@tscircuit/props 0.0.677 → 0.0.679

package/README.md

@@ -420,6 +420,17 @@ export interface BoardProps extends Omit<
   "subcircuit" | "connections" | "outline"
 > {
   title?: string;
+  /**
+   * Assembly mounting target, such as "NEMA17.backface". Trimmed; omitted
+   * leaves the board unattached. The target face is resolved by the consumer.
+   */
+  mountedTo?: string;
+  /**
+   * Nonnegative finite clearance between the target mounting face and the
+   * nearest PCB surface, in millimeters or a unit string. Parsed to mm.
+   * Omitted leaves the gap unset; only meaningful when mountedTo is supplied.
+   */
+  mountGap?: Distance;
   /** Fabricator preset, preserved as supplied. Omitted leaves the preset unset. */
   fabricatorPreset?:
     | "jlcpcb_economy"
@@ -1507,6 +1518,14 @@ export interface PcbBendProps {
   bendAngle: number | string;
   /** Positive neutral-surface radius, in mm or a distance string. */
   bendRadius: Distance;
+  /**
+   * Radius of circular tear-relief cutouts centered at both bend endpoints in
+   * the flat PCB. Removes material to round the edge where each cutout meets
+   * the board outline. Finite and positive, in mm or a distance string;
+   * parsed to mm. Omit to leave the outline unchanged (no tear reliefs).
+   * Independent of bendRadius and bendSide; no aliases or conflicting props.
+   */
+  tearReliefRadius?: Distance;
   /** Moving side, looking from (x1, y1) toward (x2, y2) in the flat layout. */
   bendSide: "left" | "right";
 }

package/dist/index.d.ts

@@ -128,74 +128,6 @@ declare const assemblyDeviceProps: z.ZodEffects<z.ZodObject<{
 }>;
 type AssemblyDevicePropsInput = z.input<typeof assemblyDeviceProps>;
 
-interface AssemblyScreenProps {
-    /** Stable product-level identity for the screen assembly. */
-    name: string;
-    /** Imported CAD model URL. Mutually exclusive with cadModel where supported. */
-    modelUrl?: string;
-    /** Modelprinter/footprinter string, trimmed; mutually exclusive with other model sources. */
-    model?: string;
-    /** Selector for the connector that the screen attaches to. */
-    connectsTo: string;
-    /**
-     * Outer width of the screen body, including its bezel but excluding the flex
-     * cable. When supplied, it must be provided together with `height`.
-     */
-    width?: Distance;
-    /**
-     * Outer height of the screen body, including its bezel but excluding the flex
-     * cable. When supplied, it must be provided together with `width`.
-     */
-    height?: Distance;
-    /**
-     * Advanced modelprinter string used to render the screen assembly. Required
-     * when `width`, `height`, `model`, and `modelUrl` are omitted.
-     */
-    cadModel?: string;
-}
-declare const assemblyScreenProps: z.ZodEffects<z.ZodObject<{
-    name: z.ZodEffects<z.ZodString, string, string>;
-    model: z.ZodOptional<z.ZodString>;
-    modelUrl: z.ZodOptional<z.ZodEffects<z.ZodType<string, z.ZodTypeDef, string>, string, string>>;
-    connectsTo: z.ZodEffects<z.ZodString, string, string>;
-    width: z.ZodOptional<z.ZodEffects<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, number, string | number>>;
-    height: z.ZodOptional<z.ZodEffects<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, number, string | number>>;
-    cadModel: z.ZodOptional<z.ZodEffects<z.ZodString, string, string>>;
-}, "strip", z.ZodTypeAny, {
-    name: string;
-    connectsTo: string;
-    width?: number | undefined;
-    height?: number | undefined;
-    model?: string | undefined;
-    modelUrl?: string | undefined;
-    cadModel?: string | undefined;
-}, {
-    name: string;
-    connectsTo: string;
-    width?: string | number | undefined;
-    height?: string | number | undefined;
-    model?: string | undefined;
-    modelUrl?: string | undefined;
-    cadModel?: string | undefined;
-}>, {
-    name: string;
-    connectsTo: string;
-    width?: number | undefined;
-    height?: number | undefined;
-    model?: string | undefined;
-    modelUrl?: string | undefined;
-    cadModel?: string | undefined;
-}, {
-    name: string;
-    connectsTo: string;
-    width?: string | number | undefined;
-    height?: string | number | undefined;
-    model?: string | undefined;
-    modelUrl?: string | undefined;
-    cadModel?: string | undefined;
-}>;
-type AssemblyScreenPropsInput = z.input<typeof assemblyScreenProps>;
-
 declare const rotationPoint3: z.ZodObject<{
     x: z.ZodUnion<[z.ZodNumber, z.ZodString]>;
     y: z.ZodUnion<[z.ZodNumber, z.ZodString]>;
@@ -3170,6 +3102,125 @@ declare const cadModelProp: z.ZodUnion<[z.ZodNull, z.ZodString, z.ZodType<ReactE
     stepUrl?: string | undefined;
 }>]>;
 
+type AssemblyMotorStandard = "nema8" | "nema17" | "nema23";
+interface AssemblyMotorProps {
+    /** Stable assembly identity used by selectors. */
+    name: string;
+    /** Human-facing alternate to the stable name. */
+    displayName?: string;
+    /** NEMA frame standard; required when model is omitted, exclusive with model. */
+    standard?: AssemblyMotorStandard;
+    /** Advanced modelprinter string, trimmed; exclusive with standard. */
+    model?: string;
+    /**
+     * Direction from the motor body toward the shaft tip in the right-handed
+     * circuit frame: +X right, +Y top, +Z above the board. This is a direction,
+     * not a position; it does not specify translation or rotation about the
+     * shaft. Defaults to "z+", the native shaft axis of the NEMA models.
+     */
+    shaftFacingDirection?: CadModelAxisDirection;
+}
+declare const assemblyMotorProps: z.ZodEffects<z.ZodObject<{
+    name: z.ZodEffects<z.ZodString, string, string>;
+    displayName: z.ZodOptional<z.ZodString>;
+    standard: z.ZodOptional<z.ZodEnum<["nema8", "nema17", "nema23"]>>;
+    model: z.ZodOptional<z.ZodString>;
+    shaftFacingDirection: z.ZodDefault<z.ZodEnum<["x+", "x-", "y+", "y-", "z+", "z-"]>>;
+}, "strip", z.ZodTypeAny, {
+    name: string;
+    shaftFacingDirection: "x+" | "x-" | "y+" | "y-" | "z+" | "z-";
+    displayName?: string | undefined;
+    model?: string | undefined;
+    standard?: "nema8" | "nema17" | "nema23" | undefined;
+}, {
+    name: string;
+    displayName?: string | undefined;
+    model?: string | undefined;
+    standard?: "nema8" | "nema17" | "nema23" | undefined;
+    shaftFacingDirection?: "x+" | "x-" | "y+" | "y-" | "z+" | "z-" | undefined;
+}>, {
+    name: string;
+    shaftFacingDirection: "x+" | "x-" | "y+" | "y-" | "z+" | "z-";
+    displayName?: string | undefined;
+    model?: string | undefined;
+    standard?: "nema8" | "nema17" | "nema23" | undefined;
+}, {
+    name: string;
+    displayName?: string | undefined;
+    model?: string | undefined;
+    standard?: "nema8" | "nema17" | "nema23" | undefined;
+    shaftFacingDirection?: "x+" | "x-" | "y+" | "y-" | "z+" | "z-" | undefined;
+}>;
+type AssemblyMotorPropsInput = z.input<typeof assemblyMotorProps>;
+
+interface AssemblyScreenProps {
+    /** Stable product-level identity for the screen assembly. */
+    name: string;
+    /** Imported CAD model URL. Mutually exclusive with cadModel where supported. */
+    modelUrl?: string;
+    /** Modelprinter/footprinter string, trimmed; mutually exclusive with other model sources. */
+    model?: string;
+    /** Selector for the connector that the screen attaches to. */
+    connectsTo: string;
+    /**
+     * Outer width of the screen body, including its bezel but excluding the flex
+     * cable. When supplied, it must be provided together with `height`.
+     */
+    width?: Distance;
+    /**
+     * Outer height of the screen body, including its bezel but excluding the flex
+     * cable. When supplied, it must be provided together with `width`.
+     */
+    height?: Distance;
+    /**
+     * Advanced modelprinter string used to render the screen assembly. Required
+     * when `width`, `height`, `model`, and `modelUrl` are omitted.
+     */
+    cadModel?: string;
+}
+declare const assemblyScreenProps: z.ZodEffects<z.ZodObject<{
+    name: z.ZodEffects<z.ZodString, string, string>;
+    model: z.ZodOptional<z.ZodString>;
+    modelUrl: z.ZodOptional<z.ZodEffects<z.ZodType<string, z.ZodTypeDef, string>, string, string>>;
+    connectsTo: z.ZodEffects<z.ZodString, string, string>;
+    width: z.ZodOptional<z.ZodEffects<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, number, string | number>>;
+    height: z.ZodOptional<z.ZodEffects<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, number, string | number>>;
+    cadModel: z.ZodOptional<z.ZodEffects<z.ZodString, string, string>>;
+}, "strip", z.ZodTypeAny, {
+    name: string;
+    connectsTo: string;
+    width?: number | undefined;
+    height?: number | undefined;
+    model?: string | undefined;
+    modelUrl?: string | undefined;
+    cadModel?: string | undefined;
+}, {
+    name: string;
+    connectsTo: string;
+    width?: string | number | undefined;
+    height?: string | number | undefined;
+    model?: string | undefined;
+    modelUrl?: string | undefined;
+    cadModel?: string | undefined;
+}>, {
+    name: string;
+    connectsTo: string;
+    width?: number | undefined;
+    height?: number | undefined;
+    model?: string | undefined;
+    modelUrl?: string | undefined;
+    cadModel?: string | undefined;
+}, {
+    name: string;
+    connectsTo: string;
+    width?: string | number | undefined;
+    height?: string | number | undefined;
+    model?: string | undefined;
+    modelUrl?: string | undefined;
+    cadModel?: string | undefined;
+}>;
+type AssemblyScreenPropsInput = z.input<typeof assemblyScreenProps>;
+
 interface AssemblySubassemblyProps {
     /** Stable identity used by selectors from other assembly elements. */
     name: string;
@@ -9344,6 +9395,37 @@ declare const assemblyProps: {
         model?: string | undefined;
         modelUrl?: string | undefined;
     }>;
+    readonly motor: zod.ZodEffects<zod.ZodObject<{
+        name: zod.ZodEffects<zod.ZodString, string, string>;
+        displayName: zod.ZodOptional<zod.ZodString>;
+        standard: zod.ZodOptional<zod.ZodEnum<["nema8", "nema17", "nema23"]>>;
+        model: zod.ZodOptional<zod.ZodString>;
+        shaftFacingDirection: zod.ZodDefault<zod.ZodEnum<["x+", "x-", "y+", "y-", "z+", "z-"]>>;
+    }, "strip", zod.ZodTypeAny, {
+        name: string;
+        shaftFacingDirection: "x+" | "x-" | "y+" | "y-" | "z+" | "z-";
+        displayName?: string | undefined;
+        model?: string | undefined;
+        standard?: "nema8" | "nema17" | "nema23" | undefined;
+    }, {
+        name: string;
+        displayName?: string | undefined;
+        model?: string | undefined;
+        standard?: "nema8" | "nema17" | "nema23" | undefined;
+        shaftFacingDirection?: "x+" | "x-" | "y+" | "y-" | "z+" | "z-" | undefined;
+    }>, {
+        name: string;
+        shaftFacingDirection: "x+" | "x-" | "y+" | "y-" | "z+" | "z-";
+        displayName?: string | undefined;
+        model?: string | undefined;
+        standard?: "nema8" | "nema17" | "nema23" | undefined;
+    }, {
+        name: string;
+        displayName?: string | undefined;
+        model?: string | undefined;
+        standard?: "nema8" | "nema17" | "nema23" | undefined;
+        shaftFacingDirection?: "x+" | "x-" | "y+" | "y-" | "z+" | "z-" | undefined;
+    }>;
     readonly screen: zod.ZodEffects<zod.ZodObject<{
         name: zod.ZodEffects<zod.ZodString, string, string>;
         model: zod.ZodOptional<zod.ZodString>;
@@ -40269,6 +40351,17 @@ declare const boardOutlinePoint: z.ZodEffects<z.ZodObject<{
 }>;
 interface BoardProps extends Omit<SubcircuitGroupProps, "subcircuit" | "connections" | "outline"> {
     title?: string;
+    /**
+     * Assembly mounting target, such as "NEMA17.backface". Trimmed; omitted
+     * leaves the board unattached. The target face is resolved by the consumer.
+     */
+    mountedTo?: string;
+    /**
+     * Nonnegative finite clearance between the target mounting face and the
+     * nearest PCB surface, in millimeters or a unit string. Parsed to mm.
+     * Omitted leaves the gap unset; only meaningful when mountedTo is supplied.
+     */
+    mountGap?: Distance;
     /** Fabricator preset, preserved as supplied. Omitted leaves the preset unset. */
     fabricatorPreset?: "jlcpcb_economy" | "jlcpcb_standard" | "jlcpcb_economy_20260912" | "jlcpcb_standard_20260912";
     material?: "fr4" | "fr1" | "flex";
@@ -41087,6 +41180,8 @@ declare const boardProps: z.ZodObject<{
     schPack: z.ZodOptional<z.ZodBoolean>;
     schMatchAdapt: z.ZodOptional<z.ZodBoolean>;
 } & {
+    mountedTo: z.ZodOptional<z.ZodString>;
+    mountGap: z.ZodOptional<z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>>;
     fabricatorPreset: z.ZodOptional<z.ZodEnum<["jlcpcb_economy", "jlcpcb_standard", "jlcpcb_economy_20260912", "jlcpcb_standard_20260912"]>>;
     material: z.ZodDefault<z.ZodEnum<["fr4", "fr1", "flex"]>>;
     layers: z.ZodDefault<z.ZodUnion<[z.ZodLiteral<1>, z.ZodLiteral<2>, z.ZodLiteral<4>, z.ZodLiteral<6>, z.ZodLiteral<8>, z.ZodLiteral<10>]>>;
@@ -41488,6 +41583,8 @@ declare const boardProps: z.ZodObject<{
     schPack?: boolean | undefined;
     schMatchAdapt?: boolean | undefined;
     title?: string | undefined;
+    mountedTo?: string | undefined;
+    mountGap?: number | undefined;
     fabricatorPreset?: "jlcpcb_economy" | "jlcpcb_standard" | "jlcpcb_economy_20260912" | "jlcpcb_standard_20260912" | undefined;
     routeRemaining?: boolean | undefined;
     defaultViaTenting?: "top_and_bottom_tented" | "top_tented" | "bottom_tented" | "exposed" | undefined;
@@ -41838,6 +41935,8 @@ declare const boardProps: z.ZodObject<{
     schPack?: boolean | undefined;
     schMatchAdapt?: boolean | undefined;
     title?: string | undefined;
+    mountedTo?: string | undefined;
+    mountGap?: string | number | undefined;
     fabricatorPreset?: "jlcpcb_economy" | "jlcpcb_standard" | "jlcpcb_economy_20260912" | "jlcpcb_standard_20260912" | undefined;
     material?: "flex" | "fr4" | "fr1" | undefined;
     allowBlindAndBuriedVias?: boolean | undefined;
@@ -41864,7 +41963,7 @@ declare const boardProps: z.ZodObject<{
     schematicDisabled?: boolean | undefined;
 }>;
 
-/** A bend on a flat flex PCB. Does not change fabrication coordinates. */
+/** A bend on a flat flex PCB, with optional tear-relief cutouts. */
 interface PcbBendProps {
     name?: string;
     /** Start/end of the bend-zone centerline in the parent PCB coordinate system. */
@@ -41876,6 +41975,14 @@ interface PcbBendProps {
     bendAngle: number | string;
     /** Positive neutral-surface radius, in mm or a distance string. */
     bendRadius: Distance;
+    /**
+     * Radius of circular tear-relief cutouts centered at both bend endpoints in
+     * the flat PCB. Removes material to round the edge where each cutout meets
+     * the board outline. Finite and positive, in mm or a distance string;
+     * parsed to mm. Omit to leave the outline unchanged (no tear reliefs).
+     * Independent of bendRadius and bendSide; no aliases or conflicting props.
+     */
+    tearReliefRadius?: Distance;
     /** Moving side, looking from (x1, y1) toward (x2, y2) in the flat layout. */
     bendSide: "left" | "right";
 }
@@ -41887,6 +41994,7 @@ declare const pcbBendProps: z.ZodEffects<z.ZodObject<{
     y2: z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>;
     bendAngle: z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>;
     bendRadius: z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>;
+    tearReliefRadius: z.ZodOptional<z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>>;
     bendSide: z.ZodEnum<["left", "right"]>;
 }, "strip", z.ZodTypeAny, {
     x1: number;
@@ -41897,6 +42005,7 @@ declare const pcbBendProps: z.ZodEffects<z.ZodObject<{
     bendRadius: number;
     bendSide: "left" | "right";
     name?: string | undefined;
+    tearReliefRadius?: number | undefined;
 }, {
     x1: string | number;
     y1: string | number;
@@ -41906,6 +42015,7 @@ declare const pcbBendProps: z.ZodEffects<z.ZodObject<{
     bendRadius: string | number;
     bendSide: "left" | "right";
     name?: string | undefined;
+    tearReliefRadius?: string | number | undefined;
 }>, {
     x1: number;
     y1: number;
@@ -41915,6 +42025,7 @@ declare const pcbBendProps: z.ZodEffects<z.ZodObject<{
     bendRadius: number;
     bendSide: "left" | "right";
     name?: string | undefined;
+    tearReliefRadius?: number | undefined;
 }, {
     x1: string | number;
     y1: string | number;
@@ -41924,6 +42035,7 @@ declare const pcbBendProps: z.ZodEffects<z.ZodObject<{
     bendRadius: string | number;
     bendSide: "left" | "right";
     name?: string | undefined;
+    tearReliefRadius?: string | number | undefined;
 }>;
 type PcbBendPropsInput = z.input<typeof pcbBendProps>;
 
@@ -80417,6 +80529,7 @@ declare const connectorProps: z.ZodObject<{
         stepUrl?: string | undefined;
     } | react.ReactElement<any, string | react.JSXElementConstructor<any>> | null | undefined;
     children?: any;
+    standard?: "usb_c" | "m2" | "jst_sh" | "jst_gh" | "jst_zh" | "jst_ph" | "jst_xh" | "jst_vh" | undefined;
     layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     symbolName?: string | undefined;
     pcbX?: string | number | undefined;
@@ -80881,7 +80994,6 @@ declare const connectorProps: z.ZodObject<{
     spiceModel?: SpiceModelElement | undefined;
     internalCircuit?: InternalCircuitElement | undefined;
     pinCount?: number | undefined;
-    standard?: "usb_c" | "m2" | "jst_sh" | "jst_gh" | "jst_zh" | "jst_ph" | "jst_xh" | "jst_vh" | undefined;
 }, {
     name: string;
     symbol?: SymbolProp | undefined;
@@ -81170,6 +81282,7 @@ declare const connectorProps: z.ZodObject<{
         stepUrl?: string | undefined;
     } | react.ReactElement<any, string | react.JSXElementConstructor<any>> | null | undefined;
     children?: any;
+    standard?: "usb_c" | "m2" | "jst_sh" | "jst_gh" | "jst_zh" | "jst_ph" | "jst_xh" | "jst_vh" | undefined;
     layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     } | undefined;
@@ -81637,7 +81750,6 @@ declare const connectorProps: z.ZodObject<{
     spiceModel?: SpiceModelElement | undefined;
     internalCircuit?: InternalCircuitElement | undefined;
     pinCount?: number | undefined;
-    standard?: "usb_c" | "m2" | "jst_sh" | "jst_gh" | "jst_zh" | "jst_ph" | "jst_xh" | "jst_vh" | undefined;
 }>;
 
 interface InterconnectProps extends CommonComponentProps {
@@ -85848,6 +85960,7 @@ declare const interconnectProps: z.ZodObject<{
         stepUrl?: string | undefined;
     } | react.ReactElement<any, string | react.JSXElementConstructor<any>> | null | undefined;
     children?: any;
+    standard?: "0603" | "0805" | "1206" | "TSC0001_36P_XALT_2025_11" | undefined;
     layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     symbolName?: string | undefined;
     pcbX?: string | number | undefined;
@@ -86234,7 +86347,6 @@ declare const interconnectProps: z.ZodObject<{
     schSheetName?: string | undefined;
     pinLabels?: Record<string | number, string | string[]> | undefined;
     internallyConnectedPins?: (string | number)[][] | undefined;
-    standard?: "0603" | "0805" | "1206" | "TSC0001_36P_XALT_2025_11" | undefined;
 }, {
     name: string;
     symbol?: SymbolProp | undefined;
@@ -86523,6 +86635,7 @@ declare const interconnectProps: z.ZodObject<{
         stepUrl?: string | undefined;
     } | react.ReactElement<any, string | react.JSXElementConstructor<any>> | null | undefined;
     children?: any;
+    standard?: "0603" | "0805" | "1206" | "TSC0001_36P_XALT_2025_11" | undefined;
     layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     } | undefined;
@@ -86911,7 +87024,6 @@ declare const interconnectProps: z.ZodObject<{
     schSheetName?: string | undefined;
     pinLabels?: Record<string | number, string | string[]> | undefined;
     internallyConnectedPins?: (string | number)[][] | undefined;
-    standard?: "0603" | "0805" | "1206" | "TSC0001_36P_XALT_2025_11" | undefined;
 }>;
 
 /**
@@ -116045,6 +116157,8 @@ declare const stampboardProps: z.ZodObject<{
     schPack: z.ZodOptional<z.ZodBoolean>;
     schMatchAdapt: z.ZodOptional<z.ZodBoolean>;
 } & {
+    mountedTo: z.ZodOptional<z.ZodString>;
+    mountGap: z.ZodOptional<z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>>;
     fabricatorPreset: z.ZodOptional<z.ZodEnum<["jlcpcb_economy", "jlcpcb_standard", "jlcpcb_economy_20260912", "jlcpcb_standard_20260912"]>>;
     material: z.ZodDefault<z.ZodEnum<["fr4", "fr1", "flex"]>>;
     layers: z.ZodDefault<z.ZodUnion<[z.ZodLiteral<1>, z.ZodLiteral<2>, z.ZodLiteral<4>, z.ZodLiteral<6>, z.ZodLiteral<8>, z.ZodLiteral<10>]>>;
@@ -116461,6 +116575,8 @@ declare const stampboardProps: z.ZodObject<{
     schPack?: boolean | undefined;
     schMatchAdapt?: boolean | undefined;
     title?: string | undefined;
+    mountedTo?: string | undefined;
+    mountGap?: number | undefined;
     fabricatorPreset?: "jlcpcb_economy" | "jlcpcb_standard" | "jlcpcb_economy_20260912" | "jlcpcb_standard_20260912" | undefined;
     routeRemaining?: boolean | undefined;
     defaultViaTenting?: "top_and_bottom_tented" | "top_tented" | "bottom_tented" | "exposed" | undefined;
@@ -116821,6 +116937,8 @@ declare const stampboardProps: z.ZodObject<{
     schPack?: boolean | undefined;
     schMatchAdapt?: boolean | undefined;
     title?: string | undefined;
+    mountedTo?: string | undefined;
+    mountGap?: string | number | undefined;
     fabricatorPreset?: "jlcpcb_economy" | "jlcpcb_standard" | "jlcpcb_economy_20260912" | "jlcpcb_standard_20260912" | undefined;
     material?: "flex" | "fr4" | "fr1" | undefined;
     allowBlindAndBuriedVias?: boolean | undefined;
@@ -142557,6 +142675,7 @@ declare const batteryProps: z.ZodObject<{
         stepUrl?: string | undefined;
     } | react.ReactElement<any, string | react.JSXElementConstructor<any>> | null | undefined;
     children?: any;
+    standard?: "AA" | "AAA" | "9V" | "CR2032" | "18650" | "C" | undefined;
     layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     symbolName?: string | undefined;
     pcbX?: string | number | undefined;
@@ -142943,7 +143062,6 @@ declare const batteryProps: z.ZodObject<{
     schSheetName?: string | undefined;
     connections?: Partial<Record<"left" | "right" | "pin1" | "pin2" | "anode" | "pos" | "cathode" | "neg", string | readonly string[] | string[]>> | undefined;
     voltage?: number | undefined;
-    standard?: "AA" | "AAA" | "9V" | "CR2032" | "18650" | "C" | undefined;
     schOrientation?: "vertical" | "horizontal" | "pos_top" | "pos_bottom" | "pos_left" | "pos_right" | "neg_top" | "neg_bottom" | "neg_left" | "neg_right" | undefined;
     capacity?: number | undefined;
 }, {
@@ -143234,6 +143352,7 @@ declare const batteryProps: z.ZodObject<{
         stepUrl?: string | undefined;
     } | react.ReactElement<any, string | react.JSXElementConstructor<any>> | null | undefined;
     children?: any;
+    standard?: "AA" | "AAA" | "9V" | "CR2032" | "18650" | "C" | undefined;
     layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     } | undefined;
@@ -143622,7 +143741,6 @@ declare const batteryProps: z.ZodObject<{
     schSheetName?: string | undefined;
     connections?: Partial<Record<"left" | "right" | "pin1" | "pin2" | "anode" | "pos" | "cathode" | "neg", string | readonly string[] | string[]>> | undefined;
     voltage?: string | number | undefined;
-    standard?: "AA" | "AAA" | "9V" | "CR2032" | "18650" | "C" | undefined;
     schOrientation?: "vertical" | "horizontal" | "pos_top" | "pos_bottom" | "pos_left" | "pos_right" | "neg_top" | "neg_bottom" | "neg_left" | "neg_right" | undefined;
     capacity?: string | number | undefined;
 }>;
@@ -187674,6 +187792,7 @@ declare const diodeProps: z.ZodEffects<z.ZodEffects<z.ZodObject<{
         stepUrl?: string | undefined;
     } | react.ReactElement<any, string | react.JSXElementConstructor<any>> | null | undefined;
     children?: any;
+    standard?: boolean | undefined;
     layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     symbolName?: string | undefined;
     pcbX?: string | number | undefined;
@@ -188060,7 +188179,6 @@ declare const diodeProps: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     schSheetName?: string | undefined;
     connections?: Partial<Record<"pin1" | "pin2" | "anode" | "pos" | "cathode" | "neg", string | readonly string[] | string[]>> | undefined;
     pinLabels?: Partial<Record<"left" | "right" | "pin1" | "pin2" | "anode" | "pos" | "cathode" | "neg", string | readonly string[] | string[]>> | undefined;
-    standard?: boolean | undefined;
     schOrientation?: "vertical" | "horizontal" | "pos_top" | "pos_bottom" | "pos_left" | "pos_right" | "neg_top" | "neg_bottom" | "neg_left" | "neg_right" | undefined;
     schSize?: number | "default" | "xs" | "sm" | "md" | undefined;
     schottky?: boolean | undefined;
@@ -188356,6 +188474,7 @@ declare const diodeProps: z.ZodEffects<z.ZodEffects<z.ZodObject<{
         stepUrl?: string | undefined;
     } | react.ReactElement<any, string | react.JSXElementConstructor<any>> | null | undefined;
     children?: any;
+    standard?: boolean | undefined;
     layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     } | undefined;
@@ -188744,7 +188863,6 @@ declare const diodeProps: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     schSheetName?: string | undefined;
     connections?: Partial<Record<"pin1" | "pin2" | "anode" | "pos" | "cathode" | "neg", string | readonly string[] | string[]>> | undefined;
     pinLabels?: Partial<Record<"left" | "right" | "pin1" | "pin2" | "anode" | "pos" | "cathode" | "neg", string | readonly string[] | string[]>> | undefined;
-    standard?: boolean | undefined;
     schOrientation?: "vertical" | "horizontal" | "pos_top" | "pos_bottom" | "pos_left" | "pos_right" | "neg_top" | "neg_bottom" | "neg_left" | "neg_right" | undefined;
     schSize?: string | number | undefined;
     schottky?: boolean | undefined;
@@ -189042,6 +189160,7 @@ declare const diodeProps: z.ZodEffects<z.ZodEffects<z.ZodObject<{
         stepUrl?: string | undefined;
     } | react.ReactElement<any, string | react.JSXElementConstructor<any>> | null | undefined;
     children?: any;
+    standard?: boolean | undefined;
     layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     symbolName?: string | undefined;
     pcbX?: string | number | undefined;
@@ -189428,7 +189547,6 @@ declare const diodeProps: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     schSheetName?: string | undefined;
     connections?: Partial<Record<"pin1" | "pin2" | "anode" | "pos" | "cathode" | "neg", string | readonly string[] | string[]>> | undefined;
     pinLabels?: Partial<Record<"left" | "right" | "pin1" | "pin2" | "anode" | "pos" | "cathode" | "neg", string | readonly string[] | string[]>> | undefined;
-    standard?: boolean | undefined;
     schOrientation?: "vertical" | "horizontal" | "pos_top" | "pos_bottom" | "pos_left" | "pos_right" | "neg_top" | "neg_bottom" | "neg_left" | "neg_right" | undefined;
     schSize?: number | "default" | "xs" | "sm" | "md" | undefined;
     schottky?: boolean | undefined;
@@ -189724,6 +189842,7 @@ declare const diodeProps: z.ZodEffects<z.ZodEffects<z.ZodObject<{
         stepUrl?: string | undefined;
     } | react.ReactElement<any, string | react.JSXElementConstructor<any>> | null | undefined;
     children?: any;
+    standard?: boolean | undefined;
     layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     } | undefined;
@@ -190112,7 +190231,6 @@ declare const diodeProps: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     schSheetName?: string | undefined;
     connections?: Partial<Record<"pin1" | "pin2" | "anode" | "pos" | "cathode" | "neg", string | readonly string[] | string[]>> | undefined;
     pinLabels?: Partial<Record<"left" | "right" | "pin1" | "pin2" | "anode" | "pos" | "cathode" | "neg", string | readonly string[] | string[]>> | undefined;
-    standard?: boolean | undefined;
     schOrientation?: "vertical" | "horizontal" | "pos_top" | "pos_bottom" | "pos_left" | "pos_right" | "neg_top" | "neg_bottom" | "neg_left" | "neg_right" | undefined;
     schSize?: string | number | undefined;
     schottky?: boolean | undefined;
@@ -191092,6 +191210,7 @@ declare const diodeProps: z.ZodEffects<z.ZodEffects<z.ZodObject<{
         stepUrl?: string | undefined;
     } | react.ReactElement<any, string | react.JSXElementConstructor<any>> | null | undefined;
     children?: any;
+    standard?: boolean | undefined;
     layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     } | undefined;
@@ -191480,7 +191599,6 @@ declare const diodeProps: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     schSheetName?: string | undefined;
     connections?: Partial<Record<"pin1" | "pin2" | "anode" | "pos" | "cathode" | "neg", string | readonly string[] | string[]>> | undefined;
     pinLabels?: Partial<Record<"left" | "right" | "pin1" | "pin2" | "anode" | "pos" | "cathode" | "neg", string | readonly string[] | string[]>> | undefined;
-    standard?: boolean | undefined;
     schOrientation?: "vertical" | "horizontal" | "pos_top" | "pos_bottom" | "pos_left" | "pos_right" | "neg_top" | "neg_bottom" | "neg_left" | "neg_right" | undefined;
     schSize?: string | number | undefined;
     schottky?: boolean | undefined;
@@ -242078,4 +242196,4 @@ interface ProjectConfig extends Pick<PlatformConfig, "projectName" | "projectBas
 }
 declare const projectConfig: z.ZodType<ProjectConfig>;
 
-export { type AmmeterPinLabels, type AmmeterProps, type AnalogAcSweepSimulationProps, type AnalogAnalysisSimulationBaseProps, type AnalogCapacitanceSweepParameterProps, type AnalogCurrentSweepParameterProps, type AnalogDcOperatingPointSimulationProps, type AnalogDcSweepSimulationProps, type AnalogInductanceSweepParameterProps, type AnalogResistanceSweepParameterProps, type AnalogSimulationProps, type AnalogSweepParameterProps, type AnalogTransientSimulationProps, type AnalogVoltageSweepParameterProps, type AntennaFrequencyBand, type AntennaProps, type AntennaShape, type AssemblySubassemblyProps as AssemblyCadAssemblyProps, type AssemblySubassemblyPropsInput as AssemblyCadAssemblyPropsInput, type AssemblyDeviceProps, type AssemblyDevicePropsInput, type AssemblyScreenProps, type AssemblyScreenPropsInput, type AssemblySubassemblyProps, type AssemblySubassemblyPropsInput, type AutocompleteString, type AutorouterConfig, type AutorouterDefinition, type AutorouterInstance, type AutorouterPreset, type AutorouterProp, type AutorouterVersion, type AutoroutingPhaseProps, type BaseGroupProps, type BaseManualEditEvent, type BaseManualEditEventInput, type BasicFootprint, type BatteryPinLabels, type BatteryProps, type BoardColor, type BoardColorPreset, type BoardOutlinePoint, type BoardProps, type Border, type BreakoutPointProps, type BreakoutProps, type BusFanoutDirection, type BusFanoutDirectionLiteral, type BusName, type BusProps, type CadAssemblyProps, type CadAssemblyPropsInput, type CadModelAxisDirection, type CadModelBase, type CadModelFootprinterString, type CadModelGlb, type CadModelGltf, type CadModelJscad, type CadModelObj, type CadModelProp, type CadModelProps, type CadModelPropsInput, type CadModelStep, type CadModelStl, type CadModelWrl, type CanonicalBusFanoutDirection, type CapacitorPinLabels, type CapacitorProps, type ChipConnections, type ChipPinLabels, type ChipProps, type ChipPropsSU, type CircleCutoutProps, type CircleEnclosureCutoutApertureProps, type CircleHoleProps, type CirclePlatedHoleProps, type CircleShapeProps, type CircleSmtPadProps, type CircleSolderPasteProps, type CircuitJson, type CircularHoleWithRectPlatedProps, type CommonComponentProps, type CommonLayoutProps, type CommonShapeProps, type ComponentProps, type ConnectionTarget, type Connections, type ConnectorProps, type ConnectorStandard, type ConstrainedLayoutProps, type ConstraintProps, type CopperPourProps, type CopperPourPropsInput, type CopperTextProps, type CourtyardCircleProps, type CourtyardOutlineProps, type CourtyardPillProps, type CourtyardRectProps, type CrystalPinLabels, type CrystalProps, type CurrentSourcePinLabels, type CurrentSourceProps, type CustomDrcCheckContext, type CustomDrcCheckFn, type CustomDrcCheckInput, type CustomDrcConnectable, type CustomDrcSelect, type CustomDrcSelectAll, type CutoutApertureProps, type CutoutProps, type CutoutPropsInput, type DifferentialPairProps, type DiodePinLabels, type DiodePinLabelsProp, type DiodeProps, type Direction, type DirectionAlongEdge, type DirectionalFanoutBoundaryPadding, type DrcCheckProps, type EditPcbComponentLocationEvent, type EditPcbComponentLocationEventInput, type EditPcbGroupLocationEvent, type EditPcbGroupLocationEventInput, type EditSchematicComponentLocationEvent, type EditSchematicComponentLocationEventInput, type EditSchematicGroupLocationEvent, type EditSchematicGroupLocationEventInput, type EditTraceHintEvent, type EditTraceHintEventInput, type EnclosureCutoutApertureProps, type EnclosureCutoutApertureShape, type EnclosureFdmBoxProps, type EnclosureFdmBoxPropsInput, type FabricationNoteDimensionProps, type FabricationNoteDimensionPropsInput, type FabricationNotePathProps, type FabricationNoteRectProps, type FabricationNoteTextProps, type FabricationNoteTextPropsInput, type FabricatorDrcCheckParams, type FabricatorEngine, type FanoutBoundaryPadding, type FanoutPourNetMap, type FanoutProps, type FanoutTracePath, type FiducialProps, type FootprintFileParserEntry, type FootprintInsertionDirection, type FootprintLibraryResult, type FootprintProp, type FootprintProps, type FootprintPropsInput, type FootprintSoupElements, type FootprinterAutocompleteString, type FootprinterStringExample, type FusePinLabels, type FuseProps, type GroupProps, type HoleProps, type HoleWithPolygonPadPlatedHoleProps, type ImplicitBreakoutBounds, type ImplicitBreakoutBus, type ImplicitBreakoutConnection, type ImplicitBreakoutConnectionEndpoint, type ImplicitBreakoutConnectionOrDifferentialPair, type ImplicitBreakoutDifferentialPair, type ImplicitBreakoutEdge, type ImplicitBreakoutPoint, type ImplicitBreakoutPointSolverFn, type ImplicitBreakoutPointSolverInput, type ImplicitBreakoutPointSolverOutput, type ImplicitBreakoutRegion, type ImplicitBreakoutSolverPoint, type InductorPinLabels, type InductorProps, type InferredChipProps, type InferredConstrainedLayoutProps, type InferredDiodeProps, type InferredFuseProps, type InferredHoleProps, type InferredSchematicArcProps, type InferredSchematicBoxProps, type InferredSchematicCircleProps, type InferredSchematicGraphicProps, type InferredSchematicLineProps, type InferredSchematicPathProps, type InferredSchematicRectProps, type InferredSchematicSectionProps, type InferredSchematicSheetProps, type InferredSchematicSymbolProps, type InferredSchematicTextProps, type InferredSmtPadProps, type InferredSolderPasteProps, type InferredSwitchProps, type InferredTestpointProps, type InferredViaProps, type InterconnectProps, type InternalCircuitElement, type InternalCircuitProps, type JlcpcbAutocompleteStringPath, type JlcpcbKnownPartNumber, type JumperProps, type KicadAt, type KicadAutocompleteStringPath, type KicadEffects, type KicadFont, type KicadFootprintAttributes, type KicadFootprintMetadata, type KicadFootprintModel, type KicadFootprintPad, type KicadFootprintProperties, type KicadPath, type KicadPinElectricalType, type KicadPinGraphicStyle, type KicadPinMetadata, type KicadProperty, type KicadSymbolEffects, type KicadSymbolMetadata, type KicadSymbolPinNames, type KicadSymbolPinNumbers, type KicadSymbolProperties, type KicadSymbolProperty, type LayoutConfig, type LedPinLabels, type LedProps, type LegacyBusFanoutDirection, type LocalCacheEngine, type ManualEditEvent, type ManualEditEventInput, type ManualEditsFile, type ManualEditsFileInput, type ManualPcbPlacement, type ManualPcbPlacementInput, type ManualSchematicPlacement, type ManualSchematicPlacementInput, type ManualTraceHint, type ManualTraceHintInput, type MosfetPinLabels, type MosfetProps, type MountedBoardProps, type NetAliasProps, type NetLabelProps, type NetProps, type NinePointAnchor, type NonSubcircuitGroupProps, type OpAmpPinLabels, type OpAmpProps, type OvalHoleProps, type OvalPlatedHoleProps, type PanelProps, type ParsedEnclosureCutoutApertureProps, type PartsEngine, type PcbBendProps, type PcbBendPropsInput, type PcbKeepoutProps, type PcbLayoutProps, type PcbNoteDimensionProps, type PcbNoteDimensionPropsInput, type PcbNoteLineProps, type PcbNoteLinePropsInput, type PcbNotePathProps, type PcbNotePathPropsInput, type PcbNoteRectProps, type PcbNoteRectPropsInput, type PcbNoteTextProps, type PcbNoteTextPropsInput, type PcbPath, type PcbPathPoint, type PcbPositionMode, type PcbRouteCache, type PcbSameXConstraint, type PcbSameYConstraint, type PcbSoldermaskOpeningProps, type PcbSoldermaskOpeningPropsInput, type PcbStiffenerProps, type PcbStiffenerPropsInput, type PcbStyle, type PcbSx, type PcbSxSelector, type PcbSxValue, type PcbTraceProps, type PcbXDistConstraint, type PcbYDistConstraint, type PillEnclosureCutoutApertureProps, type PillHoleProps, type PillPlatedHoleProps, type PillShapeProps, type PillSmtPadProps, type PillWithRectPadPlatedHoleProps, type PinAttributeMap, type PinCapability, type PinCompatibleVariant, type PinHeaderProps, type PinLabelFromPinLabelMap, type PinLabelsProp, type PinSideDefinition, type PinSideDefinitionInput, type PinVariant, type PinoutProps, type PlatedHoleProps, type PlatformConfig, type PolygonCutoutProps, type PolygonSmtPadProps, type PortHints, type PortProps, type PositionMode, type PotentiometerPinLabels, type PotentiometerPinVariant, type PotentiometerProps, type PowerSourceProps, type PreflightRoutingCheckPolicy, type ProjectConfig, type PushButtonProps, type RectCutoutProps, type RectEnclosureCutoutApertureProps, type RectHoleProps, type RectShapeProps, type RectSmtPadProps, type RectSolderPasteProps, type ResistorPinLabels, type ResistorProps, type ResonatorPinVariant, type ResonatorProps, type RotatedPillSmtPadProps, type RotatedRectSmtPadProps, type RoutingTolerances, type SchStyle, type SchematicArcProps, type SchematicBoxProps, type SchematicCellProps, type SchematicCircleProps, type SchematicGraphicProps, type SchematicLineProps, type SchematicOrientation, type SchematicPathProps, type SchematicPinArrangement, type SchematicPinArrangementWithPinCounts, type SchematicPinArrangementWithSides, type SchematicPinArrangementWithSizes, type SchematicPinLabel, type SchematicPinStyle, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicRectProps, type SchematicRowProps, type SchematicSectionProps, type SchematicSheetProps, type SchematicSheetSize, type SchematicSymbolProps, type SchematicSymbolSize, type SchematicTableProps, type SchematicTextProps, type SelectionResult, type SelectionResultComponent, type SelectionResultNet, type SelectionResultPort, type Selectors, type SilkscreenCircleProps, type SilkscreenGraphicProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SimpleRouteJson, type SmtPadProps, type SolderJumperProps, type SolderPasteProps, type SpiceEngine, type SpiceEngineSimulationResult, type SpiceModelElement, type SpiceModelProps, type SpiceOptions, type StampboardProps, type SubcircuitGroupProps, type SubcircuitGroupPropsWithBool, type SubcircuitProps, type SubpanelProps, type SupplierName, type SupplierPartNumbers, type SupplierProps, type SwitchProps, type SymbolProp, type SymbolProps, type SymbolPropsInput, type TestpointConnections, type TestpointPinLabels, type TestpointProps, type ToolingrailProps, type TraceHintProps, type TraceProps, type TransistorPinLabels, type TransistorProps, type ViaProps, type VoltageProbeProps, type VoltageSourcePinLabels, type VoltageSourceProps, type WaveShape, ammeterPinLabels, ammeterPins, ammeterProps, analogAcSweepSimulationProps, analogAnalysisSimulationBaseProps, analogCapacitanceSweepParameterProps, analogCurrentSweepParameterProps, analogDcOperatingPointSimulationProps, analogDcSweepSimulationProps, analogInductanceSweepParameterProps, analogResistanceSweepParameterProps, analogSimulationProps, analogSweepParameterProps, analogTransientSimulationProps, analogVoltageSweepParameterProps, antennaFrequencyBand, antennaFrequencyBands, antennaProps, antennaShape, antennaShapes, assemblyCadAssemblyProps, assemblyDeviceProps, assemblyProps, assemblyScreenProps, assemblySubassemblyProps, autorouterConfig, autorouterEffortLevel, autorouterPreset, autorouterProp, autoroutingPhaseProps, baseGroupProps, base_manual_edit_event, batteryPins, batteryProps, boardOutlinePoint, boardProps, border, breakoutPointProps, breakoutProps, bugProps, busFanoutDirection, busProps, cadModelAxisDirection, cadModelAxisDirections, cadModelBase, cadModelGlb, cadModelGltf, cadModelJscad, cadModelObj, cadModelProp, cadModelStep, cadModelStl, cadModelWrl, cadassemblyProps, cadmodelProps, canonicalBusFanoutDirection, canonicalBusFanoutDirectionValues, capacitorPinLabels, capacitorPins, capacitorProps, chipProps, circleCutoutProps, circleShapeProps, circleSmtPadProps, circleSolderPasteProps, commonComponentProps, commonLayoutProps, commonShapeProps, componentProps, connectorProps, connectorStandard, constrainedLayoutProps, constraintProps, copperPourProps, copperTextProps, courtyardCircleProps, courtyardOutlineProps, courtyardPillProps, courtyardRectProps, crystalPins, crystalProps, currentSourcePinLabels, currentSourcePins, currentSourceProps, customDrcCheckFn, cutoutApertureBaseProps, cutoutProps, differentialPairProps, diodePinLabelsProp, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, drcCheckProps, edit_component_location_event, edit_pcb_component_location_event, edit_pcb_group_location_event, edit_schematic_component_location_event, edit_schematic_group_location_event, edit_trace_hint_event, enclosureCutoutApertureProps, enclosureCutoutApertureShapes, enclosureFdmBoxProps, enclosureProps, explicitPinSideDefinition, fabricationNoteDimensionProps, fabricationNotePathProps, fabricationNoteRectProps, fabricationNoteTextProps, fabricatorEngine, fanoutBoundaryPadding, fanoutProps, fanoutTracePath, fiducialProps, footprintInsertionDirection, footprintProp, footprintProps, footprinterStringExamples, fusePinLabels, fuseProps, groupProps, holeProps, inductorPins, inductorProps, interconnectProps, internalCircuitProps, jumperProps, kicadAt, kicadEffects, kicadFont, kicadFootprintAttributes, kicadFootprintKeys, kicadFootprintMetadata, kicadFootprintModel, kicadFootprintPad, kicadFootprintProperties, kicadFootprintStrings, kicadPinElectricalType, kicadPinGraphicStyle, kicadPinMetadata, kicadProperty, kicadSymbolEffects, kicadSymbolMetadata, kicadSymbolPinNames, kicadSymbolPinNumbers, kicadSymbolProperties, kicadSymbolProperty, layoutConfig, ledPins, ledProps, lrPins, lrPolarPins, manual_edit_event, manual_edits_file, manual_pcb_placement, manual_schematic_placement, manual_trace_hint, mosfetPins, mosfetProps, mountedboardProps, netAliasProps, netLabelProps, netProps, ninePointAnchor, noConnectProp, opampPinLabels, opampPins, opampProps, panelProps, partsEngine, pcbBendProps, pcbKeepoutProps, pcbLayoutProps, pcbNoteDimensionProps, pcbNoteLineProps, pcbNotePathProps, pcbNoteRectProps, pcbNoteTextProps, pcbPath, pcbPathPoint, pcbSameXConstraintProps, pcbSameYConstraintProps, pcbSoldermaskOpeningProps, pcbStiffenerProps, pcbStyle, pcbSx, pcbSxValue, pcbTraceProps, pcbXDistConstraintProps, pcbYDistConstraintProps, pillShapeProps, pillSmtPadProps, pinAttributeMap, pinCapability, pinCompatibleVariant, pinHeaderProps, pinLabelsProp, pinoutProps, platedHoleProps, platformConfig, point3, polygonCutoutProps, polygonSmtPadProps, portHints, portProps, portRef, potentiometerPinLabels, potentiometerProps, powerSourceProps, preflightRoutingCheckPolicy, projectConfig, pushButtonProps, rectCutoutProps, rectShapeProps, rectSmtPadProps, rectSolderPasteProps, resistorPinLabels, resistorPins, resistorProps, resonatorProps, rotatedPillSmtPadProps, rotatedRectSmtPadProps, rotationPoint3, routeHintPointProps, routingTolerances, schStyle, schematicArcProps, schematicBoxProps, schematicCellProps, schematicCircleProps, schematicGraphicProps, schematicLineProps, schematicOrientation, schematicPathProps, schematicPinArrangement, schematicPinLabel, schematicPinStyle, schematicPortArrangement, schematicRectProps, schematicRowProps, schematicSectionProps, schematicSheetProps, schematicSymbolProps, schematicSymbolSize, schematicTableProps, schematicTextProps, silkscreenCircleProps, silkscreenGraphicProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, solderPasteProps, solderjumperProps, spicemodelProps, stampboardProps, subcircuitGroupProps, subcircuitGroupPropsWithBool, subcircuitProps, subpanelProps, supplierProps, switchProps, symbolProp, symbolProps, testpointPins, testpointProps, toolingrailProps, traceHintProps, traceProps, transistorPins, transistorPinsLabels, transistorProps, viaProps, voltageProbeProps, voltageSourcePinLabels, voltageSourcePins, voltageSourceProps };
+export { type AmmeterPinLabels, type AmmeterProps, type AnalogAcSweepSimulationProps, type AnalogAnalysisSimulationBaseProps, type AnalogCapacitanceSweepParameterProps, type AnalogCurrentSweepParameterProps, type AnalogDcOperatingPointSimulationProps, type AnalogDcSweepSimulationProps, type AnalogInductanceSweepParameterProps, type AnalogResistanceSweepParameterProps, type AnalogSimulationProps, type AnalogSweepParameterProps, type AnalogTransientSimulationProps, type AnalogVoltageSweepParameterProps, type AntennaFrequencyBand, type AntennaProps, type AntennaShape, type AssemblySubassemblyProps as AssemblyCadAssemblyProps, type AssemblySubassemblyPropsInput as AssemblyCadAssemblyPropsInput, type AssemblyDeviceProps, type AssemblyDevicePropsInput, type AssemblyMotorProps, type AssemblyMotorPropsInput, type AssemblyMotorStandard, type AssemblyScreenProps, type AssemblyScreenPropsInput, type AssemblySubassemblyProps, type AssemblySubassemblyPropsInput, type AutocompleteString, type AutorouterConfig, type AutorouterDefinition, type AutorouterInstance, type AutorouterPreset, type AutorouterProp, type AutorouterVersion, type AutoroutingPhaseProps, type BaseGroupProps, type BaseManualEditEvent, type BaseManualEditEventInput, type BasicFootprint, type BatteryPinLabels, type BatteryProps, type BoardColor, type BoardColorPreset, type BoardOutlinePoint, type BoardProps, type Border, type BreakoutPointProps, type BreakoutProps, type BusFanoutDirection, type BusFanoutDirectionLiteral, type BusName, type BusProps, type CadAssemblyProps, type CadAssemblyPropsInput, type CadModelAxisDirection, type CadModelBase, type CadModelFootprinterString, type CadModelGlb, type CadModelGltf, type CadModelJscad, type CadModelObj, type CadModelProp, type CadModelProps, type CadModelPropsInput, type CadModelStep, type CadModelStl, type CadModelWrl, type CanonicalBusFanoutDirection, type CapacitorPinLabels, type CapacitorProps, type ChipConnections, type ChipPinLabels, type ChipProps, type ChipPropsSU, type CircleCutoutProps, type CircleEnclosureCutoutApertureProps, type CircleHoleProps, type CirclePlatedHoleProps, type CircleShapeProps, type CircleSmtPadProps, type CircleSolderPasteProps, type CircuitJson, type CircularHoleWithRectPlatedProps, type CommonComponentProps, type CommonLayoutProps, type CommonShapeProps, type ComponentProps, type ConnectionTarget, type Connections, type ConnectorProps, type ConnectorStandard, type ConstrainedLayoutProps, type ConstraintProps, type CopperPourProps, type CopperPourPropsInput, type CopperTextProps, type CourtyardCircleProps, type CourtyardOutlineProps, type CourtyardPillProps, type CourtyardRectProps, type CrystalPinLabels, type CrystalProps, type CurrentSourcePinLabels, type CurrentSourceProps, type CustomDrcCheckContext, type CustomDrcCheckFn, type CustomDrcCheckInput, type CustomDrcConnectable, type CustomDrcSelect, type CustomDrcSelectAll, type CutoutApertureProps, type CutoutProps, type CutoutPropsInput, type DifferentialPairProps, type DiodePinLabels, type DiodePinLabelsProp, type DiodeProps, type Direction, type DirectionAlongEdge, type DirectionalFanoutBoundaryPadding, type DrcCheckProps, type EditPcbComponentLocationEvent, type EditPcbComponentLocationEventInput, type EditPcbGroupLocationEvent, type EditPcbGroupLocationEventInput, type EditSchematicComponentLocationEvent, type EditSchematicComponentLocationEventInput, type EditSchematicGroupLocationEvent, type EditSchematicGroupLocationEventInput, type EditTraceHintEvent, type EditTraceHintEventInput, type EnclosureCutoutApertureProps, type EnclosureCutoutApertureShape, type EnclosureFdmBoxProps, type EnclosureFdmBoxPropsInput, type FabricationNoteDimensionProps, type FabricationNoteDimensionPropsInput, type FabricationNotePathProps, type FabricationNoteRectProps, type FabricationNoteTextProps, type FabricationNoteTextPropsInput, type FabricatorDrcCheckParams, type FabricatorEngine, type FanoutBoundaryPadding, type FanoutPourNetMap, type FanoutProps, type FanoutTracePath, type FiducialProps, type FootprintFileParserEntry, type FootprintInsertionDirection, type FootprintLibraryResult, type FootprintProp, type FootprintProps, type FootprintPropsInput, type FootprintSoupElements, type FootprinterAutocompleteString, type FootprinterStringExample, type FusePinLabels, type FuseProps, type GroupProps, type HoleProps, type HoleWithPolygonPadPlatedHoleProps, type ImplicitBreakoutBounds, type ImplicitBreakoutBus, type ImplicitBreakoutConnection, type ImplicitBreakoutConnectionEndpoint, type ImplicitBreakoutConnectionOrDifferentialPair, type ImplicitBreakoutDifferentialPair, type ImplicitBreakoutEdge, type ImplicitBreakoutPoint, type ImplicitBreakoutPointSolverFn, type ImplicitBreakoutPointSolverInput, type ImplicitBreakoutPointSolverOutput, type ImplicitBreakoutRegion, type ImplicitBreakoutSolverPoint, type InductorPinLabels, type InductorProps, type InferredChipProps, type InferredConstrainedLayoutProps, type InferredDiodeProps, type InferredFuseProps, type InferredHoleProps, type InferredSchematicArcProps, type InferredSchematicBoxProps, type InferredSchematicCircleProps, type InferredSchematicGraphicProps, type InferredSchematicLineProps, type InferredSchematicPathProps, type InferredSchematicRectProps, type InferredSchematicSectionProps, type InferredSchematicSheetProps, type InferredSchematicSymbolProps, type InferredSchematicTextProps, type InferredSmtPadProps, type InferredSolderPasteProps, type InferredSwitchProps, type InferredTestpointProps, type InferredViaProps, type InterconnectProps, type InternalCircuitElement, type InternalCircuitProps, type JlcpcbAutocompleteStringPath, type JlcpcbKnownPartNumber, type JumperProps, type KicadAt, type KicadAutocompleteStringPath, type KicadEffects, type KicadFont, type KicadFootprintAttributes, type KicadFootprintMetadata, type KicadFootprintModel, type KicadFootprintPad, type KicadFootprintProperties, type KicadPath, type KicadPinElectricalType, type KicadPinGraphicStyle, type KicadPinMetadata, type KicadProperty, type KicadSymbolEffects, type KicadSymbolMetadata, type KicadSymbolPinNames, type KicadSymbolPinNumbers, type KicadSymbolProperties, type KicadSymbolProperty, type LayoutConfig, type LedPinLabels, type LedProps, type LegacyBusFanoutDirection, type LocalCacheEngine, type ManualEditEvent, type ManualEditEventInput, type ManualEditsFile, type ManualEditsFileInput, type ManualPcbPlacement, type ManualPcbPlacementInput, type ManualSchematicPlacement, type ManualSchematicPlacementInput, type ManualTraceHint, type ManualTraceHintInput, type MosfetPinLabels, type MosfetProps, type MountedBoardProps, type NetAliasProps, type NetLabelProps, type NetProps, type NinePointAnchor, type NonSubcircuitGroupProps, type OpAmpPinLabels, type OpAmpProps, type OvalHoleProps, type OvalPlatedHoleProps, type PanelProps, type ParsedEnclosureCutoutApertureProps, type PartsEngine, type PcbBendProps, type PcbBendPropsInput, type PcbKeepoutProps, type PcbLayoutProps, type PcbNoteDimensionProps, type PcbNoteDimensionPropsInput, type PcbNoteLineProps, type PcbNoteLinePropsInput, type PcbNotePathProps, type PcbNotePathPropsInput, type PcbNoteRectProps, type PcbNoteRectPropsInput, type PcbNoteTextProps, type PcbNoteTextPropsInput, type PcbPath, type PcbPathPoint, type PcbPositionMode, type PcbRouteCache, type PcbSameXConstraint, type PcbSameYConstraint, type PcbSoldermaskOpeningProps, type PcbSoldermaskOpeningPropsInput, type PcbStiffenerProps, type PcbStiffenerPropsInput, type PcbStyle, type PcbSx, type PcbSxSelector, type PcbSxValue, type PcbTraceProps, type PcbXDistConstraint, type PcbYDistConstraint, type PillEnclosureCutoutApertureProps, type PillHoleProps, type PillPlatedHoleProps, type PillShapeProps, type PillSmtPadProps, type PillWithRectPadPlatedHoleProps, type PinAttributeMap, type PinCapability, type PinCompatibleVariant, type PinHeaderProps, type PinLabelFromPinLabelMap, type PinLabelsProp, type PinSideDefinition, type PinSideDefinitionInput, type PinVariant, type PinoutProps, type PlatedHoleProps, type PlatformConfig, type PolygonCutoutProps, type PolygonSmtPadProps, type PortHints, type PortProps, type PositionMode, type PotentiometerPinLabels, type PotentiometerPinVariant, type PotentiometerProps, type PowerSourceProps, type PreflightRoutingCheckPolicy, type ProjectConfig, type PushButtonProps, type RectCutoutProps, type RectEnclosureCutoutApertureProps, type RectHoleProps, type RectShapeProps, type RectSmtPadProps, type RectSolderPasteProps, type ResistorPinLabels, type ResistorProps, type ResonatorPinVariant, type ResonatorProps, type RotatedPillSmtPadProps, type RotatedRectSmtPadProps, type RoutingTolerances, type SchStyle, type SchematicArcProps, type SchematicBoxProps, type SchematicCellProps, type SchematicCircleProps, type SchematicGraphicProps, type SchematicLineProps, type SchematicOrientation, type SchematicPathProps, type SchematicPinArrangement, type SchematicPinArrangementWithPinCounts, type SchematicPinArrangementWithSides, type SchematicPinArrangementWithSizes, type SchematicPinLabel, type SchematicPinStyle, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicRectProps, type SchematicRowProps, type SchematicSectionProps, type SchematicSheetProps, type SchematicSheetSize, type SchematicSymbolProps, type SchematicSymbolSize, type SchematicTableProps, type SchematicTextProps, type SelectionResult, type SelectionResultComponent, type SelectionResultNet, type SelectionResultPort, type Selectors, type SilkscreenCircleProps, type SilkscreenGraphicProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SimpleRouteJson, type SmtPadProps, type SolderJumperProps, type SolderPasteProps, type SpiceEngine, type SpiceEngineSimulationResult, type SpiceModelElement, type SpiceModelProps, type SpiceOptions, type StampboardProps, type SubcircuitGroupProps, type SubcircuitGroupPropsWithBool, type SubcircuitProps, type SubpanelProps, type SupplierName, type SupplierPartNumbers, type SupplierProps, type SwitchProps, type SymbolProp, type SymbolProps, type SymbolPropsInput, type TestpointConnections, type TestpointPinLabels, type TestpointProps, type ToolingrailProps, type TraceHintProps, type TraceProps, type TransistorPinLabels, type TransistorProps, type ViaProps, type VoltageProbeProps, type VoltageSourcePinLabels, type VoltageSourceProps, type WaveShape, ammeterPinLabels, ammeterPins, ammeterProps, analogAcSweepSimulationProps, analogAnalysisSimulationBaseProps, analogCapacitanceSweepParameterProps, analogCurrentSweepParameterProps, analogDcOperatingPointSimulationProps, analogDcSweepSimulationProps, analogInductanceSweepParameterProps, analogResistanceSweepParameterProps, analogSimulationProps, analogSweepParameterProps, analogTransientSimulationProps, analogVoltageSweepParameterProps, antennaFrequencyBand, antennaFrequencyBands, antennaProps, antennaShape, antennaShapes, assemblyCadAssemblyProps, assemblyDeviceProps, assemblyMotorProps, assemblyProps, assemblyScreenProps, assemblySubassemblyProps, autorouterConfig, autorouterEffortLevel, autorouterPreset, autorouterProp, autoroutingPhaseProps, baseGroupProps, base_manual_edit_event, batteryPins, batteryProps, boardOutlinePoint, boardProps, border, breakoutPointProps, breakoutProps, bugProps, busFanoutDirection, busProps, cadModelAxisDirection, cadModelAxisDirections, cadModelBase, cadModelGlb, cadModelGltf, cadModelJscad, cadModelObj, cadModelProp, cadModelStep, cadModelStl, cadModelWrl, cadassemblyProps, cadmodelProps, canonicalBusFanoutDirection, canonicalBusFanoutDirectionValues, capacitorPinLabels, capacitorPins, capacitorProps, chipProps, circleCutoutProps, circleShapeProps, circleSmtPadProps, circleSolderPasteProps, commonComponentProps, commonLayoutProps, commonShapeProps, componentProps, connectorProps, connectorStandard, constrainedLayoutProps, constraintProps, copperPourProps, copperTextProps, courtyardCircleProps, courtyardOutlineProps, courtyardPillProps, courtyardRectProps, crystalPins, crystalProps, currentSourcePinLabels, currentSourcePins, currentSourceProps, customDrcCheckFn, cutoutApertureBaseProps, cutoutProps, differentialPairProps, diodePinLabelsProp, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, drcCheckProps, edit_component_location_event, edit_pcb_component_location_event, edit_pcb_group_location_event, edit_schematic_component_location_event, edit_schematic_group_location_event, edit_trace_hint_event, enclosureCutoutApertureProps, enclosureCutoutApertureShapes, enclosureFdmBoxProps, enclosureProps, explicitPinSideDefinition, fabricationNoteDimensionProps, fabricationNotePathProps, fabricationNoteRectProps, fabricationNoteTextProps, fabricatorEngine, fanoutBoundaryPadding, fanoutProps, fanoutTracePath, fiducialProps, footprintInsertionDirection, footprintProp, footprintProps, footprinterStringExamples, fusePinLabels, fuseProps, groupProps, holeProps, inductorPins, inductorProps, interconnectProps, internalCircuitProps, jumperProps, kicadAt, kicadEffects, kicadFont, kicadFootprintAttributes, kicadFootprintKeys, kicadFootprintMetadata, kicadFootprintModel, kicadFootprintPad, kicadFootprintProperties, kicadFootprintStrings, kicadPinElectricalType, kicadPinGraphicStyle, kicadPinMetadata, kicadProperty, kicadSymbolEffects, kicadSymbolMetadata, kicadSymbolPinNames, kicadSymbolPinNumbers, kicadSymbolProperties, kicadSymbolProperty, layoutConfig, ledPins, ledProps, lrPins, lrPolarPins, manual_edit_event, manual_edits_file, manual_pcb_placement, manual_schematic_placement, manual_trace_hint, mosfetPins, mosfetProps, mountedboardProps, netAliasProps, netLabelProps, netProps, ninePointAnchor, noConnectProp, opampPinLabels, opampPins, opampProps, panelProps, partsEngine, pcbBendProps, pcbKeepoutProps, pcbLayoutProps, pcbNoteDimensionProps, pcbNoteLineProps, pcbNotePathProps, pcbNoteRectProps, pcbNoteTextProps, pcbPath, pcbPathPoint, pcbSameXConstraintProps, pcbSameYConstraintProps, pcbSoldermaskOpeningProps, pcbStiffenerProps, pcbStyle, pcbSx, pcbSxValue, pcbTraceProps, pcbXDistConstraintProps, pcbYDistConstraintProps, pillShapeProps, pillSmtPadProps, pinAttributeMap, pinCapability, pinCompatibleVariant, pinHeaderProps, pinLabelsProp, pinoutProps, platedHoleProps, platformConfig, point3, polygonCutoutProps, polygonSmtPadProps, portHints, portProps, portRef, potentiometerPinLabels, potentiometerProps, powerSourceProps, preflightRoutingCheckPolicy, projectConfig, pushButtonProps, rectCutoutProps, rectShapeProps, rectSmtPadProps, rectSolderPasteProps, resistorPinLabels, resistorPins, resistorProps, resonatorProps, rotatedPillSmtPadProps, rotatedRectSmtPadProps, rotationPoint3, routeHintPointProps, routingTolerances, schStyle, schematicArcProps, schematicBoxProps, schematicCellProps, schematicCircleProps, schematicGraphicProps, schematicLineProps, schematicOrientation, schematicPathProps, schematicPinArrangement, schematicPinLabel, schematicPinStyle, schematicPortArrangement, schematicRectProps, schematicRowProps, schematicSectionProps, schematicSheetProps, schematicSymbolProps, schematicSymbolSize, schematicTableProps, schematicTextProps, silkscreenCircleProps, silkscreenGraphicProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, solderPasteProps, solderjumperProps, spicemodelProps, stampboardProps, subcircuitGroupProps, subcircuitGroupPropsWithBool, subcircuitProps, subpanelProps, supplierProps, switchProps, symbolProp, symbolProps, testpointPins, testpointProps, toolingrailProps, traceHintProps, traceProps, transistorPins, transistorPinsLabels, transistorProps, viaProps, voltageProbeProps, voltageSourcePinLabels, voltageSourcePins, voltageSourceProps };