@twin.org/identity-cli 0.0.1-next.19 → 0.0.1-next.22

package/dist/locales/en.json

@@ -195,9 +195,16 @@
       "noKeyOrSigner": "No key or signer was provided for JWT creation",
       "noKeyOrVerifier": "No key or verifier was provided for JWT creation"
     },
+    "jwtHelper": {
+      "jwtDecodeFailed": "Decoding the JWT failed",
+      "jwtPayloadMissingParam": "The JWT is missing the required parameter \"{param}\""
+    },
+    "iotaIdentityResolverConnector": {
+      "documentNotFound": "The document could not be found",
+      "resolveDocumentFailed": "Resolving the document failed"
+    },
     "iotaIdentityConnector": {
       "createDocumentFailed": "Creating the document failed",
-      "resolveDocumentFailed": "Resolving the document failed",
       "missingDid": "The full id including DID is required",
       "addVerificationMethodFailed": "Adding the verification method failed",
       "removeVerificationMethodFailed": "Removing the verification method failed",
@@ -230,6 +237,45 @@
       "inclusionFailed": "The transaction generated was not included in a reasonable amount of time",
       "insufficientFunds": "There were insufficient funds to complete the operation"
     },
+    "iotaRebasedIdentityResolverConnector": {
+      "documentNotFound": "The document could not be found",
+      "resolveDocumentFailed": "Resolving the document failed"
+    },
+    "iotaRebasedIdentityConnector": {
+      "createDocumentFailed": "Creating the document failed",
+      "missingDid": "The full id including DID is required",
+      "addVerificationMethodFailed": "Adding the verification method failed",
+      "removeVerificationMethodFailed": "Removing the verification method failed",
+      "addServiceFailed": "Adding the service failed",
+      "removeServiceFailed": "Removing the service failed",
+      "documentNotFound": "The document could not be found",
+      "stateControllerMissing": "The state controller address is missing from the metadata",
+      "verificationMethodNotFound": "The verification method could not be found",
+      "serviceNotFound": "The service could not be found",
+      "publicKeyJwkMissing": "The verification method contains no publicKeyJwk in method \"{method}\"",
+      "verificationKeyMissing": "The verification key is missing from the vault for method \"{method}\"",
+      "createVerifiableCredentialFailed": "Creating the verifiable credential failed",
+      "checkingVerifiableCredentialFailed": "Checking the verifiable credential failed",
+      "createVerifiablePresentationFailed": "Creating the verifiable presentation failed",
+      "checkingVerifiablePresentationFailed": "Checking the verifiable presentation failed",
+      "expectingJwtCredential": "Expecting JWT credential in the presentation",
+      "keyIndexOutOfRange": "The supplied keyIndex is not in the range of the key list",
+      "createProofFailed": "Creating the signature for the data failed",
+      "methodMissing": "The verification method specified does not exist \"{method}\"",
+      "verifyProofFailed": "Verifying the signature for the data failed",
+      "revokeVerifiableCredentialsFailed": "Revoking verifiable credentials failed",
+      "unrevokeVerifiableCredentialsFailed": "Unrevoking verifiable credentials failed",
+      "inclusionFailed": "The transaction generated for the identity was not included in a reasonable amount of time",
+      "insufficientFunds": "There were insufficient funds to complete the operation",
+      "walletConnectorMissing": "The wallet connector must be available to perform this operation",
+      "proofType": "The proof type must be DataIntegrityProof, it is currently {proofType}",
+      "cryptosuite": "The proof cryptosuite must be eddsa-jcs-2022, it is currently {cryptosuite}"
+    },
+    "iotaRebased": {
+      "insufficientFunds": "There were insufficient funds to complete the operation",
+      "packageNotFoundOnNetwork": "The package \"{packageId}\" was not found on the network",
+      "packageObjectError": "Failed to fetch the package object \"{packageId}\""
+    },
     "entityStorageVaultConnector": {
       "keyAlreadyExists": "The key \"{existingId}\" already exists in the vault",
       "keyNotFound": "The key \"{notFoundId}\" was not found in the vault",
@@ -245,6 +291,12 @@
     "iotaFaucetConnector": {
       "fundingFailed": "Fund the address from faucet failed",
       "insufficientFunds": "There were insufficient funds to complete the operation"
+    },
+    "iotaRebasedWalletConnector": {
+      "transferFailed": "The wallet transfer failed."
+    },
+    "iotaRebasedFaucetConnector": {
+      "fundingFailed": "Fund the address from faucet failed"
     }
   },
   "errorNames": {
@@ -345,8 +397,8 @@
       }
     },
     "address": {
-      "summary": "Create bech32 addresses and keys from the seed.",
-      "description": "Create a number of bech32 addresses and their associated key pairs from the seed.",
+      "summary": "Create addresses and keys from the seed.",
+      "description": "Create a number of addresses and their associated key pairs from the seed.",
       "options": {
         "seed": {
           "param": "--seed '<'seed'>'",
@@ -362,15 +414,15 @@
         },
         "account": {
           "param": "--account '<'number'>'",
-          "description": "The account used to generate the bech32 addresses."
+          "description": "The account used to generate the addresses."
         },
         "hrp": {
           "param": "--hrp '<'hrp'>'",
-          "description": "The human readable part of the bech32 addresses."
+          "description": "The human readable part for the addresses if generating bech32 format."
         },
         "coin": {
           "param": "--coin '<'coin'>'",
-          "description": "The coin type used to generate the bech32 addresses."
+          "description": "The coin type used to generate the addresses."
         },
         "key-type": {
           "param": "--key-type '<'type'>'",
@@ -405,7 +457,7 @@
       "options": {
         "address": {
           "param": "--address '<'address'>'",
-          "description": "The address to fill from the faucet either in bech32 format, or start with ! to read environment variable."
+          "description": "The address to fill from the faucet either bech32 or hex format, or start with ! to read environment variable."
         },
         "faucet": {
           "param": "--faucet '<'url'>'",
@@ -449,15 +501,24 @@
         "transferringFunds": "Transferring"
       },
       "labels": {
-        "destAddress": "Destination Address"
+        "destAddress": "Destination Address",
+        "amount": "Amount"
       }
     },
     "common": {
       "options": {
+        "connector": {
+          "param": "--connector '<'connector'>'",
+          "description": "The connector to use for the identity operation."
+        },
         "node": {
           "param": "--node '<'url'>'",
           "description": "The url for the node endpoint, or an environment variable name containing the url."
         },
+        "network": {
+          "param": "--network '<'network'>'",
+          "description": "The network to use for the identity operation."
+        },
         "explorer": {
           "param": "--explorer '<'url'>'",
           "description": "The url for the explorer endpoint, or an environment variable name containing the url."
@@ -469,6 +530,8 @@
         "node": "Node",
         "explorer": "Explorer",
         "explore": "Explore",
+        "connector": "Connector",
+        "network": "Network",
         "did": "DID"
       }
     },
@@ -479,13 +542,18 @@
         "seed": {
           "param": "--seed '<'seed'>'",
           "description": "The seed for the controller address in hex or base64 used to create the DID, or start with ! to read environment variable."
+        },
+        "addressIndex": {
+          "param": "--address-index '<'index'>'",
+          "description": "The address index to use for the creation."
         }
       },
       "progress": {
         "creatingIdentity": "Creating identity"
       },
       "labels": {
-        "identity": "Identity"
+        "identity": "Identity",
+        "addressIndex": "Address Index"
       }
     },
     "identity-resolve": {
@@ -781,11 +849,6 @@
   "errorMessages": {
     "fetch": "Fetch"
   },
-  "identityRole": {
-    "organization": "Organization",
-    "user": "User",
-    "node": "Node"
-  },
   "verifiableCredentialStates": {
     "pendingVerification": "Pending Verification",
     "rejected": "Rejected",

package/dist/types/commands/identityCreate.d.ts

@@ -1,5 +1,6 @@
 import { type CliOutputOptions } from "@twin.org/cli-core";
 import { Command } from "commander";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Build the identity create command for the CLI.
  * @returns The command.
@@ -9,11 +10,16 @@ export declare function buildCommandIdentityCreate(): Command;
  * Action the identity create command.
  * @param opts The options for the command.
  * @param opts.seed The private key for the controller.
+ * @param opts.connector The connector to perform the operations with.
  * @param opts.node The node URL.
+ * @param opts.network The network to use for rebased connector.
  * @param opts.explorer The explorer URL.
  */
 export declare function actionCommandIdentityCreate(opts: {
     seed: string;
+    connector?: IdentityConnectorTypes;
     node: string;
+    network?: string;
     explorer: string;
+    addressIndex?: string;
 } & CliOutputOptions): Promise<void>;

package/dist/types/commands/identityResolve.d.ts

@@ -1,5 +1,6 @@
 import { type CliOutputOptions } from "@twin.org/cli-core";
 import { Command } from "commander";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Build the identity resolve command for the CLI.
  * @returns The command.
@@ -9,11 +10,15 @@ export declare function buildCommandIdentityResolve(): Command;
  * Action the identity resolve command.
  * @param opts The options for the command.
  * @param opts.did The identity to resolve.
+ * @param opts.connector The connector to perform the operations with.
  * @param opts.node The node URL.
+ * @param opts.network The network to use for rebased connector.
  * @param opts.explorer The explorer URL.
  */
 export declare function actionCommandIdentityResolve(opts: {
     did: string;
+    connector?: IdentityConnectorTypes;
     node: string;
+    network?: string;
     explorer: string;
 } & CliOutputOptions): Promise<void>;

package/dist/types/commands/proofCreate.d.ts

@@ -1,5 +1,6 @@
 import { type CliOutputOptions } from "@twin.org/cli-core";
 import { Command } from "commander";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Build the proof create command for the CLI.
  * @returns The command.
@@ -11,11 +12,15 @@ export declare function buildCommandProofCreate(): Command;
  * @param opts.id The id of the verification method to use for the credential.
  * @param opts.privateKey The private key for the verification method.
  * @param opts.data The data to create the proof for.
+ * @param opts.connector The connector to perform the operations with.
  * @param opts.node The node URL.
+ * @param opts.network The network to use for rebased connector.
  */
 export declare function actionCommandProofCreate(opts: {
     id: string;
     privateKey: string;
     data: string;
+    connector?: IdentityConnectorTypes;
     node: string;
+    network?: string;
 } & CliOutputOptions): Promise<void>;

package/dist/types/commands/proofVerify.d.ts

@@ -1,5 +1,6 @@
 import { type CliOutputOptions } from "@twin.org/cli-core";
 import { Command } from "commander";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Build the proof verify command for the CLI.
  * @returns The command.
@@ -12,12 +13,16 @@ export declare function buildCommandProofVerify(): Command;
  * @param opts.data The data to verify the proof for.
  * @param opts.cryptosuite The cryptosuite of the proof.
  * @param opts.value The proof value.
+ * @param opts.connector The connector to perform the operations with.
  * @param opts.node The node URL.
+ * @param opts.network The network to use for rebased connector.
  */
 export declare function actionCommandProofVerify(opts: {
     id: string;
     data: string;
     cryptosuite: string;
     value: string;
+    connector?: IdentityConnectorTypes;
     node: string;
+    network?: string;
 } & CliOutputOptions): Promise<void>;

package/dist/types/commands/serviceAdd.d.ts

@@ -1,5 +1,6 @@
 import { type CliOutputOptions } from "@twin.org/cli-core";
 import { Command } from "commander";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Build the service add command for the CLI.
  * @returns The command.
@@ -13,6 +14,7 @@ export declare function buildCommandServiceAdd(): Command;
  * @param opts.id The id of the service to add.
  * @param opts.type The type of the service to add.
  * @param opts.endpoint The service endpoint.
+ * @param opts.connector The connector to perform the operations with.
  * @param opts.node The node URL.
  * @param opts.explorer The explorer URL.
  */
@@ -22,6 +24,8 @@ export declare function actionCommandServiceAdd(opts: {
     id: string;
     type: string;
     endpoint: string;
+    connector?: IdentityConnectorTypes;
     node: string;
+    network?: string;
     explorer: string;
 } & CliOutputOptions): Promise<void>;

package/dist/types/commands/serviceRemove.d.ts

@@ -1,4 +1,5 @@
 import { Command } from "commander";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Build the service remove command for the CLI.
  * @returns The command.
@@ -9,12 +10,16 @@ export declare function buildCommandServiceRemove(): Command;
  * @param opts The options for the command.
  * @param opts.seed The private key for the controller.
  * @param opts.id The id of the service to remove.
+ * @param opts.connector The connector to perform the operations with.
  * @param opts.node The node URL.
+ * @param opts.network The network to use for rebased connector.
  * @param opts.explorer The explorer URL.
  */
 export declare function actionCommandServiceRemove(opts: {
     seed: string;
     id: string;
+    connector?: IdentityConnectorTypes;
     node: string;
+    network?: string;
     explorer: string;
 }): Promise<void>;

package/dist/types/commands/setupCommands.d.ts

@@ -1,4 +1,22 @@
+import type { IIdentityConnector } from "@twin.org/identity-models";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Setup the vault for use in the CLI commands.
  */
 export declare function setupVault(): void;
+/**
+ * Setup the identity connector for use in the CLI commands.
+ * @param options The options for the identity connector.
+ * @param options.nodeEndpoint The node endpoint.
+ * @param options.network The network.
+ * @param options.addressIndex The wallet index.
+ * @param options.vaultSeedId The vault seed ID.
+ * @param connector The connector to use.
+ * @returns The identity connector.
+ */
+export declare function setupIdentityConnector(options: {
+    nodeEndpoint: string;
+    network?: string;
+    addressIndex?: number;
+    vaultSeedId?: string;
+}, connector?: IdentityConnectorTypes): IIdentityConnector;

package/dist/types/commands/verifiableCredentialCreate.d.ts

@@ -1,5 +1,6 @@
 import { type CliOutputOptions } from "@twin.org/cli-core";
 import { Command } from "commander";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Build the verifiable credential create command for the CLI.
  * @returns The command.
@@ -13,6 +14,7 @@ export declare function buildCommandVerifiableCredentialCreate(): Command;
  * @param opts.credentialId The id of the credential.
  * @param opts.subjectJson The JSON data for the subject.
  * @param opts.revocationIndex The revocation index for the credential.
+ * @param opts.connector The connector to perform the operations with.
  * @param opts.node The node URL.
  */
 export declare function actionCommandVerifiableCredentialCreate(opts: {
@@ -21,5 +23,7 @@ export declare function actionCommandVerifiableCredentialCreate(opts: {
     credentialId?: string;
     subjectJson: string;
     revocationIndex?: string;
+    connector?: IdentityConnectorTypes;
     node: string;
+    network?: string;
 } & CliOutputOptions): Promise<void>;

package/dist/types/commands/verifiableCredentialRevoke.d.ts

@@ -1,4 +1,5 @@
 import { Command } from "commander";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Build the verifiable credential revoke command for the CLI.
  * @returns The command.
@@ -10,11 +11,15 @@ export declare function buildCommandVerifiableCredentialRevoke(): Command;
  * @param opts.seed The seed to generate the private key for the controller.
  * @param opts.did The id of the document to revoke the index.
  * @param opts.revocationIndex The revocation index for the credential.
+ * @param opts.connector The connector to perform the operations with.
  * @param opts.node The node URL.
+ * @param opts.network The network to use for rebased connector.
  */
 export declare function actionCommandVerifiableCredentialRevoke(opts: {
     seed: string;
     did: string;
     revocationIndex: string;
+    connector?: IdentityConnectorTypes;
     node: string;
+    network?: string;
 }): Promise<void>;

package/dist/types/commands/verifiableCredentialUnrevoke.d.ts

@@ -1,4 +1,5 @@
 import { Command } from "commander";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Build the verifiable credential unrevoke command for the CLI.
  * @returns The command.
@@ -10,11 +11,15 @@ export declare function buildCommandVerifiableCredentialUnrevoke(): Command;
  * @param opts.seed The seed to generate the private key for the controller.
  * @param opts.did The id of the document to unrevoke the index.
  * @param opts.revocationIndex The revocation index for the credential.
+ * @param opts.connector The connector to perform the operations with.
  * @param opts.node The node URL.
+ * @param opts.network The network to use for rebased connector.
  */
 export declare function actionCommandVerifiableCredentialUnrevoke(opts: {
     seed: string;
     did: string;
     revocationIndex: string;
+    connector?: IdentityConnectorTypes;
     node: string;
+    network?: string;
 }): Promise<void>;

package/dist/types/commands/verifiableCredentialVerify.d.ts

@@ -1,5 +1,6 @@
 import { type CliOutputOptions } from "@twin.org/cli-core";
 import { Command } from "commander";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Build the verifiable credential verify command for the CLI.
  * @returns The command.
@@ -9,9 +10,12 @@ export declare function buildCommandVerifiableCredentialVerify(): Command;
  * Action the verifiable credential verify command.
  * @param opts The options for the command.
  * @param opts.jwt The JSON web token for the verifiable credential.
+ * @param opts.connector The connector to perform the operations with.
  * @param opts.node The node URL.
  */
 export declare function actionCommandVerifiableCredentialVerify(opts: {
     jwt: string;
+    connector?: IdentityConnectorTypes;
     node: string;
+    network?: string;
 } & CliOutputOptions): Promise<void>;

package/dist/types/commands/verificationMethodAdd.d.ts

@@ -1,6 +1,7 @@
 import { type CliOutputOptions } from "@twin.org/cli-core";
 import { DidVerificationMethodType } from "@twin.org/standards-w3c-did";
 import { Command } from "commander";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Build the verification method add command for the CLI.
  * @returns The command.
@@ -13,6 +14,7 @@ export declare function buildCommandVerificationMethodAdd(): Command;
  * @param opts.did The identity of the document to add to.
  * @param opts.type The type of the verification method to add.
  * @param opts.id The id of the verification method to add.
+ * @param opts.connector The connector to perform the operations with.
  * @param opts.node The node URL.
  * @param opts.explorer The explorer URL.
  */
@@ -21,6 +23,8 @@ export declare function actionCommandVerificationMethodAdd(opts: {
     did: string;
     type: DidVerificationMethodType;
     id?: string;
+    connector?: IdentityConnectorTypes;
     node: string;
+    network?: string;
     explorer: string;
 } & CliOutputOptions): Promise<void>;

package/dist/types/commands/verificationMethodRemove.d.ts

@@ -1,4 +1,5 @@
 import { Command } from "commander";
+import { IdentityConnectorTypes } from "../models/identityConnectorTypes";
 /**
  * Build the verification method remove command for the CLI.
  * @returns The command.
@@ -9,12 +10,16 @@ export declare function buildCommandVerificationMethodRemove(): Command;
  * @param opts The options for the command.
  * @param opts.seed The private key for the controller.
  * @param opts.id The id of the verification method to remove.
+ * @param opts.connector The connector to perform the operations with.
  * @param opts.node The node URL.
  * @param opts.explorer The explorer URL.
+ * @param opts.network The network to use for rebased connector.
  */
 export declare function actionCommandVerificationMethodRemove(opts: {
     seed: string;
     id: string;
+    connector?: IdentityConnectorTypes;
     node: string;
+    network?: string;
     explorer: string;
 }): Promise<void>;

package/dist/types/index.d.ts

@@ -5,9 +5,11 @@ export * from "./commands/proofCreate";
 export * from "./commands/proofVerify";
 export * from "./commands/serviceAdd";
 export * from "./commands/serviceRemove";
+export * from "./commands/setupCommands";
 export * from "./commands/verifiableCredentialCreate";
 export * from "./commands/verifiableCredentialRevoke";
 export * from "./commands/verifiableCredentialUnrevoke";
 export * from "./commands/verifiableCredentialVerify";
 export * from "./commands/verificationMethodAdd";
 export * from "./commands/verificationMethodRemove";
+export * from "./models/identityConnectorTypes";

package/dist/types/models/identityConnectorTypes.d.ts

@@ -0,0 +1,17 @@
+/**
+ * The identity connector types.
+ */
+export declare const IdentityConnectorTypes: {
+    /**
+     * IOTA.
+     */
+    readonly Iota: "iota";
+    /**
+     * IOTA Rebased.
+     */
+    readonly IotaRebased: "iota-rebased";
+};
+/**
+ * The identity connector types.
+ */
+export type IdentityConnectorTypes = (typeof IdentityConnectorTypes)[keyof typeof IdentityConnectorTypes];

package/docs/changelog.md

@@ -1,5 +1,5 @@
 # @twin.org/identity-cli - Changelog
 
-## v0.0.1-next.19
+## v0.0.1-next.22
 
 - Initial Release

package/docs/examples.md

@@ -64,7 +64,7 @@ Creates a Decentralized Identifier (DID).
 
 Options:
   --seed <seed>              The seed for the controller address in hex or base64 used to create the DID, or start with ! to read environment variable.
-  --controller <controller>  The address which controls the identity in bech32 format, or start with ! to read environment variable.
+  --address-index <index>    The address index to use for the creation. (default: "0")
   --no-console               Hides the output in the console.
   --json <filename>          Creates a JSON file containing the output.
   --merge-json               If the JSON file already exists merge the data instead of overwriting.
@@ -81,7 +81,7 @@ The commands `mnemonic`, `address`, `faucet` and `transfer` are described in mor
 
 ### identity-create
 
-Use this command to create a new DID, the controller address must have sufficient funds to store the identity. The seed and the funds can be generated using the `mnemonic` and `faucet` commands.
+Use this command to create a new DID, the wallet address must have sufficient funds to store the identity. The seed and the funds can be generated using the `mnemonic` and `faucet` commands.
 
 ```shell
 # Generate a seed and mnemonic and store it in the env file
@@ -101,10 +101,10 @@ EXPLORER_URL="https://explorer.iota.org/iota-testnet/"
 To then request some funds and generate the identity you can issue the following commands:
 
 ```shell
-# Fund the controller address from the faucet loading the config and wallet env files
-twin-identity faucet --load-env config.env wallet.env --address !ADDRESS_0_BECH32
+# Fund the wallet address from the faucet loading the config and wallet env files
+twin-identity faucet --load-env config.env wallet.env --address !ADDRESS_0
 # Create an identity
-twin-identity identity-create --load-env config.env wallet.env --seed !SEED --controller !ADDRESS_0_BECH32 --env identity.env
+twin-identity identity-create --load-env config.env wallet.env --seed !SEED --env identity.env
 ```
 
 ### identity-resolve

package/docs/reference/classes/CLI.md

@@ -30,19 +30,25 @@ Run the app.
 
 #### Parameters
 
-• **argv**: `string`[]
+##### argv
+
+`string`[]
 
 The process arguments.
 
-• **localesDirectory?**: `string`
+##### localesDirectory?
+
+`string`
 
 The directory for the locales, default to relative to the script.
 
-• **options?**
+##### options?
 
 Additional options for the CLI.
 
-• **options.overrideOutputWidth?**: `number`
+###### overrideOutputWidth
+
+`number`
 
 The override output width.
 

package/docs/reference/functions/actionCommandIdentityCreate.md

@@ -6,7 +6,9 @@ Action the identity create command.
 
 ## Parameters
 
-• **opts**: `object` & `ICliOutputOptionsConsole` & `ICliOutputOptionsEnv` & `ICliOutputOptionsJson`
+### opts
+
+`object` & `ICliOutputOptionsConsole` & `ICliOutputOptionsEnv` & `ICliOutputOptionsJson`
 
 The options for the command.
 

package/docs/reference/functions/actionCommandIdentityResolve.md

@@ -6,7 +6,9 @@ Action the identity resolve command.
 
 ## Parameters
 
-• **opts**: `object` & `ICliOutputOptionsConsole` & `ICliOutputOptionsEnv` & `ICliOutputOptionsJson`
+### opts
+
+`object` & `ICliOutputOptionsConsole` & `ICliOutputOptionsEnv` & `ICliOutputOptionsJson`
 
 The options for the command.
 

package/docs/reference/functions/actionCommandProofCreate.md

@@ -6,7 +6,9 @@ Action the proof create command.
 
 ## Parameters
 
-• **opts**: `object` & `ICliOutputOptionsConsole` & `ICliOutputOptionsEnv` & `ICliOutputOptionsJson`
+### opts
+
+`object` & `ICliOutputOptionsConsole` & `ICliOutputOptionsEnv` & `ICliOutputOptionsJson`
 
 The options for the command.
 

package/docs/reference/functions/actionCommandProofVerify.md

@@ -6,7 +6,9 @@ Action the proof verify command.
 
 ## Parameters
 
-• **opts**: `object` & `ICliOutputOptionsConsole` & `ICliOutputOptionsEnv` & `ICliOutputOptionsJson`
+### opts
+
+`object` & `ICliOutputOptionsConsole` & `ICliOutputOptionsEnv` & `ICliOutputOptionsJson`
 
 The options for the command.
 

package/docs/reference/functions/actionCommandServiceAdd.md

@@ -6,7 +6,9 @@ Action the service add command.
 
 ## Parameters
 
-• **opts**: `object` & `ICliOutputOptionsConsole` & `ICliOutputOptionsEnv` & `ICliOutputOptionsJson`
+### opts
+
+`object` & `ICliOutputOptionsConsole` & `ICliOutputOptionsEnv` & `ICliOutputOptionsJson`
 
 The options for the command.