@tscircuit/props 0.0.73 → 0.0.75

package/dist/index.d.ts

@@ -1303,6 +1303,12 @@ interface BoardProps {
     routingDisabled?: boolean;
     children?: any;
     defaultTraceWidth?: Distance;
+    /**
+     * If true, we'll automatically layout the schematic for this group. Must be
+     * a subcircuit (currently). This is eventually going to be replaced with more
+     * sophisticated layout options/modes and will be enabled by default.
+     */
+    schAutoLayoutEnabled?: boolean;
 }
 declare const boardProps: z.ZodObject<{
     width: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -1323,6 +1329,7 @@ declare const boardProps: z.ZodObject<{
     routingDisabled: z.ZodOptional<z.ZodBoolean>;
     children: z.ZodAny;
     defaultTraceWidth: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    schAutoLayoutEnabled: z.ZodOptional<z.ZodBoolean>;
 }, "strip", z.ZodTypeAny, {
     pcbX: number;
     pcbY: number;
@@ -1332,6 +1339,7 @@ declare const boardProps: z.ZodObject<{
     layout?: any;
     routingDisabled?: boolean | undefined;
     defaultTraceWidth?: number | undefined;
+    schAutoLayoutEnabled?: boolean | undefined;
     outline?: {
         x: number;
         y: number;
@@ -1345,6 +1353,7 @@ declare const boardProps: z.ZodObject<{
     layout?: any;
     routingDisabled?: boolean | undefined;
     defaultTraceWidth?: string | number | undefined;
+    schAutoLayoutEnabled?: boolean | undefined;
     outline?: {
         x: string | number;
         y: string | number;
@@ -3991,6 +4000,12 @@ interface SubcircuitGroupProps extends BaseGroupProps {
     layout?: LayoutBuilder;
     routingDisabled?: boolean;
     defaultTraceWidth?: Distance;
+    /**
+     * If true, we'll automatically layout the schematic for this group. Must be
+     * a subcircuit (currently). This is eventually going to be replaced with more
+     * sophisticated layout options/modes and will be enabled by default.
+     */
+    schAutoLayoutEnabled?: boolean;
 }
 type GroupProps = SubcircuitGroupProps | BaseGroupProps;
 declare const baseGroupProps: z.ZodObject<z.objectUtil.extendShape<{
@@ -4061,6 +4076,7 @@ declare const subcircuitGroupProps: z.ZodObject<z.objectUtil.extendShape<z.objec
 }>, {
     subcircuit: z.ZodLiteral<true>;
     layout: z.ZodOptional<z.ZodType<LayoutBuilder, z.ZodTypeDef, LayoutBuilder>>;
+    schAutoLayoutEnabled: z.ZodOptional<z.ZodBoolean>;
     routingDisabled: z.ZodOptional<z.ZodBoolean>;
     defaultTraceWidth: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }>, "strip", z.ZodTypeAny, {
@@ -4078,6 +4094,7 @@ declare const subcircuitGroupProps: z.ZodObject<z.objectUtil.extendShape<z.objec
     layout?: LayoutBuilder | undefined;
     routingDisabled?: boolean | undefined;
     defaultTraceWidth?: number | undefined;
+    schAutoLayoutEnabled?: boolean | undefined;
 }, {
     subcircuit: true;
     pcbX?: string | number | undefined;
@@ -4095,6 +4112,7 @@ declare const subcircuitGroupProps: z.ZodObject<z.objectUtil.extendShape<z.objec
     layout?: LayoutBuilder | undefined;
     routingDisabled?: boolean | undefined;
     defaultTraceWidth?: string | number | undefined;
+    schAutoLayoutEnabled?: boolean | undefined;
 }>;
 declare const groupProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<{
     pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -4163,6 +4181,7 @@ declare const groupProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<{
 }>, {
     subcircuit: z.ZodLiteral<true>;
     layout: z.ZodOptional<z.ZodType<LayoutBuilder, z.ZodTypeDef, LayoutBuilder>>;
+    schAutoLayoutEnabled: z.ZodOptional<z.ZodBoolean>;
     routingDisabled: z.ZodOptional<z.ZodBoolean>;
     defaultTraceWidth: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }>, "strip", z.ZodTypeAny, {
@@ -4180,6 +4199,7 @@ declare const groupProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<{
     layout?: LayoutBuilder | undefined;
     routingDisabled?: boolean | undefined;
     defaultTraceWidth?: number | undefined;
+    schAutoLayoutEnabled?: boolean | undefined;
 }, {
     subcircuit: true;
     pcbX?: string | number | undefined;
@@ -4197,6 +4217,7 @@ declare const groupProps: z.ZodUnion<[z.ZodObject<z.objectUtil.extendShape<{
     layout?: LayoutBuilder | undefined;
     routingDisabled?: boolean | undefined;
     defaultTraceWidth?: string | number | undefined;
+    schAutoLayoutEnabled?: boolean | undefined;
 }>]>;
 
 interface NetProps {
@@ -4999,6 +5020,408 @@ declare const footprintProps: z.ZodObject<{
 }>;
 type FootprintPropsInput = z.input<typeof footprintProps>;
 
+interface BatteryProps extends CommonComponentProps {
+    capacity?: number | string;
+}
+declare const batteryProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.extendShape<z.objectUtil.extendShape<{
+    pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pcbRotation: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    schX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    schY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    schRotation: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    layer: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>, z.ZodObject<{
+        name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>;
+    }, "strip", z.ZodTypeAny, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }>]>, "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6", "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }>>;
+    footprint: z.ZodOptional<z.ZodType<Footprint, z.ZodTypeDef, Footprint>>;
+}, {
+    supplierPartNumbers: z.ZodOptional<z.ZodRecord<z.ZodEnum<["jlcpcb", "macrofab", "pcbway", "digikey", "mouser", "lcsc"]>, z.ZodArray<z.ZodString, "many">>>;
+}>, {
+    key: z.ZodOptional<z.ZodAny>;
+    name: z.ZodString;
+    cadModel: z.ZodOptional<z.ZodUnion<[z.ZodString, z.ZodObject<z.objectUtil.extendShape<{
+        rotationOffset: z.ZodOptional<z.ZodUnion<[z.ZodNumber, z.ZodObject<{
+            x: z.ZodUnion<[z.ZodNumber, z.ZodString]>;
+            y: z.ZodUnion<[z.ZodNumber, z.ZodString]>;
+            z: z.ZodUnion<[z.ZodNumber, z.ZodString]>;
+        }, "strip", z.ZodTypeAny, {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        }, {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        }>]>>;
+        positionOffset: z.ZodOptional<z.ZodObject<{
+            x: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            y: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            z: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+        }, "strip", z.ZodTypeAny, {
+            x: number;
+            y: number;
+            z: number;
+        }, {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        }>>;
+        size: z.ZodOptional<z.ZodObject<{
+            x: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            y: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            z: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+        }, "strip", z.ZodTypeAny, {
+            x: number;
+            y: number;
+            z: number;
+        }, {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        }>>;
+    }, {
+        stlUrl: z.ZodString;
+    }>, "strip", z.ZodTypeAny, {
+        stlUrl: string;
+        rotationOffset?: number | {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        positionOffset?: {
+            x: number;
+            y: number;
+            z: number;
+        } | undefined;
+        size?: {
+            x: number;
+            y: number;
+            z: number;
+        } | undefined;
+    }, {
+        stlUrl: string;
+        rotationOffset?: number | {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        positionOffset?: {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        size?: {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+    }>, z.ZodObject<z.objectUtil.extendShape<{
+        rotationOffset: z.ZodOptional<z.ZodUnion<[z.ZodNumber, z.ZodObject<{
+            x: z.ZodUnion<[z.ZodNumber, z.ZodString]>;
+            y: z.ZodUnion<[z.ZodNumber, z.ZodString]>;
+            z: z.ZodUnion<[z.ZodNumber, z.ZodString]>;
+        }, "strip", z.ZodTypeAny, {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        }, {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        }>]>>;
+        positionOffset: z.ZodOptional<z.ZodObject<{
+            x: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            y: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            z: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+        }, "strip", z.ZodTypeAny, {
+            x: number;
+            y: number;
+            z: number;
+        }, {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        }>>;
+        size: z.ZodOptional<z.ZodObject<{
+            x: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            y: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            z: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+        }, "strip", z.ZodTypeAny, {
+            x: number;
+            y: number;
+            z: number;
+        }, {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        }>>;
+    }, {
+        objUrl: z.ZodString;
+        mtlUrl: z.ZodOptional<z.ZodString>;
+    }>, "strip", z.ZodTypeAny, {
+        objUrl: string;
+        rotationOffset?: number | {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        positionOffset?: {
+            x: number;
+            y: number;
+            z: number;
+        } | undefined;
+        size?: {
+            x: number;
+            y: number;
+            z: number;
+        } | undefined;
+        mtlUrl?: string | undefined;
+    }, {
+        objUrl: string;
+        rotationOffset?: number | {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        positionOffset?: {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        size?: {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        mtlUrl?: string | undefined;
+    }>, z.ZodObject<z.objectUtil.extendShape<{
+        rotationOffset: z.ZodOptional<z.ZodUnion<[z.ZodNumber, z.ZodObject<{
+            x: z.ZodUnion<[z.ZodNumber, z.ZodString]>;
+            y: z.ZodUnion<[z.ZodNumber, z.ZodString]>;
+            z: z.ZodUnion<[z.ZodNumber, z.ZodString]>;
+        }, "strip", z.ZodTypeAny, {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        }, {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        }>]>>;
+        positionOffset: z.ZodOptional<z.ZodObject<{
+            x: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            y: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            z: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+        }, "strip", z.ZodTypeAny, {
+            x: number;
+            y: number;
+            z: number;
+        }, {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        }>>;
+        size: z.ZodOptional<z.ZodObject<{
+            x: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            y: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+            z: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+        }, "strip", z.ZodTypeAny, {
+            x: number;
+            y: number;
+            z: number;
+        }, {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        }>>;
+    }, {
+        jscad: z.ZodRecord<z.ZodString, z.ZodAny>;
+    }>, "strip", z.ZodTypeAny, {
+        jscad: Record<string, any>;
+        rotationOffset?: number | {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        positionOffset?: {
+            x: number;
+            y: number;
+            z: number;
+        } | undefined;
+        size?: {
+            x: number;
+            y: number;
+            z: number;
+        } | undefined;
+    }, {
+        jscad: Record<string, any>;
+        rotationOffset?: number | {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        positionOffset?: {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        size?: {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+    }>]>>;
+    children: z.ZodOptional<z.ZodAny>;
+    symbolName: z.ZodOptional<z.ZodString>;
+}>, {
+    capacity: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>;
+}>, "strip", z.ZodTypeAny, {
+    name: string;
+    pcbX?: number | undefined;
+    pcbY?: number | undefined;
+    pcbRotation?: number | undefined;
+    schX?: number | undefined;
+    schY?: number | undefined;
+    schRotation?: number | undefined;
+    layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | undefined;
+    footprint?: Footprint | undefined;
+    supplierPartNumbers?: Partial<Record<"jlcpcb" | "macrofab" | "pcbway" | "digikey" | "mouser" | "lcsc", string[]>> | undefined;
+    key?: any;
+    cadModel?: string | {
+        stlUrl: string;
+        rotationOffset?: number | {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        positionOffset?: {
+            x: number;
+            y: number;
+            z: number;
+        } | undefined;
+        size?: {
+            x: number;
+            y: number;
+            z: number;
+        } | undefined;
+    } | {
+        objUrl: string;
+        rotationOffset?: number | {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        positionOffset?: {
+            x: number;
+            y: number;
+            z: number;
+        } | undefined;
+        size?: {
+            x: number;
+            y: number;
+            z: number;
+        } | undefined;
+        mtlUrl?: string | undefined;
+    } | {
+        jscad: Record<string, any>;
+        rotationOffset?: number | {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        positionOffset?: {
+            x: number;
+            y: number;
+            z: number;
+        } | undefined;
+        size?: {
+            x: number;
+            y: number;
+            z: number;
+        } | undefined;
+    } | undefined;
+    children?: any;
+    symbolName?: string | undefined;
+    capacity?: number | undefined;
+}, {
+    name: string;
+    pcbX?: string | number | undefined;
+    pcbY?: string | number | undefined;
+    pcbRotation?: string | number | undefined;
+    schX?: string | number | undefined;
+    schY?: string | number | undefined;
+    schRotation?: string | number | undefined;
+    layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    } | undefined;
+    footprint?: Footprint | undefined;
+    supplierPartNumbers?: Partial<Record<"jlcpcb" | "macrofab" | "pcbway" | "digikey" | "mouser" | "lcsc", string[]>> | undefined;
+    key?: any;
+    cadModel?: string | {
+        stlUrl: string;
+        rotationOffset?: number | {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        positionOffset?: {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        size?: {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+    } | {
+        objUrl: string;
+        rotationOffset?: number | {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        positionOffset?: {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        size?: {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        mtlUrl?: string | undefined;
+    } | {
+        jscad: Record<string, any>;
+        rotationOffset?: number | {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        positionOffset?: {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+        size?: {
+            x: string | number;
+            y: string | number;
+            z: string | number;
+        } | undefined;
+    } | undefined;
+    children?: any;
+    symbolName?: string | undefined;
+    capacity?: string | number | undefined;
+}>;
+declare const batteryPins: readonly ["pin1", "left", "anode", "pos", "pin2", "right", "cathode", "neg"];
+
 declare const inductorProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.extendShape<z.objectUtil.extendShape<{
     pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -8381,4 +8804,4 @@ declare const fabricationNotePathProps: z.ZodObject<z.objectUtil.extendShape<Omi
 }>;
 type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>;
 
-export { type BaseGroupProps, type BoardProps, type CadModelBase, type CadModelJscad, type CadModelObj, type CadModelProp, type CadModelStl, type CapacitorProps, type ChipProps, type CircleSmtPadProps, type CircleSolderPasteProps, type CommonComponentProps, type CommonLayoutProps, type ComponentProps, type ConstrainedLayoutProps, type ConstraintProps, type DiodeProps, type Direction, type DirectionAlongEdge, type FabricationNotePathProps, type FabricationNoteTextProps, type Footprint, type FootprintProps, type FootprintPropsInput, type FootprintSoupElements, type GroupProps, type HoleProps, type InductorProps, type InferredChipProps, type InferredConstrainedLayoutProps, type InferredHoleProps, type InferredSmtPadProps, type InferredSolderPasteProps, type JumperProps, type LedProps, type NetAliasProps, type NetProps, type PcbKeepoutProps, type PcbLayoutProps, type PcbSameXConstraint, type PcbSameYConstraint, type PcbTraceProps, type PcbXDistConstraint, type PcbYDistConstraint, type PinSideDefinition, type PlatedHoleProps, type PortHints, type PortProps, type PowerSourceProps, type RectSmtPadProps, type RectSolderPasteProps, type ResistorProps, type SchematicBoxProps, type SchematicLineProps, type SchematicPathProps, type SchematicPinStyle, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicTextProps, type SilkscreenCircleProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SmtPadProps, type SolderPasteProps, type SubcircuitGroupProps, type SupplierName, type SupplierProps, type SwitchProps, type TraceHintProps, type TraceProps, type ViaProps, baseGroupProps, boardProps, bugProps, cadModelBase, cadModelJscad, cadModelObj, cadModelProp, cadModelStl, capacitorPins, capacitorProps, chipProps, circleSmtPadProps, circleSolderPasteProps, commonComponentProps, commonLayoutProps, componentProps, constrainedLayoutProps, constraintProps, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, explicitPinSideDefinition, fabricationNotePathProps, fabricationNoteTextProps, footprintProp, footprintProps, groupProps, holeProps, inductorPins, inductorProps, jumperProps, ledPins, ledProps, lrPins, lrPolarPins, netAliasProps, netProps, pcbKeepoutProps, pcbLayoutProps, pcbSameXConstraintProps, pcbSameYConstraintProps, pcbTraceProps, pcbXDistConstraintProps, pcbYDistConstraintProps, platedHoleProps, point3, portHints, portProps, portRef, powerSourceProps, rectSmtPadProps, rectSolderPasteProps, resistorPins, resistorProps, rotationPoint3, routeHintPointProps, schematicBoxProps, schematicLineProps, schematicPathProps, schematicPinStyle, schematicPortArrangement, schematicTextProps, silkscreenCircleProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, solderPasteProps, subcircuitGroupProps, supplierProps, switchProps, traceHintProps, traceProps, viaProps };
+export { type BaseGroupProps, type BatteryProps, type BoardProps, type CadModelBase, type CadModelJscad, type CadModelObj, type CadModelProp, type CadModelStl, type CapacitorProps, type ChipProps, type CircleSmtPadProps, type CircleSolderPasteProps, type CommonComponentProps, type CommonLayoutProps, type ComponentProps, type ConstrainedLayoutProps, type ConstraintProps, type DiodeProps, type Direction, type DirectionAlongEdge, type FabricationNotePathProps, type FabricationNoteTextProps, type Footprint, type FootprintProps, type FootprintPropsInput, type FootprintSoupElements, type GroupProps, type HoleProps, type InductorProps, type InferredChipProps, type InferredConstrainedLayoutProps, type InferredHoleProps, type InferredSmtPadProps, type InferredSolderPasteProps, type JumperProps, type LedProps, type NetAliasProps, type NetProps, type PcbKeepoutProps, type PcbLayoutProps, type PcbSameXConstraint, type PcbSameYConstraint, type PcbTraceProps, type PcbXDistConstraint, type PcbYDistConstraint, type PinSideDefinition, type PlatedHoleProps, type PortHints, type PortProps, type PowerSourceProps, type RectSmtPadProps, type RectSolderPasteProps, type ResistorProps, type SchematicBoxProps, type SchematicLineProps, type SchematicPathProps, type SchematicPinStyle, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicTextProps, type SilkscreenCircleProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SmtPadProps, type SolderPasteProps, type SubcircuitGroupProps, type SupplierName, type SupplierProps, type SwitchProps, type TraceHintProps, type TraceProps, type ViaProps, baseGroupProps, batteryPins, batteryProps, boardProps, bugProps, cadModelBase, cadModelJscad, cadModelObj, cadModelProp, cadModelStl, capacitorPins, capacitorProps, chipProps, circleSmtPadProps, circleSolderPasteProps, commonComponentProps, commonLayoutProps, componentProps, constrainedLayoutProps, constraintProps, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, explicitPinSideDefinition, fabricationNotePathProps, fabricationNoteTextProps, footprintProp, footprintProps, groupProps, holeProps, inductorPins, inductorProps, jumperProps, ledPins, ledProps, lrPins, lrPolarPins, netAliasProps, netProps, pcbKeepoutProps, pcbLayoutProps, pcbSameXConstraintProps, pcbSameYConstraintProps, pcbTraceProps, pcbXDistConstraintProps, pcbYDistConstraintProps, platedHoleProps, point3, portHints, portProps, portRef, powerSourceProps, rectSmtPadProps, rectSolderPasteProps, resistorPins, resistorProps, rotationPoint3, routeHintPointProps, schematicBoxProps, schematicLineProps, schematicPathProps, schematicPinStyle, schematicPortArrangement, schematicTextProps, silkscreenCircleProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, solderPasteProps, subcircuitGroupProps, supplierProps, switchProps, traceHintProps, traceProps, viaProps };

package/dist/index.js

@@ -21,6 +21,8 @@ var __toCommonJS = (mod) => __copyProps(__defProp({}, "__esModule", { value: tru
 var lib_exports = {};
 __export(lib_exports, {
   baseGroupProps: () => baseGroupProps,
+  batteryPins: () => batteryPins,
+  batteryProps: () => batteryProps,
   boardProps: () => boardProps,
   bugProps: () => bugProps,
   cadModelBase: () => cadModelBase,
@@ -100,7 +102,7 @@ __export(lib_exports, {
 });
 module.exports = __toCommonJS(lib_exports);
 var import_soup14 = require("@tscircuit/soup");
-var import_zod25 = require("zod");
+var import_zod26 = require("zod");
 
 // lib/typecheck.ts
 var expectTypesMatch = (shouldBe) => {
@@ -277,7 +279,8 @@ var boardProps = import_zod10.z.object({
   layout: import_zod10.z.any().optional(),
   routingDisabled: import_zod10.z.boolean().optional(),
   children: import_zod10.z.any(),
-  defaultTraceWidth: import_soup5.distance.optional()
+  defaultTraceWidth: import_soup5.distance.optional(),
+  schAutoLayoutEnabled: import_zod10.z.boolean().optional()
 });
 expectTypesMatch(true);
 
@@ -347,6 +350,7 @@ var baseGroupProps = commonLayoutProps.extend({
 var subcircuitGroupProps = baseGroupProps.extend({
   subcircuit: import_zod15.z.literal(true),
   layout: import_zod15.z.custom((v) => true).optional(),
+  schAutoLayoutEnabled: import_zod15.z.boolean().optional(),
   routingDisabled: import_zod15.z.boolean().optional(),
   defaultTraceWidth: import_soup10.length.optional()
 });
@@ -506,6 +510,25 @@ var footprintProps = import_zod24.z.object({
 });
 expectTypesMatch(true);
 
+// lib/components/battery.ts
+var import_zod25 = require("zod");
+var capacity = import_zod25.z.number().or(import_zod25.z.string().endsWith("mAh")).transform((v) => {
+  if (typeof v === "string") {
+    const valString = v.replace("mAh", "");
+    const num = Number.parseFloat(valString);
+    if (Number.isNaN(num)) {
+      throw new Error("Invalid capacity");
+    }
+    return num;
+  }
+  return v;
+}).describe("Battery capacity in mAh");
+var batteryProps = commonComponentProps.extend({
+  capacity: capacity.optional()
+});
+var batteryPins = lrPolarPins;
+expectTypesMatch(true);
+
 // lib/index.ts
 var inductorProps = commonComponentProps.extend({
   inductance: import_soup14.inductance
@@ -514,15 +537,15 @@ var inductorPins = lrPins;
 var diodeProps = commonComponentProps.extend({});
 var diodePins = lrPolarPins;
 var ledProps = commonComponentProps.extend({
-  color: import_zod25.z.string().optional()
+  color: import_zod26.z.string().optional()
 });
 var ledPins = lrPolarPins;
 var switchProps = commonComponentProps.extend({
-  ftype: import_zod25.z.literal("switch"),
-  switchType: import_zod25.z.enum(["spst"]).default("spst"),
-  isNormallyClosed: import_zod25.z.boolean().default(false)
+  ftype: import_zod26.z.literal("switch"),
+  switchType: import_zod26.z.enum(["spst"]).default("spst"),
+  isNormallyClosed: import_zod26.z.boolean().default(false)
 });
-var distanceOrMultiplier2 = import_soup14.distance.or(import_zod25.z.enum(["2x", "3x", "4x"]));
+var distanceOrMultiplier2 = import_soup14.distance.or(import_zod26.z.enum(["2x", "3x", "4x"]));
 var viaProps = commonLayoutProps.extend({
   fromLayer: import_soup14.layer_ref,
   toLayer: import_soup14.layer_ref,
@@ -530,19 +553,19 @@ var viaProps = commonLayoutProps.extend({
   outerDiameter: import_soup14.distance
 });
 var netAliasProps = commonLayoutProps.extend({
-  net: import_zod25.z.string().optional()
+  net: import_zod26.z.string().optional()
 });
-var platedHoleProps = import_zod25.z.union([
+var platedHoleProps = import_zod26.z.union([
   pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
-    name: import_zod25.z.string().optional(),
-    shape: import_zod25.z.literal("circle"),
+    name: import_zod26.z.string().optional(),
+    shape: import_zod26.z.literal("circle"),
     holeDiameter: import_soup14.distance,
     outerDiameter: import_soup14.distance,
     portHints: portHints.optional()
   }),
   pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
-    name: import_zod25.z.string().optional(),
-    shape: import_zod25.z.literal("oval"),
+    name: import_zod26.z.string().optional(),
+    shape: import_zod26.z.literal("oval"),
     outerWidth: import_soup14.distance,
     outerHeight: import_soup14.distance,
     innerWidth: import_soup14.distance,
@@ -550,57 +573,57 @@ var platedHoleProps = import_zod25.z.union([
     portHints: portHints.optional()
   })
 ]);
-var pcbKeepoutProps = import_zod25.z.union([
+var pcbKeepoutProps = import_zod26.z.union([
   pcbLayoutProps.omit({ pcbRotation: true }).extend({
-    shape: import_zod25.z.literal("circle"),
+    shape: import_zod26.z.literal("circle"),
     radius: import_soup14.distance
   }),
   pcbLayoutProps.extend({
-    shape: import_zod25.z.literal("rect"),
+    shape: import_zod26.z.literal("rect"),
     width: import_soup14.distance,
     height: import_soup14.distance
   })
 ]);
-var schematicBoxProps = import_zod25.z.object({
+var schematicBoxProps = import_zod26.z.object({
   schX: import_soup14.distance,
   schY: import_soup14.distance,
   width: import_soup14.distance,
   height: import_soup14.distance
 });
-var schematicTextProps = import_zod25.z.object({
+var schematicTextProps = import_zod26.z.object({
   schX: import_soup14.distance,
   schY: import_soup14.distance,
-  text: import_zod25.z.string()
+  text: import_zod26.z.string()
 });
-var schematicLineProps = import_zod25.z.object({
+var schematicLineProps = import_zod26.z.object({
   x1: import_soup14.distance,
   y1: import_soup14.distance,
   x2: import_soup14.distance,
   y2: import_soup14.distance
 });
-var schematicPathProps = import_zod25.z.object({
-  points: import_zod25.z.array(import_soup14.point),
-  isFilled: import_zod25.z.boolean().optional().default(false),
-  fillColor: import_zod25.z.enum(["red", "blue"]).optional()
+var schematicPathProps = import_zod26.z.object({
+  points: import_zod26.z.array(import_soup14.point),
+  isFilled: import_zod26.z.boolean().optional().default(false),
+  fillColor: import_zod26.z.enum(["red", "blue"]).optional()
 });
 var componentProps = commonComponentProps;
 var powerSourceProps = commonComponentProps.extend({
   voltage: import_soup14.voltage
 });
 var portProps = commonLayoutProps.extend({
-  name: import_zod25.z.string(),
-  pinNumber: import_zod25.z.number().optional(),
-  aliases: import_zod25.z.array(import_zod25.z.string()).optional(),
+  name: import_zod26.z.string(),
+  pinNumber: import_zod26.z.number().optional(),
+  aliases: import_zod26.z.array(import_zod26.z.string()).optional(),
   direction
 });
 var silkscreenTextProps = pcbLayoutProps.extend({
-  text: import_zod25.z.string(),
-  anchorAlignment: import_zod25.z.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  font: import_zod25.z.enum(["tscircuit2024"]).optional(),
+  text: import_zod26.z.string(),
+  anchorAlignment: import_zod26.z.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  font: import_zod26.z.enum(["tscircuit2024"]).optional(),
   fontSize: import_soup14.length.optional()
 });
 var silkscreenPathProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotation: true }).extend({
-  route: import_zod25.z.array(import_soup14.route_hint_point),
+  route: import_zod26.z.array(import_soup14.route_hint_point),
   strokeWidth: import_soup14.length.optional()
 });
 var silkscreenLineProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotation: true }).extend({
@@ -611,53 +634,55 @@ var silkscreenLineProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotat
   y2: import_soup14.distance
 });
 var silkscreenRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  isFilled: import_zod25.z.boolean().optional(),
-  isOutline: import_zod25.z.boolean().optional(),
+  isFilled: import_zod26.z.boolean().optional(),
+  isOutline: import_zod26.z.boolean().optional(),
   strokeWidth: import_soup14.distance.optional(),
   width: import_soup14.distance,
   height: import_soup14.distance
 });
 var silkscreenCircleProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  isFilled: import_zod25.z.boolean().optional(),
-  isOutline: import_zod25.z.boolean().optional(),
+  isFilled: import_zod26.z.boolean().optional(),
+  isOutline: import_zod26.z.boolean().optional(),
   strokeWidth: import_soup14.distance.optional(),
   radius: import_soup14.distance
 });
-var routeHintPointProps = import_zod25.z.object({
+var routeHintPointProps = import_zod26.z.object({
   x: import_soup14.distance,
   y: import_soup14.distance,
-  via: import_zod25.z.boolean().optional(),
+  via: import_zod26.z.boolean().optional(),
   toLayer: import_soup14.layer_ref.optional()
 });
-var traceHintProps = import_zod25.z.object({
-  for: import_zod25.z.string().optional().describe(
+var traceHintProps = import_zod26.z.object({
+  for: import_zod26.z.string().optional().describe(
     "Selector for the port you're targeting, not required if you're inside a trace"
   ),
-  order: import_zod25.z.number().optional(),
+  order: import_zod26.z.number().optional(),
   offset: import_soup14.route_hint_point.or(routeHintPointProps).optional(),
-  offsets: import_zod25.z.array(import_soup14.route_hint_point).or(import_zod25.z.array(routeHintPointProps)).optional(),
-  traceWidth: import_zod25.z.number().optional()
+  offsets: import_zod26.z.array(import_soup14.route_hint_point).or(import_zod26.z.array(routeHintPointProps)).optional(),
+  traceWidth: import_zod26.z.number().optional()
 });
-var pcbTraceProps = import_zod25.z.object({
-  layer: import_zod25.z.string().optional(),
+var pcbTraceProps = import_zod26.z.object({
+  layer: import_zod26.z.string().optional(),
   thickness: import_soup14.distance.optional(),
-  route: import_zod25.z.array(import_soup14.route_hint_point)
+  route: import_zod26.z.array(import_soup14.route_hint_point)
 });
 var fabricationNoteTextProps = pcbLayoutProps.extend({
-  text: import_zod25.z.string(),
-  anchorAlignment: import_zod25.z.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  font: import_zod25.z.enum(["tscircuit2024"]).optional(),
+  text: import_zod26.z.string(),
+  anchorAlignment: import_zod26.z.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  font: import_zod26.z.enum(["tscircuit2024"]).optional(),
   fontSize: import_soup14.length.optional(),
-  color: import_zod25.z.string().optional()
+  color: import_zod26.z.string().optional()
 });
 var fabricationNotePathProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotation: true }).extend({
-  route: import_zod25.z.array(import_soup14.route_hint_point),
+  route: import_zod26.z.array(import_soup14.route_hint_point),
   strokeWidth: import_soup14.length.optional(),
-  color: import_zod25.z.string().optional()
+  color: import_zod26.z.string().optional()
 });
 // Annotate the CommonJS export names for ESM import in node:
 0 && (module.exports = {
   baseGroupProps,
+  batteryPins,
+  batteryProps,
   boardProps,
   bugProps,
   cadModelBase,

package/dist/index.js.map

@@ -1 +1 @@
-{"version":3,"sources":["../lib/index.ts","../lib/typecheck.ts","../lib/common/direction.ts","../lib/common/portHints.ts","../lib/common/layout.ts","../lib/common/point3.ts","../lib/common/cadModel.ts","../lib/common/footprintProp.ts","../lib/common/schematicPinDefinitions.ts","../lib/common/schematicPinStyle.ts","../lib/components/board.ts","../lib/common/point.ts","../lib/components/chip.ts","../lib/components/jumper.ts","../lib/components/resistor.ts","../lib/components/capacitor.ts","../lib/components/group.ts","../lib/components/net.ts","../lib/components/constrainedlayout.ts","../lib/common/distance.ts","../lib/components/constraint.ts","../lib/components/smtpad.ts","../lib/components/solderpaste.ts","../lib/components/hole.ts","../lib/components/trace.ts","../lib/components/footprint.ts"],"sourcesContent":["/**\n * THINKING ABOUT ADDING SOMETHING TO THIS FILE?\n *\n * THINK AGAIN!\n *\n * This file is TOO BIG! Create files using the pattern in the surrounding\n * directories, then export from this file.\n */\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport {\n  type AnySoupElementInput,\n  capacitance,\n  distance,\n  inductance,\n  layer_ref,\n  length,\n  type PCBPlatedHoleInput,\n  type PCBSMTPadInput,\n  point,\n  resistance,\n  rotation,\n  route_hint_point,\n  supplier_name,\n  voltage,\n} from \"@tscircuit/soup\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\nimport { direction } from \"./common/direction\"\nimport { portHints } from \"./common/portHints\"\nimport {\n  commonComponentProps,\n  commonLayoutProps,\n  lrPins,\n  lrPolarPins,\n  pcbLayoutProps,\n} from \"./common/layout\"\nimport { explicitPinSideDefinition } from \"./common/schematicPinDefinitions\"\n\nexport * from \"./common/direction\"\nexport * from \"./common/portHints\"\nexport * from \"./common/layout\"\nexport * from \"./common/point3\"\nexport * from \"./common/portHints\"\nexport * from \"./common/footprintProp\"\nexport * from \"./common/schematicPinDefinitions\"\nexport * from \"./common/schematicPinStyle\"\nexport * from \"./common/cadModel\"\n\nexport * from \"./components/board\"\nexport * from \"./components/chip\"\nexport * from \"./components/jumper\"\n\nexport * from \"./components/resistor\"\nexport * from \"./components/capacitor\"\nexport * from \"./components/group\"\nexport * from \"./components/net\"\nexport * from \"./components/constrainedlayout\"\nexport * from \"./components/constraint\"\nexport * from \"./components/smtpad\"\nexport * from \"./components/solderpaste\"\nexport * from \"./components/hole\"\nexport * from \"./components/trace\"\nexport * from \"./components/footprint\"\n\nexport const inductorProps = commonComponentProps.extend({\n  inductance,\n})\nexport const inductorPins = lrPins\nexport type InductorProps = z.input<typeof inductorProps>\n\nexport const diodeProps = commonComponentProps.extend({})\nexport const diodePins = lrPolarPins\nexport type DiodeProps = z.input<typeof diodeProps>\n\nexport const ledProps = commonComponentProps.extend({\n  color: z.string().optional(),\n})\nexport const ledPins = lrPolarPins\nexport type LedProps = z.input<typeof ledProps>\n\nexport const switchProps = commonComponentProps.extend({\n  ftype: z.literal(\"switch\"),\n  switchType: z.enum([\"spst\"]).default(\"spst\"),\n  isNormallyClosed: z.boolean().default(false),\n})\nexport type SwitchProps = z.input<typeof switchProps>\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n\nexport const viaProps = commonLayoutProps.extend({\n  fromLayer: layer_ref,\n  toLayer: layer_ref,\n  holeDiameter: distance,\n  outerDiameter: distance,\n})\nexport type ViaProps = z.input<typeof viaProps>\n\nexport const netAliasProps = commonLayoutProps.extend({\n  net: z.string().optional(),\n})\nexport type NetAliasProps = z.input<typeof netAliasProps>\n\nexport const platedHoleProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"circle\"),\n    holeDiameter: distance,\n    outerDiameter: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"oval\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n])\nexport type PlatedHoleProps = z.input<typeof platedHoleProps>\n\nexport const pcbKeepoutProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  }),\n  pcbLayoutProps.extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  }),\n])\nexport type PcbKeepoutProps = z.input<typeof pcbKeepoutProps>\n\nexport const schematicBoxProps = z.object({\n  schX: distance,\n  schY: distance,\n  width: distance,\n  height: distance,\n})\nexport type SchematicBoxProps = z.input<typeof schematicBoxProps>\n\nexport const schematicTextProps = z.object({\n  schX: distance,\n  schY: distance,\n  text: z.string(),\n})\nexport type SchematicTextProps = z.input<typeof schematicTextProps>\n\nexport const schematicLineProps = z.object({\n  x1: distance,\n  y1: distance,\n  x2: distance,\n  y2: distance,\n})\nexport type SchematicLineProps = z.input<typeof schematicLineProps>\n\nexport const schematicPathProps = z.object({\n  points: z.array(point),\n  isFilled: z.boolean().optional().default(false),\n  fillColor: z.enum([\"red\", \"blue\"]).optional(),\n})\nexport type SchematicPathProps = z.input<typeof schematicPathProps>\n\nexport const componentProps = commonComponentProps\nexport type ComponentProps = z.input<typeof componentProps>\n\nexport const powerSourceProps = commonComponentProps.extend({\n  voltage,\n})\nexport type PowerSourceProps = z.input<typeof powerSourceProps>\n\nexport const portProps = commonLayoutProps.extend({\n  name: z.string(),\n  pinNumber: z.number().optional(),\n  aliases: z.array(z.string()).optional(),\n  direction: direction,\n})\nexport type PortProps = z.input<typeof portProps>\n\nexport const silkscreenTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type SilkscreenTextProps = z.input<typeof silkscreenTextProps>\n\nexport const silkscreenPathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type SilkscreenPathProps = z.input<typeof silkscreenPathProps>\n\nexport const silkscreenLineProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    strokeWidth: distance,\n    x1: distance,\n    y1: distance,\n    x2: distance,\n    y2: distance,\n  })\nexport type SilkscreenLineProps = z.input<typeof silkscreenLineProps>\n\nexport const silkscreenRectProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    width: distance,\n    height: distance,\n  })\nexport type SilkscreenRectProps = z.input<typeof silkscreenRectProps>\n\nexport const silkscreenCircleProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    radius: distance,\n  })\nexport type SilkscreenCircleProps = z.input<typeof silkscreenCircleProps>\n\nexport const routeHintPointProps = z.object({\n  x: distance,\n  y: distance,\n  via: z.boolean().optional(),\n  toLayer: layer_ref.optional(),\n})\n\nexport const traceHintProps = z.object({\n  for: z\n    .string()\n    .optional()\n    .describe(\n      \"Selector for the port you're targeting, not required if you're inside a trace\",\n    ),\n  order: z.number().optional(),\n  offset: route_hint_point.or(routeHintPointProps).optional(),\n  offsets: z\n    .array(route_hint_point)\n    .or(z.array(routeHintPointProps))\n    .optional(),\n  traceWidth: z.number().optional(),\n})\n\nexport type TraceHintProps = z.input<typeof traceHintProps>\n\nexport const pcbTraceProps = z.object({\n  layer: z.string().optional(),\n  thickness: distance.optional(),\n  route: z.array(route_hint_point),\n})\nexport type PcbTraceProps = z.input<typeof pcbTraceProps>\n\nexport const fabricationNoteTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n  color: z.string().optional(),\n})\nexport type FabricationNoteTextProps = z.input<typeof fabricationNoteTextProps>\n\nexport const fabricationNotePathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n    color: z.string().optional(),\n  })\nexport type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>\n","import type { TypeEqual } from \"ts-expect\"\n\nexport const expectTypesMatch = <const T1, const T2>(\n  shouldBe: TypeEqual<T1, T2>,\n): void => {}\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nexport const direction = z.enum([\"up\", \"down\", \"left\", \"right\"])\nexport type Direction = \"up\" | \"down\" | \"left\" | \"right\"\n\nexport type DirectionAlongEdge =\n  | \"top-to-bottom\"\n  | \"left-to-right\"\n  | \"bottom-to-top\"\n  | \"right-to-left\"\n\nexport const directionAlongEdge = z.enum([\n  \"top-to-bottom\",\n  \"left-to-right\",\n  \"bottom-to-top\",\n  \"right-to-left\",\n])\n\nexpectTypesMatch<Direction, z.infer<typeof direction>>(true)\nexpectTypesMatch<DirectionAlongEdge, z.infer<typeof directionAlongEdge>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const portHints = z.array(z.string().or(z.number()))\nexport type PortHints = (string | number)[]\n\nexpectTypesMatch<PortHints, z.infer<typeof portHints>>(true)\n","import { z } from \"zod\"\nimport {\n  type AnySoupElementInput,\n  distance,\n  layer_ref,\n  type LayerRef,\n  type LayerRefInput,\n  rotation,\n  supplier_name,\n} from \"@tscircuit/soup\"\nimport { point3 } from \"./point3\"\nimport {\n  cadModelJscad,\n  cadModelObj,\n  cadModelProp,\n  cadModelStl,\n  type CadModelJscad,\n  type CadModelObj,\n  type CadModelProp,\n  type CadModelStl,\n} from \"./cadModel\"\nimport { footprintProp, type Footprint } from \"./footprintProp\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface PcbLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n  layer?: LayerRefInput\n}\n\nexport interface CommonLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n\n  schX?: string | number\n  schY?: string | number\n  schRotation?: string | number\n\n  layer?: LayerRefInput\n  footprint?: Footprint\n}\n\nexport const pcbLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n})\ntype InferredPcbLayoutProps = z.input<typeof pcbLayoutProps>\nexpectTypesMatch<PcbLayoutProps, InferredPcbLayoutProps>(true)\n\nexport const commonLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n  footprint: footprintProp.optional(),\n})\n\ntype InferredCommonLayoutProps = z.input<typeof commonLayoutProps>\nexpectTypesMatch<CommonLayoutProps, InferredCommonLayoutProps>(true)\n\nexport type SupplierName =\n  | \"jlcpcb\"\n  | \"macrofab\"\n  | \"pcbway\"\n  | \"digikey\"\n  | \"mouser\"\n  | \"lcsc\"\nexport interface SupplierProps {\n  supplierPartNumbers?: { [k in SupplierName]?: string[] }\n}\nexport const supplierProps = z.object({\n  supplierPartNumbers: z.record(supplier_name, z.array(z.string())).optional(),\n})\n\nexpectTypesMatch<SupplierProps, z.input<typeof supplierProps>>(true)\n\nexport interface CommonComponentProps extends CommonLayoutProps {\n  key?: any\n  name: string\n  supplierPartNumbers?: SupplierProps[\"supplierPartNumbers\"]\n  cadModel?: CadModelProp\n  children?: any\n  symbolName?: string\n}\n\nexport const commonComponentProps = commonLayoutProps\n  .merge(supplierProps)\n  .extend({\n    key: z.any().optional(),\n    name: z.string(),\n    cadModel: cadModelProp.optional(),\n    children: z.any().optional(),\n    symbolName: z.string().optional(),\n  })\n\ntype InferredCommonComponentProps = z.input<typeof commonComponentProps>\nexpectTypesMatch<CommonComponentProps, InferredCommonComponentProps>(true)\n\nexport const lrPins = [\"pin1\", \"left\", \"pin2\", \"right\"] as const\nexport const lrPolarPins = [\n  \"pin1\",\n  \"left\",\n  \"anode\",\n  \"pos\",\n  \"pin2\",\n  \"right\",\n  \"cathode\",\n  \"neg\",\n] as const\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n","import { distance } from \"@tscircuit/soup\"\nimport { z } from \"zod\"\n\nexport const point3 = z.object({\n  x: distance,\n  y: distance,\n  z: distance,\n})\n","import { z } from \"zod\"\nimport { point3 } from \"./point3\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const rotationPoint3 = z.object({\n  x: z.union([z.number(), z.string()]),\n  y: z.union([z.number(), z.string()]),\n  z: z.union([z.number(), z.string()]),\n})\n\nexport interface CadModelBase {\n  rotationOffset?:\n    | number\n    | { x: number | string; y: number | string; z: number | string }\n  positionOffset?: {\n    x: number | string\n    y: number | string\n    z: number | string\n  }\n  size?: { x: number | string; y: number | string; z: number | string }\n}\n\nexport const cadModelBase = z.object({\n  rotationOffset: z.number().or(rotationPoint3).optional(),\n  positionOffset: point3.optional(),\n  size: point3.optional(),\n})\n\nexpectTypesMatch<CadModelBase, z.input<typeof cadModelBase>>(true)\n\nexport interface CadModelStl extends CadModelBase {\n  stlUrl: string\n}\nexport const cadModelStl = cadModelBase.extend({\n  stlUrl: z.string(),\n})\n\nexport interface CadModelObj extends CadModelBase {\n  objUrl: string\n  mtlUrl?: string\n}\nexport const cadModelObj = cadModelBase.extend({\n  objUrl: z.string(),\n  mtlUrl: z.string().optional(),\n})\n\nexport interface CadModelJscad extends CadModelBase {\n  jscad: Record<string, any>\n}\nexport const cadModelJscad = cadModelBase.extend({\n  jscad: z.record(z.any()),\n})\n\nexport type CadModelProp = string | CadModelStl | CadModelObj | CadModelJscad\n\nexport const cadModelProp = z.union([\n  z.string(),\n  cadModelStl,\n  cadModelObj,\n  cadModelJscad,\n])\n\ntype InferredCadModelProp = z.input<typeof cadModelProp>\nexpectTypesMatch<CadModelProp, InferredCadModelProp>(true)\n","import type { LayerRef } from \"@tscircuit/soup\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\n\n/**\n * This is an abbreviated definition of the soup elements that you can find here:\n * https://docs.tscircuit.com/api-reference/advanced/soup#pcb-smtpad\n */\nexport type FootprintSoupElements = {\n  type: \"pcb_smtpad\" | \"pcb_plated_hole\"\n  x: string | number\n  y: string | number\n  layer?: LayerRef\n  holeDiameter?: string | number\n  outerDiameter?: string | number\n  shape?: \"circle\" | \"rect\"\n  width?: string | number\n  height?: string | number\n  portHints?: string[]\n}\n\nexport type Footprint = string | ReactElement | FootprintSoupElements[]\nexport const footprintProp = z.custom<Footprint>((v) => true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\n/**\n * @deprecated Use SchematicPortArrangementWithPinCounts instead.\n */\nexport interface SchematicPortArrangementWithSizes {\n  leftSize?: number\n  topSize?: number\n  rightSize?: number\n  bottomSize?: number\n}\n\n/**\n * Specifies the number of pins on each side of the schematic box component.\n */\nexport interface SchematicPortArrangementWithPinCounts {\n  leftPinCount?: number\n  topPinCount?: number\n  rightPinCount?: number\n  bottomPinCount?: number\n}\n\nexport interface PinSideDefinition {\n  pins: number[]\n  direction:\n    | \"top-to-bottom\"\n    | \"left-to-right\"\n    | \"bottom-to-top\"\n    | \"right-to-left\"\n}\n\nexport interface SchematicPortArrangementWithSides {\n  leftSide?: PinSideDefinition\n  topSide?: PinSideDefinition\n  rightSide?: PinSideDefinition\n  bottomSide?: PinSideDefinition\n}\n\nexport interface SchematicPortArrangement\n  extends SchematicPortArrangementWithSizes,\n    SchematicPortArrangementWithSides,\n    SchematicPortArrangementWithPinCounts {}\n\nexport const explicitPinSideDefinition = z.object({\n  pins: z.array(z.number()),\n  direction: z.union([\n    z.literal(\"top-to-bottom\"),\n    z.literal(\"left-to-right\"),\n    z.literal(\"bottom-to-top\"),\n    z.literal(\"right-to-left\"),\n  ]),\n})\n\nexport const schematicPortArrangement = z.object({\n  leftSize: z.number().optional().describe(\"@deprecated, use leftPinCount\"),\n  topSize: z.number().optional().describe(\"@deprecated, use topPinCount\"),\n  rightSize: z.number().optional().describe(\"@deprecated, use rightPinCount\"),\n  bottomSize: z.number().optional().describe(\"@deprecated, use bottomPinCount\"),\n  leftPinCount: z.number().optional(),\n  rightPinCount: z.number().optional(),\n  topPinCount: z.number().optional(),\n  bottomPinCount: z.number().optional(),\n  leftSide: explicitPinSideDefinition.optional(),\n  rightSide: explicitPinSideDefinition.optional(),\n  topSide: explicitPinSideDefinition.optional(),\n  bottomSide: explicitPinSideDefinition.optional(),\n})\n\nexpectTypesMatch<\n  SchematicPortArrangement,\n  z.input<typeof schematicPortArrangement>\n>(true)\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type SchematicPinStyle = Record<\n  string,\n  {\n    leftMargin?: number | string\n    rightMargin?: number | string\n    topMargin?: number | string\n    bottomMargin?: number | string\n  }\n>\n\nexport const schematicPinStyle = z.record(\n  z.object({\n    leftMargin: distance.optional(),\n    rightMargin: distance.optional(),\n    topMargin: distance.optional(),\n    bottomMargin: distance.optional(),\n  }),\n)\n\nexpectTypesMatch<SchematicPinStyle, z.input<typeof schematicPinStyle>>(true)\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { point, type Point } from \"lib/common/point\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport type { SubcircuitGroupProps } from \"./group\"\nimport type { Distance } from \"lib/common/distance\"\n\nexport interface BoardProps {\n  width?: number | string\n  height?: number | string\n  outline?: Point[]\n  pcbX?: number | string\n  pcbY?: number | string\n  layout?: any\n  routingDisabled?: boolean\n  children?: any\n  defaultTraceWidth?: Distance\n}\n\nexport const boardProps = z.object({\n  width: distance.optional(),\n  height: distance.optional(),\n  outline: z.array(point).optional(),\n  pcbX: distance.optional().default(0),\n  pcbY: distance.optional().default(0),\n  layout: z.any().optional(),\n  routingDisabled: z.boolean().optional(),\n  children: z.any(),\n  defaultTraceWidth: distance.optional(),\n})\n\nexpectTypesMatch<BoardProps, z.input<typeof boardProps>>(true)\n","import { distance } from \"@tscircuit/soup\"\nimport { z } from \"zod\"\n\nexport const point = z.object({\n  x: distance,\n  y: distance,\n})\n\nexport type Point = { x: number | string; y: number | string }\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  schematicPortArrangement,\n  type SchematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  schematicPinStyle,\n  type SchematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport type { Distance } from \"lib/common/distance\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface ChipProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | string[]>\n  schPortArrangement?: SchematicPortArrangement\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: Distance\n  schWidth?: Distance\n  schHeight?: Distance\n}\n\nexport const chipProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(z.number().or(z.string()), z.string().or(z.array(z.string())))\n    .optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n})\n\n/**\n * @deprecated Use ChipProps instead.\n */\nexport const bugProps = chipProps\nexport type InferredChipProps = z.input<typeof chipProps>\n\nexpectTypesMatch<InferredChipProps, ChipProps>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  schematicPinStyle,\n  type SchematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { distance } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport {\n  schematicPortArrangement,\n  type SchematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\n\nexport interface JumperProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string>\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: number | string\n  schWidth?: number | string\n  schHeight?: number | string\n  schDirection?: \"left\" | \"right\"\n  schPortArrangement?: SchematicPortArrangement\n}\n\nexport const jumperProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z.record(z.number().or(z.string()), z.string()).optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  schDirection: z.enum([\"left\", \"right\"]).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n})\n\ntype InferredJumperProps = z.input<typeof jumperProps>\nexpectTypesMatch<JumperProps, InferredJumperProps>(true)\n","import { z } from \"zod\"\nimport { resistance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  lrPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface ResistorProps extends CommonComponentProps {\n  resistance: number | string\n  pullupFor?: string\n  pullupTo?: string\n  pulldownFor?: string\n  pulldownTo?: string\n}\n\nexport const resistorProps = commonComponentProps.extend({\n  resistance,\n\n  pullupFor: z.string().optional(),\n  pullupTo: z.string().optional(),\n\n  pulldownFor: z.string().optional(),\n  pulldownTo: z.string().optional(),\n})\nexport const resistorPins = lrPins\n\ntype InferredResistorProps = z.input<typeof resistorProps>\nexpectTypesMatch<ResistorProps, InferredResistorProps>(true)\n","import { z } from \"zod\"\nimport { capacitance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface CapacitorProps extends CommonComponentProps {\n  capacitance: number | string\n\n  decouplingFor?: string\n  decouplingTo?: string\n\n  bypassFor?: string\n  bypassTo?: string\n}\n\nexport const capacitorProps = commonComponentProps.extend({\n  capacitance,\n\n  decouplingFor: z.string().optional(),\n  decouplingTo: z.string().optional(),\n\n  bypassFor: z.string().optional(),\n  bypassTo: z.string().optional(),\n})\nexport const capacitorPins = lrPolarPins\n\nexpectTypesMatch<CapacitorProps, z.input<typeof capacitorProps>>(true)\n","import { z } from \"zod\"\nimport { commonLayoutProps, type CommonLayoutProps } from \"lib/common/layout\"\nimport { length } from \"@tscircuit/soup\"\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\n\nexport interface BaseGroupProps extends CommonLayoutProps {\n  name?: string\n  children?: any\n}\n\nexport interface SubcircuitGroupProps extends BaseGroupProps {\n  subcircuit: true\n  layout?: LayoutBuilder\n  routingDisabled?: boolean\n  defaultTraceWidth?: Distance\n}\n\nexport type GroupProps = SubcircuitGroupProps | BaseGroupProps\n\nexport const baseGroupProps = commonLayoutProps.extend({\n  name: z.string().optional(),\n  children: z.any().optional(),\n})\n\nexport const subcircuitGroupProps = baseGroupProps.extend({\n  subcircuit: z.literal(true),\n  layout: z.custom<LayoutBuilder>((v) => true).optional(),\n  routingDisabled: z.boolean().optional(),\n  defaultTraceWidth: length.optional(),\n})\n\nexport const groupProps = z.union([baseGroupProps, subcircuitGroupProps])\n\ntype InferredBaseGroupProps = z.input<typeof baseGroupProps>\ntype InferredSubcircuitGroupProps = z.input<typeof subcircuitGroupProps>\n\nexpectTypesMatch<BaseGroupProps, InferredBaseGroupProps>(true)\nexpectTypesMatch<SubcircuitGroupProps, InferredSubcircuitGroupProps>(true)\n\ntype InferredGroupProps = z.input<typeof groupProps>\nexpectTypesMatch<GroupProps, InferredGroupProps>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface NetProps {\n  name: string\n}\n\nexport const netProps = z.object({\n  name: z.string(),\n})\n\ntype InferredNetProps = z.input<typeof netProps>\nexpectTypesMatch<NetProps, InferredNetProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ConstrainedLayoutProps {\n  name?: string\n  pcbOnly?: boolean\n  schOnly?: boolean\n}\n\nexport const constrainedLayoutProps = z.object({\n  name: z.string().optional(),\n  pcbOnly: z.boolean().optional(),\n  schOnly: z.boolean().optional(),\n})\n\nexport type InferredConstrainedLayoutProps = z.input<\n  typeof constrainedLayoutProps\n>\n\nexpectTypesMatch<InferredConstrainedLayoutProps, ConstrainedLayoutProps>(true)\n","import { z } from \"zod\"\n\nexport type Distance = number | string\n\nexport { distance, length } from \"@tscircuit/soup\"\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\nimport { distance } from \"lib/common/distance\"\nimport { z } from \"zod\"\n\nexport type PcbXDistConstraint = {\n  pcb?: true\n  xDist: Distance\n\n  /**\n   * Selector for left component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  left: string\n\n  /**\n   * Selector for right component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  right: string\n\n  /**\n   * If true, the provided distance is the distance between the closest edges of\n   * the left and right components\n   */\n  edgeToEdge?: true\n\n  /**\n   * If true, the provided distance is the distance between the centers of the\n   * left and right components\n   */\n  centerToCenter?: true\n}\n\nexport type PcbYDistConstraint = {\n  pcb?: true\n  yDist: Distance\n\n  /**\n   * Selector for top component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 topedge\", \".R1 center\"\n   */\n  top: string\n\n  /**\n   * Selector for bottom component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 bottomedge\", \".R1 center\"\n   */\n  bottom: string\n\n  edgeToEdge?: true\n  centerToCenter?: true\n}\n\nexport type PcbSameYConstraint = {\n  pcb?: true\n  sameY?: true\n\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type PcbSameXConstraint = {\n  pcb?: true\n  sameX?: true\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type ConstraintProps =\n  | PcbXDistConstraint\n  | PcbYDistConstraint\n  | PcbSameYConstraint\n  | PcbSameXConstraint\n\n// -----------------------------------------------------------------------------\n// Zod\n// -----------------------------------------------------------------------------\n\nexport const pcbXDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  xDist: distance,\n  left: z.string(),\n  right: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbXDistConstraint, z.input<typeof pcbXDistConstraintProps>>(\n  true,\n)\n\nexport const pcbYDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  yDist: distance,\n  top: z.string(),\n  bottom: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbYDistConstraint, z.input<typeof pcbYDistConstraintProps>>(\n  true,\n)\n\nexport const pcbSameYConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameY: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameYConstraint, z.input<typeof pcbSameYConstraintProps>>(\n  true,\n)\n\nexport const pcbSameXConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameX: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameXConstraint, z.input<typeof pcbSameXConstraintProps>>(\n  true,\n)\n\nexport const constraintProps = z.union([\n  pcbXDistConstraintProps,\n  pcbYDistConstraintProps,\n  pcbSameYConstraintProps,\n  pcbSameXConstraintProps,\n])\n\nexpectTypesMatch<ConstraintProps, z.input<typeof constraintProps>>(true)\n","import {\n  pcbLayoutProps,\n  type CommonLayoutProps,\n  type PcbLayoutProps,\n} from \"lib/common/layout\"\nimport { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { portHints, type PortHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n  portHints?: PortHints\n}\n\nexport interface CircleSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport type SmtPadProps = RectSmtPadProps | CircleSmtPadProps\n\n// ----------------------------------------------------------------------------\n// Zod\n// ----------------------------------------------------------------------------\n\nexport const rectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredRectSmtPadProps = z.input<typeof rectSmtPadProps>\nexpectTypesMatch<InferredRectSmtPadProps, RectSmtPadProps>(true)\n\nexport const circleSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredCircleSmtPadProps = z.input<typeof circleSmtPadProps>\nexpectTypesMatch<InferredCircleSmtPadProps, CircleSmtPadProps>(true)\n\nexport const smtPadProps = z.union([circleSmtPadProps, rectSmtPadProps])\n\nexport type InferredSmtPadProps = z.input<typeof smtPadProps>\nexpectTypesMatch<InferredSmtPadProps, SmtPadProps>(true)\n","import { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { boolean, string, z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n}\n\nexport interface CircleSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n}\n\nexport type SolderPasteProps = RectSolderPasteProps | CircleSolderPasteProps\n\n// zod\n\nexport const rectSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  })\ntype InferredRectSolderPasteProps = z.input<typeof rectSolderPasteProps>\nexpectTypesMatch<InferredRectSolderPasteProps, RectSolderPasteProps>(true)\n\nexport const circleSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  })\ntype InferredCircleSolderPasteProps = z.input<typeof circleSolderPasteProps>\nexpectTypesMatch<InferredCircleSolderPasteProps, CircleSolderPasteProps>(true)\n\nexport const solderPasteProps = z.union([\n  circleSolderPasteProps,\n  rectSolderPasteProps,\n])\n\nexport type InferredSolderPasteProps = z.input<typeof solderPasteProps>\nexpectTypesMatch<InferredSolderPasteProps, SolderPasteProps>(true)\n","import { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface HoleProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  name?: string\n  diameter?: Distance\n  radius?: Distance\n}\n\nexport const holeProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    name: z.string().optional(),\n    diameter: distance.optional(),\n    radius: distance.optional(),\n  })\n  .transform((d) => ({\n    ...d,\n    diameter: d.diameter ?? 2 * d.radius!,\n    radius: d.radius ?? d.diameter! / 2,\n  }))\n\nexport type InferredHoleProps = z.input<typeof holeProps>\n\nexpectTypesMatch<HoleProps, InferredHoleProps>(true)\n","import { z } from \"zod\"\nimport { distance, route_hint_point } from \"@tscircuit/soup\"\nimport { point } from \"../common/point\"\n\nexport const portRef = z.union([\n  z.string(),\n  z.custom<{ getPortSelector: () => string }>((v) =>\n    Boolean(v.getPortSelector),\n  ),\n])\n\nconst baseTraceProps = z.object({\n  key: z.string().optional(),\n  thickness: distance.optional(),\n  schematicRouteHints: z.array(point).optional(),\n  pcbRouteHints: z.array(route_hint_point).optional(),\n})\n\nexport const traceProps = z.union([\n  baseTraceProps.extend({\n    path: z.array(portRef),\n  }),\n  baseTraceProps.extend({\n    from: portRef,\n    to: portRef,\n  }),\n])\n\nexport type TraceProps = z.input<typeof traceProps>\n","import { layer_ref, type LayerRef } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface FootprintProps {\n  /**\n   * The layer that the footprint is designed for. If you set this to \"top\"\n   * then it means the children were intended to represent the top layer. If\n   * the <chip /> with this footprint is moved to the bottom layer, then the\n   * components will be mirrored.\n   *\n   * Generally, you shouldn't set this except where it can help prevent\n   * confusion because you have a complex multi-layer footprint. Default is\n   * \"top\" and this is most intuitive.\n   */\n  originalLayer?: LayerRef\n}\n\nexport const footprintProps = z.object({\n  originalLayer: layer_ref.default(\"top\").optional(),\n})\n\nexport type FootprintPropsInput = z.input<typeof footprintProps>\ntype InferredFootprintProps = z.infer<typeof footprintProps>\nexpectTypesMatch<InferredFootprintProps, FootprintProps>(true)\n"],"mappings":";;;;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,8BAAAA;AAAA,EAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AASA,IAAAC,gBAeO;AAEP,IAAAC,eAAkB;;;ACxBX,IAAM,mBAAmB,CAC9B,aACS;AAAC;;;ACHZ,iBAAkB;AACX,IAAM,YAAY,aAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC;AASxD,IAAM,qBAAqB,aAAE,KAAK;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAuD,IAAI;AAC3D,iBAAyE,IAAI;;;ACnB7E,IAAAC,cAAkB;AAGX,IAAM,YAAY,cAAE,MAAM,cAAE,OAAO,EAAE,GAAG,cAAE,OAAO,CAAC,CAAC;AAG1D,iBAAuD,IAAI;;;ACN3D,IAAAC,cAAkB;AAClB,IAAAC,eAQO;;;ACTP,kBAAyB;AACzB,IAAAC,cAAkB;AAEX,IAAM,SAAS,cAAE,OAAO;AAAA,EAC7B,GAAG;AAAA,EACH,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ACPD,IAAAC,cAAkB;AAIX,IAAM,iBAAiB,cAAE,OAAO;AAAA,EACrC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AACrC,CAAC;AAcM,IAAM,eAAe,cAAE,OAAO;AAAA,EACnC,gBAAgB,cAAE,OAAO,EAAE,GAAG,cAAc,EAAE,SAAS;AAAA,EACvD,gBAAgB,OAAO,SAAS;AAAA,EAChC,MAAM,OAAO,SAAS;AACxB,CAAC;AAED,iBAA6D,IAAI;AAK1D,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQ,cAAE,OAAO;AACnB,CAAC;AAMM,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQ,cAAE,OAAO;AAAA,EACjB,QAAQ,cAAE,OAAO,EAAE,SAAS;AAC9B,CAAC;AAKM,IAAM,gBAAgB,aAAa,OAAO;AAAA,EAC/C,OAAO,cAAE,OAAO,cAAE,IAAI,CAAC;AACzB,CAAC;AAIM,IAAM,eAAe,cAAE,MAAM;AAAA,EAClC,cAAE,OAAO;AAAA,EACT;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAqD,IAAI;;;AC7DzD,IAAAC,cAAkB;AAoBX,IAAM,gBAAgB,cAAE,OAAkB,CAAC,MAAM,IAAI;;;AHsBrD,IAAM,iBAAiB,cAAE,OAAO;AAAA,EACrC,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,OAAO,uBAAU,SAAS;AAC5B,CAAC;AAED,iBAAyD,IAAI;AAEtD,IAAM,oBAAoB,cAAE,OAAO;AAAA,EACxC,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,OAAO,uBAAU,SAAS;AAAA,EAC1B,WAAW,cAAc,SAAS;AACpC,CAAC;AAGD,iBAA+D,IAAI;AAY5D,IAAM,gBAAgB,cAAE,OAAO;AAAA,EACpC,qBAAqB,cAAE,OAAO,4BAAe,cAAE,MAAM,cAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAC7E,CAAC;AAED,iBAA+D,IAAI;AAW5D,IAAM,uBAAuB,kBACjC,MAAM,aAAa,EACnB,OAAO;AAAA,EACN,KAAK,cAAE,IAAI,EAAE,SAAS;AAAA,EACtB,MAAM,cAAE,OAAO;AAAA,EACf,UAAU,aAAa,SAAS;AAAA,EAChC,UAAU,cAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,YAAY,cAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAGH,iBAAqE,IAAI;AAElE,IAAM,SAAS,CAAC,QAAQ,QAAQ,QAAQ,OAAO;AAC/C,IAAM,cAAc;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAEO,IAAM,uBAAuB,sBAAS,GAAG,cAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;;;AIpH1E,IAAAC,cAAkB;AA2CX,IAAM,4BAA4B,cAAE,OAAO;AAAA,EAChD,MAAM,cAAE,MAAM,cAAE,OAAO,CAAC;AAAA,EACxB,WAAW,cAAE,MAAM;AAAA,IACjB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,EAC3B,CAAC;AACH,CAAC;AAEM,IAAM,2BAA2B,cAAE,OAAO;AAAA,EAC/C,UAAU,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,+BAA+B;AAAA,EACxE,SAAS,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,8BAA8B;AAAA,EACtE,WAAW,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,gCAAgC;AAAA,EAC1E,YAAY,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,iCAAiC;AAAA,EAC5E,cAAc,cAAE,OAAO,EAAE,SAAS;AAAA,EAClC,eAAe,cAAE,OAAO,EAAE,SAAS;AAAA,EACnC,aAAa,cAAE,OAAO,EAAE,SAAS;AAAA,EACjC,gBAAgB,cAAE,OAAO,EAAE,SAAS;AAAA,EACpC,UAAU,0BAA0B,SAAS;AAAA,EAC7C,WAAW,0BAA0B,SAAS;AAAA,EAC9C,SAAS,0BAA0B,SAAS;AAAA,EAC5C,YAAY,0BAA0B,SAAS;AACjD,CAAC;AAED,iBAGE,IAAI;;;ACxEN,IAAAC,cAAkB;AAClB,IAAAC,eAAyB;AAalB,IAAM,oBAAoB,cAAE;AAAA,EACjC,cAAE,OAAO;AAAA,IACP,YAAY,sBAAS,SAAS;AAAA,IAC9B,aAAa,sBAAS,SAAS;AAAA,IAC/B,WAAW,sBAAS,SAAS;AAAA,IAC7B,cAAc,sBAAS,SAAS;AAAA,EAClC,CAAC;AACH;AAEA,iBAAuE,IAAI;;;ACvB3E,IAAAC,eAAkB;AAClB,IAAAC,eAAyB;;;ACDzB,IAAAC,eAAyB;AACzB,IAAAC,cAAkB;AAEX,IAAM,QAAQ,cAAE,OAAO;AAAA,EAC5B,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ADaM,IAAM,aAAa,eAAE,OAAO;AAAA,EACjC,OAAO,sBAAS,SAAS;AAAA,EACzB,QAAQ,sBAAS,SAAS;AAAA,EAC1B,SAAS,eAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EACjC,MAAM,sBAAS,SAAS,EAAE,QAAQ,CAAC;AAAA,EACnC,MAAM,sBAAS,SAAS,EAAE,QAAQ,CAAC;AAAA,EACnC,QAAQ,eAAE,IAAI,EAAE,SAAS;AAAA,EACzB,iBAAiB,eAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,UAAU,eAAE,IAAI;AAAA,EAChB,mBAAmB,sBAAS,SAAS;AACvC,CAAC;AAED,iBAAyD,IAAI;;;AE/B7D,IAAAC,eAAkB;AAClB,IAAAC,eAAyB;AA0BlB,IAAM,YAAY,qBAAqB,OAAO;AAAA,EACnD,wBAAwB,eAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,eACR,OAAO,eAAE,OAAO,EAAE,GAAG,eAAE,OAAO,CAAC,GAAG,eAAE,OAAO,EAAE,GAAG,eAAE,MAAM,eAAE,OAAO,CAAC,CAAC,CAAC,EACpE,SAAS;AAAA,EACZ,oBAAoB,yBAAyB,SAAS;AAAA,EACtD,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAe,sBAAS,SAAS;AAAA,EACjC,UAAU,sBAAS,SAAS;AAAA,EAC5B,WAAW,sBAAS,SAAS;AAC/B,CAAC;AAKM,IAAM,WAAW;AAGxB,iBAA+C,IAAI;;;AC7CnD,IAAAC,eAAkB;AASlB,IAAAC,eAAyB;AAkBlB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,wBAAwB,eAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,eAAE,OAAO,eAAE,OAAO,EAAE,GAAG,eAAE,OAAO,CAAC,GAAG,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACpE,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAe,sBAAS,SAAS;AAAA,EACjC,UAAU,sBAAS,SAAS;AAAA,EAC5B,WAAW,sBAAS,SAAS;AAAA,EAC7B,cAAc,eAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACjD,oBAAoB,yBAAyB,SAAS;AACxD,CAAC;AAGD,iBAAmD,IAAI;;;ACvCvD,IAAAC,eAAkB;AAClB,IAAAC,eAA2B;AAgBpB,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AAAA,EAEA,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAU,eAAE,OAAO,EAAE,SAAS;AAAA,EAE9B,aAAa,eAAE,OAAO,EAAE,SAAS;AAAA,EACjC,YAAY,eAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AACM,IAAM,eAAe;AAG5B,iBAAuD,IAAI;;;AC7B3D,IAAAC,eAAkB;AAClB,IAAAC,eAA4B;AAmBrB,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD;AAAA,EAEA,eAAe,eAAE,OAAO,EAAE,SAAS;AAAA,EACnC,cAAc,eAAE,OAAO,EAAE,SAAS;AAAA,EAElC,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAU,eAAE,OAAO,EAAE,SAAS;AAChC,CAAC;AACM,IAAM,gBAAgB;AAE7B,iBAAiE,IAAI;;;AC/BrE,IAAAC,eAAkB;AAElB,IAAAC,gBAAuB;AAmBhB,IAAM,iBAAiB,kBAAkB,OAAO;AAAA,EACrD,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAU,eAAE,IAAI,EAAE,SAAS;AAC7B,CAAC;AAEM,IAAM,uBAAuB,eAAe,OAAO;AAAA,EACxD,YAAY,eAAE,QAAQ,IAAI;AAAA,EAC1B,QAAQ,eAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACtD,iBAAiB,eAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,mBAAmB,qBAAO,SAAS;AACrC,CAAC;AAEM,IAAM,aAAa,eAAE,MAAM,CAAC,gBAAgB,oBAAoB,CAAC;AAKxE,iBAAyD,IAAI;AAC7D,iBAAqE,IAAI;AAGzE,iBAAiD,IAAI;;;AC1CrD,IAAAC,eAAkB;AAOX,IAAM,WAAW,eAAE,OAAO;AAAA,EAC/B,MAAM,eAAE,OAAO;AACjB,CAAC;AAGD,iBAA6C,IAAI;;;ACXjD,IAAAC,eAAkB;AAQX,IAAM,yBAAyB,eAAE,OAAO;AAAA,EAC7C,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,SAAS,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC9B,SAAS,eAAE,QAAQ,EAAE,SAAS;AAChC,CAAC;AAMD,iBAAyE,IAAI;;;ACnB7E,IAAAC,eAAkB;AAIlB,IAAAC,gBAAiC;;;ACDjC,IAAAC,eAAkB;AAkFX,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO;AAAA,EACP,MAAM,eAAE,OAAO;AAAA,EACf,OAAO,eAAE,OAAO;AAAA,EAEhB,YAAY,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgB,eAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO;AAAA,EACP,KAAK,eAAE,OAAO;AAAA,EACd,QAAQ,eAAE,OAAO;AAAA,EAEjB,YAAY,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgB,eAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAK,eAAE,MAAM,eAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAK,eAAE,MAAM,eAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAmE,IAAI;;;ACnIvE,IAAAC,eAAkB;AAwBX,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,MAAM;AAAA,EACvB,OAAO;AAAA,EACP,QAAQ;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,oBAAoB,eAC9B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQ;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA+D,IAAI;AAE5D,IAAM,cAAc,eAAE,MAAM,CAAC,mBAAmB,eAAe,CAAC;AAGvE,iBAAmD,IAAI;;;ACnDvD,IAAAC,eAAmC;AAoB5B,IAAM,uBAAuB,eACjC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,MAAM;AAAA,EACvB,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAEH,iBAAqE,IAAI;AAElE,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQ;AACV,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,mBAAmB,eAAE,MAAM;AAAA,EACtC;AAAA,EACA;AACF,CAAC;AAGD,iBAA6D,IAAI;;;AC/CjE,IAAAC,eAAkB;AAWX,IAAM,YAAY,eACtB,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAU,uBAAS,SAAS;AAAA,EAC5B,QAAQ,uBAAS,SAAS;AAC5B,CAAC,EACA,UAAU,CAAC,OAAO;AAAA,EACjB,GAAG;AAAA,EACH,UAAU,EAAE,YAAY,IAAI,EAAE;AAAA,EAC9B,QAAQ,EAAE,UAAU,EAAE,WAAY;AACpC,EAAE;AAIJ,iBAA+C,IAAI;;;AC1BnD,IAAAC,eAAkB;AAClB,IAAAC,gBAA2C;AAGpC,IAAM,UAAU,eAAE,MAAM;AAAA,EAC7B,eAAE,OAAO;AAAA,EACT,eAAE;AAAA,IAA0C,CAAC,MAC3C,QAAQ,EAAE,eAAe;AAAA,EAC3B;AACF,CAAC;AAED,IAAM,iBAAiB,eAAE,OAAO;AAAA,EAC9B,KAAK,eAAE,OAAO,EAAE,SAAS;AAAA,EACzB,WAAW,uBAAS,SAAS;AAAA,EAC7B,qBAAqB,eAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EAC7C,eAAe,eAAE,MAAM,8BAAgB,EAAE,SAAS;AACpD,CAAC;AAEM,IAAM,aAAa,eAAE,MAAM;AAAA,EAChC,eAAe,OAAO;AAAA,IACpB,MAAM,eAAE,MAAM,OAAO;AAAA,EACvB,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,MAAM;AAAA,IACN,IAAI;AAAA,EACN,CAAC;AACH,CAAC;;;AC1BD,IAAAC,gBAAyC;AAEzC,IAAAC,eAAkB;AAgBX,IAAM,iBAAiB,eAAE,OAAO;AAAA,EACrC,eAAe,wBAAU,QAAQ,KAAK,EAAE,SAAS;AACnD,CAAC;AAID,iBAAyD,IAAI;;;AzBwCtD,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AACF,CAAC;AACM,IAAM,eAAe;AAGrB,IAAM,aAAa,qBAAqB,OAAO,CAAC,CAAC;AACjD,IAAM,YAAY;AAGlB,IAAM,WAAW,qBAAqB,OAAO;AAAA,EAClD,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AACM,IAAM,UAAU;AAGhB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,YAAY,eAAE,KAAK,CAAC,MAAM,CAAC,EAAE,QAAQ,MAAM;AAAA,EAC3C,kBAAkB,eAAE,QAAQ,EAAE,QAAQ,KAAK;AAC7C,CAAC;AAGM,IAAMC,wBAAuB,uBAAS,GAAG,eAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;AAEnE,IAAM,WAAW,kBAAkB,OAAO;AAAA,EAC/C,WAAW;AAAA,EACX,SAAS;AAAA,EACT,cAAc;AAAA,EACd,eAAe;AACjB,CAAC;AAGM,IAAM,gBAAgB,kBAAkB,OAAO;AAAA,EACpD,KAAK,eAAE,OAAO,EAAE,SAAS;AAC3B,CAAC;AAGM,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAO,eAAE,QAAQ,QAAQ;AAAA,IACzB,cAAc;AAAA,IACd,eAAe;AAAA,IACf,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAO,eAAE,QAAQ,MAAM;AAAA,IACvB,YAAY;AAAA,IACZ,aAAa;AAAA,IACb,YAAY;AAAA,IACZ,aAAa;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AACH,CAAC;AAGM,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAO,eAAE,QAAQ,QAAQ;AAAA,IACzB,QAAQ;AAAA,EACV,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,OAAO,eAAE,QAAQ,MAAM;AAAA,IACvB,OAAO;AAAA,IACP,QAAQ;AAAA,EACV,CAAC;AACH,CAAC;AAGM,IAAM,oBAAoB,eAAE,OAAO;AAAA,EACxC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,MAAM,eAAE,OAAO;AACjB,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AACN,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,QAAQ,eAAE,MAAM,mBAAK;AAAA,EACrB,UAAU,eAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC9C,WAAW,eAAE,KAAK,CAAC,OAAO,MAAM,CAAC,EAAE,SAAS;AAC9C,CAAC;AAGM,IAAM,iBAAiB;AAGvB,IAAM,mBAAmB,qBAAqB,OAAO;AAAA,EAC1D;AACF,CAAC;AAGM,IAAM,YAAY,kBAAkB,OAAO;AAAA,EAChD,MAAM,eAAE,OAAO;AAAA,EACf,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,SAAS,eAAE,MAAM,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC;AACF,CAAC;AAGM,IAAM,sBAAsB,eAAe,OAAO;AAAA,EACvD,MAAM,eAAE,OAAO;AAAA,EACf,iBAAiB,eACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAM,eAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAU,qBAAO,SAAS;AAC5B,CAAC;AAGM,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAO,eAAE,MAAM,8BAAgB;AAAA,EAC/B,aAAa,qBAAO,SAAS;AAC/B,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,aAAa;AAAA,EACb,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AACN,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAU,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAW,eAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAa,uBAAS,SAAS;AAAA,EAC/B,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAGI,IAAM,wBAAwB,eAClC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAU,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAW,eAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAa,uBAAS,SAAS;AAAA,EAC/B,QAAQ;AACV,CAAC;AAGI,IAAM,sBAAsB,eAAE,OAAO;AAAA,EAC1C,GAAG;AAAA,EACH,GAAG;AAAA,EACH,KAAK,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC1B,SAAS,wBAAU,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiB,eAAE,OAAO;AAAA,EACrC,KAAK,eACF,OAAO,EACP,SAAS,EACT;AAAA,IACC;AAAA,EACF;AAAA,EACF,OAAO,eAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,QAAQ,+BAAiB,GAAG,mBAAmB,EAAE,SAAS;AAAA,EAC1D,SAAS,eACN,MAAM,8BAAgB,EACtB,GAAG,eAAE,MAAM,mBAAmB,CAAC,EAC/B,SAAS;AAAA,EACZ,YAAY,eAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAIM,IAAM,gBAAgB,eAAE,OAAO;AAAA,EACpC,OAAO,eAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,WAAW,uBAAS,SAAS;AAAA,EAC7B,OAAO,eAAE,MAAM,8BAAgB;AACjC,CAAC;AAGM,IAAM,2BAA2B,eAAe,OAAO;AAAA,EAC5D,MAAM,eAAE,OAAO;AAAA,EACf,iBAAiB,eACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAM,eAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAU,qBAAO,SAAS;AAAA,EAC1B,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AAGM,IAAM,2BAA2B,eACrC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAO,eAAE,MAAM,8BAAgB;AAAA,EAC/B,aAAa,qBAAO,SAAS;AAAA,EAC7B,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;","names":["distanceOrMultiplier","import_soup","import_zod","import_zod","import_zod","import_soup","import_zod","import_zod","import_zod","import_zod","import_zod","import_soup","import_zod","import_soup","import_soup","import_zod","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_zod","import_zod","import_soup","import_zod","import_zod","import_zod","import_zod","import_zod","import_soup","import_soup","import_zod","distanceOrMultiplier"]}
+{"version":3,"sources":["../lib/index.ts","../lib/typecheck.ts","../lib/common/direction.ts","../lib/common/portHints.ts","../lib/common/layout.ts","../lib/common/point3.ts","../lib/common/cadModel.ts","../lib/common/footprintProp.ts","../lib/common/schematicPinDefinitions.ts","../lib/common/schematicPinStyle.ts","../lib/components/board.ts","../lib/common/point.ts","../lib/components/chip.ts","../lib/components/jumper.ts","../lib/components/resistor.ts","../lib/components/capacitor.ts","../lib/components/group.ts","../lib/components/net.ts","../lib/components/constrainedlayout.ts","../lib/common/distance.ts","../lib/components/constraint.ts","../lib/components/smtpad.ts","../lib/components/solderpaste.ts","../lib/components/hole.ts","../lib/components/trace.ts","../lib/components/footprint.ts","../lib/components/battery.ts"],"sourcesContent":["/**\n * THINKING ABOUT ADDING SOMETHING TO THIS FILE?\n *\n * THINK AGAIN!\n *\n * This file is TOO BIG! Create files using the pattern in the surrounding\n * directories, then export from this file.\n */\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport {\n  type AnySoupElementInput,\n  capacitance,\n  distance,\n  inductance,\n  layer_ref,\n  length,\n  type PCBPlatedHoleInput,\n  type PCBSMTPadInput,\n  point,\n  resistance,\n  rotation,\n  route_hint_point,\n  supplier_name,\n  voltage,\n} from \"@tscircuit/soup\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\nimport { direction } from \"./common/direction\"\nimport { portHints } from \"./common/portHints\"\nimport {\n  commonComponentProps,\n  commonLayoutProps,\n  lrPins,\n  lrPolarPins,\n  pcbLayoutProps,\n} from \"./common/layout\"\nimport { explicitPinSideDefinition } from \"./common/schematicPinDefinitions\"\n\nexport * from \"./common/direction\"\nexport * from \"./common/portHints\"\nexport * from \"./common/layout\"\nexport * from \"./common/point3\"\nexport * from \"./common/portHints\"\nexport * from \"./common/footprintProp\"\nexport * from \"./common/schematicPinDefinitions\"\nexport * from \"./common/schematicPinStyle\"\nexport * from \"./common/cadModel\"\n\nexport * from \"./components/board\"\nexport * from \"./components/chip\"\nexport * from \"./components/jumper\"\n\nexport * from \"./components/resistor\"\nexport * from \"./components/capacitor\"\nexport * from \"./components/group\"\nexport * from \"./components/net\"\nexport * from \"./components/constrainedlayout\"\nexport * from \"./components/constraint\"\nexport * from \"./components/smtpad\"\nexport * from \"./components/solderpaste\"\nexport * from \"./components/hole\"\nexport * from \"./components/trace\"\nexport * from \"./components/footprint\"\nexport * from \"./components/battery\"\n\nexport const inductorProps = commonComponentProps.extend({\n  inductance,\n})\nexport const inductorPins = lrPins\nexport type InductorProps = z.input<typeof inductorProps>\n\nexport const diodeProps = commonComponentProps.extend({})\nexport const diodePins = lrPolarPins\nexport type DiodeProps = z.input<typeof diodeProps>\n\nexport const ledProps = commonComponentProps.extend({\n  color: z.string().optional(),\n})\nexport const ledPins = lrPolarPins\nexport type LedProps = z.input<typeof ledProps>\n\nexport const switchProps = commonComponentProps.extend({\n  ftype: z.literal(\"switch\"),\n  switchType: z.enum([\"spst\"]).default(\"spst\"),\n  isNormallyClosed: z.boolean().default(false),\n})\nexport type SwitchProps = z.input<typeof switchProps>\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n\nexport const viaProps = commonLayoutProps.extend({\n  fromLayer: layer_ref,\n  toLayer: layer_ref,\n  holeDiameter: distance,\n  outerDiameter: distance,\n})\nexport type ViaProps = z.input<typeof viaProps>\n\nexport const netAliasProps = commonLayoutProps.extend({\n  net: z.string().optional(),\n})\nexport type NetAliasProps = z.input<typeof netAliasProps>\n\nexport const platedHoleProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"circle\"),\n    holeDiameter: distance,\n    outerDiameter: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"oval\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n])\nexport type PlatedHoleProps = z.input<typeof platedHoleProps>\n\nexport const pcbKeepoutProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  }),\n  pcbLayoutProps.extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  }),\n])\nexport type PcbKeepoutProps = z.input<typeof pcbKeepoutProps>\n\nexport const schematicBoxProps = z.object({\n  schX: distance,\n  schY: distance,\n  width: distance,\n  height: distance,\n})\nexport type SchematicBoxProps = z.input<typeof schematicBoxProps>\n\nexport const schematicTextProps = z.object({\n  schX: distance,\n  schY: distance,\n  text: z.string(),\n})\nexport type SchematicTextProps = z.input<typeof schematicTextProps>\n\nexport const schematicLineProps = z.object({\n  x1: distance,\n  y1: distance,\n  x2: distance,\n  y2: distance,\n})\nexport type SchematicLineProps = z.input<typeof schematicLineProps>\n\nexport const schematicPathProps = z.object({\n  points: z.array(point),\n  isFilled: z.boolean().optional().default(false),\n  fillColor: z.enum([\"red\", \"blue\"]).optional(),\n})\nexport type SchematicPathProps = z.input<typeof schematicPathProps>\n\nexport const componentProps = commonComponentProps\nexport type ComponentProps = z.input<typeof componentProps>\n\nexport const powerSourceProps = commonComponentProps.extend({\n  voltage,\n})\nexport type PowerSourceProps = z.input<typeof powerSourceProps>\n\nexport const portProps = commonLayoutProps.extend({\n  name: z.string(),\n  pinNumber: z.number().optional(),\n  aliases: z.array(z.string()).optional(),\n  direction: direction,\n})\nexport type PortProps = z.input<typeof portProps>\n\nexport const silkscreenTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type SilkscreenTextProps = z.input<typeof silkscreenTextProps>\n\nexport const silkscreenPathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type SilkscreenPathProps = z.input<typeof silkscreenPathProps>\n\nexport const silkscreenLineProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    strokeWidth: distance,\n    x1: distance,\n    y1: distance,\n    x2: distance,\n    y2: distance,\n  })\nexport type SilkscreenLineProps = z.input<typeof silkscreenLineProps>\n\nexport const silkscreenRectProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    width: distance,\n    height: distance,\n  })\nexport type SilkscreenRectProps = z.input<typeof silkscreenRectProps>\n\nexport const silkscreenCircleProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    radius: distance,\n  })\nexport type SilkscreenCircleProps = z.input<typeof silkscreenCircleProps>\n\nexport const routeHintPointProps = z.object({\n  x: distance,\n  y: distance,\n  via: z.boolean().optional(),\n  toLayer: layer_ref.optional(),\n})\n\nexport const traceHintProps = z.object({\n  for: z\n    .string()\n    .optional()\n    .describe(\n      \"Selector for the port you're targeting, not required if you're inside a trace\",\n    ),\n  order: z.number().optional(),\n  offset: route_hint_point.or(routeHintPointProps).optional(),\n  offsets: z\n    .array(route_hint_point)\n    .or(z.array(routeHintPointProps))\n    .optional(),\n  traceWidth: z.number().optional(),\n})\n\nexport type TraceHintProps = z.input<typeof traceHintProps>\n\nexport const pcbTraceProps = z.object({\n  layer: z.string().optional(),\n  thickness: distance.optional(),\n  route: z.array(route_hint_point),\n})\nexport type PcbTraceProps = z.input<typeof pcbTraceProps>\n\nexport const fabricationNoteTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n  color: z.string().optional(),\n})\nexport type FabricationNoteTextProps = z.input<typeof fabricationNoteTextProps>\n\nexport const fabricationNotePathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n    color: z.string().optional(),\n  })\nexport type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>\n","import type { TypeEqual } from \"ts-expect\"\n\nexport const expectTypesMatch = <const T1, const T2>(\n  shouldBe: TypeEqual<T1, T2>,\n): void => {}\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nexport const direction = z.enum([\"up\", \"down\", \"left\", \"right\"])\nexport type Direction = \"up\" | \"down\" | \"left\" | \"right\"\n\nexport type DirectionAlongEdge =\n  | \"top-to-bottom\"\n  | \"left-to-right\"\n  | \"bottom-to-top\"\n  | \"right-to-left\"\n\nexport const directionAlongEdge = z.enum([\n  \"top-to-bottom\",\n  \"left-to-right\",\n  \"bottom-to-top\",\n  \"right-to-left\",\n])\n\nexpectTypesMatch<Direction, z.infer<typeof direction>>(true)\nexpectTypesMatch<DirectionAlongEdge, z.infer<typeof directionAlongEdge>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const portHints = z.array(z.string().or(z.number()))\nexport type PortHints = (string | number)[]\n\nexpectTypesMatch<PortHints, z.infer<typeof portHints>>(true)\n","import { z } from \"zod\"\nimport {\n  type AnySoupElementInput,\n  distance,\n  layer_ref,\n  type LayerRef,\n  type LayerRefInput,\n  rotation,\n  supplier_name,\n} from \"@tscircuit/soup\"\nimport { point3 } from \"./point3\"\nimport {\n  cadModelJscad,\n  cadModelObj,\n  cadModelProp,\n  cadModelStl,\n  type CadModelJscad,\n  type CadModelObj,\n  type CadModelProp,\n  type CadModelStl,\n} from \"./cadModel\"\nimport { footprintProp, type Footprint } from \"./footprintProp\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface PcbLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n  layer?: LayerRefInput\n}\n\nexport interface CommonLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n\n  schX?: string | number\n  schY?: string | number\n  schRotation?: string | number\n\n  layer?: LayerRefInput\n  footprint?: Footprint\n}\n\nexport const pcbLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n})\ntype InferredPcbLayoutProps = z.input<typeof pcbLayoutProps>\nexpectTypesMatch<PcbLayoutProps, InferredPcbLayoutProps>(true)\n\nexport const commonLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n  footprint: footprintProp.optional(),\n})\n\ntype InferredCommonLayoutProps = z.input<typeof commonLayoutProps>\nexpectTypesMatch<CommonLayoutProps, InferredCommonLayoutProps>(true)\n\nexport type SupplierName =\n  | \"jlcpcb\"\n  | \"macrofab\"\n  | \"pcbway\"\n  | \"digikey\"\n  | \"mouser\"\n  | \"lcsc\"\nexport interface SupplierProps {\n  supplierPartNumbers?: { [k in SupplierName]?: string[] }\n}\nexport const supplierProps = z.object({\n  supplierPartNumbers: z.record(supplier_name, z.array(z.string())).optional(),\n})\n\nexpectTypesMatch<SupplierProps, z.input<typeof supplierProps>>(true)\n\nexport interface CommonComponentProps extends CommonLayoutProps {\n  key?: any\n  name: string\n  supplierPartNumbers?: SupplierProps[\"supplierPartNumbers\"]\n  cadModel?: CadModelProp\n  children?: any\n  symbolName?: string\n}\n\nexport const commonComponentProps = commonLayoutProps\n  .merge(supplierProps)\n  .extend({\n    key: z.any().optional(),\n    name: z.string(),\n    cadModel: cadModelProp.optional(),\n    children: z.any().optional(),\n    symbolName: z.string().optional(),\n  })\n\ntype InferredCommonComponentProps = z.input<typeof commonComponentProps>\nexpectTypesMatch<CommonComponentProps, InferredCommonComponentProps>(true)\n\nexport const lrPins = [\"pin1\", \"left\", \"pin2\", \"right\"] as const\nexport const lrPolarPins = [\n  \"pin1\",\n  \"left\",\n  \"anode\",\n  \"pos\",\n  \"pin2\",\n  \"right\",\n  \"cathode\",\n  \"neg\",\n] as const\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n","import { distance } from \"@tscircuit/soup\"\nimport { z } from \"zod\"\n\nexport const point3 = z.object({\n  x: distance,\n  y: distance,\n  z: distance,\n})\n","import { z } from \"zod\"\nimport { point3 } from \"./point3\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const rotationPoint3 = z.object({\n  x: z.union([z.number(), z.string()]),\n  y: z.union([z.number(), z.string()]),\n  z: z.union([z.number(), z.string()]),\n})\n\nexport interface CadModelBase {\n  rotationOffset?:\n    | number\n    | { x: number | string; y: number | string; z: number | string }\n  positionOffset?: {\n    x: number | string\n    y: number | string\n    z: number | string\n  }\n  size?: { x: number | string; y: number | string; z: number | string }\n}\n\nexport const cadModelBase = z.object({\n  rotationOffset: z.number().or(rotationPoint3).optional(),\n  positionOffset: point3.optional(),\n  size: point3.optional(),\n})\n\nexpectTypesMatch<CadModelBase, z.input<typeof cadModelBase>>(true)\n\nexport interface CadModelStl extends CadModelBase {\n  stlUrl: string\n}\nexport const cadModelStl = cadModelBase.extend({\n  stlUrl: z.string(),\n})\n\nexport interface CadModelObj extends CadModelBase {\n  objUrl: string\n  mtlUrl?: string\n}\nexport const cadModelObj = cadModelBase.extend({\n  objUrl: z.string(),\n  mtlUrl: z.string().optional(),\n})\n\nexport interface CadModelJscad extends CadModelBase {\n  jscad: Record<string, any>\n}\nexport const cadModelJscad = cadModelBase.extend({\n  jscad: z.record(z.any()),\n})\n\nexport type CadModelProp = string | CadModelStl | CadModelObj | CadModelJscad\n\nexport const cadModelProp = z.union([\n  z.string(),\n  cadModelStl,\n  cadModelObj,\n  cadModelJscad,\n])\n\ntype InferredCadModelProp = z.input<typeof cadModelProp>\nexpectTypesMatch<CadModelProp, InferredCadModelProp>(true)\n","import type { LayerRef } from \"@tscircuit/soup\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\n\n/**\n * This is an abbreviated definition of the soup elements that you can find here:\n * https://docs.tscircuit.com/api-reference/advanced/soup#pcb-smtpad\n */\nexport type FootprintSoupElements = {\n  type: \"pcb_smtpad\" | \"pcb_plated_hole\"\n  x: string | number\n  y: string | number\n  layer?: LayerRef\n  holeDiameter?: string | number\n  outerDiameter?: string | number\n  shape?: \"circle\" | \"rect\"\n  width?: string | number\n  height?: string | number\n  portHints?: string[]\n}\n\nexport type Footprint = string | ReactElement | FootprintSoupElements[]\nexport const footprintProp = z.custom<Footprint>((v) => true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\n/**\n * @deprecated Use SchematicPortArrangementWithPinCounts instead.\n */\nexport interface SchematicPortArrangementWithSizes {\n  leftSize?: number\n  topSize?: number\n  rightSize?: number\n  bottomSize?: number\n}\n\n/**\n * Specifies the number of pins on each side of the schematic box component.\n */\nexport interface SchematicPortArrangementWithPinCounts {\n  leftPinCount?: number\n  topPinCount?: number\n  rightPinCount?: number\n  bottomPinCount?: number\n}\n\nexport interface PinSideDefinition {\n  pins: number[]\n  direction:\n    | \"top-to-bottom\"\n    | \"left-to-right\"\n    | \"bottom-to-top\"\n    | \"right-to-left\"\n}\n\nexport interface SchematicPortArrangementWithSides {\n  leftSide?: PinSideDefinition\n  topSide?: PinSideDefinition\n  rightSide?: PinSideDefinition\n  bottomSide?: PinSideDefinition\n}\n\nexport interface SchematicPortArrangement\n  extends SchematicPortArrangementWithSizes,\n    SchematicPortArrangementWithSides,\n    SchematicPortArrangementWithPinCounts {}\n\nexport const explicitPinSideDefinition = z.object({\n  pins: z.array(z.number()),\n  direction: z.union([\n    z.literal(\"top-to-bottom\"),\n    z.literal(\"left-to-right\"),\n    z.literal(\"bottom-to-top\"),\n    z.literal(\"right-to-left\"),\n  ]),\n})\n\nexport const schematicPortArrangement = z.object({\n  leftSize: z.number().optional().describe(\"@deprecated, use leftPinCount\"),\n  topSize: z.number().optional().describe(\"@deprecated, use topPinCount\"),\n  rightSize: z.number().optional().describe(\"@deprecated, use rightPinCount\"),\n  bottomSize: z.number().optional().describe(\"@deprecated, use bottomPinCount\"),\n  leftPinCount: z.number().optional(),\n  rightPinCount: z.number().optional(),\n  topPinCount: z.number().optional(),\n  bottomPinCount: z.number().optional(),\n  leftSide: explicitPinSideDefinition.optional(),\n  rightSide: explicitPinSideDefinition.optional(),\n  topSide: explicitPinSideDefinition.optional(),\n  bottomSide: explicitPinSideDefinition.optional(),\n})\n\nexpectTypesMatch<\n  SchematicPortArrangement,\n  z.input<typeof schematicPortArrangement>\n>(true)\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type SchematicPinStyle = Record<\n  string,\n  {\n    leftMargin?: number | string\n    rightMargin?: number | string\n    topMargin?: number | string\n    bottomMargin?: number | string\n  }\n>\n\nexport const schematicPinStyle = z.record(\n  z.object({\n    leftMargin: distance.optional(),\n    rightMargin: distance.optional(),\n    topMargin: distance.optional(),\n    bottomMargin: distance.optional(),\n  }),\n)\n\nexpectTypesMatch<SchematicPinStyle, z.input<typeof schematicPinStyle>>(true)\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { point, type Point } from \"lib/common/point\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport type { SubcircuitGroupProps } from \"./group\"\nimport type { Distance } from \"lib/common/distance\"\n\nexport interface BoardProps {\n  width?: number | string\n  height?: number | string\n  outline?: Point[]\n  pcbX?: number | string\n  pcbY?: number | string\n  layout?: any\n  routingDisabled?: boolean\n  children?: any\n  defaultTraceWidth?: Distance\n  /**\n   * If true, we'll automatically layout the schematic for this group. Must be\n   * a subcircuit (currently). This is eventually going to be replaced with more\n   * sophisticated layout options/modes and will be enabled by default.\n   */\n  schAutoLayoutEnabled?: boolean\n}\n\nexport const boardProps = z.object({\n  width: distance.optional(),\n  height: distance.optional(),\n  outline: z.array(point).optional(),\n  pcbX: distance.optional().default(0),\n  pcbY: distance.optional().default(0),\n  layout: z.any().optional(),\n  routingDisabled: z.boolean().optional(),\n  children: z.any(),\n  defaultTraceWidth: distance.optional(),\n  schAutoLayoutEnabled: z.boolean().optional(),\n})\n\nexpectTypesMatch<BoardProps, z.input<typeof boardProps>>(true)\n","import { distance } from \"@tscircuit/soup\"\nimport { z } from \"zod\"\n\nexport const point = z.object({\n  x: distance,\n  y: distance,\n})\n\nexport type Point = { x: number | string; y: number | string }\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  schematicPortArrangement,\n  type SchematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  schematicPinStyle,\n  type SchematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport type { Distance } from \"lib/common/distance\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface ChipProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | string[]>\n  schPortArrangement?: SchematicPortArrangement\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: Distance\n  schWidth?: Distance\n  schHeight?: Distance\n}\n\nexport const chipProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(z.number().or(z.string()), z.string().or(z.array(z.string())))\n    .optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n})\n\n/**\n * @deprecated Use ChipProps instead.\n */\nexport const bugProps = chipProps\nexport type InferredChipProps = z.input<typeof chipProps>\n\nexpectTypesMatch<InferredChipProps, ChipProps>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  schematicPinStyle,\n  type SchematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { distance } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport {\n  schematicPortArrangement,\n  type SchematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\n\nexport interface JumperProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string>\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: number | string\n  schWidth?: number | string\n  schHeight?: number | string\n  schDirection?: \"left\" | \"right\"\n  schPortArrangement?: SchematicPortArrangement\n}\n\nexport const jumperProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z.record(z.number().or(z.string()), z.string()).optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  schDirection: z.enum([\"left\", \"right\"]).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n})\n\ntype InferredJumperProps = z.input<typeof jumperProps>\nexpectTypesMatch<JumperProps, InferredJumperProps>(true)\n","import { z } from \"zod\"\nimport { resistance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  lrPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface ResistorProps extends CommonComponentProps {\n  resistance: number | string\n  pullupFor?: string\n  pullupTo?: string\n  pulldownFor?: string\n  pulldownTo?: string\n}\n\nexport const resistorProps = commonComponentProps.extend({\n  resistance,\n\n  pullupFor: z.string().optional(),\n  pullupTo: z.string().optional(),\n\n  pulldownFor: z.string().optional(),\n  pulldownTo: z.string().optional(),\n})\nexport const resistorPins = lrPins\n\ntype InferredResistorProps = z.input<typeof resistorProps>\nexpectTypesMatch<ResistorProps, InferredResistorProps>(true)\n","import { z } from \"zod\"\nimport { capacitance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface CapacitorProps extends CommonComponentProps {\n  capacitance: number | string\n\n  decouplingFor?: string\n  decouplingTo?: string\n\n  bypassFor?: string\n  bypassTo?: string\n}\n\nexport const capacitorProps = commonComponentProps.extend({\n  capacitance,\n\n  decouplingFor: z.string().optional(),\n  decouplingTo: z.string().optional(),\n\n  bypassFor: z.string().optional(),\n  bypassTo: z.string().optional(),\n})\nexport const capacitorPins = lrPolarPins\n\nexpectTypesMatch<CapacitorProps, z.input<typeof capacitorProps>>(true)\n","import { z } from \"zod\"\nimport { commonLayoutProps, type CommonLayoutProps } from \"lib/common/layout\"\nimport { length } from \"@tscircuit/soup\"\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\n\nexport interface BaseGroupProps extends CommonLayoutProps {\n  name?: string\n  children?: any\n}\n\nexport interface SubcircuitGroupProps extends BaseGroupProps {\n  subcircuit: true\n  layout?: LayoutBuilder\n  routingDisabled?: boolean\n  defaultTraceWidth?: Distance\n\n  /**\n   * If true, we'll automatically layout the schematic for this group. Must be\n   * a subcircuit (currently). This is eventually going to be replaced with more\n   * sophisticated layout options/modes and will be enabled by default.\n   */\n  schAutoLayoutEnabled?: boolean\n}\n\nexport type GroupProps = SubcircuitGroupProps | BaseGroupProps\n\nexport const baseGroupProps = commonLayoutProps.extend({\n  name: z.string().optional(),\n  children: z.any().optional(),\n})\n\nexport const subcircuitGroupProps = baseGroupProps.extend({\n  subcircuit: z.literal(true),\n  layout: z.custom<LayoutBuilder>((v) => true).optional(),\n  schAutoLayoutEnabled: z.boolean().optional(),\n  routingDisabled: z.boolean().optional(),\n  defaultTraceWidth: length.optional(),\n})\n\nexport const groupProps = z.union([baseGroupProps, subcircuitGroupProps])\n\ntype InferredBaseGroupProps = z.input<typeof baseGroupProps>\ntype InferredSubcircuitGroupProps = z.input<typeof subcircuitGroupProps>\n\nexpectTypesMatch<BaseGroupProps, InferredBaseGroupProps>(true)\nexpectTypesMatch<SubcircuitGroupProps, InferredSubcircuitGroupProps>(true)\n\ntype InferredGroupProps = z.input<typeof groupProps>\nexpectTypesMatch<GroupProps, InferredGroupProps>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface NetProps {\n  name: string\n}\n\nexport const netProps = z.object({\n  name: z.string(),\n})\n\ntype InferredNetProps = z.input<typeof netProps>\nexpectTypesMatch<NetProps, InferredNetProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ConstrainedLayoutProps {\n  name?: string\n  pcbOnly?: boolean\n  schOnly?: boolean\n}\n\nexport const constrainedLayoutProps = z.object({\n  name: z.string().optional(),\n  pcbOnly: z.boolean().optional(),\n  schOnly: z.boolean().optional(),\n})\n\nexport type InferredConstrainedLayoutProps = z.input<\n  typeof constrainedLayoutProps\n>\n\nexpectTypesMatch<InferredConstrainedLayoutProps, ConstrainedLayoutProps>(true)\n","import { z } from \"zod\"\n\nexport type Distance = number | string\n\nexport { distance, length } from \"@tscircuit/soup\"\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\nimport { distance } from \"lib/common/distance\"\nimport { z } from \"zod\"\n\nexport type PcbXDistConstraint = {\n  pcb?: true\n  xDist: Distance\n\n  /**\n   * Selector for left component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  left: string\n\n  /**\n   * Selector for right component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  right: string\n\n  /**\n   * If true, the provided distance is the distance between the closest edges of\n   * the left and right components\n   */\n  edgeToEdge?: true\n\n  /**\n   * If true, the provided distance is the distance between the centers of the\n   * left and right components\n   */\n  centerToCenter?: true\n}\n\nexport type PcbYDistConstraint = {\n  pcb?: true\n  yDist: Distance\n\n  /**\n   * Selector for top component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 topedge\", \".R1 center\"\n   */\n  top: string\n\n  /**\n   * Selector for bottom component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 bottomedge\", \".R1 center\"\n   */\n  bottom: string\n\n  edgeToEdge?: true\n  centerToCenter?: true\n}\n\nexport type PcbSameYConstraint = {\n  pcb?: true\n  sameY?: true\n\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type PcbSameXConstraint = {\n  pcb?: true\n  sameX?: true\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type ConstraintProps =\n  | PcbXDistConstraint\n  | PcbYDistConstraint\n  | PcbSameYConstraint\n  | PcbSameXConstraint\n\n// -----------------------------------------------------------------------------\n// Zod\n// -----------------------------------------------------------------------------\n\nexport const pcbXDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  xDist: distance,\n  left: z.string(),\n  right: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbXDistConstraint, z.input<typeof pcbXDistConstraintProps>>(\n  true,\n)\n\nexport const pcbYDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  yDist: distance,\n  top: z.string(),\n  bottom: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbYDistConstraint, z.input<typeof pcbYDistConstraintProps>>(\n  true,\n)\n\nexport const pcbSameYConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameY: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameYConstraint, z.input<typeof pcbSameYConstraintProps>>(\n  true,\n)\n\nexport const pcbSameXConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameX: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameXConstraint, z.input<typeof pcbSameXConstraintProps>>(\n  true,\n)\n\nexport const constraintProps = z.union([\n  pcbXDistConstraintProps,\n  pcbYDistConstraintProps,\n  pcbSameYConstraintProps,\n  pcbSameXConstraintProps,\n])\n\nexpectTypesMatch<ConstraintProps, z.input<typeof constraintProps>>(true)\n","import {\n  pcbLayoutProps,\n  type CommonLayoutProps,\n  type PcbLayoutProps,\n} from \"lib/common/layout\"\nimport { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { portHints, type PortHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n  portHints?: PortHints\n}\n\nexport interface CircleSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport type SmtPadProps = RectSmtPadProps | CircleSmtPadProps\n\n// ----------------------------------------------------------------------------\n// Zod\n// ----------------------------------------------------------------------------\n\nexport const rectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredRectSmtPadProps = z.input<typeof rectSmtPadProps>\nexpectTypesMatch<InferredRectSmtPadProps, RectSmtPadProps>(true)\n\nexport const circleSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredCircleSmtPadProps = z.input<typeof circleSmtPadProps>\nexpectTypesMatch<InferredCircleSmtPadProps, CircleSmtPadProps>(true)\n\nexport const smtPadProps = z.union([circleSmtPadProps, rectSmtPadProps])\n\nexport type InferredSmtPadProps = z.input<typeof smtPadProps>\nexpectTypesMatch<InferredSmtPadProps, SmtPadProps>(true)\n","import { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { boolean, string, z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n}\n\nexport interface CircleSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n}\n\nexport type SolderPasteProps = RectSolderPasteProps | CircleSolderPasteProps\n\n// zod\n\nexport const rectSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  })\ntype InferredRectSolderPasteProps = z.input<typeof rectSolderPasteProps>\nexpectTypesMatch<InferredRectSolderPasteProps, RectSolderPasteProps>(true)\n\nexport const circleSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  })\ntype InferredCircleSolderPasteProps = z.input<typeof circleSolderPasteProps>\nexpectTypesMatch<InferredCircleSolderPasteProps, CircleSolderPasteProps>(true)\n\nexport const solderPasteProps = z.union([\n  circleSolderPasteProps,\n  rectSolderPasteProps,\n])\n\nexport type InferredSolderPasteProps = z.input<typeof solderPasteProps>\nexpectTypesMatch<InferredSolderPasteProps, SolderPasteProps>(true)\n","import { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface HoleProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  name?: string\n  diameter?: Distance\n  radius?: Distance\n}\n\nexport const holeProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    name: z.string().optional(),\n    diameter: distance.optional(),\n    radius: distance.optional(),\n  })\n  .transform((d) => ({\n    ...d,\n    diameter: d.diameter ?? 2 * d.radius!,\n    radius: d.radius ?? d.diameter! / 2,\n  }))\n\nexport type InferredHoleProps = z.input<typeof holeProps>\n\nexpectTypesMatch<HoleProps, InferredHoleProps>(true)\n","import { z } from \"zod\"\nimport { distance, route_hint_point } from \"@tscircuit/soup\"\nimport { point } from \"../common/point\"\n\nexport const portRef = z.union([\n  z.string(),\n  z.custom<{ getPortSelector: () => string }>((v) =>\n    Boolean(v.getPortSelector),\n  ),\n])\n\nconst baseTraceProps = z.object({\n  key: z.string().optional(),\n  thickness: distance.optional(),\n  schematicRouteHints: z.array(point).optional(),\n  pcbRouteHints: z.array(route_hint_point).optional(),\n})\n\nexport const traceProps = z.union([\n  baseTraceProps.extend({\n    path: z.array(portRef),\n  }),\n  baseTraceProps.extend({\n    from: portRef,\n    to: portRef,\n  }),\n])\n\nexport type TraceProps = z.input<typeof traceProps>\n","import { layer_ref, type LayerRef } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface FootprintProps {\n  /**\n   * The layer that the footprint is designed for. If you set this to \"top\"\n   * then it means the children were intended to represent the top layer. If\n   * the <chip /> with this footprint is moved to the bottom layer, then the\n   * components will be mirrored.\n   *\n   * Generally, you shouldn't set this except where it can help prevent\n   * confusion because you have a complex multi-layer footprint. Default is\n   * \"top\" and this is most intuitive.\n   */\n  originalLayer?: LayerRef\n}\n\nexport const footprintProps = z.object({\n  originalLayer: layer_ref.default(\"top\").optional(),\n})\n\nexport type FootprintPropsInput = z.input<typeof footprintProps>\ntype InferredFootprintProps = z.infer<typeof footprintProps>\nexpectTypesMatch<InferredFootprintProps, FootprintProps>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\n/** @deprecated use battery_capacity from circuit-json when circuit-json is updated */\nconst capacity = z\n  .number()\n  .or(z.string().endsWith(\"mAh\"))\n  .transform((v) => {\n    if (typeof v === \"string\") {\n      const valString = v.replace(\"mAh\", \"\")\n      const num = Number.parseFloat(valString)\n      if (Number.isNaN(num)) {\n        throw new Error(\"Invalid capacity\")\n      }\n      return num\n    }\n    return v\n  })\n  .describe(\"Battery capacity in mAh\")\n\nexport interface BatteryProps extends CommonComponentProps {\n  capacity?: number | string\n}\n\nexport const batteryProps = commonComponentProps.extend({\n  capacity: capacity.optional(),\n})\nexport const batteryPins = lrPolarPins\n\nexpectTypesMatch<BatteryProps, z.input<typeof batteryProps>>(true)\n"],"mappings":";;;;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,8BAAAA;AAAA,EAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AASA,IAAAC,gBAeO;AAEP,IAAAC,eAAkB;;;ACxBX,IAAM,mBAAmB,CAC9B,aACS;AAAC;;;ACHZ,iBAAkB;AACX,IAAM,YAAY,aAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC;AASxD,IAAM,qBAAqB,aAAE,KAAK;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAuD,IAAI;AAC3D,iBAAyE,IAAI;;;ACnB7E,IAAAC,cAAkB;AAGX,IAAM,YAAY,cAAE,MAAM,cAAE,OAAO,EAAE,GAAG,cAAE,OAAO,CAAC,CAAC;AAG1D,iBAAuD,IAAI;;;ACN3D,IAAAC,cAAkB;AAClB,IAAAC,eAQO;;;ACTP,kBAAyB;AACzB,IAAAC,cAAkB;AAEX,IAAM,SAAS,cAAE,OAAO;AAAA,EAC7B,GAAG;AAAA,EACH,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ACPD,IAAAC,cAAkB;AAIX,IAAM,iBAAiB,cAAE,OAAO;AAAA,EACrC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AACrC,CAAC;AAcM,IAAM,eAAe,cAAE,OAAO;AAAA,EACnC,gBAAgB,cAAE,OAAO,EAAE,GAAG,cAAc,EAAE,SAAS;AAAA,EACvD,gBAAgB,OAAO,SAAS;AAAA,EAChC,MAAM,OAAO,SAAS;AACxB,CAAC;AAED,iBAA6D,IAAI;AAK1D,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQ,cAAE,OAAO;AACnB,CAAC;AAMM,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQ,cAAE,OAAO;AAAA,EACjB,QAAQ,cAAE,OAAO,EAAE,SAAS;AAC9B,CAAC;AAKM,IAAM,gBAAgB,aAAa,OAAO;AAAA,EAC/C,OAAO,cAAE,OAAO,cAAE,IAAI,CAAC;AACzB,CAAC;AAIM,IAAM,eAAe,cAAE,MAAM;AAAA,EAClC,cAAE,OAAO;AAAA,EACT;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAqD,IAAI;;;AC7DzD,IAAAC,cAAkB;AAoBX,IAAM,gBAAgB,cAAE,OAAkB,CAAC,MAAM,IAAI;;;AHsBrD,IAAM,iBAAiB,cAAE,OAAO;AAAA,EACrC,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,OAAO,uBAAU,SAAS;AAC5B,CAAC;AAED,iBAAyD,IAAI;AAEtD,IAAM,oBAAoB,cAAE,OAAO;AAAA,EACxC,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,OAAO,uBAAU,SAAS;AAAA,EAC1B,WAAW,cAAc,SAAS;AACpC,CAAC;AAGD,iBAA+D,IAAI;AAY5D,IAAM,gBAAgB,cAAE,OAAO;AAAA,EACpC,qBAAqB,cAAE,OAAO,4BAAe,cAAE,MAAM,cAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAC7E,CAAC;AAED,iBAA+D,IAAI;AAW5D,IAAM,uBAAuB,kBACjC,MAAM,aAAa,EACnB,OAAO;AAAA,EACN,KAAK,cAAE,IAAI,EAAE,SAAS;AAAA,EACtB,MAAM,cAAE,OAAO;AAAA,EACf,UAAU,aAAa,SAAS;AAAA,EAChC,UAAU,cAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,YAAY,cAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAGH,iBAAqE,IAAI;AAElE,IAAM,SAAS,CAAC,QAAQ,QAAQ,QAAQ,OAAO;AAC/C,IAAM,cAAc;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAEO,IAAM,uBAAuB,sBAAS,GAAG,cAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;;;AIpH1E,IAAAC,cAAkB;AA2CX,IAAM,4BAA4B,cAAE,OAAO;AAAA,EAChD,MAAM,cAAE,MAAM,cAAE,OAAO,CAAC;AAAA,EACxB,WAAW,cAAE,MAAM;AAAA,IACjB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,EAC3B,CAAC;AACH,CAAC;AAEM,IAAM,2BAA2B,cAAE,OAAO;AAAA,EAC/C,UAAU,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,+BAA+B;AAAA,EACxE,SAAS,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,8BAA8B;AAAA,EACtE,WAAW,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,gCAAgC;AAAA,EAC1E,YAAY,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,iCAAiC;AAAA,EAC5E,cAAc,cAAE,OAAO,EAAE,SAAS;AAAA,EAClC,eAAe,cAAE,OAAO,EAAE,SAAS;AAAA,EACnC,aAAa,cAAE,OAAO,EAAE,SAAS;AAAA,EACjC,gBAAgB,cAAE,OAAO,EAAE,SAAS;AAAA,EACpC,UAAU,0BAA0B,SAAS;AAAA,EAC7C,WAAW,0BAA0B,SAAS;AAAA,EAC9C,SAAS,0BAA0B,SAAS;AAAA,EAC5C,YAAY,0BAA0B,SAAS;AACjD,CAAC;AAED,iBAGE,IAAI;;;ACxEN,IAAAC,cAAkB;AAClB,IAAAC,eAAyB;AAalB,IAAM,oBAAoB,cAAE;AAAA,EACjC,cAAE,OAAO;AAAA,IACP,YAAY,sBAAS,SAAS;AAAA,IAC9B,aAAa,sBAAS,SAAS;AAAA,IAC/B,WAAW,sBAAS,SAAS;AAAA,IAC7B,cAAc,sBAAS,SAAS;AAAA,EAClC,CAAC;AACH;AAEA,iBAAuE,IAAI;;;ACvB3E,IAAAC,eAAkB;AAClB,IAAAC,eAAyB;;;ACDzB,IAAAC,eAAyB;AACzB,IAAAC,cAAkB;AAEX,IAAM,QAAQ,cAAE,OAAO;AAAA,EAC5B,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ADmBM,IAAM,aAAa,eAAE,OAAO;AAAA,EACjC,OAAO,sBAAS,SAAS;AAAA,EACzB,QAAQ,sBAAS,SAAS;AAAA,EAC1B,SAAS,eAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EACjC,MAAM,sBAAS,SAAS,EAAE,QAAQ,CAAC;AAAA,EACnC,MAAM,sBAAS,SAAS,EAAE,QAAQ,CAAC;AAAA,EACnC,QAAQ,eAAE,IAAI,EAAE,SAAS;AAAA,EACzB,iBAAiB,eAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,UAAU,eAAE,IAAI;AAAA,EAChB,mBAAmB,sBAAS,SAAS;AAAA,EACrC,sBAAsB,eAAE,QAAQ,EAAE,SAAS;AAC7C,CAAC;AAED,iBAAyD,IAAI;;;AEtC7D,IAAAC,eAAkB;AAClB,IAAAC,eAAyB;AA0BlB,IAAM,YAAY,qBAAqB,OAAO;AAAA,EACnD,wBAAwB,eAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,eACR,OAAO,eAAE,OAAO,EAAE,GAAG,eAAE,OAAO,CAAC,GAAG,eAAE,OAAO,EAAE,GAAG,eAAE,MAAM,eAAE,OAAO,CAAC,CAAC,CAAC,EACpE,SAAS;AAAA,EACZ,oBAAoB,yBAAyB,SAAS;AAAA,EACtD,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAe,sBAAS,SAAS;AAAA,EACjC,UAAU,sBAAS,SAAS;AAAA,EAC5B,WAAW,sBAAS,SAAS;AAC/B,CAAC;AAKM,IAAM,WAAW;AAGxB,iBAA+C,IAAI;;;AC7CnD,IAAAC,eAAkB;AASlB,IAAAC,eAAyB;AAkBlB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,wBAAwB,eAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,eAAE,OAAO,eAAE,OAAO,EAAE,GAAG,eAAE,OAAO,CAAC,GAAG,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACpE,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAe,sBAAS,SAAS;AAAA,EACjC,UAAU,sBAAS,SAAS;AAAA,EAC5B,WAAW,sBAAS,SAAS;AAAA,EAC7B,cAAc,eAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACjD,oBAAoB,yBAAyB,SAAS;AACxD,CAAC;AAGD,iBAAmD,IAAI;;;ACvCvD,IAAAC,eAAkB;AAClB,IAAAC,eAA2B;AAgBpB,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AAAA,EAEA,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAU,eAAE,OAAO,EAAE,SAAS;AAAA,EAE9B,aAAa,eAAE,OAAO,EAAE,SAAS;AAAA,EACjC,YAAY,eAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AACM,IAAM,eAAe;AAG5B,iBAAuD,IAAI;;;AC7B3D,IAAAC,eAAkB;AAClB,IAAAC,eAA4B;AAmBrB,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD;AAAA,EAEA,eAAe,eAAE,OAAO,EAAE,SAAS;AAAA,EACnC,cAAc,eAAE,OAAO,EAAE,SAAS;AAAA,EAElC,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAU,eAAE,OAAO,EAAE,SAAS;AAChC,CAAC;AACM,IAAM,gBAAgB;AAE7B,iBAAiE,IAAI;;;AC/BrE,IAAAC,eAAkB;AAElB,IAAAC,gBAAuB;AA0BhB,IAAM,iBAAiB,kBAAkB,OAAO;AAAA,EACrD,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAU,eAAE,IAAI,EAAE,SAAS;AAC7B,CAAC;AAEM,IAAM,uBAAuB,eAAe,OAAO;AAAA,EACxD,YAAY,eAAE,QAAQ,IAAI;AAAA,EAC1B,QAAQ,eAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACtD,sBAAsB,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC3C,iBAAiB,eAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,mBAAmB,qBAAO,SAAS;AACrC,CAAC;AAEM,IAAM,aAAa,eAAE,MAAM,CAAC,gBAAgB,oBAAoB,CAAC;AAKxE,iBAAyD,IAAI;AAC7D,iBAAqE,IAAI;AAGzE,iBAAiD,IAAI;;;AClDrD,IAAAC,eAAkB;AAOX,IAAM,WAAW,eAAE,OAAO;AAAA,EAC/B,MAAM,eAAE,OAAO;AACjB,CAAC;AAGD,iBAA6C,IAAI;;;ACXjD,IAAAC,eAAkB;AAQX,IAAM,yBAAyB,eAAE,OAAO;AAAA,EAC7C,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,SAAS,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC9B,SAAS,eAAE,QAAQ,EAAE,SAAS;AAChC,CAAC;AAMD,iBAAyE,IAAI;;;ACnB7E,IAAAC,eAAkB;AAIlB,IAAAC,gBAAiC;;;ACDjC,IAAAC,eAAkB;AAkFX,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO;AAAA,EACP,MAAM,eAAE,OAAO;AAAA,EACf,OAAO,eAAE,OAAO;AAAA,EAEhB,YAAY,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgB,eAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO;AAAA,EACP,KAAK,eAAE,OAAO;AAAA,EACd,QAAQ,eAAE,OAAO;AAAA,EAEjB,YAAY,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgB,eAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAK,eAAE,MAAM,eAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAK,eAAE,MAAM,eAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAmE,IAAI;;;ACnIvE,IAAAC,eAAkB;AAwBX,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,MAAM;AAAA,EACvB,OAAO;AAAA,EACP,QAAQ;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,oBAAoB,eAC9B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQ;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA+D,IAAI;AAE5D,IAAM,cAAc,eAAE,MAAM,CAAC,mBAAmB,eAAe,CAAC;AAGvE,iBAAmD,IAAI;;;ACnDvD,IAAAC,eAAmC;AAoB5B,IAAM,uBAAuB,eACjC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,MAAM;AAAA,EACvB,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAEH,iBAAqE,IAAI;AAElE,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQ;AACV,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,mBAAmB,eAAE,MAAM;AAAA,EACtC;AAAA,EACA;AACF,CAAC;AAGD,iBAA6D,IAAI;;;AC/CjE,IAAAC,eAAkB;AAWX,IAAM,YAAY,eACtB,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAU,uBAAS,SAAS;AAAA,EAC5B,QAAQ,uBAAS,SAAS;AAC5B,CAAC,EACA,UAAU,CAAC,OAAO;AAAA,EACjB,GAAG;AAAA,EACH,UAAU,EAAE,YAAY,IAAI,EAAE;AAAA,EAC9B,QAAQ,EAAE,UAAU,EAAE,WAAY;AACpC,EAAE;AAIJ,iBAA+C,IAAI;;;AC1BnD,IAAAC,eAAkB;AAClB,IAAAC,gBAA2C;AAGpC,IAAM,UAAU,eAAE,MAAM;AAAA,EAC7B,eAAE,OAAO;AAAA,EACT,eAAE;AAAA,IAA0C,CAAC,MAC3C,QAAQ,EAAE,eAAe;AAAA,EAC3B;AACF,CAAC;AAED,IAAM,iBAAiB,eAAE,OAAO;AAAA,EAC9B,KAAK,eAAE,OAAO,EAAE,SAAS;AAAA,EACzB,WAAW,uBAAS,SAAS;AAAA,EAC7B,qBAAqB,eAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EAC7C,eAAe,eAAE,MAAM,8BAAgB,EAAE,SAAS;AACpD,CAAC;AAEM,IAAM,aAAa,eAAE,MAAM;AAAA,EAChC,eAAe,OAAO;AAAA,IACpB,MAAM,eAAE,MAAM,OAAO;AAAA,EACvB,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,MAAM;AAAA,IACN,IAAI;AAAA,EACN,CAAC;AACH,CAAC;;;AC1BD,IAAAC,gBAAyC;AAEzC,IAAAC,eAAkB;AAgBX,IAAM,iBAAiB,eAAE,OAAO;AAAA,EACrC,eAAe,wBAAU,QAAQ,KAAK,EAAE,SAAS;AACnD,CAAC;AAID,iBAAyD,IAAI;;;ACxB7D,IAAAC,eAAkB;AAUlB,IAAM,WAAW,eACd,OAAO,EACP,GAAG,eAAE,OAAO,EAAE,SAAS,KAAK,CAAC,EAC7B,UAAU,CAAC,MAAM;AAChB,MAAI,OAAO,MAAM,UAAU;AACzB,UAAM,YAAY,EAAE,QAAQ,OAAO,EAAE;AACrC,UAAM,MAAM,OAAO,WAAW,SAAS;AACvC,QAAI,OAAO,MAAM,GAAG,GAAG;AACrB,YAAM,IAAI,MAAM,kBAAkB;AAAA,IACpC;AACA,WAAO;AAAA,EACT;AACA,SAAO;AACT,CAAC,EACA,SAAS,yBAAyB;AAM9B,IAAM,eAAe,qBAAqB,OAAO;AAAA,EACtD,UAAU,SAAS,SAAS;AAC9B,CAAC;AACM,IAAM,cAAc;AAE3B,iBAA6D,IAAI;;;A1B8B1D,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AACF,CAAC;AACM,IAAM,eAAe;AAGrB,IAAM,aAAa,qBAAqB,OAAO,CAAC,CAAC;AACjD,IAAM,YAAY;AAGlB,IAAM,WAAW,qBAAqB,OAAO;AAAA,EAClD,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AACM,IAAM,UAAU;AAGhB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,YAAY,eAAE,KAAK,CAAC,MAAM,CAAC,EAAE,QAAQ,MAAM;AAAA,EAC3C,kBAAkB,eAAE,QAAQ,EAAE,QAAQ,KAAK;AAC7C,CAAC;AAGM,IAAMC,wBAAuB,uBAAS,GAAG,eAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;AAEnE,IAAM,WAAW,kBAAkB,OAAO;AAAA,EAC/C,WAAW;AAAA,EACX,SAAS;AAAA,EACT,cAAc;AAAA,EACd,eAAe;AACjB,CAAC;AAGM,IAAM,gBAAgB,kBAAkB,OAAO;AAAA,EACpD,KAAK,eAAE,OAAO,EAAE,SAAS;AAC3B,CAAC;AAGM,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAO,eAAE,QAAQ,QAAQ;AAAA,IACzB,cAAc;AAAA,IACd,eAAe;AAAA,IACf,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAO,eAAE,QAAQ,MAAM;AAAA,IACvB,YAAY;AAAA,IACZ,aAAa;AAAA,IACb,YAAY;AAAA,IACZ,aAAa;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AACH,CAAC;AAGM,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAO,eAAE,QAAQ,QAAQ;AAAA,IACzB,QAAQ;AAAA,EACV,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,OAAO,eAAE,QAAQ,MAAM;AAAA,IACvB,OAAO;AAAA,IACP,QAAQ;AAAA,EACV,CAAC;AACH,CAAC;AAGM,IAAM,oBAAoB,eAAE,OAAO;AAAA,EACxC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,MAAM,eAAE,OAAO;AACjB,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AACN,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,QAAQ,eAAE,MAAM,mBAAK;AAAA,EACrB,UAAU,eAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC9C,WAAW,eAAE,KAAK,CAAC,OAAO,MAAM,CAAC,EAAE,SAAS;AAC9C,CAAC;AAGM,IAAM,iBAAiB;AAGvB,IAAM,mBAAmB,qBAAqB,OAAO;AAAA,EAC1D;AACF,CAAC;AAGM,IAAM,YAAY,kBAAkB,OAAO;AAAA,EAChD,MAAM,eAAE,OAAO;AAAA,EACf,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,SAAS,eAAE,MAAM,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC;AACF,CAAC;AAGM,IAAM,sBAAsB,eAAe,OAAO;AAAA,EACvD,MAAM,eAAE,OAAO;AAAA,EACf,iBAAiB,eACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAM,eAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAU,qBAAO,SAAS;AAC5B,CAAC;AAGM,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAO,eAAE,MAAM,8BAAgB;AAAA,EAC/B,aAAa,qBAAO,SAAS;AAC/B,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,aAAa;AAAA,EACb,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AACN,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAU,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAW,eAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAa,uBAAS,SAAS;AAAA,EAC/B,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAGI,IAAM,wBAAwB,eAClC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAU,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAW,eAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAa,uBAAS,SAAS;AAAA,EAC/B,QAAQ;AACV,CAAC;AAGI,IAAM,sBAAsB,eAAE,OAAO;AAAA,EAC1C,GAAG;AAAA,EACH,GAAG;AAAA,EACH,KAAK,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC1B,SAAS,wBAAU,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiB,eAAE,OAAO;AAAA,EACrC,KAAK,eACF,OAAO,EACP,SAAS,EACT;AAAA,IACC;AAAA,EACF;AAAA,EACF,OAAO,eAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,QAAQ,+BAAiB,GAAG,mBAAmB,EAAE,SAAS;AAAA,EAC1D,SAAS,eACN,MAAM,8BAAgB,EACtB,GAAG,eAAE,MAAM,mBAAmB,CAAC,EAC/B,SAAS;AAAA,EACZ,YAAY,eAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAIM,IAAM,gBAAgB,eAAE,OAAO;AAAA,EACpC,OAAO,eAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,WAAW,uBAAS,SAAS;AAAA,EAC7B,OAAO,eAAE,MAAM,8BAAgB;AACjC,CAAC;AAGM,IAAM,2BAA2B,eAAe,OAAO;AAAA,EAC5D,MAAM,eAAE,OAAO;AAAA,EACf,iBAAiB,eACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAM,eAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAU,qBAAO,SAAS;AAAA,EAC1B,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AAGM,IAAM,2BAA2B,eACrC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAO,eAAE,MAAM,8BAAgB;AAAA,EAC/B,aAAa,qBAAO,SAAS;AAAA,EAC7B,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;","names":["distanceOrMultiplier","import_soup","import_zod","import_zod","import_zod","import_soup","import_zod","import_zod","import_zod","import_zod","import_zod","import_soup","import_zod","import_soup","import_soup","import_zod","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_zod","import_zod","import_soup","import_zod","import_zod","import_zod","import_zod","import_zod","import_soup","import_soup","import_zod","import_zod","distanceOrMultiplier"]}

package/lib/components/battery.ts

@@ -0,0 +1,36 @@
+import { z } from "zod"
+import {
+  commonComponentProps,
+  lrPins,
+  lrPolarPins,
+  type CommonComponentProps,
+} from "lib/common/layout"
+import { expectTypesMatch } from "lib/typecheck"
+
+/** @deprecated use battery_capacity from circuit-json when circuit-json is updated */
+const capacity = z
+  .number()
+  .or(z.string().endsWith("mAh"))
+  .transform((v) => {
+    if (typeof v === "string") {
+      const valString = v.replace("mAh", "")
+      const num = Number.parseFloat(valString)
+      if (Number.isNaN(num)) {
+        throw new Error("Invalid capacity")
+      }
+      return num
+    }
+    return v
+  })
+  .describe("Battery capacity in mAh")
+
+export interface BatteryProps extends CommonComponentProps {
+  capacity?: number | string
+}
+
+export const batteryProps = commonComponentProps.extend({
+  capacity: capacity.optional(),
+})
+export const batteryPins = lrPolarPins
+
+expectTypesMatch<BatteryProps, z.input<typeof batteryProps>>(true)

package/lib/components/board.ts

@@ -15,6 +15,12 @@ export interface BoardProps {
   routingDisabled?: boolean
   children?: any
   defaultTraceWidth?: Distance
+  /**
+   * If true, we'll automatically layout the schematic for this group. Must be
+   * a subcircuit (currently). This is eventually going to be replaced with more
+   * sophisticated layout options/modes and will be enabled by default.
+   */
+  schAutoLayoutEnabled?: boolean
 }
 
 export const boardProps = z.object({
@@ -27,6 +33,7 @@ export const boardProps = z.object({
   routingDisabled: z.boolean().optional(),
   children: z.any(),
   defaultTraceWidth: distance.optional(),
+  schAutoLayoutEnabled: z.boolean().optional(),
 })
 
 expectTypesMatch<BoardProps, z.input<typeof boardProps>>(true)

package/lib/components/group.ts

@@ -15,6 +15,13 @@ export interface SubcircuitGroupProps extends BaseGroupProps {
   layout?: LayoutBuilder
   routingDisabled?: boolean
   defaultTraceWidth?: Distance
+
+  /**
+   * If true, we'll automatically layout the schematic for this group. Must be
+   * a subcircuit (currently). This is eventually going to be replaced with more
+   * sophisticated layout options/modes and will be enabled by default.
+   */
+  schAutoLayoutEnabled?: boolean
 }
 
 export type GroupProps = SubcircuitGroupProps | BaseGroupProps
@@ -27,6 +34,7 @@ export const baseGroupProps = commonLayoutProps.extend({
 export const subcircuitGroupProps = baseGroupProps.extend({
   subcircuit: z.literal(true),
   layout: z.custom<LayoutBuilder>((v) => true).optional(),
+  schAutoLayoutEnabled: z.boolean().optional(),
   routingDisabled: z.boolean().optional(),
   defaultTraceWidth: length.optional(),
 })

package/lib/index.ts

@@ -61,6 +61,7 @@ export * from "./components/solderpaste"
 export * from "./components/hole"
 export * from "./components/trace"
 export * from "./components/footprint"
+export * from "./components/battery"
 
 export const inductorProps = commonComponentProps.extend({
   inductance,

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@tscircuit/props",
-  "version": "0.0.73",
+  "version": "0.0.75",
   "description": "Props for tscircuit builtin component types",
   "main": "dist/index.js",
   "scripts": {
@@ -17,7 +17,7 @@
   "author": "",
   "license": "ISC",
   "devDependencies": {
-    "@biomejs/biome": "^1.9.3",
+    "@biomejs/biome": "^1.9.4",
     "@tscircuit/layout": "^0.0.11",
     "@tscircuit/soup": "^0.0.69",
     "@types/bun": "^1.1.8",