
+        transmitCompensationMs?: number | undefined;
+        pttMethod?: "cat" | "vox" | "dtr" | "rts" | undefined;
+        pttPort?: string | undefined;
+    };
+}, {
+    success: boolean;
+    config: {
+        type: "none" | "network" | "serial" | "icom-wlan";
+        spectrum?: {
+            speed?: number | undefined;
+        } | undefined;
+        network?: {
+            host: string;
+            port: number;
+        } | undefined;
+        serial?: {
+            path: string;
+            rigModel: number;
+            serialConfig?: {
+                data_bits?: "5" | "6" | "7" | "8" | undefined;
+                stop_bits?: "1" | "2" | undefined;
+                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
+                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
+                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
+                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
+                rate?: number | undefined;
+                timeout?: number | undefined;
+                retry?: number | undefined;
+                write_delay?: number | undefined;
+                post_write_delay?: number | undefined;
+            } | undefined;
+            backendConfig?: Record<string, string> | undefined;
+        } | undefined;
+        icomWlan?: {
+            ip: string;
+            port: number;
+            userName?: string | undefined;
+            password?: string | undefined;
+            dataMode?: boolean | undefined;
+        } | undefined;
+        transmitCompensationMs?: number | undefined;
+        pttMethod?: "cat" | "vox" | "dtr" | "rts" | undefined;
+        pttPort?: string | undefined;
+    };
+}>;
+/**
+ * 支持的电台型号Schema
+ */
+export declare const SupportedRigSchema: z.ZodObject<{
+    rigModel: z.ZodNumber;
+    mfgName: z.ZodString;
+    modelName: z.ZodString;
+}, "strip", z.ZodTypeAny, {
+    rigModel: number;
+    mfgName: string;
+    modelName: string;
+}, {
+    rigModel: number;
+    mfgName: string;
+    modelName: string;
+}>;
+/**
+ * 支持的电台列表响应Schema
+ */
+export declare const SupportedRigsResponseSchema: z.ZodObject<{
+    rigs: z.ZodArray<z.ZodObject<{
+        rigModel: z.ZodNumber;
+        mfgName: z.ZodString;
+        modelName: z.ZodString;
+    }, "strip", z.ZodTypeAny, {
+        rigModel: number;
+        mfgName: string;
+        modelName: string;
+    }, {
+        rigModel: number;
+        mfgName: string;
+        modelName: string;
+    }>, "many">;
+}, "strip", z.ZodTypeAny, {
+    rigs: {
+        rigModel: number;
+        mfgName: string;
+        modelName: string;
+    }[];
+}, {
+    rigs: {
+        rigModel: number;
+        mfgName: string;
+        modelName: string;
+    }[];
+}>;
+export declare const RigConfigSchemaResponseSchema: z.ZodObject<{
+    rigModel: z.ZodNumber;
+    portType: z.ZodString;
+    endpointKind: z.ZodEnum<["serial-port", "network-address", "device-path"]>;
+    fields: z.ZodArray<z.ZodObject<{
+        token: z.ZodNumber;
+        name: z.ZodString;
+        label: z.ZodString;
+        tooltip: z.ZodString;
+        defaultValue: z.ZodString;
+        effectiveDefaultValue: z.ZodOptional<z.ZodString>;
+        effectiveDefaultSource: z.ZodOptional<z.ZodEnum<["hamlib-schema", "rig-caps"]>>;
+        type: z.ZodEnum<["string", "combo", "numeric", "checkbutton", "button", "binary", "int", "unknown"]>;
+        numeric: z.ZodOptional<z.ZodObject<{
+            min: z.ZodNumber;
+            max: z.ZodNumber;
+            step: z.ZodNumber;
+        }, "strip", z.ZodTypeAny, {
+            min: number;
+            max: number;
+            step: number;
+        }, {
+            min: number;
+            max: number;
+            step: number;
+        }>>;
+        options: z.ZodOptional<z.ZodArray<z.ZodString, "many">>;
+    }, "strip", z.ZodTypeAny, {
+        type: "string" | "unknown" | "combo" | "numeric" | "checkbutton" | "button" | "binary" | "int";
+        name: string;
+        label: string;
+        token: number;
+        tooltip: string;
+        defaultValue: string;
+        options?: string[] | undefined;
+        numeric?: {
+            min: number;
+            max: number;
+            step: number;
+        } | undefined;
+        effectiveDefaultValue?: string | undefined;
+        effectiveDefaultSource?: "hamlib-schema" | "rig-caps" | undefined;
+    }, {
+        type: "string" | "unknown" | "combo" | "numeric" | "checkbutton" | "button" | "binary" | "int";
+        name: string;
+        label: string;
+        token: number;
+        tooltip: string;
+        defaultValue: string;
+        options?: string[] | undefined;
+        numeric?: {
+            min: number;
+            max: number;
+            step: number;
+        } | undefined;
+        effectiveDefaultValue?: string | undefined;
+        effectiveDefaultSource?: "hamlib-schema" | "rig-caps" | undefined;
+    }>, "many">;
+}, "strip", z.ZodTypeAny, {
+    rigModel: number;
+    portType: string;
+    endpointKind: "serial-port" | "network-address" | "device-path";
+    fields: {
+        type: "string" | "unknown" | "combo" | "numeric" | "checkbutton" | "button" | "binary" | "int";
+        name: string;
+        label: string;
+        token: number;
+        tooltip: string;
+        defaultValue: string;
+        options?: string[] | undefined;
+        numeric?: {
+            min: number;
+            max: number;
+            step: number;
+        } | undefined;
+        effectiveDefaultValue?: string | undefined;
+        effectiveDefaultSource?: "hamlib-schema" | "rig-caps" | undefined;
+    }[];
+}, {
+    rigModel: number;
+    portType: string;
+    endpointKind: "serial-port" | "network-address" | "device-path";
+    fields: {
+        type: "string" | "unknown" | "combo" | "numeric" | "checkbutton" | "button" | "binary" | "int";
+        name: string;
+        label: string;
+        token: number;
+        tooltip: string;
+        defaultValue: string;
+        options?: string[] | undefined;
+        numeric?: {
+            min: number;
+            max: number;
+            step: number;
+        } | undefined;
+        effectiveDefaultValue?: string | undefined;
+        effectiveDefaultSource?: "hamlib-schema" | "rig-caps" | undefined;
+    }[];
+}>;
+/**
+ * 电台信息Schema
+ * 用于描述当前连接的电台的详细信息
+ */
+export declare const RadioInfoSchema: z.ZodObject<{
+    /** 制造商名称，如 "Yaesu", "ICOM", "Network" */
+    manufacturer: z.ZodString;
+    /** 型号名称，如 "FT-991A", "IC-705", "RigCtrl" */
+    model: z.ZodString;
+    /** Hamlib 电台型号 ID (serial/network 模式使用，icom-wlan 模式可选) */
+    rigModel: z.ZodOptional<z.ZodNumber>;
+    /** 连接类型 */
+    connectionType: z.ZodEnum<["serial", "network", "icom-wlan"]>;
+    /** 固件版本 (如果可获取) */
+    firmwareVersion: z.ZodOptional<z.ZodString>;
+    /** 序列号 (如果可获取) */
+    serialNumber: z.ZodOptional<z.ZodString>;
+}, "strip", z.ZodTypeAny, {
+    manufacturer: string;
+    model: string;
+    connectionType: "network" | "serial" | "icom-wlan";
+    rigModel?: number | undefined;
+    firmwareVersion?: string | undefined;
+    serialNumber?: string | undefined;
+}, {
+    manufacturer: string;
+    model: string;
+    connectionType: "network" | "serial" | "icom-wlan";
+    rigModel?: number | undefined;
+    firmwareVersion?: string | undefined;
+    serialNumber?: string | undefined;
+}>;
+/**
+ * 串口信息Schema
+ */
+export declare const SerialPortSchema: z.ZodObject<{
+    path: z.ZodString;
+    manufacturer: z.ZodOptional<z.ZodString>;
+    serialNumber: z.ZodOptional<z.ZodString>;
+    pnpId: z.ZodOptional<z.ZodString>;
+    locationId: z.ZodOptional<z.ZodString>;
+    productId: z.ZodOptional<z.ZodString>;
+    vendorId: z.ZodOptional<z.ZodString>;
+}, "strip", z.ZodTypeAny, {
+    path: string;
+    manufacturer?: string | undefined;
+    serialNumber?: string | undefined;
+    pnpId?: string | undefined;
+    locationId?: string | undefined;
+    productId?: string | undefined;
+    vendorId?: string | undefined;
+}, {
+    path: string;
+    manufacturer?: string | undefined;
+    serialNumber?: string | undefined;
+    pnpId?: string | undefined;
+    locationId?: string | undefined;
+    productId?: string | undefined;
+    vendorId?: string | undefined;
+}>;
+/**
+ * 串口列表响应Schema
+ */
+export declare const SerialPortsResponseSchema: z.ZodObject<{
+    ports: z.ZodArray<z.ZodObject<{
+        path: z.ZodString;
+        manufacturer: z.ZodOptional<z.ZodString>;
+        serialNumber: z.ZodOptional<z.ZodString>;
+        pnpId: z.ZodOptional<z.ZodString>;
+        locationId: z.ZodOptional<z.ZodString>;
+        productId: z.ZodOptional<z.ZodString>;
+        vendorId: z.ZodOptional<z.ZodString>;
+    }, "strip", z.ZodTypeAny, {
+        path: string;
+        manufacturer?: string | undefined;
+        serialNumber?: string | undefined;
+        pnpId?: string | undefined;
+        locationId?: string | undefined;
+        productId?: string | undefined;
+        vendorId?: string | undefined;
+    }, {
+        path: string;
+        manufacturer?: string | undefined;
+        serialNumber?: string | undefined;
+        pnpId?: string | undefined;
+        locationId?: string | undefined;
+        productId?: string | undefined;
+        vendorId?: string | undefined;
+    }>, "many">;
+}, "strip", z.ZodTypeAny, {
+    ports: {
+        path: string;
+        manufacturer?: string | undefined;
+        serialNumber?: string | undefined;
+        pnpId?: string | undefined;
+        locationId?: string | undefined;
+        productId?: string | undefined;
+        vendorId?: string | undefined;
+    }[];
+}, {
+    ports: {
+        path: string;
+        manufacturer?: string | undefined;
+        serialNumber?: string | undefined;
+        pnpId?: string | undefined;
+        locationId?: string | undefined;
+        productId?: string | undefined;
+        vendorId?: string | undefined;
+    }[];
+}>;
+/**
+ * 测试响应Schema
+ */
+export declare const TestResponseSchema: z.ZodObject<{
+    success: z.ZodBoolean;
+    message: z.ZodOptional<z.ZodString>;
+}, "strip", z.ZodTypeAny, {
+    success: boolean;
+    message?: string | undefined;
+}, {
+    success: boolean;
+    message?: string | undefined;
+}>;
+/**
+ * 天调能力Schema
+ * 描述电台的天线调谐器功能支持情况
+ */
+export declare const TunerCapabilitiesSchema: z.ZodObject<{
+    /** 是否支持天调功能 */
+    supported: z.ZodBoolean;
+    /** 是否支持开关控制 */
+    hasSwitch: z.ZodBoolean;
+    /** 是否支持手动调谐 */
+    hasManualTune: z.ZodBoolean;
+}, "strip", z.ZodTypeAny, {
+    supported: boolean;
+    hasSwitch: boolean;
+    hasManualTune: boolean;
+}, {
+    supported: boolean;
+    hasSwitch: boolean;
+    hasManualTune: boolean;
+}>;
+/**
+ * 天调状态Schema
+ * 描述天线调谐器的当前状态
+ */
+export declare const TunerStatusSchema: z.ZodObject<{
+    /** 天调是否已启用 */
+    enabled: z.ZodBoolean;
+    /** 是否正在调谐中 */
+    active: z.ZodBoolean;
+    /** 驻波比 (SWR) 值 */
+    swr: z.ZodOptional<z.ZodNumber>;
+    /** 调谐状态 */
+    status: z.ZodOptional<z.ZodEnum<["idle", "tuning", "success", "failed"]>>;
+}, "strip", z.ZodTypeAny, {
+    enabled: boolean;
+    active: boolean;
+    status?: "success" | "idle" | "tuning" | "failed" | undefined;
+    swr?: number | undefined;
+}, {
+    enabled: boolean;
+    active: boolean;
+    status?: "success" | "idle" | "tuning" | "failed" | undefined;
+    swr?: number | undefined;
+}>;
+/**
+ * 天调能力响应Schema
+ */
+export declare const TunerCapabilitiesResponseSchema: z.ZodObject<{
+    success: z.ZodBoolean;
+    capabilities: z.ZodObject<{
+        /** 是否支持天调功能 */
+        supported: z.ZodBoolean;
+        /** 是否支持开关控制 */
+        hasSwitch: z.ZodBoolean;
+        /** 是否支持手动调谐 */
+        hasManualTune: z.ZodBoolean;
+    }, "strip", z.ZodTypeAny, {
+        supported: boolean;
+        hasSwitch: boolean;
+        hasManualTune: boolean;
+    }, {
+        supported: boolean;
+        hasSwitch: boolean;
+        hasManualTune: boolean;
+    }>;
+}, "strip", z.ZodTypeAny, {
+    success: boolean;
+    capabilities: {
+        supported: boolean;
+        hasSwitch: boolean;
+        hasManualTune: boolean;
+    };
+}, {
+    success: boolean;
+    capabilities: {
+        supported: boolean;
+        hasSwitch: boolean;
+        hasManualTune: boolean;
+    };
+}>;
+/**
+ * 天调状态响应Schema
+ */
+export declare const TunerStatusResponseSchema: z.ZodObject<{
+    success: z.ZodBoolean;
+    status: z.ZodObject<{
+        /** 天调是否已启用 */
+        enabled: z.ZodBoolean;
+        /** 是否正在调谐中 */
+        active: z.ZodBoolean;
+        /** 驻波比 (SWR) 值 */
+        swr: z.ZodOptional<z.ZodNumber>;
+        /** 调谐状态 */
+        status: z.ZodOptional<z.ZodEnum<["idle", "tuning", "success", "failed"]>>;
+    }, "strip", z.ZodTypeAny, {
+        enabled: boolean;
+        active: boolean;
+        status?: "success" | "idle" | "tuning" | "failed" | undefined;
+        swr?: number | undefined;
+    }, {
+        enabled: boolean;
+        active: boolean;
+        status?: "success" | "idle" | "tuning" | "failed" | undefined;
+        swr?: number | undefined;
+    }>;
+}, "strip", z.ZodTypeAny, {
+    status: {
+        enabled: boolean;
+        active: boolean;
+        status?: "success" | "idle" | "tuning" | "failed" | undefined;
+        swr?: number | undefined;
+    };
+    success: boolean;
+}, {
+    status: {
+        enabled: boolean;
+        active: boolean;
+        status?: "success" | "idle" | "tuning" | "failed" | undefined;
+        swr?: number | undefined;
+    };
+    success: boolean;
+}>;
+/**
+ * 电台连接状态枚举
+ * 精细化的连接状态，贯穿 server → contracts → web
+ */
+export declare enum RadioConnectionStatus {
+    /** 未配置电台 (type=none) */
+    NOT_CONFIGURED = "not_configured",
+    /** 已断开 (type!=none, 但未连接/初始状态) */
+    DISCONNECTED = "disconnected",
+    /** 连接中 */
+    CONNECTING = "connecting",
+    /** 已连接 */
+    CONNECTED = "connected",
+    /** 自动重连中（运行中断线后自动重连） */
+    RECONNECTING = "reconnecting",
+    /** 连接丢失（重连耗尽或运行中断连后停止重连） */
+    CONNECTION_LOST = "connection_lost"
+}
+/**
+ * 重连进度信息
+ */
+export declare const ReconnectProgressSchema: z.ZodObject<{
+    attempt: z.ZodNumber;
+    maxAttempts: z.ZodNumber;
+    nextRetryMs: z.ZodOptional<z.ZodNumber>;
+}, "strip", z.ZodTypeAny, {
+    attempt: number;
+    maxAttempts: number;
+    nextRetryMs?: number | undefined;
+}, {
+    attempt: number;
+    maxAttempts: number;
+    nextRetryMs?: number | undefined;
+}>;
+export type ReconnectProgress = z.infer<typeof ReconnectProgressSchema>;
+export declare const RadioConnectionStatusSchema: z.ZodNativeEnum<typeof RadioConnectionStatus>;
+/**
+ * 核心电台能力
+ * 用于描述主流程是否仍可继续使用某项核心读写能力。
+ *
+ * 语义：
+ * - true: 当前连接仍可继续尝试该能力（已确认支持，或尚未确认不支持）
+ * - false: 已明确确认当前电台/连接不支持该能力，后续不再重复访问底层
+ */
+export declare const CoreRadioCapabilitiesSchema: z.ZodObject<{
+    readFrequency: z.ZodBoolean;
+    writeFrequency: z.ZodBoolean;
+    readRadioMode: z.ZodBoolean;
+    writeRadioMode: z.ZodBoolean;
+}, "strip", z.ZodTypeAny, {
+    readFrequency: boolean;
+    writeFrequency: boolean;
+    readRadioMode: boolean;
+    writeRadioMode: boolean;
+}, {
+    readFrequency: boolean;
+    writeFrequency: boolean;
+    readRadioMode: boolean;
+    writeRadioMode: boolean;
+}>;
+export declare const CoreCapabilityDiagnosticSchema: z.ZodObject<{
+    capability: z.ZodEnum<["readFrequency", "writeFrequency", "readRadioMode", "writeRadioMode"]>;
+    message: z.ZodString;
+    stack: z.ZodString;
+    recordedAt: z.ZodNumber;
+}, "strip", z.ZodTypeAny, {
+    message: string;
+    capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+    stack: string;
+    recordedAt: number;
+}, {
+    message: string;
+    capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+    stack: string;
+    recordedAt: number;
+}>;
+export declare const CoreCapabilityDiagnosticsSchema: z.ZodObject<{
+    readFrequency: z.ZodOptional<z.ZodObject<{
+        capability: z.ZodEnum<["readFrequency", "writeFrequency", "readRadioMode", "writeRadioMode"]>;
+        message: z.ZodString;
+        stack: z.ZodString;
+        recordedAt: z.ZodNumber;
+    }, "strip", z.ZodTypeAny, {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    }, {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    }>>;
+    writeFrequency: z.ZodOptional<z.ZodObject<{
+        capability: z.ZodEnum<["readFrequency", "writeFrequency", "readRadioMode", "writeRadioMode"]>;
+        message: z.ZodString;
+        stack: z.ZodString;
+        recordedAt: z.ZodNumber;
+    }, "strip", z.ZodTypeAny, {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    }, {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    }>>;
+    readRadioMode: z.ZodOptional<z.ZodObject<{
+        capability: z.ZodEnum<["readFrequency", "writeFrequency", "readRadioMode", "writeRadioMode"]>;
+        message: z.ZodString;
+        stack: z.ZodString;
+        recordedAt: z.ZodNumber;
+    }, "strip", z.ZodTypeAny, {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    }, {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    }>>;
+    writeRadioMode: z.ZodOptional<z.ZodObject<{
+        capability: z.ZodEnum<["readFrequency", "writeFrequency", "readRadioMode", "writeRadioMode"]>;
+        message: z.ZodString;
+        stack: z.ZodString;
+        recordedAt: z.ZodNumber;
+    }, "strip", z.ZodTypeAny, {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    }, {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    }>>;
+}, "strip", z.ZodTypeAny, {
+    readFrequency?: {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    } | undefined;
+    writeFrequency?: {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    } | undefined;
+    readRadioMode?: {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    } | undefined;
+    writeRadioMode?: {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    } | undefined;
+}, {
+    readFrequency?: {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    } | undefined;
+    writeFrequency?: {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    } | undefined;
+    readRadioMode?: {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    } | undefined;
+    writeRadioMode?: {
+        message: string;
+        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
+        stack: string;
+        recordedAt: number;
+    } | undefined;
+}>;
+/**
+ * 自定义频率预设设置Schema
+ */
+export declare const CustomFrequencyPresetsSchema: z.ZodObject<{
+    presets: z.ZodArray<z.ZodObject<{
+        band: z.ZodString;
+        mode: z.ZodString;
+        radioMode: z.ZodOptional<z.ZodString>;
+        frequency: z.ZodNumber;
+        description: z.ZodOptional<z.ZodString>;
+    }, "strip", z.ZodTypeAny, {
+        mode: string;
+        frequency: number;
+        band: string;
+        radioMode?: string | undefined;
+        description?: string | undefined;
+    }, {
+        mode: string;
+        frequency: number;
+        band: string;
+        radioMode?: string | undefined;
+        description?: string | undefined;
+    }>, "many">;
+}, "strip", z.ZodTypeAny, {
+    presets: {
+        mode: string;
+        frequency: number;
+        band: string;
+        radioMode?: string | undefined;
+        description?: string | undefined;
+    }[];
+}, {
+    presets: {
+        mode: string;
+        frequency: number;
+        band: string;
+        radioMode?: string | undefined;
+        description?: string | undefined;
+    }[];
+}>;
+export type CustomFrequencyPresets = z.infer<typeof CustomFrequencyPresetsSchema>;
+export type PresetFrequency = z.infer<typeof PresetFrequencySchema>;
+export type FrequencyListResponse = z.infer<typeof FrequencyListResponseSchema>;
+export type SerialConfig = z.infer<typeof SerialConfigSchema>;
+export type HamlibBackendConfig = z.infer<typeof HamlibBackendConfigSchema>;
+export type HamlibConfigFieldType = z.infer<typeof HamlibConfigFieldTypeSchema>;
+export type HamlibConfigField = z.infer<typeof HamlibConfigFieldSchema>;
+export type NetworkConfig = z.infer<typeof NetworkConfigSchema>;
+export type IcomWlanConfig = z.infer<typeof IcomWlanConfigSchema>;
+export type SerialConnectionConfig = z.infer<typeof SerialConnectionConfigSchema>;
+export type HamlibSpectrumConfig = z.infer<typeof HamlibSpectrumConfigSchema>;
+export type PttMethod = z.infer<typeof PttMethodSchema>;
+export type HamlibConfig = z.infer<typeof HamlibConfigSchema>;
+export type RadioConfigResponse = z.infer<typeof RadioConfigResponseSchema>;
+export type SupportedRig = z.infer<typeof SupportedRigSchema>;
+export type SupportedRigsResponse = z.infer<typeof SupportedRigsResponseSchema>;
+export type RigConfigSchemaResponse = z.infer<typeof RigConfigSchemaResponseSchema>;
+export type RadioInfo = z.infer<typeof RadioInfoSchema>;
+export type SerialPort = z.infer<typeof SerialPortSchema>;
+export type SerialPortsResponse = z.infer<typeof SerialPortsResponseSchema>;
+export type TestResponse = z.infer<typeof TestResponseSchema>;
+export type TunerCapabilities = z.infer<typeof TunerCapabilitiesSchema>;
+export type TunerStatus = z.infer<typeof TunerStatusSchema>;
+export type TunerCapabilitiesResponse = z.infer<typeof TunerCapabilitiesResponseSchema>;
+export type TunerStatusResponse = z.infer<typeof TunerStatusResponseSchema>;
+export type CoreRadioCapabilities = z.infer<typeof CoreRadioCapabilitiesSchema>;
+export type CoreCapabilityDiagnostic = z.infer<typeof CoreCapabilityDiagnosticSchema>;
+export type CoreCapabilityDiagnostics = z.infer<typeof CoreCapabilityDiagnosticsSchema>;
+//# sourceMappingURL=radio.schema.d.ts.map