@tscircuit/props 0.0.74 → 0.0.76

package/dist/index.d.ts

@@ -1303,6 +1303,12 @@ interface BoardProps {
     routingDisabled?: boolean;
     children?: any;
     defaultTraceWidth?: Distance;
+    /**
+     * If true, we'll automatically layout the schematic for this group. Must be
+     * a subcircuit (currently). This is eventually going to be replaced with more
+     * sophisticated layout options/modes and will be enabled by default.
+     */
+    schAutoLayoutEnabled?: boolean;
 }
 declare const boardProps: z.ZodObject<{
     width: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -1323,6 +1329,7 @@ declare const boardProps: z.ZodObject<{
     routingDisabled: z.ZodOptional<z.ZodBoolean>;
     children: z.ZodAny;
     defaultTraceWidth: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    schAutoLayoutEnabled: z.ZodOptional<z.ZodBoolean>;
 }, "strip", z.ZodTypeAny, {
     pcbX: number;
     pcbY: number;
@@ -1332,6 +1339,7 @@ declare const boardProps: z.ZodObject<{
     layout?: any;
     routingDisabled?: boolean | undefined;
     defaultTraceWidth?: number | undefined;
+    schAutoLayoutEnabled?: boolean | undefined;
     outline?: {
         x: number;
         y: number;
@@ -1345,6 +1353,7 @@ declare const boardProps: z.ZodObject<{
     layout?: any;
     routingDisabled?: boolean | undefined;
     defaultTraceWidth?: string | number | undefined;
+    schAutoLayoutEnabled?: boolean | undefined;
     outline?: {
         x: string | number;
         y: string | number;
@@ -3146,6 +3155,151 @@ declare const jumperProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.ext
     schDirection?: "left" | "right" | undefined;
 }>;
 
+interface CirclePlatedHoleProps extends Omit<PcbLayoutProps, "pcbRotation" | "layer"> {
+    name?: string;
+    shape: "circle";
+    holeDiameter: number | string;
+    outerDiameter: number | string;
+    portHints?: PortHints;
+}
+interface OvalPlatedHoleProps extends Omit<PcbLayoutProps, "pcbRotation" | "layer"> {
+    name?: string;
+    shape: "oval";
+    outerWidth: number | string;
+    outerHeight: number | string;
+    innerWidth: number | string;
+    innerHeight: number | string;
+    portHints?: PortHints;
+}
+interface PillPlatedHoleProps extends Omit<PcbLayoutProps, "pcbRotation" | "layer"> {
+    name?: string;
+    shape: "pill";
+    outerWidth: number | string;
+    outerHeight: number | string;
+    innerWidth: number | string;
+    innerHeight: number | string;
+    portHints?: PortHints;
+}
+type PlatedHoleProps = CirclePlatedHoleProps | OvalPlatedHoleProps | PillPlatedHoleProps;
+declare const platedHoleProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<z.objectUtil.extendShape<Omit<{
+    pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pcbRotation: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    layer: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>, z.ZodObject<{
+        name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>;
+    }, "strip", z.ZodTypeAny, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }>]>, "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6", "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }>>;
+}, "pcbRotation" | "layer">, {
+    name: z.ZodOptional<z.ZodString>;
+    shape: z.ZodLiteral<"circle">;
+    holeDiameter: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    outerDiameter: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
+}>, "strip", z.ZodTypeAny, {
+    shape: "circle";
+    holeDiameter: number;
+    outerDiameter: number;
+    pcbX?: number | undefined;
+    pcbY?: number | undefined;
+    name?: string | undefined;
+    portHints?: (string | number)[] | undefined;
+}, {
+    shape: "circle";
+    holeDiameter: string | number;
+    outerDiameter: string | number;
+    pcbX?: string | number | undefined;
+    pcbY?: string | number | undefined;
+    name?: string | undefined;
+    portHints?: (string | number)[] | undefined;
+}>, z.ZodObject<z.objectUtil.extendShape<Omit<{
+    pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pcbRotation: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    layer: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>, z.ZodObject<{
+        name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>;
+    }, "strip", z.ZodTypeAny, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }>]>, "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6", "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }>>;
+}, "pcbRotation" | "layer">, {
+    name: z.ZodOptional<z.ZodString>;
+    shape: z.ZodLiteral<"oval">;
+    outerWidth: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    outerHeight: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    innerWidth: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    innerHeight: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
+}>, "strip", z.ZodTypeAny, {
+    shape: "oval";
+    outerWidth: number;
+    outerHeight: number;
+    innerWidth: number;
+    innerHeight: number;
+    pcbX?: number | undefined;
+    pcbY?: number | undefined;
+    name?: string | undefined;
+    portHints?: (string | number)[] | undefined;
+}, {
+    shape: "oval";
+    outerWidth: string | number;
+    outerHeight: string | number;
+    innerWidth: string | number;
+    innerHeight: string | number;
+    pcbX?: string | number | undefined;
+    pcbY?: string | number | undefined;
+    name?: string | undefined;
+    portHints?: (string | number)[] | undefined;
+}>, z.ZodObject<z.objectUtil.extendShape<Omit<{
+    pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pcbRotation: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    layer: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>, z.ZodObject<{
+        name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>;
+    }, "strip", z.ZodTypeAny, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }>]>, "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6", "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }>>;
+}, "pcbRotation" | "layer">, {
+    name: z.ZodOptional<z.ZodString>;
+    shape: z.ZodLiteral<"pill">;
+    outerWidth: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    outerHeight: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    innerWidth: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    innerHeight: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
+}>, "strip", z.ZodTypeAny, {
+    shape: "pill";
+    outerWidth: number;
+    outerHeight: number;
+    innerWidth: number;
+    innerHeight: number;
+    pcbX?: number | undefined;
+    pcbY?: number | undefined;
+    name?: string | undefined;
+    portHints?: (string | number)[] | undefined;
+}, {
+    shape: "pill";
+    outerWidth: string | number;
+    outerHeight: string | number;
+    innerWidth: string | number;
+    innerHeight: string | number;
+    pcbX?: string | number | undefined;
+    pcbY?: string | number | undefined;
+    name?: string | undefined;
+    portHints?: (string | number)[] | undefined;
+}>]>;
+
 interface ResistorProps extends CommonComponentProps {
     resistance: number | string;
     pullupFor?: string;
@@ -3991,6 +4145,12 @@ interface SubcircuitGroupProps extends BaseGroupProps {
     layout?: LayoutBuilder;
     routingDisabled?: boolean;
     defaultTraceWidth?: Distance;
+    /**
+     * If true, we'll automatically layout the schematic for this group. Must be
+     * a subcircuit (currently). This is eventually going to be replaced with more
+     * sophisticated layout options/modes and will be enabled by default.
+     */
+    schAutoLayoutEnabled?: boolean;
 }
 type GroupProps = SubcircuitGroupProps | BaseGroupProps;
 declare const baseGroupProps: z.ZodObject<z.objectUtil.extendShape<{
@@ -4061,6 +4221,7 @@ declare const subcircuitGroupProps: z.ZodObject<z.objectUtil.extendShape<z.objec
 }>, {
     subcircuit: z.ZodLiteral<true>;
     layout: z.ZodOptional<z.ZodType<LayoutBuilder, z.ZodTypeDef, LayoutBuilder>>;
+    schAutoLayoutEnabled: z.ZodOptional<z.ZodBoolean>;
     routingDisabled: z.ZodOptional<z.ZodBoolean>;
     defaultTraceWidth: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }>, "strip", z.ZodTypeAny, {
@@ -4078,6 +4239,7 @@ declare const subcircuitGroupProps: z.ZodObject<z.objectUtil.extendShape<z.objec
     layout?: LayoutBuilder | undefined;
     routingDisabled?: boolean | undefined;
     defaultTraceWidth?: number | undefined;
+    schAutoLayoutEnabled?: boolean | undefined;
 }, {
     subcircuit: true;
     pcbX?: string | number | undefined;
@@ -4095,6 +4257,7 @@ declare const subcircuitGroupProps: z.ZodObject<z.objectUtil.extendShape<z.objec
     layout?: LayoutBuilder | undefined;
     routingDisabled?: boolean | undefined;
     defaultTraceWidth?: string | number | undefined;
+    schAutoLayoutEnabled?: boolean | undefined;
 }>;
 declare const groupProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<{
     pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -4163,6 +4326,7 @@ declare const groupProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<{
 }>, {
     subcircuit: z.ZodLiteral<true>;
     layout: z.ZodOptional<z.ZodType<LayoutBuilder, z.ZodTypeDef, LayoutBuilder>>;
+    schAutoLayoutEnabled: z.ZodOptional<z.ZodBoolean>;
     routingDisabled: z.ZodOptional<z.ZodBoolean>;
     defaultTraceWidth: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }>, "strip", z.ZodTypeAny, {
@@ -4180,6 +4344,7 @@ declare const groupProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<{
     layout?: LayoutBuilder | undefined;
     routingDisabled?: boolean | undefined;
     defaultTraceWidth?: number | undefined;
+    schAutoLayoutEnabled?: boolean | undefined;
 }, {
     subcircuit: true;
     pcbX?: string | number | undefined;
@@ -4197,6 +4362,7 @@ declare const groupProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<{
     layout?: LayoutBuilder | undefined;
     routingDisabled?: boolean | undefined;
     defaultTraceWidth?: string | number | undefined;
+    schAutoLayoutEnabled?: boolean | undefined;
 }>]>;
 
 interface NetProps {
@@ -7114,84 +7280,6 @@ declare const netAliasProps: z.ZodObject<z.objectUtil.extendShape<{
     net?: string | undefined;
 }>;
 type NetAliasProps = z.input<typeof netAliasProps>;
-declare const platedHoleProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<Omit<{
-    pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
-    pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
-    pcbRotation: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
-    layer: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>, z.ZodObject<{
-        name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>;
-    }, "strip", z.ZodTypeAny, {
-        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
-    }, {
-        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
-    }>]>, "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6", "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | {
-        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
-    }>>;
-}, "pcbRotation" | "layer">, {
-    name: z.ZodOptional<z.ZodString>;
-    shape: z.ZodLiteral<"circle">;
-    holeDiameter: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
-    outerDiameter: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
-    portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
-}>, "strip", z.ZodTypeAny, {
-    shape: "circle";
-    holeDiameter: number;
-    outerDiameter: number;
-    pcbX?: number | undefined;
-    pcbY?: number | undefined;
-    name?: string | undefined;
-    portHints?: (string | number)[] | undefined;
-}, {
-    shape: "circle";
-    holeDiameter: string | number;
-    outerDiameter: string | number;
-    pcbX?: string | number | undefined;
-    pcbY?: string | number | undefined;
-    name?: string | undefined;
-    portHints?: (string | number)[] | undefined;
-}>, z.ZodObject<z.objectUtil.extendShape<Omit<{
-    pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
-    pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
-    pcbRotation: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
-    layer: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>, z.ZodObject<{
-        name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>;
-    }, "strip", z.ZodTypeAny, {
-        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
-    }, {
-        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
-    }>]>, "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6", "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | {
-        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
-    }>>;
-}, "pcbRotation" | "layer">, {
-    name: z.ZodOptional<z.ZodString>;
-    shape: z.ZodLiteral<"oval">;
-    outerWidth: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
-    outerHeight: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
-    innerWidth: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
-    innerHeight: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
-    portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
-}>, "strip", z.ZodTypeAny, {
-    shape: "oval";
-    outerWidth: number;
-    outerHeight: number;
-    innerWidth: number;
-    innerHeight: number;
-    pcbX?: number | undefined;
-    pcbY?: number | undefined;
-    name?: string | undefined;
-    portHints?: (string | number)[] | undefined;
-}, {
-    shape: "oval";
-    outerWidth: string | number;
-    outerHeight: string | number;
-    innerWidth: string | number;
-    innerHeight: string | number;
-    pcbX?: string | number | undefined;
-    pcbY?: string | number | undefined;
-    name?: string | undefined;
-    portHints?: (string | number)[] | undefined;
-}>]>;
-type PlatedHoleProps = z.input<typeof platedHoleProps>;
 declare const pcbKeepoutProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<Omit<{
     pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -8783,4 +8871,4 @@ declare const fabricationNotePathProps: z.ZodObject<z.objectUtil.extendShape<Omi
 }>;
 type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>;
 
-export { type BaseGroupProps, type BatteryProps, type BoardProps, type CadModelBase, type CadModelJscad, type CadModelObj, type CadModelProp, type CadModelStl, type CapacitorProps, type ChipProps, type CircleSmtPadProps, type CircleSolderPasteProps, type CommonComponentProps, type CommonLayoutProps, type ComponentProps, type ConstrainedLayoutProps, type ConstraintProps, type DiodeProps, type Direction, type DirectionAlongEdge, type FabricationNotePathProps, type FabricationNoteTextProps, type Footprint, type FootprintProps, type FootprintPropsInput, type FootprintSoupElements, type GroupProps, type HoleProps, type InductorProps, type InferredChipProps, type InferredConstrainedLayoutProps, type InferredHoleProps, type InferredSmtPadProps, type InferredSolderPasteProps, type JumperProps, type LedProps, type NetAliasProps, type NetProps, type PcbKeepoutProps, type PcbLayoutProps, type PcbSameXConstraint, type PcbSameYConstraint, type PcbTraceProps, type PcbXDistConstraint, type PcbYDistConstraint, type PinSideDefinition, type PlatedHoleProps, type PortHints, type PortProps, type PowerSourceProps, type RectSmtPadProps, type RectSolderPasteProps, type ResistorProps, type SchematicBoxProps, type SchematicLineProps, type SchematicPathProps, type SchematicPinStyle, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicTextProps, type SilkscreenCircleProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SmtPadProps, type SolderPasteProps, type SubcircuitGroupProps, type SupplierName, type SupplierProps, type SwitchProps, type TraceHintProps, type TraceProps, type ViaProps, baseGroupProps, batteryPins, batteryProps, boardProps, bugProps, cadModelBase, cadModelJscad, cadModelObj, cadModelProp, cadModelStl, capacitorPins, capacitorProps, chipProps, circleSmtPadProps, circleSolderPasteProps, commonComponentProps, commonLayoutProps, componentProps, constrainedLayoutProps, constraintProps, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, explicitPinSideDefinition, fabricationNotePathProps, fabricationNoteTextProps, footprintProp, footprintProps, groupProps, holeProps, inductorPins, inductorProps, jumperProps, ledPins, ledProps, lrPins, lrPolarPins, netAliasProps, netProps, pcbKeepoutProps, pcbLayoutProps, pcbSameXConstraintProps, pcbSameYConstraintProps, pcbTraceProps, pcbXDistConstraintProps, pcbYDistConstraintProps, platedHoleProps, point3, portHints, portProps, portRef, powerSourceProps, rectSmtPadProps, rectSolderPasteProps, resistorPins, resistorProps, rotationPoint3, routeHintPointProps, schematicBoxProps, schematicLineProps, schematicPathProps, schematicPinStyle, schematicPortArrangement, schematicTextProps, silkscreenCircleProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, solderPasteProps, subcircuitGroupProps, supplierProps, switchProps, traceHintProps, traceProps, viaProps };
+export { type BaseGroupProps, type BatteryProps, type BoardProps, type CadModelBase, type CadModelJscad, type CadModelObj, type CadModelProp, type CadModelStl, type CapacitorProps, type ChipProps, type CirclePlatedHoleProps, type CircleSmtPadProps, type CircleSolderPasteProps, type CommonComponentProps, type CommonLayoutProps, type ComponentProps, type ConstrainedLayoutProps, type ConstraintProps, type DiodeProps, type Direction, type DirectionAlongEdge, type FabricationNotePathProps, type FabricationNoteTextProps, type Footprint, type FootprintProps, type FootprintPropsInput, type FootprintSoupElements, type GroupProps, type HoleProps, type InductorProps, type InferredChipProps, type InferredConstrainedLayoutProps, type InferredHoleProps, type InferredSmtPadProps, type InferredSolderPasteProps, type JumperProps, type LedProps, type NetAliasProps, type NetProps, type OvalPlatedHoleProps, type PcbKeepoutProps, type PcbLayoutProps, type PcbSameXConstraint, type PcbSameYConstraint, type PcbTraceProps, type PcbXDistConstraint, type PcbYDistConstraint, type PillPlatedHoleProps, type PinSideDefinition, type PlatedHoleProps, type PortHints, type PortProps, type PowerSourceProps, type RectSmtPadProps, type RectSolderPasteProps, type ResistorProps, type SchematicBoxProps, type SchematicLineProps, type SchematicPathProps, type SchematicPinStyle, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicTextProps, type SilkscreenCircleProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SmtPadProps, type SolderPasteProps, type SubcircuitGroupProps, type SupplierName, type SupplierProps, type SwitchProps, type TraceHintProps, type TraceProps, type ViaProps, baseGroupProps, batteryPins, batteryProps, boardProps, bugProps, cadModelBase, cadModelJscad, cadModelObj, cadModelProp, cadModelStl, capacitorPins, capacitorProps, chipProps, circleSmtPadProps, circleSolderPasteProps, commonComponentProps, commonLayoutProps, componentProps, constrainedLayoutProps, constraintProps, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, explicitPinSideDefinition, fabricationNotePathProps, fabricationNoteTextProps, footprintProp, footprintProps, groupProps, holeProps, inductorPins, inductorProps, jumperProps, ledPins, ledProps, lrPins, lrPolarPins, netAliasProps, netProps, pcbKeepoutProps, pcbLayoutProps, pcbSameXConstraintProps, pcbSameYConstraintProps, pcbTraceProps, pcbXDistConstraintProps, pcbYDistConstraintProps, platedHoleProps, point3, portHints, portProps, portRef, powerSourceProps, rectSmtPadProps, rectSolderPasteProps, resistorPins, resistorProps, rotationPoint3, routeHintPointProps, schematicBoxProps, schematicLineProps, schematicPathProps, schematicPinStyle, schematicPortArrangement, schematicTextProps, silkscreenCircleProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, solderPasteProps, subcircuitGroupProps, supplierProps, switchProps, traceHintProps, traceProps, viaProps };