@tscircuit/props 0.0.627 → 0.0.628

package/README.md

@@ -1513,6 +1513,27 @@ export interface PinHeaderProps extends CommonComponentProps {
    */
   gender?: "male" | "female" | "unpopulated";
 
+  /**
+   * Mount the header on the top of the board, so it is connected to from
+   * above. An alias for `layer: "top"`, which is the default.
+   *
+   * Which side of the board a part sits on is `layer`, and only `layer`: the
+   * 3D model is always drawn top-side and consumers flip it for a bottom-layer
+   * component. Prefer these names on a connector, where "which side does the
+   * mating connector come from" is the question actually being asked.
+   */
+  connectsFromAbove?: boolean;
+
+  /**
+   * Mount the header on the underside of the board, so it is connected to from
+   * below. An alias for `layer: "bottom"`.
+   *
+   * Not to be confused with `invert` on a footprint string, which installs a
+   * header BACKWARDS on whichever side it is on — long pins through the board
+   * rather than short ones.
+   */
+  connectsFromBelow?: boolean;
+
   /**
    * Whether to show pin labels in silkscreen
    */

package/dist/index.d.ts

@@ -20584,6 +20584,60 @@ type Connections<PinLabel extends string = string> = Partial<Record<PinLabel, Co
  */
 type Selectors = Record<string, Connections>;
 
+interface ImplicitBreakoutPoint {
+    readonly x: number;
+    readonly y: number;
+}
+interface ImplicitBreakoutBounds {
+    readonly minX: number;
+    readonly maxX: number;
+    readonly minY: number;
+    readonly maxY: number;
+}
+type ImplicitBreakoutEdge = "left" | "right" | "bottom" | "top";
+interface ImplicitBreakoutRegion {
+    readonly regionId: string;
+    readonly bounds: ImplicitBreakoutBounds;
+    readonly edge: ImplicitBreakoutEdge;
+}
+interface ImplicitBreakoutConnectionEndpoint {
+    readonly regionId: string;
+    readonly position: ImplicitBreakoutPoint;
+}
+interface ImplicitBreakoutConnection {
+    readonly connectionId: string;
+    readonly endpoints: readonly ImplicitBreakoutConnectionEndpoint[];
+}
+interface ImplicitBreakoutDifferentialPair {
+    readonly type: "differential";
+    readonly connections: readonly [
+        ImplicitBreakoutConnection,
+        ImplicitBreakoutConnection
+    ];
+}
+type ImplicitBreakoutConnectionOrDifferentialPair = ImplicitBreakoutConnection | ImplicitBreakoutDifferentialPair;
+interface ImplicitBreakoutBus {
+    readonly busId: string;
+    readonly connectionIds: readonly string[];
+    /** Ordered candidate layers that the solver may distribute this bus over. */
+    readonly targetLayers?: readonly string[];
+}
+interface ImplicitBreakoutPointSolverInput {
+    readonly regions: readonly ImplicitBreakoutRegion[];
+    readonly connections: readonly ImplicitBreakoutConnectionOrDifferentialPair[];
+    readonly buses: readonly ImplicitBreakoutBus[];
+    readonly boundaryPointSpacing: number;
+}
+interface ImplicitBreakoutSolverPoint extends ImplicitBreakoutPoint {
+    readonly regionId: string;
+    readonly connectionId: string;
+    readonly layer: string;
+}
+interface ImplicitBreakoutPointSolverOutput {
+    readonly breakoutPoints: readonly ImplicitBreakoutSolverPoint[];
+}
+type ImplicitBreakoutPointSolverFn = (input: ImplicitBreakoutPointSolverInput) => ImplicitBreakoutPointSolverOutput | Promise<ImplicitBreakoutPointSolverOutput>;
+
 declare const layoutConfig: z.ZodObject<{
     layoutMode: z.ZodOptional<z.ZodEnum<["grid", "flex", "match-adapt", "relative", "none"]>>;
     position: z.ZodOptional<z.ZodEnum<["absolute", "relative"]>>;
@@ -20875,6 +20929,8 @@ interface AutorouterConfig {
     groupMode?: "sequential_trace" | "subcircuit" | /** @deprecated Use "sequential_trace" */ "sequential-trace";
     local?: boolean;
     algorithmFn?: (simpleRouteJson: any) => Promise<any>;
+    /** Override the solver used to place implicit breakout points. */
+    implicitBreakoutPointSolverFn?: ImplicitBreakoutPointSolverFn;
     preset?: "sequential_trace" | "subcircuit" | "default" | "auto" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "laser_prefab" | "single_layer_fanout" | "fanout" | /** @deprecated Use "auto_jumper" */ "auto-jumper" | /** @deprecated Use "sequential_trace" */ "sequential-trace" | /** @deprecated Use "auto_local" */ "auto-local" | /** @deprecated Use "auto_cloud" */ "auto-cloud";
 }
 type AutorouterPreset = "sequential_trace" | "subcircuit" | "default" | "auto" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "laser_prefab" | "single_layer_fanout" | "fanout" | "auto-jumper" | "sequential-trace" | "auto-local" | "auto-cloud";
@@ -20921,6 +20977,7 @@ declare const autorouterConfig: z.ZodObject<{
     allowViaInPad: z.ZodOptional<z.ZodBoolean>;
     groupMode: z.ZodOptional<z.ZodEnum<["sequential_trace", "subcircuit", "sequential-trace"]>>;
     algorithmFn: z.ZodOptional<z.ZodType<(simpleRouteJson: any) => Promise<any>, z.ZodTypeDef, (simpleRouteJson: any) => Promise<any>>>;
+    implicitBreakoutPointSolverFn: z.ZodOptional<z.ZodType<ImplicitBreakoutPointSolverFn, z.ZodTypeDef, ImplicitBreakoutPointSolverFn>>;
     preset: z.ZodOptional<z.ZodEnum<["sequential_trace", "subcircuit", "default", "auto", "auto_local", "auto_cloud", "auto_jumper", "tscircuit_beta", "krt", "freerouting", "laser_prefab", "single_layer_fanout", "fanout", "auto-jumper", "sequential-trace", "auto-local", "auto-cloud"]>>;
     local: z.ZodOptional<z.ZodBoolean>;
 }, "strip", z.ZodTypeAny, {
@@ -20934,6 +20991,7 @@ declare const autorouterConfig: z.ZodObject<{
     allowViaInPad?: boolean | undefined;
     groupMode?: "sequential_trace" | "subcircuit" | "sequential-trace" | undefined;
     algorithmFn?: ((simpleRouteJson: any) => Promise<any>) | undefined;
+    implicitBreakoutPointSolverFn?: ImplicitBreakoutPointSolverFn | undefined;
     preset?: "default" | "auto" | "sequential_trace" | "subcircuit" | "sequential-trace" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "laser_prefab" | "single_layer_fanout" | "fanout" | "auto-jumper" | "auto-local" | "auto-cloud" | undefined;
     local?: boolean | undefined;
 }, {
@@ -20947,6 +21005,7 @@ declare const autorouterConfig: z.ZodObject<{
     allowViaInPad?: boolean | undefined;
     groupMode?: "sequential_trace" | "subcircuit" | "sequential-trace" | undefined;
     algorithmFn?: ((simpleRouteJson: any) => Promise<any>) | undefined;
+    implicitBreakoutPointSolverFn?: ImplicitBreakoutPointSolverFn | undefined;
     preset?: "default" | "auto" | "sequential_trace" | "subcircuit" | "sequential-trace" | "auto_local" | "auto_cloud" | "auto_jumper" | "tscircuit_beta" | "krt" | "freerouting" | "laser_prefab" | "single_layer_fanout" | "fanout" | "auto-jumper" | "auto-local" | "auto-cloud" | undefined;
     local?: boolean | undefined;
 }>;
@@ -220152,4 +220211,4 @@ interface ProjectConfig extends Pick<PlatformConfig, "projectName" | "projectBas
 }
 declare const projectConfig: z.ZodType<ProjectConfig>;
 
-export { type AmmeterPinLabels, type AmmeterProps, type AnalogAcSweepSimulationProps, type AnalogAnalysisSimulationBaseProps, type AnalogCapacitanceSweepParameterProps, type AnalogCurrentSweepParameterProps, type AnalogDcOperatingPointSimulationProps, type AnalogDcSweepSimulationProps, type AnalogInductanceSweepParameterProps, type AnalogResistanceSweepParameterProps, type AnalogSimulationProps, type AnalogSweepParameterProps, type AnalogTransientSimulationProps, type AnalogVoltageSweepParameterProps, type AssemblyDeviceProps, type AssemblyDevicePropsInput, type AutocompleteString, type AutorouterConfig, type AutorouterDefinition, type AutorouterInstance, type AutorouterPreset, type AutorouterProp, type AutorouterVersion, type AutoroutingPhaseProps, type BaseGroupProps, type BaseManualEditEvent, type BaseManualEditEventInput, type BasicFootprint, type BatteryPinLabels, type BatteryProps, type BoardColor, type BoardColorPreset, type BoardProps, type Border, type BreakoutPointProps, type BreakoutProps, type BusFanoutDirection, type BusName, type BusProps, type CadAssemblyProps, type CadAssemblyPropsInput, type CadModelAxisDirection, type CadModelBase, type CadModelFootprinterString, type CadModelGlb, type CadModelGltf, type CadModelJscad, type CadModelObj, type CadModelProp, type CadModelProps, type CadModelPropsInput, type CadModelStep, type CadModelStl, type CadModelWrl, type CapacitorPinLabels, type CapacitorProps, type ChipConnections, type ChipPinLabels, type ChipProps, type ChipPropsSU, type CircleCutoutProps, type CircleEnclosureCutoutApertureProps, type CircleHoleProps, type CirclePlatedHoleProps, type CircleShapeProps, type CircleSmtPadProps, type CircleSolderPasteProps, type CircuitJson, type CircularHoleWithRectPlatedProps, type CommonComponentProps, type CommonLayoutProps, type CommonShapeProps, type ComponentProps, type ConnectionTarget, type Connections, type ConnectorProps, type ConnectorStandard, type ConstrainedLayoutProps, type ConstraintProps, type CopperPourProps, type CopperPourPropsInput, type CopperTextProps, type CourtyardCircleProps, type CourtyardOutlineProps, type CourtyardPillProps, type CourtyardRectProps, type CrystalPinLabels, type CrystalProps, type CurrentSourcePinLabels, type CurrentSourceProps, type CustomDrcCheckContext, type CustomDrcCheckFn, type CustomDrcCheckInput, type CustomDrcConnectable, type CustomDrcSelect, type CustomDrcSelectAll, type CutoutApertureProps, type CutoutProps, type CutoutPropsInput, type DifferentialPairProps, type DiodePinLabels, type DiodePinLabelsProp, type DiodeProps, type Direction, type DirectionAlongEdge, type DirectionalFanoutBoundaryPadding, type DrcCheckProps, type EditPcbComponentLocationEvent, type EditPcbComponentLocationEventInput, type EditPcbGroupLocationEvent, type EditPcbGroupLocationEventInput, type EditSchematicComponentLocationEvent, type EditSchematicComponentLocationEventInput, type EditSchematicGroupLocationEvent, type EditSchematicGroupLocationEventInput, type EditTraceHintEvent, type EditTraceHintEventInput, type EnclosureCutoutApertureProps, type EnclosureCutoutApertureShape, type EnclosureFdmBoxProps, type EnclosureFdmBoxPropsInput, type FabricationNoteDimensionProps, type FabricationNoteDimensionPropsInput, type FabricationNotePathProps, type FabricationNoteRectProps, type FabricationNoteTextProps, type FabricationNoteTextPropsInput, type FanoutBoundaryPadding, type FanoutPourNetMap, type FanoutProps, type FiducialProps, type FootprintFileParserEntry, type FootprintInsertionDirection, type FootprintLibraryResult, type FootprintProp, type FootprintProps, type FootprintPropsInput, type FootprintSoupElements, type FootprinterAutocompleteString, type FootprinterStringExample, type FusePinLabels, type FuseProps, type GroupProps, type HoleProps, type HoleWithPolygonPadPlatedHoleProps, type InductorPinLabels, type InductorProps, type InferredChipProps, type InferredConstrainedLayoutProps, type InferredDiodeProps, type InferredFuseProps, type InferredHoleProps, type InferredSchematicArcProps, type InferredSchematicBoxProps, type InferredSchematicCircleProps, type InferredSchematicLineProps, type InferredSchematicPathProps, type InferredSchematicRectProps, type InferredSchematicSectionProps, type InferredSchematicSheetProps, type InferredSchematicSymbolProps, type InferredSchematicTextProps, type InferredSmtPadProps, type InferredSolderPasteProps, type InferredSwitchProps, type InferredTestpointProps, type InferredViaProps, type InterconnectProps, type InternalCircuitElement, type InternalCircuitProps, type JlcpcbAutocompleteStringPath, type JlcpcbKnownPartNumber, type JumperProps, type KicadAt, type KicadAutocompleteStringPath, type KicadEffects, type KicadFont, type KicadFootprintAttributes, type KicadFootprintMetadata, type KicadFootprintModel, type KicadFootprintPad, type KicadFootprintProperties, type KicadPath, type KicadPinElectricalType, type KicadPinGraphicStyle, type KicadPinMetadata, type KicadProperty, type KicadSymbolEffects, type KicadSymbolMetadata, type KicadSymbolPinNames, type KicadSymbolPinNumbers, type KicadSymbolProperties, type KicadSymbolProperty, type LayoutConfig, type LedPinLabels, type LedProps, type LocalCacheEngine, type ManualEditEvent, type ManualEditEventInput, type ManualEditsFile, type ManualEditsFileInput, type ManualPcbPlacement, type ManualPcbPlacementInput, type ManualSchematicPlacement, type ManualSchematicPlacementInput, type ManualTraceHint, type ManualTraceHintInput, type MosfetPinLabels, type MosfetProps, type MountedBoardProps, type NetAliasProps, type NetLabelProps, type NetProps, type NinePointAnchor, type NonSubcircuitGroupProps, type OpAmpPinLabels, type OpAmpProps, type OvalHoleProps, type OvalPlatedHoleProps, type PanelProps, type ParsedEnclosureCutoutApertureProps, type PartsEngine, type PcbKeepoutProps, type PcbLayoutProps, type PcbNoteDimensionProps, type PcbNoteDimensionPropsInput, type PcbNoteLineProps, type PcbNoteLinePropsInput, type PcbNotePathProps, type PcbNotePathPropsInput, type PcbNoteRectProps, type PcbNoteRectPropsInput, type PcbNoteTextProps, type PcbNoteTextPropsInput, type PcbPositionMode, type PcbRouteCache, type PcbSameXConstraint, type PcbSameYConstraint, type PcbStyle, type PcbSx, type PcbSxSelector, type PcbSxValue, type PcbTraceProps, type PcbXDistConstraint, type PcbYDistConstraint, type PillEnclosureCutoutApertureProps, type PillHoleProps, type PillPlatedHoleProps, type PillShapeProps, type PillSmtPadProps, type PillWithRectPadPlatedHoleProps, type PinAttributeMap, type PinCapability, type PinCompatibleVariant, type PinHeaderProps, type PinLabelFromPinLabelMap, type PinLabelsProp, type PinSideDefinition, type PinSideDefinitionInput, type PinVariant, type PinoutProps, type PlatedHoleProps, type PlatformConfig, type PolygonCutoutProps, type PolygonSmtPadProps, type PortHints, type PortProps, type PositionMode, type PotentiometerPinLabels, type PotentiometerPinVariant, type PotentiometerProps, type PowerSourceProps, type ProjectConfig, type PushButtonProps, type RectCutoutProps, type RectEnclosureCutoutApertureProps, type RectHoleProps, type RectShapeProps, type RectSmtPadProps, type RectSolderPasteProps, type ResistorPinLabels, type ResistorProps, type ResonatorPinVariant, type ResonatorProps, type RotatedPillSmtPadProps, type RotatedRectSmtPadProps, type RoutingTolerances, type SchStyle, type SchematicArcProps, type SchematicBoxProps, type SchematicCellProps, type SchematicCircleProps, type SchematicLineProps, type SchematicOrientation, type SchematicPathProps, type SchematicPinArrangement, type SchematicPinArrangementWithPinCounts, type SchematicPinArrangementWithSides, type SchematicPinArrangementWithSizes, type SchematicPinLabel, type SchematicPinStyle, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicRectProps, type SchematicRowProps, type SchematicSectionProps, type SchematicSheetProps, type SchematicSymbolProps, type SchematicSymbolSize, type SchematicTableProps, type SchematicTextProps, type SelectionResult, type SelectionResultComponent, type SelectionResultNet, type SelectionResultPort, type Selectors, type SilkscreenCircleProps, type SilkscreenGraphicProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SimpleRouteJson, type SmtPadProps, type SolderJumperProps, type SolderPasteProps, type SpiceEngine, type SpiceEngineSimulationResult, type SpiceModelElement, type SpiceModelProps, type SpiceOptions, type StampboardProps, type SubcircuitGroupProps, type SubcircuitGroupPropsWithBool, type SubcircuitProps, type SubpanelProps, type SupplierName, type SupplierPartNumbers, type SupplierProps, type SwitchProps, type SymbolProp, type SymbolProps, type SymbolPropsInput, type TestpointConnections, type TestpointPinLabels, type TestpointProps, type ToolingrailProps, type TraceHintProps, type TraceProps, type TransistorPinLabels, type TransistorProps, type ViaProps, type VoltageProbeProps, type VoltageSourcePinLabels, type VoltageSourceProps, type WaveShape, ammeterPinLabels, ammeterPins, ammeterProps, analogAcSweepSimulationProps, analogAnalysisSimulationBaseProps, analogCapacitanceSweepParameterProps, analogCurrentSweepParameterProps, analogDcOperatingPointSimulationProps, analogDcSweepSimulationProps, analogInductanceSweepParameterProps, analogResistanceSweepParameterProps, analogSimulationProps, analogSweepParameterProps, analogTransientSimulationProps, analogVoltageSweepParameterProps, assemblyDeviceProps, assemblyProps, autorouterConfig, autorouterEffortLevel, autorouterPreset, autorouterProp, autoroutingPhaseProps, baseGroupProps, base_manual_edit_event, batteryPins, batteryProps, boardProps, border, breakoutPointProps, breakoutProps, bugProps, busFanoutDirection, busProps, cadModelAxisDirection, cadModelAxisDirections, cadModelBase, cadModelGlb, cadModelGltf, cadModelJscad, cadModelObj, cadModelProp, cadModelStep, cadModelStl, cadModelWrl, cadassemblyProps, cadmodelProps, capacitorPinLabels, capacitorPins, capacitorProps, chipProps, circleCutoutProps, circleShapeProps, circleSmtPadProps, circleSolderPasteProps, commonComponentProps, commonLayoutProps, commonShapeProps, componentProps, connectorProps, connectorStandard, constrainedLayoutProps, constraintProps, copperPourProps, copperTextProps, courtyardCircleProps, courtyardOutlineProps, courtyardPillProps, courtyardRectProps, crystalPins, crystalProps, currentSourcePinLabels, currentSourcePins, currentSourceProps, customDrcCheckFn, cutoutApertureBaseProps, cutoutProps, differentialPairProps, diodePinLabelsProp, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, drcCheckProps, edit_component_location_event, edit_pcb_component_location_event, edit_pcb_group_location_event, edit_schematic_component_location_event, edit_schematic_group_location_event, edit_trace_hint_event, enclosureCutoutApertureProps, enclosureCutoutApertureShapes, enclosureFdmBoxProps, enclosureProps, explicitPinSideDefinition, fabricationNoteDimensionProps, fabricationNotePathProps, fabricationNoteRectProps, fabricationNoteTextProps, fanoutBoundaryPadding, fanoutProps, fiducialProps, footprintInsertionDirection, footprintProp, footprintProps, footprinterStringExamples, fusePinLabels, fuseProps, groupProps, holeProps, inductorPins, inductorProps, interconnectProps, internalCircuitProps, jumperProps, kicadAt, kicadEffects, kicadFont, kicadFootprintAttributes, kicadFootprintKeys, kicadFootprintMetadata, kicadFootprintModel, kicadFootprintPad, kicadFootprintProperties, kicadFootprintStrings, kicadPinElectricalType, kicadPinGraphicStyle, kicadPinMetadata, kicadProperty, kicadSymbolEffects, kicadSymbolMetadata, kicadSymbolPinNames, kicadSymbolPinNumbers, kicadSymbolProperties, kicadSymbolProperty, layoutConfig, ledPins, ledProps, lrPins, lrPolarPins, manual_edit_event, manual_edits_file, manual_pcb_placement, manual_schematic_placement, manual_trace_hint, mosfetPins, mosfetProps, mountedboardProps, netAliasProps, netLabelProps, netProps, ninePointAnchor, opampPinLabels, opampPins, opampProps, panelProps, partsEngine, pcbKeepoutProps, pcbLayoutProps, pcbNoteDimensionProps, pcbNoteLineProps, pcbNotePathProps, pcbNoteRectProps, pcbNoteTextProps, pcbSameXConstraintProps, pcbSameYConstraintProps, pcbStyle, pcbSx, pcbSxValue, pcbTraceProps, pcbXDistConstraintProps, pcbYDistConstraintProps, pillShapeProps, pillSmtPadProps, pinAttributeMap, pinCapability, pinCompatibleVariant, pinHeaderProps, pinLabelsProp, pinoutProps, platedHoleProps, platformConfig, point3, polygonCutoutProps, polygonSmtPadProps, portHints, portProps, portRef, potentiometerPinLabels, potentiometerProps, powerSourceProps, projectConfig, pushButtonProps, rectCutoutProps, rectShapeProps, rectSmtPadProps, rectSolderPasteProps, resistorPinLabels, resistorPins, resistorProps, resonatorProps, rotatedPillSmtPadProps, rotatedRectSmtPadProps, rotationPoint3, routeHintPointProps, routingTolerances, schStyle, schematicArcProps, schematicBoxProps, schematicCellProps, schematicCircleProps, schematicLineProps, schematicOrientation, schematicPathProps, schematicPinArrangement, schematicPinLabel, schematicPinStyle, schematicPortArrangement, schematicRectProps, schematicRowProps, schematicSectionProps, schematicSheetProps, schematicSymbolProps, schematicSymbolSize, schematicTableProps, schematicTextProps, silkscreenCircleProps, silkscreenGraphicProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, solderPasteProps, solderjumperProps, spicemodelProps, stampboardProps, subcircuitGroupProps, subcircuitGroupPropsWithBool, subcircuitProps, subpanelProps, supplierProps, switchProps, symbolProp, symbolProps, testpointPins, testpointProps, toolingrailProps, traceHintProps, traceProps, transistorPins, transistorPinsLabels, transistorProps, viaProps, voltageProbeProps, voltageSourcePinLabels, voltageSourcePins, voltageSourceProps };
+export { type AmmeterPinLabels, type AmmeterProps, type AnalogAcSweepSimulationProps, type AnalogAnalysisSimulationBaseProps, type AnalogCapacitanceSweepParameterProps, type AnalogCurrentSweepParameterProps, type AnalogDcOperatingPointSimulationProps, type AnalogDcSweepSimulationProps, type AnalogInductanceSweepParameterProps, type AnalogResistanceSweepParameterProps, type AnalogSimulationProps, type AnalogSweepParameterProps, type AnalogTransientSimulationProps, type AnalogVoltageSweepParameterProps, type AssemblyDeviceProps, type AssemblyDevicePropsInput, type AutocompleteString, type AutorouterConfig, type AutorouterDefinition, type AutorouterInstance, type AutorouterPreset, type AutorouterProp, type AutorouterVersion, type AutoroutingPhaseProps, type BaseGroupProps, type BaseManualEditEvent, type BaseManualEditEventInput, type BasicFootprint, type BatteryPinLabels, type BatteryProps, type BoardColor, type BoardColorPreset, type BoardProps, type Border, type BreakoutPointProps, type BreakoutProps, type BusFanoutDirection, type BusName, type BusProps, type CadAssemblyProps, type CadAssemblyPropsInput, type CadModelAxisDirection, type CadModelBase, type CadModelFootprinterString, type CadModelGlb, type CadModelGltf, type CadModelJscad, type CadModelObj, type CadModelProp, type CadModelProps, type CadModelPropsInput, type CadModelStep, type CadModelStl, type CadModelWrl, type CapacitorPinLabels, type CapacitorProps, type ChipConnections, type ChipPinLabels, type ChipProps, type ChipPropsSU, type CircleCutoutProps, type CircleEnclosureCutoutApertureProps, type CircleHoleProps, type CirclePlatedHoleProps, type CircleShapeProps, type CircleSmtPadProps, type CircleSolderPasteProps, type CircuitJson, type CircularHoleWithRectPlatedProps, type CommonComponentProps, type CommonLayoutProps, type CommonShapeProps, type ComponentProps, type ConnectionTarget, type Connections, type ConnectorProps, type ConnectorStandard, type ConstrainedLayoutProps, type ConstraintProps, type CopperPourProps, type CopperPourPropsInput, type CopperTextProps, type CourtyardCircleProps, type CourtyardOutlineProps, type CourtyardPillProps, type CourtyardRectProps, type CrystalPinLabels, type CrystalProps, type CurrentSourcePinLabels, type CurrentSourceProps, type CustomDrcCheckContext, type CustomDrcCheckFn, type CustomDrcCheckInput, type CustomDrcConnectable, type CustomDrcSelect, type CustomDrcSelectAll, type CutoutApertureProps, type CutoutProps, type CutoutPropsInput, type DifferentialPairProps, type DiodePinLabels, type DiodePinLabelsProp, type DiodeProps, type Direction, type DirectionAlongEdge, type DirectionalFanoutBoundaryPadding, type DrcCheckProps, type EditPcbComponentLocationEvent, type EditPcbComponentLocationEventInput, type EditPcbGroupLocationEvent, type EditPcbGroupLocationEventInput, type EditSchematicComponentLocationEvent, type EditSchematicComponentLocationEventInput, type EditSchematicGroupLocationEvent, type EditSchematicGroupLocationEventInput, type EditTraceHintEvent, type EditTraceHintEventInput, type EnclosureCutoutApertureProps, type EnclosureCutoutApertureShape, type EnclosureFdmBoxProps, type EnclosureFdmBoxPropsInput, type FabricationNoteDimensionProps, type FabricationNoteDimensionPropsInput, type FabricationNotePathProps, type FabricationNoteRectProps, type FabricationNoteTextProps, type FabricationNoteTextPropsInput, type FanoutBoundaryPadding, type FanoutPourNetMap, type FanoutProps, type FiducialProps, type FootprintFileParserEntry, type FootprintInsertionDirection, type FootprintLibraryResult, type FootprintProp, type FootprintProps, type FootprintPropsInput, type FootprintSoupElements, type FootprinterAutocompleteString, type FootprinterStringExample, type FusePinLabels, type FuseProps, type GroupProps, type HoleProps, type HoleWithPolygonPadPlatedHoleProps, type ImplicitBreakoutBounds, type ImplicitBreakoutBus, type ImplicitBreakoutConnection, type ImplicitBreakoutConnectionEndpoint, type ImplicitBreakoutConnectionOrDifferentialPair, type ImplicitBreakoutDifferentialPair, type ImplicitBreakoutEdge, type ImplicitBreakoutPoint, type ImplicitBreakoutPointSolverFn, type ImplicitBreakoutPointSolverInput, type ImplicitBreakoutPointSolverOutput, type ImplicitBreakoutRegion, type ImplicitBreakoutSolverPoint, type InductorPinLabels, type InductorProps, type InferredChipProps, type InferredConstrainedLayoutProps, type InferredDiodeProps, type InferredFuseProps, type InferredHoleProps, type InferredSchematicArcProps, type InferredSchematicBoxProps, type InferredSchematicCircleProps, type InferredSchematicLineProps, type InferredSchematicPathProps, type InferredSchematicRectProps, type InferredSchematicSectionProps, type InferredSchematicSheetProps, type InferredSchematicSymbolProps, type InferredSchematicTextProps, type InferredSmtPadProps, type InferredSolderPasteProps, type InferredSwitchProps, type InferredTestpointProps, type InferredViaProps, type InterconnectProps, type InternalCircuitElement, type InternalCircuitProps, type JlcpcbAutocompleteStringPath, type JlcpcbKnownPartNumber, type JumperProps, type KicadAt, type KicadAutocompleteStringPath, type KicadEffects, type KicadFont, type KicadFootprintAttributes, type KicadFootprintMetadata, type KicadFootprintModel, type KicadFootprintPad, type KicadFootprintProperties, type KicadPath, type KicadPinElectricalType, type KicadPinGraphicStyle, type KicadPinMetadata, type KicadProperty, type KicadSymbolEffects, type KicadSymbolMetadata, type KicadSymbolPinNames, type KicadSymbolPinNumbers, type KicadSymbolProperties, type KicadSymbolProperty, type LayoutConfig, type LedPinLabels, type LedProps, type LocalCacheEngine, type ManualEditEvent, type ManualEditEventInput, type ManualEditsFile, type ManualEditsFileInput, type ManualPcbPlacement, type ManualPcbPlacementInput, type ManualSchematicPlacement, type ManualSchematicPlacementInput, type ManualTraceHint, type ManualTraceHintInput, type MosfetPinLabels, type MosfetProps, type MountedBoardProps, type NetAliasProps, type NetLabelProps, type NetProps, type NinePointAnchor, type NonSubcircuitGroupProps, type OpAmpPinLabels, type OpAmpProps, type OvalHoleProps, type OvalPlatedHoleProps, type PanelProps, type ParsedEnclosureCutoutApertureProps, type PartsEngine, type PcbKeepoutProps, type PcbLayoutProps, type PcbNoteDimensionProps, type PcbNoteDimensionPropsInput, type PcbNoteLineProps, type PcbNoteLinePropsInput, type PcbNotePathProps, type PcbNotePathPropsInput, type PcbNoteRectProps, type PcbNoteRectPropsInput, type PcbNoteTextProps, type PcbNoteTextPropsInput, type PcbPositionMode, type PcbRouteCache, type PcbSameXConstraint, type PcbSameYConstraint, type PcbStyle, type PcbSx, type PcbSxSelector, type PcbSxValue, type PcbTraceProps, type PcbXDistConstraint, type PcbYDistConstraint, type PillEnclosureCutoutApertureProps, type PillHoleProps, type PillPlatedHoleProps, type PillShapeProps, type PillSmtPadProps, type PillWithRectPadPlatedHoleProps, type PinAttributeMap, type PinCapability, type PinCompatibleVariant, type PinHeaderProps, type PinLabelFromPinLabelMap, type PinLabelsProp, type PinSideDefinition, type PinSideDefinitionInput, type PinVariant, type PinoutProps, type PlatedHoleProps, type PlatformConfig, type PolygonCutoutProps, type PolygonSmtPadProps, type PortHints, type PortProps, type PositionMode, type PotentiometerPinLabels, type PotentiometerPinVariant, type PotentiometerProps, type PowerSourceProps, type ProjectConfig, type PushButtonProps, type RectCutoutProps, type RectEnclosureCutoutApertureProps, type RectHoleProps, type RectShapeProps, type RectSmtPadProps, type RectSolderPasteProps, type ResistorPinLabels, type ResistorProps, type ResonatorPinVariant, type ResonatorProps, type RotatedPillSmtPadProps, type RotatedRectSmtPadProps, type RoutingTolerances, type SchStyle, type SchematicArcProps, type SchematicBoxProps, type SchematicCellProps, type SchematicCircleProps, type SchematicLineProps, type SchematicOrientation, type SchematicPathProps, type SchematicPinArrangement, type SchematicPinArrangementWithPinCounts, type SchematicPinArrangementWithSides, type SchematicPinArrangementWithSizes, type SchematicPinLabel, type SchematicPinStyle, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicRectProps, type SchematicRowProps, type SchematicSectionProps, type SchematicSheetProps, type SchematicSymbolProps, type SchematicSymbolSize, type SchematicTableProps, type SchematicTextProps, type SelectionResult, type SelectionResultComponent, type SelectionResultNet, type SelectionResultPort, type Selectors, type SilkscreenCircleProps, type SilkscreenGraphicProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SimpleRouteJson, type SmtPadProps, type SolderJumperProps, type SolderPasteProps, type SpiceEngine, type SpiceEngineSimulationResult, type SpiceModelElement, type SpiceModelProps, type SpiceOptions, type StampboardProps, type SubcircuitGroupProps, type SubcircuitGroupPropsWithBool, type SubcircuitProps, type SubpanelProps, type SupplierName, type SupplierPartNumbers, type SupplierProps, type SwitchProps, type SymbolProp, type SymbolProps, type SymbolPropsInput, type TestpointConnections, type TestpointPinLabels, type TestpointProps, type ToolingrailProps, type TraceHintProps, type TraceProps, type TransistorPinLabels, type TransistorProps, type ViaProps, type VoltageProbeProps, type VoltageSourcePinLabels, type VoltageSourceProps, type WaveShape, ammeterPinLabels, ammeterPins, ammeterProps, analogAcSweepSimulationProps, analogAnalysisSimulationBaseProps, analogCapacitanceSweepParameterProps, analogCurrentSweepParameterProps, analogDcOperatingPointSimulationProps, analogDcSweepSimulationProps, analogInductanceSweepParameterProps, analogResistanceSweepParameterProps, analogSimulationProps, analogSweepParameterProps, analogTransientSimulationProps, analogVoltageSweepParameterProps, assemblyDeviceProps, assemblyProps, autorouterConfig, autorouterEffortLevel, autorouterPreset, autorouterProp, autoroutingPhaseProps, baseGroupProps, base_manual_edit_event, batteryPins, batteryProps, boardProps, border, breakoutPointProps, breakoutProps, bugProps, busFanoutDirection, busProps, cadModelAxisDirection, cadModelAxisDirections, cadModelBase, cadModelGlb, cadModelGltf, cadModelJscad, cadModelObj, cadModelProp, cadModelStep, cadModelStl, cadModelWrl, cadassemblyProps, cadmodelProps, capacitorPinLabels, capacitorPins, capacitorProps, chipProps, circleCutoutProps, circleShapeProps, circleSmtPadProps, circleSolderPasteProps, commonComponentProps, commonLayoutProps, commonShapeProps, componentProps, connectorProps, connectorStandard, constrainedLayoutProps, constraintProps, copperPourProps, copperTextProps, courtyardCircleProps, courtyardOutlineProps, courtyardPillProps, courtyardRectProps, crystalPins, crystalProps, currentSourcePinLabels, currentSourcePins, currentSourceProps, customDrcCheckFn, cutoutApertureBaseProps, cutoutProps, differentialPairProps, diodePinLabelsProp, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, drcCheckProps, edit_component_location_event, edit_pcb_component_location_event, edit_pcb_group_location_event, edit_schematic_component_location_event, edit_schematic_group_location_event, edit_trace_hint_event, enclosureCutoutApertureProps, enclosureCutoutApertureShapes, enclosureFdmBoxProps, enclosureProps, explicitPinSideDefinition, fabricationNoteDimensionProps, fabricationNotePathProps, fabricationNoteRectProps, fabricationNoteTextProps, fanoutBoundaryPadding, fanoutProps, fiducialProps, footprintInsertionDirection, footprintProp, footprintProps, footprinterStringExamples, fusePinLabels, fuseProps, groupProps, holeProps, inductorPins, inductorProps, interconnectProps, internalCircuitProps, jumperProps, kicadAt, kicadEffects, kicadFont, kicadFootprintAttributes, kicadFootprintKeys, kicadFootprintMetadata, kicadFootprintModel, kicadFootprintPad, kicadFootprintProperties, kicadFootprintStrings, kicadPinElectricalType, kicadPinGraphicStyle, kicadPinMetadata, kicadProperty, kicadSymbolEffects, kicadSymbolMetadata, kicadSymbolPinNames, kicadSymbolPinNumbers, kicadSymbolProperties, kicadSymbolProperty, layoutConfig, ledPins, ledProps, lrPins, lrPolarPins, manual_edit_event, manual_edits_file, manual_pcb_placement, manual_schematic_placement, manual_trace_hint, mosfetPins, mosfetProps, mountedboardProps, netAliasProps, netLabelProps, netProps, ninePointAnchor, opampPinLabels, opampPins, opampProps, panelProps, partsEngine, pcbKeepoutProps, pcbLayoutProps, pcbNoteDimensionProps, pcbNoteLineProps, pcbNotePathProps, pcbNoteRectProps, pcbNoteTextProps, pcbSameXConstraintProps, pcbSameYConstraintProps, pcbStyle, pcbSx, pcbSxValue, pcbTraceProps, pcbXDistConstraintProps, pcbYDistConstraintProps, pillShapeProps, pillSmtPadProps, pinAttributeMap, pinCapability, pinCompatibleVariant, pinHeaderProps, pinLabelsProp, pinoutProps, platedHoleProps, platformConfig, point3, polygonCutoutProps, polygonSmtPadProps, portHints, portProps, portRef, potentiometerPinLabels, potentiometerProps, powerSourceProps, projectConfig, pushButtonProps, rectCutoutProps, rectShapeProps, rectSmtPadProps, rectSolderPasteProps, resistorPinLabels, resistorPins, resistorProps, resonatorProps, rotatedPillSmtPadProps, rotatedRectSmtPadProps, rotationPoint3, routeHintPointProps, routingTolerances, schStyle, schematicArcProps, schematicBoxProps, schematicCellProps, schematicCircleProps, schematicLineProps, schematicOrientation, schematicPathProps, schematicPinArrangement, schematicPinLabel, schematicPinStyle, schematicPortArrangement, schematicRectProps, schematicRowProps, schematicSectionProps, schematicSheetProps, schematicSymbolProps, schematicSymbolSize, schematicTableProps, schematicTextProps, silkscreenCircleProps, silkscreenGraphicProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, solderPasteProps, solderjumperProps, spicemodelProps, stampboardProps, subcircuitGroupProps, subcircuitGroupPropsWithBool, subcircuitProps, subpanelProps, supplierProps, switchProps, symbolProp, symbolProps, testpointPins, testpointProps, toolingrailProps, traceHintProps, traceProps, transistorPins, transistorPinsLabels, transistorProps, viaProps, voltageProbeProps, voltageSourcePinLabels, voltageSourcePins, voltageSourceProps };

package/dist/index.js

@@ -16374,6 +16374,9 @@ var autorouterConfig = z41.object({
   algorithmFn: z41.custom(
     (v) => typeof v === "function" || v === void 0
   ).optional(),
+  implicitBreakoutPointSolverFn: z41.custom(
+    (value) => typeof value === "function" || value === void 0
+  ).optional(),
   preset: z41.enum([
     "sequential_trace",
     "subcircuit",