@tscircuit/props 0.0.658 → 0.0.660

package/README.md

@@ -424,6 +424,11 @@ export interface BoardProps extends Omit<
    * false, which restricts newly generated vias to the full board stack.
    */
   allowBlindAndBuriedVias?: boolean;
+  /**
+   * Whether to route remaining unrouted connections after explicit routing phases.
+   * Omitted leaves the setting unset, preserving the consumer's default behavior.
+   */
+  routeRemaining?: boolean;
   defaultViaTenting?:
     | boolean
     | "both_sides"

package/dist/index.d.ts

@@ -21290,9 +21290,9 @@ interface AutorouterConfig {
     algorithmFn?: (simpleRouteJson: any) => Promise<any>;
     /** Override the solver used to place implicit breakout points. */
     implicitBreakoutPointSolverFn?: ImplicitBreakoutPointSolverFn;
-    preset?: /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential_trace" | "subcircuit" | "default" | "auto" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | /** @deprecated Use "auto_jumper" */ "auto-jumper" | /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential-trace" | /** @deprecated Use "auto_local" */ "auto-local" | /** @deprecated Use "auto_cloud" */ "auto-cloud";
+    preset?: /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential_trace" | "subcircuit" | "default" | "auto" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "bus_lanes" | /** @deprecated Use "auto_jumper" */ "auto-jumper" | /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential-trace" | /** @deprecated Use "auto_local" */ "auto-local" | /** @deprecated Use "auto_cloud" */ "auto-cloud";
 }
-type AutorouterPreset = /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential_trace" | "subcircuit" | "default" | "auto" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "auto-jumper" | /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential-trace" | "auto-local" | "auto-cloud";
+type AutorouterPreset = /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential_trace" | "subcircuit" | "default" | "auto" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "bus_lanes" | "auto-jumper" | /** @deprecated Disabled by default in core. Use the default autorouter with <autoroutingphase /> or <fanout /> as needed. Legacy support requires platformConfig.allowLegacyAutorouters: true. */ "sequential-trace" | "auto-local" | "auto-cloud";
 type AutorouterProp = AutorouterConfig | AutocompleteString<AutorouterPreset>;
 declare const routingTolerances: z.ZodObject<{
     minTraceWidth: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -21337,7 +21337,7 @@ declare const autorouterConfig: z.ZodObject<{
     groupMode: z.ZodOptional<z.ZodEnum<["sequential_trace", "subcircuit", "sequential-trace"]>>;
     algorithmFn: z.ZodOptional<z.ZodType<(simpleRouteJson: any) => Promise<any>, z.ZodTypeDef, (simpleRouteJson: any) => Promise<any>>>;
     implicitBreakoutPointSolverFn: z.ZodOptional<z.ZodType<ImplicitBreakoutPointSolverFn, z.ZodTypeDef, ImplicitBreakoutPointSolverFn>>;
-    preset: z.ZodOptional<z.ZodEnum<["sequential_trace", "subcircuit", "default", "auto", "auto_local", "auto_cloud", "auto_jumper", "tscircuit_beta", "krt", "freerouting", "simplify", "laser_prefab", "single_layer_fanout", "fanout", "auto-jumper", "sequential-trace", "auto-local", "auto-cloud"]>>;
+    preset: z.ZodOptional<z.ZodEnum<["sequential_trace", "subcircuit", "default", "auto", "auto_local", "auto_cloud", "auto_jumper", "tscircuit_beta", "krt", "freerouting", "simplify", "laser_prefab", "single_layer_fanout", "fanout", "bus_lanes", "auto-jumper", "sequential-trace", "auto-local", "auto-cloud"]>>;
     local: z.ZodOptional<z.ZodBoolean>;
 }, "strip", z.ZodTypeAny, {
     serverUrl?: string | undefined;
@@ -21351,7 +21351,7 @@ declare const autorouterConfig: z.ZodObject<{
     groupMode?: "sequential_trace" | "subcircuit" | "sequential-trace" | undefined;
     algorithmFn?: ((simpleRouteJson: any) => Promise<any>) | undefined;
     implicitBreakoutPointSolverFn?: ImplicitBreakoutPointSolverFn | undefined;
-    preset?: "default" | "auto" | "sequential_trace" | "subcircuit" | "sequential-trace" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "auto-jumper" | "auto-local" | "auto-cloud" | undefined;
+    preset?: "default" | "auto" | "sequential_trace" | "subcircuit" | "sequential-trace" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "bus_lanes" | "auto-jumper" | "auto-local" | "auto-cloud" | undefined;
     local?: boolean | undefined;
 }, {
     serverUrl?: string | undefined;
@@ -21365,10 +21365,10 @@ declare const autorouterConfig: z.ZodObject<{
     groupMode?: "sequential_trace" | "subcircuit" | "sequential-trace" | undefined;
     algorithmFn?: ((simpleRouteJson: any) => Promise<any>) | undefined;
     implicitBreakoutPointSolverFn?: ImplicitBreakoutPointSolverFn | undefined;
-    preset?: "default" | "auto" | "sequential_trace" | "subcircuit" | "sequential-trace" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "auto-jumper" | "auto-local" | "auto-cloud" | undefined;
+    preset?: "default" | "auto" | "sequential_trace" | "subcircuit" | "sequential-trace" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "simplify" | "laser_prefab" | "single_layer_fanout" | "fanout" | "bus_lanes" | "auto-jumper" | "auto-local" | "auto-cloud" | undefined;
     local?: boolean | undefined;
 }>;
-declare const autorouterPreset: z.ZodUnion<[z.ZodLiteral<"sequential_trace">, z.ZodLiteral<"subcircuit">, z.ZodLiteral<"default">, z.ZodLiteral<"auto">, z.ZodLiteral<"auto_local">, z.ZodLiteral<"auto_cloud">, z.ZodLiteral<"auto_jumper">, z.ZodLiteral<"tscircuit_beta">, z.ZodLiteral<"krt">, z.ZodLiteral<"freerouting">, z.ZodLiteral<"simplify">, z.ZodLiteral<"laser_prefab">, z.ZodLiteral<"single_layer_fanout">, z.ZodLiteral<"fanout">, z.ZodLiteral<"auto-jumper">, z.ZodLiteral<"sequential-trace">, z.ZodLiteral<"auto-local">, z.ZodLiteral<"auto-cloud">]>;
+declare const autorouterPreset: z.ZodUnion<[z.ZodLiteral<"sequential_trace">, z.ZodLiteral<"subcircuit">, z.ZodLiteral<"default">, z.ZodLiteral<"auto">, z.ZodLiteral<"auto_local">, z.ZodLiteral<"auto_cloud">, z.ZodLiteral<"auto_jumper">, z.ZodLiteral<"tscircuit_beta">, z.ZodLiteral<"krt">, z.ZodLiteral<"freerouting">, z.ZodLiteral<"simplify">, z.ZodLiteral<"laser_prefab">, z.ZodLiteral<"single_layer_fanout">, z.ZodLiteral<"fanout">, z.ZodLiteral<"bus_lanes">, z.ZodLiteral<"auto-jumper">, z.ZodLiteral<"sequential-trace">, z.ZodLiteral<"auto-local">, z.ZodLiteral<"auto-cloud">]>;
 declare const autorouterProp: z.ZodType<AutorouterProp>;
 declare const autorouterEffortLevel: z.ZodEnum<["1x", "2x", "5x", "10x", "100x"]>;
 declare const preflightRoutingCheckPolicy: z.ZodEnum<["none", "basic", "conservative"]>;
@@ -27910,6 +27910,11 @@ interface BoardProps extends Omit<SubcircuitGroupProps, "subcircuit" | "connecti
      * false, which restricts newly generated vias to the full board stack.
      */
     allowBlindAndBuriedVias?: boolean;
+    /**
+     * Whether to route remaining unrouted connections after explicit routing phases.
+     * Omitted leaves the setting unset, preserving the consumer's default behavior.
+     */
+    routeRemaining?: boolean;
     defaultViaTenting?: boolean | "both_sides" | "top_and_bottom_tented" | "top_tented" | "bottom_tented" | "exposed";
     borderRadius?: Distance;
     thickness?: Distance;
@@ -28716,6 +28721,7 @@ declare const boardProps: z.ZodObject<{
     material: z.ZodDefault<z.ZodEnum<["fr4", "fr1", "flex"]>>;
     layers: z.ZodDefault<z.ZodUnion<[z.ZodLiteral<1>, z.ZodLiteral<2>, z.ZodLiteral<4>, z.ZodLiteral<6>, z.ZodLiteral<8>, z.ZodLiteral<10>]>>;
     allowBlindAndBuriedVias: z.ZodDefault<z.ZodBoolean>;
+    routeRemaining: z.ZodOptional<z.ZodBoolean>;
     defaultViaTenting: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodBoolean, z.ZodEnum<["both_sides", "top_and_bottom_tented", "top_tented", "bottom_tented", "exposed"]>]>, "top_and_bottom_tented" | "top_tented" | "bottom_tented" | "exposed", boolean | "both_sides" | "top_and_bottom_tented" | "top_tented" | "bottom_tented" | "exposed">>;
     borderRadius: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     thickness: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -29112,6 +29118,7 @@ declare const boardProps: z.ZodObject<{
     schMatchAdapt?: boolean | undefined;
     title?: string | undefined;
     fabricatorPreset?: "jlcpcb_economy" | "jlcpcb_standard" | "jlcpcb_economy_20260912" | "jlcpcb_standard_20260912" | undefined;
+    routeRemaining?: boolean | undefined;
     defaultViaTenting?: "top_and_bottom_tented" | "top_tented" | "bottom_tented" | "exposed" | undefined;
     borderRadius?: number | undefined;
     boardAnchorPosition?: {
@@ -29462,6 +29469,7 @@ declare const boardProps: z.ZodObject<{
     fabricatorPreset?: "jlcpcb_economy" | "jlcpcb_standard" | "jlcpcb_economy_20260912" | "jlcpcb_standard_20260912" | undefined;
     material?: "flex" | "fr4" | "fr1" | undefined;
     allowBlindAndBuriedVias?: boolean | undefined;
+    routeRemaining?: boolean | undefined;
     defaultViaTenting?: boolean | "both_sides" | "top_and_bottom_tented" | "top_tented" | "bottom_tented" | "exposed" | undefined;
     borderRadius?: string | number | undefined;
     boardAnchorPosition?: {
@@ -102739,6 +102747,7 @@ declare const stampboardProps: z.ZodObject<{
     material: z.ZodDefault<z.ZodEnum<["fr4", "fr1", "flex"]>>;
     layers: z.ZodDefault<z.ZodUnion<[z.ZodLiteral<1>, z.ZodLiteral<2>, z.ZodLiteral<4>, z.ZodLiteral<6>, z.ZodLiteral<8>, z.ZodLiteral<10>]>>;
     allowBlindAndBuriedVias: z.ZodDefault<z.ZodBoolean>;
+    routeRemaining: z.ZodOptional<z.ZodBoolean>;
     defaultViaTenting: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodBoolean, z.ZodEnum<["both_sides", "top_and_bottom_tented", "top_tented", "bottom_tented", "exposed"]>]>, "top_and_bottom_tented" | "top_tented" | "bottom_tented" | "exposed", boolean | "both_sides" | "top_and_bottom_tented" | "top_tented" | "bottom_tented" | "exposed">>;
     borderRadius: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     thickness: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -103150,6 +103159,7 @@ declare const stampboardProps: z.ZodObject<{
     schMatchAdapt?: boolean | undefined;
     title?: string | undefined;
     fabricatorPreset?: "jlcpcb_economy" | "jlcpcb_standard" | "jlcpcb_economy_20260912" | "jlcpcb_standard_20260912" | undefined;
+    routeRemaining?: boolean | undefined;
     defaultViaTenting?: "top_and_bottom_tented" | "top_tented" | "bottom_tented" | "exposed" | undefined;
     borderRadius?: number | undefined;
     boardAnchorPosition?: {
@@ -103510,6 +103520,7 @@ declare const stampboardProps: z.ZodObject<{
     fabricatorPreset?: "jlcpcb_economy" | "jlcpcb_standard" | "jlcpcb_economy_20260912" | "jlcpcb_standard_20260912" | undefined;
     material?: "flex" | "fr4" | "fr1" | undefined;
     allowBlindAndBuriedVias?: boolean | undefined;
+    routeRemaining?: boolean | undefined;
     defaultViaTenting?: boolean | "both_sides" | "top_and_bottom_tented" | "top_tented" | "bottom_tented" | "exposed" | undefined;
     borderRadius?: string | number | undefined;
     boardAnchorPosition?: {

package/dist/index.js

@@ -16467,6 +16467,7 @@ var autorouterConfig = z43.object({
     "laser_prefab",
     "single_layer_fanout",
     "fanout",
+    "bus_lanes",
     "auto-jumper",
     "sequential-trace",
     "auto-local",
@@ -16490,6 +16491,7 @@ var autorouterPreset = z43.union([
   // Prefabricated PCB with laser copper ablation
   z43.literal("single_layer_fanout"),
   z43.literal("fanout"),
+  z43.literal("bus_lanes"),
   z43.literal("auto-jumper"),
   z43.literal("sequential-trace"),
   z43.literal("auto-local"),
@@ -16715,6 +16717,9 @@ var boardProps = subcircuitGroupProps.omit({ connections: true }).extend({
   allowBlindAndBuriedVias: z44.boolean().default(false).describe(
     "Whether the autorouter may generate blind and buried vias. Defaults to false, which restricts newly generated vias to the full board stack."
   ),
+  routeRemaining: z44.boolean().optional().describe(
+    "Whether to route remaining unrouted connections after explicit routing phases. Boolean values are preserved; omitted leaves the setting unset. No aliases or prop conflicts are introduced, and existing boards require no migration."
+  ),
   defaultViaTenting: z44.union([
     z44.boolean(),
     z44.enum([