@tscircuit/props 0.0.675 → 0.0.677

package/dist/index.js

@@ -16533,14 +16533,13 @@ var autorouterConfig = z44.object({
     "fanout",
     "dogbone",
     "bus_lanes",
-    "single_layer_bus",
-    "single_layer_buses",
+    "single_layer_routing",
     "auto-jumper",
     "sequential-trace",
     "auto-local",
     "auto-cloud"
   ]).transform(
-    (preset) => preset === "single_layer_bus" || preset === "single_layer_buses" ? "bus_lanes" : preset
+    (preset) => preset === "single_layer_routing" ? "bus_lanes" : preset
   ).optional(),
   local: z44.boolean().optional()
 });
@@ -16562,8 +16561,7 @@ var autorouterPreset = z44.union([
   z44.literal("fanout"),
   z44.literal("dogbone"),
   z44.literal("bus_lanes"),
-  z44.literal("single_layer_bus").transform(() => "bus_lanes"),
-  z44.literal("single_layer_buses").transform(() => "bus_lanes"),
+  z44.literal("single_layer_routing").transform(() => "bus_lanes"),
   z44.literal("auto-jumper"),
   z44.literal("sequential-trace"),
   z44.literal("auto-local"),
@@ -16865,44 +16863,84 @@ var pcbBendProps = z46.object({
 });
 expectTypesMatch(true);
 
-// lib/components/pcb-stiffener.ts
+// lib/components/pcb-soldermask-opening.ts
 import { z as z47 } from "zod";
-var positiveDistance2 = distance.pipe(z47.number().finite().positive());
 var finiteDistance2 = distance.pipe(z47.number().finite());
-var stiffenerBaseProps = pcbLayoutProps.omit({ layer: true }).extend({
+var positiveDistance2 = distance.pipe(z47.number().finite().positive());
+var openingBaseProps = pcbLayoutProps.omit({ layer: true }).extend({
   name: z47.string().optional(),
+  /** Face whose solder mask or flex coverlay is removed. Required. */
+  layer: z47.enum(["top", "bottom"])
+});
+var pcbSoldermaskOpeningProps = z47.discriminatedUnion("shape", [
+  openingBaseProps.extend({
+    shape: z47.literal("rect"),
+    width: positiveDistance2,
+    height: positiveDistance2,
+    radius: z47.never().optional(),
+    points: z47.never().optional()
+  }),
+  openingBaseProps.extend({
+    shape: z47.literal("circle"),
+    radius: positiveDistance2,
+    width: z47.never().optional(),
+    height: z47.never().optional(),
+    points: z47.never().optional()
+  }),
+  openingBaseProps.extend({
+    shape: z47.literal("polygon"),
+    /** Local vertices; pcbX/pcbY/pcbRotation place the implicitly closed boundary. */
+    points: z47.array(z47.object({ x: finiteDistance2, y: finiteDistance2 })).min(3).refine((points) => {
+      const twiceArea = points.reduce((sum, point8, index) => {
+        const next = points[(index + 1) % points.length];
+        return sum + point8.x * next.y - next.x * point8.y;
+      }, 0);
+      return Number.isFinite(twiceArea) && twiceArea !== 0;
+    }, "Solder-mask opening must enclose a nonzero area"),
+    width: z47.never().optional(),
+    height: z47.never().optional(),
+    radius: z47.never().optional()
+  })
+]);
+
+// lib/components/pcb-stiffener.ts
+import { z as z48 } from "zod";
+var positiveDistance3 = distance.pipe(z48.number().finite().positive());
+var finiteDistance3 = distance.pipe(z48.number().finite());
+var stiffenerBaseProps = pcbLayoutProps.omit({ layer: true }).extend({
+  name: z48.string().optional(),
   /** Board attachment face, not a copper-layer assignment. Required. */
-  layer: z47.enum(["top", "bottom"]),
-  material: z47.enum(["fr4", "polyimide", "stainless_steel", "aluminum"]),
+  layer: z48.enum(["top", "bottom"]),
+  material: z48.enum(["fr4", "polyimide", "stainless_steel", "aluminum"]),
   /** Stiffener material thickness only, excluding PCB and adhesive. */
-  thickness: positiveDistance2,
+  thickness: positiveDistance3,
   /** Nonnegative adhesive thickness; omission means unspecified, not zero. */
-  adhesiveThickness: distance.pipe(z47.number().finite().nonnegative()).optional()
+  adhesiveThickness: distance.pipe(z48.number().finite().nonnegative()).optional()
 });
-var pcbStiffenerProps = z47.discriminatedUnion("shape", [
+var pcbStiffenerProps = z48.discriminatedUnion("shape", [
   stiffenerBaseProps.extend({
-    shape: z47.literal("rect"),
-    width: positiveDistance2,
-    height: positiveDistance2,
-    outline: z47.never().optional()
+    shape: z48.literal("rect"),
+    width: positiveDistance3,
+    height: positiveDistance3,
+    outline: z48.never().optional()
   }),
   stiffenerBaseProps.extend({
-    shape: z47.literal("polygon"),
+    shape: z48.literal("polygon"),
     /** Local vertices transformed by pcbX/pcbY/pcbRotation; implicitly closed. */
-    outline: z47.array(z47.object({ x: finiteDistance2, y: finiteDistance2 })).min(3).refine((points) => {
+    outline: z48.array(z48.object({ x: finiteDistance3, y: finiteDistance3 })).min(3).refine((points) => {
       const twiceArea = points.reduce((sum, p, i) => {
         const next = points[(i + 1) % points.length];
         return sum + p.x * next.y - next.x * p.y;
       }, 0);
       return Number.isFinite(twiceArea) && twiceArea !== 0;
     }, "Stiffener outline must enclose a nonzero area"),
-    width: z47.never().optional(),
-    height: z47.never().optional()
+    width: z48.never().optional(),
+    height: z48.never().optional()
   })
 ]);
 
 // lib/components/panel.ts
-import { z as z48 } from "zod";
+import { z as z49 } from "zod";
 var panelProps = baseGroupProps.omit({
   width: true,
   height: true,
@@ -16911,25 +16949,25 @@ var panelProps = baseGroupProps.omit({
 }).extend({
   width: distance.optional(),
   height: distance.optional(),
-  children: z48.any().optional(),
+  children: z49.any().optional(),
   anchorAlignment: ninePointAnchor.optional(),
-  noSolderMask: z48.boolean().optional(),
-  panelizationMethod: z48.enum(["tab-routing", "outline_routing", "none"]).optional(),
+  noSolderMask: z49.boolean().optional(),
+  panelizationMethod: z49.enum(["tab-routing", "outline_routing", "none"]).optional(),
   boardGap: distance.optional(),
-  layoutMode: z48.enum(["grid", "pack", "none"]).optional(),
-  row: z48.number().optional(),
-  col: z48.number().optional(),
+  layoutMode: z49.enum(["grid", "pack", "none"]).optional(),
+  row: z49.number().optional(),
+  col: z49.number().optional(),
   cellWidth: distance.optional(),
   cellHeight: distance.optional(),
   tabWidth: distance.optional(),
   tabLength: distance.optional(),
-  mouseBites: z48.boolean().optional(),
+  mouseBites: z49.boolean().optional(),
   edgePadding: distance.optional(),
   edgePaddingLeft: distance.optional(),
   edgePaddingRight: distance.optional(),
   edgePaddingTop: distance.optional(),
   edgePaddingBottom: distance.optional(),
-  _subcircuitCachingEnabled: z48.boolean().optional()
+  _subcircuitCachingEnabled: z49.boolean().optional()
 });
 expectTypesMatch(true);
 
@@ -16940,34 +16978,34 @@ expectTypesMatch(true);
 
 // lib/common/fanoutTracePath.ts
 import { layer_ref as layer_ref5 } from "circuit-json";
-import { z as z50 } from "zod";
+import { z as z51 } from "zod";
 var coordinate = distance.refine(Number.isFinite, "Coordinate must be finite");
-var positiveDistance3 = distance.refine(
+var positiveDistance4 = distance.refine(
   (value) => Number.isFinite(value) && value > 0,
   "Distance must be positive and finite"
 );
-var routePoint = z50.discriminatedUnion("route_type", [
-  z50.object({
-    route_type: z50.literal("wire"),
+var routePoint = z51.discriminatedUnion("route_type", [
+  z51.object({
+    route_type: z51.literal("wire"),
     x: coordinate,
     y: coordinate,
-    width: positiveDistance3,
-    width_interpolation_mode: z50.enum(["linear", "quadratic"]).optional().describe("Interpolate width from this point to the next wire point."),
+    width: positiveDistance4,
+    width_interpolation_mode: z51.enum(["linear", "quadratic"]).optional().describe("Interpolate width from this point to the next wire point."),
     layer: layer_ref5
   }),
-  z50.object({
-    route_type: z50.literal("via"),
+  z51.object({
+    route_type: z51.literal("via"),
     x: coordinate,
     y: coordinate,
     from_layer: layer_ref5,
     to_layer: layer_ref5,
-    via_diameter: positiveDistance3.optional(),
-    via_hole_diameter: positiveDistance3.optional()
+    via_diameter: positiveDistance4.optional(),
+    via_hole_diameter: positiveDistance4.optional()
   })
 ]);
-var fanoutTracePath = z50.object({
-  connection: z50.string().min(1),
-  route: z50.array(routePoint).min(2).superRefine((route, ctx) => {
+var fanoutTracePath = z51.object({
+  connection: z51.string().min(1),
+  route: z51.array(routePoint).min(2).superRefine((route, ctx) => {
     const first = route[0];
     let layer = first?.route_type === "via" ? first.from_layer : first?.layer;
     for (const [index, point8] of route.entries()) {
@@ -16994,16 +17032,16 @@ var fanoutTracePath = z50.object({
 
 // lib/common/fanoutProps.ts
 import { layer_ref as layer_ref6 } from "circuit-json";
-import { z as z52 } from "zod";
+import { z as z53 } from "zod";
 
 // lib/common/fanoutBoundaryPadding.ts
-import { z as z51 } from "zod";
+import { z as z52 } from "zod";
 var nonnegativeDistance = distance.refine((value) => value >= 0, {
   message: "Fanout boundary padding cannot be negative"
 });
-var fanoutBoundaryPadding = z51.union([
+var fanoutBoundaryPadding = z52.union([
   nonnegativeDistance,
-  z51.object({
+  z52.object({
     top: nonnegativeDistance.optional(),
     right: nonnegativeDistance.optional(),
     bottom: nonnegativeDistance.optional(),
@@ -17030,32 +17068,32 @@ var canonicalBusFanoutDirectionValues = [
   "leftside_top",
   "center"
 ];
-var canonicalBusFanoutDirection = z52.enum(
+var canonicalBusFanoutDirection = z53.enum(
   canonicalBusFanoutDirectionValues
 );
-var busFanoutDirection = z52.union([
+var busFanoutDirection = z53.union([
   ninePointAnchor,
   canonicalBusFanoutDirection,
-  z52.object({
-    direction: z52.union([ninePointAnchor, canonicalBusFanoutDirection])
+  z53.object({
+    direction: z53.union([ninePointAnchor, canonicalBusFanoutDirection])
   })
 ]);
-var fanoutProps = z52.object({
-  busFanoutDirections: z52.record(busFanoutDirection).optional(),
+var fanoutProps = z53.object({
+  busFanoutDirections: z53.record(busFanoutDirection).optional(),
   fanoutBoundaryPadding: fanoutBoundaryPadding.optional(),
-  fanoutRoutingLayers: z52.array(layer_ref6).min(1).optional(),
-  fanoutPourNetMap: z52.record(layer_ref6, z52.union([z52.string(), z52.array(z52.string()).min(1)])).optional()
+  fanoutRoutingLayers: z53.array(layer_ref6).min(1).optional(),
+  fanoutPourNetMap: z53.record(layer_ref6, z53.union([z53.string(), z53.array(z53.string()).min(1)])).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/breakout.ts
-import { z as z53 } from "zod";
+import { z as z54 } from "zod";
 var nonnegativeFanoutMargin = distance.refine((value) => value >= 0, {
   message: "Fanout margin cannot be negative"
 });
 var breakoutProps = subcircuitGroupProps.extend({
   autorouter: autorouterProp.default("fanout"),
-  pcbTracePaths: z53.array(fanoutTracePath).optional(),
+  pcbTracePaths: z54.array(fanoutTracePath).optional(),
   padding: distance.optional(),
   paddingLeft: distance.optional(),
   paddingRight: distance.optional(),
@@ -17069,41 +17107,41 @@ expectTypesMatch(true);
 // lib/components/chip.ts
 import { distance as distance12, supplier_name as supplier_name2 } from "circuit-json";
 import { isValidElement } from "react";
-import { z as z54 } from "zod";
-var connectionTarget2 = z54.string().or(z54.array(z54.string()).readonly()).or(z54.array(z54.string()));
-var noConnectProp = z54.array(schematicPinLabel).readonly().or(z54.array(schematicPinLabel));
-var connectionsProp = z54.custom().pipe(z54.record(z54.string(), connectionTarget2));
-var spicemodelElement = z54.custom(
+import { z as z55 } from "zod";
+var connectionTarget2 = z55.string().or(z55.array(z55.string()).readonly()).or(z55.array(z55.string()));
+var noConnectProp = z55.array(schematicPinLabel).readonly().or(z55.array(schematicPinLabel));
+var connectionsProp = z55.custom().pipe(z55.record(z55.string(), connectionTarget2));
+var spicemodelElement = z55.custom(
   (v) => !!v && typeof v === "object" && "type" in v && "props" in v
 );
-var internalCircuitElement = z54.custom(
+var internalCircuitElement = z55.custom(
   (value) => isValidElement(value) && value.type === "internalcircuit"
 );
-var pinLabelsProp = z54.record(
+var pinLabelsProp = z55.record(
   schematicPinLabel,
-  schematicPinLabel.or(z54.array(schematicPinLabel).readonly()).or(z54.array(schematicPinLabel))
+  schematicPinLabel.or(z55.array(schematicPinLabel).readonly()).or(z55.array(schematicPinLabel))
 );
 expectTypesMatch(true);
-var pinCompatibleVariant = z54.object({
-  manufacturerPartNumber: z54.string().optional(),
-  supplierPartNumber: z54.record(supplier_name2, z54.array(z54.string())).optional()
+var pinCompatibleVariant = z55.object({
+  manufacturerPartNumber: z55.string().optional(),
+  supplierPartNumber: z55.record(supplier_name2, z55.array(z55.string())).optional()
 });
 var chipProps = commonComponentProps.extend({
-  manufacturerPartNumber: z54.string().optional(),
+  manufacturerPartNumber: z55.string().optional(),
   pinLabels: pinLabelsProp.optional(),
-  showPinAliases: z54.boolean().optional(),
-  pcbPinLabels: z54.record(z54.string(), z54.string()).optional(),
-  internallyConnectedPins: z54.array(z54.array(z54.union([z54.string(), z54.number()]))).optional(),
-  externallyConnectedPins: z54.array(z54.array(z54.string())).optional(),
+  showPinAliases: z55.boolean().optional(),
+  pcbPinLabels: z55.record(z55.string(), z55.string()).optional(),
+  internallyConnectedPins: z55.array(z55.array(z55.union([z55.string(), z55.number()]))).optional(),
+  externallyConnectedPins: z55.array(z55.array(z55.string())).optional(),
   schPinArrangement: schematicPortArrangement.optional(),
   schPortArrangement: schematicPortArrangement.optional(),
-  pinCompatibleVariants: z54.array(pinCompatibleVariant).optional(),
+  pinCompatibleVariants: z55.array(pinCompatibleVariant).optional(),
   schPinStyle: schematicPinStyle.optional(),
   schPinSpacing: distance12.optional(),
   schWidth: distance12.optional(),
   schHeight: distance12.optional(),
-  noSchematicRepresentation: z54.boolean().optional(),
-  schShowInternalCircuit: z54.boolean().optional().default(false),
+  noSchematicRepresentation: z55.boolean().optional(),
+  schShowInternalCircuit: z55.boolean().optional().default(false),
   noConnect: noConnectProp.optional(),
   connections: connectionsProp.optional(),
   spiceModel: spicemodelElement.optional(),
@@ -17118,38 +17156,38 @@ expectTypesMatch(true);
 
 // lib/components/jumper.ts
 import { distance as distance13 } from "circuit-json";
-import { z as z55 } from "zod";
+import { z as z56 } from "zod";
 var jumperProps = commonComponentProps.extend({
-  manufacturerPartNumber: z55.string().optional(),
-  pinLabels: z55.record(
-    z55.number().or(schematicPinLabel),
-    schematicPinLabel.or(z55.array(schematicPinLabel))
+  manufacturerPartNumber: z56.string().optional(),
+  pinLabels: z56.record(
+    z56.number().or(schematicPinLabel),
+    schematicPinLabel.or(z56.array(schematicPinLabel))
   ).optional(),
   schPinStyle: schematicPinStyle.optional(),
   schPinSpacing: distance13.optional(),
   schWidth: distance13.optional(),
   schHeight: distance13.optional(),
-  schDirection: z55.enum(["left", "right"]).optional(),
+  schDirection: z56.enum(["left", "right"]).optional(),
   schPinArrangement: schematicPinArrangement.optional(),
   schPortArrangement: schematicPortArrangement.optional(),
-  pcbPinLabels: z55.record(z55.string(), z55.string()).optional(),
-  pinCount: z55.union([z55.literal(2), z55.literal(3)]).optional(),
-  internallyConnectedPins: z55.array(z55.array(z55.union([z55.string(), z55.number()]))).optional(),
-  connections: z55.custom().pipe(z55.record(z55.string(), connectionTarget)).optional()
+  pcbPinLabels: z56.record(z56.string(), z56.string()).optional(),
+  pinCount: z56.union([z56.literal(2), z56.literal(3)]).optional(),
+  internallyConnectedPins: z56.array(z56.array(z56.union([z56.string(), z56.number()]))).optional(),
+  connections: z56.custom().pipe(z56.record(z56.string(), connectionTarget)).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/solderjumper.ts
-import { z as z56 } from "zod";
+import { z as z57 } from "zod";
 var solderjumperProps = jumperProps.extend({
-  bridgedPins: z56.array(z56.array(z56.string())).optional(),
-  bridged: z56.boolean().optional()
+  bridgedPins: z57.array(z57.array(z57.string())).optional(),
+  bridged: z57.boolean().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/connector.ts
-import { z as z57 } from "zod";
-var connectorStandard = z57.enum([
+import { z as z58 } from "zod";
+var connectorStandard = z58.enum([
   "usb_c",
   "m2",
   "jst_sh",
@@ -17161,43 +17199,43 @@ var connectorStandard = z57.enum([
 ]);
 var connectorProps = chipProps.extend({
   standard: connectorStandard.optional(),
-  pinCount: z57.number().int().positive().optional()
+  pinCount: z58.number().int().positive().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/interconnect.ts
-import { z as z58 } from "zod";
+import { z as z59 } from "zod";
 var interconnectProps = commonComponentProps.extend({
-  standard: z58.enum(["TSC0001_36P_XALT_2025_11", "0805", "0603", "1206"]).optional(),
-  pinLabels: z58.record(
-    z58.number().or(schematicPinLabel),
-    schematicPinLabel.or(z58.array(schematicPinLabel))
+  standard: z59.enum(["TSC0001_36P_XALT_2025_11", "0805", "0603", "1206"]).optional(),
+  pinLabels: z59.record(
+    z59.number().or(schematicPinLabel),
+    schematicPinLabel.or(z59.array(schematicPinLabel))
   ).optional(),
-  internallyConnectedPins: z58.array(z58.array(z58.union([z58.string(), z58.number()]))).optional()
+  internallyConnectedPins: z59.array(z59.array(z59.union([z59.string(), z59.number()]))).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/fuse.ts
-import { z as z59 } from "zod";
+import { z as z60 } from "zod";
 var fusePinLabels = ["pin1", "pin2"];
 var fuseProps = commonComponentProps.extend({
-  currentRating: z59.union([z59.number(), z59.string()]),
-  voltageRating: z59.union([z59.number(), z59.string()]).optional(),
-  schShowRatings: z59.boolean().optional(),
+  currentRating: z60.union([z60.number(), z60.string()]),
+  voltageRating: z60.union([z60.number(), z60.string()]).optional(),
+  schShowRatings: z60.boolean().optional(),
   schOrientation: schematicOrientation.optional(),
-  connections: z59.record(
-    z59.string(),
-    z59.union([
-      z59.string(),
-      z59.array(z59.string()).readonly(),
-      z59.array(z59.string())
+  connections: z60.record(
+    z60.string(),
+    z60.union([
+      z60.string(),
+      z60.array(z60.string()).readonly(),
+      z60.array(z60.string())
     ])
   ).optional()
 });
 
 // lib/components/platedhole.ts
 import { distance as distance14 } from "circuit-json";
-import { z as z60 } from "zod";
+import { z as z61 } from "zod";
 var DEFAULT_PIN_HEADER_HOLE_DIAMETER = "0.04in";
 var DEFAULT_PIN_HEADER_OUTER_DIAMETER = "0.1in";
 var inferPlatedHoleShapeAndDefaults = (rawProps) => {
@@ -17229,26 +17267,26 @@ var inferPlatedHoleShapeAndDefaults = (rawProps) => {
   props.outerDiameter = DEFAULT_PIN_HEADER_OUTER_DIAMETER;
   return props;
 };
-var distanceHiddenUndefined = z60.custom().transform((a) => {
+var distanceHiddenUndefined = z61.custom().transform((a) => {
   if (a === void 0) return void 0;
   return distance14.parse(a);
 });
-var platedHolePropsByShape = z60.discriminatedUnion("shape", [
+var platedHolePropsByShape = z61.discriminatedUnion("shape", [
   pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
-    name: z60.string().optional(),
-    connectsTo: z60.string().or(z60.array(z60.string())).optional(),
-    shape: z60.literal("circle"),
+    name: z61.string().optional(),
+    connectsTo: z61.string().or(z61.array(z61.string())).optional(),
+    shape: z61.literal("circle"),
     holeDiameter: distance14,
     outerDiameter: distance14,
     padDiameter: distance14.optional().describe("Diameter of the copper pad"),
     portHints: portHints.optional(),
     solderMaskMargin: distance14.optional(),
-    coveredWithSolderMask: z60.boolean().optional()
+    coveredWithSolderMask: z61.boolean().optional()
   }),
   pcbLayoutProps.omit({ layer: true }).extend({
-    name: z60.string().optional(),
-    connectsTo: z60.string().or(z60.array(z60.string())).optional(),
-    shape: z60.literal("oval"),
+    name: z61.string().optional(),
+    connectsTo: z61.string().or(z61.array(z61.string())).optional(),
+    shape: z61.literal("oval"),
     outerWidth: distance14,
     outerHeight: distance14,
     holeWidth: distanceHiddenUndefined,
@@ -17257,13 +17295,13 @@ var platedHolePropsByShape = z60.discriminatedUnion("shape", [
     innerHeight: distance14.optional().describe("DEPRECATED use holeHeight"),
     portHints: portHints.optional(),
     solderMaskMargin: distance14.optional(),
-    coveredWithSolderMask: z60.boolean().optional()
+    coveredWithSolderMask: z61.boolean().optional()
   }),
   pcbLayoutProps.omit({ layer: true }).extend({
-    name: z60.string().optional(),
-    connectsTo: z60.string().or(z60.array(z60.string())).optional(),
-    shape: z60.literal("pill"),
-    rectPad: z60.boolean().optional(),
+    name: z61.string().optional(),
+    connectsTo: z61.string().or(z61.array(z61.string())).optional(),
+    shape: z61.literal("pill"),
+    rectPad: z61.boolean().optional(),
     outerWidth: distance14,
     outerHeight: distance14,
     holeWidth: distanceHiddenUndefined,
@@ -17274,30 +17312,30 @@ var platedHolePropsByShape = z60.discriminatedUnion("shape", [
     holeOffsetX: distance14.optional(),
     holeOffsetY: distance14.optional(),
     solderMaskMargin: distance14.optional(),
-    coveredWithSolderMask: z60.boolean().optional()
+    coveredWithSolderMask: z61.boolean().optional()
   }),
   pcbLayoutProps.omit({ layer: true }).extend({
-    name: z60.string().optional(),
-    connectsTo: z60.string().or(z60.array(z60.string())).optional(),
-    shape: z60.literal("circular_hole_with_rect_pad"),
+    name: z61.string().optional(),
+    connectsTo: z61.string().or(z61.array(z61.string())).optional(),
+    shape: z61.literal("circular_hole_with_rect_pad"),
     holeDiameter: distance14,
     rectPadWidth: distance14,
     rectPadHeight: distance14,
     rectBorderRadius: distance14.optional(),
-    holeShape: z60.literal("circle").optional(),
-    padShape: z60.literal("rect").optional(),
+    holeShape: z61.literal("circle").optional(),
+    padShape: z61.literal("rect").optional(),
     portHints: portHints.optional(),
     holeOffsetX: distance14.optional(),
     holeOffsetY: distance14.optional(),
     solderMaskMargin: distance14.optional(),
-    coveredWithSolderMask: z60.boolean().optional()
+    coveredWithSolderMask: z61.boolean().optional()
   }),
   pcbLayoutProps.omit({ layer: true }).extend({
-    name: z60.string().optional(),
-    connectsTo: z60.string().or(z60.array(z60.string())).optional(),
-    shape: z60.literal("pill_hole_with_rect_pad"),
-    holeShape: z60.literal("pill").optional(),
-    padShape: z60.literal("rect").optional(),
+    name: z61.string().optional(),
+    connectsTo: z61.string().or(z61.array(z61.string())).optional(),
+    shape: z61.literal("pill_hole_with_rect_pad"),
+    holeShape: z61.literal("pill").optional(),
+    padShape: z61.literal("rect").optional(),
     holeWidth: distance14,
     holeHeight: distance14,
     rectPadWidth: distance14,
@@ -17307,22 +17345,22 @@ var platedHolePropsByShape = z60.discriminatedUnion("shape", [
     holeOffsetX: distance14.optional(),
     holeOffsetY: distance14.optional(),
     solderMaskMargin: distance14.optional(),
-    coveredWithSolderMask: z60.boolean().optional()
+    coveredWithSolderMask: z61.boolean().optional()
   }),
   pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
-    name: z60.string().optional(),
-    connectsTo: z60.string().or(z60.array(z60.string())).optional(),
-    shape: z60.literal("hole_with_polygon_pad"),
-    holeShape: z60.enum(["circle", "oval", "pill", "rotated_pill"]),
+    name: z61.string().optional(),
+    connectsTo: z61.string().or(z61.array(z61.string())).optional(),
+    shape: z61.literal("hole_with_polygon_pad"),
+    holeShape: z61.enum(["circle", "oval", "pill", "rotated_pill"]),
     holeDiameter: distance14.optional(),
     holeWidth: distance14.optional(),
     holeHeight: distance14.optional(),
-    padOutline: z60.array(point),
+    padOutline: z61.array(point),
     holeOffsetX: distance14,
     holeOffsetY: distance14,
     portHints: portHints.optional(),
     solderMaskMargin: distance14.optional(),
-    coveredWithSolderMask: z60.boolean().optional()
+    coveredWithSolderMask: z61.boolean().optional()
   })
 ]).transform((a) => {
   if ("innerWidth" in a && a.innerWidth !== void 0) {
@@ -17333,7 +17371,7 @@ var platedHolePropsByShape = z60.discriminatedUnion("shape", [
   }
   return a;
 });
-var platedHoleProps = z60.preprocess(
+var platedHoleProps = z61.preprocess(
   inferPlatedHoleShapeAndDefaults,
   platedHolePropsByShape
 );
@@ -17341,7 +17379,7 @@ expectTypesMatch(true);
 
 // lib/components/resistor.ts
 import { resistance } from "circuit-json";
-import { z as z61 } from "zod";
+import { z as z62 } from "zod";
 var resistorPinLabels = ["pin1", "pin2", "pos", "neg"];
 var resistorImperialFootprintNames = /* @__PURE__ */ new Set([
   "01005",
@@ -17365,7 +17403,7 @@ var resistorFootprintProp = footprintProp.optional().transform(mapResistorFootpr
 var resistorProps = commonComponentProps.extend({
   footprint: resistorFootprintProp,
   resistance,
-  tolerance: z61.union([z61.string(), z61.number()]).transform((val) => {
+  tolerance: z62.union([z62.string(), z62.number()]).transform((val) => {
     if (typeof val === "string") {
       if (val.endsWith("%")) {
         return parseFloat(val.slice(0, -1)) / 100;
@@ -17374,12 +17412,12 @@ var resistorProps = commonComponentProps.extend({
     }
     return val;
   }).pipe(
-    z61.number().min(0, "Tolerance must be non-negative").max(1, "Tolerance cannot be greater than 100%")
+    z62.number().min(0, "Tolerance must be non-negative").max(1, "Tolerance cannot be greater than 100%")
   ).optional(),
-  pullupFor: z61.string().optional(),
-  pullupTo: z61.string().optional(),
-  pulldownFor: z61.string().optional(),
-  pulldownTo: z61.string().optional(),
+  pullupFor: z62.string().optional(),
+  pullupTo: z62.string().optional(),
+  pulldownFor: z62.string().optional(),
+  pulldownTo: z62.string().optional(),
   schOrientation: schematicOrientation.optional(),
   schSize: schematicSymbolSize.optional(),
   connections: createConnectionsProp(resistorPinLabels).optional()
@@ -17389,18 +17427,18 @@ expectTypesMatch(true);
 
 // lib/components/potentiometer.ts
 import { resistance as resistance2 } from "circuit-json";
-import { z as z62 } from "zod";
+import { z as z63 } from "zod";
 var potentiometerPinLabels = ["pin1", "pin2", "pin3"];
 var potentiometerProps = commonComponentProps.extend({
   maxResistance: resistance2,
-  pinVariant: z62.enum(["two_pin", "three_pin"]).optional(),
+  pinVariant: z63.enum(["two_pin", "three_pin"]).optional(),
   connections: createConnectionsProp(potentiometerPinLabels).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/crystal.ts
 import { capacitance, distance as distance15, frequency } from "circuit-json";
-import { z as z63 } from "zod";
+import { z as z64 } from "zod";
 var crystalPins = [
   "pin1",
   "left",
@@ -17413,9 +17451,9 @@ var crystalProps = commonComponentProps.extend({
   frequency,
   loadCapacitance: capacitance,
   maxTraceLength: distance15.optional(),
-  manufacturerPartNumber: z63.string().optional(),
-  mpn: z63.string().optional(),
-  pinVariant: z63.enum(["two_pin", "four_pin"]).optional(),
+  manufacturerPartNumber: z64.string().optional(),
+  mpn: z64.string().optional(),
+  pinVariant: z64.enum(["two_pin", "four_pin"]).optional(),
   schOrientation: schematicOrientation.optional(),
   connections: createConnectionsProp(crystalPins).optional()
 });
@@ -17423,34 +17461,34 @@ expectTypesMatch(true);
 
 // lib/components/resonator.ts
 import { frequency as frequency2, capacitance as capacitance2 } from "circuit-json";
-import { z as z64 } from "zod";
+import { z as z65 } from "zod";
 var resonatorProps = commonComponentProps.extend({
   frequency: frequency2,
   loadCapacitance: capacitance2,
-  pinVariant: z64.enum(["no_ground", "ground_pin", "two_ground_pins"]).optional()
+  pinVariant: z65.enum(["no_ground", "ground_pin", "two_ground_pins"]).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/stampboard.ts
 import { distance as distance16 } from "circuit-json";
-import { z as z65 } from "zod";
+import { z as z66 } from "zod";
 var stampboardProps = boardProps.extend({
-  leftPinCount: z65.number().optional(),
-  rightPinCount: z65.number().optional(),
-  topPinCount: z65.number().optional(),
-  bottomPinCount: z65.number().optional(),
-  leftPins: z65.array(z65.string()).optional(),
-  rightPins: z65.array(z65.string()).optional(),
-  topPins: z65.array(z65.string()).optional(),
-  bottomPins: z65.array(z65.string()).optional(),
+  leftPinCount: z66.number().optional(),
+  rightPinCount: z66.number().optional(),
+  topPinCount: z66.number().optional(),
+  bottomPinCount: z66.number().optional(),
+  leftPins: z66.array(z66.string()).optional(),
+  rightPins: z66.array(z66.string()).optional(),
+  topPins: z66.array(z66.string()).optional(),
+  bottomPins: z66.array(z66.string()).optional(),
   pinPitch: distance16.optional(),
-  innerHoles: z65.boolean().optional()
+  innerHoles: z66.boolean().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/capacitor.ts
 import { capacitance as capacitance3, distance as distance17, voltage } from "circuit-json";
-import { z as z66 } from "zod";
+import { z as z67 } from "zod";
 var capacitorPinLabels = [
   "pin1",
   "pin2",
@@ -17462,12 +17500,12 @@ var capacitorPinLabels = [
 var capacitorProps = commonComponentProps.extend({
   capacitance: capacitance3,
   maxVoltageRating: voltage.optional(),
-  schShowRatings: z66.boolean().optional().default(false),
-  polarized: z66.boolean().optional().default(false),
-  decouplingFor: z66.string().optional(),
-  decouplingTo: z66.string().optional(),
-  bypassFor: z66.string().optional(),
-  bypassTo: z66.string().optional(),
+  schShowRatings: z67.boolean().optional().default(false),
+  polarized: z67.boolean().optional().default(false),
+  decouplingFor: z67.string().optional(),
+  decouplingTo: z67.string().optional(),
+  bypassFor: z67.string().optional(),
+  bypassTo: z67.string().optional(),
   maxDecouplingTraceLength: distance17.optional(),
   schOrientation: schematicOrientation.optional(),
   schSize: schematicSymbolSize.optional(),
@@ -17478,14 +17516,14 @@ expectTypesMatch(true);
 
 // lib/components/net.ts
 import { distance as distance18 } from "circuit-json";
-import { z as z67 } from "zod";
-var netProps = z67.object({
-  name: z67.string(),
-  connectsTo: z67.string().or(z67.array(z67.string())).optional(),
-  routingPhaseIndex: z67.number().nullable().optional(),
-  highlightColor: z67.string().optional(),
-  isPowerNet: z67.boolean().optional(),
-  isGroundNet: z67.boolean().optional(),
+import { z as z68 } from "zod";
+var netProps = z68.object({
+  name: z68.string(),
+  connectsTo: z68.string().or(z68.array(z68.string())).optional(),
+  routingPhaseIndex: z68.number().nullable().optional(),
+  highlightColor: z68.string().optional(),
+  isPowerNet: z68.boolean().optional(),
+  isGroundNet: z68.boolean().optional(),
   nominalTraceWidth: distance18.optional()
 });
 expectTypesMatch(true);
@@ -17499,55 +17537,55 @@ var fiducialProps = commonComponentProps.extend({
 expectTypesMatch(true);
 
 // lib/components/constrainedlayout.ts
-import { z as z69 } from "zod";
-var constrainedLayoutProps = z69.object({
-  name: z69.string().optional(),
-  pcbOnly: z69.boolean().optional(),
-  schOnly: z69.boolean().optional()
+import { z as z70 } from "zod";
+var constrainedLayoutProps = z70.object({
+  name: z70.string().optional(),
+  pcbOnly: z70.boolean().optional(),
+  schOnly: z70.boolean().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/constraint.ts
-import { z as z70 } from "zod";
-var pcbXDistConstraintProps = z70.object({
-  pcb: z70.literal(true).optional(),
+import { z as z71 } from "zod";
+var pcbXDistConstraintProps = z71.object({
+  pcb: z71.literal(true).optional(),
   xDist: distance,
-  left: z70.string(),
-  right: z70.string(),
-  edgeToEdge: z70.literal(true).optional(),
-  centerToCenter: z70.literal(true).optional()
+  left: z71.string(),
+  right: z71.string(),
+  edgeToEdge: z71.literal(true).optional(),
+  centerToCenter: z71.literal(true).optional()
 });
 expectTypesMatch(
   true
 );
-var pcbYDistConstraintProps = z70.object({
-  pcb: z70.literal(true).optional(),
+var pcbYDistConstraintProps = z71.object({
+  pcb: z71.literal(true).optional(),
   yDist: distance,
-  top: z70.string(),
-  bottom: z70.string(),
-  edgeToEdge: z70.literal(true).optional(),
-  centerToCenter: z70.literal(true).optional()
+  top: z71.string(),
+  bottom: z71.string(),
+  edgeToEdge: z71.literal(true).optional(),
+  centerToCenter: z71.literal(true).optional()
 });
 expectTypesMatch(
   true
 );
-var pcbSameYConstraintProps = z70.object({
-  pcb: z70.literal(true).optional(),
-  sameY: z70.literal(true).optional(),
-  for: z70.array(z70.string())
+var pcbSameYConstraintProps = z71.object({
+  pcb: z71.literal(true).optional(),
+  sameY: z71.literal(true).optional(),
+  for: z71.array(z71.string())
 });
 expectTypesMatch(
   true
 );
-var pcbSameXConstraintProps = z70.object({
-  pcb: z70.literal(true).optional(),
-  sameX: z70.literal(true).optional(),
-  for: z70.array(z70.string())
+var pcbSameXConstraintProps = z71.object({
+  pcb: z71.literal(true).optional(),
+  sameX: z71.literal(true).optional(),
+  for: z71.array(z71.string())
 });
 expectTypesMatch(
   true
 );
-var constraintProps = z70.union([
+var constraintProps = z71.union([
   pcbXDistConstraintProps,
   pcbYDistConstraintProps,
   pcbSameYConstraintProps,
@@ -17556,13 +17594,13 @@ var constraintProps = z70.union([
 expectTypesMatch(true);
 
 // lib/components/cutout.ts
-import { z as z71 } from "zod";
+import { z as z72 } from "zod";
 var rectCutoutProps = pcbLayoutProps.omit({
   layer: true,
   pcbRotation: true
 }).extend({
-  name: z71.string().optional(),
-  shape: z71.literal("rect"),
+  name: z72.string().optional(),
+  shape: z72.literal("rect"),
   width: distance,
   height: distance
 });
@@ -17571,8 +17609,8 @@ var circleCutoutProps = pcbLayoutProps.omit({
   layer: true,
   pcbRotation: true
 }).extend({
-  name: z71.string().optional(),
-  shape: z71.literal("circle"),
+  name: z72.string().optional(),
+  shape: z72.literal("circle"),
   radius: distance
 });
 expectTypesMatch(true);
@@ -17580,36 +17618,36 @@ var polygonCutoutProps = pcbLayoutProps.omit({
   layer: true,
   pcbRotation: true
 }).extend({
-  name: z71.string().optional(),
-  shape: z71.literal("polygon"),
-  points: z71.array(point)
+  name: z72.string().optional(),
+  shape: z72.literal("polygon"),
+  points: z72.array(point)
 });
 expectTypesMatch(true);
-var cutoutProps = z71.discriminatedUnion("shape", [
+var cutoutProps = z72.discriminatedUnion("shape", [
   rectCutoutProps,
   circleCutoutProps,
   polygonCutoutProps
 ]);
 
 // lib/components/drc-check.ts
-import { z as z72 } from "zod";
-var drcCheckProps = z72.object({
-  name: z72.string().optional(),
+import { z as z73 } from "zod";
+var drcCheckProps = z73.object({
+  name: z73.string().optional(),
   checkFn: customDrcCheckFn
 });
 expectTypesMatch(true);
 
 // lib/components/smtpad.ts
-import { z as z73 } from "zod";
+import { z as z74 } from "zod";
 var rectSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  name: z73.string().optional(),
-  shape: z73.literal("rect"),
+  name: z74.string().optional(),
+  shape: z74.literal("rect"),
   width: distance,
   height: distance,
   rectBorderRadius: distance.optional(),
   cornerRadius: distance.optional(),
   portHints: portHints.optional(),
-  coveredWithSolderMask: z73.boolean().optional(),
+  coveredWithSolderMask: z74.boolean().optional(),
   solderMaskMargin: distance.optional(),
   solderMaskMarginLeft: distance.optional(),
   solderMaskMarginRight: distance.optional(),
@@ -17619,14 +17657,14 @@ var rectSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
 });
 expectTypesMatch(true);
 var rotatedRectSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  name: z73.string().optional(),
-  shape: z73.literal("rotated_rect"),
+  name: z74.string().optional(),
+  shape: z74.literal("rotated_rect"),
   width: distance,
   height: distance,
-  ccwRotation: z73.number(),
+  ccwRotation: z74.number(),
   cornerRadius: distance.optional(),
   portHints: portHints.optional(),
-  coveredWithSolderMask: z73.boolean().optional(),
+  coveredWithSolderMask: z74.boolean().optional(),
   solderMaskMargin: distance.optional(),
   solderMaskMarginLeft: distance.optional(),
   solderMaskMarginRight: distance.optional(),
@@ -17636,51 +17674,51 @@ var rotatedRectSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
 });
 expectTypesMatch(true);
 var circleSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  name: z73.string().optional(),
-  shape: z73.literal("circle"),
+  name: z74.string().optional(),
+  shape: z74.literal("circle"),
   radius: distance,
   portHints: portHints.optional(),
-  coveredWithSolderMask: z73.boolean().optional(),
+  coveredWithSolderMask: z74.boolean().optional(),
   solderMaskMargin: distance.optional(),
   solderPasteMargin: distance.optional()
 });
 expectTypesMatch(true);
 var pillSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  name: z73.string().optional(),
-  shape: z73.literal("pill"),
+  name: z74.string().optional(),
+  shape: z74.literal("pill"),
   width: distance,
   height: distance,
   radius: distance,
   portHints: portHints.optional(),
-  coveredWithSolderMask: z73.boolean().optional(),
+  coveredWithSolderMask: z74.boolean().optional(),
   solderMaskMargin: distance.optional(),
   solderPasteMargin: distance.optional()
 });
 expectTypesMatch(true);
 var rotatedPillSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  name: z73.string().optional(),
-  shape: z73.literal("rotated_pill"),
+  name: z74.string().optional(),
+  shape: z74.literal("rotated_pill"),
   width: distance,
   height: distance,
   radius: distance,
-  ccwRotation: z73.number(),
+  ccwRotation: z74.number(),
   portHints: portHints.optional(),
-  coveredWithSolderMask: z73.boolean().optional(),
+  coveredWithSolderMask: z74.boolean().optional(),
   solderMaskMargin: distance.optional(),
   solderPasteMargin: distance.optional()
 });
 expectTypesMatch(true);
 var polygonSmtPadProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  name: z73.string().optional(),
-  shape: z73.literal("polygon"),
-  points: z73.array(point),
+  name: z74.string().optional(),
+  shape: z74.literal("polygon"),
+  points: z74.array(point),
   portHints: portHints.optional(),
-  coveredWithSolderMask: z73.boolean().optional(),
+  coveredWithSolderMask: z74.boolean().optional(),
   solderMaskMargin: distance.optional(),
   solderPasteMargin: distance.optional()
 });
 expectTypesMatch(true);
-var smtPadProps = z73.discriminatedUnion("shape", [
+var smtPadProps = z74.discriminatedUnion("shape", [
   circleSmtPadProps,
   rectSmtPadProps,
   rotatedRectSmtPadProps,
@@ -17691,63 +17729,63 @@ var smtPadProps = z73.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // lib/components/solderpaste.ts
-import { z as z74 } from "zod";
+import { z as z75 } from "zod";
 var rectSolderPasteProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  shape: z74.literal("rect"),
+  shape: z75.literal("rect"),
   width: distance,
   height: distance
 });
 expectTypesMatch(true);
 var circleSolderPasteProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  shape: z74.literal("circle"),
+  shape: z75.literal("circle"),
   radius: distance
 });
 expectTypesMatch(true);
-var solderPasteProps = z74.union([
+var solderPasteProps = z75.union([
   circleSolderPasteProps,
   rectSolderPasteProps
 ]);
 expectTypesMatch(true);
 
 // lib/components/hole.ts
-import { z as z75 } from "zod";
+import { z as z76 } from "zod";
 var circleHoleProps = pcbLayoutProps.extend({
-  name: z75.string().optional(),
-  shape: z75.literal("circle").optional(),
+  name: z76.string().optional(),
+  shape: z76.literal("circle").optional(),
   diameter: distance.optional(),
   radius: distance.optional(),
   solderMaskMargin: distance.optional(),
-  coveredWithSolderMask: z75.boolean().optional()
+  coveredWithSolderMask: z76.boolean().optional()
 }).transform((d) => ({
   ...d,
   diameter: d.diameter ?? 2 * d.radius,
   radius: d.radius ?? d.diameter / 2
 }));
 var pillHoleProps = pcbLayoutProps.extend({
-  name: z75.string().optional(),
-  shape: z75.literal("pill"),
+  name: z76.string().optional(),
+  shape: z76.literal("pill"),
   width: distance,
   height: distance,
   solderMaskMargin: distance.optional(),
-  coveredWithSolderMask: z75.boolean().optional()
+  coveredWithSolderMask: z76.boolean().optional()
 });
 var ovalHoleProps = pcbLayoutProps.extend({
-  name: z75.string().optional(),
-  shape: z75.literal("oval"),
+  name: z76.string().optional(),
+  shape: z76.literal("oval"),
   width: distance,
   height: distance,
   solderMaskMargin: distance.optional(),
-  coveredWithSolderMask: z75.boolean().optional()
+  coveredWithSolderMask: z76.boolean().optional()
 });
 var rectHoleProps = pcbLayoutProps.extend({
-  name: z75.string().optional(),
-  shape: z75.literal("rect"),
+  name: z76.string().optional(),
+  shape: z76.literal("rect"),
   width: distance,
   height: distance,
   solderMaskMargin: distance.optional(),
-  coveredWithSolderMask: z75.boolean().optional()
+  coveredWithSolderMask: z76.boolean().optional()
 });
-var holeProps = z75.union([
+var holeProps = z76.union([
   circleHoleProps,
   pillHoleProps,
   ovalHoleProps,
@@ -17756,7 +17794,7 @@ var holeProps = z75.union([
 expectTypesMatch(true);
 
 // lib/components/antenna.ts
-import { z as z76 } from "zod";
+import { z as z77 } from "zod";
 var antennaShapes = [
   "2.4ghz_quarter_wave_monopole",
   "2.4ghz_meandered_monopole",
@@ -17764,7 +17802,7 @@ var antennaShapes = [
   "2.4ghz_meandered_inverted_f",
   "2.4ghz_folded_dipole"
 ];
-var antennaShape = z76.enum(antennaShapes);
+var antennaShape = z77.enum(antennaShapes);
 var antennaFrequencyBands = [
   "2.4ghz",
   "5ghz",
@@ -17772,7 +17810,7 @@ var antennaFrequencyBands = [
   "dual_band_2.4ghz_5ghz",
   "tri_band_2.4ghz_5ghz_6ghz"
 ];
-var antennaFrequencyBand = z76.enum(antennaFrequencyBands);
+var antennaFrequencyBand = z77.enum(antennaFrequencyBands);
 var antennaProps = commonComponentProps.extend({
   antennaShape: antennaShape.optional(),
   frequencyBand: antennaFrequencyBand.optional(),
@@ -17782,39 +17820,39 @@ expectTypesMatch(true);
 
 // lib/components/trace.ts
 import { distance as distance19, route_hint_point as route_hint_point2 } from "circuit-json";
-import { z as z77 } from "zod";
-var portRef = z77.union([
-  z77.string(),
-  z77.custom(
+import { z as z78 } from "zod";
+var portRef = z78.union([
+  z78.string(),
+  z78.custom(
     (v) => typeof v === "object" && v !== null && "getPortSelector" in v && typeof v.getPortSelector === "function"
   )
 ]);
-var baseTraceProps = z77.object({
-  key: z77.string().optional(),
-  name: z77.string().optional(),
-  displayName: z77.string().optional(),
+var baseTraceProps = z78.object({
+  key: z78.string().optional(),
+  name: z78.string().optional(),
+  displayName: z78.string().optional(),
   thickness: distance19.optional(),
   width: distance19.optional().describe("Alias for trace thickness"),
-  schematicRouteHints: z77.array(point).optional(),
-  pcbRouteHints: z77.array(route_hint_point2).optional(),
-  pcbTeardrops: z77.boolean().optional().describe("Enable PCB trace teardrops."),
-  pcbTeardropStart: z77.boolean().optional().describe("Teardrop at the start (from) of trace"),
-  pcbTeardropEnd: z77.boolean().optional().describe("Teardrop at the end (to) of trace"),
-  pcbPathRelativeTo: z77.string().optional(),
+  schematicRouteHints: z78.array(point).optional(),
+  pcbRouteHints: z78.array(route_hint_point2).optional(),
+  pcbTeardrops: z78.boolean().optional().describe("Enable PCB trace teardrops."),
+  pcbTeardropStart: z78.boolean().optional().describe("Teardrop at the start (from) of trace"),
+  pcbTeardropEnd: z78.boolean().optional().describe("Teardrop at the end (to) of trace"),
+  pcbPathRelativeTo: z78.string().optional(),
   pcbPath: pcbPath.optional(),
-  pcbPaths: z77.array(pcbPath).optional(),
-  routingPhaseIndex: z77.number().nullable().optional(),
-  pcbStraightLine: z77.boolean().optional().describe("Draw a straight pcb trace between the connected points"),
-  schDisplayLabel: z77.string().optional(),
-  schStroke: z77.string().optional(),
-  highlightColor: z77.string().optional(),
+  pcbPaths: z78.array(pcbPath).optional(),
+  routingPhaseIndex: z78.number().nullable().optional(),
+  pcbStraightLine: z78.boolean().optional().describe("Draw a straight pcb trace between the connected points"),
+  schDisplayLabel: z78.string().optional(),
+  schStroke: z78.string().optional(),
+  highlightColor: z78.string().optional(),
   maxLength: distance19.optional(),
-  maxViaCount: z77.number().int().nonnegative().optional().describe("Maximum number of vias allowed in the PCB trace route"),
-  connectsTo: z77.string().or(z77.array(z77.string())).optional()
+  maxViaCount: z78.number().int().nonnegative().optional().describe("Maximum number of vias allowed in the PCB trace route"),
+  connectsTo: z78.string().or(z78.array(z78.string())).optional()
 });
-var traceProps = z77.union([
+var traceProps = z78.union([
   baseTraceProps.extend({
-    path: z77.array(portRef)
+    path: z78.array(portRef)
   }),
   baseTraceProps.extend({
     from: portRef,
@@ -17832,31 +17870,31 @@ import {
   layer_ref as layer_ref7,
   resistance as resistance3
 } from "circuit-json";
-import { z as z78 } from "zod";
-var busProps = z78.object({
-  name: z78.string().optional(),
-  connections: z78.array(z78.string()).min(1),
-  routingPhaseIndex: z78.number().nullable().optional(),
-  maxLengthSkew: distance20.pipe(z78.number().min(0).finite()).optional(),
-  targetImpedance: resistance3.pipe(z78.number().positive().finite()).optional(),
-  pcbTraceWidth: distance20.pipe(z78.number().positive().finite()).optional(),
-  pcbAllowedLayers: z78.array(layer_ref7).min(1).optional(),
+import { z as z79 } from "zod";
+var busProps = z79.object({
+  name: z79.string().optional(),
+  connections: z79.array(z79.string()).min(1),
+  routingPhaseIndex: z79.number().nullable().optional(),
+  maxLengthSkew: distance20.pipe(z79.number().min(0).finite()).optional(),
+  targetImpedance: resistance3.pipe(z79.number().positive().finite()).optional(),
+  pcbTraceWidth: distance20.pipe(z79.number().positive().finite()).optional(),
+  pcbAllowedLayers: z79.array(layer_ref7).min(1).optional(),
   preferredLayer: layer_ref7.optional(),
-  preferredLayers: z78.array(layer_ref7).min(1).optional()
+  preferredLayers: z79.array(layer_ref7).min(1).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/differentialpair.ts
 import { distance as distance21, resistance as resistance4 } from "circuit-json";
-import { z as z79 } from "zod";
-var differentialPairProps = z79.object({
-  name: z79.string().optional(),
-  positiveConnection: z79.string(),
-  negativeConnection: z79.string(),
-  maxLengthSkew: distance21.pipe(z79.number().min(0).finite()).optional(),
-  targetDifferentialImpedance: resistance4.pipe(z79.number().positive().finite()).optional(),
-  pcbTraceGap: distance21.pipe(z79.number().positive().finite()).optional(),
-  maxUncoupledLength: distance21.pipe(z79.number().min(0).finite()).optional()
+import { z as z80 } from "zod";
+var differentialPairProps = z80.object({
+  name: z80.string().optional(),
+  positiveConnection: z80.string(),
+  negativeConnection: z80.string(),
+  maxLengthSkew: distance21.pipe(z80.number().min(0).finite()).optional(),
+  targetDifferentialImpedance: resistance4.pipe(z80.number().positive().finite()).optional(),
+  pcbTraceGap: distance21.pipe(z80.number().positive().finite()).optional(),
+  maxUncoupledLength: distance21.pipe(z80.number().min(0).finite()).optional()
 });
 expectTypesMatch(true);
 
@@ -17864,8 +17902,8 @@ expectTypesMatch(true);
 import {
   layer_ref as layer_ref8
 } from "circuit-json";
-import { z as z80 } from "zod";
-var footprintInsertionDirection = z80.enum([
+import { z as z81 } from "zod";
+var footprintInsertionDirection = z81.enum([
   "from_left",
   "from_right",
   "from_top",
@@ -17883,11 +17921,11 @@ var footprintInsertionDirection = z80.enum([
   "from_back"
 ]);
 expectTypesMatch(true);
-var footprintProps = z80.object({
-  children: z80.any().optional(),
-  name: z80.string().optional(),
+var footprintProps = z81.object({
+  children: z81.any().optional(),
+  name: z81.string().optional(),
   originalLayer: layer_ref8.default("top").optional(),
-  circuitJson: z80.array(z80.any()).optional(),
+  circuitJson: z81.array(z81.any()).optional(),
   src: footprintProp.describe("Can be a footprint or kicad string").optional(),
   insertionDirection: footprintInsertionDirection.optional().describe(
     "Direction a cable or mating part is attached from, named for the side of the footprint it approaches from, in its unrotated orientation."
@@ -17899,19 +17937,19 @@ var footprintProps = z80.object({
 expectTypesMatch(true);
 
 // lib/components/symbol.ts
-import { z as z81 } from "zod";
-var symbolProps = z81.object({
-  originalFacingDirection: z81.enum(["up", "down", "left", "right"]).default("right").optional(),
+import { z as z82 } from "zod";
+var symbolProps = z82.object({
+  originalFacingDirection: z82.enum(["up", "down", "left", "right"]).default("right").optional(),
   width: distance.optional(),
   height: distance.optional(),
-  name: z81.string().optional()
+  name: z82.string().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/battery.ts
 import { voltage as voltage2 } from "circuit-json";
-import { z as z82 } from "zod";
-var capacity = z82.number().or(z82.string().endsWith("mAh")).transform((v) => {
+import { z as z83 } from "zod";
+var capacity = z83.number().or(z83.string().endsWith("mAh")).transform((v) => {
   if (typeof v === "string") {
     const valString = v.replace("mAh", "");
     const num = Number.parseFloat(valString);
@@ -17926,14 +17964,14 @@ var batteryPins = lrPolarPins;
 var batteryProps = commonComponentProps.extend({
   capacity: capacity.optional(),
   voltage: voltage2.optional(),
-  standard: z82.enum(["AA", "AAA", "9V", "CR2032", "18650", "C"]).optional(),
+  standard: z83.enum(["AA", "AAA", "9V", "CR2032", "18650", "C"]).optional(),
   schOrientation: schematicOrientation.optional(),
   connections: createConnectionsProp(batteryPins).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/mountedboard.ts
-import { z as z83 } from "zod";
+import { z as z84 } from "zod";
 var mountedboardProps = subcircuitGroupProps.extend({
   manufacturerPartNumber: chipProps.shape.manufacturerPartNumber,
   pinLabels: chipProps.shape.pinLabels,
@@ -17945,7 +17983,7 @@ var mountedboardProps = subcircuitGroupProps.extend({
   internallyConnectedPins: chipProps.shape.internallyConnectedPins,
   externallyConnectedPins: chipProps.shape.externallyConnectedPins,
   boardToBoardDistance: distance.optional(),
-  mountOrientation: z83.enum(["faceDown", "faceUp"]).optional()
+  mountOrientation: z84.enum(["faceDown", "faceUp"]).optional()
 });
 expectTypesMatch(true);
 
@@ -17953,40 +17991,40 @@ expectTypesMatch(true);
 import { distance as distance22 } from "circuit-json";
 
 // lib/common/pcbOrientation.ts
-import { z as z84 } from "zod";
-var pcbOrientation = z84.enum(["vertical", "horizontal"]).describe(
+import { z as z85 } from "zod";
+var pcbOrientation = z85.enum(["vertical", "horizontal"]).describe(
   "vertical means pins go 1->2 downward and horizontal means pins go 1->2 rightward"
 );
 expectTypesMatch(true);
 
 // lib/components/pin-header.ts
-import { z as z85 } from "zod";
+import { z as z86 } from "zod";
 var pinHeaderProps = commonComponentProps.extend({
-  pinCount: z85.number(),
+  pinCount: z86.number(),
   pitch: distance22.optional(),
-  schFacingDirection: z85.enum(["up", "down", "left", "right"]).optional(),
-  gender: z85.enum(["male", "female", "unpopulated"]).optional().default("male"),
-  showSilkscreenPinLabels: z85.boolean().optional(),
-  pcbPinLabels: z85.record(z85.string(), z85.string()).optional(),
-  doubleRow: z85.boolean().optional(),
-  rightAngle: z85.boolean().optional(),
+  schFacingDirection: z86.enum(["up", "down", "left", "right"]).optional(),
+  gender: z86.enum(["male", "female", "unpopulated"]).optional().default("male"),
+  showSilkscreenPinLabels: z86.boolean().optional(),
+  pcbPinLabels: z86.record(z86.string(), z86.string()).optional(),
+  doubleRow: z86.boolean().optional(),
+  rightAngle: z86.boolean().optional(),
   pcbOrientation: pcbOrientation.optional(),
   holeDiameter: distance22.optional(),
   platedDiameter: distance22.optional(),
-  pinLabels: z85.record(z85.string(), schematicPinLabel).or(z85.array(schematicPinLabel)).optional(),
-  connections: z85.custom().pipe(z85.record(z85.string(), connectionTarget)).optional(),
-  facingDirection: z85.enum(["left", "right"]).optional(),
+  pinLabels: z86.record(z86.string(), schematicPinLabel).or(z86.array(schematicPinLabel)).optional(),
+  connections: z86.custom().pipe(z86.record(z86.string(), connectionTarget)).optional(),
+  facingDirection: z86.enum(["left", "right"]).optional(),
   schPinArrangement: schematicPinArrangement.optional(),
   schPinStyle: schematicPinStyle.optional(),
   schPinSpacing: distance22.optional(),
   schWidth: distance22.optional(),
   schHeight: distance22.optional(),
-  connectsFromAbove: z85.boolean().optional(),
-  connectsFromBelow: z85.boolean().optional()
+  connectsFromAbove: z86.boolean().optional(),
+  connectsFromBelow: z86.boolean().optional()
 }).superRefine((props, ctx) => {
   if (props.connectsFromAbove && props.connectsFromBelow) {
     ctx.addIssue({
-      code: z85.ZodIssueCode.custom,
+      code: z86.ZodIssueCode.custom,
       message: "connectsFromAbove and connectsFromBelow are opposites; set at most one"
     });
   }
@@ -17997,30 +18035,30 @@ var pinHeaderProps = commonComponentProps.extend({
 expectTypesMatch(true);
 
 // lib/components/netalias.ts
-import { z as z86 } from "zod";
+import { z as z87 } from "zod";
 import { rotation as rotation4 } from "circuit-json";
-var netAliasProps = z86.object({
-  net: z86.string().optional(),
-  connection: z86.string().optional(),
+var netAliasProps = z87.object({
+  net: z87.string().optional(),
+  connection: z87.string().optional(),
   schX: distance.optional(),
   schY: distance.optional(),
   schRotation: rotation4.optional(),
-  anchorSide: z86.enum(["left", "top", "right", "bottom"]).optional()
+  anchorSide: z87.enum(["left", "top", "right", "bottom"]).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/netlabel.ts
-import { z as z87 } from "zod";
+import { z as z88 } from "zod";
 import { rotation as rotation5 } from "circuit-json";
-var netLabelProps = z87.object({
-  net: z87.string().optional(),
-  connection: z87.string().optional(),
-  connectsTo: z87.string().or(z87.array(z87.string())).optional(),
-  inline: z87.boolean().optional(),
+var netLabelProps = z88.object({
+  net: z88.string().optional(),
+  connection: z88.string().optional(),
+  connectsTo: z88.string().or(z88.array(z88.string())).optional(),
+  inline: z88.boolean().optional(),
   schX: distance.optional(),
   schY: distance.optional(),
   schRotation: rotation5.optional(),
-  anchorSide: z87.enum(["left", "top", "right", "bottom"]).optional()
+  anchorSide: z88.enum(["left", "top", "right", "bottom"]).optional()
 });
 expectTypesMatch(true);
 
@@ -18035,32 +18073,32 @@ expectTypesMatch(true);
 
 // lib/components/analogsimulation.ts
 import { ms } from "circuit-json";
-import { z as z89 } from "zod";
-var spiceEngine = z89.custom(
+import { z as z90 } from "zod";
+var spiceEngine = z90.custom(
   (value) => typeof value === "string"
 );
-var spiceOptions = z89.object({
-  method: z89.enum(["trap", "gear"]).optional(),
-  reltol: z89.union([z89.number(), z89.string()]).optional(),
-  abstol: z89.union([z89.number(), z89.string()]).optional(),
-  vntol: z89.union([z89.number(), z89.string()]).optional()
+var spiceOptions = z90.object({
+  method: z90.enum(["trap", "gear"]).optional(),
+  reltol: z90.union([z90.number(), z90.string()]).optional(),
+  abstol: z90.union([z90.number(), z90.string()]).optional(),
+  vntol: z90.union([z90.number(), z90.string()]).optional()
 });
 var analogAnalysisSimulationBaseProps = {
-  name: z89.string().optional(),
+  name: z90.string().optional(),
   spiceEngine: spiceEngine.optional(),
   spiceOptions: spiceOptions.optional(),
-  graphIndependentAxes: z89.boolean().optional(),
-  children: z89.custom().optional()
+  graphIndependentAxes: z90.boolean().optional(),
+  children: z90.custom().optional()
 };
-var analogSimulationProps = z89.object({
-  name: z89.string().optional(),
-  simulationType: z89.literal("spice_transient_analysis").default("spice_transient_analysis"),
+var analogSimulationProps = z90.object({
+  name: z90.string().optional(),
+  simulationType: z90.literal("spice_transient_analysis").default("spice_transient_analysis"),
   duration: ms.optional(),
   startTime: ms.optional(),
   timePerStep: ms.optional(),
   spiceEngine: spiceEngine.optional(),
   spiceOptions: spiceOptions.optional(),
-  graphIndependentAxes: z89.boolean().optional()
+  graphIndependentAxes: z90.boolean().optional()
 });
 expectTypesMatch(
   true
@@ -18068,12 +18106,12 @@ expectTypesMatch(
 
 // lib/components/analogtransientsimulation.ts
 import { ms as ms2 } from "circuit-json";
-import { z as z90 } from "zod";
+import { z as z91 } from "zod";
 var positiveMilliseconds = ms2.refine(
   (milliseconds) => milliseconds > 0,
   "Time must be positive"
 );
-var analogTransientSimulationProps = z90.object({
+var analogTransientSimulationProps = z91.object({
   ...analogAnalysisSimulationBaseProps,
   duration: positiveMilliseconds.default("10ms"),
   startTime: ms2.default("0ms"),
@@ -18081,7 +18119,7 @@ var analogTransientSimulationProps = z90.object({
 }).superRefine((simulation, context) => {
   if (simulation.startTime < 0 || simulation.startTime > simulation.duration) {
     context.addIssue({
-      code: z90.ZodIssueCode.custom,
+      code: z91.ZodIssueCode.custom,
       path: ["startTime"],
       message: "startTime must be between zero and duration"
     });
@@ -18090,19 +18128,19 @@ var analogTransientSimulationProps = z90.object({
 expectTypesMatch(true);
 
 // lib/components/analogdcoperatingpointsimulation.ts
-import { z as z91 } from "zod";
-var analogDcOperatingPointSimulationProps = z91.object({
+import { z as z92 } from "zod";
+var analogDcOperatingPointSimulationProps = z92.object({
   ...analogAnalysisSimulationBaseProps
 });
 expectTypesMatch(true);
 
 // lib/components/analogdcsweepsimulation.ts
 import { current, voltage as voltage3 } from "circuit-json";
-import { z as z92 } from "zod";
-var dcSweepQuantity = z92.union([voltage3, current]);
-var analogDcSweepSimulationProps = z92.object({
+import { z as z93 } from "zod";
+var dcSweepQuantity = z93.union([voltage3, current]);
+var analogDcSweepSimulationProps = z93.object({
   ...analogAnalysisSimulationBaseProps,
-  sweepSource: z92.string().min(1),
+  sweepSource: z93.string().min(1),
   sweepStart: dcSweepQuantity,
   sweepStop: dcSweepQuantity,
   sweepStep: dcSweepQuantity.refine(
@@ -18112,7 +18150,7 @@ var analogDcSweepSimulationProps = z92.object({
 }).superRefine((simulation, context) => {
   if (Math.sign(simulation.sweepStop - simulation.sweepStart) !== Math.sign(simulation.sweepStep)) {
     context.addIssue({
-      code: z92.ZodIssueCode.custom,
+      code: z93.ZodIssueCode.custom,
       path: ["sweepStep"],
       message: "sweepStep must move from sweepStart toward sweepStop"
     });
@@ -18122,10 +18160,10 @@ expectTypesMatch(true);
 
 // lib/components/analogacsweepsimulation.ts
 import { frequency as frequency3 } from "circuit-json";
-import { z as z93 } from "zod";
-var analogAcSweepSimulationProps = z93.object({
+import { z as z94 } from "zod";
+var analogAcSweepSimulationProps = z94.object({
   ...analogAnalysisSimulationBaseProps,
-  sweepType: z93.enum(["linear", "decade", "octave"]),
+  sweepType: z94.enum(["linear", "decade", "octave"]),
   startFrequency: frequency3.refine(
     (startFrequencyHz) => startFrequencyHz > 0,
     "startFrequency must be positive"
@@ -18134,12 +18172,12 @@ var analogAcSweepSimulationProps = z93.object({
     (stopFrequencyHz) => stopFrequencyHz > 0,
     "stopFrequency must be positive"
   ),
-  samplesPerInterval: z93.number().int().positive().optional(),
-  sampleCount: z93.number().int().positive().optional()
+  samplesPerInterval: z94.number().int().positive().optional(),
+  sampleCount: z94.number().int().positive().optional()
 }).superRefine((simulation, context) => {
   if (simulation.stopFrequency <= simulation.startFrequency) {
     context.addIssue({
-      code: z93.ZodIssueCode.custom,
+      code: z94.ZodIssueCode.custom,
       path: ["stopFrequency"],
       message: "stopFrequency must be greater than startFrequency"
     });
@@ -18147,14 +18185,14 @@ var analogAcSweepSimulationProps = z93.object({
   if (simulation.sweepType === "linear") {
     if (simulation.sampleCount === void 0) {
       context.addIssue({
-        code: z93.ZodIssueCode.custom,
+        code: z94.ZodIssueCode.custom,
         path: ["sampleCount"],
         message: "sampleCount is required for a linear AC sweep"
       });
     }
     if (simulation.samplesPerInterval !== void 0) {
       context.addIssue({
-        code: z93.ZodIssueCode.custom,
+        code: z94.ZodIssueCode.custom,
         path: ["samplesPerInterval"],
         message: "samplesPerInterval is only valid for decade or octave sweeps"
       });
@@ -18163,14 +18201,14 @@ var analogAcSweepSimulationProps = z93.object({
   }
   if (simulation.samplesPerInterval === void 0) {
     context.addIssue({
-      code: z93.ZodIssueCode.custom,
+      code: z94.ZodIssueCode.custom,
       path: ["samplesPerInterval"],
       message: "samplesPerInterval is required for decade or octave sweeps"
     });
   }
   if (simulation.sampleCount !== void 0) {
     context.addIssue({
-      code: z93.ZodIssueCode.custom,
+      code: z94.ZodIssueCode.custom,
       path: ["sampleCount"],
       message: "sampleCount is only valid for a linear sweep"
     });
@@ -18186,43 +18224,43 @@ import {
   resistance as resistance5,
   voltage as voltage4
 } from "circuit-json";
-import { z as z94 } from "zod";
-var resistanceSweepQuantity = resistance5.pipe(z94.number());
-var capacitanceSweepQuantity = capacitance4.pipe(z94.number());
-var inductanceSweepQuantity = inductance.pipe(z94.number());
-var voltageSweepQuantity = voltage4.pipe(z94.number());
-var currentSweepQuantity = current2.pipe(z94.number());
+import { z as z95 } from "zod";
+var resistanceSweepQuantity = resistance5.pipe(z95.number());
+var capacitanceSweepQuantity = capacitance4.pipe(z95.number());
+var inductanceSweepQuantity = inductance.pipe(z95.number());
+var voltageSweepQuantity = voltage4.pipe(z95.number());
+var currentSweepQuantity = current2.pipe(z95.number());
 var createAnalogSweepCoordinateProps = (sweepQuantity) => ({
-  name: z94.string().optional(),
-  values: z94.array(sweepQuantity).min(1).optional(),
+  name: z95.string().optional(),
+  values: z95.array(sweepQuantity).min(1).optional(),
   start: sweepQuantity.optional(),
   stop: sweepQuantity.optional(),
   step: sweepQuantity.optional()
 });
-var analogResistanceSweepParameterProps = z94.object({
+var analogResistanceSweepParameterProps = z95.object({
   ...createAnalogSweepCoordinateProps(resistanceSweepQuantity),
-  parameterType: z94.literal("resistance"),
-  resistorRef: z94.string().min(1)
+  parameterType: z95.literal("resistance"),
+  resistorRef: z95.string().min(1)
 }).strict();
-var analogCapacitanceSweepParameterProps = z94.object({
+var analogCapacitanceSweepParameterProps = z95.object({
   ...createAnalogSweepCoordinateProps(capacitanceSweepQuantity),
-  parameterType: z94.literal("capacitance"),
-  capacitorRef: z94.string().min(1)
+  parameterType: z95.literal("capacitance"),
+  capacitorRef: z95.string().min(1)
 }).strict();
-var analogInductanceSweepParameterProps = z94.object({
+var analogInductanceSweepParameterProps = z95.object({
   ...createAnalogSweepCoordinateProps(inductanceSweepQuantity),
-  parameterType: z94.literal("inductance"),
-  inductorRef: z94.string().min(1)
+  parameterType: z95.literal("inductance"),
+  inductorRef: z95.string().min(1)
 }).strict();
-var analogVoltageSweepParameterProps = z94.object({
+var analogVoltageSweepParameterProps = z95.object({
   ...createAnalogSweepCoordinateProps(voltageSweepQuantity),
-  parameterType: z94.literal("voltage"),
-  net: z94.string().min(1)
+  parameterType: z95.literal("voltage"),
+  net: z95.string().min(1)
 }).strict();
-var analogCurrentSweepParameterProps = z94.object({
+var analogCurrentSweepParameterProps = z95.object({
   ...createAnalogSweepCoordinateProps(currentSweepQuantity),
-  parameterType: z94.literal("current"),
-  currentSourceRef: z94.string().min(1)
+  parameterType: z95.literal("current"),
+  currentSourceRef: z95.string().min(1)
 }).strict();
 var validateAnalogSweepCoordinates = (sweepCoordinates, context) => {
   const hasExplicitSweepCoordinates = sweepCoordinates.values !== void 0;
@@ -18234,34 +18272,34 @@ var validateAnalogSweepCoordinates = (sweepCoordinates, context) => {
   const hasRangeCoordinates = rangeCoordinateCount > 0;
   if (hasExplicitSweepCoordinates === hasRangeCoordinates) {
     context.addIssue({
-      code: z94.ZodIssueCode.custom,
+      code: z95.ZodIssueCode.custom,
       message: "Provide either values or start/stop/step"
     });
     return;
   }
   if (rangeCoordinateCount !== 0 && rangeCoordinateCount !== 3) {
     context.addIssue({
-      code: z94.ZodIssueCode.custom,
+      code: z95.ZodIssueCode.custom,
       message: "start, stop, and step must be provided together"
     });
     return;
   }
   if (sweepCoordinates.step === 0) {
     context.addIssue({
-      code: z94.ZodIssueCode.custom,
+      code: z95.ZodIssueCode.custom,
       path: ["step"],
       message: "step must be nonzero"
     });
   }
   if (sweepCoordinates.start !== void 0 && sweepCoordinates.stop !== void 0 && sweepCoordinates.step !== void 0 && Math.sign(sweepCoordinates.stop - sweepCoordinates.start) !== Math.sign(sweepCoordinates.step)) {
     context.addIssue({
-      code: z94.ZodIssueCode.custom,
+      code: z95.ZodIssueCode.custom,
       path: ["step"],
       message: "step must move from start toward stop"
     });
   }
 };
-var analogSweepParameterProps = z94.discriminatedUnion("parameterType", [
+var analogSweepParameterProps = z95.discriminatedUnion("parameterType", [
   analogResistanceSweepParameterProps,
   analogCapacitanceSweepParameterProps,
   analogInductanceSweepParameterProps,
@@ -18276,26 +18314,26 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // lib/components/autoroutingphase.ts
-import { z as z95 } from "zod";
-var autoroutingPhaseProps = z95.object({
-  key: z95.any().optional(),
-  name: z95.string().optional(),
+import { z as z96 } from "zod";
+var autoroutingPhaseProps = z96.object({
+  key: z96.any().optional(),
+  name: z96.string().optional(),
   autorouter: autorouterProp.optional(),
   algorithmFn: autorouterConfig.shape.algorithmFn,
   preflightRoutingCheckPolicy: preflightRoutingCheckPolicy.optional(),
-  phaseIndex: z95.number().optional(),
-  pcbTracePaths: z95.array(fanoutTracePath).optional(),
+  phaseIndex: z96.number().optional(),
+  pcbTracePaths: z96.array(fanoutTracePath).optional(),
   ...routingTolerances.shape,
-  region: z95.object({
-    shape: z95.literal("rect").optional(),
-    minX: z95.number(),
-    maxX: z95.number(),
-    minY: z95.number(),
-    maxY: z95.number()
+  region: z96.object({
+    shape: z96.literal("rect").optional(),
+    minX: z96.number(),
+    maxX: z96.number(),
+    minY: z96.number(),
+    maxY: z96.number()
   }).optional(),
-  connection: z95.string().optional(),
-  connections: z95.array(z95.string()).optional(),
-  reroute: z95.boolean().optional(),
+  connection: z96.string().optional(),
+  connections: z96.array(z96.string()).optional(),
+  reroute: z96.boolean().optional(),
   ...fanoutProps.shape
 }).superRefine((value, ctx) => {
   const isSimplifyAutorouter = value.autorouter === "simplify" || typeof value.autorouter === "object" && value.autorouter?.preset === "simplify";
@@ -18306,7 +18344,7 @@ var autoroutingPhaseProps = z95.object({
   }
   if (value.reroute !== void 0 && !(isSimplifyAutorouter && value.reroute === true) && value.region === void 0 && value.connection === void 0 && value.connections === void 0) {
     ctx.addIssue({
-      code: z95.ZodIssueCode.custom,
+      code: z96.ZodIssueCode.custom,
       message: "region, connection, or connections is required when reroute is provided",
       path: ["region"]
     });
@@ -18315,15 +18353,15 @@ var autoroutingPhaseProps = z95.object({
 expectTypesMatch(true);
 
 // lib/components/spicemodel.ts
-import { z as z96 } from "zod";
-var spicemodelProps = z96.object({
-  source: z96.string(),
-  spicePinMapping: z96.record(z96.string(), z96.string()).optional()
+import { z as z97 } from "zod";
+var spicemodelProps = z97.object({
+  source: z97.string(),
+  spicePinMapping: z97.record(z97.string(), z97.string()).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/transistor.ts
-import { z as z97 } from "zod";
+import { z as z98 } from "zod";
 var transistorPinsLabels = [
   "pin1",
   "pin2",
@@ -18336,7 +18374,7 @@ var transistorPinsLabels = [
   "drain"
 ];
 var transistorProps = commonComponentProps.extend({
-  type: z97.enum(["npn", "pnp", "bjt", "jfet", "mosfet", "igbt"]),
+  type: z98.enum(["npn", "pnp", "bjt", "jfet", "mosfet", "igbt"]),
   connections: createConnectionsProp(transistorPinsLabels).optional()
 });
 var transistorPins = [
@@ -18350,7 +18388,7 @@ var transistorPins = [
 expectTypesMatch(true);
 
 // lib/components/mosfet.ts
-import { z as z98 } from "zod";
+import { z as z99 } from "zod";
 var mosfetPins = [
   "pin1",
   "drain",
@@ -18360,11 +18398,11 @@ var mosfetPins = [
   "gate"
 ];
 var mosfetProps = commonComponentProps.extend({
-  channelType: z98.enum(["n", "p"]),
-  mosfetMode: z98.enum(["enhancement", "depletion"]),
-  symbolDrainSide: z98.enum(["left", "right", "top", "bottom"]).optional(),
-  symbolSourceSide: z98.enum(["left", "right", "top", "bottom"]).optional(),
-  symbolGateSide: z98.enum(["left", "right", "top", "bottom"]).optional(),
+  channelType: z99.enum(["n", "p"]),
+  mosfetMode: z99.enum(["enhancement", "depletion"]),
+  symbolDrainSide: z99.enum(["left", "right", "top", "bottom"]).optional(),
+  symbolSourceSide: z99.enum(["left", "right", "top", "bottom"]).optional(),
+  symbolGateSide: z99.enum(["left", "right", "top", "bottom"]).optional(),
   connections: createConnectionsProp(mosfetPins).optional()
 });
 expectTypesMatch(true);
@@ -18386,29 +18424,29 @@ expectTypesMatch(true);
 
 // lib/components/inductor.ts
 import { inductance as inductance2 } from "circuit-json";
-import { z as z100 } from "zod";
+import { z as z101 } from "zod";
 var inductorPins = lrPins;
 var inductorProps = commonComponentProps.extend({
   inductance: inductance2,
-  maxCurrentRating: z100.union([z100.string(), z100.number()]).optional(),
+  maxCurrentRating: z101.union([z101.string(), z101.number()]).optional(),
   schOrientation: schematicOrientation.optional(),
   connections: createConnectionsProp(inductorPins).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/internal-circuit.ts
-import { z as z101 } from "zod";
-var internalCircuitProps = z101.object({
-  children: z101.custom().optional()
+import { z as z102 } from "zod";
+var internalCircuitProps = z102.object({
+  children: z102.custom().optional()
 });
 expectTypesMatch(
   true
 );
 
 // lib/components/diode.ts
-import { z as z102 } from "zod";
+import { z as z103 } from "zod";
 var diodePins = lrPolarPins;
-var diodeConnectionKeys = z102.enum([
+var diodeConnectionKeys = z103.enum([
   "anode",
   "cathode",
   "pin1",
@@ -18416,13 +18454,13 @@ var diodeConnectionKeys = z102.enum([
   "pos",
   "neg"
 ]);
-var connectionTarget3 = z102.string().or(z102.array(z102.string()).readonly()).or(z102.array(z102.string()));
-var connectionsProp2 = z102.record(diodeConnectionKeys, connectionTarget3);
-var diodePinLabelsProp = z102.record(
-  z102.enum(diodePins),
-  schematicPinLabel.or(z102.array(schematicPinLabel).readonly()).or(z102.array(schematicPinLabel))
+var connectionTarget3 = z103.string().or(z103.array(z103.string()).readonly()).or(z103.array(z103.string()));
+var connectionsProp2 = z103.record(diodeConnectionKeys, connectionTarget3);
+var diodePinLabelsProp = z103.record(
+  z103.enum(diodePins),
+  schematicPinLabel.or(z103.array(schematicPinLabel).readonly()).or(z103.array(schematicPinLabel))
 );
-var diodeVariant = z102.enum([
+var diodeVariant = z103.enum([
   "standard",
   "schottky",
   "zener",
@@ -18433,12 +18471,12 @@ var diodeVariant = z102.enum([
 var diodeProps = commonComponentProps.extend({
   connections: connectionsProp2.optional(),
   variant: diodeVariant.optional().default("standard"),
-  standard: z102.boolean().optional(),
-  schottky: z102.boolean().optional(),
-  zener: z102.boolean().optional(),
-  avalanche: z102.boolean().optional(),
-  photo: z102.boolean().optional(),
-  tvs: z102.boolean().optional(),
+  standard: z103.boolean().optional(),
+  schottky: z103.boolean().optional(),
+  zener: z103.boolean().optional(),
+  avalanche: z103.boolean().optional(),
+  photo: z103.boolean().optional(),
+  tvs: z103.boolean().optional(),
   schOrientation: schematicOrientation.optional(),
   schSize: schematicSymbolSize.optional(),
   pinLabels: diodePinLabelsProp.optional()
@@ -18453,11 +18491,11 @@ var diodeProps = commonComponentProps.extend({
   ].filter(Boolean).length;
   if (enabledFlags > 1) {
     ctx.addIssue({
-      code: z102.ZodIssueCode.custom,
+      code: z103.ZodIssueCode.custom,
       message: "Exactly one diode variant must be enabled",
       path: []
     });
-    return z102.INVALID;
+    return z103.INVALID;
   }
 }).transform((data) => {
   const result = {
@@ -18503,18 +18541,18 @@ var diodeProps = commonComponentProps.extend({
 expectTypesMatch(true);
 
 // lib/components/led.ts
-import { z as z103 } from "zod";
-var legacyNumericLedPinLabelsProp = z103.record(
-  z103.enum(["1", "2"]),
-  schematicPinLabel.or(z103.array(schematicPinLabel).readonly()).or(z103.array(schematicPinLabel))
+import { z as z104 } from "zod";
+var legacyNumericLedPinLabelsProp = z104.record(
+  z104.enum(["1", "2"]),
+  schematicPinLabel.or(z104.array(schematicPinLabel).readonly()).or(z104.array(schematicPinLabel))
 ).transform((pinLabels) => ({
   ...pinLabels["1"] === void 0 ? {} : { pin1: pinLabels["1"] },
   ...pinLabels["2"] === void 0 ? {} : { pin2: pinLabels["2"] }
 }));
 var ledProps = commonComponentProps.extend({
-  color: z103.string().optional(),
-  wavelength: z103.string().optional(),
-  schDisplayValue: z103.string().optional(),
+  color: z104.string().optional(),
+  wavelength: z104.string().optional(),
+  schDisplayValue: z104.string().optional(),
   schOrientation: schematicOrientation.optional(),
   /** Select a compact schematic symbol; omitted, default, and md retain the standard symbol. */
   schSize: schematicSymbolSize.optional(),
@@ -18522,28 +18560,28 @@ var ledProps = commonComponentProps.extend({
   // wrappers, then normalized to the canonical pin1/pin2 representation.
   pinLabels: diodePinLabelsProp.or(legacyNumericLedPinLabelsProp).optional(),
   connections: createConnectionsProp(lrPolarPins).optional(),
-  laser: z103.boolean().optional()
+  laser: z104.boolean().optional()
 });
 var ledPins = lrPolarPins;
 
 // lib/components/switch.ts
 import { ms as ms3, frequency as frequency4 } from "circuit-json";
-import { z as z104 } from "zod";
+import { z as z105 } from "zod";
 var switchProps = commonComponentProps.extend({
-  type: z104.enum(["spst", "spdt", "dpst", "dpdt"]).optional(),
-  isNormallyClosed: z104.boolean().optional().default(false),
-  spst: z104.boolean().optional(),
-  spdt: z104.boolean().optional(),
-  dpst: z104.boolean().optional(),
-  dpdt: z104.boolean().optional(),
+  type: z105.enum(["spst", "spdt", "dpst", "dpdt"]).optional(),
+  isNormallyClosed: z105.boolean().optional().default(false),
+  spst: z105.boolean().optional(),
+  spdt: z105.boolean().optional(),
+  dpst: z105.boolean().optional(),
+  dpdt: z105.boolean().optional(),
   pinLabels: pinLabelsProp.optional(),
   noConnect: noConnectProp.optional(),
   simSwitchFrequency: frequency4.optional(),
   simCloseAt: ms3.optional(),
   simOpenAt: ms3.optional(),
-  simStartClosed: z104.boolean().optional(),
-  simStartOpen: z104.boolean().optional(),
-  connections: z104.custom().pipe(z104.record(z104.string(), connectionTarget)).optional()
+  simStartClosed: z105.boolean().optional(),
+  simStartOpen: z105.boolean().optional(),
+  connections: z105.custom().pipe(z105.record(z105.string(), connectionTarget)).optional()
 }).transform((props) => {
   const updatedProps = { ...props };
   if (updatedProps.dpdt) {
@@ -18575,33 +18613,33 @@ expectTypesMatch(true);
 
 // lib/components/fabrication-note-text.ts
 import { length as length4 } from "circuit-json";
-import { z as z105 } from "zod";
+import { z as z106 } from "zod";
 var fabricationNoteTextProps = pcbLayoutProps.extend({
-  text: z105.string(),
-  anchorAlignment: z105.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  font: z105.enum(["tscircuit2024"]).optional(),
+  text: z106.string(),
+  anchorAlignment: z106.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  font: z106.enum(["tscircuit2024"]).optional(),
   fontSize: length4.optional(),
-  color: z105.string().optional()
+  color: z106.string().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/fabrication-note-rect.ts
 import { distance as distance23 } from "circuit-json";
-import { z as z106 } from "zod";
+import { z as z107 } from "zod";
 var fabricationNoteRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
   width: distance23,
   height: distance23,
   strokeWidth: distance23.optional(),
-  isFilled: z106.boolean().optional(),
-  hasStroke: z106.boolean().optional(),
-  isStrokeDashed: z106.boolean().optional(),
-  color: z106.string().optional(),
+  isFilled: z107.boolean().optional(),
+  hasStroke: z107.boolean().optional(),
+  isStrokeDashed: z107.boolean().optional(),
+  color: z107.string().optional(),
   cornerRadius: distance23.optional()
 });
 
 // lib/components/fabrication-note-path.ts
 import { length as length5, route_hint_point as route_hint_point3 } from "circuit-json";
-import { z as z107 } from "zod";
+import { z as z108 } from "zod";
 var fabricationNotePathProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -18613,15 +18651,15 @@ var fabricationNotePathProps = pcbLayoutProps.omit({
   pcbOffsetY: true,
   pcbRotation: true
 }).extend({
-  route: z107.array(route_hint_point3),
+  route: z108.array(route_hint_point3),
   strokeWidth: length5.optional(),
-  color: z107.string().optional()
+  color: z108.string().optional()
 });
 
 // lib/components/fabrication-note-dimension.ts
 import { distance as distance24, length as length6 } from "circuit-json";
-import { z as z108 } from "zod";
-var dimensionTarget = z108.union([z108.string(), point]);
+import { z as z109 } from "zod";
+var dimensionTarget = z109.union([z109.string(), point]);
 var fabricationNoteDimensionProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -18635,44 +18673,44 @@ var fabricationNoteDimensionProps = pcbLayoutProps.omit({
 }).extend({
   from: dimensionTarget,
   to: dimensionTarget,
-  text: z108.string().optional(),
+  text: z109.string().optional(),
   offset: distance24.optional(),
-  offsetDirection: z108.object({ x: z108.number().finite(), y: z108.number().finite() }).optional(),
-  font: z108.enum(["tscircuit2024"]).optional(),
+  offsetDirection: z109.object({ x: z109.number().finite(), y: z109.number().finite() }).optional(),
+  font: z109.enum(["tscircuit2024"]).optional(),
   fontSize: length6.optional(),
-  color: z108.string().optional(),
+  color: z109.string().optional(),
   arrowSize: distance24.optional(),
-  units: z108.enum(["in", "mm"]).optional(),
-  outerEdgeToEdge: z108.literal(true).optional(),
-  centerToCenter: z108.literal(true).optional(),
-  innerEdgeToEdge: z108.literal(true).optional()
+  units: z109.enum(["in", "mm"]).optional(),
+  outerEdgeToEdge: z109.literal(true).optional(),
+  centerToCenter: z109.literal(true).optional(),
+  innerEdgeToEdge: z109.literal(true).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/pcb-trace.ts
 import { distance as distance25, route_hint_point as route_hint_point4 } from "circuit-json";
-import { z as z109 } from "zod";
-var pcbTraceProps = z109.object({
-  layer: z109.string().optional(),
+import { z as z110 } from "zod";
+var pcbTraceProps = z110.object({
+  layer: z110.string().optional(),
   thickness: distance25.optional(),
-  route: z109.array(route_hint_point4)
+  route: z110.array(route_hint_point4)
 });
 
 // lib/components/via.ts
 import { distance as distance26, layer_ref as layer_ref9 } from "circuit-json";
-import { z as z110 } from "zod";
+import { z as z111 } from "zod";
 var viaProps = commonLayoutProps.extend({
-  name: z110.string().optional(),
+  name: z111.string().optional(),
   fromLayer: layer_ref9.optional(),
   toLayer: layer_ref9.optional(),
   holeDiameter: distance26.optional(),
   outerDiameter: distance26.optional(),
-  layers: z110.array(layer_ref9).optional(),
-  connectsTo: z110.string().or(z110.array(z110.string())).optional(),
-  netIsAssignable: z110.boolean().optional(),
-  tented: z110.union([
-    z110.boolean(),
-    z110.enum([
+  layers: z111.array(layer_ref9).optional(),
+  connectsTo: z111.string().or(z111.array(z111.string())).optional(),
+  netIsAssignable: z111.boolean().optional(),
+  tented: z111.union([
+    z111.boolean(),
+    z111.enum([
       "both_sides",
       "top_and_bottom_tented",
       "top_tented",
@@ -18691,15 +18729,15 @@ expectTypesMatch(true);
 
 // lib/components/testpoint.ts
 import { distance as distance27 } from "circuit-json";
-import { z as z111 } from "zod";
+import { z as z112 } from "zod";
 var testpointPins = ["pin1"];
-var testpointConnectionsProp = z111.object({
+var testpointConnectionsProp = z112.object({
   pin1: connectionTarget
 }).strict();
 var testpointProps = commonComponentProps.extend({
   connections: testpointConnectionsProp.optional(),
-  footprintVariant: z111.enum(["pad", "through_hole"]).optional(),
-  padShape: z111.enum(["rect", "circle"]).optional().default("circle"),
+  footprintVariant: z112.enum(["pad", "through_hole"]).optional(),
+  padShape: z112.enum(["rect", "circle"]).optional().default("circle"),
   padDiameter: distance27.optional(),
   holeDiameter: distance27.optional(),
   width: distance27.optional(),
@@ -18711,42 +18749,42 @@ var testpointProps = commonComponentProps.extend({
 expectTypesMatch(true);
 
 // lib/components/breakoutpoint.ts
-import { z as z112 } from "zod";
+import { z as z113 } from "zod";
 var breakoutPointProps = pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
-  connection: z112.string()
+  connection: z113.string()
 });
 expectTypesMatch(true);
 
 // lib/components/pcb-keepout.ts
 import { distance as distance28, layer_ref as layer_ref10 } from "circuit-json";
-import { z as z113 } from "zod";
-var pcbKeepoutProps = z113.union([
+import { z as z114 } from "zod";
+var pcbKeepoutProps = z114.union([
   pcbLayoutProps.omit({ pcbRotation: true }).extend({
-    shape: z113.literal("circle"),
+    shape: z114.literal("circle"),
     radius: distance28,
-    layers: z113.array(layer_ref10).optional(),
+    layers: z114.array(layer_ref10).optional(),
     /** Report keepout violations as warnings when true. Omit for normal enforcement. */
-    warningOnly: z113.boolean().optional(),
+    warningOnly: z114.boolean().optional(),
     /** Allow trace crossings without keepout diagnostics. False or omitted retains enforcement; copper pours remain excluded. */
-    allowTraces: z113.boolean().optional(),
+    allowTraces: z114.boolean().optional(),
     /** Allow components and their pads/plated holes without keepout diagnostics. False or omitted retains enforcement; copper pours remain excluded. */
-    allowPlacements: z113.boolean().optional(),
-    excludeRefs: z113.array(z113.string()).optional().describe(
+    allowPlacements: z114.boolean().optional(),
+    excludeRefs: z114.array(z114.string()).optional().describe(
       'Component selectors excluded from the keepout, such as ".ANT1"'
     )
   }),
   pcbLayoutProps.extend({
-    shape: z113.literal("rect"),
+    shape: z114.literal("rect"),
     width: distance28,
     height: distance28,
-    layers: z113.array(layer_ref10).optional(),
+    layers: z114.array(layer_ref10).optional(),
     /** Report keepout violations as warnings when true. Omit for normal enforcement. */
-    warningOnly: z113.boolean().optional(),
+    warningOnly: z114.boolean().optional(),
     /** Allow trace crossings without keepout diagnostics. False or omitted retains enforcement; copper pours remain excluded. */
-    allowTraces: z113.boolean().optional(),
+    allowTraces: z114.boolean().optional(),
     /** Allow components and their pads/plated holes without keepout diagnostics. False or omitted retains enforcement; copper pours remain excluded. */
-    allowPlacements: z113.boolean().optional(),
-    excludeRefs: z113.array(z113.string()).optional().describe(
+    allowPlacements: z114.boolean().optional(),
+    excludeRefs: z114.array(z114.string()).optional().describe(
       'Component selectors excluded from the keepout, such as ".ANT1"'
     )
   })
@@ -18754,20 +18792,20 @@ var pcbKeepoutProps = z113.union([
 
 // lib/components/courtyard-rect.ts
 import { distance as distance29 } from "circuit-json";
-import { z as z114 } from "zod";
+import { z as z115 } from "zod";
 var courtyardRectProps = pcbLayoutProps.extend({
   width: distance29,
   height: distance29,
   strokeWidth: distance29.optional(),
-  isFilled: z114.boolean().optional(),
-  hasStroke: z114.boolean().optional(),
-  isStrokeDashed: z114.boolean().optional(),
-  color: z114.string().optional()
+  isFilled: z115.boolean().optional(),
+  hasStroke: z115.boolean().optional(),
+  isStrokeDashed: z115.boolean().optional(),
+  color: z115.string().optional()
 });
 
 // lib/components/courtyard-outline.ts
 import { length as length7 } from "circuit-json";
-import { z as z115 } from "zod";
+import { z as z116 } from "zod";
 var courtyardOutlineProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -18779,11 +18817,11 @@ var courtyardOutlineProps = pcbLayoutProps.omit({
   pcbOffsetY: true,
   pcbRotation: true
 }).extend({
-  outline: z115.array(point),
+  outline: z116.array(point),
   strokeWidth: length7.optional(),
-  isClosed: z115.boolean().optional(),
-  isStrokeDashed: z115.boolean().optional(),
-  color: z115.string().optional()
+  isClosed: z116.boolean().optional(),
+  isStrokeDashed: z116.boolean().optional(),
+  color: z116.string().optional()
 });
 
 // lib/components/courtyard-circle.ts
@@ -18803,13 +18841,13 @@ var courtyardPillProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
 });
 
 // lib/components/copper-pour.ts
-import { z as z118 } from "zod";
+import { z as z119 } from "zod";
 import { layer_ref as layer_ref11 } from "circuit-json";
-var copperPourProps = z118.object({
-  name: z118.string().optional(),
+var copperPourProps = z119.object({
+  name: z119.string().optional(),
   layer: layer_ref11,
-  connectsTo: z118.string(),
-  unbroken: z118.boolean().optional().describe(
+  connectsTo: z119.string(),
+  unbroken: z119.boolean().optional().describe(
     "Reserves the pour region during autorouting so unrelated traces do not split it. Vias may still cross the region using antipads."
   ),
   padMargin: distance.optional(),
@@ -18817,24 +18855,24 @@ var copperPourProps = z118.object({
   clearance: distance.optional(),
   boardEdgeMargin: distance.optional(),
   cutoutMargin: distance.optional(),
-  useThermalReliefs: z118.boolean().optional(),
-  outline: z118.array(point).optional(),
-  coveredWithSolderMask: z118.boolean().optional().default(true)
+  useThermalReliefs: z119.boolean().optional(),
+  outline: z119.array(point).optional(),
+  coveredWithSolderMask: z119.boolean().optional().default(true)
 });
 expectTypesMatch(true);
 
 // lib/components/cadassembly.ts
 import { layer_ref as layer_ref12 } from "circuit-json";
-import { z as z119 } from "zod";
-var cadassemblyProps = z119.object({
+import { z as z120 } from "zod";
+var cadassemblyProps = z120.object({
   originalLayer: layer_ref12.default("top").optional(),
-  children: z119.any().optional()
+  children: z120.any().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/cadmodel.ts
-import { z as z120 } from "zod";
-var pcbPosition = z120.object({
+import { z as z121 } from "zod";
+var pcbPosition = z121.object({
   pcbX: pcbCoordinate.optional(),
   pcbY: pcbCoordinate.optional(),
   pcbLeftEdgeX: pcbCoordinate.optional(),
@@ -18851,7 +18889,7 @@ var cadModelBaseWithUrl = cadModelBase.extend({
 });
 var cadModelObject = cadModelBaseWithUrl.merge(pcbPosition);
 expectTypesMatch(true);
-var cadmodelProps = z120.union([z120.null(), url, cadModelObject]);
+var cadmodelProps = z121.union([z121.null(), url, cadModelObject]);
 
 // lib/components/power-source.ts
 import { voltage as voltage5 } from "circuit-json";
@@ -18861,9 +18899,9 @@ var powerSourceProps = commonComponentProps.extend({
 
 // lib/components/voltagesource.ts
 import { frequency as frequency5, ms as ms4, rotation as rotation6, voltage as voltage6 } from "circuit-json";
-import { z as z121 } from "zod";
+import { z as z122 } from "zod";
 var voltageSourcePinLabels = ["pin1", "pin2", "pos", "neg"];
-var percentage = z121.union([z121.string(), z121.number()]).transform((val) => {
+var percentage = z122.union([z122.string(), z122.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -18872,13 +18910,13 @@ var percentage = z121.union([z121.string(), z121.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z121.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z122.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
 var voltageSourceProps = commonComponentProps.extend({
   voltage: voltage6.optional(),
   frequency: frequency5.optional(),
   peakToPeakVoltage: voltage6.optional(),
-  waveShape: z121.enum(["sinewave", "square", "triangle", "sawtooth"]).optional(),
+  waveShape: z122.enum(["sinewave", "square", "triangle", "sawtooth"]).optional(),
   phase: rotation6.optional(),
   dutyCycle: percentage.optional(),
   pulseDelay: ms4.optional(),
@@ -18895,9 +18933,9 @@ expectTypesMatch(true);
 
 // lib/components/currentsource.ts
 import { frequency as frequency6, rotation as rotation7, current as current3 } from "circuit-json";
-import { z as z122 } from "zod";
+import { z as z123 } from "zod";
 var currentSourcePinLabels = ["pin1", "pin2", "pos", "neg"];
-var percentage2 = z122.union([z122.string(), z122.number()]).transform((val) => {
+var percentage2 = z123.union([z123.string(), z123.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -18906,13 +18944,13 @@ var percentage2 = z122.union([z122.string(), z122.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z122.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z123.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
 var currentSourceProps = commonComponentProps.extend({
   current: current3.optional(),
   frequency: frequency6.optional(),
   peakToPeakCurrent: current3.optional(),
-  waveShape: z122.enum(["sinewave", "square", "triangle", "sawtooth"]).optional(),
+  waveShape: z123.enum(["sinewave", "square", "triangle", "sawtooth"]).optional(),
   phase: rotation7.optional(),
   dutyCycle: percentage2.optional(),
   acMagnitude: current3.optional(),
@@ -18923,21 +18961,21 @@ var currentSourcePins = lrPolarPins;
 expectTypesMatch(true);
 
 // lib/components/voltageprobe.ts
-import { z as z123 } from "zod";
+import { z as z124 } from "zod";
 var voltageProbeProps = commonComponentProps.omit({ name: true }).extend({
-  name: z123.string().optional(),
-  connectsTo: z123.string(),
-  referenceTo: z123.string().optional(),
-  color: z123.string().optional(),
-  graphDisplayName: z123.string().optional(),
-  graphCenter: z123.number().optional(),
-  graphVerticalOffset: z123.number().or(z123.string()).optional(),
-  graphVoltagePerDiv: z123.number().or(z123.string()).optional()
+  name: z124.string().optional(),
+  connectsTo: z124.string(),
+  referenceTo: z124.string().optional(),
+  color: z124.string().optional(),
+  graphDisplayName: z124.string().optional(),
+  graphCenter: z124.number().optional(),
+  graphVerticalOffset: z124.number().or(z124.string()).optional(),
+  graphVoltagePerDiv: z124.number().or(z124.string()).optional()
 });
 expectTypesMatch(true);
 
 // lib/components/ammeter.ts
-import { z as z124 } from "zod";
+import { z as z125 } from "zod";
 var ammeterPinLabels = ["pin1", "pin2", "pos", "neg"];
 var hasAmmeterConnectionPair = (connections) => {
   return connections.pos !== void 0 && connections.neg !== void 0 || connections.pin1 !== void 0 && connections.pin2 !== void 0;
@@ -18947,64 +18985,64 @@ var ammeterProps = commonComponentProps.extend({
     hasAmmeterConnectionPair,
     "Ammeter connections must include either pos/neg or pin1/pin2"
   ),
-  color: z124.string().optional(),
-  graphDisplayName: z124.string().optional(),
-  graphCenter: z124.number().optional(),
-  graphVerticalOffset: z124.number().or(z124.string()).optional(),
-  graphCurrentPerDiv: z124.number().or(z124.string()).optional()
+  color: z125.string().optional(),
+  graphDisplayName: z125.string().optional(),
+  graphCenter: z125.number().optional(),
+  graphVerticalOffset: z125.number().or(z125.string()).optional(),
+  graphCurrentPerDiv: z125.number().or(z125.string()).optional()
 });
 var ammeterPins = ammeterPinLabels;
 expectTypesMatch(true);
 
 // lib/components/schematic-arc.ts
 import { distance as distance32, point as point5, rotation as rotation8 } from "circuit-json";
-import { z as z125 } from "zod";
-var schematicArcProps = z125.object({
+import { z as z126 } from "zod";
+var schematicArcProps = z126.object({
   center: point5,
   radius: distance32,
   startAngleDegrees: rotation8,
   endAngleDegrees: rotation8,
-  direction: z125.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
+  direction: z126.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
   strokeWidth: distance32.optional(),
-  color: z125.string().optional(),
-  isDashed: z125.boolean().optional().default(false)
+  color: z126.string().optional(),
+  isDashed: z126.boolean().optional().default(false)
 });
 expectTypesMatch(true);
 
 // lib/components/toolingrail.ts
-import { z as z126 } from "zod";
-var toolingrailProps = z126.object({
-  children: z126.any().optional()
+import { z as z127 } from "zod";
+var toolingrailProps = z127.object({
+  children: z127.any().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-box.ts
 import { distance as distance33 } from "circuit-json";
-import { z as z127 } from "zod";
-var schematicBoxProps = z127.object({
-  name: z127.string().optional(),
-  chipRef: z127.string().optional(),
+import { z as z128 } from "zod";
+var schematicBoxProps = z128.object({
+  name: z128.string().optional(),
+  chipRef: z128.string().optional(),
   pinLabels: pinLabelsProp.optional(),
   schPinArrangement: schematicPinArrangement.optional(),
   schPinStyle: schematicPinStyle.optional(),
   schX: distance33.optional(),
   schY: distance33.optional(),
-  schSectionName: z127.string().optional(),
-  schSheetName: z127.string().optional(),
+  schSectionName: z128.string().optional(),
+  schSheetName: z128.string().optional(),
   width: distance33.optional(),
   height: distance33.optional(),
-  overlay: z127.array(z127.string()).optional(),
+  overlay: z128.array(z128.string()).optional(),
   padding: distance33.optional(),
   paddingLeft: distance33.optional(),
   paddingRight: distance33.optional(),
   paddingTop: distance33.optional(),
   paddingBottom: distance33.optional(),
-  title: z127.string().optional(),
+  title: z128.string().optional(),
   titleAlignment: ninePointAnchor.default("top_left"),
-  titleColor: z127.string().optional(),
+  titleColor: z128.string().optional(),
   titleFontSize: distance33.optional(),
-  titleInside: z127.boolean().default(false),
-  strokeStyle: z127.enum(["solid", "dashed"]).default("solid")
+  titleInside: z128.boolean().default(false),
+  strokeStyle: z128.enum(["solid", "dashed"]).default("solid")
 }).refine(
   (elm) => elm.width !== void 0 && elm.height !== void 0 || Array.isArray(elm.overlay) && elm.overlay.length > 0,
   {
@@ -19020,21 +19058,21 @@ expectTypesMatch(true);
 
 // lib/components/schematic-symbol.ts
 import { rotation as rotation9 } from "circuit-json";
-import { z as z128 } from "zod";
-var schematicSymbolConnections = z128.custom().pipe(z128.record(z128.string(), connectionTarget)).refine((value) => Object.keys(value).length > 0, {
+import { z as z129 } from "zod";
+var schematicSymbolConnections = z129.custom().pipe(z129.record(z129.string(), connectionTarget)).refine((value) => Object.keys(value).length > 0, {
   message: "connections must map at least one schematic symbol port"
 });
-var schematicSymbolProps = z128.object({
-  name: z128.string().min(1),
-  displayName: z128.string().optional(),
-  chipRef: z128.string().min(1).optional(),
-  symbolName: z128.string().min(1),
+var schematicSymbolProps = z129.object({
+  name: z129.string().min(1),
+  displayName: z129.string().optional(),
+  chipRef: z129.string().min(1).optional(),
+  symbolName: z129.string().min(1),
   connections: schematicSymbolConnections.optional(),
   schX: distance.optional(),
   schY: distance.optional(),
   schRotation: rotation9.optional(),
-  schSectionName: z128.string().optional(),
-  schSheetName: z128.string().optional()
+  schSectionName: z129.string().optional(),
+  schSheetName: z129.string().optional()
 });
 expectTypesMatch(
   true
@@ -19042,15 +19080,15 @@ expectTypesMatch(
 
 // lib/components/schematic-circle.ts
 import { distance as distance34, point as point6 } from "circuit-json";
-import { z as z129 } from "zod";
-var schematicCircleProps = z129.object({
+import { z as z130 } from "zod";
+var schematicCircleProps = z130.object({
   center: point6,
   radius: distance34,
   strokeWidth: distance34.optional(),
-  color: z129.string().optional(),
-  isFilled: z129.boolean().optional().default(false),
-  fillColor: z129.string().optional(),
-  isDashed: z129.boolean().optional().default(false)
+  color: z130.string().optional(),
+  isFilled: z130.boolean().optional().default(false),
+  fillColor: z130.string().optional(),
+  isDashed: z130.boolean().optional().default(false)
 });
 expectTypesMatch(
   true
@@ -19058,32 +19096,32 @@ expectTypesMatch(
 
 // lib/components/schematic-rect.ts
 import { distance as distance35, rotation as rotation10 } from "circuit-json";
-import { z as z130 } from "zod";
-var schematicRectProps = z130.object({
+import { z as z131 } from "zod";
+var schematicRectProps = z131.object({
   schX: distance35.optional(),
   schY: distance35.optional(),
   width: distance35,
   height: distance35,
   rotation: rotation10.default(0),
   strokeWidth: distance35.optional(),
-  color: z130.string().optional(),
-  isFilled: z130.boolean().optional().default(false),
-  fillColor: z130.string().optional(),
-  isDashed: z130.boolean().optional().default(false)
+  color: z131.string().optional(),
+  isFilled: z131.boolean().optional().default(false),
+  fillColor: z131.string().optional(),
+  isDashed: z131.boolean().optional().default(false)
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-line.ts
 import { distance as distance36 } from "circuit-json";
-import { z as z131 } from "zod";
-var schematicLineProps = z131.object({
+import { z as z132 } from "zod";
+var schematicLineProps = z132.object({
   x1: distance36,
   y1: distance36,
   x2: distance36,
   y2: distance36,
   strokeWidth: distance36.optional(),
-  color: z131.string().optional(),
-  isDashed: z131.boolean().optional().default(false),
+  color: z132.string().optional(),
+  isDashed: z132.boolean().optional().default(false),
   dashLength: distance36.optional(),
   dashGap: distance36.optional()
 });
@@ -19091,11 +19129,11 @@ expectTypesMatch(true);
 
 // lib/components/schematic-text.ts
 import { distance as distance37, rotation as rotation11 } from "circuit-json";
-import { z as z133 } from "zod";
+import { z as z134 } from "zod";
 
 // lib/common/fivePointAnchor.ts
-import { z as z132 } from "zod";
-var fivePointAnchor = z132.enum([
+import { z as z133 } from "zod";
+var fivePointAnchor = z133.enum([
   "center",
   "left",
   "right",
@@ -19104,39 +19142,39 @@ var fivePointAnchor = z132.enum([
 ]);
 
 // lib/components/schematic-text.ts
-var schematicTextProps = z133.object({
+var schematicTextProps = z134.object({
   schX: distance37.optional(),
   schY: distance37.optional(),
-  text: z133.string(),
-  fontSize: z133.number().default(1),
-  anchor: z133.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
-  color: z133.string().default("#000000"),
+  text: z134.string(),
+  fontSize: z134.number().default(1),
+  anchor: z134.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
+  color: z134.string().default("#000000"),
   schRotation: rotation11.default(0)
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-path.ts
 import { distance as distance38, point as point7 } from "circuit-json";
-import { z as z134 } from "zod";
-var schematicPathProps = z134.object({
-  points: z134.array(point7).optional(),
-  svgPath: z134.string().optional(),
+import { z as z135 } from "zod";
+var schematicPathProps = z135.object({
+  points: z135.array(point7).optional(),
+  svgPath: z135.string().optional(),
   strokeWidth: distance38.optional(),
-  strokeColor: z134.string().optional(),
+  strokeColor: z135.string().optional(),
   dashLength: distance38.optional(),
   dashGap: distance38.optional(),
-  isFilled: z134.boolean().optional().default(false),
-  fillColor: z134.string().optional()
+  isFilled: z135.boolean().optional().default(false),
+  fillColor: z135.string().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-table.ts
 import { distance as distance39 } from "circuit-json";
-import { z as z135 } from "zod";
-var schematicTableProps = z135.object({
+import { z as z136 } from "zod";
+var schematicTableProps = z136.object({
   schX: distance39.optional(),
   schY: distance39.optional(),
-  children: z135.any().optional(),
+  children: z136.any().optional(),
   cellPadding: distance39.optional(),
   borderWidth: distance39.optional(),
   anchor: ninePointAnchor.optional(),
@@ -19146,34 +19184,34 @@ expectTypesMatch(true);
 
 // lib/components/schematic-row.ts
 import { distance as distance40 } from "circuit-json";
-import { z as z136 } from "zod";
-var schematicRowProps = z136.object({
-  children: z136.any().optional(),
+import { z as z137 } from "zod";
+var schematicRowProps = z137.object({
+  children: z137.any().optional(),
   height: distance40.optional()
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-cell.ts
 import { distance as distance41 } from "circuit-json";
-import { z as z137 } from "zod";
-var schematicCellProps = z137.object({
-  children: z137.string().optional(),
-  horizontalAlign: z137.enum(["left", "center", "right"]).optional(),
-  verticalAlign: z137.enum(["top", "middle", "bottom"]).optional(),
+import { z as z138 } from "zod";
+var schematicCellProps = z138.object({
+  children: z138.string().optional(),
+  horizontalAlign: z138.enum(["left", "center", "right"]).optional(),
+  verticalAlign: z138.enum(["top", "middle", "bottom"]).optional(),
   fontSize: distance41.optional(),
-  rowSpan: z137.number().optional(),
-  colSpan: z137.number().optional(),
+  rowSpan: z138.number().optional(),
+  colSpan: z138.number().optional(),
   width: distance41.optional(),
-  text: z137.string().optional()
+  text: z138.string().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-section.ts
 import { distance as distance42 } from "circuit-json";
-import { z as z138 } from "zod";
-var schematicSectionProps = z138.object({
-  displayName: z138.string().optional(),
-  name: z138.string(),
+import { z as z139 } from "zod";
+var schematicSectionProps = z139.object({
+  displayName: z139.string().optional(),
+  name: z139.string(),
   sectionTitleFontSize: distance42.optional()
 });
 expectTypesMatch(
@@ -19181,38 +19219,38 @@ expectTypesMatch(
 );
 
 // lib/components/schematic-sheet.ts
-import { z as z139 } from "zod";
+import { z as z140 } from "zod";
 import { distance as distance43 } from "circuit-json";
-var schematicSheetProps = z139.object({
-  name: z139.string().optional(),
-  displayName: z139.string().optional(),
-  sheetIndex: z139.number().optional(),
-  sheetSize: z139.enum(["A4", "ANSI_B"]).default("A4"),
-  sheetWidth: distance43.pipe(z139.number().positive()).optional(),
-  sheetHeight: distance43.pipe(z139.number().positive()).optional(),
-  children: z139.any().optional()
+var schematicSheetProps = z140.object({
+  name: z140.string().optional(),
+  displayName: z140.string().optional(),
+  sheetIndex: z140.number().optional(),
+  sheetSize: z140.enum(["A4", "ANSI_B"]).default("A4"),
+  sheetWidth: distance43.pipe(z140.number().positive()).optional(),
+  sheetHeight: distance43.pipe(z140.number().positive()).optional(),
+  children: z140.any().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/schematic-graphic.ts
-import { z as z140 } from "zod";
+import { z as z141 } from "zod";
 var nonemptyUrl = url.refine((value) => value.trim().length > 0, {
   message: "imageUrl cannot be empty"
 });
-var positiveDistance4 = (fieldName) => distance.refine((value) => Number.isFinite(value) && value > 0, {
+var positiveDistance5 = (fieldName) => distance.refine((value) => Number.isFinite(value) && value > 0, {
   message: `${fieldName} must be a positive finite distance`
 });
-var schematicGraphicProps = z140.object({
+var schematicGraphicProps = z141.object({
   imageUrl: nonemptyUrl.optional(),
-  svgContent: z140.string().refine((value) => value.trim().length > 0, {
+  svgContent: z141.string().refine((value) => value.trim().length > 0, {
     message: "svgContent cannot be empty"
   }).optional(),
-  width: positiveDistance4("width").optional(),
-  height: positiveDistance4("height").optional()
+  width: positiveDistance5("width").optional(),
+  height: positiveDistance5("height").optional()
 }).superRefine(({ imageUrl, svgContent }, ctx) => {
   if (imageUrl === void 0 && svgContent === void 0) {
     ctx.addIssue({
-      code: z140.ZodIssueCode.custom,
+      code: z141.ZodIssueCode.custom,
       message: "At least one of imageUrl or svgContent is required"
     });
   }
@@ -19223,40 +19261,40 @@ expectTypesMatch(
 
 // lib/components/copper-text.ts
 import { layer_ref as layer_ref13, length as length8 } from "circuit-json";
-import { z as z141 } from "zod";
+import { z as z142 } from "zod";
 var copperTextProps = pcbLayoutProps.extend({
-  text: z141.string(),
+  text: z142.string(),
   anchorAlignment: ninePointAnchor.default("center"),
-  font: z141.enum(["tscircuit2024"]).optional(),
+  font: z142.enum(["tscircuit2024"]).optional(),
   fontSize: length8.optional(),
-  layers: z141.array(layer_ref13).optional(),
-  knockout: z141.boolean().optional(),
-  mirrored: z141.boolean().optional()
+  layers: z142.array(layer_ref13).optional(),
+  knockout: z142.boolean().optional(),
+  mirrored: z142.boolean().optional()
 });
 
 // lib/components/silkscreen-text.ts
 import { layer_ref as layer_ref14, length as length9 } from "circuit-json";
-import { z as z142 } from "zod";
+import { z as z143 } from "zod";
 var silkscreenTextProps = pcbLayoutProps.extend({
-  text: z142.string(),
+  text: z143.string(),
   anchorAlignment: ninePointAnchor.default("center"),
-  font: z142.enum(["tscircuit2024"]).optional(),
+  font: z143.enum(["tscircuit2024"]).optional(),
   fontSize: length9.optional(),
   /**
    * If true, text will knock out underlying silkscreen
    */
-  isKnockout: z142.boolean().optional(),
+  isKnockout: z143.boolean().optional(),
   knockoutPadding: length9.optional(),
   knockoutPaddingLeft: length9.optional(),
   knockoutPaddingRight: length9.optional(),
   knockoutPaddingTop: length9.optional(),
   knockoutPaddingBottom: length9.optional(),
-  layers: z142.array(layer_ref14).optional()
+  layers: z143.array(layer_ref14).optional()
 });
 
 // lib/components/silkscreen-path.ts
 import { length as length10, route_hint_point as route_hint_point5 } from "circuit-json";
-import { z as z143 } from "zod";
+import { z as z144 } from "zod";
 var silkscreenPathProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -19268,7 +19306,7 @@ var silkscreenPathProps = pcbLayoutProps.omit({
   pcbOffsetY: true,
   pcbRotation: true
 }).extend({
-  route: z143.array(route_hint_point5),
+  route: z144.array(route_hint_point5),
   strokeWidth: length10.optional()
 });
 
@@ -19290,10 +19328,10 @@ var silkscreenLineProps = pcbLayoutProps.omit({
 
 // lib/components/silkscreen-rect.ts
 import { distance as distance45 } from "circuit-json";
-import { z as z144 } from "zod";
+import { z as z145 } from "zod";
 var silkscreenRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  filled: z144.boolean().default(true).optional(),
-  stroke: z144.enum(["dashed", "solid", "none"]).optional(),
+  filled: z145.boolean().default(true).optional(),
+  stroke: z145.enum(["dashed", "solid", "none"]).optional(),
   strokeWidth: distance45.optional(),
   width: distance45,
   height: distance45,
@@ -19302,10 +19340,10 @@ var silkscreenRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
 
 // lib/components/silkscreen-circle.ts
 import { distance as distance46 } from "circuit-json";
-import { z as z145 } from "zod";
+import { z as z146 } from "zod";
 var silkscreenCircleProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  isFilled: z145.boolean().optional(),
-  isOutline: z145.boolean().optional(),
+  isFilled: z146.boolean().optional(),
+  isOutline: z146.boolean().optional(),
   strokeWidth: distance46.optional(),
   radius: distance46
 });
@@ -19323,69 +19361,69 @@ expectTypesMatch(true);
 
 // lib/components/trace-hint.ts
 import { distance as distance47, layer_ref as layer_ref15, route_hint_point as route_hint_point6 } from "circuit-json";
-import { z as z147 } from "zod";
-var routeHintPointProps = z147.object({
+import { z as z148 } from "zod";
+var routeHintPointProps = z148.object({
   x: distance47,
   y: distance47,
-  via: z147.boolean().optional(),
+  via: z148.boolean().optional(),
   toLayer: layer_ref15.optional()
 });
-var traceHintProps = z147.object({
-  for: z147.string().optional().describe(
+var traceHintProps = z148.object({
+  for: z148.string().optional().describe(
     "Selector for the port you're targeting, not required if you're inside a trace"
   ),
-  order: z147.number().optional(),
+  order: z148.number().optional(),
   offset: route_hint_point6.or(routeHintPointProps).optional(),
-  offsets: z147.array(route_hint_point6).or(z147.array(routeHintPointProps)).optional(),
-  traceWidth: z147.number().optional()
+  offsets: z148.array(route_hint_point6).or(z148.array(routeHintPointProps)).optional(),
+  traceWidth: z148.number().optional()
 });
 
 // lib/components/port.ts
 import { distance as distance48 } from "circuit-json";
-import { z as z148 } from "zod";
+import { z as z149 } from "zod";
 var portProps = commonLayoutProps.extend({
-  name: z148.string().optional(),
-  pinNumber: z148.number().optional(),
-  schStemLength: z148.number().optional(),
-  schPinLabelFontSize: z148.enum(["default", "sm"]).or(
+  name: z149.string().optional(),
+  pinNumber: z149.number().optional(),
+  schStemLength: z149.number().optional(),
+  schPinLabelFontSize: z149.enum(["default", "sm"]).or(
     distance48.refine((value) => Number.isFinite(value) && value > 0, {
       message: "Schematic pin-label font size must be positive and finite"
     })
   ).optional(),
-  aliases: z148.array(z148.string()).optional(),
-  layer: z148.string().optional(),
-  layers: z148.array(z148.string()).optional(),
-  schX: z148.number().optional(),
-  schY: z148.number().optional(),
+  aliases: z149.array(z149.string()).optional(),
+  layer: z149.string().optional(),
+  layers: z149.array(z149.string()).optional(),
+  schX: z149.number().optional(),
+  schY: z149.number().optional(),
   direction: direction.optional(),
-  connectsTo: z148.string().or(z148.array(z148.string())).optional(),
+  connectsTo: z149.string().or(z149.array(z149.string())).optional(),
   kicadPinMetadata: kicadPinMetadata.optional(),
-  hasInversionCircle: z148.boolean().optional()
+  hasInversionCircle: z149.boolean().optional()
 });
 
 // lib/components/pcb-note-text.ts
 import { length as length11 } from "circuit-json";
-import { z as z149 } from "zod";
+import { z as z150 } from "zod";
 var pcbNoteTextProps = pcbLayoutProps.extend({
-  text: z149.string(),
-  anchorAlignment: z149.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  font: z149.enum(["tscircuit2024"]).optional(),
+  text: z150.string(),
+  anchorAlignment: z150.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  font: z150.enum(["tscircuit2024"]).optional(),
   fontSize: length11.optional(),
-  color: z149.string().optional()
+  color: z150.string().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/pcb-note-rect.ts
 import { distance as distance49 } from "circuit-json";
-import { z as z150 } from "zod";
+import { z as z151 } from "zod";
 var pcbNoteRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
   width: distance49,
   height: distance49,
   strokeWidth: distance49.optional(),
-  isFilled: z150.boolean().optional(),
-  hasStroke: z150.boolean().optional(),
-  isStrokeDashed: z150.boolean().optional(),
-  color: z150.string().optional(),
+  isFilled: z151.boolean().optional(),
+  hasStroke: z151.boolean().optional(),
+  isStrokeDashed: z151.boolean().optional(),
+  color: z151.string().optional(),
   cornerRadius: distance49.optional()
 });
 expectTypesMatch(true);
@@ -19395,7 +19433,7 @@ import {
   length as length12,
   route_hint_point as route_hint_point7
 } from "circuit-json";
-import { z as z151 } from "zod";
+import { z as z152 } from "zod";
 var pcbNotePathProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -19407,15 +19445,15 @@ var pcbNotePathProps = pcbLayoutProps.omit({
   pcbOffsetY: true,
   pcbRotation: true
 }).extend({
-  route: z151.array(route_hint_point7),
+  route: z152.array(route_hint_point7),
   strokeWidth: length12.optional(),
-  color: z151.string().optional()
+  color: z152.string().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/pcb-note-line.ts
 import { distance as distance50 } from "circuit-json";
-import { z as z152 } from "zod";
+import { z as z153 } from "zod";
 var pcbNoteLineProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -19432,15 +19470,15 @@ var pcbNoteLineProps = pcbLayoutProps.omit({
   x2: distance50,
   y2: distance50,
   strokeWidth: distance50.optional(),
-  color: z152.string().optional(),
-  isDashed: z152.boolean().optional()
+  color: z153.string().optional(),
+  isDashed: z153.boolean().optional()
 });
 expectTypesMatch(true);
 
 // lib/components/pcb-note-dimension.ts
 import { distance as distance51, length as length13 } from "circuit-json";
-import { z as z153 } from "zod";
-var dimensionTarget2 = z153.union([z153.string(), point]);
+import { z as z154 } from "zod";
+var dimensionTarget2 = z154.union([z154.string(), point]);
 var pcbNoteDimensionProps = pcbLayoutProps.omit({
   pcbLeftEdgeX: true,
   pcbRightEdgeX: true,
@@ -19454,114 +19492,114 @@ var pcbNoteDimensionProps = pcbLayoutProps.omit({
 }).extend({
   from: dimensionTarget2,
   to: dimensionTarget2,
-  text: z153.string().optional(),
+  text: z154.string().optional(),
   offset: distance51.optional(),
-  offsetDirection: z153.object({ x: z153.number().finite(), y: z153.number().finite() }).optional(),
-  font: z153.enum(["tscircuit2024"]).optional(),
+  offsetDirection: z154.object({ x: z154.number().finite(), y: z154.number().finite() }).optional(),
+  font: z154.enum(["tscircuit2024"]).optional(),
   fontSize: length13.optional(),
-  color: z153.string().optional(),
+  color: z154.string().optional(),
   arrowSize: distance51.optional(),
-  units: z153.enum(["in", "mm"]).optional(),
-  outerEdgeToEdge: z153.literal(true).optional(),
-  centerToCenter: z153.literal(true).optional(),
-  innerEdgeToEdge: z153.literal(true).optional()
+  units: z154.enum(["in", "mm"]).optional(),
+  outerEdgeToEdge: z154.literal(true).optional(),
+  centerToCenter: z154.literal(true).optional(),
+  innerEdgeToEdge: z154.literal(true).optional()
 });
 expectTypesMatch(
   true
 );
 
 // lib/platformConfig.ts
-import { z as z154 } from "zod";
-var unvalidatedCircuitJson = z154.array(z154.any()).describe("Circuit JSON");
-var footprintLibraryResult = z154.object({
-  footprintCircuitJson: z154.array(z154.any()),
+import { z as z155 } from "zod";
+var unvalidatedCircuitJson = z155.array(z155.any()).describe("Circuit JSON");
+var footprintLibraryResult = z155.object({
+  footprintCircuitJson: z155.array(z155.any()),
   cadModel: cadModelProp.optional()
 });
-var pathToCircuitJsonFn = z154.function().args(z154.string()).returns(z154.promise(footprintLibraryResult)).or(
-  z154.function().args(
-    z154.string(),
-    z154.object({ resolvedPcbStyle: pcbStyle.optional() }).optional()
-  ).returns(z154.promise(footprintLibraryResult))
+var pathToCircuitJsonFn = z155.function().args(z155.string()).returns(z155.promise(footprintLibraryResult)).or(
+  z155.function().args(
+    z155.string(),
+    z155.object({ resolvedPcbStyle: pcbStyle.optional() }).optional()
+  ).returns(z155.promise(footprintLibraryResult))
 ).describe("A function that takes a path and returns Circuit JSON");
-var footprintFileParserEntry = z154.object({
-  loadFromUrl: z154.function().args(z154.string()).returns(z154.promise(footprintLibraryResult)).describe(
+var footprintFileParserEntry = z155.object({
+  loadFromUrl: z155.function().args(z155.string()).returns(z155.promise(footprintLibraryResult)).describe(
     "A function that takes a footprint file URL and returns Circuit JSON"
   )
 });
-var spiceEngineSimulationResult = z154.object({
-  engineVersionString: z154.string().optional(),
+var spiceEngineSimulationResult = z155.object({
+  engineVersionString: z155.string().optional(),
   simulationResultCircuitJson: unvalidatedCircuitJson
 });
-var spiceEngineZod = z154.object({
-  simulate: z154.function().args(z154.string()).returns(z154.promise(spiceEngineSimulationResult)).describe(
+var spiceEngineZod = z155.object({
+  simulate: z155.function().args(z155.string()).returns(z155.promise(spiceEngineSimulationResult)).describe(
     "A function that takes a SPICE string and returns a simulation result"
   )
 });
-var defaultSpiceEngine = z154.custom(
+var defaultSpiceEngine = z155.custom(
   (value) => typeof value === "string"
 );
-var autorouterInstance = z154.object({
-  run: z154.function().args().returns(z154.promise(z154.unknown())).describe("Run the autorouter"),
-  getOutputSimpleRouteJson: z154.function().args().returns(z154.promise(z154.any())).describe("Get the resulting SimpleRouteJson")
+var autorouterInstance = z155.object({
+  run: z155.function().args().returns(z155.promise(z155.unknown())).describe("Run the autorouter"),
+  getOutputSimpleRouteJson: z155.function().args().returns(z155.promise(z155.any())).describe("Get the resulting SimpleRouteJson")
 });
-var autorouterDefinition = z154.object({
-  createAutorouter: z154.function().args(z154.any(), z154.any().optional()).returns(z154.union([autorouterInstance, z154.promise(autorouterInstance)])).describe("Create an autorouter instance")
+var autorouterDefinition = z155.object({
+  createAutorouter: z155.function().args(z155.any(), z155.any().optional()).returns(z155.union([autorouterInstance, z155.promise(autorouterInstance)])).describe("Create an autorouter instance")
 });
-var platformFetch = z154.custom((value) => typeof value === "function").describe("A fetch-like function to use for platform requests");
-var localCacheEngine = z154.custom(
+var platformFetch = z155.custom((value) => typeof value === "function").describe("A fetch-like function to use for platform requests");
+var localCacheEngine = z155.custom(
   (value) => typeof value === "object" && value !== null && "getItem" in value && typeof value.getItem === "function" && "setItem" in value && typeof value.setItem === "function"
 );
-var fabricatorEngine = z154.custom(
+var fabricatorEngine = z155.custom(
   (value) => typeof value === "object" && value !== null && "runDrcChecks" in value && typeof value.runDrcChecks === "function"
 );
-var platformConfig = z154.object({
+var platformConfig = z155.object({
   partsEngine: partsEngine.optional(),
   fabricatorEngine: fabricatorEngine.optional(),
   autorouter: autorouterProp.optional(),
-  autorouterMap: z154.record(z154.string(), autorouterDefinition).optional(),
-  allowLegacyAutorouters: z154.boolean().optional(),
+  autorouterMap: z155.record(z155.string(), autorouterDefinition).optional(),
+  allowLegacyAutorouters: z155.boolean().optional(),
   registryApiUrl: url.optional(),
   cloudAutorouterUrl: url.optional(),
-  projectName: z154.string().optional(),
+  projectName: z155.string().optional(),
   projectBaseUrl: url.optional(),
-  version: z154.string().optional(),
+  version: z155.string().optional(),
   url: url.optional(),
-  printBoardInformationToSilkscreen: z154.boolean().optional(),
-  includeBoardFiles: z154.array(z154.string()).describe(
+  printBoardInformationToSilkscreen: z155.boolean().optional(),
+  includeBoardFiles: z155.array(z155.string()).describe(
     'The board files to automatically build with "tsci build", defaults to ["**/*.circuit.tsx"]. Can be an array of files or globs'
   ).optional(),
-  snapshotsDir: z154.string().describe(
+  snapshotsDir: z155.string().describe(
     'The directory where snapshots are stored for "tsci snapshot", defaults to "tests/__snapshots__"'
   ).optional(),
   defaultSpiceEngine: defaultSpiceEngine.optional(),
-  unitPreference: z154.enum(["mm", "in", "mil"]).optional(),
+  unitPreference: z155.enum(["mm", "in", "mil"]).optional(),
   localCacheEngine: localCacheEngine.optional(),
-  useCloudAutorouter: z154.boolean().optional(),
-  enablePartOrientationAnalysis: z154.boolean().optional(),
-  pcbPackSolverTimeoutMs: z154.number().finite().positive().optional(),
-  pcbDisabled: z154.boolean().optional(),
-  routingDisabled: z154.boolean().optional(),
-  schematicDisabled: z154.boolean().optional(),
-  partsEngineDisabled: z154.boolean().optional(),
-  analogSimulationDisabled: z154.boolean().optional(),
-  drcChecksDisabled: z154.boolean().optional(),
-  netlistDrcChecksDisabled: z154.boolean().optional(),
-  routingDrcChecksDisabled: z154.boolean().optional(),
-  placementDrcChecksDisabled: z154.boolean().optional(),
-  pinSpecificationDrcChecksDisabled: z154.boolean().optional(),
-  spiceEngineMap: z154.record(z154.string(), spiceEngineZod).optional(),
-  footprintLibraryMap: z154.record(
-    z154.string(),
-    z154.union([
+  useCloudAutorouter: z155.boolean().optional(),
+  enablePartOrientationAnalysis: z155.boolean().optional(),
+  pcbPackSolverTimeoutMs: z155.number().finite().positive().optional(),
+  pcbDisabled: z155.boolean().optional(),
+  routingDisabled: z155.boolean().optional(),
+  schematicDisabled: z155.boolean().optional(),
+  partsEngineDisabled: z155.boolean().optional(),
+  analogSimulationDisabled: z155.boolean().optional(),
+  drcChecksDisabled: z155.boolean().optional(),
+  netlistDrcChecksDisabled: z155.boolean().optional(),
+  routingDrcChecksDisabled: z155.boolean().optional(),
+  placementDrcChecksDisabled: z155.boolean().optional(),
+  pinSpecificationDrcChecksDisabled: z155.boolean().optional(),
+  spiceEngineMap: z155.record(z155.string(), spiceEngineZod).optional(),
+  footprintLibraryMap: z155.record(
+    z155.string(),
+    z155.union([
       pathToCircuitJsonFn,
-      z154.record(
-        z154.string(),
-        z154.union([unvalidatedCircuitJson, pathToCircuitJsonFn])
+      z155.record(
+        z155.string(),
+        z155.union([unvalidatedCircuitJson, pathToCircuitJsonFn])
       )
     ])
   ).optional(),
-  footprintFileParserMap: z154.record(z154.string(), footprintFileParserEntry).optional(),
-  resolveProjectStaticFileImportUrl: z154.function().args(z154.string()).returns(z154.promise(z154.string())).describe(
+  footprintFileParserMap: z155.record(z155.string(), footprintFileParserEntry).optional(),
+  resolveProjectStaticFileImportUrl: z155.function().args(z155.string()).returns(z155.promise(z155.string())).describe(
     "A function that returns a string URL for static files for the project"
   ).optional(),
   platformFetch: platformFetch.optional()
@@ -19769,6 +19807,7 @@ export {
   pcbPathPoint,
   pcbSameXConstraintProps,
   pcbSameYConstraintProps,
+  pcbSoldermaskOpeningProps,
   pcbStiffenerProps,
   pcbStyle,
   pcbSx,