@tscircuit/props 0.0.673 → 0.0.675

package/README.md

@@ -942,7 +942,14 @@ export interface FabricationNoteDimensionProps extends Omit<
   from: string | Point;
   to: string | Point;
   text?: string;
+  /** Offset distance in mm, or a unit-bearing string. Defaults to no offset. */
   offset?: string | number;
+  /**
+   * Unitless direction in footprint-local coordinates (+X right, +Y up).
+   * Preserved as supplied; omitted uses the perpendicular to from -> to.
+   * The direction rotates/mirrors with the footprint, without translation.
+   */
+  offsetDirection?: { x: number; y: number };
   font?: "tscircuit2024";
   fontSize?: string | number;
   color?: string;
@@ -1532,7 +1539,14 @@ export interface PcbNoteDimensionProps extends Omit<
   from: string | Point;
   to: string | Point;
   text?: string;
+  /** Offset distance in mm, or a unit-bearing string. Defaults to no offset. */
   offset?: string | number;
+  /**
+   * Unitless direction in footprint-local coordinates (+X right, +Y up).
+   * Preserved as supplied; omitted uses the perpendicular to from -> to.
+   * The direction rotates/mirrors with the footprint, without translation.
+   */
+  offsetDirection?: { x: number; y: number };
   font?: "tscircuit2024";
   fontSize?: string | number;
   color?: string;

package/dist/index.d.ts

@@ -33638,11 +33638,20 @@ interface AutorouterConfig {
     algorithmFn?: (simpleRouteJson: any) => Promise<any>;
     /** Override the solver used to place implicit breakout points. */
     implicitBreakoutPointSolverFn?: ImplicitBreakoutPointSolverFn;
-    preset?: /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential_trace" | "subcircuit" | "default" | "auto" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "dogbone" | "bus_lanes" | /** @deprecated Use "auto_jumper" */ "auto-jumper" | /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential-trace" | /** @deprecated Use "auto_local" */ "auto-local" | /** @deprecated Use "auto_cloud" */ "auto-cloud";
+    /**
+     * single_layer_bus and single_layer_buses are aliases that parse as bus_lanes.
+     * Omitted leaves the preset unset. Existing presets remain unchanged; no
+     * conflicting fields or migration are introduced.
+     */
+    preset?: /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential_trace" | "subcircuit" | "default" | "auto" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "dogbone" | "bus_lanes" | "single_layer_bus" | "single_layer_buses" | /** @deprecated Use "auto_jumper" */ "auto-jumper" | /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential-trace" | /** @deprecated Use "auto_local" */ "auto-local" | /** @deprecated Use "auto_cloud" */ "auto-cloud";
 }
 type AutorouterPreset = /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential_trace" | "subcircuit" | "default" | "auto" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout"
 /** Local pad-to-via fanout without routing to a breakout boundary. */
- | "dogbone" | "bus_lanes" | "auto-jumper" | /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential-trace" | "auto-local" | "auto-cloud";
+ | "dogbone" | "bus_lanes"
+/** Alias for bus_lanes; parsing normalizes to bus_lanes. */
+ | "single_layer_bus"
+/** Alias for bus_lanes; parsing normalizes to bus_lanes. */
+ | "single_layer_buses" | "auto-jumper" | /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential-trace" | "auto-local" | "auto-cloud";
 type AutorouterProp = AutorouterConfig | AutocompleteString<AutorouterPreset>;
 declare const routingTolerances: z.ZodObject<{
     minTraceWidth: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -33690,7 +33699,7 @@ declare const autorouterConfig: z.ZodObject<{
     groupMode: z.ZodOptional<z.ZodEnum<["sequential_trace", "subcircuit", "sequential-trace"]>>;
     algorithmFn: z.ZodOptional<z.ZodType<(simpleRouteJson: any) => Promise<any>, z.ZodTypeDef, (simpleRouteJson: any) => Promise<any>>>;
     implicitBreakoutPointSolverFn: z.ZodOptional<z.ZodType<ImplicitBreakoutPointSolverFn, z.ZodTypeDef, ImplicitBreakoutPointSolverFn>>;
-    preset: z.ZodOptional<z.ZodEnum<["sequential_trace", "subcircuit", "default", "auto", "auto_local", "auto_cloud", "auto_jumper", "tscircuit_beta", "krt", "freerouting", "simplify", "laser_prefab", "single_layer_fanout", "fanout", "dogbone", "bus_lanes", "auto-jumper", "sequential-trace", "auto-local", "auto-cloud"]>>;
+    preset: z.ZodOptional<z.ZodEffects<z.ZodEnum<["sequential_trace", "subcircuit", "default", "auto", "auto_local", "auto_cloud", "auto_jumper", "tscircuit_beta", "krt", "freerouting", "simplify", "laser_prefab", "single_layer_fanout", "fanout", "dogbone", "bus_lanes", "single_layer_bus", "single_layer_buses", "auto-jumper", "sequential-trace", "auto-local", "auto-cloud"]>, "default" | "auto" | "sequential_trace" | "subcircuit" | "sequential-trace" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "dogbone" | "bus_lanes" | "auto-jumper" | "auto-local" | "auto-cloud", "default" | "auto" | "sequential_trace" | "subcircuit" | "sequential-trace" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "dogbone" | "bus_lanes" | "single_layer_bus" | "single_layer_buses" | "auto-jumper" | "auto-local" | "auto-cloud">>;
     local: z.ZodOptional<z.ZodBoolean>;
 }, "strip", z.ZodTypeAny, {
     serverUrl?: string | undefined;
@@ -33718,10 +33727,10 @@ declare const autorouterConfig: z.ZodObject<{
     groupMode?: "sequential_trace" | "subcircuit" | "sequential-trace" | undefined;
     algorithmFn?: ((simpleRouteJson: any) => Promise<any>) | undefined;
     implicitBreakoutPointSolverFn?: ImplicitBreakoutPointSolverFn | undefined;
-    preset?: "default" | "auto" | "sequential_trace" | "subcircuit" | "sequential-trace" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "dogbone" | "bus_lanes" | "auto-jumper" | "auto-local" | "auto-cloud" | undefined;
+    preset?: "default" | "auto" | "sequential_trace" | "subcircuit" | "sequential-trace" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "dogbone" | "bus_lanes" | "single_layer_bus" | "single_layer_buses" | "auto-jumper" | "auto-local" | "auto-cloud" | undefined;
     local?: boolean | undefined;
 }>;
-declare const autorouterPreset: z.ZodUnion<[z.ZodLiteral<"sequential_trace">, z.ZodLiteral<"subcircuit">, z.ZodLiteral<"default">, z.ZodLiteral<"auto">, z.ZodLiteral<"auto_local">, z.ZodLiteral<"auto_cloud">, z.ZodLiteral<"auto_jumper">, z.ZodLiteral<"tscircuit_beta">, z.ZodLiteral<"krt">, z.ZodLiteral<"freerouting">, z.ZodLiteral<"simplify">, z.ZodLiteral<"laser_prefab">, z.ZodLiteral<"single_layer_fanout">, z.ZodLiteral<"fanout">, z.ZodLiteral<"dogbone">, z.ZodLiteral<"bus_lanes">, z.ZodLiteral<"auto-jumper">, z.ZodLiteral<"sequential-trace">, z.ZodLiteral<"auto-local">, z.ZodLiteral<"auto-cloud">]>;
+declare const autorouterPreset: z.ZodUnion<[z.ZodLiteral<"sequential_trace">, z.ZodLiteral<"subcircuit">, z.ZodLiteral<"default">, z.ZodLiteral<"auto">, z.ZodLiteral<"auto_local">, z.ZodLiteral<"auto_cloud">, z.ZodLiteral<"auto_jumper">, z.ZodLiteral<"tscircuit_beta">, z.ZodLiteral<"krt">, z.ZodLiteral<"freerouting">, z.ZodLiteral<"simplify">, z.ZodLiteral<"laser_prefab">, z.ZodLiteral<"single_layer_fanout">, z.ZodLiteral<"fanout">, z.ZodLiteral<"dogbone">, z.ZodLiteral<"bus_lanes">, z.ZodEffects<z.ZodLiteral<"single_layer_bus">, "bus_lanes", "single_layer_bus">, z.ZodEffects<z.ZodLiteral<"single_layer_buses">, "bus_lanes", "single_layer_buses">, z.ZodLiteral<"auto-jumper">, z.ZodLiteral<"sequential-trace">, z.ZodLiteral<"auto-local">, z.ZodLiteral<"auto-cloud">]>;
 declare const autorouterProp: z.ZodType<AutorouterProp>;
 declare const autorouterEffortLevel: z.ZodEnum<["1x", "1.5x", "2x", "5x", "10x", "100x"]>;
 declare const preflightRoutingCheckPolicy: z.ZodEnum<["none", "basic", "conservative"]>;
@@ -202807,7 +202816,17 @@ interface FabricationNoteDimensionProps extends Omit<PcbLayoutProps, "pcbLeftEdg
     from: string | Point;
     to: string | Point;
     text?: string;
+    /** Offset distance in mm, or a unit-bearing string. Defaults to no offset. */
     offset?: string | number;
+    /**
+     * Unitless direction in footprint-local coordinates (+X right, +Y up).
+     * Preserved as supplied; omitted uses the perpendicular to from -> to.
+     * The direction rotates/mirrors with the footprint, without translation.
+     */
+    offsetDirection?: {
+        x: number;
+        y: number;
+    };
     font?: "tscircuit2024";
     fontSize?: string | number;
     color?: string;
@@ -202905,6 +202924,16 @@ declare const fabricationNoteDimensionProps: z.ZodObject<Omit<{
     }>]>;
     text: z.ZodOptional<z.ZodString>;
     offset: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    offsetDirection: z.ZodOptional<z.ZodObject<{
+        x: z.ZodNumber;
+        y: z.ZodNumber;
+    }, "strip", z.ZodTypeAny, {
+        x: number;
+        y: number;
+    }, {
+        x: number;
+        y: number;
+    }>>;
     font: z.ZodOptional<z.ZodEnum<["tscircuit2024"]>>;
     fontSize: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     color: z.ZodOptional<z.ZodString>;
@@ -202951,6 +202980,10 @@ declare const fabricationNoteDimensionProps: z.ZodObject<Omit<{
     centerToCenter?: true | undefined;
     color?: string | undefined;
     text?: string | undefined;
+    offsetDirection?: {
+        x: number;
+        y: number;
+    } | undefined;
     arrowSize?: number | undefined;
     units?: "in" | "mm" | undefined;
     outerEdgeToEdge?: true | undefined;
@@ -202995,6 +203028,10 @@ declare const fabricationNoteDimensionProps: z.ZodObject<Omit<{
     centerToCenter?: true | undefined;
     color?: string | undefined;
     text?: string | undefined;
+    offsetDirection?: {
+        x: number;
+        y: number;
+    } | undefined;
     arrowSize?: string | number | undefined;
     units?: "in" | "mm" | undefined;
     outerEdgeToEdge?: true | undefined;
@@ -241208,7 +241245,17 @@ interface PcbNoteDimensionProps extends Omit<PcbLayoutProps, "pcbLeftEdgeX" | "p
     from: string | Point;
     to: string | Point;
     text?: string;
+    /** Offset distance in mm, or a unit-bearing string. Defaults to no offset. */
     offset?: string | number;
+    /**
+     * Unitless direction in footprint-local coordinates (+X right, +Y up).
+     * Preserved as supplied; omitted uses the perpendicular to from -> to.
+     * The direction rotates/mirrors with the footprint, without translation.
+     */
+    offsetDirection?: {
+        x: number;
+        y: number;
+    };
     font?: "tscircuit2024";
     fontSize?: string | number;
     color?: string;
@@ -241306,6 +241353,16 @@ declare const pcbNoteDimensionProps: z.ZodObject<Omit<{
     }>]>;
     text: z.ZodOptional<z.ZodString>;
     offset: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    offsetDirection: z.ZodOptional<z.ZodObject<{
+        x: z.ZodNumber;
+        y: z.ZodNumber;
+    }, "strip", z.ZodTypeAny, {
+        x: number;
+        y: number;
+    }, {
+        x: number;
+        y: number;
+    }>>;
     font: z.ZodOptional<z.ZodEnum<["tscircuit2024"]>>;
     fontSize: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     color: z.ZodOptional<z.ZodString>;
@@ -241352,6 +241409,10 @@ declare const pcbNoteDimensionProps: z.ZodObject<Omit<{
     centerToCenter?: true | undefined;
     color?: string | undefined;
     text?: string | undefined;
+    offsetDirection?: {
+        x: number;
+        y: number;
+    } | undefined;
     arrowSize?: number | undefined;
     units?: "in" | "mm" | undefined;
     outerEdgeToEdge?: true | undefined;
@@ -241396,6 +241457,10 @@ declare const pcbNoteDimensionProps: z.ZodObject<Omit<{
     centerToCenter?: true | undefined;
     color?: string | undefined;
     text?: string | undefined;
+    offsetDirection?: {
+        x: number;
+        y: number;
+    } | undefined;
     arrowSize?: string | number | undefined;
     units?: "in" | "mm" | undefined;
     outerEdgeToEdge?: true | undefined;

package/dist/index.js

@@ -16533,11 +16533,15 @@ var autorouterConfig = z44.object({
     "fanout",
     "dogbone",
     "bus_lanes",
+    "single_layer_bus",
+    "single_layer_buses",
     "auto-jumper",
     "sequential-trace",
     "auto-local",
     "auto-cloud"
-  ]).optional(),
+  ]).transform(
+    (preset) => preset === "single_layer_bus" || preset === "single_layer_buses" ? "bus_lanes" : preset
+  ).optional(),
   local: z44.boolean().optional()
 });
 var autorouterPreset = z44.union([
@@ -16558,6 +16562,8 @@ var autorouterPreset = z44.union([
   z44.literal("fanout"),
   z44.literal("dogbone"),
   z44.literal("bus_lanes"),
+  z44.literal("single_layer_bus").transform(() => "bus_lanes"),
+  z44.literal("single_layer_buses").transform(() => "bus_lanes"),
   z44.literal("auto-jumper"),
   z44.literal("sequential-trace"),
   z44.literal("auto-local"),
@@ -18631,6 +18637,7 @@ var fabricationNoteDimensionProps = pcbLayoutProps.omit({
   to: dimensionTarget,
   text: z108.string().optional(),
   offset: distance24.optional(),
+  offsetDirection: z108.object({ x: z108.number().finite(), y: z108.number().finite() }).optional(),
   font: z108.enum(["tscircuit2024"]).optional(),
   fontSize: length6.optional(),
   color: z108.string().optional(),
@@ -19449,6 +19456,7 @@ var pcbNoteDimensionProps = pcbLayoutProps.omit({
   to: dimensionTarget2,
   text: z153.string().optional(),
   offset: distance51.optional(),
+  offsetDirection: z153.object({ x: z153.number().finite(), y: z153.number().finite() }).optional(),
   font: z153.enum(["tscircuit2024"]).optional(),
   fontSize: length13.optional(),
   color: z153.string().optional(),