@tscircuit/props 0.0.702 → 0.0.704

package/README.md

@@ -2358,6 +2358,9 @@ export interface RectSmtPadProps extends Omit<PcbLayoutProps, "pcbRotation"> {
   solderMaskMarginRight?: Distance;
   solderMaskMarginTop?: Distance;
   solderMaskMarginBottom?: Distance;
+  // Disable solder paste without affecting the solder mask.
+  // Omitted or false preserves default paste behavior; true overrides solderPasteMargin.
+  noSolderPaste?: boolean;
   solderPasteMargin?: Distance;
 }
 ```
@@ -2476,6 +2479,20 @@ export interface SymbolProps {
   originalFacingDirection?: "up" | "down" | "left" | "right";
   width?: string | number;
   height?: string | number;
+  /** CSS-style fill (default) and stretch resize axes independently; contain preserves proportions. */
+  fit?: "fill" | "contain" | "stretch";
+  /**
+   * Source sizing bounds in the local symbol coordinate space (mm, +X right, +Y up).
+   * With width/height, maps the bounds center to the symbol position; all artwork
+   * and ports use the same transform. Omitted uses automatic bounds including ports.
+   * maxX must exceed minX and maxY must exceed minY. No aliases; no change to existing defaults.
+   */
+  viewbox?: {
+    minX: number | string;
+    maxX: number | string;
+    minY: number | string;
+    maxY: number | string;
+  };
   name?: string;
 }
 ```

package/dist/index.d.ts

@@ -156884,6 +156884,7 @@ interface RectSmtPadProps extends Omit<PcbLayoutProps, "pcbRotation"> {
     solderMaskMarginRight?: Distance;
     solderMaskMarginTop?: Distance;
     solderMaskMarginBottom?: Distance;
+    noSolderPaste?: boolean;
     solderPasteMargin?: Distance;
 }
 interface RotatedRectSmtPadProps extends Omit<PcbLayoutProps, "pcbRotation"> {
@@ -156900,6 +156901,7 @@ interface RotatedRectSmtPadProps extends Omit<PcbLayoutProps, "pcbRotation"> {
     solderMaskMarginRight?: Distance;
     solderMaskMarginTop?: Distance;
     solderMaskMarginBottom?: Distance;
+    noSolderPaste?: boolean;
     solderPasteMargin?: Distance;
 }
 interface CircleSmtPadProps extends Omit<PcbLayoutProps, "pcbRotation"> {
@@ -156909,6 +156911,7 @@ interface CircleSmtPadProps extends Omit<PcbLayoutProps, "pcbRotation"> {
     portHints?: PortHints;
     coveredWithSolderMask?: boolean;
     solderMaskMargin?: Distance;
+    noSolderPaste?: boolean;
     solderPasteMargin?: Distance;
 }
 interface PillSmtPadProps extends Omit<PcbLayoutProps, "pcbRotation"> {
@@ -156920,6 +156923,7 @@ interface PillSmtPadProps extends Omit<PcbLayoutProps, "pcbRotation"> {
     portHints?: PortHints;
     coveredWithSolderMask?: boolean;
     solderMaskMargin?: Distance;
+    noSolderPaste?: boolean;
     solderPasteMargin?: Distance;
 }
 interface RotatedPillSmtPadProps extends Omit<PcbLayoutProps, "pcbRotation"> {
@@ -156932,6 +156936,7 @@ interface RotatedPillSmtPadProps extends Omit<PcbLayoutProps, "pcbRotation"> {
     portHints?: PortHints;
     coveredWithSolderMask?: boolean;
     solderMaskMargin?: Distance;
+    noSolderPaste?: boolean;
     solderPasteMargin?: Distance;
 }
 interface PolygonSmtPadProps extends Omit<PcbLayoutProps, "pcbRotation"> {
@@ -156941,6 +156946,7 @@ interface PolygonSmtPadProps extends Omit<PcbLayoutProps, "pcbRotation"> {
     portHints?: PortHints;
     coveredWithSolderMask?: boolean;
     solderMaskMargin?: Distance;
+    noSolderPaste?: boolean;
     solderPasteMargin?: Distance;
 }
 type SmtPadProps = RectSmtPadProps | CircleSmtPadProps | RotatedRectSmtPadProps | PillSmtPadProps | RotatedPillSmtPadProps | PolygonSmtPadProps;
@@ -157023,6 +157029,7 @@ declare const rectSmtPadProps: z.ZodObject<Omit<{
     solderMaskMarginRight: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     solderMaskMarginTop: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     solderMaskMarginBottom: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    noSolderPaste: z.ZodOptional<z.ZodBoolean>;
     solderPasteMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }, "strip", z.ZodTypeAny, {
     shape: "rect";
@@ -157069,6 +157076,7 @@ declare const rectSmtPadProps: z.ZodObject<Omit<{
     solderMaskMarginRight?: number | undefined;
     solderMaskMarginTop?: number | undefined;
     solderMaskMarginBottom?: number | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: number | undefined;
 }, {
     shape: "rect";
@@ -157117,6 +157125,7 @@ declare const rectSmtPadProps: z.ZodObject<Omit<{
     solderMaskMarginRight?: string | number | undefined;
     solderMaskMarginTop?: string | number | undefined;
     solderMaskMarginBottom?: string | number | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: string | number | undefined;
 }>;
 declare const rotatedRectSmtPadProps: z.ZodObject<Omit<{
@@ -157198,6 +157207,7 @@ declare const rotatedRectSmtPadProps: z.ZodObject<Omit<{
     solderMaskMarginRight: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     solderMaskMarginTop: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     solderMaskMarginBottom: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    noSolderPaste: z.ZodOptional<z.ZodBoolean>;
     solderPasteMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }, "strip", z.ZodTypeAny, {
     shape: "rotated_rect";
@@ -157244,6 +157254,7 @@ declare const rotatedRectSmtPadProps: z.ZodObject<Omit<{
     solderMaskMarginRight?: number | undefined;
     solderMaskMarginTop?: number | undefined;
     solderMaskMarginBottom?: number | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: number | undefined;
 }, {
     shape: "rotated_rect";
@@ -157292,6 +157303,7 @@ declare const rotatedRectSmtPadProps: z.ZodObject<Omit<{
     solderMaskMarginRight?: string | number | undefined;
     solderMaskMarginTop?: string | number | undefined;
     solderMaskMarginBottom?: string | number | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: string | number | undefined;
 }>;
 declare const circleSmtPadProps: z.ZodObject<Omit<{
@@ -157366,6 +157378,7 @@ declare const circleSmtPadProps: z.ZodObject<Omit<{
     portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
     coveredWithSolderMask: z.ZodOptional<z.ZodBoolean>;
     solderMaskMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    noSolderPaste: z.ZodOptional<z.ZodBoolean>;
     solderPasteMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }, "strip", z.ZodTypeAny, {
     shape: "circle";
@@ -157405,6 +157418,7 @@ declare const circleSmtPadProps: z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: number | undefined;
 }, {
     shape: "circle";
@@ -157446,6 +157460,7 @@ declare const circleSmtPadProps: z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: string | number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: string | number | undefined;
 }>;
 declare const pillSmtPadProps: z.ZodObject<Omit<{
@@ -157522,6 +157537,7 @@ declare const pillSmtPadProps: z.ZodObject<Omit<{
     portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
     coveredWithSolderMask: z.ZodOptional<z.ZodBoolean>;
     solderMaskMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    noSolderPaste: z.ZodOptional<z.ZodBoolean>;
     solderPasteMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }, "strip", z.ZodTypeAny, {
     shape: "pill";
@@ -157563,6 +157579,7 @@ declare const pillSmtPadProps: z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: number | undefined;
 }, {
     shape: "pill";
@@ -157606,6 +157623,7 @@ declare const pillSmtPadProps: z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: string | number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: string | number | undefined;
 }>;
 declare const rotatedPillSmtPadProps: z.ZodObject<Omit<{
@@ -157683,6 +157701,7 @@ declare const rotatedPillSmtPadProps: z.ZodObject<Omit<{
     portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
     coveredWithSolderMask: z.ZodOptional<z.ZodBoolean>;
     solderMaskMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    noSolderPaste: z.ZodOptional<z.ZodBoolean>;
     solderPasteMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }, "strip", z.ZodTypeAny, {
     shape: "rotated_pill";
@@ -157725,6 +157744,7 @@ declare const rotatedPillSmtPadProps: z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: number | undefined;
 }, {
     shape: "rotated_pill";
@@ -157769,6 +157789,7 @@ declare const rotatedPillSmtPadProps: z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: string | number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: string | number | undefined;
 }>;
 declare const polygonSmtPadProps: z.ZodObject<Omit<{
@@ -157852,6 +157873,7 @@ declare const polygonSmtPadProps: z.ZodObject<Omit<{
     portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
     coveredWithSolderMask: z.ZodOptional<z.ZodBoolean>;
     solderMaskMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    noSolderPaste: z.ZodOptional<z.ZodBoolean>;
     solderPasteMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }, "strip", z.ZodTypeAny, {
     shape: "polygon";
@@ -157894,6 +157916,7 @@ declare const polygonSmtPadProps: z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: number | undefined;
 }, {
     shape: "polygon";
@@ -157938,6 +157961,7 @@ declare const polygonSmtPadProps: z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: string | number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: string | number | undefined;
 }>;
 declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
@@ -158012,6 +158036,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
     coveredWithSolderMask: z.ZodOptional<z.ZodBoolean>;
     solderMaskMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    noSolderPaste: z.ZodOptional<z.ZodBoolean>;
     solderPasteMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }, "strip", z.ZodTypeAny, {
     shape: "circle";
@@ -158051,6 +158076,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: number | undefined;
 }, {
     shape: "circle";
@@ -158092,6 +158118,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: string | number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: string | number | undefined;
 }>, z.ZodObject<Omit<{
     pcbX: z.ZodOptional<z.ZodUnion<[z.ZodString, z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>]>>;
@@ -158172,6 +158199,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     solderMaskMarginRight: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     solderMaskMarginTop: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     solderMaskMarginBottom: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    noSolderPaste: z.ZodOptional<z.ZodBoolean>;
     solderPasteMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }, "strip", z.ZodTypeAny, {
     shape: "rect";
@@ -158218,6 +158246,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     solderMaskMarginRight?: number | undefined;
     solderMaskMarginTop?: number | undefined;
     solderMaskMarginBottom?: number | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: number | undefined;
 }, {
     shape: "rect";
@@ -158266,6 +158295,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     solderMaskMarginRight?: string | number | undefined;
     solderMaskMarginTop?: string | number | undefined;
     solderMaskMarginBottom?: string | number | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: string | number | undefined;
 }>, z.ZodObject<Omit<{
     pcbX: z.ZodOptional<z.ZodUnion<[z.ZodString, z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>]>>;
@@ -158346,6 +158376,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     solderMaskMarginRight: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     solderMaskMarginTop: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     solderMaskMarginBottom: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    noSolderPaste: z.ZodOptional<z.ZodBoolean>;
     solderPasteMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }, "strip", z.ZodTypeAny, {
     shape: "rotated_rect";
@@ -158392,6 +158423,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     solderMaskMarginRight?: number | undefined;
     solderMaskMarginTop?: number | undefined;
     solderMaskMarginBottom?: number | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: number | undefined;
 }, {
     shape: "rotated_rect";
@@ -158440,6 +158472,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     solderMaskMarginRight?: string | number | undefined;
     solderMaskMarginTop?: string | number | undefined;
     solderMaskMarginBottom?: string | number | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: string | number | undefined;
 }>, z.ZodObject<Omit<{
     pcbX: z.ZodOptional<z.ZodUnion<[z.ZodString, z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>]>>;
@@ -158515,6 +158548,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
     coveredWithSolderMask: z.ZodOptional<z.ZodBoolean>;
     solderMaskMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    noSolderPaste: z.ZodOptional<z.ZodBoolean>;
     solderPasteMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }, "strip", z.ZodTypeAny, {
     shape: "pill";
@@ -158556,6 +158590,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: number | undefined;
 }, {
     shape: "pill";
@@ -158599,6 +158634,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: string | number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: string | number | undefined;
 }>, z.ZodObject<Omit<{
     pcbX: z.ZodOptional<z.ZodUnion<[z.ZodString, z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>]>>;
@@ -158675,6 +158711,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
     coveredWithSolderMask: z.ZodOptional<z.ZodBoolean>;
     solderMaskMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    noSolderPaste: z.ZodOptional<z.ZodBoolean>;
     solderPasteMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }, "strip", z.ZodTypeAny, {
     shape: "rotated_pill";
@@ -158717,6 +158754,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: number | undefined;
 }, {
     shape: "rotated_pill";
@@ -158761,6 +158799,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: string | number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: string | number | undefined;
 }>, z.ZodObject<Omit<{
     pcbX: z.ZodOptional<z.ZodUnion<[z.ZodString, z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>]>>;
@@ -158843,6 +158882,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     portHints: z.ZodOptional<z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodNumber]>, "many">>;
     coveredWithSolderMask: z.ZodOptional<z.ZodBoolean>;
     solderMaskMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    noSolderPaste: z.ZodOptional<z.ZodBoolean>;
     solderPasteMargin: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
 }, "strip", z.ZodTypeAny, {
     shape: "polygon";
@@ -158885,6 +158925,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: number | undefined;
 }, {
     shape: "polygon";
@@ -158929,6 +158970,7 @@ declare const smtPadProps: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<Omit<{
     portHints?: (string | number)[] | undefined;
     solderMaskMargin?: string | number | undefined;
     coveredWithSolderMask?: boolean | undefined;
+    noSolderPaste?: boolean | undefined;
     solderPasteMargin?: string | number | undefined;
 }>]>;
 type InferredSmtPadProps = z.input<typeof smtPadProps>;
@@ -166882,23 +166924,88 @@ interface SymbolProps {
     originalFacingDirection?: "up" | "down" | "left" | "right";
     width?: string | number;
     height?: string | number;
+    /** CSS-style fill (default) and stretch resize axes independently; contain preserves proportions. */
+    fit?: "fill" | "contain" | "stretch";
+    /**
+     * Source sizing bounds in the local symbol coordinate space (mm, +X right, +Y up).
+     * With width/height, maps the bounds center to the symbol position; all artwork
+     * and ports use the same transform. Omitted uses automatic bounds including ports.
+     * maxX must exceed minX and maxY must exceed minY. No aliases; no change to existing defaults.
+     */
+    viewbox?: {
+        minX: number | string;
+        maxX: number | string;
+        minY: number | string;
+        maxY: number | string;
+    };
     name?: string;
 }
 declare const symbolProps: z.ZodObject<{
     originalFacingDirection: z.ZodOptional<z.ZodDefault<z.ZodEnum<["up", "down", "left", "right"]>>>;
     width: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     height: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    fit: z.ZodOptional<z.ZodEnum<["fill", "contain", "stretch"]>>;
+    viewbox: z.ZodOptional<z.ZodEffects<z.ZodEffects<z.ZodObject<{
+        minX: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+        maxX: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+        minY: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+        maxY: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
+    }, "strip", z.ZodTypeAny, {
+        minX: number;
+        maxX: number;
+        minY: number;
+        maxY: number;
+    }, {
+        minX: string | number;
+        maxX: string | number;
+        minY: string | number;
+        maxY: string | number;
+    }>, {
+        minX: number;
+        maxX: number;
+        minY: number;
+        maxY: number;
+    }, {
+        minX: string | number;
+        maxX: string | number;
+        minY: string | number;
+        maxY: string | number;
+    }>, {
+        minX: number;
+        maxX: number;
+        minY: number;
+        maxY: number;
+    }, {
+        minX: string | number;
+        maxX: string | number;
+        minY: string | number;
+        maxY: string | number;
+    }>>;
     name: z.ZodOptional<z.ZodString>;
 }, "strip", z.ZodTypeAny, {
     width?: number | undefined;
     height?: number | undefined;
     name?: string | undefined;
     originalFacingDirection?: "up" | "down" | "left" | "right" | undefined;
+    fit?: "fill" | "stretch" | "contain" | undefined;
+    viewbox?: {
+        minX: number;
+        maxX: number;
+        minY: number;
+        maxY: number;
+    } | undefined;
 }, {
     width?: string | number | undefined;
     height?: string | number | undefined;
     name?: string | undefined;
     originalFacingDirection?: "up" | "down" | "left" | "right" | undefined;
+    fit?: "fill" | "stretch" | "contain" | undefined;
+    viewbox?: {
+        minX: string | number;
+        maxX: string | number;
+        minY: string | number;
+        maxY: string | number;
+    } | undefined;
 }>;
 type SymbolPropsInput = z.input<typeof symbolProps>;
 

package/dist/index.js

@@ -17985,6 +17985,7 @@ var rectSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
   solderMaskMarginRight: distance.optional(),
   solderMaskMarginTop: distance.optional(),
   solderMaskMarginBottom: distance.optional(),
+  noSolderPaste: z82.boolean().optional(),
   solderPasteMargin: distance.optional()
 });
 expectTypesMatch(true);
@@ -18002,6 +18003,7 @@ var rotatedRectSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
   solderMaskMarginRight: distance.optional(),
   solderMaskMarginTop: distance.optional(),
   solderMaskMarginBottom: distance.optional(),
+  noSolderPaste: z82.boolean().optional(),
   solderPasteMargin: distance.optional()
 });
 expectTypesMatch(true);
@@ -18012,6 +18014,7 @@ var circleSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
   portHints: portHints.optional(),
   coveredWithSolderMask: z82.boolean().optional(),
   solderMaskMargin: distance.optional(),
+  noSolderPaste: z82.boolean().optional(),
   solderPasteMargin: distance.optional()
 });
 expectTypesMatch(true);
@@ -18024,6 +18027,7 @@ var pillSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
   portHints: portHints.optional(),
   coveredWithSolderMask: z82.boolean().optional(),
   solderMaskMargin: distance.optional(),
+  noSolderPaste: z82.boolean().optional(),
   solderPasteMargin: distance.optional()
 });
 expectTypesMatch(true);
@@ -18037,6 +18041,7 @@ var rotatedPillSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
   portHints: portHints.optional(),
   coveredWithSolderMask: z82.boolean().optional(),
   solderMaskMargin: distance.optional(),
+  noSolderPaste: z82.boolean().optional(),
   solderPasteMargin: distance.optional()
 });
 expectTypesMatch(true);
@@ -18047,6 +18052,7 @@ var polygonSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
   portHints: portHints.optional(),
   coveredWithSolderMask: z82.boolean().optional(),
   solderMaskMargin: distance.optional(),
+  noSolderPaste: z82.boolean().optional(),
   solderPasteMargin: distance.optional()
 });
 expectTypesMatch(true);
@@ -18485,6 +18491,19 @@ var symbolProps = z93.object({
   originalFacingDirection: z93.enum(["up", "down", "left", "right"]).default("right").optional(),
   width: distance.optional(),
   height: distance.optional(),
+  fit: z93.enum(["fill", "contain", "stretch"]).optional(),
+  viewbox: z93.object({
+    minX: distance,
+    maxX: distance,
+    minY: distance,
+    maxY: distance
+  }).refine((bounds) => bounds.maxX > bounds.minX, {
+    message: "viewbox maxX must exceed minX",
+    path: ["maxX"]
+  }).refine((bounds) => bounds.maxY > bounds.minY, {
+    message: "viewbox maxY must exceed minY",
+    path: ["maxY"]
+  }).optional(),
   name: z93.string().optional()
 });
 expectTypesMatch(true);