@tscircuit/props 0.0.611 → 0.0.613

package/README.md

@@ -444,6 +444,14 @@ export interface BusProps {
   connections: string[];
   /** If set, every trace in this bus is assigned to this autorouting phase. */
   routingPhaseIndex?: number | null;
+  /** Maximum routed-length difference between bus members. Raw numbers are millimeters. */
+  maxLengthSkew?: number | string;
+  /** Intended single-ended characteristic impedance. Raw numbers are ohms. */
+  targetImpedance?: number | string;
+  /** Explicit PCB trace width for every bus member. Raw numbers are millimeters. */
+  pcbTraceWidth?: number | string;
+  /** PCB layers on which the bus may be routed. */
+  pcbAllowedLayers?: LayerRefInput[];
 }
 ```
 
@@ -733,8 +741,14 @@ export interface DifferentialPairProps {
   positiveConnection: string;
   /** Name of the trace or pin carrying the negative signal. */
   negativeConnection: string;
-  /** Maximum permitted routed-length skew in millimeters. */
-  maxLengthSkew?: number;
+  /** Maximum permitted routed-length skew. Raw numbers are millimeters. */
+  maxLengthSkew?: number | string;
+  /** Intended differential characteristic impedance. Raw numbers are ohms. */
+  targetDifferentialImpedance?: number | string;
+  /** Edge-to-edge PCB copper gap between the pair. Raw numbers are millimeters. */
+  pcbTraceGap?: number | string;
+  /** Maximum length over which the pair may be routed without coupling. Raw numbers are millimeters. */
+  maxUncoupledLength?: number | string;
 }
 ```
 

package/dist/index.d.ts

@@ -28497,19 +28497,49 @@ interface BusProps {
     connections: string[];
     /** If set, every trace in this bus is assigned to this autorouting phase. */
     routingPhaseIndex?: number | null;
+    /** Maximum routed-length difference between bus members. Raw numbers are millimeters. */
+    maxLengthSkew?: number | string;
+    /** Intended single-ended characteristic impedance. Raw numbers are ohms. */
+    targetImpedance?: number | string;
+    /** Explicit PCB trace width for every bus member. Raw numbers are millimeters. */
+    pcbTraceWidth?: number | string;
+    /** PCB layers on which the bus may be routed. */
+    pcbAllowedLayers?: LayerRefInput[];
 }
 declare const busProps: z.ZodObject<{
     name: z.ZodOptional<z.ZodString>;
     connections: z.ZodArray<z.ZodString, "many">;
     routingPhaseIndex: z.ZodOptional<z.ZodNullable<z.ZodNumber>>;
+    maxLengthSkew: z.ZodOptional<z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>>;
+    targetImpedance: z.ZodOptional<z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>>;
+    pcbTraceWidth: z.ZodOptional<z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>>;
+    pcbAllowedLayers: z.ZodOptional<z.ZodArray<z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>, z.ZodObject<{
+        name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>;
+    }, "strip", z.ZodTypeAny, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
+    }, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
+    }>]>, "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8", "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
+    }>, "many">>;
 }, "strip", z.ZodTypeAny, {
     connections: string[];
     name?: string | undefined;
     routingPhaseIndex?: number | null | undefined;
+    maxLengthSkew?: number | undefined;
+    targetImpedance?: number | undefined;
+    pcbTraceWidth?: number | undefined;
+    pcbAllowedLayers?: ("top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8")[] | undefined;
 }, {
     connections: string[];
     name?: string | undefined;
     routingPhaseIndex?: number | null | undefined;
+    maxLengthSkew?: string | number | undefined;
+    targetImpedance?: string | number | undefined;
+    pcbTraceWidth?: string | number | undefined;
+    pcbAllowedLayers?: ("top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
+    })[] | undefined;
 }>;
 
 interface DirectionalFanoutBoundaryPadding {
@@ -104641,6 +104671,7 @@ declare const traceProps: z.ZodUnion<[z.ZodObject<{
     schStroke: z.ZodOptional<z.ZodString>;
     highlightColor: z.ZodOptional<z.ZodString>;
     maxLength: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    maxViaCount: z.ZodOptional<z.ZodNumber>;
     connectsTo: z.ZodOptional<z.ZodUnion<[z.ZodString, z.ZodArray<z.ZodString, "many">]>>;
 } & {
     path: z.ZodArray<z.ZodUnion<[z.ZodString, z.ZodType<{
@@ -104690,6 +104721,7 @@ declare const traceProps: z.ZodUnion<[z.ZodObject<{
     pcbStraightLine?: boolean | undefined;
     schDisplayLabel?: string | undefined;
     schStroke?: string | undefined;
+    maxViaCount?: number | undefined;
 }, {
     path: (string | {
         getPortSelector: () => string;
@@ -104742,6 +104774,7 @@ declare const traceProps: z.ZodUnion<[z.ZodObject<{
     pcbStraightLine?: boolean | undefined;
     schDisplayLabel?: string | undefined;
     schStroke?: string | undefined;
+    maxViaCount?: number | undefined;
 }>, z.ZodObject<{
     key: z.ZodOptional<z.ZodString>;
     name: z.ZodOptional<z.ZodString>;
@@ -104906,6 +104939,7 @@ declare const traceProps: z.ZodUnion<[z.ZodObject<{
     schStroke: z.ZodOptional<z.ZodString>;
     highlightColor: z.ZodOptional<z.ZodString>;
     maxLength: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    maxViaCount: z.ZodOptional<z.ZodNumber>;
     connectsTo: z.ZodOptional<z.ZodUnion<[z.ZodString, z.ZodArray<z.ZodString, "many">]>>;
 } & {
     from: z.ZodUnion<[z.ZodString, z.ZodType<{
@@ -104963,6 +104997,7 @@ declare const traceProps: z.ZodUnion<[z.ZodObject<{
     pcbStraightLine?: boolean | undefined;
     schDisplayLabel?: string | undefined;
     schStroke?: string | undefined;
+    maxViaCount?: number | undefined;
 }, {
     from: string | {
         getPortSelector: () => string;
@@ -105018,6 +105053,7 @@ declare const traceProps: z.ZodUnion<[z.ZodObject<{
     pcbStraightLine?: boolean | undefined;
     schDisplayLabel?: string | undefined;
     schStroke?: string | undefined;
+    maxViaCount?: number | undefined;
 }>, z.ZodObject<{
     key: z.ZodOptional<z.ZodString>;
     name: z.ZodOptional<z.ZodString>;
@@ -105182,6 +105218,7 @@ declare const traceProps: z.ZodUnion<[z.ZodObject<{
     schStroke: z.ZodOptional<z.ZodString>;
     highlightColor: z.ZodOptional<z.ZodString>;
     maxLength: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    maxViaCount: z.ZodOptional<z.ZodNumber>;
     connectsTo: z.ZodOptional<z.ZodUnion<[z.ZodString, z.ZodArray<z.ZodString, "many">]>>;
 } & {
     start: z.ZodUnion<[z.ZodString, z.ZodType<{
@@ -105239,6 +105276,7 @@ declare const traceProps: z.ZodUnion<[z.ZodObject<{
     pcbStraightLine?: boolean | undefined;
     schDisplayLabel?: string | undefined;
     schStroke?: string | undefined;
+    maxViaCount?: number | undefined;
 }, {
     start: string | {
         getPortSelector: () => string;
@@ -105294,6 +105332,7 @@ declare const traceProps: z.ZodUnion<[z.ZodObject<{
     pcbStraightLine?: boolean | undefined;
     schDisplayLabel?: string | undefined;
     schStroke?: string | undefined;
+    maxViaCount?: number | undefined;
 }>]>;
 type TraceProps = z.input<typeof traceProps>;
 
@@ -105307,24 +105346,39 @@ interface DifferentialPairProps {
     positiveConnection: string;
     /** Name of the trace or pin carrying the negative signal. */
     negativeConnection: string;
-    /** Maximum permitted routed-length skew in millimeters. */
-    maxLengthSkew?: number;
+    /** Maximum permitted routed-length skew. Raw numbers are millimeters. */
+    maxLengthSkew?: number | string;
+    /** Intended differential characteristic impedance. Raw numbers are ohms. */
+    targetDifferentialImpedance?: number | string;
+    /** Edge-to-edge PCB copper gap between the pair. Raw numbers are millimeters. */
+    pcbTraceGap?: number | string;
+    /** Maximum length over which the pair may be routed without coupling. Raw numbers are millimeters. */
+    maxUncoupledLength?: number | string;
 }
 declare const differentialPairProps: z.ZodObject<{
     name: z.ZodOptional<z.ZodString>;
     positiveConnection: z.ZodString;
     negativeConnection: z.ZodString;
-    maxLengthSkew: z.ZodOptional<z.ZodNumber>;
+    maxLengthSkew: z.ZodOptional<z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>>;
+    targetDifferentialImpedance: z.ZodOptional<z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>>;
+    pcbTraceGap: z.ZodOptional<z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>>;
+    maxUncoupledLength: z.ZodOptional<z.ZodPipeline<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>, z.ZodNumber>>;
 }, "strip", z.ZodTypeAny, {
     positiveConnection: string;
     negativeConnection: string;
     name?: string | undefined;
     maxLengthSkew?: number | undefined;
+    targetDifferentialImpedance?: number | undefined;
+    pcbTraceGap?: number | undefined;
+    maxUncoupledLength?: number | undefined;
 }, {
     positiveConnection: string;
     negativeConnection: string;
     name?: string | undefined;
-    maxLengthSkew?: number | undefined;
+    maxLengthSkew?: string | number | undefined;
+    targetDifferentialImpedance?: string | number | undefined;
+    pcbTraceGap?: string | number | undefined;
+    maxUncoupledLength?: string | number | undefined;
 }>;
 
 /**