@tscircuit/props 0.0.697 → 0.0.698

package/dist/index.js

@@ -18669,6 +18669,81 @@ var analogAcSweepSimulationProps = z103.object({
 });
 expectTypesMatch(true);
 
+// lib/components/pcb-return-current-excitation.ts
+import { layer_ref as layer_ref9 } from "circuit-json";
+import { z as z104 } from "zod";
+var selector = z104.string().trim().min(1, "Provide a nonempty selector");
+var quantity2 = "[+-]?(?:\\d+(?:\\.\\d*)?|\\.\\d+)(?:[eE][+-]?\\d+)?";
+var prefixScale = {
+  "": 1,
+  y: 1e-24,
+  z: 1e-21,
+  a: 1e-18,
+  f: 1e-15,
+  p: 1e-12,
+  n: 1e-9,
+  u: 1e-6,
+  \u00B5: 1e-6,
+  \u03BC: 1e-6,
+  m: 1e-3,
+  k: 1e3,
+  M: 1e6,
+  G: 1e9,
+  T: 1e12,
+  P: 1e15,
+  E: 1e18,
+  Z: 1e21,
+  Y: 1e24
+};
+function positiveQuantity(unit, label, example) {
+  const pattern = new RegExp(
+    `^(${quantity2})\\s*(?:([yzafpnumkMGTPEZY\xB5\u03BC]?)(?:${unit}))?$`
+  );
+  return z104.union([
+    z104.number(),
+    z104.string().trim().regex(pattern, `Use ${label} or a unit string, e.g. ${example}`)
+  ]).transform((value) => {
+    if (typeof value === "number") return value;
+    const match = pattern.exec(value);
+    return Number(match[1]) * prefixScale[match[2] ?? ""];
+  }).pipe(z104.number().finite().positive(`${label} must be greater than zero`));
+}
+var positiveCurrent = positiveQuantity("A", "peak amperes", "5mA");
+var positiveResistance = positiveQuantity(
+  "ohms?|Ohms?|\u03A9",
+  "real ohms",
+  "100ohm"
+);
+var pcbReturnCurrentExcitationProps = z104.object({
+  name: z104.string().trim().min(1).optional(),
+  source: selector,
+  load: selector,
+  ground: selector,
+  current: positiveCurrent,
+  returnSource: selector,
+  returnSink: selector,
+  sourceImpedance: positiveResistance,
+  loadImpedance: positiveResistance,
+  trace: selector.optional(),
+  returnSourceLayer: layer_ref9.optional(),
+  returnSinkLayer: layer_ref9.optional()
+}).strict();
+expectTypesMatch(true);
+
+// lib/components/pcb-return-current-simulation.ts
+import { z as z105 } from "zod";
+var pcbReturnCurrentSimulationProps = z105.object({
+  name: z105.string().trim().min(1).optional(),
+  children: z105.custom().optional()
+}).strict();
+expectTypesMatch(true);
+
+// lib/simulation/index.ts
+var simulationProps = {
+  pcbreturncurrentsimulation: pcbReturnCurrentSimulationProps,
+  pcbreturncurrentexcitation: pcbReturnCurrentExcitationProps
+};
+
 // lib/components/analogsweepparameter.ts
 import {
   capacitance as capacitance4,
@@ -18677,43 +18752,43 @@ import {
   resistance as resistance4,
   voltage as voltage4
 } from "circuit-json";
-import { z as z104 } from "zod";
-var resistanceSweepQuantity = resistance4.pipe(z104.number());
-var capacitanceSweepQuantity = capacitance4.pipe(z104.number());
-var inductanceSweepQuantity = inductance.pipe(z104.number());
-var voltageSweepQuantity = voltage4.pipe(z104.number());
-var currentSweepQuantity = current2.pipe(z104.number());
+import { z as z106 } from "zod";
+var resistanceSweepQuantity = resistance4.pipe(z106.number());
+var capacitanceSweepQuantity = capacitance4.pipe(z106.number());
+var inductanceSweepQuantity = inductance.pipe(z106.number());
+var voltageSweepQuantity = voltage4.pipe(z106.number());
+var currentSweepQuantity = current2.pipe(z106.number());
 var createAnalogSweepCoordinateProps = (sweepQuantity) => ({
-  name: z104.string().optional(),
-  values: z104.array(sweepQuantity).min(1).optional(),
+  name: z106.string().optional(),
+  values: z106.array(sweepQuantity).min(1).optional(),
   start: sweepQuantity.optional(),
   stop: sweepQuantity.optional(),
   step: sweepQuantity.optional()
 });
-var analogResistanceSweepParameterProps = z104.object({
+var analogResistanceSweepParameterProps = z106.object({
   ...createAnalogSweepCoordinateProps(resistanceSweepQuantity),
-  parameterType: z104.literal("resistance"),
-  resistorRef: z104.string().min(1)
+  parameterType: z106.literal("resistance"),
+  resistorRef: z106.string().min(1)
 }).strict();
-var analogCapacitanceSweepParameterProps = z104.object({
+var analogCapacitanceSweepParameterProps = z106.object({
   ...createAnalogSweepCoordinateProps(capacitanceSweepQuantity),
-  parameterType: z104.literal("capacitance"),
-  capacitorRef: z104.string().min(1)
+  parameterType: z106.literal("capacitance"),
+  capacitorRef: z106.string().min(1)
 }).strict();
-var analogInductanceSweepParameterProps = z104.object({
+var analogInductanceSweepParameterProps = z106.object({
   ...createAnalogSweepCoordinateProps(inductanceSweepQuantity),
-  parameterType: z104.literal("inductance"),
-  inductorRef: z104.string().min(1)
+  parameterType: z106.literal("inductance"),
+  inductorRef: z106.string().min(1)
 }).strict();
-var analogVoltageSweepParameterProps = z104.object({
+var analogVoltageSweepParameterProps = z106.object({
   ...createAnalogSweepCoordinateProps(voltageSweepQuantity),
-  parameterType: z104.literal("voltage"),
-  net: z104.string().min(1)
+  parameterType: z106.literal("voltage"),
+  net: z106.string().min(1)
 }).strict();
-var analogCurrentSweepParameterProps = z104.object({
+var analogCurrentSweepParameterProps = z106.object({
   ...createAnalogSweepCoordinateProps(currentSweepQuantity),
-  parameterType: z104.literal("current"),
-  currentSourceRef: z104.string().min(1)
+  parameterType: z106.literal("current"),
+  currentSourceRef: z106.string().min(1)
 }).strict();
 var validateAnalogSweepCoordinates = (sweepCoordinates, context) => {
   const hasExplicitSweepCoordinates = sweepCoordinates.values !== void 0;
@@ -18725,34 +18800,34 @@ var validateAnalogSweepCoordinates = (sweepCoordinates, context) => {
   const hasRangeCoordinates = rangeCoordinateCount > 0;
   if (hasExplicitSweepCoordinates === hasRangeCoordinates) {
     context.addIssue({
-      code: z104.ZodIssueCode.custom,
+      code: z106.ZodIssueCode.custom,
       message: "Provide either values or start/stop/step"
     });
     return;
   }
   if (rangeCoordinateCount !== 0 && rangeCoordinateCount !== 3) {
     context.addIssue({
-      code: z104.ZodIssueCode.custom,
+      code: z106.ZodIssueCode.custom,
       message: "start, stop, and step must be provided together"
     });
     return;
   }
   if (sweepCoordinates.step === 0) {
     context.addIssue({
-      code: z104.ZodIssueCode.custom,
+      code: z106.ZodIssueCode.custom,
       path: ["step"],
       message: "step must be nonzero"
     });
   }
   if (sweepCoordinates.start !== void 0 && sweepCoordinates.stop !== void 0 && sweepCoordinates.step !== void 0 && Math.sign(sweepCoordinates.stop - sweepCoordinates.start) !== Math.sign(sweepCoordinates.step)) {
     context.addIssue({
-      code: z104.ZodIssueCode.custom,
+      code: z106.ZodIssueCode.custom,
       path: ["step"],
       message: "step must move from start toward stop"
     });
   }
 };
-var analogSweepParameterProps = z104.discriminatedUnion("parameterType", [
+var analogSweepParameterProps = z106.discriminatedUnion("parameterType", [
   analogResistanceSweepParameterProps,
   analogCapacitanceSweepParameterProps,
   analogInductanceSweepParameterProps,
@@ -18767,26 +18842,26 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // lib/components/autoroutingphase.ts
-import { z as z105 } from "zod";
-var autoroutingPhaseProps = z105.object({
-  key: z105.any().optional(),
-  name: z105.string().optional(),
+import { z as z107 } from "zod";
+var autoroutingPhaseProps = z107.object({
+  key: z107.any().optional(),
+  name: z107.string().optional(),
   autorouter: autorouterProp.optional(),
   algorithmFn: autorouterConfig.shape.algorithmFn,
   preflightRoutingCheckPolicy: preflightRoutingCheckPolicy.optional(),
-  phaseIndex: z105.number().optional(),
-  pcbTracePaths: z105.array(fanoutTracePath).optional(),
+  phaseIndex: z107.number().optional(),
+  pcbTracePaths: z107.array(fanoutTracePath).optional(),
   ...routingTolerances.shape,
-  region: z105.object({
-    shape: z105.literal("rect").optional(),
-    minX: z105.number(),
-    maxX: z105.number(),
-    minY: z105.number(),
-    maxY: z105.number()
+  region: z107.object({
+    shape: z107.literal("rect").optional(),
+    minX: z107.number(),
+    maxX: z107.number(),
+    minY: z107.number(),
+    maxY: z107.number()
   }).optional(),
-  connection: z105.string().optional(),
-  connections: z105.array(z105.string()).optional(),
-  reroute: z105.boolean().optional(),
+  connection: z107.string().optional(),
+  connections: z107.array(z107.string()).optional(),
+  reroute: z107.boolean().optional(),
   ...fanoutProps.shape
 }).superRefine((value, ctx) => {
   const isSimplifyAutorouter = value.autorouter === "simplify" || typeof value.autorouter === "object" && value.autorouter?.preset === "simplify";
@@ -18797,7 +18872,7 @@ var autoroutingPhaseProps = z105.object({
   }
   if (value.reroute !== void 0 && !(isSimplifyAutorouter && value.reroute === true) && value.region === void 0 && value.connection === void 0 && value.connections === void 0) {
     ctx.addIssue({
-      code: z105.ZodIssueCode.custom,
+      code: z107.ZodIssueCode.custom,
       message: "region, connection, or connections is required when reroute is provided",
       path: ["region"]
     });
@@ -18806,15 +18881,15 @@ var autoroutingPhaseProps = z105.object({
 expectTypesMatch(true);
 
 // lib/components/spicemodel.ts
-import { z as z106 } from "zod";
-var spicemodelProps = z106.object({
-  source: z106.string(),
-  spicePinMapping: z106.record(z106.string(), z106.string()).optional()
+import { z as z108 } from "zod";
+var spicemodelProps = z108.object({
+  source: z108.string(),
+  spicePinMapping: z108.record(z108.string(), z108.string()).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/transistor.ts
-import { z as z107 } from "zod";
+import { z as z109 } from "zod";
 var transistorPinsLabels = [
   "pin1",
   "pin2",
@@ -18827,7 +18902,7 @@ var transistorPinsLabels = [
   "drain"
 ];
 var transistorProps = commonComponentProps.extend({
-  type: z107.enum(["npn", "pnp", "bjt", "jfet", "mosfet", "igbt"]),
+  type: z109.enum(["npn", "pnp", "bjt", "jfet", "mosfet", "igbt"]),
   connections: createConnectionsProp(transistorPinsLabels).optional()
 });
 var transistorPins = [
@@ -18841,7 +18916,7 @@ var transistorPins = [
 expectTypesMatch(true);
 
 // lib/components/mosfet.ts
-import { z as z108 } from "zod";
+import { z as z110 } from "zod";
 var mosfetPins = [
   "pin1",
   "drain",
@@ -18851,11 +18926,11 @@ var mosfetPins = [
   "gate"
 ];
 var mosfetProps = commonComponentProps.extend({
-  channelType: z108.enum(["n", "p"]),
-  mosfetMode: z108.enum(["enhancement", "depletion"]),
-  symbolDrainSide: z108.enum(["left", "right", "top", "bottom"]).optional(),
-  symbolSourceSide: z108.enum(["left", "right", "top", "bottom"]).optional(),
-  symbolGateSide: z108.enum(["left", "right", "top", "bottom"]).optional(),
+  channelType: z110.enum(["n", "p"]),
+  mosfetMode: z110.enum(["enhancement", "depletion"]),
+  symbolDrainSide: z110.enum(["left", "right", "top", "bottom"]).optional(),
+  symbolSourceSide: z110.enum(["left", "right", "top", "bottom"]).optional(),
+  symbolGateSide: z110.enum(["left", "right", "top", "bottom"]).optional(),
   connections: createConnectionsProp(mosfetPins).optional()
 });
 expectTypesMatch(true);
@@ -18877,29 +18952,29 @@ expectTypesMatch(true);
 
 // lib/components/inductor.ts
 import { inductance as inductance2 } from "circuit-json";
-import { z as z110 } from "zod";
+import { z as z112 } from "zod";
 var inductorPins = lrPins;
 var inductorProps = commonComponentProps.extend({
   inductance: inductance2,
-  maxCurrentRating: z110.union([z110.string(), z110.number()]).optional(),
+  maxCurrentRating: z112.union([z112.string(), z112.number()]).optional(),
   schOrientation: schematicOrientation.optional(),
   connections: createConnectionsProp(inductorPins).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/internal-circuit.ts
-import { z as z111 } from "zod";
-var internalCircuitProps = z111.object({
-  children: z111.custom().optional()
+import { z as z113 } from "zod";
+var internalCircuitProps = z113.object({
+  children: z113.custom().optional()
 });
 expectTypesMatch(
   true
 );
 
 // lib/components/diode.ts
-import { z as z112 } from "zod";
+import { z as z114 } from "zod";
 var diodePins = lrPolarPins;
-var diodeConnectionKeys = z112.enum([
+var diodeConnectionKeys = z114.enum([
   "anode",
   "cathode",
   "pin1",
@@ -18907,13 +18982,13 @@ var diodeConnectionKeys = z112.enum([
   "pos",
   "neg"
 ]);
-var connectionTarget3 = z112.string().or(z112.array(z112.string()).readonly()).or(z112.array(z112.string()));
-var connectionsProp2 = z112.record(diodeConnectionKeys, connectionTarget3);
-var diodePinLabelsProp = z112.record(
-  z112.enum(diodePins),
-  schematicPinLabel.or(z112.array(schematicPinLabel).readonly()).or(z112.array(schematicPinLabel))
+var connectionTarget3 = z114.string().or(z114.array(z114.string()).readonly()).or(z114.array(z114.string()));
+var connectionsProp2 = z114.record(diodeConnectionKeys, connectionTarget3);
+var diodePinLabelsProp = z114.record(
+  z114.enum(diodePins),
+  schematicPinLabel.or(z114.array(schematicPinLabel).readonly()).or(z114.array(schematicPinLabel))
 );
-var diodeVariant = z112.enum([
+var diodeVariant = z114.enum([
   "standard",
   "schottky",
   "zener",
@@ -18924,12 +18999,12 @@ var diodeVariant = z112.enum([
 var diodeProps = commonComponentProps.extend({
   connections: connectionsProp2.optional(),
   variant: diodeVariant.optional().default("standard"),
-  standard: z112.boolean().optional(),
-  schottky: z112.boolean().optional(),
-  zener: z112.boolean().optional(),
-  avalanche: z112.boolean().optional(),
-  photo: z112.boolean().optional(),
-  tvs: z112.boolean().optional(),
+  standard: z114.boolean().optional(),
+  schottky: z114.boolean().optional(),
+  zener: z114.boolean().optional(),
+  avalanche: z114.boolean().optional(),
+  photo: z114.boolean().optional(),
+  tvs: z114.boolean().optional(),
   schOrientation: schematicOrientation.optional(),
   schSize: schematicSymbolSize.optional(),
   pinLabels: diodePinLabelsProp.optional()
@@ -18944,11 +19019,11 @@ var diodeProps = commonComponentProps.extend({
   ].filter(Boolean).length;
   if (enabledFlags > 1) {
     ctx.addIssue({
-      code: z112.ZodIssueCode.custom,
+      code: z114.ZodIssueCode.custom,
       message: "Exactly one diode variant must be enabled",
       path: []
     });
-    return z112.INVALID;
+    return z114.INVALID;
   }
 }).transform((data) => {
   const result = {
@@ -18994,18 +19069,18 @@ var diodeProps = commonComponentProps.extend({
 expectTypesMatch(true);
 
 // lib/components/led.ts
-import { z as z113 } from "zod";
-var legacyNumericLedPinLabelsProp = z113.record(
-  z113.enum(["1", "2"]),
-  schematicPinLabel.or(z113.array(schematicPinLabel).readonly()).or(z113.array(schematicPinLabel))
+import { z as z115 } from "zod";
+var legacyNumericLedPinLabelsProp = z115.record(
+  z115.enum(["1", "2"]),
+  schematicPinLabel.or(z115.array(schematicPinLabel).readonly()).or(z115.array(schematicPinLabel))
 ).transform((pinLabels) => ({
   ...pinLabels["1"] === void 0 ? {} : { pin1: pinLabels["1"] },
   ...pinLabels["2"] === void 0 ? {} : { pin2: pinLabels["2"] }
 }));
 var ledProps = commonComponentProps.extend({
-  color: z113.string().optional(),
-  wavelength: z113.string().optional(),
-  schDisplayValue: z113.string().optional(),
+  color: z115.string().optional(),
+  wavelength: z115.string().optional(),
+  schDisplayValue: z115.string().optional(),
   schOrientation: schematicOrientation.optional(),
   /** Select a compact schematic symbol; omitted, default, and md retain the standard symbol. */
   schSize: schematicSymbolSize.optional(),
@@ -19013,28 +19088,28 @@ var ledProps = commonComponentProps.extend({
   // wrappers, then normalized to the canonical pin1/pin2 representation.
   pinLabels: diodePinLabelsProp.or(legacyNumericLedPinLabelsProp).optional(),
   connections: createConnectionsProp(lrPolarPins).optional(),
-  laser: z113.boolean().optional()
+  laser: z115.boolean().optional()
 });
 var ledPins = lrPolarPins;
 
 // lib/components/switch.ts
 import { ms as ms3, frequency as frequency4 } from "circuit-json";
-import { z as z114 } from "zod";
+import { z as z116 } from "zod";
 var switchProps = commonComponentProps.extend({
-  type: z114.enum(["spst", "spdt", "dpst", "dpdt"]).optional(),
-  isNormallyClosed: z114.boolean().optional().default(false),
-  spst: z114.boolean().optional(),
-  spdt: z114.boolean().optional(),
-  dpst: z114.boolean().optional(),
-  dpdt: z114.boolean().optional(),
+  type: z116.enum(["spst", "spdt", "dpst", "dpdt"]).optional(),
+  isNormallyClosed: z116.boolean().optional().default(false),
+  spst: z116.boolean().optional(),
+  spdt: z116.boolean().optional(),
+  dpst: z116.boolean().optional(),
+  dpdt: z116.boolean().optional(),
   pinLabels: pinLabelsProp.optional(),
   noConnect: noConnectProp.optional(),
   simSwitchFrequency: frequency4.optional(),
   simCloseAt: ms3.optional(),
   simOpenAt: ms3.optional(),
-  simStartClosed: z114.boolean().optional(),
-  simStartOpen: z114.boolean().optional(),
-  connections: z114.custom().pipe(z114.record(z114.string(), connectionTarget)).optional()
+  simStartClosed: z116.boolean().optional(),
+  simStartOpen: z116.boolean().optional(),
+  connections: z116.custom().pipe(z116.record(z116.string(), connectionTarget)).optional()
 }).transform((props) => {
   const updatedProps = { ...props };
   if (updatedProps.dpdt) {
@@ -19066,33 +19141,33 @@ expectTypesMatch(true);
 
 // lib/components/fabrication-note-text.ts
 import { length as length4 } from "circuit-json";
-import { z as z115 } from "zod";
+import { z as z117 } from "zod";
 var fabricationNoteTextProps = pcbLayoutProps.extend({
-  text: z115.string(),
-  anchorAlignment: z115.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  font: z115.enum(["tscircuit2024"]).optional(),
+  text: z117.string(),
+  anchorAlignment: z117.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  font: z117.enum(["tscircuit2024"]).optional(),
   fontSize: length4.optional(),
-  color: z115.string().optional()
+  color: z117.string().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/fabrication-note-rect.ts
 import { distance as distance25 } from "circuit-json";
-import { z as z116 } from "zod";
+import { z as z118 } from "zod";
 var fabricationNoteRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
   width: distance25,
   height: distance25,
   strokeWidth: distance25.optional(),
-  isFilled: z116.boolean().optional(),
-  hasStroke: z116.boolean().optional(),
-  isStrokeDashed: z116.boolean().optional(),
-  color: z116.string().optional(),
+  isFilled: z118.boolean().optional(),
+  hasStroke: z118.boolean().optional(),
+  isStrokeDashed: z118.boolean().optional(),
+  color: z118.string().optional(),
   cornerRadius: distance25.optional()
 });
 
 // lib/components/fabrication-note-path.ts
 import { length as length5, route_hint_point as route_hint_point3 } from "circuit-json";
-import { z as z117 } from "zod";
+import { z as z119 } from "zod";
 var fabricationNotePathProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -19104,19 +19179,19 @@ var fabricationNotePathProps = pcbLayoutProps.omit({
   pcbOffsetY: true,
   pcbRotation: true
 }).extend({
-  route: z117.array(route_hint_point3),
+  route: z119.array(route_hint_point3),
   strokeWidth: length5.optional(),
-  color: z117.string().optional(),
+  color: z119.string().optional(),
   /** Fill the route, closing its boundary implicitly. Omitted means false. */
-  isFilled: z117.boolean().optional(),
+  isFilled: z119.boolean().optional(),
   /** Draw the route's outline. Omitted means true; false disables it. */
-  hasStroke: z117.boolean().optional()
+  hasStroke: z119.boolean().optional()
 });
 
 // lib/components/fabrication-note-dimension.ts
 import { distance as distance26, length as length6 } from "circuit-json";
-import { z as z118 } from "zod";
-var dimensionTarget = z118.union([z118.string(), point]);
+import { z as z120 } from "zod";
+var dimensionTarget = z120.union([z120.string(), point]);
 var fabricationNoteDimensionProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -19130,44 +19205,44 @@ var fabricationNoteDimensionProps = pcbLayoutProps.omit({
 }).extend({
   from: dimensionTarget,
   to: dimensionTarget,
-  text: z118.string().optional(),
+  text: z120.string().optional(),
   offset: distance26.optional(),
-  offsetDirection: z118.object({ x: z118.number().finite(), y: z118.number().finite() }).optional(),
-  font: z118.enum(["tscircuit2024"]).optional(),
+  offsetDirection: z120.object({ x: z120.number().finite(), y: z120.number().finite() }).optional(),
+  font: z120.enum(["tscircuit2024"]).optional(),
   fontSize: length6.optional(),
-  color: z118.string().optional(),
+  color: z120.string().optional(),
   arrowSize: distance26.optional(),
-  units: z118.enum(["in", "mm"]).optional(),
-  outerEdgeToEdge: z118.literal(true).optional(),
-  centerToCenter: z118.literal(true).optional(),
-  innerEdgeToEdge: z118.literal(true).optional()
+  units: z120.enum(["in", "mm"]).optional(),
+  outerEdgeToEdge: z120.literal(true).optional(),
+  centerToCenter: z120.literal(true).optional(),
+  innerEdgeToEdge: z120.literal(true).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/pcb-trace.ts
 import { distance as distance27, route_hint_point as route_hint_point4 } from "circuit-json";
-import { z as z119 } from "zod";
-var pcbTraceProps = z119.object({
-  layer: z119.string().optional(),
+import { z as z121 } from "zod";
+var pcbTraceProps = z121.object({
+  layer: z121.string().optional(),
   thickness: distance27.optional(),
-  route: z119.array(route_hint_point4)
+  route: z121.array(route_hint_point4)
 });
 
 // lib/components/via.ts
-import { distance as distance28, layer_ref as layer_ref9 } from "circuit-json";
-import { z as z120 } from "zod";
+import { distance as distance28, layer_ref as layer_ref10 } from "circuit-json";
+import { z as z122 } from "zod";
 var viaProps = commonLayoutProps.extend({
-  name: z120.string().optional(),
-  fromLayer: layer_ref9.optional(),
-  toLayer: layer_ref9.optional(),
+  name: z122.string().optional(),
+  fromLayer: layer_ref10.optional(),
+  toLayer: layer_ref10.optional(),
   holeDiameter: distance28.optional(),
   outerDiameter: distance28.optional(),
-  layers: z120.array(layer_ref9).optional(),
-  connectsTo: z120.string().or(z120.array(z120.string())).optional(),
-  netIsAssignable: z120.boolean().optional(),
-  tented: z120.union([
-    z120.boolean(),
-    z120.enum([
+  layers: z122.array(layer_ref10).optional(),
+  connectsTo: z122.string().or(z122.array(z122.string())).optional(),
+  netIsAssignable: z122.boolean().optional(),
+  tented: z122.union([
+    z122.boolean(),
+    z122.enum([
       "both_sides",
       "top_and_bottom_tented",
       "top_tented",
@@ -19186,15 +19261,15 @@ expectTypesMatch(true);
 
 // lib/components/testpoint.ts
 import { distance as distance29 } from "circuit-json";
-import { z as z121 } from "zod";
+import { z as z123 } from "zod";
 var testpointPins = ["pin1"];
-var testpointConnectionsProp = z121.object({
+var testpointConnectionsProp = z123.object({
   pin1: connectionTarget
 }).strict();
 var testpointProps = commonComponentProps.extend({
   connections: testpointConnectionsProp.optional(),
-  footprintVariant: z121.enum(["pad", "through_hole"]).optional(),
-  padShape: z121.enum(["rect", "circle"]).optional().default("circle"),
+  footprintVariant: z123.enum(["pad", "through_hole"]).optional(),
+  padShape: z123.enum(["rect", "circle"]).optional().default("circle"),
   padDiameter: distance29.optional(),
   holeDiameter: distance29.optional(),
   width: distance29.optional(),
@@ -19206,42 +19281,42 @@ var testpointProps = commonComponentProps.extend({
 expectTypesMatch(true);
 
 // lib/components/breakoutpoint.ts
-import { z as z122 } from "zod";
+import { z as z124 } from "zod";
 var breakoutPointProps = pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
-  connection: z122.string()
+  connection: z124.string()
 });
 expectTypesMatch(true);
 
 // lib/components/pcb-keepout.ts
-import { distance as distance30, layer_ref as layer_ref10 } from "circuit-json";
-import { z as z123 } from "zod";
-var pcbKeepoutProps = z123.union([
+import { distance as distance30, layer_ref as layer_ref11 } from "circuit-json";
+import { z as z125 } from "zod";
+var pcbKeepoutProps = z125.union([
   pcbLayoutProps.omit({ pcbRotation: true }).extend({
-    shape: z123.literal("circle"),
+    shape: z125.literal("circle"),
     radius: distance30,
-    layers: z123.array(layer_ref10).optional(),
+    layers: z125.array(layer_ref11).optional(),
     /** Report keepout violations as warnings when true. Omit for normal enforcement. */
-    warningOnly: z123.boolean().optional(),
+    warningOnly: z125.boolean().optional(),
     /** Allow trace crossings without keepout diagnostics. False or omitted retains enforcement; copper pours remain excluded. */
-    allowTraces: z123.boolean().optional(),
+    allowTraces: z125.boolean().optional(),
     /** Allow components and their pads/plated holes without keepout diagnostics. False or omitted retains enforcement; copper pours remain excluded. */
-    allowPlacements: z123.boolean().optional(),
-    excludeRefs: z123.array(z123.string()).optional().describe(
+    allowPlacements: z125.boolean().optional(),
+    excludeRefs: z125.array(z125.string()).optional().describe(
       'Component selectors excluded from the keepout, such as ".ANT1"'
     )
   }),
   pcbLayoutProps.extend({
-    shape: z123.literal("rect"),
+    shape: z125.literal("rect"),
     width: distance30,
     height: distance30,
-    layers: z123.array(layer_ref10).optional(),
+    layers: z125.array(layer_ref11).optional(),
     /** Report keepout violations as warnings when true. Omit for normal enforcement. */
-    warningOnly: z123.boolean().optional(),
+    warningOnly: z125.boolean().optional(),
     /** Allow trace crossings without keepout diagnostics. False or omitted retains enforcement; copper pours remain excluded. */
-    allowTraces: z123.boolean().optional(),
+    allowTraces: z125.boolean().optional(),
     /** Allow components and their pads/plated holes without keepout diagnostics. False or omitted retains enforcement; copper pours remain excluded. */
-    allowPlacements: z123.boolean().optional(),
-    excludeRefs: z123.array(z123.string()).optional().describe(
+    allowPlacements: z125.boolean().optional(),
+    excludeRefs: z125.array(z125.string()).optional().describe(
       'Component selectors excluded from the keepout, such as ".ANT1"'
     )
   })
@@ -19249,20 +19324,20 @@ var pcbKeepoutProps = z123.union([
 
 // lib/components/courtyard-rect.ts
 import { distance as distance31 } from "circuit-json";
-import { z as z124 } from "zod";
+import { z as z126 } from "zod";
 var courtyardRectProps = pcbLayoutProps.extend({
   width: distance31,
   height: distance31,
   strokeWidth: distance31.optional(),
-  isFilled: z124.boolean().optional(),
-  hasStroke: z124.boolean().optional(),
-  isStrokeDashed: z124.boolean().optional(),
-  color: z124.string().optional()
+  isFilled: z126.boolean().optional(),
+  hasStroke: z126.boolean().optional(),
+  isStrokeDashed: z126.boolean().optional(),
+  color: z126.string().optional()
 });
 
 // lib/components/courtyard-outline.ts
 import { length as length7 } from "circuit-json";
-import { z as z125 } from "zod";
+import { z as z127 } from "zod";
 var courtyardOutlineProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -19274,11 +19349,11 @@ var courtyardOutlineProps = pcbLayoutProps.omit({
   pcbOffsetY: true,
   pcbRotation: true
 }).extend({
-  outline: z125.array(point),
+  outline: z127.array(point),
   strokeWidth: length7.optional(),
-  isClosed: z125.boolean().optional(),
-  isStrokeDashed: z125.boolean().optional(),
-  color: z125.string().optional()
+  isClosed: z127.boolean().optional(),
+  isStrokeDashed: z127.boolean().optional(),
+  color: z127.string().optional()
 });
 
 // lib/components/courtyard-circle.ts
@@ -19298,16 +19373,16 @@ var courtyardPillProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
 });
 
 // lib/components/copper-pour.ts
-import { z as z128 } from "zod";
-import { layer_ref as layer_ref11 } from "circuit-json";
-var copperPourProps = z128.object({
-  name: z128.string().optional(),
-  layer: layer_ref11,
-  connectsTo: z128.string(),
-  crosshatch: z128.boolean().optional(),
-  crosshatchPitch: distance.pipe(z128.number().finite().positive()).optional(),
-  crosshatchWidth: distance.pipe(z128.number().finite().positive()).optional(),
-  unbroken: z128.boolean().optional().describe(
+import { z as z130 } from "zod";
+import { layer_ref as layer_ref12 } from "circuit-json";
+var copperPourProps = z130.object({
+  name: z130.string().optional(),
+  layer: layer_ref12,
+  connectsTo: z130.string(),
+  crosshatch: z130.boolean().optional(),
+  crosshatchPitch: distance.pipe(z130.number().finite().positive()).optional(),
+  crosshatchWidth: distance.pipe(z130.number().finite().positive()).optional(),
+  unbroken: z130.boolean().optional().describe(
     "Reserves the pour region during autorouting so unrelated traces do not split it. Vias may still cross the region using antipads."
   ),
   padMargin: distance.optional(),
@@ -19315,13 +19390,13 @@ var copperPourProps = z128.object({
   clearance: distance.optional(),
   boardEdgeMargin: distance.optional(),
   cutoutMargin: distance.optional(),
-  useThermalReliefs: z128.boolean().optional(),
-  outline: z128.array(point).optional(),
-  coveredWithSolderMask: z128.boolean().optional().default(true)
+  useThermalReliefs: z130.boolean().optional(),
+  outline: z130.array(point).optional(),
+  coveredWithSolderMask: z130.boolean().optional().default(true)
 }).superRefine((props, ctx) => {
   if (props.crosshatch && (props.crosshatchWidth ?? 0.25) >= (props.crosshatchPitch ?? 1)) {
     ctx.addIssue({
-      code: z128.ZodIssueCode.custom,
+      code: z130.ZodIssueCode.custom,
       path: ["crosshatchWidth"],
       message: "crosshatchWidth must be less than crosshatchPitch"
     });
@@ -19330,17 +19405,17 @@ var copperPourProps = z128.object({
 expectTypesMatch(true);
 
 // lib/components/cadassembly.ts
-import { layer_ref as layer_ref12 } from "circuit-json";
-import { z as z129 } from "zod";
-var cadassemblyProps = z129.object({
-  originalLayer: layer_ref12.default("top").optional(),
-  children: z129.any().optional()
+import { layer_ref as layer_ref13 } from "circuit-json";
+import { z as z131 } from "zod";
+var cadassemblyProps = z131.object({
+  originalLayer: layer_ref13.default("top").optional(),
+  children: z131.any().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/cadmodel.ts
-import { z as z130 } from "zod";
-var pcbPosition = z130.object({
+import { z as z132 } from "zod";
+var pcbPosition = z132.object({
   pcbX: pcbCoordinate.optional(),
   pcbY: pcbCoordinate.optional(),
   pcbLeftEdgeX: pcbCoordinate.optional(),
@@ -19359,7 +19434,7 @@ var cadModelObject = cadModelBaseWithUrl.merge(pcbPosition);
 expectTypesMatch(true);
 var cadModelInputObject = cadModelBase.extend({
   /** Modelprinter specification or HTTP(S) URL; mutually exclusive with modelUrl. */
-  model: z130.string().trim().min(1).optional(),
+  model: z132.string().trim().min(1).optional(),
   modelUrl: url.optional()
 }).merge(pcbPosition).refine(
   (props) => props.model === void 0 !== (props.modelUrl === void 0),
@@ -19372,7 +19447,7 @@ var cadModelInputObject = cadModelBase.extend({
   modelUrl: model === void 0 ? props.modelUrl : /^https?:\/\//i.test(model) ? model : `https://modelcdn.tscircuit.com/jscad_models/${encodeURIComponent(model)}.glb`
 })).pipe(cadModelObject);
 expectTypesMatch(true);
-var cadmodelProps = z130.union([z130.null(), url, cadModelInputObject]);
+var cadmodelProps = z132.union([z132.null(), url, cadModelInputObject]);
 
 // lib/components/power-source.ts
 import { voltage as voltage5 } from "circuit-json";
@@ -19382,9 +19457,9 @@ var powerSourceProps = commonComponentProps.extend({
 
 // lib/components/voltagesource.ts
 import { frequency as frequency5, ms as ms4, rotation as rotation6, voltage as voltage6 } from "circuit-json";
-import { z as z131 } from "zod";
+import { z as z133 } from "zod";
 var voltageSourcePinLabels = ["pin1", "pin2", "pos", "neg"];
-var percentage = z131.union([z131.string(), z131.number()]).transform((val) => {
+var percentage = z133.union([z133.string(), z133.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -19393,13 +19468,13 @@ var percentage = z131.union([z131.string(), z131.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z131.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z133.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
 var voltageSourceProps = commonComponentProps.extend({
   voltage: voltage6.optional(),
   frequency: frequency5.optional(),
   peakToPeakVoltage: voltage6.optional(),
-  waveShape: z131.enum(["sinewave", "square", "triangle", "sawtooth"]).optional(),
+  waveShape: z133.enum(["sinewave", "square", "triangle", "sawtooth"]).optional(),
   phase: rotation6.optional(),
   dutyCycle: percentage.optional(),
   pulseDelay: ms4.optional(),
@@ -19416,9 +19491,9 @@ expectTypesMatch(true);
 
 // lib/components/currentsource.ts
 import { frequency as frequency6, rotation as rotation7, current as current3 } from "circuit-json";
-import { z as z132 } from "zod";
+import { z as z134 } from "zod";
 var currentSourcePinLabels = ["pin1", "pin2", "pos", "neg"];
-var percentage2 = z132.union([z132.string(), z132.number()]).transform((val) => {
+var percentage2 = z134.union([z134.string(), z134.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -19427,13 +19502,13 @@ var percentage2 = z132.union([z132.string(), z132.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z132.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z134.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
 var currentSourceProps = commonComponentProps.extend({
   current: current3.optional(),
   frequency: frequency6.optional(),
   peakToPeakCurrent: current3.optional(),
-  waveShape: z132.enum(["sinewave", "square", "triangle", "sawtooth"]).optional(),
+  waveShape: z134.enum(["sinewave", "square", "triangle", "sawtooth"]).optional(),
   phase: rotation7.optional(),
   dutyCycle: percentage2.optional(),
   acMagnitude: current3.optional(),
@@ -19444,21 +19519,21 @@ var currentSourcePins = lrPolarPins;
 expectTypesMatch(true);
 
 // lib/components/voltageprobe.ts
-import { z as z133 } from "zod";
+import { z as z135 } from "zod";
 var voltageProbeProps = commonComponentProps.omit({ name: true }).extend({
-  name: z133.string().optional(),
-  connectsTo: z133.string(),
-  referenceTo: z133.string().optional(),
-  color: z133.string().optional(),
-  graphDisplayName: z133.string().optional(),
-  graphCenter: z133.number().optional(),
-  graphVerticalOffset: z133.number().or(z133.string()).optional(),
-  graphVoltagePerDiv: z133.number().or(z133.string()).optional()
+  name: z135.string().optional(),
+  connectsTo: z135.string(),
+  referenceTo: z135.string().optional(),
+  color: z135.string().optional(),
+  graphDisplayName: z135.string().optional(),
+  graphCenter: z135.number().optional(),
+  graphVerticalOffset: z135.number().or(z135.string()).optional(),
+  graphVoltagePerDiv: z135.number().or(z135.string()).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/ammeter.ts
-import { z as z134 } from "zod";
+import { z as z136 } from "zod";
 var ammeterPinLabels = ["pin1", "pin2", "pos", "neg"];
 var hasAmmeterConnectionPair = (connections) => {
   return connections.pos !== void 0 && connections.neg !== void 0 || connections.pin1 !== void 0 && connections.pin2 !== void 0;
@@ -19468,64 +19543,64 @@ var ammeterProps = commonComponentProps.extend({
     hasAmmeterConnectionPair,
     "Ammeter connections must include either pos/neg or pin1/pin2"
   ),
-  color: z134.string().optional(),
-  graphDisplayName: z134.string().optional(),
-  graphCenter: z134.number().optional(),
-  graphVerticalOffset: z134.number().or(z134.string()).optional(),
-  graphCurrentPerDiv: z134.number().or(z134.string()).optional()
+  color: z136.string().optional(),
+  graphDisplayName: z136.string().optional(),
+  graphCenter: z136.number().optional(),
+  graphVerticalOffset: z136.number().or(z136.string()).optional(),
+  graphCurrentPerDiv: z136.number().or(z136.string()).optional()
 });
 var ammeterPins = ammeterPinLabels;
 expectTypesMatch(true);
 
 // lib/components/schematic-arc.ts
 import { distance as distance34, point as point5, rotation as rotation8 } from "circuit-json";
-import { z as z135 } from "zod";
-var schematicArcProps = z135.object({
+import { z as z137 } from "zod";
+var schematicArcProps = z137.object({
   center: point5,
   radius: distance34,
   startAngleDegrees: rotation8,
   endAngleDegrees: rotation8,
-  direction: z135.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
+  direction: z137.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
   strokeWidth: distance34.optional(),
-  color: z135.string().optional(),
-  isDashed: z135.boolean().optional().default(false)
+  color: z137.string().optional(),
+  isDashed: z137.boolean().optional().default(false)
 });
 expectTypesMatch(true);
 
 // lib/components/toolingrail.ts
-import { z as z136 } from "zod";
-var toolingrailProps = z136.object({
-  children: z136.any().optional()
+import { z as z138 } from "zod";
+var toolingrailProps = z138.object({
+  children: z138.any().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-box.ts
 import { distance as distance35 } from "circuit-json";
-import { z as z137 } from "zod";
-var schematicBoxProps = z137.object({
-  name: z137.string().optional(),
-  chipRef: z137.string().optional(),
+import { z as z139 } from "zod";
+var schematicBoxProps = z139.object({
+  name: z139.string().optional(),
+  chipRef: z139.string().optional(),
   pinLabels: pinLabelsProp.optional(),
   schPinArrangement: schematicPinArrangement.optional(),
   schPinStyle: schematicPinStyle.optional(),
   schX: distance35.optional(),
   schY: distance35.optional(),
-  schSectionName: z137.string().optional(),
-  schSheetName: z137.string().optional(),
+  schSectionName: z139.string().optional(),
+  schSheetName: z139.string().optional(),
   width: distance35.optional(),
   height: distance35.optional(),
-  overlay: z137.array(z137.string()).optional(),
+  overlay: z139.array(z139.string()).optional(),
   padding: distance35.optional(),
   paddingLeft: distance35.optional(),
   paddingRight: distance35.optional(),
   paddingTop: distance35.optional(),
   paddingBottom: distance35.optional(),
-  title: z137.string().optional(),
+  title: z139.string().optional(),
   titleAlignment: ninePointAnchor.default("top_left"),
-  titleColor: z137.string().optional(),
+  titleColor: z139.string().optional(),
   titleFontSize: distance35.optional(),
-  titleInside: z137.boolean().default(false),
-  strokeStyle: z137.enum(["solid", "dashed"]).default("solid")
+  titleInside: z139.boolean().default(false),
+  strokeStyle: z139.enum(["solid", "dashed"]).default("solid")
 }).refine(
   (elm) => elm.width !== void 0 && elm.height !== void 0 || Array.isArray(elm.overlay) && elm.overlay.length > 0,
   {
@@ -19541,21 +19616,21 @@ expectTypesMatch(true);
 
 // lib/components/schematic-symbol.ts
 import { rotation as rotation9 } from "circuit-json";
-import { z as z138 } from "zod";
-var schematicSymbolConnections = z138.custom().pipe(z138.record(z138.string(), connectionTarget)).refine((value) => Object.keys(value).length > 0, {
+import { z as z140 } from "zod";
+var schematicSymbolConnections = z140.custom().pipe(z140.record(z140.string(), connectionTarget)).refine((value) => Object.keys(value).length > 0, {
   message: "connections must map at least one schematic symbol port"
 });
-var schematicSymbolProps = z138.object({
-  name: z138.string().min(1),
-  displayName: z138.string().optional(),
-  chipRef: z138.string().min(1).optional(),
-  symbolName: z138.string().min(1),
+var schematicSymbolProps = z140.object({
+  name: z140.string().min(1),
+  displayName: z140.string().optional(),
+  chipRef: z140.string().min(1).optional(),
+  symbolName: z140.string().min(1),
   connections: schematicSymbolConnections.optional(),
   schX: distance.optional(),
   schY: distance.optional(),
   schRotation: rotation9.optional(),
-  schSectionName: z138.string().optional(),
-  schSheetName: z138.string().optional()
+  schSectionName: z140.string().optional(),
+  schSheetName: z140.string().optional()
 });
 expectTypesMatch(
   true
@@ -19563,15 +19638,15 @@ expectTypesMatch(
 
 // lib/components/schematic-circle.ts
 import { distance as distance36, point as point6 } from "circuit-json";
-import { z as z139 } from "zod";
-var schematicCircleProps = z139.object({
+import { z as z141 } from "zod";
+var schematicCircleProps = z141.object({
   center: point6,
   radius: distance36,
   strokeWidth: distance36.optional(),
-  color: z139.string().optional(),
-  isFilled: z139.boolean().optional().default(false),
-  fillColor: z139.string().optional(),
-  isDashed: z139.boolean().optional().default(false)
+  color: z141.string().optional(),
+  isFilled: z141.boolean().optional().default(false),
+  fillColor: z141.string().optional(),
+  isDashed: z141.boolean().optional().default(false)
 });
 expectTypesMatch(
   true
@@ -19579,32 +19654,32 @@ expectTypesMatch(
 
 // lib/components/schematic-rect.ts
 import { distance as distance37, rotation as rotation10 } from "circuit-json";
-import { z as z140 } from "zod";
-var schematicRectProps = z140.object({
+import { z as z142 } from "zod";
+var schematicRectProps = z142.object({
   schX: distance37.optional(),
   schY: distance37.optional(),
   width: distance37,
   height: distance37,
   rotation: rotation10.default(0),
   strokeWidth: distance37.optional(),
-  color: z140.string().optional(),
-  isFilled: z140.boolean().optional().default(false),
-  fillColor: z140.string().optional(),
-  isDashed: z140.boolean().optional().default(false)
+  color: z142.string().optional(),
+  isFilled: z142.boolean().optional().default(false),
+  fillColor: z142.string().optional(),
+  isDashed: z142.boolean().optional().default(false)
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-line.ts
 import { distance as distance38 } from "circuit-json";
-import { z as z141 } from "zod";
-var schematicLineProps = z141.object({
+import { z as z143 } from "zod";
+var schematicLineProps = z143.object({
   x1: distance38,
   y1: distance38,
   x2: distance38,
   y2: distance38,
   strokeWidth: distance38.optional(),
-  color: z141.string().optional(),
-  isDashed: z141.boolean().optional().default(false),
+  color: z143.string().optional(),
+  isDashed: z143.boolean().optional().default(false),
   dashLength: distance38.optional(),
   dashGap: distance38.optional()
 });
@@ -19612,11 +19687,11 @@ expectTypesMatch(true);
 
 // lib/components/schematic-text.ts
 import { distance as distance39, rotation as rotation11 } from "circuit-json";
-import { z as z143 } from "zod";
+import { z as z145 } from "zod";
 
 // lib/common/fivePointAnchor.ts
-import { z as z142 } from "zod";
-var fivePointAnchor = z142.enum([
+import { z as z144 } from "zod";
+var fivePointAnchor = z144.enum([
   "center",
   "left",
   "right",
@@ -19625,39 +19700,39 @@ var fivePointAnchor = z142.enum([
 ]);
 
 // lib/components/schematic-text.ts
-var schematicTextProps = z143.object({
+var schematicTextProps = z145.object({
   schX: distance39.optional(),
   schY: distance39.optional(),
-  text: z143.string(),
-  fontSize: z143.number().default(1),
-  anchor: z143.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
-  color: z143.string().default("#000000"),
+  text: z145.string(),
+  fontSize: z145.number().default(1),
+  anchor: z145.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
+  color: z145.string().default("#000000"),
   schRotation: rotation11.default(0)
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-path.ts
 import { distance as distance40, point as point7 } from "circuit-json";
-import { z as z144 } from "zod";
-var schematicPathProps = z144.object({
-  points: z144.array(point7).optional(),
-  svgPath: z144.string().optional(),
+import { z as z146 } from "zod";
+var schematicPathProps = z146.object({
+  points: z146.array(point7).optional(),
+  svgPath: z146.string().optional(),
   strokeWidth: distance40.optional(),
-  strokeColor: z144.string().optional(),
+  strokeColor: z146.string().optional(),
   dashLength: distance40.optional(),
   dashGap: distance40.optional(),
-  isFilled: z144.boolean().optional().default(false),
-  fillColor: z144.string().optional()
+  isFilled: z146.boolean().optional().default(false),
+  fillColor: z146.string().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-table.ts
 import { distance as distance41 } from "circuit-json";
-import { z as z145 } from "zod";
-var schematicTableProps = z145.object({
+import { z as z147 } from "zod";
+var schematicTableProps = z147.object({
   schX: distance41.optional(),
   schY: distance41.optional(),
-  children: z145.any().optional(),
+  children: z147.any().optional(),
   cellPadding: distance41.optional(),
   borderWidth: distance41.optional(),
   anchor: ninePointAnchor.optional(),
@@ -19667,34 +19742,34 @@ expectTypesMatch(true);
 
 // lib/components/schematic-row.ts
 import { distance as distance42 } from "circuit-json";
-import { z as z146 } from "zod";
-var schematicRowProps = z146.object({
-  children: z146.any().optional(),
+import { z as z148 } from "zod";
+var schematicRowProps = z148.object({
+  children: z148.any().optional(),
   height: distance42.optional()
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-cell.ts
 import { distance as distance43 } from "circuit-json";
-import { z as z147 } from "zod";
-var schematicCellProps = z147.object({
-  children: z147.string().optional(),
-  horizontalAlign: z147.enum(["left", "center", "right"]).optional(),
-  verticalAlign: z147.enum(["top", "middle", "bottom"]).optional(),
+import { z as z149 } from "zod";
+var schematicCellProps = z149.object({
+  children: z149.string().optional(),
+  horizontalAlign: z149.enum(["left", "center", "right"]).optional(),
+  verticalAlign: z149.enum(["top", "middle", "bottom"]).optional(),
   fontSize: distance43.optional(),
-  rowSpan: z147.number().optional(),
-  colSpan: z147.number().optional(),
+  rowSpan: z149.number().optional(),
+  colSpan: z149.number().optional(),
   width: distance43.optional(),
-  text: z147.string().optional()
+  text: z149.string().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-section.ts
 import { distance as distance44 } from "circuit-json";
-import { z as z148 } from "zod";
-var schematicSectionProps = z148.object({
-  displayName: z148.string().optional(),
-  name: z148.string(),
+import { z as z150 } from "zod";
+var schematicSectionProps = z150.object({
+  displayName: z150.string().optional(),
+  name: z150.string(),
   sectionTitleFontSize: distance44.optional()
 });
 expectTypesMatch(
@@ -19702,30 +19777,30 @@ expectTypesMatch(
 );
 
 // lib/components/schematic-sheet.ts
-import { z as z149 } from "zod";
+import { z as z151 } from "zod";
 import { distance as distance45 } from "circuit-json";
-var schematicSheetProps = z149.object({
-  name: z149.string().optional(),
-  displayName: z149.string().optional(),
-  sheetIndex: z149.number().optional(),
-  sheetSize: z149.enum(["A4", "ANSI_B"]).default("A4"),
-  sheetWidth: distance45.pipe(z149.number().positive()).optional(),
-  sheetHeight: distance45.pipe(z149.number().positive()).optional(),
-  children: z149.any().optional()
+var schematicSheetProps = z151.object({
+  name: z151.string().optional(),
+  displayName: z151.string().optional(),
+  sheetIndex: z151.number().optional(),
+  sheetSize: z151.enum(["A4", "ANSI_B"]).default("A4"),
+  sheetWidth: distance45.pipe(z151.number().positive()).optional(),
+  sheetHeight: distance45.pipe(z151.number().positive()).optional(),
+  children: z151.any().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-graphic.ts
-import { z as z150 } from "zod";
+import { z as z152 } from "zod";
 var nonemptyUrl = url.refine((value) => value.trim().length > 0, {
   message: "imageUrl cannot be empty"
 });
 var positiveDistance5 = (fieldName) => distance.refine((value) => Number.isFinite(value) && value > 0, {
   message: `${fieldName} must be a positive finite distance`
 });
-var schematicGraphicProps = z150.object({
+var schematicGraphicProps = z152.object({
   imageUrl: nonemptyUrl.optional(),
-  svgContent: z150.string().refine((value) => value.trim().length > 0, {
+  svgContent: z152.string().refine((value) => value.trim().length > 0, {
     message: "svgContent cannot be empty"
   }).optional(),
   width: positiveDistance5("width").optional(),
@@ -19733,7 +19808,7 @@ var schematicGraphicProps = z150.object({
 }).superRefine(({ imageUrl, svgContent }, ctx) => {
   if (imageUrl === void 0 && svgContent === void 0) {
     ctx.addIssue({
-      code: z150.ZodIssueCode.custom,
+      code: z152.ZodIssueCode.custom,
       message: "At least one of imageUrl or svgContent is required"
     });
   }
@@ -19743,41 +19818,41 @@ expectTypesMatch(
 );
 
 // lib/components/copper-text.ts
-import { layer_ref as layer_ref13, length as length8 } from "circuit-json";
-import { z as z151 } from "zod";
+import { layer_ref as layer_ref14, length as length8 } from "circuit-json";
+import { z as z153 } from "zod";
 var copperTextProps = pcbLayoutProps.extend({
-  text: z151.string(),
+  text: z153.string(),
   anchorAlignment: ninePointAnchor.default("center"),
-  font: z151.enum(["tscircuit2024"]).optional(),
+  font: z153.enum(["tscircuit2024"]).optional(),
   fontSize: length8.optional(),
-  layers: z151.array(layer_ref13).optional(),
-  knockout: z151.boolean().optional(),
-  mirrored: z151.boolean().optional()
+  layers: z153.array(layer_ref14).optional(),
+  knockout: z153.boolean().optional(),
+  mirrored: z153.boolean().optional()
 });
 
 // lib/components/silkscreen-text.ts
-import { layer_ref as layer_ref14, length as length9 } from "circuit-json";
-import { z as z152 } from "zod";
+import { layer_ref as layer_ref15, length as length9 } from "circuit-json";
+import { z as z154 } from "zod";
 var silkscreenTextProps = pcbLayoutProps.extend({
-  text: z152.string(),
+  text: z154.string(),
   anchorAlignment: ninePointAnchor.default("center"),
-  font: z152.enum(["tscircuit2024"]).optional(),
+  font: z154.enum(["tscircuit2024"]).optional(),
   fontSize: length9.optional(),
   /**
    * If true, text will knock out underlying silkscreen
    */
-  isKnockout: z152.boolean().optional(),
+  isKnockout: z154.boolean().optional(),
   knockoutPadding: length9.optional(),
   knockoutPaddingLeft: length9.optional(),
   knockoutPaddingRight: length9.optional(),
   knockoutPaddingTop: length9.optional(),
   knockoutPaddingBottom: length9.optional(),
-  layers: z152.array(layer_ref14).optional()
+  layers: z154.array(layer_ref15).optional()
 });
 
 // lib/components/silkscreen-path.ts
 import { length as length10, route_hint_point as route_hint_point5 } from "circuit-json";
-import { z as z153 } from "zod";
+import { z as z155 } from "zod";
 var silkscreenPathProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -19789,7 +19864,7 @@ var silkscreenPathProps = pcbLayoutProps.omit({
   pcbOffsetY: true,
   pcbRotation: true
 }).extend({
-  route: z153.array(route_hint_point5),
+  route: z155.array(route_hint_point5),
   strokeWidth: length10.optional()
 });
 
@@ -19811,10 +19886,10 @@ var silkscreenLineProps = pcbLayoutProps.omit({
 
 // lib/components/silkscreen-rect.ts
 import { distance as distance47 } from "circuit-json";
-import { z as z154 } from "zod";
+import { z as z156 } from "zod";
 var silkscreenRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  filled: z154.boolean().default(true).optional(),
-  stroke: z154.enum(["dashed", "solid", "none"]).optional(),
+  filled: z156.boolean().default(true).optional(),
+  stroke: z156.enum(["dashed", "solid", "none"]).optional(),
   strokeWidth: distance47.optional(),
   width: distance47,
   height: distance47,
@@ -19823,10 +19898,10 @@ var silkscreenRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
 
 // lib/components/silkscreen-circle.ts
 import { distance as distance48 } from "circuit-json";
-import { z as z155 } from "zod";
+import { z as z157 } from "zod";
 var silkscreenCircleProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  isFilled: z155.boolean().optional(),
-  isOutline: z155.boolean().optional(),
+  isFilled: z157.boolean().optional(),
+  isOutline: z157.boolean().optional(),
   strokeWidth: distance48.optional(),
   radius: distance48
 });
@@ -19843,70 +19918,70 @@ var silkscreenGraphicProps = pcbLayoutProps.omit({ layer: true, pcbStyle: true,
 expectTypesMatch(true);
 
 // lib/components/trace-hint.ts
-import { distance as distance49, layer_ref as layer_ref15, route_hint_point as route_hint_point6 } from "circuit-json";
-import { z as z157 } from "zod";
-var routeHintPointProps = z157.object({
+import { distance as distance49, layer_ref as layer_ref16, route_hint_point as route_hint_point6 } from "circuit-json";
+import { z as z159 } from "zod";
+var routeHintPointProps = z159.object({
   x: distance49,
   y: distance49,
-  via: z157.boolean().optional(),
-  toLayer: layer_ref15.optional()
+  via: z159.boolean().optional(),
+  toLayer: layer_ref16.optional()
 });
-var traceHintProps = z157.object({
-  for: z157.string().optional().describe(
+var traceHintProps = z159.object({
+  for: z159.string().optional().describe(
     "Selector for the port you're targeting, not required if you're inside a trace"
   ),
-  order: z157.number().optional(),
+  order: z159.number().optional(),
   offset: route_hint_point6.or(routeHintPointProps).optional(),
-  offsets: z157.array(route_hint_point6).or(z157.array(routeHintPointProps)).optional(),
-  traceWidth: z157.number().optional()
+  offsets: z159.array(route_hint_point6).or(z159.array(routeHintPointProps)).optional(),
+  traceWidth: z159.number().optional()
 });
 
 // lib/components/port.ts
 import { distance as distance50 } from "circuit-json";
-import { z as z158 } from "zod";
+import { z as z160 } from "zod";
 var portProps = commonLayoutProps.extend({
-  name: z158.string().optional(),
-  pinNumber: z158.number().optional(),
-  schStemLength: z158.number().optional(),
-  schPinLabelFontSize: z158.enum(["default", "sm"]).or(
+  name: z160.string().optional(),
+  pinNumber: z160.number().optional(),
+  schStemLength: z160.number().optional(),
+  schPinLabelFontSize: z160.enum(["default", "sm"]).or(
     distance50.refine((value) => Number.isFinite(value) && value > 0, {
       message: "Schematic pin-label font size must be positive and finite"
     })
   ).optional(),
-  aliases: z158.array(z158.string()).optional(),
-  layer: z158.string().optional(),
-  layers: z158.array(z158.string()).optional(),
-  schX: z158.number().optional(),
-  schY: z158.number().optional(),
+  aliases: z160.array(z160.string()).optional(),
+  layer: z160.string().optional(),
+  layers: z160.array(z160.string()).optional(),
+  schX: z160.number().optional(),
+  schY: z160.number().optional(),
   direction: direction.optional(),
-  connectsTo: z158.string().or(z158.array(z158.string())).optional(),
+  connectsTo: z160.string().or(z160.array(z160.string())).optional(),
   kicadPinMetadata: kicadPinMetadata.optional(),
-  hasInversionCircle: z158.boolean().optional()
+  hasInversionCircle: z160.boolean().optional()
 });
 
 // lib/components/pcb-note-text.ts
 import { length as length11 } from "circuit-json";
-import { z as z159 } from "zod";
+import { z as z161 } from "zod";
 var pcbNoteTextProps = pcbLayoutProps.extend({
-  text: z159.string(),
-  anchorAlignment: z159.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  font: z159.enum(["tscircuit2024"]).optional(),
+  text: z161.string(),
+  anchorAlignment: z161.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  font: z161.enum(["tscircuit2024"]).optional(),
   fontSize: length11.optional(),
-  color: z159.string().optional()
+  color: z161.string().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/pcb-note-rect.ts
 import { distance as distance51 } from "circuit-json";
-import { z as z160 } from "zod";
+import { z as z162 } from "zod";
 var pcbNoteRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
   width: distance51,
   height: distance51,
   strokeWidth: distance51.optional(),
-  isFilled: z160.boolean().optional(),
-  hasStroke: z160.boolean().optional(),
-  isStrokeDashed: z160.boolean().optional(),
-  color: z160.string().optional(),
+  isFilled: z162.boolean().optional(),
+  hasStroke: z162.boolean().optional(),
+  isStrokeDashed: z162.boolean().optional(),
+  color: z162.string().optional(),
   cornerRadius: distance51.optional()
 });
 expectTypesMatch(true);
@@ -19916,7 +19991,7 @@ import {
   length as length12,
   route_hint_point as route_hint_point7
 } from "circuit-json";
-import { z as z161 } from "zod";
+import { z as z163 } from "zod";
 var pcbNotePathProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -19928,15 +20003,15 @@ var pcbNotePathProps = pcbLayoutProps.omit({
   pcbOffsetY: true,
   pcbRotation: true
 }).extend({
-  route: z161.array(route_hint_point7),
+  route: z163.array(route_hint_point7),
   strokeWidth: length12.optional(),
-  color: z161.string().optional()
+  color: z163.string().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/pcb-note-line.ts
 import { distance as distance52 } from "circuit-json";
-import { z as z162 } from "zod";
+import { z as z164 } from "zod";
 var pcbNoteLineProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -19953,15 +20028,15 @@ var pcbNoteLineProps = pcbLayoutProps.omit({
   x2: distance52,
   y2: distance52,
   strokeWidth: distance52.optional(),
-  color: z162.string().optional(),
-  isDashed: z162.boolean().optional()
+  color: z164.string().optional(),
+  isDashed: z164.boolean().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/pcb-note-dimension.ts
 import { distance as distance53, length as length13 } from "circuit-json";
-import { z as z163 } from "zod";
-var dimensionTarget2 = z163.union([z163.string(), point]);
+import { z as z165 } from "zod";
+var dimensionTarget2 = z165.union([z165.string(), point]);
 var pcbNoteDimensionProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -19975,117 +20050,117 @@ var pcbNoteDimensionProps = pcbLayoutProps.omit({
 }).extend({
   from: dimensionTarget2,
   to: dimensionTarget2,
-  text: z163.string().optional(),
+  text: z165.string().optional(),
   offset: distance53.optional(),
-  offsetDirection: z163.object({ x: z163.number().finite(), y: z163.number().finite() }).optional(),
-  font: z163.enum(["tscircuit2024"]).optional(),
+  offsetDirection: z165.object({ x: z165.number().finite(), y: z165.number().finite() }).optional(),
+  font: z165.enum(["tscircuit2024"]).optional(),
   fontSize: length13.optional(),
-  color: z163.string().optional(),
+  color: z165.string().optional(),
   arrowSize: distance53.optional(),
-  units: z163.enum(["in", "mm"]).optional(),
-  outerEdgeToEdge: z163.literal(true).optional(),
-  centerToCenter: z163.literal(true).optional(),
-  innerEdgeToEdge: z163.literal(true).optional()
+  units: z165.enum(["in", "mm"]).optional(),
+  outerEdgeToEdge: z165.literal(true).optional(),
+  centerToCenter: z165.literal(true).optional(),
+  innerEdgeToEdge: z165.literal(true).optional()
 });
 expectTypesMatch(
   true
 );
 
 // lib/platformConfig.ts
-import { z as z164 } from "zod";
-var unvalidatedCircuitJson = z164.array(z164.any()).describe("Circuit JSON");
-var footprintLibraryResult = z164.object({
-  footprintCircuitJson: z164.array(z164.any()),
+import { z as z166 } from "zod";
+var unvalidatedCircuitJson = z166.array(z166.any()).describe("Circuit JSON");
+var footprintLibraryResult = z166.object({
+  footprintCircuitJson: z166.array(z166.any()),
   cadModel: cadModelProp.optional()
 });
-var pathToCircuitJsonFn = z164.function().args(z164.string()).returns(z164.promise(footprintLibraryResult)).or(
-  z164.function().args(
-    z164.string(),
-    z164.object({ resolvedPcbStyle: pcbStyle.optional() }).optional()
-  ).returns(z164.promise(footprintLibraryResult))
+var pathToCircuitJsonFn = z166.function().args(z166.string()).returns(z166.promise(footprintLibraryResult)).or(
+  z166.function().args(
+    z166.string(),
+    z166.object({ resolvedPcbStyle: pcbStyle.optional() }).optional()
+  ).returns(z166.promise(footprintLibraryResult))
 ).describe("A function that takes a path and returns Circuit JSON");
-var footprintFileParserEntry = z164.object({
-  loadFromUrl: z164.function().args(z164.string()).returns(z164.promise(footprintLibraryResult)).describe(
+var footprintFileParserEntry = z166.object({
+  loadFromUrl: z166.function().args(z166.string()).returns(z166.promise(footprintLibraryResult)).describe(
     "A function that takes a footprint file URL and returns Circuit JSON"
   )
 });
-var spiceEngineSimulationResult = z164.object({
-  engineVersionString: z164.string().optional(),
+var spiceEngineSimulationResult = z166.object({
+  engineVersionString: z166.string().optional(),
   simulationResultCircuitJson: unvalidatedCircuitJson
 });
-var spiceEngineZod = z164.object({
-  simulate: z164.function().args(z164.string()).returns(z164.promise(spiceEngineSimulationResult)).describe(
+var spiceEngineZod = z166.object({
+  simulate: z166.function().args(z166.string()).returns(z166.promise(spiceEngineSimulationResult)).describe(
     "A function that takes a SPICE string and returns a simulation result"
   )
 });
-var defaultSpiceEngine = z164.custom(
+var defaultSpiceEngine = z166.custom(
   (value) => typeof value === "string"
 );
-var autorouterInstance = z164.object({
-  run: z164.function().args().returns(z164.promise(z164.unknown())).describe("Run the autorouter"),
-  getOutputSimpleRouteJson: z164.function().args().returns(z164.promise(z164.any())).describe("Get the resulting SimpleRouteJson")
+var autorouterInstance = z166.object({
+  run: z166.function().args().returns(z166.promise(z166.unknown())).describe("Run the autorouter"),
+  getOutputSimpleRouteJson: z166.function().args().returns(z166.promise(z166.any())).describe("Get the resulting SimpleRouteJson")
 });
-var autorouterDefinition = z164.object({
-  createAutorouter: z164.function().args(z164.any(), z164.any().optional()).returns(z164.union([autorouterInstance, z164.promise(autorouterInstance)])).describe("Create an autorouter instance")
+var autorouterDefinition = z166.object({
+  createAutorouter: z166.function().args(z166.any(), z166.any().optional()).returns(z166.union([autorouterInstance, z166.promise(autorouterInstance)])).describe("Create an autorouter instance")
 });
-var platformFetch = z164.custom((value) => typeof value === "function").describe("A fetch-like function to use for platform requests");
-var localCacheEngine = z164.custom(
+var platformFetch = z166.custom((value) => typeof value === "function").describe("A fetch-like function to use for platform requests");
+var localCacheEngine = z166.custom(
   (value) => typeof value === "object" && value !== null && "getItem" in value && typeof value.getItem === "function" && "setItem" in value && typeof value.setItem === "function"
 );
-var fabricatorEngine = z164.custom(
+var fabricatorEngine = z166.custom(
   (value) => typeof value === "object" && value !== null && "runDrcChecks" in value && typeof value.runDrcChecks === "function"
 );
-var platformConfig = z164.object({
+var platformConfig = z166.object({
   partsEngine: partsEngine.optional(),
-  checkAvailability: z164.boolean().describe(
+  checkAvailability: z166.boolean().describe(
     "Opt in to networked JLCPCB availability checks during rendering. Disabled by default; enabling adds non-deterministic diagnostics."
   ).optional(),
   fabricatorEngine: fabricatorEngine.optional(),
   autorouter: autorouterProp.optional(),
-  autorouterMap: z164.record(z164.string(), autorouterDefinition).optional(),
-  allowLegacyAutorouters: z164.boolean().optional(),
+  autorouterMap: z166.record(z166.string(), autorouterDefinition).optional(),
+  allowLegacyAutorouters: z166.boolean().optional(),
   registryApiUrl: url.optional(),
   cloudAutorouterUrl: url.optional(),
-  projectName: z164.string().optional(),
+  projectName: z166.string().optional(),
   projectBaseUrl: url.optional(),
-  version: z164.string().optional(),
+  version: z166.string().optional(),
   url: url.optional(),
-  printBoardInformationToSilkscreen: z164.boolean().optional(),
-  includeBoardFiles: z164.array(z164.string()).describe(
+  printBoardInformationToSilkscreen: z166.boolean().optional(),
+  includeBoardFiles: z166.array(z166.string()).describe(
     'The board files to automatically build with "tsci build", defaults to ["**/*.circuit.tsx"]. Can be an array of files or globs'
   ).optional(),
-  snapshotsDir: z164.string().describe(
+  snapshotsDir: z166.string().describe(
     'The directory where snapshots are stored for "tsci snapshot", defaults to "tests/__snapshots__"'
   ).optional(),
   defaultSpiceEngine: defaultSpiceEngine.optional(),
-  unitPreference: z164.enum(["mm", "in", "mil"]).optional(),
+  unitPreference: z166.enum(["mm", "in", "mil"]).optional(),
   localCacheEngine: localCacheEngine.optional(),
-  useCloudAutorouter: z164.boolean().optional(),
-  enablePartOrientationAnalysis: z164.boolean().optional(),
-  pcbPackSolverTimeoutMs: z164.number().finite().positive().optional(),
-  pcbDisabled: z164.boolean().optional(),
-  routingDisabled: z164.boolean().optional(),
-  schematicDisabled: z164.boolean().optional(),
-  partsEngineDisabled: z164.boolean().optional(),
-  analogSimulationDisabled: z164.boolean().optional(),
-  drcChecksDisabled: z164.boolean().optional(),
-  netlistDrcChecksDisabled: z164.boolean().optional(),
-  routingDrcChecksDisabled: z164.boolean().optional(),
-  placementDrcChecksDisabled: z164.boolean().optional(),
-  pinSpecificationDrcChecksDisabled: z164.boolean().optional(),
-  spiceEngineMap: z164.record(z164.string(), spiceEngineZod).optional(),
-  footprintLibraryMap: z164.record(
-    z164.string(),
-    z164.union([
+  useCloudAutorouter: z166.boolean().optional(),
+  enablePartOrientationAnalysis: z166.boolean().optional(),
+  pcbPackSolverTimeoutMs: z166.number().finite().positive().optional(),
+  pcbDisabled: z166.boolean().optional(),
+  routingDisabled: z166.boolean().optional(),
+  schematicDisabled: z166.boolean().optional(),
+  partsEngineDisabled: z166.boolean().optional(),
+  analogSimulationDisabled: z166.boolean().optional(),
+  drcChecksDisabled: z166.boolean().optional(),
+  netlistDrcChecksDisabled: z166.boolean().optional(),
+  routingDrcChecksDisabled: z166.boolean().optional(),
+  placementDrcChecksDisabled: z166.boolean().optional(),
+  pinSpecificationDrcChecksDisabled: z166.boolean().optional(),
+  spiceEngineMap: z166.record(z166.string(), spiceEngineZod).optional(),
+  footprintLibraryMap: z166.record(
+    z166.string(),
+    z166.union([
       pathToCircuitJsonFn,
-      z164.record(
-        z164.string(),
-        z164.union([unvalidatedCircuitJson, pathToCircuitJsonFn])
+      z166.record(
+        z166.string(),
+        z166.union([unvalidatedCircuitJson, pathToCircuitJsonFn])
       )
     ])
   ).optional(),
-  footprintFileParserMap: z164.record(z164.string(), footprintFileParserEntry).optional(),
-  resolveProjectStaticFileImportUrl: z164.function().args(z164.string()).returns(z164.promise(z164.string())).describe(
+  footprintFileParserMap: z166.record(z166.string(), footprintFileParserEntry).optional(),
+  resolveProjectStaticFileImportUrl: z166.function().args(z166.string()).returns(z166.promise(z166.string())).describe(
     "A function that returns a string URL for static files for the project"
   ).optional(),
   platformFetch: platformFetch.optional()
@@ -20300,6 +20375,8 @@ export {
   pcbNoteTextProps,
   pcbPath,
   pcbPathPoint,
+  pcbReturnCurrentExcitationProps,
+  pcbReturnCurrentSimulationProps,
   pcbSameXConstraintProps,
   pcbSameYConstraintProps,
   pcbSoldermaskOpeningProps,
@@ -20374,6 +20451,7 @@ export {
   silkscreenPathProps,
   silkscreenRectProps,
   silkscreenTextProps,
+  simulationProps,
   smtPadProps,
   solderPasteProps,
   solderjumperProps,