@tscircuit/props 0.0.682 → 0.0.684

package/README.md

@@ -420,17 +420,16 @@ export interface BoardProps extends Omit<
   "subcircuit" | "connections" | "outline"
 > {
   title?: string;
-  /**
-   * Assembly mounting target, such as "NEMA17.backface". Trimmed; omitted
-   * leaves the board unattached. The target face is resolved by the consumer.
-   */
+  /** e.g. "NEMA17.backface". */
   mountedTo?: string;
-  /**
-   * Nonnegative finite clearance between the target mounting face and the
-   * nearest PCB surface, in millimeters or a unit string. Parsed to mm.
-   * Omitted leaves the gap unset; only meaningful when mountedTo is supplied.
-   */
+  /** Clearance from the mounting face, e.g. "6mm". */
   mountGap?: Distance;
+  /** e.g. "J_USB" or "rightedge". */
+  mountRotationAnchor?: BoardMountRotationAnchor;
+  /** e.g. "calc(NEMA17.wireside-90degcw)". */
+  mountRotation?: string;
+  /** e.g. "top_layer_toward_mount_face". */
+  mountOrientation?: BoardMountOrientation;
   /** Fabricator preset, preserved as supplied. Omitted leaves the preset unset. */
   fabricatorPreset?:
     | "jlcpcb_economy"
@@ -566,14 +565,34 @@ export interface BreakoutPointProps extends Omit<
 ```ts
 export interface BusProps {
   name?: string;
+  /** Match these trace/port/bus/pair selectors as well as this element's members.
+   * maxLengthSkew applies to the combined members; no tolerance is inferred. */
+  lengthMatchTo?: string | string[];
+  /** Minimum/maximum pad-to-pad planar length for each member. Raw numbers are mm. */
+  minLength?: RouteLength;
+  maxLength?: RouteLength;
+  /** Nominal member length, absolute or relative to selected endpoints.
+   * Requires an explicit lengthTolerance, including zero for exact matching. */
+  targetLength?: RouteLength;
+  /** Allowed deviation above/below targetLength, in mm. */
+  lengthTolerance?: number | string;
+  /** Minimum centreline spacing between bus members, excluding declared pair partners.
+   * Raw numbers are mm; "3w" means three times the larger local trace width. */
+  pcbTraceSpacing?: TraceSpacing;
+  /** Minimum centreline spacing to traces outside this bus/pair (mm or e.g. "4w"). */
+  pcbSpacingToOtherSignals?: TraceSpacing;
+
   /** One or more trace names or port selectors for the connections in the bus. */
   connections: string[];
   /** If set, every trace in this bus is assigned to this autorouting phase. */
   routingPhaseIndex?: number | null;
   /** Maximum routed-length difference between bus members. Raw numbers are millimeters. */
   maxLengthSkew?: number | string;
-  /** Intended single-ended characteristic impedance. Raw numbers are ohms. */
-  targetImpedance?: number | string;
+  /** Intended single-ended impedance, e.g. "50±25ohm". Raw numbers are ohms. */
+  targetImpedance?: ImpedanceTarget;
+  /** Inclusive minimum/maximum acceptable impedance, in ohms. May be used without a nominal target. */
+  targetImpedanceMin?: number | string;
+  targetImpedanceMax?: number | string;
   /** Explicit PCB trace width for every bus member. Raw numbers are millimeters. */
   pcbTraceWidth?: number | string;
   /** PCB layers on which the bus may be routed. */
@@ -886,14 +905,31 @@ export interface RectCutoutProps extends Omit<
 ```ts
 export interface DifferentialPairProps {
   name?: string;
+  /** Match these trace/port/bus/pair selectors as well as this element's members.
+   * maxLengthSkew applies to the combined members; no tolerance is inferred. */
+  lengthMatchTo?: string | string[];
+  /** Minimum/maximum pad-to-pad planar length for each member. Raw numbers are mm. */
+  minLength?: RouteLength;
+  maxLength?: RouteLength;
+  /** Nominal member length, absolute or relative to selected endpoints.
+   * Requires an explicit lengthTolerance, including zero for exact matching. */
+  targetLength?: RouteLength;
+  /** Allowed deviation above/below targetLength, in mm. */
+  lengthTolerance?: number | string;
+  /** Minimum centreline spacing to traces outside this bus/pair (mm or e.g. "4w"). */
+  pcbSpacingToOtherSignals?: TraceSpacing;
+
   /** Name of the trace or pin carrying the positive signal. */
   positiveConnection: string;
   /** Name of the trace or pin carrying the negative signal. */
   negativeConnection: string;
   /** Maximum permitted routed-length skew. Raw numbers are millimeters. */
   maxLengthSkew?: number | string;
-  /** Intended differential characteristic impedance. Raw numbers are ohms. */
-  targetDifferentialImpedance?: number | string;
+  /** Intended differential impedance, e.g. "100±10ohm". Raw numbers are ohms. */
+  targetDifferentialImpedance?: ImpedanceTarget;
+  /** Inclusive minimum/maximum acceptable impedance, in ohms. May be used without a nominal target. */
+  targetDifferentialImpedanceMin?: number | string;
+  targetDifferentialImpedanceMax?: number | string;
   /** Edge-to-edge PCB copper gap between the pair. Raw numbers are millimeters. */
   pcbTraceGap?: number | string;
   /** Maximum length over which the pair may be routed without coupling. Raw numbers are millimeters. */