@tscircuit/props 0.0.622 → 0.0.624

package/README.md

@@ -452,6 +452,10 @@ export interface BusProps {
   pcbTraceWidth?: number | string;
   /** PCB layers on which the bus may be routed. */
   pcbAllowedLayers?: LayerRefInput[];
+  /** Preferred PCB layer for routing the bus. */
+  preferredLayer?: LayerRefInput;
+  /** Preferred PCB layers for routing the bus, in priority order. */
+  preferredLayers?: LayerRefInput[];
 }
 ```
 
@@ -1327,8 +1331,13 @@ export interface PanelProps extends Omit<
    * If true, prevent a solder mask from being applied to this panel.
    */
   noSolderMask?: boolean;
-  /** Method for panelization */
-  panelizationMethod?: "tab-routing" | "none";
+  /**
+   * Method used to separate boards in the panel.
+   *
+   * `outline_routing` creates continuous routed cutouts around each board
+   * outline without tabs.
+   */
+  panelizationMethod?: "tab-routing" | "outline_routing" | "none";
   /** Gap between boards in a panel */
   boardGap?: Distance;
   layoutMode?: "grid" | "pack" | "none";

package/dist/index.d.ts

@@ -28935,8 +28935,13 @@ interface PanelProps extends Omit<BaseGroupProps, "height" | "layoutMode" | "wid
      * If true, prevent a solder mask from being applied to this panel.
      */
     noSolderMask?: boolean;
-    /** Method for panelization */
-    panelizationMethod?: "tab-routing" | "none";
+    /**
+     * Method used to separate boards in the panel.
+     *
+     * `outline_routing` creates continuous routed cutouts around each board
+     * outline without tabs.
+     */
+    panelizationMethod?: "tab-routing" | "outline_routing" | "none";
     /** Gap between boards in a panel */
     boardGap?: Distance;
     layoutMode?: "grid" | "pack" | "none";
@@ -29521,7 +29526,7 @@ declare const panelProps: z.ZodObject<Omit<{
     children: z.ZodOptional<z.ZodAny>;
     anchorAlignment: z.ZodOptional<z.ZodEnum<["top_left", "top_center", "top_right", "center_left", "center", "center_right", "bottom_left", "bottom_center", "bottom_right"]>>;
     noSolderMask: z.ZodOptional<z.ZodBoolean>;
-    panelizationMethod: z.ZodOptional<z.ZodEnum<["tab-routing", "none"]>>;
+    panelizationMethod: z.ZodOptional<z.ZodEnum<["tab-routing", "outline_routing", "none"]>>;
     boardGap: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     layoutMode: z.ZodOptional<z.ZodEnum<["grid", "pack", "none"]>>;
     row: z.ZodOptional<z.ZodNumber>;
@@ -29799,7 +29804,7 @@ declare const panelProps: z.ZodObject<Omit<{
     schMatchAdapt?: boolean | undefined;
     anchorAlignment?: "top_left" | "top_center" | "top_right" | "center_left" | "center" | "center_right" | "bottom_left" | "bottom_center" | "bottom_right" | undefined;
     noSolderMask?: boolean | undefined;
-    panelizationMethod?: "none" | "tab-routing" | undefined;
+    panelizationMethod?: "none" | "tab-routing" | "outline_routing" | undefined;
     boardGap?: number | undefined;
     col?: number | undefined;
     cellWidth?: number | undefined;
@@ -30076,7 +30081,7 @@ declare const panelProps: z.ZodObject<Omit<{
     schMatchAdapt?: boolean | undefined;
     anchorAlignment?: "top_left" | "top_center" | "top_right" | "center_left" | "center" | "center_right" | "bottom_left" | "bottom_center" | "bottom_right" | undefined;
     noSolderMask?: boolean | undefined;
-    panelizationMethod?: "none" | "tab-routing" | undefined;
+    panelizationMethod?: "none" | "tab-routing" | "outline_routing" | undefined;
     boardGap?: string | number | undefined;
     col?: number | undefined;
     cellWidth?: string | number | undefined;
@@ -30660,7 +30665,7 @@ declare const subpanelProps: z.ZodObject<Omit<{
     children: z.ZodOptional<z.ZodAny>;
     anchorAlignment: z.ZodOptional<z.ZodEnum<["top_left", "top_center", "top_right", "center_left", "center", "center_right", "bottom_left", "bottom_center", "bottom_right"]>>;
     noSolderMask: z.ZodOptional<z.ZodBoolean>;
-    panelizationMethod: z.ZodOptional<z.ZodEnum<["tab-routing", "none"]>>;
+    panelizationMethod: z.ZodOptional<z.ZodEnum<["tab-routing", "outline_routing", "none"]>>;
     boardGap: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     layoutMode: z.ZodOptional<z.ZodEnum<["grid", "pack", "none"]>>;
     row: z.ZodOptional<z.ZodNumber>;
@@ -30938,7 +30943,7 @@ declare const subpanelProps: z.ZodObject<Omit<{
     schMatchAdapt?: boolean | undefined;
     anchorAlignment?: "top_left" | "top_center" | "top_right" | "center_left" | "center" | "center_right" | "bottom_left" | "bottom_center" | "bottom_right" | undefined;
     noSolderMask?: boolean | undefined;
-    panelizationMethod?: "none" | "tab-routing" | undefined;
+    panelizationMethod?: "none" | "tab-routing" | "outline_routing" | undefined;
     boardGap?: number | undefined;
     col?: number | undefined;
     cellWidth?: number | undefined;
@@ -31215,7 +31220,7 @@ declare const subpanelProps: z.ZodObject<Omit<{
     schMatchAdapt?: boolean | undefined;
     anchorAlignment?: "top_left" | "top_center" | "top_right" | "center_left" | "center" | "center_right" | "bottom_left" | "bottom_center" | "bottom_right" | undefined;
     noSolderMask?: boolean | undefined;
-    panelizationMethod?: "none" | "tab-routing" | undefined;
+    panelizationMethod?: "none" | "tab-routing" | "outline_routing" | undefined;
     boardGap?: string | number | undefined;
     col?: number | undefined;
     cellWidth?: string | number | undefined;
@@ -31249,6 +31254,10 @@ interface BusProps {
     pcbTraceWidth?: number | string;
     /** PCB layers on which the bus may be routed. */
     pcbAllowedLayers?: LayerRefInput[];
+    /** Preferred PCB layer for routing the bus. */
+    preferredLayer?: LayerRefInput;
+    /** Preferred PCB layers for routing the bus, in priority order. */
+    preferredLayers?: LayerRefInput[];
 }
 declare const busProps: z.ZodObject<{
     name: z.ZodOptional<z.ZodString>;
@@ -31266,6 +31275,24 @@ declare const busProps: z.ZodObject<{
     }>]>, "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8", "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     }>, "many">>;
+    preferredLayer: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>, z.ZodObject<{
+        name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>;
+    }, "strip", z.ZodTypeAny, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
+    }, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
+    }>]>, "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8", "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
+    }>>;
+    preferredLayers: z.ZodOptional<z.ZodArray<z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>, z.ZodObject<{
+        name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>;
+    }, "strip", z.ZodTypeAny, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
+    }, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
+    }>]>, "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8", "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
+    }>, "many">>;
 }, "strip", z.ZodTypeAny, {
     connections: string[];
     name?: string | undefined;
@@ -31274,6 +31301,8 @@ declare const busProps: z.ZodObject<{
     targetImpedance?: number | undefined;
     pcbTraceWidth?: number | undefined;
     pcbAllowedLayers?: ("top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8")[] | undefined;
+    preferredLayer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
+    preferredLayers?: ("top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8")[] | undefined;
 }, {
     connections: string[];
     name?: string | undefined;
@@ -31284,6 +31313,12 @@ declare const busProps: z.ZodObject<{
     pcbAllowedLayers?: ("top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     })[] | undefined;
+    preferredLayer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
+    } | undefined;
+    preferredLayers?: ("top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
+    })[] | undefined;
 }>;
 
 interface DirectionalFanoutBoundaryPadding {

package/dist/index.js

@@ -16619,7 +16619,7 @@ var panelProps = baseGroupProps.omit({
   children: z43.any().optional(),
   anchorAlignment: ninePointAnchor.optional(),
   noSolderMask: z43.boolean().optional(),
-  panelizationMethod: z43.enum(["tab-routing", "none"]).optional(),
+  panelizationMethod: z43.enum(["tab-routing", "outline_routing", "none"]).optional(),
   boardGap: distance.optional(),
   layoutMode: z43.enum(["grid", "pack", "none"]).optional(),
   row: z43.number().optional(),
@@ -17459,7 +17459,9 @@ var busProps = z71.object({
   maxLengthSkew: distance20.pipe(z71.number().min(0).finite()).optional(),
   targetImpedance: resistance3.pipe(z71.number().positive().finite()).optional(),
   pcbTraceWidth: distance20.pipe(z71.number().positive().finite()).optional(),
-  pcbAllowedLayers: z71.array(layer_ref6).min(1).optional()
+  pcbAllowedLayers: z71.array(layer_ref6).min(1).optional(),
+  preferredLayer: layer_ref6.optional(),
+  preferredLayers: z71.array(layer_ref6).min(1).optional()
 });
 expectTypesMatch(true);