@tscircuit/props 0.0.68 → 0.0.69

package/dist/index.d.ts

@@ -1353,7 +1353,7 @@ declare const boardProps: z.ZodObject<{
 
 interface ChipProps extends CommonComponentProps {
     manufacturerPartNumber?: string;
-    pinLabels?: Record<number | string, string>;
+    pinLabels?: Record<number | string, string | string[]>;
     schPortArrangement?: SchematicPortArrangement;
     schPinStyle?: SchematicPinStyle;
     schPinSpacing?: Distance;
@@ -1618,7 +1618,7 @@ declare const chipProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.exten
     symbolName: z.ZodOptional<z.ZodString>;
 }>, {
     manufacturerPartNumber: z.ZodOptional<z.ZodString>;
-    pinLabels: z.ZodOptional<z.ZodRecord<z.ZodUnion<[z.ZodNumber, z.ZodString]>, z.ZodString>>;
+    pinLabels: z.ZodOptional<z.ZodRecord<z.ZodUnion<[z.ZodNumber, z.ZodString]>, z.ZodUnion<[z.ZodString, z.ZodArray<z.ZodString, "many">]>>>;
     schPortArrangement: z.ZodOptional<z.ZodObject<{
         leftSize: z.ZodOptional<z.ZodNumber>;
         topSize: z.ZodOptional<z.ZodNumber>;
@@ -1806,7 +1806,7 @@ declare const chipProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.exten
     children?: any;
     symbolName?: string | undefined;
     manufacturerPartNumber?: string | undefined;
-    pinLabels?: Record<string | number, string> | undefined;
+    pinLabels?: Record<string | number, string | string[]> | undefined;
     schPortArrangement?: {
         leftSize?: number | undefined;
         topSize?: number | undefined;
@@ -1912,7 +1912,7 @@ declare const chipProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.exten
     children?: any;
     symbolName?: string | undefined;
     manufacturerPartNumber?: string | undefined;
-    pinLabels?: Record<string | number, string> | undefined;
+    pinLabels?: Record<string | number, string | string[]> | undefined;
     schPortArrangement?: {
         leftSize?: number | undefined;
         topSize?: number | undefined;
@@ -2210,7 +2210,7 @@ declare const bugProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.extend
     symbolName: z.ZodOptional<z.ZodString>;
 }>, {
     manufacturerPartNumber: z.ZodOptional<z.ZodString>;
-    pinLabels: z.ZodOptional<z.ZodRecord<z.ZodUnion<[z.ZodNumber, z.ZodString]>, z.ZodString>>;
+    pinLabels: z.ZodOptional<z.ZodRecord<z.ZodUnion<[z.ZodNumber, z.ZodString]>, z.ZodUnion<[z.ZodString, z.ZodArray<z.ZodString, "many">]>>>;
     schPortArrangement: z.ZodOptional<z.ZodObject<{
         leftSize: z.ZodOptional<z.ZodNumber>;
         topSize: z.ZodOptional<z.ZodNumber>;
@@ -2398,7 +2398,7 @@ declare const bugProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.extend
     children?: any;
     symbolName?: string | undefined;
     manufacturerPartNumber?: string | undefined;
-    pinLabels?: Record<string | number, string> | undefined;
+    pinLabels?: Record<string | number, string | string[]> | undefined;
     schPortArrangement?: {
         leftSize?: number | undefined;
         topSize?: number | undefined;
@@ -2504,7 +2504,7 @@ declare const bugProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.extend
     children?: any;
     symbolName?: string | undefined;
     manufacturerPartNumber?: string | undefined;
-    pinLabels?: Record<string | number, string> | undefined;
+    pinLabels?: Record<string | number, string | string[]> | undefined;
     schPortArrangement?: {
         leftSize?: number | undefined;
         topSize?: number | undefined;

package/dist/index.js

@@ -286,7 +286,7 @@ var import_zod11 = require("zod");
 var import_soup6 = require("@tscircuit/soup");
 var chipProps = commonComponentProps.extend({
   manufacturerPartNumber: import_zod11.z.string().optional(),
-  pinLabels: import_zod11.z.record(import_zod11.z.number().or(import_zod11.z.string()), import_zod11.z.string()).optional(),
+  pinLabels: import_zod11.z.record(import_zod11.z.number().or(import_zod11.z.string()), import_zod11.z.string().or(import_zod11.z.array(import_zod11.z.string()))).optional(),
   schPortArrangement: schematicPortArrangement.optional(),
   schPinStyle: schematicPinStyle.optional(),
   schPinSpacing: import_soup6.distance.optional(),

package/dist/index.js.map

@@ -1 +1 @@
-{"version":3,"sources":["../lib/index.ts","../lib/typecheck.ts","../lib/common/direction.ts","../lib/common/portHints.ts","../lib/common/layout.ts","../lib/common/point3.ts","../lib/common/cadModel.ts","../lib/common/footprintProp.ts","../lib/common/schematicPinDefinitions.ts","../lib/common/schematicPinStyle.ts","../lib/components/board.ts","../lib/common/point.ts","../lib/components/chip.ts","../lib/components/jumper.ts","../lib/components/resistor.ts","../lib/components/capacitor.ts","../lib/components/group.ts","../lib/components/net.ts","../lib/components/constrainedlayout.ts","../lib/common/distance.ts","../lib/components/constraint.ts","../lib/components/smtpad.ts","../lib/components/solderpaste.ts","../lib/components/hole.ts","../lib/components/trace.ts","../lib/components/footprint.ts"],"sourcesContent":["/**\n * THINKING ABOUT ADDING SOMETHING TO THIS FILE?\n *\n * THINK AGAIN!\n *\n * This file is TOO BIG! Create files using the pattern in the surrounding\n * directories, then export from this file.\n */\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport {\n  type AnySoupElementInput,\n  capacitance,\n  distance,\n  inductance,\n  layer_ref,\n  length,\n  type PCBPlatedHoleInput,\n  type PCBSMTPadInput,\n  point,\n  resistance,\n  rotation,\n  route_hint_point,\n  supplier_name,\n  voltage,\n} from \"@tscircuit/soup\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\nimport { direction } from \"./common/direction\"\nimport { portHints } from \"./common/portHints\"\nimport {\n  commonComponentProps,\n  commonLayoutProps,\n  lrPins,\n  lrPolarPins,\n  pcbLayoutProps,\n} from \"./common/layout\"\nimport { explicitPinSideDefinition } from \"./common/schematicPinDefinitions\"\n\nexport * from \"./common/direction\"\nexport * from \"./common/portHints\"\nexport * from \"./common/layout\"\nexport * from \"./common/point3\"\nexport * from \"./common/portHints\"\nexport * from \"./common/footprintProp\"\nexport * from \"./common/schematicPinDefinitions\"\nexport * from \"./common/schematicPinStyle\"\nexport * from \"./common/cadModel\"\n\nexport * from \"./components/board\"\nexport * from \"./components/chip\"\nexport * from \"./components/jumper\"\n\nexport * from \"./components/resistor\"\nexport * from \"./components/capacitor\"\nexport * from \"./components/group\"\nexport * from \"./components/net\"\nexport * from \"./components/constrainedlayout\"\nexport * from \"./components/constraint\"\nexport * from \"./components/smtpad\"\nexport * from \"./components/solderpaste\"\nexport * from \"./components/hole\"\nexport * from \"./components/trace\"\nexport * from \"./components/footprint\"\n\nexport const inductorProps = commonComponentProps.extend({\n  inductance,\n})\nexport const inductorPins = lrPins\nexport type InductorProps = z.input<typeof inductorProps>\n\nexport const diodeProps = commonComponentProps.extend({})\nexport const diodePins = lrPolarPins\nexport type DiodeProps = z.input<typeof diodeProps>\n\nexport const ledProps = commonComponentProps.extend({\n  color: z.string().optional(),\n})\nexport const ledPins = lrPolarPins\nexport type LedProps = z.input<typeof ledProps>\n\nexport const switchProps = commonComponentProps.extend({\n  ftype: z.literal(\"switch\"),\n  switchType: z.enum([\"spst\"]).default(\"spst\"),\n  isNormallyClosed: z.boolean().default(false),\n})\nexport type SwitchProps = z.input<typeof switchProps>\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n\nexport const viaProps = commonLayoutProps.extend({\n  fromLayer: layer_ref,\n  toLayer: layer_ref,\n  holeDiameter: distance,\n  outerDiameter: distance,\n})\nexport type ViaProps = z.input<typeof viaProps>\n\nexport const netAliasProps = commonLayoutProps.extend({\n  net: z.string().optional(),\n})\nexport type NetAliasProps = z.input<typeof netAliasProps>\n\nexport const platedHoleProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"circle\"),\n    holeDiameter: distance,\n    outerDiameter: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"oval\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n])\nexport type PlatedHoleProps = z.input<typeof platedHoleProps>\n\nexport const pcbKeepoutProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  }),\n  pcbLayoutProps.extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  }),\n])\nexport type PcbKeepoutProps = z.input<typeof pcbKeepoutProps>\n\nexport const schematicBoxProps = z.object({\n  schX: distance,\n  schY: distance,\n  width: distance,\n  height: distance,\n})\nexport type SchematicBoxProps = z.input<typeof schematicBoxProps>\n\nexport const schematicTextProps = z.object({\n  schX: distance,\n  schY: distance,\n  text: z.string(),\n})\nexport type SchematicTextProps = z.input<typeof schematicTextProps>\n\nexport const schematicLineProps = z.object({\n  x1: distance,\n  y1: distance,\n  x2: distance,\n  y2: distance,\n})\nexport type SchematicLineProps = z.input<typeof schematicLineProps>\n\nexport const schematicPathProps = z.object({\n  points: z.array(point),\n  isFilled: z.boolean().optional().default(false),\n  fillColor: z.enum([\"red\", \"blue\"]).optional(),\n})\nexport type SchematicPathProps = z.input<typeof schematicPathProps>\n\nexport const componentProps = commonComponentProps\nexport type ComponentProps = z.input<typeof componentProps>\n\nexport const powerSourceProps = commonComponentProps.extend({\n  voltage,\n})\nexport type PowerSourceProps = z.input<typeof powerSourceProps>\n\nexport const portProps = commonLayoutProps.extend({\n  name: z.string(),\n  pinNumber: z.number().optional(),\n  aliases: z.array(z.string()).optional(),\n  direction: direction,\n})\nexport type PortProps = z.input<typeof portProps>\n\nexport const silkscreenTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type SilkscreenTextProps = z.input<typeof silkscreenTextProps>\n\nexport const silkscreenPathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type SilkscreenPathProps = z.input<typeof silkscreenPathProps>\n\nexport const silkscreenLineProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    strokeWidth: distance,\n    x1: distance,\n    y1: distance,\n    x2: distance,\n    y2: distance,\n  })\nexport type SilkscreenLineProps = z.input<typeof silkscreenLineProps>\n\nexport const silkscreenRectProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    width: distance,\n    height: distance,\n  })\nexport type SilkscreenRectProps = z.input<typeof silkscreenRectProps>\n\nexport const silkscreenCircleProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    radius: distance,\n  })\nexport type SilkscreenCircleProps = z.input<typeof silkscreenCircleProps>\n\nexport const routeHintPointProps = z.object({\n  x: distance,\n  y: distance,\n  via: z.boolean().optional(),\n  toLayer: layer_ref.optional(),\n})\n\nexport const traceHintProps = z.object({\n  for: z\n    .string()\n    .optional()\n    .describe(\n      \"Selector for the port you're targeting, not required if you're inside a trace\",\n    ),\n  order: z.number().optional(),\n  offset: route_hint_point.or(routeHintPointProps).optional(),\n  offsets: z\n    .array(route_hint_point)\n    .or(z.array(routeHintPointProps))\n    .optional(),\n  traceWidth: z.number().optional(),\n})\n\nexport type TraceHintProps = z.input<typeof traceHintProps>\n\nexport const pcbTraceProps = z.object({\n  layer: z.string().optional(),\n  thickness: distance.optional(),\n  route: z.array(route_hint_point),\n})\nexport type PcbTraceProps = z.input<typeof pcbTraceProps>\n\nexport const fabricationNoteTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n  color: z.string().optional(),\n})\nexport type FabricationNoteTextProps = z.input<typeof fabricationNoteTextProps>\n\nexport const fabricationNotePathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n    color: z.string().optional(),\n  })\nexport type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>\n","import type { TypeEqual } from \"ts-expect\"\n\nexport const expectTypesMatch = <const T1, const T2>(\n  shouldBe: TypeEqual<T1, T2>,\n): void => {}\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nexport const direction = z.enum([\"up\", \"down\", \"left\", \"right\"])\nexport type Direction = \"up\" | \"down\" | \"left\" | \"right\"\n\nexport type DirectionAlongEdge =\n  | \"top-to-bottom\"\n  | \"left-to-right\"\n  | \"bottom-to-top\"\n  | \"right-to-left\"\n\nexport const directionAlongEdge = z.enum([\n  \"top-to-bottom\",\n  \"left-to-right\",\n  \"bottom-to-top\",\n  \"right-to-left\",\n])\n\nexpectTypesMatch<Direction, z.infer<typeof direction>>(true)\nexpectTypesMatch<DirectionAlongEdge, z.infer<typeof directionAlongEdge>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const portHints = z.array(z.string().or(z.number()))\nexport type PortHints = (string | number)[]\n\nexpectTypesMatch<PortHints, z.infer<typeof portHints>>(true)\n","import { z } from \"zod\"\nimport {\n  type AnySoupElementInput,\n  distance,\n  layer_ref,\n  type LayerRef,\n  type LayerRefInput,\n  rotation,\n  supplier_name,\n} from \"@tscircuit/soup\"\nimport { point3 } from \"./point3\"\nimport {\n  cadModelJscad,\n  cadModelObj,\n  cadModelProp,\n  cadModelStl,\n  type CadModelJscad,\n  type CadModelObj,\n  type CadModelProp,\n  type CadModelStl,\n} from \"./cadModel\"\nimport { footprintProp, type Footprint } from \"./footprintProp\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface PcbLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n  layer?: LayerRefInput\n}\n\nexport interface CommonLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n\n  schX?: string | number\n  schY?: string | number\n  schRotation?: string | number\n\n  layer?: LayerRefInput\n  footprint?: Footprint\n}\n\nexport const pcbLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n})\ntype InferredPcbLayoutProps = z.input<typeof pcbLayoutProps>\nexpectTypesMatch<PcbLayoutProps, InferredPcbLayoutProps>(true)\n\nexport const commonLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n  footprint: footprintProp.optional(),\n})\n\ntype InferredCommonLayoutProps = z.input<typeof commonLayoutProps>\nexpectTypesMatch<CommonLayoutProps, InferredCommonLayoutProps>(true)\n\nexport type SupplierName =\n  | \"jlcpcb\"\n  | \"macrofab\"\n  | \"pcbway\"\n  | \"digikey\"\n  | \"mouser\"\n  | \"lcsc\"\nexport interface SupplierProps {\n  supplierPartNumbers?: { [k in SupplierName]?: string[] }\n}\nexport const supplierProps = z.object({\n  supplierPartNumbers: z.record(supplier_name, z.array(z.string())).optional(),\n})\n\nexpectTypesMatch<SupplierProps, z.input<typeof supplierProps>>(true)\n\nexport interface CommonComponentProps extends CommonLayoutProps {\n  key?: any\n  name: string\n  supplierPartNumbers?: SupplierProps[\"supplierPartNumbers\"]\n  cadModel?: CadModelProp\n  children?: any\n  symbolName?: string\n}\n\nexport const commonComponentProps = commonLayoutProps\n  .merge(supplierProps)\n  .extend({\n    key: z.any().optional(),\n    name: z.string(),\n    cadModel: cadModelProp.optional(),\n    children: z.any().optional(),\n    symbolName: z.string().optional(),\n  })\n\ntype InferredCommonComponentProps = z.input<typeof commonComponentProps>\nexpectTypesMatch<CommonComponentProps, InferredCommonComponentProps>(true)\n\nexport const lrPins = [\"pin1\", \"left\", \"pin2\", \"right\"] as const\nexport const lrPolarPins = [\n  \"pin1\",\n  \"left\",\n  \"anode\",\n  \"pos\",\n  \"pin2\",\n  \"right\",\n  \"cathode\",\n  \"neg\",\n] as const\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n","import { distance } from \"@tscircuit/soup\"\nimport { z } from \"zod\"\n\nexport const point3 = z.object({\n  x: distance,\n  y: distance,\n  z: distance,\n})\n","import { z } from \"zod\"\nimport { point3 } from \"./point3\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const rotationPoint3 = z.object({\n  x: z.union([z.number(), z.string()]),\n  y: z.union([z.number(), z.string()]),\n  z: z.union([z.number(), z.string()]),\n})\n\nexport interface CadModelBase {\n  rotationOffset?:\n    | number\n    | { x: number | string; y: number | string; z: number | string }\n  positionOffset?: {\n    x: number | string\n    y: number | string\n    z: number | string\n  }\n  size?: { x: number | string; y: number | string; z: number | string }\n}\n\nexport const cadModelBase = z.object({\n  rotationOffset: z.number().or(rotationPoint3).optional(),\n  positionOffset: point3.optional(),\n  size: point3.optional(),\n})\n\nexpectTypesMatch<CadModelBase, z.input<typeof cadModelBase>>(true)\n\nexport interface CadModelStl extends CadModelBase {\n  stlUrl: string\n}\nexport const cadModelStl = cadModelBase.extend({\n  stlUrl: z.string(),\n})\n\nexport interface CadModelObj extends CadModelBase {\n  objUrl: string\n  mtlUrl?: string\n}\nexport const cadModelObj = cadModelBase.extend({\n  objUrl: z.string(),\n  mtlUrl: z.string().optional(),\n})\n\nexport interface CadModelJscad extends CadModelBase {\n  jscad: Record<string, any>\n}\nexport const cadModelJscad = cadModelBase.extend({\n  jscad: z.record(z.any()),\n})\n\nexport type CadModelProp = string | CadModelStl | CadModelObj | CadModelJscad\n\nexport const cadModelProp = z.union([\n  z.string(),\n  cadModelStl,\n  cadModelObj,\n  cadModelJscad,\n])\n\ntype InferredCadModelProp = z.input<typeof cadModelProp>\nexpectTypesMatch<CadModelProp, InferredCadModelProp>(true)\n","import type { LayerRef } from \"@tscircuit/soup\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\n\n/**\n * This is an abbreviated definition of the soup elements that you can find here:\n * https://docs.tscircuit.com/api-reference/advanced/soup#pcb-smtpad\n */\nexport type FootprintSoupElements = {\n  type: \"pcb_smtpad\" | \"pcb_plated_hole\"\n  x: string | number\n  y: string | number\n  layer?: LayerRef\n  holeDiameter?: string | number\n  outerDiameter?: string | number\n  shape?: \"circle\" | \"rect\"\n  width?: string | number\n  height?: string | number\n  portHints?: string[]\n}\n\nexport type Footprint = string | ReactElement | FootprintSoupElements[]\nexport const footprintProp = z.custom<Footprint>((v) => true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\n/**\n * @deprecated Use SchematicPortArrangementWithPinCounts instead.\n */\nexport interface SchematicPortArrangementWithSizes {\n  leftSize?: number\n  topSize?: number\n  rightSize?: number\n  bottomSize?: number\n}\n\n/**\n * Specifies the number of pins on each side of the schematic box component.\n */\nexport interface SchematicPortArrangementWithPinCounts {\n  leftPinCount?: number\n  topPinCount?: number\n  rightPinCount?: number\n  bottomPinCount?: number\n}\n\nexport interface PinSideDefinition {\n  pins: number[]\n  direction:\n    | \"top-to-bottom\"\n    | \"left-to-right\"\n    | \"bottom-to-top\"\n    | \"right-to-left\"\n}\n\nexport interface SchematicPortArrangementWithSides {\n  leftSide?: PinSideDefinition\n  topSide?: PinSideDefinition\n  rightSide?: PinSideDefinition\n  bottomSide?: PinSideDefinition\n}\n\nexport interface SchematicPortArrangement\n  extends SchematicPortArrangementWithSizes,\n    SchematicPortArrangementWithSides,\n    SchematicPortArrangementWithPinCounts {}\n\nexport const explicitPinSideDefinition = z.object({\n  pins: z.array(z.number()),\n  direction: z.union([\n    z.literal(\"top-to-bottom\"),\n    z.literal(\"left-to-right\"),\n    z.literal(\"bottom-to-top\"),\n    z.literal(\"right-to-left\"),\n  ]),\n})\n\nexport const schematicPortArrangement = z.object({\n  leftSize: z.number().optional().describe(\"@deprecated, use leftPinCount\"),\n  topSize: z.number().optional().describe(\"@deprecated, use topPinCount\"),\n  rightSize: z.number().optional().describe(\"@deprecated, use rightPinCount\"),\n  bottomSize: z.number().optional().describe(\"@deprecated, use bottomPinCount\"),\n  leftPinCount: z.number().optional(),\n  rightPinCount: z.number().optional(),\n  topPinCount: z.number().optional(),\n  bottomPinCount: z.number().optional(),\n  leftSide: explicitPinSideDefinition.optional(),\n  rightSide: explicitPinSideDefinition.optional(),\n  topSide: explicitPinSideDefinition.optional(),\n  bottomSide: explicitPinSideDefinition.optional(),\n})\n\nexpectTypesMatch<\n  SchematicPortArrangement,\n  z.input<typeof schematicPortArrangement>\n>(true)\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type SchematicPinStyle = Record<\n  string,\n  {\n    leftMargin?: number | string\n    rightMargin?: number | string\n    topMargin?: number | string\n    bottomMargin?: number | string\n  }\n>\n\nexport const schematicPinStyle = z.record(\n  z.object({\n    leftMargin: distance.optional(),\n    rightMargin: distance.optional(),\n    topMargin: distance.optional(),\n    bottomMargin: distance.optional(),\n  }),\n)\n\nexpectTypesMatch<SchematicPinStyle, z.input<typeof schematicPinStyle>>(true)\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { point, type Point } from \"lib/common/point\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport type { SubcircuitGroupProps } from \"./group\"\nimport type { Distance } from \"lib/common/distance\"\n\nexport interface BoardProps {\n  width?: number | string\n  height?: number | string\n  outline?: Point[]\n  pcbX?: number | string\n  pcbY?: number | string\n  layout?: any\n  routingDisabled?: boolean\n  children?: any\n  defaultTraceWidth?: Distance\n}\n\nexport const boardProps = z.object({\n  width: distance.optional(),\n  height: distance.optional(),\n  outline: z.array(point).optional(),\n  pcbX: distance.optional().default(0),\n  pcbY: distance.optional().default(0),\n  layout: z.any().optional(),\n  routingDisabled: z.boolean().optional(),\n  children: z.any(),\n  defaultTraceWidth: distance.optional(),\n})\n\nexpectTypesMatch<BoardProps, z.input<typeof boardProps>>(true)\n","import { distance } from \"@tscircuit/soup\"\nimport { z } from \"zod\"\n\nexport const point = z.object({\n  x: distance,\n  y: distance,\n})\n\nexport type Point = { x: number | string; y: number | string }\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  schematicPortArrangement,\n  type SchematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  schematicPinStyle,\n  type SchematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport type { Distance } from \"lib/common/distance\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface ChipProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string>\n  schPortArrangement?: SchematicPortArrangement\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: Distance\n  schWidth?: Distance\n  schHeight?: Distance\n}\n\nexport const chipProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z.record(z.number().or(z.string()), z.string()).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n})\n\n/**\n * @deprecated Use ChipProps instead.\n */\nexport const bugProps = chipProps\nexport type InferredChipProps = z.input<typeof chipProps>\n\nexpectTypesMatch<InferredChipProps, ChipProps>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  schematicPinStyle,\n  type SchematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { distance } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport {\n  schematicPortArrangement,\n  type SchematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\n\nexport interface JumperProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string>\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: number | string\n  schWidth?: number | string\n  schHeight?: number | string\n  schDirection?: \"left\" | \"right\"\n  schPortArrangement?: SchematicPortArrangement\n}\n\nexport const jumperProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z.record(z.number().or(z.string()), z.string()).optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  schDirection: z.enum([\"left\", \"right\"]).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n})\n\ntype InferredJumperProps = z.input<typeof jumperProps>\nexpectTypesMatch<JumperProps, InferredJumperProps>(true)\n","import { z } from \"zod\"\nimport { resistance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  lrPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface ResistorProps extends CommonComponentProps {\n  resistance: number | string\n  pullupFor?: string\n  pullupTo?: string\n  pulldownFor?: string\n  pulldownTo?: string\n}\n\nexport const resistorProps = commonComponentProps.extend({\n  resistance,\n\n  pullupFor: z.string().optional(),\n  pullupTo: z.string().optional(),\n\n  pulldownFor: z.string().optional(),\n  pulldownTo: z.string().optional(),\n})\nexport const resistorPins = lrPins\n\ntype InferredResistorProps = z.input<typeof resistorProps>\nexpectTypesMatch<ResistorProps, InferredResistorProps>(true)\n","import { z } from \"zod\"\nimport { capacitance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface CapacitorProps extends CommonComponentProps {\n  capacitance: number | string\n\n  decouplingFor?: string\n  decouplingTo?: string\n\n  bypassFor?: string\n  bypassTo?: string\n}\n\nexport const capacitorProps = commonComponentProps.extend({\n  capacitance,\n\n  decouplingFor: z.string().optional(),\n  decouplingTo: z.string().optional(),\n\n  bypassFor: z.string().optional(),\n  bypassTo: z.string().optional(),\n})\nexport const capacitorPins = lrPolarPins\n\nexpectTypesMatch<CapacitorProps, z.input<typeof capacitorProps>>(true)\n","import { z } from \"zod\"\nimport { commonLayoutProps, type CommonLayoutProps } from \"lib/common/layout\"\nimport { length } from \"@tscircuit/soup\"\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\n\nexport interface BaseGroupProps extends CommonLayoutProps {\n  name?: string\n  children?: any\n}\n\nexport interface SubcircuitGroupProps extends BaseGroupProps {\n  subcircuit: true\n  layout?: LayoutBuilder\n  routingDisabled?: boolean\n  defaultTraceWidth?: Distance\n}\n\nexport type GroupProps = SubcircuitGroupProps | BaseGroupProps\n\nexport const baseGroupProps = commonLayoutProps.extend({\n  name: z.string().optional(),\n  children: z.any().optional(),\n})\n\nexport const subcircuitGroupProps = baseGroupProps.extend({\n  subcircuit: z.literal(true),\n  layout: z.custom<LayoutBuilder>((v) => true).optional(),\n  routingDisabled: z.boolean().optional(),\n  defaultTraceWidth: length.optional(),\n})\n\nexport const groupProps = z.union([baseGroupProps, subcircuitGroupProps])\n\ntype InferredBaseGroupProps = z.input<typeof baseGroupProps>\ntype InferredSubcircuitGroupProps = z.input<typeof subcircuitGroupProps>\n\nexpectTypesMatch<BaseGroupProps, InferredBaseGroupProps>(true)\nexpectTypesMatch<SubcircuitGroupProps, InferredSubcircuitGroupProps>(true)\n\ntype InferredGroupProps = z.input<typeof groupProps>\nexpectTypesMatch<GroupProps, InferredGroupProps>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface NetProps {\n  name: string\n}\n\nexport const netProps = z.object({\n  name: z.string(),\n})\n\ntype InferredNetProps = z.input<typeof netProps>\nexpectTypesMatch<NetProps, InferredNetProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ConstrainedLayoutProps {\n  name?: string\n  pcbOnly?: boolean\n  schOnly?: boolean\n}\n\nexport const constrainedLayoutProps = z.object({\n  name: z.string().optional(),\n  pcbOnly: z.boolean().optional(),\n  schOnly: z.boolean().optional(),\n})\n\nexport type InferredConstrainedLayoutProps = z.input<\n  typeof constrainedLayoutProps\n>\n\nexpectTypesMatch<InferredConstrainedLayoutProps, ConstrainedLayoutProps>(true)\n","import { z } from \"zod\"\n\nexport type Distance = number | string\n\nexport { distance, length } from \"@tscircuit/soup\"\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\nimport { distance } from \"lib/common/distance\"\nimport { z } from \"zod\"\n\nexport type PcbXDistConstraint = {\n  pcb?: true\n  xDist: Distance\n\n  /**\n   * Selector for left component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  left: string\n\n  /**\n   * Selector for right component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  right: string\n\n  /**\n   * If true, the provided distance is the distance between the closest edges of\n   * the left and right components\n   */\n  edgeToEdge?: true\n\n  /**\n   * If true, the provided distance is the distance between the centers of the\n   * left and right components\n   */\n  centerToCenter?: true\n}\n\nexport type PcbYDistConstraint = {\n  pcb?: true\n  yDist: Distance\n\n  /**\n   * Selector for top component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 topedge\", \".R1 center\"\n   */\n  top: string\n\n  /**\n   * Selector for bottom component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 bottomedge\", \".R1 center\"\n   */\n  bottom: string\n\n  edgeToEdge?: true\n  centerToCenter?: true\n}\n\nexport type PcbSameYConstraint = {\n  pcb?: true\n  sameY?: true\n\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type PcbSameXConstraint = {\n  pcb?: true\n  sameX?: true\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type ConstraintProps =\n  | PcbXDistConstraint\n  | PcbYDistConstraint\n  | PcbSameYConstraint\n  | PcbSameXConstraint\n\n// -----------------------------------------------------------------------------\n// Zod\n// -----------------------------------------------------------------------------\n\nexport const pcbXDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  xDist: distance,\n  left: z.string(),\n  right: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbXDistConstraint, z.input<typeof pcbXDistConstraintProps>>(\n  true,\n)\n\nexport const pcbYDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  yDist: distance,\n  top: z.string(),\n  bottom: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbYDistConstraint, z.input<typeof pcbYDistConstraintProps>>(\n  true,\n)\n\nexport const pcbSameYConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameY: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameYConstraint, z.input<typeof pcbSameYConstraintProps>>(\n  true,\n)\n\nexport const pcbSameXConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameX: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameXConstraint, z.input<typeof pcbSameXConstraintProps>>(\n  true,\n)\n\nexport const constraintProps = z.union([\n  pcbXDistConstraintProps,\n  pcbYDistConstraintProps,\n  pcbSameYConstraintProps,\n  pcbSameXConstraintProps,\n])\n\nexpectTypesMatch<ConstraintProps, z.input<typeof constraintProps>>(true)\n","import {\n  pcbLayoutProps,\n  type CommonLayoutProps,\n  type PcbLayoutProps,\n} from \"lib/common/layout\"\nimport { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { portHints, type PortHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n  portHints?: PortHints\n}\n\nexport interface CircleSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport type SmtPadProps = RectSmtPadProps | CircleSmtPadProps\n\n// ----------------------------------------------------------------------------\n// Zod\n// ----------------------------------------------------------------------------\n\nexport const rectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredRectSmtPadProps = z.input<typeof rectSmtPadProps>\nexpectTypesMatch<InferredRectSmtPadProps, RectSmtPadProps>(true)\n\nexport const circleSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredCircleSmtPadProps = z.input<typeof circleSmtPadProps>\nexpectTypesMatch<InferredCircleSmtPadProps, CircleSmtPadProps>(true)\n\nexport const smtPadProps = z.union([circleSmtPadProps, rectSmtPadProps])\n\nexport type InferredSmtPadProps = z.input<typeof smtPadProps>\nexpectTypesMatch<InferredSmtPadProps, SmtPadProps>(true)\n","import { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { boolean, string, z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n}\n\nexport interface CircleSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n}\n\nexport type SolderPasteProps = RectSolderPasteProps | CircleSolderPasteProps\n\n// zod\n\nexport const rectSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  })\ntype InferredRectSolderPasteProps = z.input<typeof rectSolderPasteProps>\nexpectTypesMatch<InferredRectSolderPasteProps, RectSolderPasteProps>(true)\n\nexport const circleSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  })\ntype InferredCircleSolderPasteProps = z.input<typeof circleSolderPasteProps>\nexpectTypesMatch<InferredCircleSolderPasteProps, CircleSolderPasteProps>(true)\n\nexport const solderPasteProps = z.union([\n  circleSolderPasteProps,\n  rectSolderPasteProps,\n])\n\nexport type InferredSolderPasteProps = z.input<typeof solderPasteProps>\nexpectTypesMatch<InferredSolderPasteProps, SolderPasteProps>(true)\n","import { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface HoleProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  name?: string\n  diameter?: Distance\n  radius?: Distance\n}\n\nexport const holeProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    name: z.string().optional(),\n    diameter: distance.optional(),\n    radius: distance.optional(),\n  })\n  .transform((d) => ({\n    ...d,\n    diameter: d.diameter ?? 2 * d.radius!,\n    radius: d.radius ?? d.diameter! / 2,\n  }))\n\nexport type InferredHoleProps = z.input<typeof holeProps>\n\nexpectTypesMatch<HoleProps, InferredHoleProps>(true)\n","import { z } from \"zod\"\nimport { distance, route_hint_point } from \"@tscircuit/soup\"\nimport { point } from \"../common/point\"\n\nexport const portRef = z.union([\n  z.string(),\n  z.custom<{ getPortSelector: () => string }>((v) =>\n    Boolean(v.getPortSelector),\n  ),\n])\n\nconst baseTraceProps = z.object({\n  key: z.string().optional(),\n  thickness: distance.optional(),\n  schematicRouteHints: z.array(point).optional(),\n  pcbRouteHints: z.array(route_hint_point).optional(),\n})\n\nexport const traceProps = z.union([\n  baseTraceProps.extend({\n    path: z.array(portRef),\n  }),\n  baseTraceProps.extend({\n    from: portRef,\n    to: portRef,\n  }),\n])\n\nexport type TraceProps = z.input<typeof traceProps>\n","import { layer_ref, type LayerRef } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface FootprintProps {\n  /**\n   * The layer that the footprint is designed for. If you set this to \"top\"\n   * then it means the children were intended to represent the top layer. If\n   * the <chip /> with this footprint is moved to the bottom layer, then the\n   * components will be mirrored.\n   *\n   * Generally, you shouldn't set this except where it can help prevent\n   * confusion because you have a complex multi-layer footprint. Default is\n   * \"top\" and this is most intuitive.\n   */\n  originalLayer?: LayerRef\n}\n\nexport const footprintProps = z.object({\n  originalLayer: layer_ref.default(\"top\").optional(),\n})\n\nexport type FootprintPropsInput = z.input<typeof footprintProps>\ntype InferredFootprintProps = z.infer<typeof footprintProps>\nexpectTypesMatch<InferredFootprintProps, FootprintProps>(true)\n"],"mappings":";;;;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,8BAAAA;AAAA,EAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AASA,IAAAC,gBAeO;AAEP,IAAAC,eAAkB;;;ACxBX,IAAM,mBAAmB,CAC9B,aACS;AAAC;;;ACHZ,iBAAkB;AACX,IAAM,YAAY,aAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC;AASxD,IAAM,qBAAqB,aAAE,KAAK;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAuD,IAAI;AAC3D,iBAAyE,IAAI;;;ACnB7E,IAAAC,cAAkB;AAGX,IAAM,YAAY,cAAE,MAAM,cAAE,OAAO,EAAE,GAAG,cAAE,OAAO,CAAC,CAAC;AAG1D,iBAAuD,IAAI;;;ACN3D,IAAAC,cAAkB;AAClB,IAAAC,eAQO;;;ACTP,kBAAyB;AACzB,IAAAC,cAAkB;AAEX,IAAM,SAAS,cAAE,OAAO;AAAA,EAC7B,GAAG;AAAA,EACH,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ACPD,IAAAC,cAAkB;AAIX,IAAM,iBAAiB,cAAE,OAAO;AAAA,EACrC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AACrC,CAAC;AAcM,IAAM,eAAe,cAAE,OAAO;AAAA,EACnC,gBAAgB,cAAE,OAAO,EAAE,GAAG,cAAc,EAAE,SAAS;AAAA,EACvD,gBAAgB,OAAO,SAAS;AAAA,EAChC,MAAM,OAAO,SAAS;AACxB,CAAC;AAED,iBAA6D,IAAI;AAK1D,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQ,cAAE,OAAO;AACnB,CAAC;AAMM,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQ,cAAE,OAAO;AAAA,EACjB,QAAQ,cAAE,OAAO,EAAE,SAAS;AAC9B,CAAC;AAKM,IAAM,gBAAgB,aAAa,OAAO;AAAA,EAC/C,OAAO,cAAE,OAAO,cAAE,IAAI,CAAC;AACzB,CAAC;AAIM,IAAM,eAAe,cAAE,MAAM;AAAA,EAClC,cAAE,OAAO;AAAA,EACT;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAqD,IAAI;;;AC7DzD,IAAAC,cAAkB;AAoBX,IAAM,gBAAgB,cAAE,OAAkB,CAAC,MAAM,IAAI;;;AHsBrD,IAAM,iBAAiB,cAAE,OAAO;AAAA,EACrC,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,OAAO,uBAAU,SAAS;AAC5B,CAAC;AAED,iBAAyD,IAAI;AAEtD,IAAM,oBAAoB,cAAE,OAAO;AAAA,EACxC,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,OAAO,uBAAU,SAAS;AAAA,EAC1B,WAAW,cAAc,SAAS;AACpC,CAAC;AAGD,iBAA+D,IAAI;AAY5D,IAAM,gBAAgB,cAAE,OAAO;AAAA,EACpC,qBAAqB,cAAE,OAAO,4BAAe,cAAE,MAAM,cAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAC7E,CAAC;AAED,iBAA+D,IAAI;AAW5D,IAAM,uBAAuB,kBACjC,MAAM,aAAa,EACnB,OAAO;AAAA,EACN,KAAK,cAAE,IAAI,EAAE,SAAS;AAAA,EACtB,MAAM,cAAE,OAAO;AAAA,EACf,UAAU,aAAa,SAAS;AAAA,EAChC,UAAU,cAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,YAAY,cAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAGH,iBAAqE,IAAI;AAElE,IAAM,SAAS,CAAC,QAAQ,QAAQ,QAAQ,OAAO;AAC/C,IAAM,cAAc;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAEO,IAAM,uBAAuB,sBAAS,GAAG,cAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;;;AIpH1E,IAAAC,cAAkB;AA2CX,IAAM,4BAA4B,cAAE,OAAO;AAAA,EAChD,MAAM,cAAE,MAAM,cAAE,OAAO,CAAC;AAAA,EACxB,WAAW,cAAE,MAAM;AAAA,IACjB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,EAC3B,CAAC;AACH,CAAC;AAEM,IAAM,2BAA2B,cAAE,OAAO;AAAA,EAC/C,UAAU,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,+BAA+B;AAAA,EACxE,SAAS,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,8BAA8B;AAAA,EACtE,WAAW,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,gCAAgC;AAAA,EAC1E,YAAY,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,iCAAiC;AAAA,EAC5E,cAAc,cAAE,OAAO,EAAE,SAAS;AAAA,EAClC,eAAe,cAAE,OAAO,EAAE,SAAS;AAAA,EACnC,aAAa,cAAE,OAAO,EAAE,SAAS;AAAA,EACjC,gBAAgB,cAAE,OAAO,EAAE,SAAS;AAAA,EACpC,UAAU,0BAA0B,SAAS;AAAA,EAC7C,WAAW,0BAA0B,SAAS;AAAA,EAC9C,SAAS,0BAA0B,SAAS;AAAA,EAC5C,YAAY,0BAA0B,SAAS;AACjD,CAAC;AAED,iBAGE,IAAI;;;ACxEN,IAAAC,cAAkB;AAClB,IAAAC,eAAyB;AAalB,IAAM,oBAAoB,cAAE;AAAA,EACjC,cAAE,OAAO;AAAA,IACP,YAAY,sBAAS,SAAS;AAAA,IAC9B,aAAa,sBAAS,SAAS;AAAA,IAC/B,WAAW,sBAAS,SAAS;AAAA,IAC7B,cAAc,sBAAS,SAAS;AAAA,EAClC,CAAC;AACH;AAEA,iBAAuE,IAAI;;;ACvB3E,IAAAC,eAAkB;AAClB,IAAAC,eAAyB;;;ACDzB,IAAAC,eAAyB;AACzB,IAAAC,cAAkB;AAEX,IAAM,QAAQ,cAAE,OAAO;AAAA,EAC5B,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ADaM,IAAM,aAAa,eAAE,OAAO;AAAA,EACjC,OAAO,sBAAS,SAAS;AAAA,EACzB,QAAQ,sBAAS,SAAS;AAAA,EAC1B,SAAS,eAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EACjC,MAAM,sBAAS,SAAS,EAAE,QAAQ,CAAC;AAAA,EACnC,MAAM,sBAAS,SAAS,EAAE,QAAQ,CAAC;AAAA,EACnC,QAAQ,eAAE,IAAI,EAAE,SAAS;AAAA,EACzB,iBAAiB,eAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,UAAU,eAAE,IAAI;AAAA,EAChB,mBAAmB,sBAAS,SAAS;AACvC,CAAC;AAED,iBAAyD,IAAI;;;AE/B7D,IAAAC,eAAkB;AAClB,IAAAC,eAAyB;AA0BlB,IAAM,YAAY,qBAAqB,OAAO;AAAA,EACnD,wBAAwB,eAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,eAAE,OAAO,eAAE,OAAO,EAAE,GAAG,eAAE,OAAO,CAAC,GAAG,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACpE,oBAAoB,yBAAyB,SAAS;AAAA,EACtD,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAe,sBAAS,SAAS;AAAA,EACjC,UAAU,sBAAS,SAAS;AAAA,EAC5B,WAAW,sBAAS,SAAS;AAC/B,CAAC;AAKM,IAAM,WAAW;AAGxB,iBAA+C,IAAI;;;AC3CnD,IAAAC,eAAkB;AASlB,IAAAC,eAAyB;AAkBlB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,wBAAwB,eAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,eAAE,OAAO,eAAE,OAAO,EAAE,GAAG,eAAE,OAAO,CAAC,GAAG,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACpE,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAe,sBAAS,SAAS;AAAA,EACjC,UAAU,sBAAS,SAAS;AAAA,EAC5B,WAAW,sBAAS,SAAS;AAAA,EAC7B,cAAc,eAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACjD,oBAAoB,yBAAyB,SAAS;AACxD,CAAC;AAGD,iBAAmD,IAAI;;;ACvCvD,IAAAC,eAAkB;AAClB,IAAAC,eAA2B;AAgBpB,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AAAA,EAEA,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAU,eAAE,OAAO,EAAE,SAAS;AAAA,EAE9B,aAAa,eAAE,OAAO,EAAE,SAAS;AAAA,EACjC,YAAY,eAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AACM,IAAM,eAAe;AAG5B,iBAAuD,IAAI;;;AC7B3D,IAAAC,eAAkB;AAClB,IAAAC,eAA4B;AAmBrB,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD;AAAA,EAEA,eAAe,eAAE,OAAO,EAAE,SAAS;AAAA,EACnC,cAAc,eAAE,OAAO,EAAE,SAAS;AAAA,EAElC,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAU,eAAE,OAAO,EAAE,SAAS;AAChC,CAAC;AACM,IAAM,gBAAgB;AAE7B,iBAAiE,IAAI;;;AC/BrE,IAAAC,eAAkB;AAElB,IAAAC,gBAAuB;AAmBhB,IAAM,iBAAiB,kBAAkB,OAAO;AAAA,EACrD,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAU,eAAE,IAAI,EAAE,SAAS;AAC7B,CAAC;AAEM,IAAM,uBAAuB,eAAe,OAAO;AAAA,EACxD,YAAY,eAAE,QAAQ,IAAI;AAAA,EAC1B,QAAQ,eAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACtD,iBAAiB,eAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,mBAAmB,qBAAO,SAAS;AACrC,CAAC;AAEM,IAAM,aAAa,eAAE,MAAM,CAAC,gBAAgB,oBAAoB,CAAC;AAKxE,iBAAyD,IAAI;AAC7D,iBAAqE,IAAI;AAGzE,iBAAiD,IAAI;;;AC1CrD,IAAAC,eAAkB;AAOX,IAAM,WAAW,eAAE,OAAO;AAAA,EAC/B,MAAM,eAAE,OAAO;AACjB,CAAC;AAGD,iBAA6C,IAAI;;;ACXjD,IAAAC,eAAkB;AAQX,IAAM,yBAAyB,eAAE,OAAO;AAAA,EAC7C,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,SAAS,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC9B,SAAS,eAAE,QAAQ,EAAE,SAAS;AAChC,CAAC;AAMD,iBAAyE,IAAI;;;ACnB7E,IAAAC,eAAkB;AAIlB,IAAAC,gBAAiC;;;ACDjC,IAAAC,eAAkB;AAkFX,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO;AAAA,EACP,MAAM,eAAE,OAAO;AAAA,EACf,OAAO,eAAE,OAAO;AAAA,EAEhB,YAAY,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgB,eAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO;AAAA,EACP,KAAK,eAAE,OAAO;AAAA,EACd,QAAQ,eAAE,OAAO;AAAA,EAEjB,YAAY,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgB,eAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAK,eAAE,MAAM,eAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAK,eAAE,MAAM,eAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAmE,IAAI;;;ACnIvE,IAAAC,eAAkB;AAwBX,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,MAAM;AAAA,EACvB,OAAO;AAAA,EACP,QAAQ;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,oBAAoB,eAC9B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQ;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA+D,IAAI;AAE5D,IAAM,cAAc,eAAE,MAAM,CAAC,mBAAmB,eAAe,CAAC;AAGvE,iBAAmD,IAAI;;;ACnDvD,IAAAC,eAAmC;AAoB5B,IAAM,uBAAuB,eACjC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,MAAM;AAAA,EACvB,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAEH,iBAAqE,IAAI;AAElE,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQ;AACV,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,mBAAmB,eAAE,MAAM;AAAA,EACtC;AAAA,EACA;AACF,CAAC;AAGD,iBAA6D,IAAI;;;AC/CjE,IAAAC,eAAkB;AAWX,IAAM,YAAY,eACtB,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAU,uBAAS,SAAS;AAAA,EAC5B,QAAQ,uBAAS,SAAS;AAC5B,CAAC,EACA,UAAU,CAAC,OAAO;AAAA,EACjB,GAAG;AAAA,EACH,UAAU,EAAE,YAAY,IAAI,EAAE;AAAA,EAC9B,QAAQ,EAAE,UAAU,EAAE,WAAY;AACpC,EAAE;AAIJ,iBAA+C,IAAI;;;AC1BnD,IAAAC,eAAkB;AAClB,IAAAC,gBAA2C;AAGpC,IAAM,UAAU,eAAE,MAAM;AAAA,EAC7B,eAAE,OAAO;AAAA,EACT,eAAE;AAAA,IAA0C,CAAC,MAC3C,QAAQ,EAAE,eAAe;AAAA,EAC3B;AACF,CAAC;AAED,IAAM,iBAAiB,eAAE,OAAO;AAAA,EAC9B,KAAK,eAAE,OAAO,EAAE,SAAS;AAAA,EACzB,WAAW,uBAAS,SAAS;AAAA,EAC7B,qBAAqB,eAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EAC7C,eAAe,eAAE,MAAM,8BAAgB,EAAE,SAAS;AACpD,CAAC;AAEM,IAAM,aAAa,eAAE,MAAM;AAAA,EAChC,eAAe,OAAO;AAAA,IACpB,MAAM,eAAE,MAAM,OAAO;AAAA,EACvB,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,MAAM;AAAA,IACN,IAAI;AAAA,EACN,CAAC;AACH,CAAC;;;AC1BD,IAAAC,gBAAyC;AAEzC,IAAAC,eAAkB;AAgBX,IAAM,iBAAiB,eAAE,OAAO;AAAA,EACrC,eAAe,wBAAU,QAAQ,KAAK,EAAE,SAAS;AACnD,CAAC;AAID,iBAAyD,IAAI;;;AzBwCtD,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AACF,CAAC;AACM,IAAM,eAAe;AAGrB,IAAM,aAAa,qBAAqB,OAAO,CAAC,CAAC;AACjD,IAAM,YAAY;AAGlB,IAAM,WAAW,qBAAqB,OAAO;AAAA,EAClD,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AACM,IAAM,UAAU;AAGhB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,YAAY,eAAE,KAAK,CAAC,MAAM,CAAC,EAAE,QAAQ,MAAM;AAAA,EAC3C,kBAAkB,eAAE,QAAQ,EAAE,QAAQ,KAAK;AAC7C,CAAC;AAGM,IAAMC,wBAAuB,uBAAS,GAAG,eAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;AAEnE,IAAM,WAAW,kBAAkB,OAAO;AAAA,EAC/C,WAAW;AAAA,EACX,SAAS;AAAA,EACT,cAAc;AAAA,EACd,eAAe;AACjB,CAAC;AAGM,IAAM,gBAAgB,kBAAkB,OAAO;AAAA,EACpD,KAAK,eAAE,OAAO,EAAE,SAAS;AAC3B,CAAC;AAGM,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAO,eAAE,QAAQ,QAAQ;AAAA,IACzB,cAAc;AAAA,IACd,eAAe;AAAA,IACf,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAO,eAAE,QAAQ,MAAM;AAAA,IACvB,YAAY;AAAA,IACZ,aAAa;AAAA,IACb,YAAY;AAAA,IACZ,aAAa;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AACH,CAAC;AAGM,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAO,eAAE,QAAQ,QAAQ;AAAA,IACzB,QAAQ;AAAA,EACV,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,OAAO,eAAE,QAAQ,MAAM;AAAA,IACvB,OAAO;AAAA,IACP,QAAQ;AAAA,EACV,CAAC;AACH,CAAC;AAGM,IAAM,oBAAoB,eAAE,OAAO;AAAA,EACxC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,MAAM,eAAE,OAAO;AACjB,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AACN,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,QAAQ,eAAE,MAAM,mBAAK;AAAA,EACrB,UAAU,eAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC9C,WAAW,eAAE,KAAK,CAAC,OAAO,MAAM,CAAC,EAAE,SAAS;AAC9C,CAAC;AAGM,IAAM,iBAAiB;AAGvB,IAAM,mBAAmB,qBAAqB,OAAO;AAAA,EAC1D;AACF,CAAC;AAGM,IAAM,YAAY,kBAAkB,OAAO;AAAA,EAChD,MAAM,eAAE,OAAO;AAAA,EACf,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,SAAS,eAAE,MAAM,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC;AACF,CAAC;AAGM,IAAM,sBAAsB,eAAe,OAAO;AAAA,EACvD,MAAM,eAAE,OAAO;AAAA,EACf,iBAAiB,eACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAM,eAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAU,qBAAO,SAAS;AAC5B,CAAC;AAGM,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAO,eAAE,MAAM,8BAAgB;AAAA,EAC/B,aAAa,qBAAO,SAAS;AAC/B,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,aAAa;AAAA,EACb,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AACN,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAU,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAW,eAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAa,uBAAS,SAAS;AAAA,EAC/B,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAGI,IAAM,wBAAwB,eAClC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAU,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAW,eAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAa,uBAAS,SAAS;AAAA,EAC/B,QAAQ;AACV,CAAC;AAGI,IAAM,sBAAsB,eAAE,OAAO;AAAA,EAC1C,GAAG;AAAA,EACH,GAAG;AAAA,EACH,KAAK,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC1B,SAAS,wBAAU,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiB,eAAE,OAAO;AAAA,EACrC,KAAK,eACF,OAAO,EACP,SAAS,EACT;AAAA,IACC;AAAA,EACF;AAAA,EACF,OAAO,eAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,QAAQ,+BAAiB,GAAG,mBAAmB,EAAE,SAAS;AAAA,EAC1D,SAAS,eACN,MAAM,8BAAgB,EACtB,GAAG,eAAE,MAAM,mBAAmB,CAAC,EAC/B,SAAS;AAAA,EACZ,YAAY,eAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAIM,IAAM,gBAAgB,eAAE,OAAO;AAAA,EACpC,OAAO,eAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,WAAW,uBAAS,SAAS;AAAA,EAC7B,OAAO,eAAE,MAAM,8BAAgB;AACjC,CAAC;AAGM,IAAM,2BAA2B,eAAe,OAAO;AAAA,EAC5D,MAAM,eAAE,OAAO;AAAA,EACf,iBAAiB,eACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAM,eAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAU,qBAAO,SAAS;AAAA,EAC1B,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AAGM,IAAM,2BAA2B,eACrC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAO,eAAE,MAAM,8BAAgB;AAAA,EAC/B,aAAa,qBAAO,SAAS;AAAA,EAC7B,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;","names":["distanceOrMultiplier","import_soup","import_zod","import_zod","import_zod","import_soup","import_zod","import_zod","import_zod","import_zod","import_zod","import_soup","import_zod","import_soup","import_soup","import_zod","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_zod","import_zod","import_soup","import_zod","import_zod","import_zod","import_zod","import_zod","import_soup","import_soup","import_zod","distanceOrMultiplier"]}
+{"version":3,"sources":["../lib/index.ts","../lib/typecheck.ts","../lib/common/direction.ts","../lib/common/portHints.ts","../lib/common/layout.ts","../lib/common/point3.ts","../lib/common/cadModel.ts","../lib/common/footprintProp.ts","../lib/common/schematicPinDefinitions.ts","../lib/common/schematicPinStyle.ts","../lib/components/board.ts","../lib/common/point.ts","../lib/components/chip.ts","../lib/components/jumper.ts","../lib/components/resistor.ts","../lib/components/capacitor.ts","../lib/components/group.ts","../lib/components/net.ts","../lib/components/constrainedlayout.ts","../lib/common/distance.ts","../lib/components/constraint.ts","../lib/components/smtpad.ts","../lib/components/solderpaste.ts","../lib/components/hole.ts","../lib/components/trace.ts","../lib/components/footprint.ts"],"sourcesContent":["/**\n * THINKING ABOUT ADDING SOMETHING TO THIS FILE?\n *\n * THINK AGAIN!\n *\n * This file is TOO BIG! Create files using the pattern in the surrounding\n * directories, then export from this file.\n */\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport {\n  type AnySoupElementInput,\n  capacitance,\n  distance,\n  inductance,\n  layer_ref,\n  length,\n  type PCBPlatedHoleInput,\n  type PCBSMTPadInput,\n  point,\n  resistance,\n  rotation,\n  route_hint_point,\n  supplier_name,\n  voltage,\n} from \"@tscircuit/soup\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\nimport { direction } from \"./common/direction\"\nimport { portHints } from \"./common/portHints\"\nimport {\n  commonComponentProps,\n  commonLayoutProps,\n  lrPins,\n  lrPolarPins,\n  pcbLayoutProps,\n} from \"./common/layout\"\nimport { explicitPinSideDefinition } from \"./common/schematicPinDefinitions\"\n\nexport * from \"./common/direction\"\nexport * from \"./common/portHints\"\nexport * from \"./common/layout\"\nexport * from \"./common/point3\"\nexport * from \"./common/portHints\"\nexport * from \"./common/footprintProp\"\nexport * from \"./common/schematicPinDefinitions\"\nexport * from \"./common/schematicPinStyle\"\nexport * from \"./common/cadModel\"\n\nexport * from \"./components/board\"\nexport * from \"./components/chip\"\nexport * from \"./components/jumper\"\n\nexport * from \"./components/resistor\"\nexport * from \"./components/capacitor\"\nexport * from \"./components/group\"\nexport * from \"./components/net\"\nexport * from \"./components/constrainedlayout\"\nexport * from \"./components/constraint\"\nexport * from \"./components/smtpad\"\nexport * from \"./components/solderpaste\"\nexport * from \"./components/hole\"\nexport * from \"./components/trace\"\nexport * from \"./components/footprint\"\n\nexport const inductorProps = commonComponentProps.extend({\n  inductance,\n})\nexport const inductorPins = lrPins\nexport type InductorProps = z.input<typeof inductorProps>\n\nexport const diodeProps = commonComponentProps.extend({})\nexport const diodePins = lrPolarPins\nexport type DiodeProps = z.input<typeof diodeProps>\n\nexport const ledProps = commonComponentProps.extend({\n  color: z.string().optional(),\n})\nexport const ledPins = lrPolarPins\nexport type LedProps = z.input<typeof ledProps>\n\nexport const switchProps = commonComponentProps.extend({\n  ftype: z.literal(\"switch\"),\n  switchType: z.enum([\"spst\"]).default(\"spst\"),\n  isNormallyClosed: z.boolean().default(false),\n})\nexport type SwitchProps = z.input<typeof switchProps>\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n\nexport const viaProps = commonLayoutProps.extend({\n  fromLayer: layer_ref,\n  toLayer: layer_ref,\n  holeDiameter: distance,\n  outerDiameter: distance,\n})\nexport type ViaProps = z.input<typeof viaProps>\n\nexport const netAliasProps = commonLayoutProps.extend({\n  net: z.string().optional(),\n})\nexport type NetAliasProps = z.input<typeof netAliasProps>\n\nexport const platedHoleProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"circle\"),\n    holeDiameter: distance,\n    outerDiameter: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    name: z.string().optional(),\n    shape: z.literal(\"oval\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n])\nexport type PlatedHoleProps = z.input<typeof platedHoleProps>\n\nexport const pcbKeepoutProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  }),\n  pcbLayoutProps.extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  }),\n])\nexport type PcbKeepoutProps = z.input<typeof pcbKeepoutProps>\n\nexport const schematicBoxProps = z.object({\n  schX: distance,\n  schY: distance,\n  width: distance,\n  height: distance,\n})\nexport type SchematicBoxProps = z.input<typeof schematicBoxProps>\n\nexport const schematicTextProps = z.object({\n  schX: distance,\n  schY: distance,\n  text: z.string(),\n})\nexport type SchematicTextProps = z.input<typeof schematicTextProps>\n\nexport const schematicLineProps = z.object({\n  x1: distance,\n  y1: distance,\n  x2: distance,\n  y2: distance,\n})\nexport type SchematicLineProps = z.input<typeof schematicLineProps>\n\nexport const schematicPathProps = z.object({\n  points: z.array(point),\n  isFilled: z.boolean().optional().default(false),\n  fillColor: z.enum([\"red\", \"blue\"]).optional(),\n})\nexport type SchematicPathProps = z.input<typeof schematicPathProps>\n\nexport const componentProps = commonComponentProps\nexport type ComponentProps = z.input<typeof componentProps>\n\nexport const powerSourceProps = commonComponentProps.extend({\n  voltage,\n})\nexport type PowerSourceProps = z.input<typeof powerSourceProps>\n\nexport const portProps = commonLayoutProps.extend({\n  name: z.string(),\n  pinNumber: z.number().optional(),\n  aliases: z.array(z.string()).optional(),\n  direction: direction,\n})\nexport type PortProps = z.input<typeof portProps>\n\nexport const silkscreenTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type SilkscreenTextProps = z.input<typeof silkscreenTextProps>\n\nexport const silkscreenPathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type SilkscreenPathProps = z.input<typeof silkscreenPathProps>\n\nexport const silkscreenLineProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    strokeWidth: distance,\n    x1: distance,\n    y1: distance,\n    x2: distance,\n    y2: distance,\n  })\nexport type SilkscreenLineProps = z.input<typeof silkscreenLineProps>\n\nexport const silkscreenRectProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    width: distance,\n    height: distance,\n  })\nexport type SilkscreenRectProps = z.input<typeof silkscreenRectProps>\n\nexport const silkscreenCircleProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    radius: distance,\n  })\nexport type SilkscreenCircleProps = z.input<typeof silkscreenCircleProps>\n\nexport const routeHintPointProps = z.object({\n  x: distance,\n  y: distance,\n  via: z.boolean().optional(),\n  toLayer: layer_ref.optional(),\n})\n\nexport const traceHintProps = z.object({\n  for: z\n    .string()\n    .optional()\n    .describe(\n      \"Selector for the port you're targeting, not required if you're inside a trace\",\n    ),\n  order: z.number().optional(),\n  offset: route_hint_point.or(routeHintPointProps).optional(),\n  offsets: z\n    .array(route_hint_point)\n    .or(z.array(routeHintPointProps))\n    .optional(),\n  traceWidth: z.number().optional(),\n})\n\nexport type TraceHintProps = z.input<typeof traceHintProps>\n\nexport const pcbTraceProps = z.object({\n  layer: z.string().optional(),\n  thickness: distance.optional(),\n  route: z.array(route_hint_point),\n})\nexport type PcbTraceProps = z.input<typeof pcbTraceProps>\n\nexport const fabricationNoteTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n  color: z.string().optional(),\n})\nexport type FabricationNoteTextProps = z.input<typeof fabricationNoteTextProps>\n\nexport const fabricationNotePathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n    color: z.string().optional(),\n  })\nexport type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>\n","import type { TypeEqual } from \"ts-expect\"\n\nexport const expectTypesMatch = <const T1, const T2>(\n  shouldBe: TypeEqual<T1, T2>,\n): void => {}\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nexport const direction = z.enum([\"up\", \"down\", \"left\", \"right\"])\nexport type Direction = \"up\" | \"down\" | \"left\" | \"right\"\n\nexport type DirectionAlongEdge =\n  | \"top-to-bottom\"\n  | \"left-to-right\"\n  | \"bottom-to-top\"\n  | \"right-to-left\"\n\nexport const directionAlongEdge = z.enum([\n  \"top-to-bottom\",\n  \"left-to-right\",\n  \"bottom-to-top\",\n  \"right-to-left\",\n])\n\nexpectTypesMatch<Direction, z.infer<typeof direction>>(true)\nexpectTypesMatch<DirectionAlongEdge, z.infer<typeof directionAlongEdge>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const portHints = z.array(z.string().or(z.number()))\nexport type PortHints = (string | number)[]\n\nexpectTypesMatch<PortHints, z.infer<typeof portHints>>(true)\n","import { z } from \"zod\"\nimport {\n  type AnySoupElementInput,\n  distance,\n  layer_ref,\n  type LayerRef,\n  type LayerRefInput,\n  rotation,\n  supplier_name,\n} from \"@tscircuit/soup\"\nimport { point3 } from \"./point3\"\nimport {\n  cadModelJscad,\n  cadModelObj,\n  cadModelProp,\n  cadModelStl,\n  type CadModelJscad,\n  type CadModelObj,\n  type CadModelProp,\n  type CadModelStl,\n} from \"./cadModel\"\nimport { footprintProp, type Footprint } from \"./footprintProp\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface PcbLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n  layer?: LayerRefInput\n}\n\nexport interface CommonLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n\n  schX?: string | number\n  schY?: string | number\n  schRotation?: string | number\n\n  layer?: LayerRefInput\n  footprint?: Footprint\n}\n\nexport const pcbLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n})\ntype InferredPcbLayoutProps = z.input<typeof pcbLayoutProps>\nexpectTypesMatch<PcbLayoutProps, InferredPcbLayoutProps>(true)\n\nexport const commonLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n  footprint: footprintProp.optional(),\n})\n\ntype InferredCommonLayoutProps = z.input<typeof commonLayoutProps>\nexpectTypesMatch<CommonLayoutProps, InferredCommonLayoutProps>(true)\n\nexport type SupplierName =\n  | \"jlcpcb\"\n  | \"macrofab\"\n  | \"pcbway\"\n  | \"digikey\"\n  | \"mouser\"\n  | \"lcsc\"\nexport interface SupplierProps {\n  supplierPartNumbers?: { [k in SupplierName]?: string[] }\n}\nexport const supplierProps = z.object({\n  supplierPartNumbers: z.record(supplier_name, z.array(z.string())).optional(),\n})\n\nexpectTypesMatch<SupplierProps, z.input<typeof supplierProps>>(true)\n\nexport interface CommonComponentProps extends CommonLayoutProps {\n  key?: any\n  name: string\n  supplierPartNumbers?: SupplierProps[\"supplierPartNumbers\"]\n  cadModel?: CadModelProp\n  children?: any\n  symbolName?: string\n}\n\nexport const commonComponentProps = commonLayoutProps\n  .merge(supplierProps)\n  .extend({\n    key: z.any().optional(),\n    name: z.string(),\n    cadModel: cadModelProp.optional(),\n    children: z.any().optional(),\n    symbolName: z.string().optional(),\n  })\n\ntype InferredCommonComponentProps = z.input<typeof commonComponentProps>\nexpectTypesMatch<CommonComponentProps, InferredCommonComponentProps>(true)\n\nexport const lrPins = [\"pin1\", \"left\", \"pin2\", \"right\"] as const\nexport const lrPolarPins = [\n  \"pin1\",\n  \"left\",\n  \"anode\",\n  \"pos\",\n  \"pin2\",\n  \"right\",\n  \"cathode\",\n  \"neg\",\n] as const\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n","import { distance } from \"@tscircuit/soup\"\nimport { z } from \"zod\"\n\nexport const point3 = z.object({\n  x: distance,\n  y: distance,\n  z: distance,\n})\n","import { z } from \"zod\"\nimport { point3 } from \"./point3\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const rotationPoint3 = z.object({\n  x: z.union([z.number(), z.string()]),\n  y: z.union([z.number(), z.string()]),\n  z: z.union([z.number(), z.string()]),\n})\n\nexport interface CadModelBase {\n  rotationOffset?:\n    | number\n    | { x: number | string; y: number | string; z: number | string }\n  positionOffset?: {\n    x: number | string\n    y: number | string\n    z: number | string\n  }\n  size?: { x: number | string; y: number | string; z: number | string }\n}\n\nexport const cadModelBase = z.object({\n  rotationOffset: z.number().or(rotationPoint3).optional(),\n  positionOffset: point3.optional(),\n  size: point3.optional(),\n})\n\nexpectTypesMatch<CadModelBase, z.input<typeof cadModelBase>>(true)\n\nexport interface CadModelStl extends CadModelBase {\n  stlUrl: string\n}\nexport const cadModelStl = cadModelBase.extend({\n  stlUrl: z.string(),\n})\n\nexport interface CadModelObj extends CadModelBase {\n  objUrl: string\n  mtlUrl?: string\n}\nexport const cadModelObj = cadModelBase.extend({\n  objUrl: z.string(),\n  mtlUrl: z.string().optional(),\n})\n\nexport interface CadModelJscad extends CadModelBase {\n  jscad: Record<string, any>\n}\nexport const cadModelJscad = cadModelBase.extend({\n  jscad: z.record(z.any()),\n})\n\nexport type CadModelProp = string | CadModelStl | CadModelObj | CadModelJscad\n\nexport const cadModelProp = z.union([\n  z.string(),\n  cadModelStl,\n  cadModelObj,\n  cadModelJscad,\n])\n\ntype InferredCadModelProp = z.input<typeof cadModelProp>\nexpectTypesMatch<CadModelProp, InferredCadModelProp>(true)\n","import type { LayerRef } from \"@tscircuit/soup\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\n\n/**\n * This is an abbreviated definition of the soup elements that you can find here:\n * https://docs.tscircuit.com/api-reference/advanced/soup#pcb-smtpad\n */\nexport type FootprintSoupElements = {\n  type: \"pcb_smtpad\" | \"pcb_plated_hole\"\n  x: string | number\n  y: string | number\n  layer?: LayerRef\n  holeDiameter?: string | number\n  outerDiameter?: string | number\n  shape?: \"circle\" | \"rect\"\n  width?: string | number\n  height?: string | number\n  portHints?: string[]\n}\n\nexport type Footprint = string | ReactElement | FootprintSoupElements[]\nexport const footprintProp = z.custom<Footprint>((v) => true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\n/**\n * @deprecated Use SchematicPortArrangementWithPinCounts instead.\n */\nexport interface SchematicPortArrangementWithSizes {\n  leftSize?: number\n  topSize?: number\n  rightSize?: number\n  bottomSize?: number\n}\n\n/**\n * Specifies the number of pins on each side of the schematic box component.\n */\nexport interface SchematicPortArrangementWithPinCounts {\n  leftPinCount?: number\n  topPinCount?: number\n  rightPinCount?: number\n  bottomPinCount?: number\n}\n\nexport interface PinSideDefinition {\n  pins: number[]\n  direction:\n    | \"top-to-bottom\"\n    | \"left-to-right\"\n    | \"bottom-to-top\"\n    | \"right-to-left\"\n}\n\nexport interface SchematicPortArrangementWithSides {\n  leftSide?: PinSideDefinition\n  topSide?: PinSideDefinition\n  rightSide?: PinSideDefinition\n  bottomSide?: PinSideDefinition\n}\n\nexport interface SchematicPortArrangement\n  extends SchematicPortArrangementWithSizes,\n    SchematicPortArrangementWithSides,\n    SchematicPortArrangementWithPinCounts {}\n\nexport const explicitPinSideDefinition = z.object({\n  pins: z.array(z.number()),\n  direction: z.union([\n    z.literal(\"top-to-bottom\"),\n    z.literal(\"left-to-right\"),\n    z.literal(\"bottom-to-top\"),\n    z.literal(\"right-to-left\"),\n  ]),\n})\n\nexport const schematicPortArrangement = z.object({\n  leftSize: z.number().optional().describe(\"@deprecated, use leftPinCount\"),\n  topSize: z.number().optional().describe(\"@deprecated, use topPinCount\"),\n  rightSize: z.number().optional().describe(\"@deprecated, use rightPinCount\"),\n  bottomSize: z.number().optional().describe(\"@deprecated, use bottomPinCount\"),\n  leftPinCount: z.number().optional(),\n  rightPinCount: z.number().optional(),\n  topPinCount: z.number().optional(),\n  bottomPinCount: z.number().optional(),\n  leftSide: explicitPinSideDefinition.optional(),\n  rightSide: explicitPinSideDefinition.optional(),\n  topSide: explicitPinSideDefinition.optional(),\n  bottomSide: explicitPinSideDefinition.optional(),\n})\n\nexpectTypesMatch<\n  SchematicPortArrangement,\n  z.input<typeof schematicPortArrangement>\n>(true)\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type SchematicPinStyle = Record<\n  string,\n  {\n    leftMargin?: number | string\n    rightMargin?: number | string\n    topMargin?: number | string\n    bottomMargin?: number | string\n  }\n>\n\nexport const schematicPinStyle = z.record(\n  z.object({\n    leftMargin: distance.optional(),\n    rightMargin: distance.optional(),\n    topMargin: distance.optional(),\n    bottomMargin: distance.optional(),\n  }),\n)\n\nexpectTypesMatch<SchematicPinStyle, z.input<typeof schematicPinStyle>>(true)\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { point, type Point } from \"lib/common/point\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport type { SubcircuitGroupProps } from \"./group\"\nimport type { Distance } from \"lib/common/distance\"\n\nexport interface BoardProps {\n  width?: number | string\n  height?: number | string\n  outline?: Point[]\n  pcbX?: number | string\n  pcbY?: number | string\n  layout?: any\n  routingDisabled?: boolean\n  children?: any\n  defaultTraceWidth?: Distance\n}\n\nexport const boardProps = z.object({\n  width: distance.optional(),\n  height: distance.optional(),\n  outline: z.array(point).optional(),\n  pcbX: distance.optional().default(0),\n  pcbY: distance.optional().default(0),\n  layout: z.any().optional(),\n  routingDisabled: z.boolean().optional(),\n  children: z.any(),\n  defaultTraceWidth: distance.optional(),\n})\n\nexpectTypesMatch<BoardProps, z.input<typeof boardProps>>(true)\n","import { distance } from \"@tscircuit/soup\"\nimport { z } from \"zod\"\n\nexport const point = z.object({\n  x: distance,\n  y: distance,\n})\n\nexport type Point = { x: number | string; y: number | string }\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  schematicPortArrangement,\n  type SchematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\nimport {\n  schematicPinStyle,\n  type SchematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport type { Distance } from \"lib/common/distance\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface ChipProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string | string[]>\n  schPortArrangement?: SchematicPortArrangement\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: Distance\n  schWidth?: Distance\n  schHeight?: Distance\n}\n\nexport const chipProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z\n    .record(z.number().or(z.string()), z.string().or(z.array(z.string())))\n    .optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n})\n\n/**\n * @deprecated Use ChipProps instead.\n */\nexport const bugProps = chipProps\nexport type InferredChipProps = z.input<typeof chipProps>\n\nexpectTypesMatch<InferredChipProps, ChipProps>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  schematicPinStyle,\n  type SchematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { distance } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport {\n  schematicPortArrangement,\n  type SchematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\n\nexport interface JumperProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string>\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: number | string\n  schWidth?: number | string\n  schHeight?: number | string\n  schDirection?: \"left\" | \"right\"\n  schPortArrangement?: SchematicPortArrangement\n}\n\nexport const jumperProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z.record(z.number().or(z.string()), z.string()).optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  schDirection: z.enum([\"left\", \"right\"]).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n})\n\ntype InferredJumperProps = z.input<typeof jumperProps>\nexpectTypesMatch<JumperProps, InferredJumperProps>(true)\n","import { z } from \"zod\"\nimport { resistance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  lrPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface ResistorProps extends CommonComponentProps {\n  resistance: number | string\n  pullupFor?: string\n  pullupTo?: string\n  pulldownFor?: string\n  pulldownTo?: string\n}\n\nexport const resistorProps = commonComponentProps.extend({\n  resistance,\n\n  pullupFor: z.string().optional(),\n  pullupTo: z.string().optional(),\n\n  pulldownFor: z.string().optional(),\n  pulldownTo: z.string().optional(),\n})\nexport const resistorPins = lrPins\n\ntype InferredResistorProps = z.input<typeof resistorProps>\nexpectTypesMatch<ResistorProps, InferredResistorProps>(true)\n","import { z } from \"zod\"\nimport { capacitance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface CapacitorProps extends CommonComponentProps {\n  capacitance: number | string\n\n  decouplingFor?: string\n  decouplingTo?: string\n\n  bypassFor?: string\n  bypassTo?: string\n}\n\nexport const capacitorProps = commonComponentProps.extend({\n  capacitance,\n\n  decouplingFor: z.string().optional(),\n  decouplingTo: z.string().optional(),\n\n  bypassFor: z.string().optional(),\n  bypassTo: z.string().optional(),\n})\nexport const capacitorPins = lrPolarPins\n\nexpectTypesMatch<CapacitorProps, z.input<typeof capacitorProps>>(true)\n","import { z } from \"zod\"\nimport { commonLayoutProps, type CommonLayoutProps } from \"lib/common/layout\"\nimport { length } from \"@tscircuit/soup\"\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\n\nexport interface BaseGroupProps extends CommonLayoutProps {\n  name?: string\n  children?: any\n}\n\nexport interface SubcircuitGroupProps extends BaseGroupProps {\n  subcircuit: true\n  layout?: LayoutBuilder\n  routingDisabled?: boolean\n  defaultTraceWidth?: Distance\n}\n\nexport type GroupProps = SubcircuitGroupProps | BaseGroupProps\n\nexport const baseGroupProps = commonLayoutProps.extend({\n  name: z.string().optional(),\n  children: z.any().optional(),\n})\n\nexport const subcircuitGroupProps = baseGroupProps.extend({\n  subcircuit: z.literal(true),\n  layout: z.custom<LayoutBuilder>((v) => true).optional(),\n  routingDisabled: z.boolean().optional(),\n  defaultTraceWidth: length.optional(),\n})\n\nexport const groupProps = z.union([baseGroupProps, subcircuitGroupProps])\n\ntype InferredBaseGroupProps = z.input<typeof baseGroupProps>\ntype InferredSubcircuitGroupProps = z.input<typeof subcircuitGroupProps>\n\nexpectTypesMatch<BaseGroupProps, InferredBaseGroupProps>(true)\nexpectTypesMatch<SubcircuitGroupProps, InferredSubcircuitGroupProps>(true)\n\ntype InferredGroupProps = z.input<typeof groupProps>\nexpectTypesMatch<GroupProps, InferredGroupProps>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface NetProps {\n  name: string\n}\n\nexport const netProps = z.object({\n  name: z.string(),\n})\n\ntype InferredNetProps = z.input<typeof netProps>\nexpectTypesMatch<NetProps, InferredNetProps>(true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface ConstrainedLayoutProps {\n  name?: string\n  pcbOnly?: boolean\n  schOnly?: boolean\n}\n\nexport const constrainedLayoutProps = z.object({\n  name: z.string().optional(),\n  pcbOnly: z.boolean().optional(),\n  schOnly: z.boolean().optional(),\n})\n\nexport type InferredConstrainedLayoutProps = z.input<\n  typeof constrainedLayoutProps\n>\n\nexpectTypesMatch<InferredConstrainedLayoutProps, ConstrainedLayoutProps>(true)\n","import { z } from \"zod\"\n\nexport type Distance = number | string\n\nexport { distance, length } from \"@tscircuit/soup\"\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport type { Distance } from \"lib/common/distance\"\nimport { distance } from \"lib/common/distance\"\nimport { z } from \"zod\"\n\nexport type PcbXDistConstraint = {\n  pcb?: true\n  xDist: Distance\n\n  /**\n   * Selector for left component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  left: string\n\n  /**\n   * Selector for right component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 leftedge\", \".R1 center\"\n   */\n  right: string\n\n  /**\n   * If true, the provided distance is the distance between the closest edges of\n   * the left and right components\n   */\n  edgeToEdge?: true\n\n  /**\n   * If true, the provided distance is the distance between the centers of the\n   * left and right components\n   */\n  centerToCenter?: true\n}\n\nexport type PcbYDistConstraint = {\n  pcb?: true\n  yDist: Distance\n\n  /**\n   * Selector for top component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 topedge\", \".R1 center\"\n   */\n  top: string\n\n  /**\n   * Selector for bottom component, e.g. \".U1\" or \".R1\", you can also specify the\n   * edge or center of the component e.g. \".R1 bottomedge\", \".R1 center\"\n   */\n  bottom: string\n\n  edgeToEdge?: true\n  centerToCenter?: true\n}\n\nexport type PcbSameYConstraint = {\n  pcb?: true\n  sameY?: true\n\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type PcbSameXConstraint = {\n  pcb?: true\n  sameX?: true\n  /**\n   * Selector for components, e.g. [\".U1\", \".R1\"], you can also specify the\n   * edge or center of the component e.g. [\".R1 leftedge\", \".U1 center\"]\n   */\n  for: string[]\n}\n\nexport type ConstraintProps =\n  | PcbXDistConstraint\n  | PcbYDistConstraint\n  | PcbSameYConstraint\n  | PcbSameXConstraint\n\n// -----------------------------------------------------------------------------\n// Zod\n// -----------------------------------------------------------------------------\n\nexport const pcbXDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  xDist: distance,\n  left: z.string(),\n  right: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbXDistConstraint, z.input<typeof pcbXDistConstraintProps>>(\n  true,\n)\n\nexport const pcbYDistConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  yDist: distance,\n  top: z.string(),\n  bottom: z.string(),\n\n  edgeToEdge: z.literal(true).optional(),\n  centerToCenter: z.literal(true).optional(),\n})\nexpectTypesMatch<PcbYDistConstraint, z.input<typeof pcbYDistConstraintProps>>(\n  true,\n)\n\nexport const pcbSameYConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameY: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameYConstraint, z.input<typeof pcbSameYConstraintProps>>(\n  true,\n)\n\nexport const pcbSameXConstraintProps = z.object({\n  pcb: z.literal(true).optional(),\n  sameX: z.literal(true).optional(),\n  for: z.array(z.string()),\n})\nexpectTypesMatch<PcbSameXConstraint, z.input<typeof pcbSameXConstraintProps>>(\n  true,\n)\n\nexport const constraintProps = z.union([\n  pcbXDistConstraintProps,\n  pcbYDistConstraintProps,\n  pcbSameYConstraintProps,\n  pcbSameXConstraintProps,\n])\n\nexpectTypesMatch<ConstraintProps, z.input<typeof constraintProps>>(true)\n","import {\n  pcbLayoutProps,\n  type CommonLayoutProps,\n  type PcbLayoutProps,\n} from \"lib/common/layout\"\nimport { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { portHints, type PortHints } from \"lib/common/portHints\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n  portHints?: PortHints\n}\n\nexport interface CircleSmtPadProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n  portHints?: PortHints\n}\n\nexport type SmtPadProps = RectSmtPadProps | CircleSmtPadProps\n\n// ----------------------------------------------------------------------------\n// Zod\n// ----------------------------------------------------------------------------\n\nexport const rectSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredRectSmtPadProps = z.input<typeof rectSmtPadProps>\nexpectTypesMatch<InferredRectSmtPadProps, RectSmtPadProps>(true)\n\nexport const circleSmtPadProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n    portHints: portHints.optional(),\n  })\ntype InferredCircleSmtPadProps = z.input<typeof circleSmtPadProps>\nexpectTypesMatch<InferredCircleSmtPadProps, CircleSmtPadProps>(true)\n\nexport const smtPadProps = z.union([circleSmtPadProps, rectSmtPadProps])\n\nexport type InferredSmtPadProps = z.input<typeof smtPadProps>\nexpectTypesMatch<InferredSmtPadProps, SmtPadProps>(true)\n","import { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { boolean, string, z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface RectSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"rect\"\n  width: Distance\n  height: Distance\n}\n\nexport interface CircleSolderPasteProps\n  extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  shape: \"circle\"\n  radius: Distance\n}\n\nexport type SolderPasteProps = RectSolderPasteProps | CircleSolderPasteProps\n\n// zod\n\nexport const rectSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"rect\"),\n    width: distance,\n    height: distance,\n  })\ntype InferredRectSolderPasteProps = z.input<typeof rectSolderPasteProps>\nexpectTypesMatch<InferredRectSolderPasteProps, RectSolderPasteProps>(true)\n\nexport const circleSolderPasteProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    shape: z.literal(\"circle\"),\n    radius: distance,\n  })\ntype InferredCircleSolderPasteProps = z.input<typeof circleSolderPasteProps>\nexpectTypesMatch<InferredCircleSolderPasteProps, CircleSolderPasteProps>(true)\n\nexport const solderPasteProps = z.union([\n  circleSolderPasteProps,\n  rectSolderPasteProps,\n])\n\nexport type InferredSolderPasteProps = z.input<typeof solderPasteProps>\nexpectTypesMatch<InferredSolderPasteProps, SolderPasteProps>(true)\n","import { z } from \"zod\"\nimport { distance, type Distance } from \"lib/common/distance\"\nimport { pcbLayoutProps, type PcbLayoutProps } from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface HoleProps extends Omit<PcbLayoutProps, \"pcbRotation\"> {\n  name?: string\n  diameter?: Distance\n  radius?: Distance\n}\n\nexport const holeProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    name: z.string().optional(),\n    diameter: distance.optional(),\n    radius: distance.optional(),\n  })\n  .transform((d) => ({\n    ...d,\n    diameter: d.diameter ?? 2 * d.radius!,\n    radius: d.radius ?? d.diameter! / 2,\n  }))\n\nexport type InferredHoleProps = z.input<typeof holeProps>\n\nexpectTypesMatch<HoleProps, InferredHoleProps>(true)\n","import { z } from \"zod\"\nimport { distance, route_hint_point } from \"@tscircuit/soup\"\nimport { point } from \"../common/point\"\n\nexport const portRef = z.union([\n  z.string(),\n  z.custom<{ getPortSelector: () => string }>((v) =>\n    Boolean(v.getPortSelector),\n  ),\n])\n\nconst baseTraceProps = z.object({\n  key: z.string().optional(),\n  thickness: distance.optional(),\n  schematicRouteHints: z.array(point).optional(),\n  pcbRouteHints: z.array(route_hint_point).optional(),\n})\n\nexport const traceProps = z.union([\n  baseTraceProps.extend({\n    path: z.array(portRef),\n  }),\n  baseTraceProps.extend({\n    from: portRef,\n    to: portRef,\n  }),\n])\n\nexport type TraceProps = z.input<typeof traceProps>\n","import { layer_ref, type LayerRef } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\nexport interface FootprintProps {\n  /**\n   * The layer that the footprint is designed for. If you set this to \"top\"\n   * then it means the children were intended to represent the top layer. If\n   * the <chip /> with this footprint is moved to the bottom layer, then the\n   * components will be mirrored.\n   *\n   * Generally, you shouldn't set this except where it can help prevent\n   * confusion because you have a complex multi-layer footprint. Default is\n   * \"top\" and this is most intuitive.\n   */\n  originalLayer?: LayerRef\n}\n\nexport const footprintProps = z.object({\n  originalLayer: layer_ref.default(\"top\").optional(),\n})\n\nexport type FootprintPropsInput = z.input<typeof footprintProps>\ntype InferredFootprintProps = z.infer<typeof footprintProps>\nexpectTypesMatch<InferredFootprintProps, FootprintProps>(true)\n"],"mappings":";;;;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,8BAAAA;AAAA,EAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AASA,IAAAC,gBAeO;AAEP,IAAAC,eAAkB;;;ACxBX,IAAM,mBAAmB,CAC9B,aACS;AAAC;;;ACHZ,iBAAkB;AACX,IAAM,YAAY,aAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC;AASxD,IAAM,qBAAqB,aAAE,KAAK;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAuD,IAAI;AAC3D,iBAAyE,IAAI;;;ACnB7E,IAAAC,cAAkB;AAGX,IAAM,YAAY,cAAE,MAAM,cAAE,OAAO,EAAE,GAAG,cAAE,OAAO,CAAC,CAAC;AAG1D,iBAAuD,IAAI;;;ACN3D,IAAAC,cAAkB;AAClB,IAAAC,eAQO;;;ACTP,kBAAyB;AACzB,IAAAC,cAAkB;AAEX,IAAM,SAAS,cAAE,OAAO;AAAA,EAC7B,GAAG;AAAA,EACH,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ACPD,IAAAC,cAAkB;AAIX,IAAM,iBAAiB,cAAE,OAAO;AAAA,EACrC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AACrC,CAAC;AAcM,IAAM,eAAe,cAAE,OAAO;AAAA,EACnC,gBAAgB,cAAE,OAAO,EAAE,GAAG,cAAc,EAAE,SAAS;AAAA,EACvD,gBAAgB,OAAO,SAAS;AAAA,EAChC,MAAM,OAAO,SAAS;AACxB,CAAC;AAED,iBAA6D,IAAI;AAK1D,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQ,cAAE,OAAO;AACnB,CAAC;AAMM,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQ,cAAE,OAAO;AAAA,EACjB,QAAQ,cAAE,OAAO,EAAE,SAAS;AAC9B,CAAC;AAKM,IAAM,gBAAgB,aAAa,OAAO;AAAA,EAC/C,OAAO,cAAE,OAAO,cAAE,IAAI,CAAC;AACzB,CAAC;AAIM,IAAM,eAAe,cAAE,MAAM;AAAA,EAClC,cAAE,OAAO;AAAA,EACT;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAqD,IAAI;;;AC7DzD,IAAAC,cAAkB;AAoBX,IAAM,gBAAgB,cAAE,OAAkB,CAAC,MAAM,IAAI;;;AHsBrD,IAAM,iBAAiB,cAAE,OAAO;AAAA,EACrC,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,OAAO,uBAAU,SAAS;AAC5B,CAAC;AAED,iBAAyD,IAAI;AAEtD,IAAM,oBAAoB,cAAE,OAAO;AAAA,EACxC,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,OAAO,uBAAU,SAAS;AAAA,EAC1B,WAAW,cAAc,SAAS;AACpC,CAAC;AAGD,iBAA+D,IAAI;AAY5D,IAAM,gBAAgB,cAAE,OAAO;AAAA,EACpC,qBAAqB,cAAE,OAAO,4BAAe,cAAE,MAAM,cAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAC7E,CAAC;AAED,iBAA+D,IAAI;AAW5D,IAAM,uBAAuB,kBACjC,MAAM,aAAa,EACnB,OAAO;AAAA,EACN,KAAK,cAAE,IAAI,EAAE,SAAS;AAAA,EACtB,MAAM,cAAE,OAAO;AAAA,EACf,UAAU,aAAa,SAAS;AAAA,EAChC,UAAU,cAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,YAAY,cAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAGH,iBAAqE,IAAI;AAElE,IAAM,SAAS,CAAC,QAAQ,QAAQ,QAAQ,OAAO;AAC/C,IAAM,cAAc;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAEO,IAAM,uBAAuB,sBAAS,GAAG,cAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;;;AIpH1E,IAAAC,cAAkB;AA2CX,IAAM,4BAA4B,cAAE,OAAO;AAAA,EAChD,MAAM,cAAE,MAAM,cAAE,OAAO,CAAC;AAAA,EACxB,WAAW,cAAE,MAAM;AAAA,IACjB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,EAC3B,CAAC;AACH,CAAC;AAEM,IAAM,2BAA2B,cAAE,OAAO;AAAA,EAC/C,UAAU,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,+BAA+B;AAAA,EACxE,SAAS,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,8BAA8B;AAAA,EACtE,WAAW,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,gCAAgC;AAAA,EAC1E,YAAY,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,iCAAiC;AAAA,EAC5E,cAAc,cAAE,OAAO,EAAE,SAAS;AAAA,EAClC,eAAe,cAAE,OAAO,EAAE,SAAS;AAAA,EACnC,aAAa,cAAE,OAAO,EAAE,SAAS;AAAA,EACjC,gBAAgB,cAAE,OAAO,EAAE,SAAS;AAAA,EACpC,UAAU,0BAA0B,SAAS;AAAA,EAC7C,WAAW,0BAA0B,SAAS;AAAA,EAC9C,SAAS,0BAA0B,SAAS;AAAA,EAC5C,YAAY,0BAA0B,SAAS;AACjD,CAAC;AAED,iBAGE,IAAI;;;ACxEN,IAAAC,cAAkB;AAClB,IAAAC,eAAyB;AAalB,IAAM,oBAAoB,cAAE;AAAA,EACjC,cAAE,OAAO;AAAA,IACP,YAAY,sBAAS,SAAS;AAAA,IAC9B,aAAa,sBAAS,SAAS;AAAA,IAC/B,WAAW,sBAAS,SAAS;AAAA,IAC7B,cAAc,sBAAS,SAAS;AAAA,EAClC,CAAC;AACH;AAEA,iBAAuE,IAAI;;;ACvB3E,IAAAC,eAAkB;AAClB,IAAAC,eAAyB;;;ACDzB,IAAAC,eAAyB;AACzB,IAAAC,cAAkB;AAEX,IAAM,QAAQ,cAAE,OAAO;AAAA,EAC5B,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ADaM,IAAM,aAAa,eAAE,OAAO;AAAA,EACjC,OAAO,sBAAS,SAAS;AAAA,EACzB,QAAQ,sBAAS,SAAS;AAAA,EAC1B,SAAS,eAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EACjC,MAAM,sBAAS,SAAS,EAAE,QAAQ,CAAC;AAAA,EACnC,MAAM,sBAAS,SAAS,EAAE,QAAQ,CAAC;AAAA,EACnC,QAAQ,eAAE,IAAI,EAAE,SAAS;AAAA,EACzB,iBAAiB,eAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,UAAU,eAAE,IAAI;AAAA,EAChB,mBAAmB,sBAAS,SAAS;AACvC,CAAC;AAED,iBAAyD,IAAI;;;AE/B7D,IAAAC,eAAkB;AAClB,IAAAC,eAAyB;AA0BlB,IAAM,YAAY,qBAAqB,OAAO;AAAA,EACnD,wBAAwB,eAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,eACR,OAAO,eAAE,OAAO,EAAE,GAAG,eAAE,OAAO,CAAC,GAAG,eAAE,OAAO,EAAE,GAAG,eAAE,MAAM,eAAE,OAAO,CAAC,CAAC,CAAC,EACpE,SAAS;AAAA,EACZ,oBAAoB,yBAAyB,SAAS;AAAA,EACtD,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAe,sBAAS,SAAS;AAAA,EACjC,UAAU,sBAAS,SAAS;AAAA,EAC5B,WAAW,sBAAS,SAAS;AAC/B,CAAC;AAKM,IAAM,WAAW;AAGxB,iBAA+C,IAAI;;;AC7CnD,IAAAC,eAAkB;AASlB,IAAAC,eAAyB;AAkBlB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,wBAAwB,eAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,eAAE,OAAO,eAAE,OAAO,EAAE,GAAG,eAAE,OAAO,CAAC,GAAG,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACpE,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAe,sBAAS,SAAS;AAAA,EACjC,UAAU,sBAAS,SAAS;AAAA,EAC5B,WAAW,sBAAS,SAAS;AAAA,EAC7B,cAAc,eAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACjD,oBAAoB,yBAAyB,SAAS;AACxD,CAAC;AAGD,iBAAmD,IAAI;;;ACvCvD,IAAAC,eAAkB;AAClB,IAAAC,eAA2B;AAgBpB,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AAAA,EAEA,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAU,eAAE,OAAO,EAAE,SAAS;AAAA,EAE9B,aAAa,eAAE,OAAO,EAAE,SAAS;AAAA,EACjC,YAAY,eAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AACM,IAAM,eAAe;AAG5B,iBAAuD,IAAI;;;AC7B3D,IAAAC,eAAkB;AAClB,IAAAC,eAA4B;AAmBrB,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD;AAAA,EAEA,eAAe,eAAE,OAAO,EAAE,SAAS;AAAA,EACnC,cAAc,eAAE,OAAO,EAAE,SAAS;AAAA,EAElC,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAU,eAAE,OAAO,EAAE,SAAS;AAChC,CAAC;AACM,IAAM,gBAAgB;AAE7B,iBAAiE,IAAI;;;AC/BrE,IAAAC,eAAkB;AAElB,IAAAC,gBAAuB;AAmBhB,IAAM,iBAAiB,kBAAkB,OAAO;AAAA,EACrD,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAU,eAAE,IAAI,EAAE,SAAS;AAC7B,CAAC;AAEM,IAAM,uBAAuB,eAAe,OAAO;AAAA,EACxD,YAAY,eAAE,QAAQ,IAAI;AAAA,EAC1B,QAAQ,eAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACtD,iBAAiB,eAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,mBAAmB,qBAAO,SAAS;AACrC,CAAC;AAEM,IAAM,aAAa,eAAE,MAAM,CAAC,gBAAgB,oBAAoB,CAAC;AAKxE,iBAAyD,IAAI;AAC7D,iBAAqE,IAAI;AAGzE,iBAAiD,IAAI;;;AC1CrD,IAAAC,eAAkB;AAOX,IAAM,WAAW,eAAE,OAAO;AAAA,EAC/B,MAAM,eAAE,OAAO;AACjB,CAAC;AAGD,iBAA6C,IAAI;;;ACXjD,IAAAC,eAAkB;AAQX,IAAM,yBAAyB,eAAE,OAAO;AAAA,EAC7C,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,SAAS,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC9B,SAAS,eAAE,QAAQ,EAAE,SAAS;AAChC,CAAC;AAMD,iBAAyE,IAAI;;;ACnB7E,IAAAC,eAAkB;AAIlB,IAAAC,gBAAiC;;;ACDjC,IAAAC,eAAkB;AAkFX,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO;AAAA,EACP,MAAM,eAAE,OAAO;AAAA,EACf,OAAO,eAAE,OAAO;AAAA,EAEhB,YAAY,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgB,eAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO;AAAA,EACP,KAAK,eAAE,OAAO;AAAA,EACd,QAAQ,eAAE,OAAO;AAAA,EAEjB,YAAY,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EACrC,gBAAgB,eAAE,QAAQ,IAAI,EAAE,SAAS;AAC3C,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAK,eAAE,MAAM,eAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,0BAA0B,eAAE,OAAO;AAAA,EAC9C,KAAK,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAC9B,OAAO,eAAE,QAAQ,IAAI,EAAE,SAAS;AAAA,EAChC,KAAK,eAAE,MAAM,eAAE,OAAO,CAAC;AACzB,CAAC;AACD;AAAA,EACE;AACF;AAEO,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAmE,IAAI;;;ACnIvE,IAAAC,eAAkB;AAwBX,IAAM,kBAAkB,eAC5B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,MAAM;AAAA,EACvB,OAAO;AAAA,EACP,QAAQ;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA2D,IAAI;AAExD,IAAM,oBAAoB,eAC9B,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQ;AAAA,EACR,WAAW,UAAU,SAAS;AAChC,CAAC;AAEH,iBAA+D,IAAI;AAE5D,IAAM,cAAc,eAAE,MAAM,CAAC,mBAAmB,eAAe,CAAC;AAGvE,iBAAmD,IAAI;;;ACnDvD,IAAAC,eAAmC;AAoB5B,IAAM,uBAAuB,eACjC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,MAAM;AAAA,EACvB,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAEH,iBAAqE,IAAI;AAElE,IAAM,yBAAyB,eACnC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,QAAQ;AACV,CAAC;AAEH,iBAAyE,IAAI;AAEtE,IAAM,mBAAmB,eAAE,MAAM;AAAA,EACtC;AAAA,EACA;AACF,CAAC;AAGD,iBAA6D,IAAI;;;AC/CjE,IAAAC,eAAkB;AAWX,IAAM,YAAY,eACtB,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,UAAU,uBAAS,SAAS;AAAA,EAC5B,QAAQ,uBAAS,SAAS;AAC5B,CAAC,EACA,UAAU,CAAC,OAAO;AAAA,EACjB,GAAG;AAAA,EACH,UAAU,EAAE,YAAY,IAAI,EAAE;AAAA,EAC9B,QAAQ,EAAE,UAAU,EAAE,WAAY;AACpC,EAAE;AAIJ,iBAA+C,IAAI;;;AC1BnD,IAAAC,eAAkB;AAClB,IAAAC,gBAA2C;AAGpC,IAAM,UAAU,eAAE,MAAM;AAAA,EAC7B,eAAE,OAAO;AAAA,EACT,eAAE;AAAA,IAA0C,CAAC,MAC3C,QAAQ,EAAE,eAAe;AAAA,EAC3B;AACF,CAAC;AAED,IAAM,iBAAiB,eAAE,OAAO;AAAA,EAC9B,KAAK,eAAE,OAAO,EAAE,SAAS;AAAA,EACzB,WAAW,uBAAS,SAAS;AAAA,EAC7B,qBAAqB,eAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EAC7C,eAAe,eAAE,MAAM,8BAAgB,EAAE,SAAS;AACpD,CAAC;AAEM,IAAM,aAAa,eAAE,MAAM;AAAA,EAChC,eAAe,OAAO;AAAA,IACpB,MAAM,eAAE,MAAM,OAAO;AAAA,EACvB,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,MAAM;AAAA,IACN,IAAI;AAAA,EACN,CAAC;AACH,CAAC;;;AC1BD,IAAAC,gBAAyC;AAEzC,IAAAC,eAAkB;AAgBX,IAAM,iBAAiB,eAAE,OAAO;AAAA,EACrC,eAAe,wBAAU,QAAQ,KAAK,EAAE,SAAS;AACnD,CAAC;AAID,iBAAyD,IAAI;;;AzBwCtD,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AACF,CAAC;AACM,IAAM,eAAe;AAGrB,IAAM,aAAa,qBAAqB,OAAO,CAAC,CAAC;AACjD,IAAM,YAAY;AAGlB,IAAM,WAAW,qBAAqB,OAAO;AAAA,EAClD,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AACM,IAAM,UAAU;AAGhB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,YAAY,eAAE,KAAK,CAAC,MAAM,CAAC,EAAE,QAAQ,MAAM;AAAA,EAC3C,kBAAkB,eAAE,QAAQ,EAAE,QAAQ,KAAK;AAC7C,CAAC;AAGM,IAAMC,wBAAuB,uBAAS,GAAG,eAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;AAEnE,IAAM,WAAW,kBAAkB,OAAO;AAAA,EAC/C,WAAW;AAAA,EACX,SAAS;AAAA,EACT,cAAc;AAAA,EACd,eAAe;AACjB,CAAC;AAGM,IAAM,gBAAgB,kBAAkB,OAAO;AAAA,EACpD,KAAK,eAAE,OAAO,EAAE,SAAS;AAC3B,CAAC;AAGM,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAO,eAAE,QAAQ,QAAQ;AAAA,IACzB,cAAc;AAAA,IACd,eAAe;AAAA,IACf,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,IAC1B,OAAO,eAAE,QAAQ,MAAM;AAAA,IACvB,YAAY;AAAA,IACZ,aAAa;AAAA,IACb,YAAY;AAAA,IACZ,aAAa;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AACH,CAAC;AAGM,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAO,eAAE,QAAQ,QAAQ;AAAA,IACzB,QAAQ;AAAA,EACV,CAAC;AAAA,EACD,eAAe,OAAO;AAAA,IACpB,OAAO,eAAE,QAAQ,MAAM;AAAA,IACvB,OAAO;AAAA,IACP,QAAQ;AAAA,EACV,CAAC;AACH,CAAC;AAGM,IAAM,oBAAoB,eAAE,OAAO;AAAA,EACxC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,MAAM,eAAE,OAAO;AACjB,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AACN,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,QAAQ,eAAE,MAAM,mBAAK;AAAA,EACrB,UAAU,eAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC9C,WAAW,eAAE,KAAK,CAAC,OAAO,MAAM,CAAC,EAAE,SAAS;AAC9C,CAAC;AAGM,IAAM,iBAAiB;AAGvB,IAAM,mBAAmB,qBAAqB,OAAO;AAAA,EAC1D;AACF,CAAC;AAGM,IAAM,YAAY,kBAAkB,OAAO;AAAA,EAChD,MAAM,eAAE,OAAO;AAAA,EACf,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,SAAS,eAAE,MAAM,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC;AACF,CAAC;AAGM,IAAM,sBAAsB,eAAe,OAAO;AAAA,EACvD,MAAM,eAAE,OAAO;AAAA,EACf,iBAAiB,eACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAM,eAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAU,qBAAO,SAAS;AAC5B,CAAC;AAGM,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAO,eAAE,MAAM,8BAAgB;AAAA,EAC/B,aAAa,qBAAO,SAAS;AAC/B,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,aAAa;AAAA,EACb,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AACN,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAU,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAW,eAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAa,uBAAS,SAAS;AAAA,EAC/B,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAGI,IAAM,wBAAwB,eAClC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAU,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAW,eAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAa,uBAAS,SAAS;AAAA,EAC/B,QAAQ;AACV,CAAC;AAGI,IAAM,sBAAsB,eAAE,OAAO;AAAA,EAC1C,GAAG;AAAA,EACH,GAAG;AAAA,EACH,KAAK,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC1B,SAAS,wBAAU,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiB,eAAE,OAAO;AAAA,EACrC,KAAK,eACF,OAAO,EACP,SAAS,EACT;AAAA,IACC;AAAA,EACF;AAAA,EACF,OAAO,eAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,QAAQ,+BAAiB,GAAG,mBAAmB,EAAE,SAAS;AAAA,EAC1D,SAAS,eACN,MAAM,8BAAgB,EACtB,GAAG,eAAE,MAAM,mBAAmB,CAAC,EAC/B,SAAS;AAAA,EACZ,YAAY,eAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAIM,IAAM,gBAAgB,eAAE,OAAO;AAAA,EACpC,OAAO,eAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,WAAW,uBAAS,SAAS;AAAA,EAC7B,OAAO,eAAE,MAAM,8BAAgB;AACjC,CAAC;AAGM,IAAM,2BAA2B,eAAe,OAAO;AAAA,EAC5D,MAAM,eAAE,OAAO;AAAA,EACf,iBAAiB,eACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAM,eAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAU,qBAAO,SAAS;AAAA,EAC1B,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AAGM,IAAM,2BAA2B,eACrC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAO,eAAE,MAAM,8BAAgB;AAAA,EAC/B,aAAa,qBAAO,SAAS;AAAA,EAC7B,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;","names":["distanceOrMultiplier","import_soup","import_zod","import_zod","import_zod","import_soup","import_zod","import_zod","import_zod","import_zod","import_zod","import_soup","import_zod","import_soup","import_soup","import_zod","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_zod","import_zod","import_soup","import_zod","import_zod","import_zod","import_zod","import_zod","import_soup","import_soup","import_zod","distanceOrMultiplier"]}

package/lib/components/chip.ts

@@ -17,7 +17,7 @@ import { expectTypesMatch } from "lib/typecheck"
 
 export interface ChipProps extends CommonComponentProps {
   manufacturerPartNumber?: string
-  pinLabels?: Record<number | string, string>
+  pinLabels?: Record<number | string, string | string[]>
   schPortArrangement?: SchematicPortArrangement
   schPinStyle?: SchematicPinStyle
   schPinSpacing?: Distance
@@ -27,7 +27,9 @@ export interface ChipProps extends CommonComponentProps {
 
 export const chipProps = commonComponentProps.extend({
   manufacturerPartNumber: z.string().optional(),
-  pinLabels: z.record(z.number().or(z.string()), z.string()).optional(),
+  pinLabels: z
+    .record(z.number().or(z.string()), z.string().or(z.array(z.string())))
+    .optional(),
   schPortArrangement: schematicPortArrangement.optional(),
   schPinStyle: schematicPinStyle.optional(),
   schPinSpacing: distance.optional(),

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@tscircuit/props",
-  "version": "0.0.68",
+  "version": "0.0.69",
   "description": "Props for tscircuit builtin component types",
   "main": "dist/index.js",
   "scripts": {