@tscircuit/props 0.0.49 → 0.0.50

package/dist/index.d.ts

@@ -1,7 +1,7 @@
-import { LayoutBuilder } from '@tscircuit/layout';
 import { z } from 'zod';
 import { LayerRef, LayerRefInput } from '@tscircuit/soup';
 import { ReactElement } from 'react';
+import { LayoutBuilder } from '@tscircuit/layout';
 
 declare const direction: z.ZodEnum<["up", "down", "left", "right"]>;
 type Direction = "up" | "down" | "left" | "right";
@@ -745,24 +745,24 @@ declare const boardProps: z.ZodObject<{
     children?: any;
     width?: number | undefined;
     height?: number | undefined;
-    layout?: any;
-    routingDisabled?: boolean | undefined;
     outline?: {
         x: number;
         y: number;
     }[] | undefined;
+    layout?: any;
+    routingDisabled?: boolean | undefined;
 }, {
     pcbX?: string | number | undefined;
     pcbY?: string | number | undefined;
     children?: any;
     width?: string | number | undefined;
     height?: string | number | undefined;
-    layout?: any;
-    routingDisabled?: boolean | undefined;
     outline?: {
         x: string | number;
         y: string | number;
     }[] | undefined;
+    layout?: any;
+    routingDisabled?: boolean | undefined;
 }>;
 
 declare const chipProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.extendShape<z.objectUtil.extendShape<{
@@ -3416,6 +3416,65 @@ declare const capacitorProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.
 }>;
 declare const capacitorPins: readonly ["pin1", "left", "anode", "pos", "pin2", "right", "cathode", "neg"];
 
+interface GroupProps extends CommonLayoutProps {
+    name?: string;
+    layout?: LayoutBuilder;
+    children?: any;
+    routingDisabled?: boolean;
+}
+declare const groupProps: z.ZodObject<z.objectUtil.extendShape<{
+    pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    pcbRotation: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    schX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    schY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    schRotation: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    layer: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>, z.ZodObject<{
+        name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>;
+    }, "strip", z.ZodTypeAny, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }, {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }>]>, "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6", "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    }>>;
+    footprint: z.ZodOptional<z.ZodType<Footprint, z.ZodTypeDef, Footprint>>;
+}, {
+    name: z.ZodOptional<z.ZodString>;
+    layout: z.ZodOptional<z.ZodType<LayoutBuilder, z.ZodTypeDef, LayoutBuilder>>;
+    children: z.ZodOptional<z.ZodAny>;
+    routingDisabled: z.ZodOptional<z.ZodBoolean>;
+}>, "strip", z.ZodTypeAny, {
+    pcbX?: number | undefined;
+    pcbY?: number | undefined;
+    pcbRotation?: number | undefined;
+    schX?: number | undefined;
+    schY?: number | undefined;
+    schRotation?: number | undefined;
+    layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | undefined;
+    footprint?: Footprint | undefined;
+    name?: string | undefined;
+    children?: any;
+    layout?: LayoutBuilder | undefined;
+    routingDisabled?: boolean | undefined;
+}, {
+    pcbX?: string | number | undefined;
+    pcbY?: string | number | undefined;
+    pcbRotation?: string | number | undefined;
+    schX?: string | number | undefined;
+    schY?: string | number | undefined;
+    schRotation?: string | number | undefined;
+    layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | {
+        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
+    } | undefined;
+    footprint?: Footprint | undefined;
+    name?: string | undefined;
+    children?: any;
+    layout?: LayoutBuilder | undefined;
+    routingDisabled?: boolean | undefined;
+}>;
+type InferredGroupProps = z.input<typeof groupProps>;
+
 declare const inductorProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.extendShape<z.objectUtil.extendShape<{
     pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -5971,58 +6030,6 @@ declare const componentProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.
     symbolName?: string | undefined;
 }>;
 type ComponentProps = z.input<typeof componentProps>;
-declare const groupProps: z.ZodObject<z.objectUtil.extendShape<{
-    pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
-    pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
-    pcbRotation: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
-    schX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
-    schY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
-    schRotation: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
-    layer: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>, z.ZodObject<{
-        name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6"]>;
-    }, "strip", z.ZodTypeAny, {
-        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
-    }, {
-        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
-    }>]>, "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6", "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | {
-        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
-    }>>;
-    footprint: z.ZodOptional<z.ZodType<Footprint, z.ZodTypeDef, Footprint>>;
-}, {
-    name: z.ZodOptional<z.ZodString>;
-    layout: z.ZodOptional<z.ZodType<LayoutBuilder, z.ZodTypeDef, LayoutBuilder>>;
-    children: z.ZodOptional<z.ZodAny>;
-    routingDisabled: z.ZodOptional<z.ZodBoolean>;
-}>, "strip", z.ZodTypeAny, {
-    pcbX?: number | undefined;
-    pcbY?: number | undefined;
-    pcbRotation?: number | undefined;
-    schX?: number | undefined;
-    schY?: number | undefined;
-    schRotation?: number | undefined;
-    layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | undefined;
-    footprint?: Footprint | undefined;
-    name?: string | undefined;
-    children?: any;
-    layout?: LayoutBuilder | undefined;
-    routingDisabled?: boolean | undefined;
-}, {
-    pcbX?: string | number | undefined;
-    pcbY?: string | number | undefined;
-    pcbRotation?: string | number | undefined;
-    schX?: string | number | undefined;
-    schY?: string | number | undefined;
-    schRotation?: string | number | undefined;
-    layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | {
-        name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6";
-    } | undefined;
-    footprint?: Footprint | undefined;
-    name?: string | undefined;
-    children?: any;
-    layout?: LayoutBuilder | undefined;
-    routingDisabled?: boolean | undefined;
-}>;
-type GroupProps = z.input<typeof groupProps>;
 declare const powerSourceProps: z.ZodObject<z.objectUtil.extendShape<z.objectUtil.extendShape<z.objectUtil.extendShape<{
     pcbX: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     pcbY: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
@@ -7067,4 +7074,4 @@ declare const fabricationNotePathProps: z.ZodObject<z.objectUtil.extendShape<Omi
 }>;
 type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>;
 
-export { type BoardProps, type CapacitorProps, type ChipProps, type CommonComponentProps, type CommonLayoutProps, type ComponentProps, type ConstrainedLayoutProps, type ConstraintProps, type DiodeProps, type Direction, type DirectionAlongEdge, type FabricationNotePathProps, type FabricationNoteTextProps, type Footprint, type FootprintProps, type FootprintSoupElements, type GroupProps, type HoleProps, type InductorProps, type JumperProps, type LedProps, type NetAliasProps, type PcbTraceProps, type PinSideDefinition, type PlatedHoleProps, type PortHints, type PortProps, type PowerSourceProps, type ResistorProps, type SchematicBoxProps, type SchematicLineProps, type SchematicPathProps, type SchematicPinStyle$1 as SchematicPinStyle, type SchematicPinStyles, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicTextProps, type SilkscreenCircleProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SmtPadProps, type SupplierName, type SupplierProps, type SwitchProps, type TraceHintProps, type TraceProps, type ViaProps, boardProps, bugProps, capacitorPins, capacitorProps, chipProps, commonComponentProps, commonLayoutProps, componentProps, constrainedLayoutProps, constraintProps, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, explicitPinSideDefinition, fabricationNotePathProps, fabricationNoteTextProps, footprintProp, footprintProps, groupProps, holeProps, inductorPins, inductorProps, jumperProps, ledPins, ledProps, lrPins, lrPolarPins, netAliasProps, pcbLayoutProps, pcbTraceProps, platedHoleProps, point3, portHints, portProps, portRef, powerSourceProps, resistorPins, resistorProps, routeHintPointProps, schematicBoxProps, schematicLineProps, schematicPathProps, schematicPortArrangement, schematicTextProps, silkscreenCircleProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, supplierProps, switchProps, traceHintProps, traceProps, viaProps };
+export { type BoardProps, type CapacitorProps, type ChipProps, type CommonComponentProps, type CommonLayoutProps, type ComponentProps, type ConstrainedLayoutProps, type ConstraintProps, type DiodeProps, type Direction, type DirectionAlongEdge, type FabricationNotePathProps, type FabricationNoteTextProps, type Footprint, type FootprintProps, type FootprintSoupElements, type GroupProps, type HoleProps, type InductorProps, type InferredGroupProps, type JumperProps, type LedProps, type NetAliasProps, type PcbTraceProps, type PinSideDefinition, type PlatedHoleProps, type PortHints, type PortProps, type PowerSourceProps, type ResistorProps, type SchematicBoxProps, type SchematicLineProps, type SchematicPathProps, type SchematicPinStyle$1 as SchematicPinStyle, type SchematicPinStyles, type SchematicPortArrangement, type SchematicPortArrangementWithPinCounts, type SchematicPortArrangementWithSides, type SchematicPortArrangementWithSizes, type SchematicTextProps, type SilkscreenCircleProps, type SilkscreenLineProps, type SilkscreenPathProps, type SilkscreenRectProps, type SilkscreenTextProps, type SmtPadProps, type SupplierName, type SupplierProps, type SwitchProps, type TraceHintProps, type TraceProps, type ViaProps, boardProps, bugProps, capacitorPins, capacitorProps, chipProps, commonComponentProps, commonLayoutProps, componentProps, constrainedLayoutProps, constraintProps, diodePins, diodeProps, direction, directionAlongEdge, distanceOrMultiplier, explicitPinSideDefinition, fabricationNotePathProps, fabricationNoteTextProps, footprintProp, footprintProps, groupProps, holeProps, inductorPins, inductorProps, jumperProps, ledPins, ledProps, lrPins, lrPolarPins, netAliasProps, pcbLayoutProps, pcbTraceProps, platedHoleProps, point3, portHints, portProps, portRef, powerSourceProps, resistorPins, resistorProps, routeHintPointProps, schematicBoxProps, schematicLineProps, schematicPathProps, schematicPortArrangement, schematicTextProps, silkscreenCircleProps, silkscreenLineProps, silkscreenPathProps, silkscreenRectProps, silkscreenTextProps, smtPadProps, supplierProps, switchProps, traceHintProps, traceProps, viaProps };

package/dist/index.js

@@ -80,7 +80,7 @@ __export(lib_exports, {
 });
 module.exports = __toCommonJS(lib_exports);
 var import_soup10 = require("@tscircuit/soup");
-var import_zod15 = require("zod");
+var import_zod16 = require("zod");
 
 // lib/typecheck.ts
 var expectTypesMatch = (shouldBe) => {
@@ -321,6 +321,16 @@ var capacitorProps = commonComponentProps.extend({
 var capacitorPins = lrPolarPins;
 expectTypesMatch(true);
 
+// lib/components/group.ts
+var import_zod15 = require("zod");
+var groupProps = commonLayoutProps.extend({
+  name: import_zod15.z.string().optional(),
+  layout: import_zod15.z.custom((v) => true).optional(),
+  children: import_zod15.z.any().optional(),
+  routingDisabled: import_zod15.z.boolean().optional()
+});
+expectTypesMatch(true);
+
 // lib/index.ts
 var inductorProps = commonComponentProps.extend({
   inductance: import_soup10.inductance
@@ -329,15 +339,15 @@ var inductorPins = lrPins;
 var diodeProps = commonComponentProps.extend({});
 var diodePins = lrPolarPins;
 var ledProps = commonComponentProps.extend({
-  color: import_zod15.z.string().optional()
+  color: import_zod16.z.string().optional()
 });
 var ledPins = lrPolarPins;
 var switchProps = commonComponentProps.extend({
-  ftype: import_zod15.z.literal("switch"),
-  switchType: import_zod15.z.enum(["spst"]).default("spst"),
-  isNormallyClosed: import_zod15.z.boolean().default(false)
+  ftype: import_zod16.z.literal("switch"),
+  switchType: import_zod16.z.enum(["spst"]).default("spst"),
+  isNormallyClosed: import_zod16.z.boolean().default(false)
 });
-var distanceOrMultiplier2 = import_soup10.distance.or(import_zod15.z.enum(["2x", "3x", "4x"]));
+var distanceOrMultiplier2 = import_soup10.distance.or(import_zod16.z.enum(["2x", "3x", "4x"]));
 var viaProps = commonLayoutProps.extend({
   fromLayer: import_soup10.layer_ref,
   toLayer: import_soup10.layer_ref,
@@ -345,50 +355,50 @@ var viaProps = commonLayoutProps.extend({
   outerDiameter: import_soup10.distance
 });
 var netAliasProps = commonLayoutProps.extend({
-  net: import_zod15.z.string().optional()
+  net: import_zod16.z.string().optional()
 });
-var portRef = import_zod15.z.union([
-  import_zod15.z.string(),
-  import_zod15.z.custom(
+var portRef = import_zod16.z.union([
+  import_zod16.z.string(),
+  import_zod16.z.custom(
     (v) => Boolean(v.getPortSelector)
   )
 ]);
-var traceProps = import_zod15.z.object({
-  path: import_zod15.z.array(portRef),
+var traceProps = import_zod16.z.object({
+  path: import_zod16.z.array(portRef),
   thickness: import_soup10.distance.optional(),
-  schematicRouteHints: import_zod15.z.array(import_soup10.point).optional(),
-  pcbRouteHints: import_zod15.z.array(import_soup10.route_hint_point).optional()
+  schematicRouteHints: import_zod16.z.array(import_soup10.point).optional(),
+  pcbRouteHints: import_zod16.z.array(import_soup10.route_hint_point).optional()
 }).or(
-  import_zod15.z.object({
+  import_zod16.z.object({
     from: portRef,
     to: portRef,
     thickness: import_soup10.distance.optional(),
-    schematicRouteHints: import_zod15.z.array(import_soup10.point).optional(),
-    pcbRouteHints: import_zod15.z.array(import_soup10.route_hint_point).optional()
+    schematicRouteHints: import_zod16.z.array(import_soup10.point).optional(),
+    pcbRouteHints: import_zod16.z.array(import_soup10.route_hint_point).optional()
   })
 );
-var smtPadProps = import_zod15.z.union([
+var smtPadProps = import_zod16.z.union([
   pcbLayoutProps.omit({ pcbRotation: true }).extend({
-    shape: import_zod15.z.literal("circle"),
+    shape: import_zod16.z.literal("circle"),
     radius: import_soup10.distance.optional(),
     portHints: portHints.optional()
   }),
   pcbLayoutProps.omit({ pcbRotation: true }).extend({
-    shape: import_zod15.z.literal("rect"),
+    shape: import_zod16.z.literal("rect"),
     width: import_soup10.distance.optional(),
     height: import_soup10.distance.optional(),
     portHints: portHints.optional()
   })
 ]);
-var platedHoleProps = import_zod15.z.union([
+var platedHoleProps = import_zod16.z.union([
   pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
-    shape: import_zod15.z.literal("circle"),
+    shape: import_zod16.z.literal("circle"),
     holeDiameter: import_soup10.distance,
     outerDiameter: import_soup10.distance,
     portHints: portHints.optional()
   }),
   pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({
-    shape: import_zod15.z.literal("oval"),
+    shape: import_zod16.z.literal("oval"),
     outerWidth: import_soup10.distance,
     outerHeight: import_soup10.distance,
     innerWidth: import_soup10.distance,
@@ -399,68 +409,62 @@ var platedHoleProps = import_zod15.z.union([
 var holeProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
   holeDiameter: import_soup10.distance
 });
-var schematicBoxProps = import_zod15.z.object({
+var schematicBoxProps = import_zod16.z.object({
   schX: import_soup10.distance,
   schY: import_soup10.distance,
   width: import_soup10.distance,
   height: import_soup10.distance
 });
-var schematicTextProps = import_zod15.z.object({
+var schematicTextProps = import_zod16.z.object({
   schX: import_soup10.distance,
   schY: import_soup10.distance,
-  text: import_zod15.z.string()
+  text: import_zod16.z.string()
 });
-var schematicLineProps = import_zod15.z.object({
+var schematicLineProps = import_zod16.z.object({
   x1: import_soup10.distance,
   y1: import_soup10.distance,
   x2: import_soup10.distance,
   y2: import_soup10.distance
 });
-var schematicPathProps = import_zod15.z.object({
-  points: import_zod15.z.array(import_soup10.point),
-  isFilled: import_zod15.z.boolean().optional().default(false),
-  fillColor: import_zod15.z.enum(["red", "blue"]).optional()
+var schematicPathProps = import_zod16.z.object({
+  points: import_zod16.z.array(import_soup10.point),
+  isFilled: import_zod16.z.boolean().optional().default(false),
+  fillColor: import_zod16.z.enum(["red", "blue"]).optional()
 });
-var constraintProps = import_zod15.z.union([
-  import_zod15.z.object({
-    type: import_zod15.z.literal("xdist"),
+var constraintProps = import_zod16.z.union([
+  import_zod16.z.object({
+    type: import_zod16.z.literal("xdist"),
     dist: import_soup10.distance,
-    left: import_zod15.z.string(),
-    right: import_zod15.z.string()
+    left: import_zod16.z.string(),
+    right: import_zod16.z.string()
   }),
-  import_zod15.z.object({
-    type: import_zod15.z.literal("ydist"),
+  import_zod16.z.object({
+    type: import_zod16.z.literal("ydist"),
     dist: import_soup10.distance,
-    top: import_zod15.z.string(),
-    bottom: import_zod15.z.string()
+    top: import_zod16.z.string(),
+    bottom: import_zod16.z.string()
   })
 ]);
-var constrainedLayoutProps = import_zod15.z.object({});
-var footprintProps = import_zod15.z.object({});
+var constrainedLayoutProps = import_zod16.z.object({});
+var footprintProps = import_zod16.z.object({});
 var componentProps = commonComponentProps;
-var groupProps = commonLayoutProps.extend({
-  name: import_zod15.z.string().optional(),
-  layout: import_zod15.z.custom((v) => true).optional(),
-  children: import_zod15.z.any().optional(),
-  routingDisabled: import_zod15.z.boolean().optional()
-});
 var powerSourceProps = commonComponentProps.extend({
   voltage: import_soup10.voltage
 });
 var portProps = commonLayoutProps.extend({
-  name: import_zod15.z.string(),
-  pinNumber: import_zod15.z.number().optional(),
-  aliases: import_zod15.z.array(import_zod15.z.string()).optional(),
+  name: import_zod16.z.string(),
+  pinNumber: import_zod16.z.number().optional(),
+  aliases: import_zod16.z.array(import_zod16.z.string()).optional(),
   direction
 });
 var silkscreenTextProps = pcbLayoutProps.extend({
-  text: import_zod15.z.string(),
-  anchorAlignment: import_zod15.z.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  font: import_zod15.z.enum(["tscircuit2024"]).optional(),
+  text: import_zod16.z.string(),
+  anchorAlignment: import_zod16.z.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  font: import_zod16.z.enum(["tscircuit2024"]).optional(),
   fontSize: import_soup10.length.optional()
 });
 var silkscreenPathProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotation: true }).extend({
-  route: import_zod15.z.array(import_soup10.route_hint_point),
+  route: import_zod16.z.array(import_soup10.route_hint_point),
   strokeWidth: import_soup10.length.optional()
 });
 var silkscreenLineProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotation: true }).extend({
@@ -471,46 +475,46 @@ var silkscreenLineProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotat
   y2: import_soup10.distance
 });
 var silkscreenRectProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  isFilled: import_zod15.z.boolean().optional(),
-  isOutline: import_zod15.z.boolean().optional(),
+  isFilled: import_zod16.z.boolean().optional(),
+  isOutline: import_zod16.z.boolean().optional(),
   strokeWidth: import_soup10.distance.optional(),
   width: import_soup10.distance,
   height: import_soup10.distance
 });
 var silkscreenCircleProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({
-  isFilled: import_zod15.z.boolean().optional(),
-  isOutline: import_zod15.z.boolean().optional(),
+  isFilled: import_zod16.z.boolean().optional(),
+  isOutline: import_zod16.z.boolean().optional(),
   strokeWidth: import_soup10.distance.optional(),
   radius: import_soup10.distance
 });
-var routeHintPointProps = import_zod15.z.object({
+var routeHintPointProps = import_zod16.z.object({
   x: import_soup10.distance,
   y: import_soup10.distance,
-  via: import_zod15.z.boolean().optional(),
+  via: import_zod16.z.boolean().optional(),
   toLayer: import_soup10.layer_ref.optional()
 });
-var traceHintProps = import_zod15.z.object({
-  for: import_zod15.z.string().optional().describe(
+var traceHintProps = import_zod16.z.object({
+  for: import_zod16.z.string().optional().describe(
     "Selector for the port you're targeting, not required if you're inside a trace"
   ),
-  order: import_zod15.z.number().optional(),
+  order: import_zod16.z.number().optional(),
   offset: import_soup10.route_hint_point.or(routeHintPointProps).optional(),
-  offsets: import_zod15.z.array(import_soup10.route_hint_point).or(import_zod15.z.array(routeHintPointProps)).optional(),
-  traceWidth: import_zod15.z.number().optional()
+  offsets: import_zod16.z.array(import_soup10.route_hint_point).or(import_zod16.z.array(routeHintPointProps)).optional(),
+  traceWidth: import_zod16.z.number().optional()
 });
-var pcbTraceProps = import_zod15.z.object({
-  layer: import_zod15.z.string().optional(),
+var pcbTraceProps = import_zod16.z.object({
+  layer: import_zod16.z.string().optional(),
   thickness: import_soup10.distance.optional(),
-  route: import_zod15.z.array(import_soup10.route_hint_point)
+  route: import_zod16.z.array(import_soup10.route_hint_point)
 });
 var fabricationNoteTextProps = pcbLayoutProps.extend({
-  text: import_zod15.z.string(),
-  anchorAlignment: import_zod15.z.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  font: import_zod15.z.enum(["tscircuit2024"]).optional(),
+  text: import_zod16.z.string(),
+  anchorAlignment: import_zod16.z.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  font: import_zod16.z.enum(["tscircuit2024"]).optional(),
   fontSize: import_soup10.length.optional()
 });
 var fabricationNotePathProps = pcbLayoutProps.omit({ pcbX: true, pcbY: true, pcbRotation: true }).extend({
-  route: import_zod15.z.array(import_soup10.route_hint_point),
+  route: import_zod16.z.array(import_soup10.route_hint_point),
   strokeWidth: import_soup10.length.optional()
 });
 // Annotate the CommonJS export names for ESM import in node:

package/dist/index.js.map

@@ -1 +1 @@
-{"version":3,"sources":["../lib/index.ts","../lib/typecheck.ts","../lib/common/direction.ts","../lib/common/portHints.ts","../lib/common/layout.ts","../lib/common/point3.ts","../lib/common/cadModel.ts","../lib/common/footprintProp.ts","../lib/common/schematicPinDefinitions.ts","../lib/components/board.ts","../lib/common/point.ts","../lib/components/chip.ts","../lib/common/schematicPinStyle.ts","../lib/components/jumper.ts","../lib/components/resistor.ts","../lib/components/capacitor.ts"],"sourcesContent":["/**\n * THINKING ABOUT ADDING SOMETHING TO THIS FILE?\n *\n * THINK AGAIN!\n *\n * This file is TOO BIG! Create files using the pattern in the surrounding\n * directories, then export from this file.\n */\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport {\n  type AnySoupElementInput,\n  capacitance,\n  distance,\n  inductance,\n  layer_ref,\n  length,\n  type PCBPlatedHoleInput,\n  type PCBSMTPadInput,\n  point,\n  resistance,\n  rotation,\n  route_hint_point,\n  supplier_name,\n  voltage,\n} from \"@tscircuit/soup\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\nimport { direction } from \"./common/direction\"\nimport { portHints } from \"./common/portHints\"\nimport {\n  commonComponentProps,\n  commonLayoutProps,\n  lrPins,\n  lrPolarPins,\n  pcbLayoutProps,\n} from \"./common/layout\"\nimport { explicitPinSideDefinition } from \"./common/schematicPinDefinitions\"\n\nexport * from \"./common/direction\"\nexport * from \"./common/portHints\"\nexport * from \"./common/layout\"\nexport * from \"./common/point3\"\nexport * from \"./common/portHints\"\nexport * from \"./common/footprintProp\"\nexport * from \"./common/schematicPinDefinitions\"\n\nexport * from \"./components/board\"\nexport * from \"./components/chip\"\nexport * from \"./components/jumper\"\n\nexport * from \"./components/resistor\"\nexport * from \"./components/capacitor\"\n\nexport const inductorProps = commonComponentProps.extend({\n  inductance,\n})\nexport const inductorPins = lrPins\nexport type InductorProps = z.input<typeof inductorProps>\n\nexport const diodeProps = commonComponentProps.extend({})\nexport const diodePins = lrPolarPins\nexport type DiodeProps = z.input<typeof diodeProps>\n\nexport const ledProps = commonComponentProps.extend({\n  color: z.string().optional(),\n})\nexport const ledPins = lrPolarPins\nexport type LedProps = z.input<typeof ledProps>\n\nexport const switchProps = commonComponentProps.extend({\n  ftype: z.literal(\"switch\"),\n  switchType: z.enum([\"spst\"]).default(\"spst\"),\n  isNormallyClosed: z.boolean().default(false),\n})\nexport type SwitchProps = z.input<typeof switchProps>\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n\nexport const viaProps = commonLayoutProps.extend({\n  fromLayer: layer_ref,\n  toLayer: layer_ref,\n  holeDiameter: distance,\n  outerDiameter: distance,\n})\nexport type ViaProps = z.input<typeof viaProps>\n\nexport const netAliasProps = commonLayoutProps.extend({\n  net: z.string().optional(),\n})\nexport type NetAliasProps = z.input<typeof netAliasProps>\n\nexport const portRef = z.union([\n  z.string(),\n  z.custom<{ getPortSelector: () => string }>((v) =>\n    Boolean(v.getPortSelector),\n  ),\n])\n\nexport const traceProps = z\n  .object({\n    path: z.array(portRef),\n    thickness: distance.optional(),\n    schematicRouteHints: z.array(point).optional(),\n    pcbRouteHints: z.array(route_hint_point).optional(),\n  })\n  .or(\n    z.object({\n      from: portRef,\n      to: portRef,\n      thickness: distance.optional(),\n      schematicRouteHints: z.array(point).optional(),\n      pcbRouteHints: z.array(route_hint_point).optional(),\n    }),\n  )\nexport type TraceProps = z.input<typeof traceProps>\n\nexport const smtPadProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"circle\"),\n    radius: distance.optional(),\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"rect\"),\n    width: distance.optional(),\n    height: distance.optional(),\n    portHints: portHints.optional(),\n  }),\n])\nexport type SmtPadProps = z.input<typeof smtPadProps>\n\nexport const platedHoleProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    shape: z.literal(\"circle\"),\n    holeDiameter: distance,\n    outerDiameter: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    shape: z.literal(\"oval\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n])\nexport type PlatedHoleProps = z.input<typeof platedHoleProps>\n\nexport const holeProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({\n  holeDiameter: distance,\n})\nexport type HoleProps = z.input<typeof holeProps>\n\nexport const schematicBoxProps = z.object({\n  schX: distance,\n  schY: distance,\n  width: distance,\n  height: distance,\n})\nexport type SchematicBoxProps = z.input<typeof schematicBoxProps>\n\nexport const schematicTextProps = z.object({\n  schX: distance,\n  schY: distance,\n  text: z.string(),\n})\nexport type SchematicTextProps = z.input<typeof schematicTextProps>\n\nexport const schematicLineProps = z.object({\n  x1: distance,\n  y1: distance,\n  x2: distance,\n  y2: distance,\n})\nexport type SchematicLineProps = z.input<typeof schematicLineProps>\n\nexport const schematicPathProps = z.object({\n  points: z.array(point),\n  isFilled: z.boolean().optional().default(false),\n  fillColor: z.enum([\"red\", \"blue\"]).optional(),\n})\nexport type SchematicPathProps = z.input<typeof schematicPathProps>\n\nexport const constraintProps = z.union([\n  z.object({\n    type: z.literal(\"xdist\"),\n    dist: distance,\n    left: z.string(),\n    right: z.string(),\n  }),\n  z.object({\n    type: z.literal(\"ydist\"),\n    dist: distance,\n    top: z.string(),\n    bottom: z.string(),\n  }),\n])\nexport type ConstraintProps = z.input<typeof constraintProps>\n\nexport const constrainedLayoutProps = z.object({})\nexport type ConstrainedLayoutProps = z.input<typeof constrainedLayoutProps>\n\nexport const footprintProps = z.object({})\nexport type FootprintProps = z.input<typeof footprintProps>\n\nexport const componentProps = commonComponentProps\nexport type ComponentProps = z.input<typeof componentProps>\n\nexport const groupProps = commonLayoutProps.extend({\n  name: z.string().optional(),\n  layout: z.custom<LayoutBuilder>((v) => true).optional(),\n  children: z.any().optional(),\n  routingDisabled: z.boolean().optional(),\n})\nexport type GroupProps = z.input<typeof groupProps>\n\nexport const powerSourceProps = commonComponentProps.extend({\n  voltage,\n})\nexport type PowerSourceProps = z.input<typeof powerSourceProps>\n\nexport const portProps = commonLayoutProps.extend({\n  name: z.string(),\n  pinNumber: z.number().optional(),\n  aliases: z.array(z.string()).optional(),\n  direction: direction,\n})\nexport type PortProps = z.input<typeof portProps>\n\nexport const silkscreenTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type SilkscreenTextProps = z.input<typeof silkscreenTextProps>\n\nexport const silkscreenPathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type SilkscreenPathProps = z.input<typeof silkscreenPathProps>\n\nexport const silkscreenLineProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    strokeWidth: distance,\n    x1: distance,\n    y1: distance,\n    x2: distance,\n    y2: distance,\n  })\nexport type SilkscreenLineProps = z.input<typeof silkscreenLineProps>\n\nexport const silkscreenRectProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    width: distance,\n    height: distance,\n  })\nexport type SilkscreenRectProps = z.input<typeof silkscreenRectProps>\n\nexport const silkscreenCircleProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    radius: distance,\n  })\nexport type SilkscreenCircleProps = z.input<typeof silkscreenCircleProps>\n\nexport const routeHintPointProps = z.object({\n  x: distance,\n  y: distance,\n  via: z.boolean().optional(),\n  toLayer: layer_ref.optional(),\n})\n\nexport const traceHintProps = z.object({\n  for: z\n    .string()\n    .optional()\n    .describe(\n      \"Selector for the port you're targeting, not required if you're inside a trace\",\n    ),\n  order: z.number().optional(),\n  offset: route_hint_point.or(routeHintPointProps).optional(),\n  offsets: z\n    .array(route_hint_point)\n    .or(z.array(routeHintPointProps))\n    .optional(),\n  traceWidth: z.number().optional(),\n})\n\nexport type TraceHintProps = z.input<typeof traceHintProps>\n\nexport const pcbTraceProps = z.object({\n  layer: z.string().optional(),\n  thickness: distance.optional(),\n  route: z.array(route_hint_point),\n})\nexport type PcbTraceProps = z.input<typeof pcbTraceProps>\n\nexport const fabricationNoteTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type FabricationNoteTextProps = z.input<typeof fabricationNoteTextProps>\n\nexport const fabricationNotePathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>\n","import type { TypeEqual } from \"ts-expect\"\n\nexport const expectTypesMatch = <const T1, const T2>(\n  shouldBe: TypeEqual<T1, T2>,\n): void => {}\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nexport const direction = z.enum([\"up\", \"down\", \"left\", \"right\"])\nexport type Direction = \"up\" | \"down\" | \"left\" | \"right\"\n\nexport type DirectionAlongEdge =\n  | \"top-to-bottom\"\n  | \"left-to-right\"\n  | \"bottom-to-top\"\n  | \"right-to-left\"\n\nexport const directionAlongEdge = z.enum([\n  \"top-to-bottom\",\n  \"left-to-right\",\n  \"bottom-to-top\",\n  \"right-to-left\",\n])\n\nexpectTypesMatch<Direction, z.infer<typeof direction>>(true)\nexpectTypesMatch<DirectionAlongEdge, z.infer<typeof directionAlongEdge>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const portHints = z.array(z.string().or(z.number()))\nexport type PortHints = (string | number)[]\n\nexpectTypesMatch<PortHints, z.infer<typeof portHints>>(true)\n","import { z } from \"zod\"\nimport {\n  type AnySoupElementInput,\n  distance,\n  layer_ref,\n  type LayerRef,\n  type LayerRefInput,\n  rotation,\n  supplier_name,\n} from \"@tscircuit/soup\"\nimport { point3 } from \"./point3\"\nimport {\n  cadModelJscad,\n  cadModelObj,\n  cadModelProp,\n  cadModelStl,\n  type CadModelJscad,\n  type CadModelObj,\n  type CadModelProp,\n  type CadModelStl,\n} from \"./cadModel\"\nimport { footprintProp, type Footprint } from \"./footprintProp\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const pcbLayoutProps = z.object({\n  pcbX: distance,\n  pcbY: distance,\n  pcbRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n})\n\nexport interface CommonLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n\n  schX?: string | number\n  schY?: string | number\n  schRotation?: string | number\n\n  layer?: LayerRefInput\n  footprint?: Footprint\n}\n\nexport const commonLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n  footprint: footprintProp.optional(),\n})\n\ntype InferredCommonLayoutProps = z.input<typeof commonLayoutProps>\nexpectTypesMatch<CommonLayoutProps, InferredCommonLayoutProps>(true)\n\nexport type SupplierName =\n  | \"jlcpcb\"\n  | \"macrofab\"\n  | \"pcbway\"\n  | \"digikey\"\n  | \"mouser\"\n  | \"lcsc\"\nexport interface SupplierProps {\n  supplierPartNumbers?: { [k in SupplierName]?: string[] }\n}\nexport const supplierProps = z.object({\n  supplierPartNumbers: z.record(supplier_name, z.array(z.string())).optional(),\n})\n\nexpectTypesMatch<SupplierProps, z.input<typeof supplierProps>>(true)\n\nexport interface CommonComponentProps extends CommonLayoutProps {\n  name: string\n  supplierPartNumbers?: SupplierProps[\"supplierPartNumbers\"]\n  cadModel?: CadModelProp\n  children?: any\n  symbolName?: string\n}\n\nexport const commonComponentProps = commonLayoutProps\n  .merge(supplierProps)\n  .extend({\n    name: z.string(),\n    cadModel: cadModelProp.optional(),\n    children: z.any().optional(),\n    symbolName: z.string().optional(),\n  })\n\ntype InferredCommonComponentProps = z.input<typeof commonComponentProps>\nexpectTypesMatch<CommonComponentProps, InferredCommonComponentProps>(true)\n\nexport const lrPins = [\"pin1\", \"left\", \"pin2\", \"right\"] as const\nexport const lrPolarPins = [\n  \"pin1\",\n  \"left\",\n  \"anode\",\n  \"pos\",\n  \"pin2\",\n  \"right\",\n  \"cathode\",\n  \"neg\",\n] as const\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n","import { distance } from \"@tscircuit/soup\"\nimport { z } from \"zod\"\n\nexport const point3 = z.object({\n  x: distance,\n  y: distance,\n  z: distance,\n})\n","import { z } from \"zod\"\nimport { point3 } from \"./point3\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const rotationPoint3 = z.object({\n  x: z.union([z.number(), z.string()]),\n  y: z.union([z.number(), z.string()]),\n  z: z.union([z.number(), z.string()]),\n})\n\nexport interface CadModelBase {\n  rotationOffset?:\n    | number\n    | { x: number | string; y: number | string; z: number | string }\n  positionOffset?: {\n    x: number | string\n    y: number | string\n    z: number | string\n  }\n  size?: { x: number | string; y: number | string; z: number | string }\n}\n\nexport const cadModelBase = z.object({\n  rotationOffset: z.number().or(rotationPoint3).optional(),\n  positionOffset: point3.optional(),\n  size: point3.optional(),\n})\n\nexpectTypesMatch<CadModelBase, z.input<typeof cadModelBase>>(true)\n\nexport interface CadModelStl extends CadModelBase {\n  stlUrl: string\n}\nexport const cadModelStl = cadModelBase.extend({\n  stlUrl: z.string(),\n})\n\nexport interface CadModelObj extends CadModelBase {\n  objUrl: string\n  mtlUrl?: string\n}\nexport const cadModelObj = cadModelBase.extend({\n  objUrl: z.string(),\n  mtlUrl: z.string().optional(),\n})\n\nexport interface CadModelJscad extends CadModelBase {\n  jscad: Record<string, any>\n}\nexport const cadModelJscad = cadModelBase.extend({\n  jscad: z.record(z.any()),\n})\n\nexport type CadModelProp = string | CadModelStl | CadModelObj | CadModelJscad\n\nexport const cadModelProp = z.union([\n  z.string(),\n  cadModelStl,\n  cadModelObj,\n  cadModelJscad,\n])\n\ntype InferredCadModelProp = z.input<typeof cadModelProp>\nexpectTypesMatch<CadModelProp, InferredCadModelProp>(true)\n","import type { LayerRef } from \"@tscircuit/soup\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\n\n/**\n * This is an abbreviated definition of the soup elements that you can find here:\n * https://docs.tscircuit.com/api-reference/advanced/soup#pcb-smtpad\n */\nexport type FootprintSoupElements = {\n  type: \"pcb_smtpad\" | \"pcb_plated_hole\"\n  x: string | number\n  y: string | number\n  layer?: LayerRef\n  holeDiameter?: string | number\n  outerDiameter?: string | number\n  shape?: \"circle\" | \"rect\"\n  width?: string | number\n  height?: string | number\n  portHints?: string[]\n}\n\nexport type Footprint = string | ReactElement | FootprintSoupElements[]\nexport const footprintProp = z.custom<Footprint>((v) => true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\n/**\n * @deprecated Use SchematicPortArrangementWithPinCounts instead.\n */\nexport interface SchematicPortArrangementWithSizes {\n  leftSize?: number\n  topSize?: number\n  rightSize?: number\n  bottomSize?: number\n}\n\n/**\n * Specifies the number of pins on each side of the schematic box component.\n */\nexport interface SchematicPortArrangementWithPinCounts {\n  leftPinCount?: number\n  topPinCount?: number\n  rightPinCount?: number\n  bottomPinCount?: number\n}\n\nexport interface PinSideDefinition {\n  pins: number[]\n  direction:\n    | \"top-to-bottom\"\n    | \"left-to-right\"\n    | \"bottom-to-top\"\n    | \"right-to-left\"\n}\n\nexport interface SchematicPortArrangementWithSides {\n  leftSide?: PinSideDefinition\n  topSide?: PinSideDefinition\n  rightSide?: PinSideDefinition\n  bottomSide?: PinSideDefinition\n}\n\nexport type SchematicPortArrangement =\n  | SchematicPortArrangementWithSizes\n  | SchematicPortArrangementWithSides\n  | SchematicPortArrangementWithPinCounts\n\nexport const explicitPinSideDefinition = z.object({\n  pins: z.array(z.number()),\n  direction: z.union([\n    z.literal(\"top-to-bottom\"),\n    z.literal(\"left-to-right\"),\n    z.literal(\"bottom-to-top\"),\n    z.literal(\"right-to-left\"),\n  ]),\n})\n\nexport const schematicPortArrangement = z\n  .object({\n    leftSize: z.number().optional().describe(\"@deprecated, use leftPinCount\"),\n    topSize: z.number().optional().describe(\"@deprecated, use topPinCount\"),\n    rightSize: z.number().optional().describe(\"@deprecated, use rightPinCount\"),\n    bottomSize: z\n      .number()\n      .optional()\n      .describe(\"@deprecated, use bottomPinCount\"),\n  })\n  .or(\n    z.object({\n      leftPinCount: z.number().optional(),\n      rightPinCount: z.number().optional(),\n      topPinCount: z.number().optional(),\n      bottomPinCount: z.number().optional(),\n    }),\n  )\n  .or(\n    z.object({\n      leftSide: explicitPinSideDefinition.optional(),\n      rightSide: explicitPinSideDefinition.optional(),\n      topSide: explicitPinSideDefinition.optional(),\n      bottomSide: explicitPinSideDefinition.optional(),\n    }),\n  )\n\nexpectTypesMatch<\n  SchematicPortArrangement,\n  z.input<typeof schematicPortArrangement>\n>(true)\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { point, type Point } from \"lib/common/point\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface BoardProps {\n  width?: number | string\n  height?: number | string\n  outline?: Point[]\n  pcbX?: number | string\n  pcbY?: number | string\n  layout?: any\n  routingDisabled?: boolean\n  children?: any\n}\n\nexport const boardProps = z.object({\n  width: distance.optional(),\n  height: distance.optional(),\n  outline: z.array(point).optional(),\n  pcbX: distance.optional().default(0),\n  pcbY: distance.optional().default(0),\n  layout: z.any().optional(),\n  routingDisabled: z.boolean().optional(),\n  children: z.any(),\n})\n\nexpectTypesMatch<BoardProps, z.input<typeof boardProps>>(true)\n","import { distance } from \"@tscircuit/soup\"\nimport { z } from \"zod\"\n\nexport const point = z.object({\n  x: distance,\n  y: distance,\n})\n\nexport type Point = { x: number | string; y: number | string }\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { commonComponentProps } from \"lib/common/layout\"\nimport { schematicPortArrangement } from \"lib/common/schematicPinDefinitions\"\nimport { schematicPinStyle } from \"lib/common/schematicPinStyle\"\n\nexport const chipProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z.record(z.number().or(z.string()), z.string()).optional(),\n\n  schPortArrangement: schematicPortArrangement.optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n})\n\nexport type SchematicPinStyle = {\n  leftMargin?: number | string\n  rightMargin?: number | string\n  topMargin?: number | string\n  bottomMargin?: number | string\n}\nexport type SchematicPinStyles = Record<string, SchematicPinStyle>\n\n/**\n * @deprecated Use ChipProps instead.\n */\nexport const bugProps = chipProps\nexport type ChipProps = z.input<typeof chipProps>\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type SchematicPinStyle = Record<\n  string,\n  {\n    leftMargin?: number | string\n    rightMargin?: number | string\n    topMargin?: number | string\n    bottomMargin?: number | string\n  }\n>\n\nexport const schematicPinStyle = z.record(\n  z.object({\n    leftMargin: distance.optional(),\n    rightMargin: distance.optional(),\n    topMargin: distance.optional(),\n    bottomMargin: distance.optional(),\n  }),\n)\n\nexpectTypesMatch<SchematicPinStyle, z.input<typeof schematicPinStyle>>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  schematicPinStyle,\n  type SchematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { distance } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport {\n  schematicPortArrangement,\n  type SchematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\n\nexport interface JumperProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string>\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: number | string\n  schWidth?: number | string\n  schHeight?: number | string\n  schDirection?: \"left\" | \"right\"\n  schPortArrangement?: SchematicPortArrangement\n}\n\nexport const jumperProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z.record(z.number().or(z.string()), z.string()).optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  schDirection: z.enum([\"left\", \"right\"]).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n})\n\ntype InferredJumperProps = z.input<typeof jumperProps>\nexpectTypesMatch<JumperProps, InferredJumperProps>(true)\n","import { z } from \"zod\"\nimport { resistance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  lrPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface ResistorProps extends CommonComponentProps {\n  resistance: number | string\n  pullupFor?: string\n  pullupTo?: string\n  pulldownFor?: string\n  pulldownTo?: string\n}\n\nexport const resistorProps = commonComponentProps.extend({\n  resistance,\n\n  pullupFor: z.string().optional(),\n  pullupTo: z.string().optional(),\n\n  pulldownFor: z.string().optional(),\n  pulldownTo: z.string().optional(),\n})\nexport const resistorPins = lrPins\n\ntype InferredResistorProps = z.input<typeof resistorProps>\nexpectTypesMatch<ResistorProps, InferredResistorProps>(true)\n","import { z } from \"zod\"\nimport { capacitance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface CapacitorProps extends CommonComponentProps {\n  capacitance: number | string\n\n  decouplingFor?: string\n  decouplingTo?: string\n\n  bypassFor?: string\n  bypassTo?: string\n}\n\nexport const capacitorProps = commonComponentProps.extend({\n  capacitance,\n\n  decouplingFor: z.string().optional(),\n  decouplingTo: z.string().optional(),\n\n  bypassFor: z.string().optional(),\n  bypassTo: z.string().optional(),\n})\nexport const capacitorPins = lrPolarPins\n\nexpectTypesMatch<CapacitorProps, z.input<typeof capacitorProps>>(true)\n"],"mappings":";;;;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,8BAAAA;AAAA,EAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AASA,IAAAC,gBAeO;AAEP,IAAAC,eAAkB;;;ACxBX,IAAM,mBAAmB,CAC9B,aACS;AAAC;;;ACHZ,iBAAkB;AACX,IAAM,YAAY,aAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC;AASxD,IAAM,qBAAqB,aAAE,KAAK;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAuD,IAAI;AAC3D,iBAAyE,IAAI;;;ACnB7E,IAAAC,cAAkB;AAGX,IAAM,YAAY,cAAE,MAAM,cAAE,OAAO,EAAE,GAAG,cAAE,OAAO,CAAC,CAAC;AAG1D,iBAAuD,IAAI;;;ACN3D,IAAAC,cAAkB;AAClB,IAAAC,eAQO;;;ACTP,kBAAyB;AACzB,IAAAC,cAAkB;AAEX,IAAM,SAAS,cAAE,OAAO;AAAA,EAC7B,GAAG;AAAA,EACH,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ACPD,IAAAC,cAAkB;AAIX,IAAM,iBAAiB,cAAE,OAAO;AAAA,EACrC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AACrC,CAAC;AAcM,IAAM,eAAe,cAAE,OAAO;AAAA,EACnC,gBAAgB,cAAE,OAAO,EAAE,GAAG,cAAc,EAAE,SAAS;AAAA,EACvD,gBAAgB,OAAO,SAAS;AAAA,EAChC,MAAM,OAAO,SAAS;AACxB,CAAC;AAED,iBAA6D,IAAI;AAK1D,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQ,cAAE,OAAO;AACnB,CAAC;AAMM,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQ,cAAE,OAAO;AAAA,EACjB,QAAQ,cAAE,OAAO,EAAE,SAAS;AAC9B,CAAC;AAKM,IAAM,gBAAgB,aAAa,OAAO;AAAA,EAC/C,OAAO,cAAE,OAAO,cAAE,IAAI,CAAC;AACzB,CAAC;AAIM,IAAM,eAAe,cAAE,MAAM;AAAA,EAClC,cAAE,OAAO;AAAA,EACT;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAqD,IAAI;;;AC7DzD,IAAAC,cAAkB;AAoBX,IAAM,gBAAgB,cAAE,OAAkB,CAAC,MAAM,IAAI;;;AHErD,IAAM,iBAAiB,cAAE,OAAO;AAAA,EACrC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,aAAa,sBAAS,SAAS;AAAA,EAC/B,OAAO,uBAAU,SAAS;AAC5B,CAAC;AAeM,IAAM,oBAAoB,cAAE,OAAO;AAAA,EACxC,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,OAAO,uBAAU,SAAS;AAAA,EAC1B,WAAW,cAAc,SAAS;AACpC,CAAC;AAGD,iBAA+D,IAAI;AAY5D,IAAM,gBAAgB,cAAE,OAAO;AAAA,EACpC,qBAAqB,cAAE,OAAO,4BAAe,cAAE,MAAM,cAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAC7E,CAAC;AAED,iBAA+D,IAAI;AAU5D,IAAM,uBAAuB,kBACjC,MAAM,aAAa,EACnB,OAAO;AAAA,EACN,MAAM,cAAE,OAAO;AAAA,EACf,UAAU,aAAa,SAAS;AAAA,EAChC,UAAU,cAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,YAAY,cAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAGH,iBAAqE,IAAI;AAElE,IAAM,SAAS,CAAC,QAAQ,QAAQ,QAAQ,OAAO;AAC/C,IAAM,cAAc;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAEO,IAAM,uBAAuB,sBAAS,GAAG,cAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;;;AIzG1E,IAAAC,cAAkB;AA2CX,IAAM,4BAA4B,cAAE,OAAO;AAAA,EAChD,MAAM,cAAE,MAAM,cAAE,OAAO,CAAC;AAAA,EACxB,WAAW,cAAE,MAAM;AAAA,IACjB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,EAC3B,CAAC;AACH,CAAC;AAEM,IAAM,2BAA2B,cACrC,OAAO;AAAA,EACN,UAAU,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,+BAA+B;AAAA,EACxE,SAAS,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,8BAA8B;AAAA,EACtE,WAAW,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,gCAAgC;AAAA,EAC1E,YAAY,cACT,OAAO,EACP,SAAS,EACT,SAAS,iCAAiC;AAC/C,CAAC,EACA;AAAA,EACC,cAAE,OAAO;AAAA,IACP,cAAc,cAAE,OAAO,EAAE,SAAS;AAAA,IAClC,eAAe,cAAE,OAAO,EAAE,SAAS;AAAA,IACnC,aAAa,cAAE,OAAO,EAAE,SAAS;AAAA,IACjC,gBAAgB,cAAE,OAAO,EAAE,SAAS;AAAA,EACtC,CAAC;AACH,EACC;AAAA,EACC,cAAE,OAAO;AAAA,IACP,UAAU,0BAA0B,SAAS;AAAA,IAC7C,WAAW,0BAA0B,SAAS;AAAA,IAC9C,SAAS,0BAA0B,SAAS;AAAA,IAC5C,YAAY,0BAA0B,SAAS;AAAA,EACjD,CAAC;AACH;AAEF,iBAGE,IAAI;;;ACpFN,IAAAC,cAAkB;AAClB,IAAAC,eAAyB;;;ACDzB,IAAAC,eAAyB;AACzB,IAAAC,cAAkB;AAEX,IAAM,QAAQ,cAAE,OAAO;AAAA,EAC5B,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ADUM,IAAM,aAAa,cAAE,OAAO;AAAA,EACjC,OAAO,sBAAS,SAAS;AAAA,EACzB,QAAQ,sBAAS,SAAS;AAAA,EAC1B,SAAS,cAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EACjC,MAAM,sBAAS,SAAS,EAAE,QAAQ,CAAC;AAAA,EACnC,MAAM,sBAAS,SAAS,EAAE,QAAQ,CAAC;AAAA,EACnC,QAAQ,cAAE,IAAI,EAAE,SAAS;AAAA,EACzB,iBAAiB,cAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,UAAU,cAAE,IAAI;AAClB,CAAC;AAED,iBAAyD,IAAI;;;AE3B7D,IAAAC,eAAkB;AAClB,IAAAC,eAAyB;;;ACDzB,IAAAC,eAAkB;AAClB,IAAAC,eAAyB;AAalB,IAAM,oBAAoB,eAAE;AAAA,EACjC,eAAE,OAAO;AAAA,IACP,YAAY,sBAAS,SAAS;AAAA,IAC9B,aAAa,sBAAS,SAAS;AAAA,IAC/B,WAAW,sBAAS,SAAS;AAAA,IAC7B,cAAc,sBAAS,SAAS;AAAA,EAClC,CAAC;AACH;AAEA,iBAAuE,IAAI;;;ADjBpE,IAAM,YAAY,qBAAqB,OAAO;AAAA,EACnD,wBAAwB,eAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,eAAE,OAAO,eAAE,OAAO,EAAE,GAAG,eAAE,OAAO,CAAC,GAAG,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EAEpE,oBAAoB,yBAAyB,SAAS;AAAA,EACtD,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAe,sBAAS,SAAS;AAAA,EACjC,UAAU,sBAAS,SAAS;AAAA,EAC5B,WAAW,sBAAS,SAAS;AAC/B,CAAC;AAaM,IAAM,WAAW;;;AE5BxB,IAAAC,eAAkB;AASlB,IAAAC,eAAyB;AAkBlB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,wBAAwB,eAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,eAAE,OAAO,eAAE,OAAO,EAAE,GAAG,eAAE,OAAO,CAAC,GAAG,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACpE,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAe,sBAAS,SAAS;AAAA,EACjC,UAAU,sBAAS,SAAS;AAAA,EAC5B,WAAW,sBAAS,SAAS;AAAA,EAC7B,cAAc,eAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACjD,oBAAoB,yBAAyB,SAAS;AACxD,CAAC;AAGD,iBAAmD,IAAI;;;ACvCvD,IAAAC,eAAkB;AAClB,IAAAC,eAA2B;AAgBpB,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AAAA,EAEA,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAU,eAAE,OAAO,EAAE,SAAS;AAAA,EAE9B,aAAa,eAAE,OAAO,EAAE,SAAS;AAAA,EACjC,YAAY,eAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AACM,IAAM,eAAe;AAG5B,iBAAuD,IAAI;;;AC7B3D,IAAAC,eAAkB;AAClB,IAAAC,eAA4B;AAmBrB,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD;AAAA,EAEA,eAAe,eAAE,OAAO,EAAE,SAAS;AAAA,EACnC,cAAc,eAAE,OAAO,EAAE,SAAS;AAAA,EAElC,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAU,eAAE,OAAO,EAAE,SAAS;AAChC,CAAC;AACM,IAAM,gBAAgB;AAE7B,iBAAiE,IAAI;;;AfsB9D,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AACF,CAAC;AACM,IAAM,eAAe;AAGrB,IAAM,aAAa,qBAAqB,OAAO,CAAC,CAAC;AACjD,IAAM,YAAY;AAGlB,IAAM,WAAW,qBAAqB,OAAO;AAAA,EAClD,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AACM,IAAM,UAAU;AAGhB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,YAAY,eAAE,KAAK,CAAC,MAAM,CAAC,EAAE,QAAQ,MAAM;AAAA,EAC3C,kBAAkB,eAAE,QAAQ,EAAE,QAAQ,KAAK;AAC7C,CAAC;AAGM,IAAMC,wBAAuB,uBAAS,GAAG,eAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;AAEnE,IAAM,WAAW,kBAAkB,OAAO;AAAA,EAC/C,WAAW;AAAA,EACX,SAAS;AAAA,EACT,cAAc;AAAA,EACd,eAAe;AACjB,CAAC;AAGM,IAAM,gBAAgB,kBAAkB,OAAO;AAAA,EACpD,KAAK,eAAE,OAAO,EAAE,SAAS;AAC3B,CAAC;AAGM,IAAM,UAAU,eAAE,MAAM;AAAA,EAC7B,eAAE,OAAO;AAAA,EACT,eAAE;AAAA,IAA0C,CAAC,MAC3C,QAAQ,EAAE,eAAe;AAAA,EAC3B;AACF,CAAC;AAEM,IAAM,aAAa,eACvB,OAAO;AAAA,EACN,MAAM,eAAE,MAAM,OAAO;AAAA,EACrB,WAAW,uBAAS,SAAS;AAAA,EAC7B,qBAAqB,eAAE,MAAM,mBAAK,EAAE,SAAS;AAAA,EAC7C,eAAe,eAAE,MAAM,8BAAgB,EAAE,SAAS;AACpD,CAAC,EACA;AAAA,EACC,eAAE,OAAO;AAAA,IACP,MAAM;AAAA,IACN,IAAI;AAAA,IACJ,WAAW,uBAAS,SAAS;AAAA,IAC7B,qBAAqB,eAAE,MAAM,mBAAK,EAAE,SAAS;AAAA,IAC7C,eAAe,eAAE,MAAM,8BAAgB,EAAE,SAAS;AAAA,EACpD,CAAC;AACH;AAGK,IAAM,cAAc,eAAE,MAAM;AAAA,EACjC,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAO,eAAE,QAAQ,QAAQ;AAAA,IACzB,QAAQ,uBAAS,SAAS;AAAA,IAC1B,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAO,eAAE,QAAQ,MAAM;AAAA,IACvB,OAAO,uBAAS,SAAS;AAAA,IACzB,QAAQ,uBAAS,SAAS;AAAA,IAC1B,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AACH,CAAC;AAGM,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,OAAO,eAAE,QAAQ,QAAQ;AAAA,IACzB,cAAc;AAAA,IACd,eAAe;AAAA,IACf,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,OAAO,eAAE,QAAQ,MAAM;AAAA,IACvB,YAAY;AAAA,IACZ,aAAa;AAAA,IACb,YAAY;AAAA,IACZ,aAAa;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AACH,CAAC;AAGM,IAAM,YAAY,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,EACzE,cAAc;AAChB,CAAC;AAGM,IAAM,oBAAoB,eAAE,OAAO;AAAA,EACxC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,MAAM,eAAE,OAAO;AACjB,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AACN,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,QAAQ,eAAE,MAAM,mBAAK;AAAA,EACrB,UAAU,eAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC9C,WAAW,eAAE,KAAK,CAAC,OAAO,MAAM,CAAC,EAAE,SAAS;AAC9C,CAAC;AAGM,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC,eAAE,OAAO;AAAA,IACP,MAAM,eAAE,QAAQ,OAAO;AAAA,IACvB,MAAM;AAAA,IACN,MAAM,eAAE,OAAO;AAAA,IACf,OAAO,eAAE,OAAO;AAAA,EAClB,CAAC;AAAA,EACD,eAAE,OAAO;AAAA,IACP,MAAM,eAAE,QAAQ,OAAO;AAAA,IACvB,MAAM;AAAA,IACN,KAAK,eAAE,OAAO;AAAA,IACd,QAAQ,eAAE,OAAO;AAAA,EACnB,CAAC;AACH,CAAC;AAGM,IAAM,yBAAyB,eAAE,OAAO,CAAC,CAAC;AAG1C,IAAM,iBAAiB,eAAE,OAAO,CAAC,CAAC;AAGlC,IAAM,iBAAiB;AAGvB,IAAM,aAAa,kBAAkB,OAAO;AAAA,EACjD,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,QAAQ,eAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACtD,UAAU,eAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,iBAAiB,eAAE,QAAQ,EAAE,SAAS;AACxC,CAAC;AAGM,IAAM,mBAAmB,qBAAqB,OAAO;AAAA,EAC1D;AACF,CAAC;AAGM,IAAM,YAAY,kBAAkB,OAAO;AAAA,EAChD,MAAM,eAAE,OAAO;AAAA,EACf,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,SAAS,eAAE,MAAM,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC;AACF,CAAC;AAGM,IAAM,sBAAsB,eAAe,OAAO;AAAA,EACvD,MAAM,eAAE,OAAO;AAAA,EACf,iBAAiB,eACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAM,eAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAU,qBAAO,SAAS;AAC5B,CAAC;AAGM,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAO,eAAE,MAAM,8BAAgB;AAAA,EAC/B,aAAa,qBAAO,SAAS;AAC/B,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,aAAa;AAAA,EACb,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AACN,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAU,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAW,eAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAa,uBAAS,SAAS;AAAA,EAC/B,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAGI,IAAM,wBAAwB,eAClC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAU,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAW,eAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAa,uBAAS,SAAS;AAAA,EAC/B,QAAQ;AACV,CAAC;AAGI,IAAM,sBAAsB,eAAE,OAAO;AAAA,EAC1C,GAAG;AAAA,EACH,GAAG;AAAA,EACH,KAAK,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC1B,SAAS,wBAAU,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiB,eAAE,OAAO;AAAA,EACrC,KAAK,eACF,OAAO,EACP,SAAS,EACT;AAAA,IACC;AAAA,EACF;AAAA,EACF,OAAO,eAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,QAAQ,+BAAiB,GAAG,mBAAmB,EAAE,SAAS;AAAA,EAC1D,SAAS,eACN,MAAM,8BAAgB,EACtB,GAAG,eAAE,MAAM,mBAAmB,CAAC,EAC/B,SAAS;AAAA,EACZ,YAAY,eAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAIM,IAAM,gBAAgB,eAAE,OAAO;AAAA,EACpC,OAAO,eAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,WAAW,uBAAS,SAAS;AAAA,EAC7B,OAAO,eAAE,MAAM,8BAAgB;AACjC,CAAC;AAGM,IAAM,2BAA2B,eAAe,OAAO;AAAA,EAC5D,MAAM,eAAE,OAAO;AAAA,EACf,iBAAiB,eACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAM,eAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAU,qBAAO,SAAS;AAC5B,CAAC;AAGM,IAAM,2BAA2B,eACrC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAO,eAAE,MAAM,8BAAgB;AAAA,EAC/B,aAAa,qBAAO,SAAS;AAC/B,CAAC;","names":["distanceOrMultiplier","import_soup","import_zod","import_zod","import_zod","import_soup","import_zod","import_zod","import_zod","import_zod","import_zod","import_soup","import_soup","import_zod","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","distanceOrMultiplier"]}
+{"version":3,"sources":["../lib/index.ts","../lib/typecheck.ts","../lib/common/direction.ts","../lib/common/portHints.ts","../lib/common/layout.ts","../lib/common/point3.ts","../lib/common/cadModel.ts","../lib/common/footprintProp.ts","../lib/common/schematicPinDefinitions.ts","../lib/components/board.ts","../lib/common/point.ts","../lib/components/chip.ts","../lib/common/schematicPinStyle.ts","../lib/components/jumper.ts","../lib/components/resistor.ts","../lib/components/capacitor.ts","../lib/components/group.ts"],"sourcesContent":["/**\n * THINKING ABOUT ADDING SOMETHING TO THIS FILE?\n *\n * THINK AGAIN!\n *\n * This file is TOO BIG! Create files using the pattern in the surrounding\n * directories, then export from this file.\n */\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport {\n  type AnySoupElementInput,\n  capacitance,\n  distance,\n  inductance,\n  layer_ref,\n  length,\n  type PCBPlatedHoleInput,\n  type PCBSMTPadInput,\n  point,\n  resistance,\n  rotation,\n  route_hint_point,\n  supplier_name,\n  voltage,\n} from \"@tscircuit/soup\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\nimport { direction } from \"./common/direction\"\nimport { portHints } from \"./common/portHints\"\nimport {\n  commonComponentProps,\n  commonLayoutProps,\n  lrPins,\n  lrPolarPins,\n  pcbLayoutProps,\n} from \"./common/layout\"\nimport { explicitPinSideDefinition } from \"./common/schematicPinDefinitions\"\n\nexport * from \"./common/direction\"\nexport * from \"./common/portHints\"\nexport * from \"./common/layout\"\nexport * from \"./common/point3\"\nexport * from \"./common/portHints\"\nexport * from \"./common/footprintProp\"\nexport * from \"./common/schematicPinDefinitions\"\n\nexport * from \"./components/board\"\nexport * from \"./components/chip\"\nexport * from \"./components/jumper\"\n\nexport * from \"./components/resistor\"\nexport * from \"./components/capacitor\"\nexport * from \"./components/group\"\nexport const inductorProps = commonComponentProps.extend({\n  inductance,\n})\nexport const inductorPins = lrPins\nexport type InductorProps = z.input<typeof inductorProps>\n\nexport const diodeProps = commonComponentProps.extend({})\nexport const diodePins = lrPolarPins\nexport type DiodeProps = z.input<typeof diodeProps>\n\nexport const ledProps = commonComponentProps.extend({\n  color: z.string().optional(),\n})\nexport const ledPins = lrPolarPins\nexport type LedProps = z.input<typeof ledProps>\n\nexport const switchProps = commonComponentProps.extend({\n  ftype: z.literal(\"switch\"),\n  switchType: z.enum([\"spst\"]).default(\"spst\"),\n  isNormallyClosed: z.boolean().default(false),\n})\nexport type SwitchProps = z.input<typeof switchProps>\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n\nexport const viaProps = commonLayoutProps.extend({\n  fromLayer: layer_ref,\n  toLayer: layer_ref,\n  holeDiameter: distance,\n  outerDiameter: distance,\n})\nexport type ViaProps = z.input<typeof viaProps>\n\nexport const netAliasProps = commonLayoutProps.extend({\n  net: z.string().optional(),\n})\nexport type NetAliasProps = z.input<typeof netAliasProps>\n\nexport const portRef = z.union([\n  z.string(),\n  z.custom<{ getPortSelector: () => string }>((v) =>\n    Boolean(v.getPortSelector),\n  ),\n])\n\nexport const traceProps = z\n  .object({\n    path: z.array(portRef),\n    thickness: distance.optional(),\n    schematicRouteHints: z.array(point).optional(),\n    pcbRouteHints: z.array(route_hint_point).optional(),\n  })\n  .or(\n    z.object({\n      from: portRef,\n      to: portRef,\n      thickness: distance.optional(),\n      schematicRouteHints: z.array(point).optional(),\n      pcbRouteHints: z.array(route_hint_point).optional(),\n    }),\n  )\nexport type TraceProps = z.input<typeof traceProps>\n\nexport const smtPadProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"circle\"),\n    radius: distance.optional(),\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true }).extend({\n    shape: z.literal(\"rect\"),\n    width: distance.optional(),\n    height: distance.optional(),\n    portHints: portHints.optional(),\n  }),\n])\nexport type SmtPadProps = z.input<typeof smtPadProps>\n\nexport const platedHoleProps = z.union([\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    shape: z.literal(\"circle\"),\n    holeDiameter: distance,\n    outerDiameter: distance,\n    portHints: portHints.optional(),\n  }),\n  pcbLayoutProps.omit({ pcbRotation: true, layer: true }).extend({\n    shape: z.literal(\"oval\"),\n    outerWidth: distance,\n    outerHeight: distance,\n    innerWidth: distance,\n    innerHeight: distance,\n    portHints: portHints.optional(),\n  }),\n])\nexport type PlatedHoleProps = z.input<typeof platedHoleProps>\n\nexport const holeProps = pcbLayoutProps.omit({ pcbRotation: true }).extend({\n  holeDiameter: distance,\n})\nexport type HoleProps = z.input<typeof holeProps>\n\nexport const schematicBoxProps = z.object({\n  schX: distance,\n  schY: distance,\n  width: distance,\n  height: distance,\n})\nexport type SchematicBoxProps = z.input<typeof schematicBoxProps>\n\nexport const schematicTextProps = z.object({\n  schX: distance,\n  schY: distance,\n  text: z.string(),\n})\nexport type SchematicTextProps = z.input<typeof schematicTextProps>\n\nexport const schematicLineProps = z.object({\n  x1: distance,\n  y1: distance,\n  x2: distance,\n  y2: distance,\n})\nexport type SchematicLineProps = z.input<typeof schematicLineProps>\n\nexport const schematicPathProps = z.object({\n  points: z.array(point),\n  isFilled: z.boolean().optional().default(false),\n  fillColor: z.enum([\"red\", \"blue\"]).optional(),\n})\nexport type SchematicPathProps = z.input<typeof schematicPathProps>\n\nexport const constraintProps = z.union([\n  z.object({\n    type: z.literal(\"xdist\"),\n    dist: distance,\n    left: z.string(),\n    right: z.string(),\n  }),\n  z.object({\n    type: z.literal(\"ydist\"),\n    dist: distance,\n    top: z.string(),\n    bottom: z.string(),\n  }),\n])\nexport type ConstraintProps = z.input<typeof constraintProps>\n\nexport const constrainedLayoutProps = z.object({})\nexport type ConstrainedLayoutProps = z.input<typeof constrainedLayoutProps>\n\nexport const footprintProps = z.object({})\nexport type FootprintProps = z.input<typeof footprintProps>\n\nexport const componentProps = commonComponentProps\nexport type ComponentProps = z.input<typeof componentProps>\n\nexport const powerSourceProps = commonComponentProps.extend({\n  voltage,\n})\nexport type PowerSourceProps = z.input<typeof powerSourceProps>\n\nexport const portProps = commonLayoutProps.extend({\n  name: z.string(),\n  pinNumber: z.number().optional(),\n  aliases: z.array(z.string()).optional(),\n  direction: direction,\n})\nexport type PortProps = z.input<typeof portProps>\n\nexport const silkscreenTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type SilkscreenTextProps = z.input<typeof silkscreenTextProps>\n\nexport const silkscreenPathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type SilkscreenPathProps = z.input<typeof silkscreenPathProps>\n\nexport const silkscreenLineProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    strokeWidth: distance,\n    x1: distance,\n    y1: distance,\n    x2: distance,\n    y2: distance,\n  })\nexport type SilkscreenLineProps = z.input<typeof silkscreenLineProps>\n\nexport const silkscreenRectProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    width: distance,\n    height: distance,\n  })\nexport type SilkscreenRectProps = z.input<typeof silkscreenRectProps>\n\nexport const silkscreenCircleProps = pcbLayoutProps\n  .omit({ pcbRotation: true })\n  .extend({\n    isFilled: z.boolean().optional(),\n    isOutline: z.boolean().optional(),\n    strokeWidth: distance.optional(),\n    radius: distance,\n  })\nexport type SilkscreenCircleProps = z.input<typeof silkscreenCircleProps>\n\nexport const routeHintPointProps = z.object({\n  x: distance,\n  y: distance,\n  via: z.boolean().optional(),\n  toLayer: layer_ref.optional(),\n})\n\nexport const traceHintProps = z.object({\n  for: z\n    .string()\n    .optional()\n    .describe(\n      \"Selector for the port you're targeting, not required if you're inside a trace\",\n    ),\n  order: z.number().optional(),\n  offset: route_hint_point.or(routeHintPointProps).optional(),\n  offsets: z\n    .array(route_hint_point)\n    .or(z.array(routeHintPointProps))\n    .optional(),\n  traceWidth: z.number().optional(),\n})\n\nexport type TraceHintProps = z.input<typeof traceHintProps>\n\nexport const pcbTraceProps = z.object({\n  layer: z.string().optional(),\n  thickness: distance.optional(),\n  route: z.array(route_hint_point),\n})\nexport type PcbTraceProps = z.input<typeof pcbTraceProps>\n\nexport const fabricationNoteTextProps = pcbLayoutProps.extend({\n  text: z.string(),\n  anchorAlignment: z\n    .enum([\"center\", \"top_left\", \"top_right\", \"bottom_left\", \"bottom_right\"])\n    .default(\"center\"),\n  font: z.enum([\"tscircuit2024\"]).optional(),\n  fontSize: length.optional(),\n})\nexport type FabricationNoteTextProps = z.input<typeof fabricationNoteTextProps>\n\nexport const fabricationNotePathProps = pcbLayoutProps\n  .omit({ pcbX: true, pcbY: true, pcbRotation: true })\n  .extend({\n    route: z.array(route_hint_point),\n    strokeWidth: length.optional(),\n  })\nexport type FabricationNotePathProps = z.input<typeof fabricationNotePathProps>\n","import type { TypeEqual } from \"ts-expect\"\n\nexport const expectTypesMatch = <const T1, const T2>(\n  shouldBe: TypeEqual<T1, T2>,\n): void => {}\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\nexport const direction = z.enum([\"up\", \"down\", \"left\", \"right\"])\nexport type Direction = \"up\" | \"down\" | \"left\" | \"right\"\n\nexport type DirectionAlongEdge =\n  | \"top-to-bottom\"\n  | \"left-to-right\"\n  | \"bottom-to-top\"\n  | \"right-to-left\"\n\nexport const directionAlongEdge = z.enum([\n  \"top-to-bottom\",\n  \"left-to-right\",\n  \"bottom-to-top\",\n  \"right-to-left\",\n])\n\nexpectTypesMatch<Direction, z.infer<typeof direction>>(true)\nexpectTypesMatch<DirectionAlongEdge, z.infer<typeof directionAlongEdge>>(true)\n","import { z } from \"zod\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const portHints = z.array(z.string().or(z.number()))\nexport type PortHints = (string | number)[]\n\nexpectTypesMatch<PortHints, z.infer<typeof portHints>>(true)\n","import { z } from \"zod\"\nimport {\n  type AnySoupElementInput,\n  distance,\n  layer_ref,\n  type LayerRef,\n  type LayerRefInput,\n  rotation,\n  supplier_name,\n} from \"@tscircuit/soup\"\nimport { point3 } from \"./point3\"\nimport {\n  cadModelJscad,\n  cadModelObj,\n  cadModelProp,\n  cadModelStl,\n  type CadModelJscad,\n  type CadModelObj,\n  type CadModelProp,\n  type CadModelStl,\n} from \"./cadModel\"\nimport { footprintProp, type Footprint } from \"./footprintProp\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const pcbLayoutProps = z.object({\n  pcbX: distance,\n  pcbY: distance,\n  pcbRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n})\n\nexport interface CommonLayoutProps {\n  pcbX?: string | number\n  pcbY?: string | number\n  pcbRotation?: string | number\n\n  schX?: string | number\n  schY?: string | number\n  schRotation?: string | number\n\n  layer?: LayerRefInput\n  footprint?: Footprint\n}\n\nexport const commonLayoutProps = z.object({\n  pcbX: distance.optional(),\n  pcbY: distance.optional(),\n  pcbRotation: rotation.optional(),\n  schX: distance.optional(),\n  schY: distance.optional(),\n  schRotation: rotation.optional(),\n  layer: layer_ref.optional(),\n  footprint: footprintProp.optional(),\n})\n\ntype InferredCommonLayoutProps = z.input<typeof commonLayoutProps>\nexpectTypesMatch<CommonLayoutProps, InferredCommonLayoutProps>(true)\n\nexport type SupplierName =\n  | \"jlcpcb\"\n  | \"macrofab\"\n  | \"pcbway\"\n  | \"digikey\"\n  | \"mouser\"\n  | \"lcsc\"\nexport interface SupplierProps {\n  supplierPartNumbers?: { [k in SupplierName]?: string[] }\n}\nexport const supplierProps = z.object({\n  supplierPartNumbers: z.record(supplier_name, z.array(z.string())).optional(),\n})\n\nexpectTypesMatch<SupplierProps, z.input<typeof supplierProps>>(true)\n\nexport interface CommonComponentProps extends CommonLayoutProps {\n  name: string\n  supplierPartNumbers?: SupplierProps[\"supplierPartNumbers\"]\n  cadModel?: CadModelProp\n  children?: any\n  symbolName?: string\n}\n\nexport const commonComponentProps = commonLayoutProps\n  .merge(supplierProps)\n  .extend({\n    name: z.string(),\n    cadModel: cadModelProp.optional(),\n    children: z.any().optional(),\n    symbolName: z.string().optional(),\n  })\n\ntype InferredCommonComponentProps = z.input<typeof commonComponentProps>\nexpectTypesMatch<CommonComponentProps, InferredCommonComponentProps>(true)\n\nexport const lrPins = [\"pin1\", \"left\", \"pin2\", \"right\"] as const\nexport const lrPolarPins = [\n  \"pin1\",\n  \"left\",\n  \"anode\",\n  \"pos\",\n  \"pin2\",\n  \"right\",\n  \"cathode\",\n  \"neg\",\n] as const\n\nexport const distanceOrMultiplier = distance.or(z.enum([\"2x\", \"3x\", \"4x\"]))\n","import { distance } from \"@tscircuit/soup\"\nimport { z } from \"zod\"\n\nexport const point3 = z.object({\n  x: distance,\n  y: distance,\n  z: distance,\n})\n","import { z } from \"zod\"\nimport { point3 } from \"./point3\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport const rotationPoint3 = z.object({\n  x: z.union([z.number(), z.string()]),\n  y: z.union([z.number(), z.string()]),\n  z: z.union([z.number(), z.string()]),\n})\n\nexport interface CadModelBase {\n  rotationOffset?:\n    | number\n    | { x: number | string; y: number | string; z: number | string }\n  positionOffset?: {\n    x: number | string\n    y: number | string\n    z: number | string\n  }\n  size?: { x: number | string; y: number | string; z: number | string }\n}\n\nexport const cadModelBase = z.object({\n  rotationOffset: z.number().or(rotationPoint3).optional(),\n  positionOffset: point3.optional(),\n  size: point3.optional(),\n})\n\nexpectTypesMatch<CadModelBase, z.input<typeof cadModelBase>>(true)\n\nexport interface CadModelStl extends CadModelBase {\n  stlUrl: string\n}\nexport const cadModelStl = cadModelBase.extend({\n  stlUrl: z.string(),\n})\n\nexport interface CadModelObj extends CadModelBase {\n  objUrl: string\n  mtlUrl?: string\n}\nexport const cadModelObj = cadModelBase.extend({\n  objUrl: z.string(),\n  mtlUrl: z.string().optional(),\n})\n\nexport interface CadModelJscad extends CadModelBase {\n  jscad: Record<string, any>\n}\nexport const cadModelJscad = cadModelBase.extend({\n  jscad: z.record(z.any()),\n})\n\nexport type CadModelProp = string | CadModelStl | CadModelObj | CadModelJscad\n\nexport const cadModelProp = z.union([\n  z.string(),\n  cadModelStl,\n  cadModelObj,\n  cadModelJscad,\n])\n\ntype InferredCadModelProp = z.input<typeof cadModelProp>\nexpectTypesMatch<CadModelProp, InferredCadModelProp>(true)\n","import type { LayerRef } from \"@tscircuit/soup\"\nimport type { ReactElement } from \"react\"\nimport { z } from \"zod\"\n\n/**\n * This is an abbreviated definition of the soup elements that you can find here:\n * https://docs.tscircuit.com/api-reference/advanced/soup#pcb-smtpad\n */\nexport type FootprintSoupElements = {\n  type: \"pcb_smtpad\" | \"pcb_plated_hole\"\n  x: string | number\n  y: string | number\n  layer?: LayerRef\n  holeDiameter?: string | number\n  outerDiameter?: string | number\n  shape?: \"circle\" | \"rect\"\n  width?: string | number\n  height?: string | number\n  portHints?: string[]\n}\n\nexport type Footprint = string | ReactElement | FootprintSoupElements[]\nexport const footprintProp = z.custom<Footprint>((v) => true)\n","import { expectTypesMatch } from \"lib/typecheck\"\nimport { z } from \"zod\"\n\n/**\n * @deprecated Use SchematicPortArrangementWithPinCounts instead.\n */\nexport interface SchematicPortArrangementWithSizes {\n  leftSize?: number\n  topSize?: number\n  rightSize?: number\n  bottomSize?: number\n}\n\n/**\n * Specifies the number of pins on each side of the schematic box component.\n */\nexport interface SchematicPortArrangementWithPinCounts {\n  leftPinCount?: number\n  topPinCount?: number\n  rightPinCount?: number\n  bottomPinCount?: number\n}\n\nexport interface PinSideDefinition {\n  pins: number[]\n  direction:\n    | \"top-to-bottom\"\n    | \"left-to-right\"\n    | \"bottom-to-top\"\n    | \"right-to-left\"\n}\n\nexport interface SchematicPortArrangementWithSides {\n  leftSide?: PinSideDefinition\n  topSide?: PinSideDefinition\n  rightSide?: PinSideDefinition\n  bottomSide?: PinSideDefinition\n}\n\nexport type SchematicPortArrangement =\n  | SchematicPortArrangementWithSizes\n  | SchematicPortArrangementWithSides\n  | SchematicPortArrangementWithPinCounts\n\nexport const explicitPinSideDefinition = z.object({\n  pins: z.array(z.number()),\n  direction: z.union([\n    z.literal(\"top-to-bottom\"),\n    z.literal(\"left-to-right\"),\n    z.literal(\"bottom-to-top\"),\n    z.literal(\"right-to-left\"),\n  ]),\n})\n\nexport const schematicPortArrangement = z\n  .object({\n    leftSize: z.number().optional().describe(\"@deprecated, use leftPinCount\"),\n    topSize: z.number().optional().describe(\"@deprecated, use topPinCount\"),\n    rightSize: z.number().optional().describe(\"@deprecated, use rightPinCount\"),\n    bottomSize: z\n      .number()\n      .optional()\n      .describe(\"@deprecated, use bottomPinCount\"),\n  })\n  .or(\n    z.object({\n      leftPinCount: z.number().optional(),\n      rightPinCount: z.number().optional(),\n      topPinCount: z.number().optional(),\n      bottomPinCount: z.number().optional(),\n    }),\n  )\n  .or(\n    z.object({\n      leftSide: explicitPinSideDefinition.optional(),\n      rightSide: explicitPinSideDefinition.optional(),\n      topSide: explicitPinSideDefinition.optional(),\n      bottomSide: explicitPinSideDefinition.optional(),\n    }),\n  )\n\nexpectTypesMatch<\n  SchematicPortArrangement,\n  z.input<typeof schematicPortArrangement>\n>(true)\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { point, type Point } from \"lib/common/point\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface BoardProps {\n  width?: number | string\n  height?: number | string\n  outline?: Point[]\n  pcbX?: number | string\n  pcbY?: number | string\n  layout?: any\n  routingDisabled?: boolean\n  children?: any\n}\n\nexport const boardProps = z.object({\n  width: distance.optional(),\n  height: distance.optional(),\n  outline: z.array(point).optional(),\n  pcbX: distance.optional().default(0),\n  pcbY: distance.optional().default(0),\n  layout: z.any().optional(),\n  routingDisabled: z.boolean().optional(),\n  children: z.any(),\n})\n\nexpectTypesMatch<BoardProps, z.input<typeof boardProps>>(true)\n","import { distance } from \"@tscircuit/soup\"\nimport { z } from \"zod\"\n\nexport const point = z.object({\n  x: distance,\n  y: distance,\n})\n\nexport type Point = { x: number | string; y: number | string }\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { commonComponentProps } from \"lib/common/layout\"\nimport { schematicPortArrangement } from \"lib/common/schematicPinDefinitions\"\nimport { schematicPinStyle } from \"lib/common/schematicPinStyle\"\n\nexport const chipProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z.record(z.number().or(z.string()), z.string()).optional(),\n\n  schPortArrangement: schematicPortArrangement.optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n})\n\nexport type SchematicPinStyle = {\n  leftMargin?: number | string\n  rightMargin?: number | string\n  topMargin?: number | string\n  bottomMargin?: number | string\n}\nexport type SchematicPinStyles = Record<string, SchematicPinStyle>\n\n/**\n * @deprecated Use ChipProps instead.\n */\nexport const bugProps = chipProps\nexport type ChipProps = z.input<typeof chipProps>\n","import { z } from \"zod\"\nimport { distance } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport type SchematicPinStyle = Record<\n  string,\n  {\n    leftMargin?: number | string\n    rightMargin?: number | string\n    topMargin?: number | string\n    bottomMargin?: number | string\n  }\n>\n\nexport const schematicPinStyle = z.record(\n  z.object({\n    leftMargin: distance.optional(),\n    rightMargin: distance.optional(),\n    topMargin: distance.optional(),\n    bottomMargin: distance.optional(),\n  }),\n)\n\nexpectTypesMatch<SchematicPinStyle, z.input<typeof schematicPinStyle>>(true)\n","import { z } from \"zod\"\nimport {\n  commonComponentProps,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport {\n  schematicPinStyle,\n  type SchematicPinStyle,\n} from \"lib/common/schematicPinStyle\"\nimport { distance } from \"@tscircuit/soup\"\nimport { expectTypesMatch } from \"lib/typecheck\"\nimport {\n  schematicPortArrangement,\n  type SchematicPortArrangement,\n} from \"lib/common/schematicPinDefinitions\"\n\nexport interface JumperProps extends CommonComponentProps {\n  manufacturerPartNumber?: string\n  pinLabels?: Record<number | string, string>\n  schPinStyle?: SchematicPinStyle\n  schPinSpacing?: number | string\n  schWidth?: number | string\n  schHeight?: number | string\n  schDirection?: \"left\" | \"right\"\n  schPortArrangement?: SchematicPortArrangement\n}\n\nexport const jumperProps = commonComponentProps.extend({\n  manufacturerPartNumber: z.string().optional(),\n  pinLabels: z.record(z.number().or(z.string()), z.string()).optional(),\n  schPinStyle: schematicPinStyle.optional(),\n  schPinSpacing: distance.optional(),\n  schWidth: distance.optional(),\n  schHeight: distance.optional(),\n  schDirection: z.enum([\"left\", \"right\"]).optional(),\n  schPortArrangement: schematicPortArrangement.optional(),\n})\n\ntype InferredJumperProps = z.input<typeof jumperProps>\nexpectTypesMatch<JumperProps, InferredJumperProps>(true)\n","import { z } from \"zod\"\nimport { resistance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  lrPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface ResistorProps extends CommonComponentProps {\n  resistance: number | string\n  pullupFor?: string\n  pullupTo?: string\n  pulldownFor?: string\n  pulldownTo?: string\n}\n\nexport const resistorProps = commonComponentProps.extend({\n  resistance,\n\n  pullupFor: z.string().optional(),\n  pullupTo: z.string().optional(),\n\n  pulldownFor: z.string().optional(),\n  pulldownTo: z.string().optional(),\n})\nexport const resistorPins = lrPins\n\ntype InferredResistorProps = z.input<typeof resistorProps>\nexpectTypesMatch<ResistorProps, InferredResistorProps>(true)\n","import { z } from \"zod\"\nimport { capacitance } from \"@tscircuit/soup\"\nimport {\n  commonComponentProps,\n  lrPins,\n  lrPolarPins,\n  type CommonComponentProps,\n} from \"lib/common/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface CapacitorProps extends CommonComponentProps {\n  capacitance: number | string\n\n  decouplingFor?: string\n  decouplingTo?: string\n\n  bypassFor?: string\n  bypassTo?: string\n}\n\nexport const capacitorProps = commonComponentProps.extend({\n  capacitance,\n\n  decouplingFor: z.string().optional(),\n  decouplingTo: z.string().optional(),\n\n  bypassFor: z.string().optional(),\n  bypassTo: z.string().optional(),\n})\nexport const capacitorPins = lrPolarPins\n\nexpectTypesMatch<CapacitorProps, z.input<typeof capacitorProps>>(true)\n","import { z } from \"zod\"\nimport { commonLayoutProps, type CommonLayoutProps } from \"lib/common/layout\"\nimport type { LayoutBuilder } from \"@tscircuit/layout\"\nimport { expectTypesMatch } from \"lib/typecheck\"\n\nexport interface GroupProps extends CommonLayoutProps {\n  name?: string\n  layout?: LayoutBuilder\n  children?: any\n  routingDisabled?: boolean\n}\n\nexport const groupProps = commonLayoutProps.extend({\n  name: z.string().optional(),\n  layout: z.custom<LayoutBuilder>((v) => true).optional(),\n  children: z.any().optional(),\n  routingDisabled: z.boolean().optional(),\n})\n\nexport type InferredGroupProps = z.input<typeof groupProps>\nexpectTypesMatch<GroupProps, InferredGroupProps>(true)\n"],"mappings":";;;;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,8BAAAA;AAAA,EAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AASA,IAAAC,gBAeO;AAEP,IAAAC,eAAkB;;;ACxBX,IAAM,mBAAmB,CAC9B,aACS;AAAC;;;ACHZ,iBAAkB;AACX,IAAM,YAAY,aAAE,KAAK,CAAC,MAAM,QAAQ,QAAQ,OAAO,CAAC;AASxD,IAAM,qBAAqB,aAAE,KAAK;AAAA,EACvC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,iBAAuD,IAAI;AAC3D,iBAAyE,IAAI;;;ACnB7E,IAAAC,cAAkB;AAGX,IAAM,YAAY,cAAE,MAAM,cAAE,OAAO,EAAE,GAAG,cAAE,OAAO,CAAC,CAAC;AAG1D,iBAAuD,IAAI;;;ACN3D,IAAAC,cAAkB;AAClB,IAAAC,eAQO;;;ACTP,kBAAyB;AACzB,IAAAC,cAAkB;AAEX,IAAM,SAAS,cAAE,OAAO;AAAA,EAC7B,GAAG;AAAA,EACH,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ACPD,IAAAC,cAAkB;AAIX,IAAM,iBAAiB,cAAE,OAAO;AAAA,EACrC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AAAA,EACnC,GAAG,cAAE,MAAM,CAAC,cAAE,OAAO,GAAG,cAAE,OAAO,CAAC,CAAC;AACrC,CAAC;AAcM,IAAM,eAAe,cAAE,OAAO;AAAA,EACnC,gBAAgB,cAAE,OAAO,EAAE,GAAG,cAAc,EAAE,SAAS;AAAA,EACvD,gBAAgB,OAAO,SAAS;AAAA,EAChC,MAAM,OAAO,SAAS;AACxB,CAAC;AAED,iBAA6D,IAAI;AAK1D,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQ,cAAE,OAAO;AACnB,CAAC;AAMM,IAAM,cAAc,aAAa,OAAO;AAAA,EAC7C,QAAQ,cAAE,OAAO;AAAA,EACjB,QAAQ,cAAE,OAAO,EAAE,SAAS;AAC9B,CAAC;AAKM,IAAM,gBAAgB,aAAa,OAAO;AAAA,EAC/C,OAAO,cAAE,OAAO,cAAE,IAAI,CAAC;AACzB,CAAC;AAIM,IAAM,eAAe,cAAE,MAAM;AAAA,EAClC,cAAE,OAAO;AAAA,EACT;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAGD,iBAAqD,IAAI;;;AC7DzD,IAAAC,cAAkB;AAoBX,IAAM,gBAAgB,cAAE,OAAkB,CAAC,MAAM,IAAI;;;AHErD,IAAM,iBAAiB,cAAE,OAAO;AAAA,EACrC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,aAAa,sBAAS,SAAS;AAAA,EAC/B,OAAO,uBAAU,SAAS;AAC5B,CAAC;AAeM,IAAM,oBAAoB,cAAE,OAAO;AAAA,EACxC,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,MAAM,sBAAS,SAAS;AAAA,EACxB,MAAM,sBAAS,SAAS;AAAA,EACxB,aAAa,sBAAS,SAAS;AAAA,EAC/B,OAAO,uBAAU,SAAS;AAAA,EAC1B,WAAW,cAAc,SAAS;AACpC,CAAC;AAGD,iBAA+D,IAAI;AAY5D,IAAM,gBAAgB,cAAE,OAAO;AAAA,EACpC,qBAAqB,cAAE,OAAO,4BAAe,cAAE,MAAM,cAAE,OAAO,CAAC,CAAC,EAAE,SAAS;AAC7E,CAAC;AAED,iBAA+D,IAAI;AAU5D,IAAM,uBAAuB,kBACjC,MAAM,aAAa,EACnB,OAAO;AAAA,EACN,MAAM,cAAE,OAAO;AAAA,EACf,UAAU,aAAa,SAAS;AAAA,EAChC,UAAU,cAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,YAAY,cAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAGH,iBAAqE,IAAI;AAElE,IAAM,SAAS,CAAC,QAAQ,QAAQ,QAAQ,OAAO;AAC/C,IAAM,cAAc;AAAA,EACzB;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;AAEO,IAAM,uBAAuB,sBAAS,GAAG,cAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;;;AIzG1E,IAAAC,cAAkB;AA2CX,IAAM,4BAA4B,cAAE,OAAO;AAAA,EAChD,MAAM,cAAE,MAAM,cAAE,OAAO,CAAC;AAAA,EACxB,WAAW,cAAE,MAAM;AAAA,IACjB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,IACzB,cAAE,QAAQ,eAAe;AAAA,EAC3B,CAAC;AACH,CAAC;AAEM,IAAM,2BAA2B,cACrC,OAAO;AAAA,EACN,UAAU,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,+BAA+B;AAAA,EACxE,SAAS,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,8BAA8B;AAAA,EACtE,WAAW,cAAE,OAAO,EAAE,SAAS,EAAE,SAAS,gCAAgC;AAAA,EAC1E,YAAY,cACT,OAAO,EACP,SAAS,EACT,SAAS,iCAAiC;AAC/C,CAAC,EACA;AAAA,EACC,cAAE,OAAO;AAAA,IACP,cAAc,cAAE,OAAO,EAAE,SAAS;AAAA,IAClC,eAAe,cAAE,OAAO,EAAE,SAAS;AAAA,IACnC,aAAa,cAAE,OAAO,EAAE,SAAS;AAAA,IACjC,gBAAgB,cAAE,OAAO,EAAE,SAAS;AAAA,EACtC,CAAC;AACH,EACC;AAAA,EACC,cAAE,OAAO;AAAA,IACP,UAAU,0BAA0B,SAAS;AAAA,IAC7C,WAAW,0BAA0B,SAAS;AAAA,IAC9C,SAAS,0BAA0B,SAAS;AAAA,IAC5C,YAAY,0BAA0B,SAAS;AAAA,EACjD,CAAC;AACH;AAEF,iBAGE,IAAI;;;ACpFN,IAAAC,cAAkB;AAClB,IAAAC,eAAyB;;;ACDzB,IAAAC,eAAyB;AACzB,IAAAC,cAAkB;AAEX,IAAM,QAAQ,cAAE,OAAO;AAAA,EAC5B,GAAG;AAAA,EACH,GAAG;AACL,CAAC;;;ADUM,IAAM,aAAa,cAAE,OAAO;AAAA,EACjC,OAAO,sBAAS,SAAS;AAAA,EACzB,QAAQ,sBAAS,SAAS;AAAA,EAC1B,SAAS,cAAE,MAAM,KAAK,EAAE,SAAS;AAAA,EACjC,MAAM,sBAAS,SAAS,EAAE,QAAQ,CAAC;AAAA,EACnC,MAAM,sBAAS,SAAS,EAAE,QAAQ,CAAC;AAAA,EACnC,QAAQ,cAAE,IAAI,EAAE,SAAS;AAAA,EACzB,iBAAiB,cAAE,QAAQ,EAAE,SAAS;AAAA,EACtC,UAAU,cAAE,IAAI;AAClB,CAAC;AAED,iBAAyD,IAAI;;;AE3B7D,IAAAC,eAAkB;AAClB,IAAAC,eAAyB;;;ACDzB,IAAAC,eAAkB;AAClB,IAAAC,eAAyB;AAalB,IAAM,oBAAoB,eAAE;AAAA,EACjC,eAAE,OAAO;AAAA,IACP,YAAY,sBAAS,SAAS;AAAA,IAC9B,aAAa,sBAAS,SAAS;AAAA,IAC/B,WAAW,sBAAS,SAAS;AAAA,IAC7B,cAAc,sBAAS,SAAS;AAAA,EAClC,CAAC;AACH;AAEA,iBAAuE,IAAI;;;ADjBpE,IAAM,YAAY,qBAAqB,OAAO;AAAA,EACnD,wBAAwB,eAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,eAAE,OAAO,eAAE,OAAO,EAAE,GAAG,eAAE,OAAO,CAAC,GAAG,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EAEpE,oBAAoB,yBAAyB,SAAS;AAAA,EACtD,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAe,sBAAS,SAAS;AAAA,EACjC,UAAU,sBAAS,SAAS;AAAA,EAC5B,WAAW,sBAAS,SAAS;AAC/B,CAAC;AAaM,IAAM,WAAW;;;AE5BxB,IAAAC,eAAkB;AASlB,IAAAC,eAAyB;AAkBlB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,wBAAwB,eAAE,OAAO,EAAE,SAAS;AAAA,EAC5C,WAAW,eAAE,OAAO,eAAE,OAAO,EAAE,GAAG,eAAE,OAAO,CAAC,GAAG,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACpE,aAAa,kBAAkB,SAAS;AAAA,EACxC,eAAe,sBAAS,SAAS;AAAA,EACjC,UAAU,sBAAS,SAAS;AAAA,EAC5B,WAAW,sBAAS,SAAS;AAAA,EAC7B,cAAc,eAAE,KAAK,CAAC,QAAQ,OAAO,CAAC,EAAE,SAAS;AAAA,EACjD,oBAAoB,yBAAyB,SAAS;AACxD,CAAC;AAGD,iBAAmD,IAAI;;;ACvCvD,IAAAC,eAAkB;AAClB,IAAAC,eAA2B;AAgBpB,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AAAA,EAEA,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAU,eAAE,OAAO,EAAE,SAAS;AAAA,EAE9B,aAAa,eAAE,OAAO,EAAE,SAAS;AAAA,EACjC,YAAY,eAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AACM,IAAM,eAAe;AAG5B,iBAAuD,IAAI;;;AC7B3D,IAAAC,eAAkB;AAClB,IAAAC,eAA4B;AAmBrB,IAAM,iBAAiB,qBAAqB,OAAO;AAAA,EACxD;AAAA,EAEA,eAAe,eAAE,OAAO,EAAE,SAAS;AAAA,EACnC,cAAc,eAAE,OAAO,EAAE,SAAS;AAAA,EAElC,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,UAAU,eAAE,OAAO,EAAE,SAAS;AAChC,CAAC;AACM,IAAM,gBAAgB;AAE7B,iBAAiE,IAAI;;;AC/BrE,IAAAC,eAAkB;AAYX,IAAM,aAAa,kBAAkB,OAAO;AAAA,EACjD,MAAM,eAAE,OAAO,EAAE,SAAS;AAAA,EAC1B,QAAQ,eAAE,OAAsB,CAAC,MAAM,IAAI,EAAE,SAAS;AAAA,EACtD,UAAU,eAAE,IAAI,EAAE,SAAS;AAAA,EAC3B,iBAAiB,eAAE,QAAQ,EAAE,SAAS;AACxC,CAAC;AAGD,iBAAiD,IAAI;;;AhBiC9C,IAAM,gBAAgB,qBAAqB,OAAO;AAAA,EACvD;AACF,CAAC;AACM,IAAM,eAAe;AAGrB,IAAM,aAAa,qBAAqB,OAAO,CAAC,CAAC;AACjD,IAAM,YAAY;AAGlB,IAAM,WAAW,qBAAqB,OAAO;AAAA,EAClD,OAAO,eAAE,OAAO,EAAE,SAAS;AAC7B,CAAC;AACM,IAAM,UAAU;AAGhB,IAAM,cAAc,qBAAqB,OAAO;AAAA,EACrD,OAAO,eAAE,QAAQ,QAAQ;AAAA,EACzB,YAAY,eAAE,KAAK,CAAC,MAAM,CAAC,EAAE,QAAQ,MAAM;AAAA,EAC3C,kBAAkB,eAAE,QAAQ,EAAE,QAAQ,KAAK;AAC7C,CAAC;AAGM,IAAMC,wBAAuB,uBAAS,GAAG,eAAE,KAAK,CAAC,MAAM,MAAM,IAAI,CAAC,CAAC;AAEnE,IAAM,WAAW,kBAAkB,OAAO;AAAA,EAC/C,WAAW;AAAA,EACX,SAAS;AAAA,EACT,cAAc;AAAA,EACd,eAAe;AACjB,CAAC;AAGM,IAAM,gBAAgB,kBAAkB,OAAO;AAAA,EACpD,KAAK,eAAE,OAAO,EAAE,SAAS;AAC3B,CAAC;AAGM,IAAM,UAAU,eAAE,MAAM;AAAA,EAC7B,eAAE,OAAO;AAAA,EACT,eAAE;AAAA,IAA0C,CAAC,MAC3C,QAAQ,EAAE,eAAe;AAAA,EAC3B;AACF,CAAC;AAEM,IAAM,aAAa,eACvB,OAAO;AAAA,EACN,MAAM,eAAE,MAAM,OAAO;AAAA,EACrB,WAAW,uBAAS,SAAS;AAAA,EAC7B,qBAAqB,eAAE,MAAM,mBAAK,EAAE,SAAS;AAAA,EAC7C,eAAe,eAAE,MAAM,8BAAgB,EAAE,SAAS;AACpD,CAAC,EACA;AAAA,EACC,eAAE,OAAO;AAAA,IACP,MAAM;AAAA,IACN,IAAI;AAAA,IACJ,WAAW,uBAAS,SAAS;AAAA,IAC7B,qBAAqB,eAAE,MAAM,mBAAK,EAAE,SAAS;AAAA,IAC7C,eAAe,eAAE,MAAM,8BAAgB,EAAE,SAAS;AAAA,EACpD,CAAC;AACH;AAGK,IAAM,cAAc,eAAE,MAAM;AAAA,EACjC,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAO,eAAE,QAAQ,QAAQ;AAAA,IACzB,QAAQ,uBAAS,SAAS;AAAA,IAC1B,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,IAChD,OAAO,eAAE,QAAQ,MAAM;AAAA,IACvB,OAAO,uBAAS,SAAS;AAAA,IACzB,QAAQ,uBAAS,SAAS;AAAA,IAC1B,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AACH,CAAC;AAGM,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,OAAO,eAAE,QAAQ,QAAQ;AAAA,IACzB,cAAc;AAAA,IACd,eAAe;AAAA,IACf,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AAAA,EACD,eAAe,KAAK,EAAE,aAAa,MAAM,OAAO,KAAK,CAAC,EAAE,OAAO;AAAA,IAC7D,OAAO,eAAE,QAAQ,MAAM;AAAA,IACvB,YAAY;AAAA,IACZ,aAAa;AAAA,IACb,YAAY;AAAA,IACZ,aAAa;AAAA,IACb,WAAW,UAAU,SAAS;AAAA,EAChC,CAAC;AACH,CAAC;AAGM,IAAM,YAAY,eAAe,KAAK,EAAE,aAAa,KAAK,CAAC,EAAE,OAAO;AAAA,EACzE,cAAc;AAChB,CAAC;AAGM,IAAM,oBAAoB,eAAE,OAAO;AAAA,EACxC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,MAAM;AAAA,EACN,MAAM;AAAA,EACN,MAAM,eAAE,OAAO;AACjB,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AACN,CAAC;AAGM,IAAM,qBAAqB,eAAE,OAAO;AAAA,EACzC,QAAQ,eAAE,MAAM,mBAAK;AAAA,EACrB,UAAU,eAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,KAAK;AAAA,EAC9C,WAAW,eAAE,KAAK,CAAC,OAAO,MAAM,CAAC,EAAE,SAAS;AAC9C,CAAC;AAGM,IAAM,kBAAkB,eAAE,MAAM;AAAA,EACrC,eAAE,OAAO;AAAA,IACP,MAAM,eAAE,QAAQ,OAAO;AAAA,IACvB,MAAM;AAAA,IACN,MAAM,eAAE,OAAO;AAAA,IACf,OAAO,eAAE,OAAO;AAAA,EAClB,CAAC;AAAA,EACD,eAAE,OAAO;AAAA,IACP,MAAM,eAAE,QAAQ,OAAO;AAAA,IACvB,MAAM;AAAA,IACN,KAAK,eAAE,OAAO;AAAA,IACd,QAAQ,eAAE,OAAO;AAAA,EACnB,CAAC;AACH,CAAC;AAGM,IAAM,yBAAyB,eAAE,OAAO,CAAC,CAAC;AAG1C,IAAM,iBAAiB,eAAE,OAAO,CAAC,CAAC;AAGlC,IAAM,iBAAiB;AAGvB,IAAM,mBAAmB,qBAAqB,OAAO;AAAA,EAC1D;AACF,CAAC;AAGM,IAAM,YAAY,kBAAkB,OAAO;AAAA,EAChD,MAAM,eAAE,OAAO;AAAA,EACf,WAAW,eAAE,OAAO,EAAE,SAAS;AAAA,EAC/B,SAAS,eAAE,MAAM,eAAE,OAAO,CAAC,EAAE,SAAS;AAAA,EACtC;AACF,CAAC;AAGM,IAAM,sBAAsB,eAAe,OAAO;AAAA,EACvD,MAAM,eAAE,OAAO;AAAA,EACf,iBAAiB,eACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAM,eAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAU,qBAAO,SAAS;AAC5B,CAAC;AAGM,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAO,eAAE,MAAM,8BAAgB;AAAA,EAC/B,aAAa,qBAAO,SAAS;AAC/B,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,aAAa;AAAA,EACb,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AAAA,EACJ,IAAI;AACN,CAAC;AAGI,IAAM,sBAAsB,eAChC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAU,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAW,eAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAa,uBAAS,SAAS;AAAA,EAC/B,OAAO;AAAA,EACP,QAAQ;AACV,CAAC;AAGI,IAAM,wBAAwB,eAClC,KAAK,EAAE,aAAa,KAAK,CAAC,EAC1B,OAAO;AAAA,EACN,UAAU,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC/B,WAAW,eAAE,QAAQ,EAAE,SAAS;AAAA,EAChC,aAAa,uBAAS,SAAS;AAAA,EAC/B,QAAQ;AACV,CAAC;AAGI,IAAM,sBAAsB,eAAE,OAAO;AAAA,EAC1C,GAAG;AAAA,EACH,GAAG;AAAA,EACH,KAAK,eAAE,QAAQ,EAAE,SAAS;AAAA,EAC1B,SAAS,wBAAU,SAAS;AAC9B,CAAC;AAEM,IAAM,iBAAiB,eAAE,OAAO;AAAA,EACrC,KAAK,eACF,OAAO,EACP,SAAS,EACT;AAAA,IACC;AAAA,EACF;AAAA,EACF,OAAO,eAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,QAAQ,+BAAiB,GAAG,mBAAmB,EAAE,SAAS;AAAA,EAC1D,SAAS,eACN,MAAM,8BAAgB,EACtB,GAAG,eAAE,MAAM,mBAAmB,CAAC,EAC/B,SAAS;AAAA,EACZ,YAAY,eAAE,OAAO,EAAE,SAAS;AAClC,CAAC;AAIM,IAAM,gBAAgB,eAAE,OAAO;AAAA,EACpC,OAAO,eAAE,OAAO,EAAE,SAAS;AAAA,EAC3B,WAAW,uBAAS,SAAS;AAAA,EAC7B,OAAO,eAAE,MAAM,8BAAgB;AACjC,CAAC;AAGM,IAAM,2BAA2B,eAAe,OAAO;AAAA,EAC5D,MAAM,eAAE,OAAO;AAAA,EACf,iBAAiB,eACd,KAAK,CAAC,UAAU,YAAY,aAAa,eAAe,cAAc,CAAC,EACvE,QAAQ,QAAQ;AAAA,EACnB,MAAM,eAAE,KAAK,CAAC,eAAe,CAAC,EAAE,SAAS;AAAA,EACzC,UAAU,qBAAO,SAAS;AAC5B,CAAC;AAGM,IAAM,2BAA2B,eACrC,KAAK,EAAE,MAAM,MAAM,MAAM,MAAM,aAAa,KAAK,CAAC,EAClD,OAAO;AAAA,EACN,OAAO,eAAE,MAAM,8BAAgB;AAAA,EAC/B,aAAa,qBAAO,SAAS;AAC/B,CAAC;","names":["distanceOrMultiplier","import_soup","import_zod","import_zod","import_zod","import_soup","import_zod","import_zod","import_zod","import_zod","import_zod","import_soup","import_soup","import_zod","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","import_soup","import_zod","distanceOrMultiplier"]}

package/lib/components/group.ts

@@ -0,0 +1,21 @@
+import { z } from "zod"
+import { commonLayoutProps, type CommonLayoutProps } from "lib/common/layout"
+import type { LayoutBuilder } from "@tscircuit/layout"
+import { expectTypesMatch } from "lib/typecheck"
+
+export interface GroupProps extends CommonLayoutProps {
+  name?: string
+  layout?: LayoutBuilder
+  children?: any
+  routingDisabled?: boolean
+}
+
+export const groupProps = commonLayoutProps.extend({
+  name: z.string().optional(),
+  layout: z.custom<LayoutBuilder>((v) => true).optional(),
+  children: z.any().optional(),
+  routingDisabled: z.boolean().optional(),
+})
+
+export type InferredGroupProps = z.input<typeof groupProps>
+expectTypesMatch<GroupProps, InferredGroupProps>(true)

package/lib/index.ts

@@ -50,7 +50,7 @@ export * from "./components/jumper"
 
 export * from "./components/resistor"
 export * from "./components/capacitor"
-
+export * from "./components/group"
 export const inductorProps = commonComponentProps.extend({
   inductance,
 })
@@ -207,14 +207,6 @@ export type FootprintProps = z.input<typeof footprintProps>
 export const componentProps = commonComponentProps
 export type ComponentProps = z.input<typeof componentProps>
 
-export const groupProps = commonLayoutProps.extend({
-  name: z.string().optional(),
-  layout: z.custom<LayoutBuilder>((v) => true).optional(),
-  children: z.any().optional(),
-  routingDisabled: z.boolean().optional(),
-})
-export type GroupProps = z.input<typeof groupProps>
-
 export const powerSourceProps = commonComponentProps.extend({
   voltage,
 })

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@tscircuit/props",
-  "version": "0.0.49",
+  "version": "0.0.50",
   "description": "Props for tscircuit builtin component types",
   "main": "dist/index.js",
   "scripts": {